Furnitubes - Bollards Brochure.
-
Upload
the-facilities-and-estates-directory -
Category
Documents
-
view
239 -
download
2
description
Transcript of Furnitubes - Bollards Brochure.
BOLLARDS BROCHURE
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
�B
OLL
AR
DS
▼ B
ATT
LE R
emov
able
at
st G
eorg
e’s
Wha
rf, V
auxh
all,
Lond
on
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
Ent
er s
peci
fic to
pic
here
�1BOLLARDS
the fundamental use of bollards is to segregate vehicles from pedestrians, buildings, and stonework. in addition, bollards can be used as a means of traffic calming due to increased traffic and population levels. they have also been adapted as a security measure against ram-raiding.
furnitubes offer over 200 bollards in a variety of designs and materials, including fixed removable, base plated and telescopic.
Cast Iron & Aluminium 10
Power 26
Traffic Bollards Introduction 27
Avector 28
Bell® 29
Lambeth® 34
Luton 34
District 35
Steel & Composite 36
Linx™ Composite 46
Stainless Steel 50
Access Control 57
Removable Sockets 59
F1 Removable Sockets 60
Burr Bloc 62
Car Park Posts 64
Telescopic Posts 66
Timber 68
Plastic 72
Recycled Plastic 76
Recycled Timber 77
Accessories 78
Special Commissions 79
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
10▼
WA
RM
INST
ER S
QU
AR
E BA
SE R
emov
able
sup
plie
d to
bro
adw
ick
stre
et, c
ity o
f Lon
don
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
11
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
bollards over 1000mm in height can aid the visually impaired and can assist with the requirements of the recent bs8300 guidelines.
▲ CITY supplied to city of Westminster, London
TRAFALGAR ▲installed in Greenwich, London
▲ HAMMERSMITHsupplied to Hammersmith, London
MANCHESTER ROUND BASE ►installed at uxbridge, middlesex
DORIC ►installed in euginia Road, London
CAST IRON & ALUMINIUMbollards
cast iron bollards have been used as early as from the eighteenth century. they are durable, strong and can be easily cast into several shapes and styles.
furnitubes offers more than fifty cast iron bollards, with the majority of these available from stock. many, like the Manchester and Trafalgar, are as substantial and ornate as the Victorian originals they replicate. others, such as the City and the Capital, have been designed to balance the need for strength and protection with the desire for modern aesthetics within a changing landscape.
A comprehensive range of styles, sizes and options are available, enabling specifiers to meet site requirements such as aluminium removable versions, service bollards or taller bollards to suit the visually impaired.
new bollards can be manufactured to any given specification. As a result, the variety available is constantly increasing and it is advisable to ask about new products when making an enquiry.
CANNON ▲installed in Piccadilly, London
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
12B
OLL
AR
DS
HIGHLIGHTING most bollards can be enhanced by highlighting specif ic features in a contrasting
colour. metallic gold and silver are available in addition to standard RAL & bs colours. for applications that require higher visibility, furnitubes also offer
ref lective tape in either white, red or yellow - see page 78.
STANDARD ADAPTATIONSmany of furnitubes’ bollards can be adapted to suit other applications, for example, the popular cannon bollard can serve as a feeder post, cycle rack, railing post or as a base for f inger and lamp columns. furnitubes’ staff can provide information on the correct positioning and most appropriate bollard for particular applications. Please call sales to discuss the full range of possibilities.
▲ CANNON 2-RAILsupplied to Lb Hammersmith
▲ WARMINSTER MEDIUM with white tapesupplied to brighton and Hove council
▲ CORPORATIONwith white and red painted stripsshown here at Littlehampton, West sussex
▲ WARMINSTER Round Basepainted green with gold highlightinginstalled at Letchworth, Hertfordshire
480
480
cannon 2-rail
CAN500 EP end Post cast iron
CAN500 IPintermediate Postcast iron
▲ CANNON Removableinstalled in city of Westminster, London
OPTIONScast iron bollards
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
13
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
BOLLARDS WITH CHAINLINKto reduce public access to specif ic areas, furnitubes are able to f it eye bolts to bollards onto which lengths of chain can be hung. the photo here shows how Gunner bollards with a spiked chain link helped protect landscaped areas from public intrusion at canterbury cathedral.furnitubes range of standard chain, reflective tape and other accessories are shown in detail on page 78.
BOLLARDS AS RAILING POSTSmodern railings can prove unsympathetic in traditional locations. utilising cast iron bollards as barrier posts can often better suit the heritage of the area. furnitubes are able to supply many bollards with holes to accept steel rails. A combination of end, intermediate and corner posts can be used to create a simple, yet effective pedestrian barrier. for more information contact furnitubes’ sales team or for other railing systems see the Railings section.
REPLICA & NEW DESIGNSfurnitubes’ heritage in pattern making and foundry casting using
time honoured methods enable us to manufacture bollards to diverse specif ications. by casting from original or existing bollards, we are able to produce exact replicas so that the
aesthetic value of an area may be kept in balance.
▲ EDINBURGH bollards used as railing postsas shown in Hitchin, Herts
▲ KENNINGTON ST BRIDESinstalled at shoe Lane, London
▲ B
ERES
FOR
D w
ith b
orou
gh c
rest
▲ DORIC SLIMLINEused as a railing post in blackheath Village, London
▲ GUNNERwith eye bolts & spiked chain linksupplied to canterbury cathedral
cast iron bollardsOPTIONS
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
14B
OLL
AR
DS
Security Products are available on video CD-ROM Please contact our sales off ice for your copy
following an epidemic of raids, Dixons approached furnitubes to solve the problem. the result was the dedicated anti ram raid Gunner Security bollard. Attractive and effective, it has become the retailers most popular bollard for protecting store fascias from attack. thousands have been supplied to sites throughout the uK including currys, tesco and Pc World.
these bollards are reinforced with a steel security core and tie bars. this 600mm deep core provides the utmost security for premises, providing impact resistance and foundation anchoring.
In 1989, Dixons, Currys and PC World were being relentlessly attacked by so called ‘ram raiders’. This crime, of deliberately crashing stolen vehicles (usually a sporty saloon car) through town centre shop front windows or the stock room shutters of out-of-town retail units, had reached costly and endemic proportions across the country.
I approached Furnitubes for help in the development of a ‘target hardening’ solution to this crime. A range of demountable anti-ram and fixed security bollards were designed and successfully trialled by Furnitubes, who were then contracted to install the protective bollards nationwide. This urgent ‘roll-out’ programme was achieved with commendable reliability and efficiency, and had the ultimate effect of bringing an end to ‘ram-raids’. The bollards remain an enduring landscape feature in retail parks nationwide, protecting vulnerable shop elevations from this offense.John burr, security, Design & equipment specif ications managerDixons stores Group (1989-1994) ”
“
SECURITY cast iron bollards
Ram raids cost retailers thousands of pounds, not only in stolen goods, but also in damage to their premises and trading disruption. targets range from high street shops to large superstores, including distribution and storage facilities.
▲ GUNNER SECURITY
UNIQUE 600mm DEEP CORE
TIE-BAR FOR CONCRETE ANCHORING
▲ TYPICAL CAST IRON SECURITY BOLLARD CONSTRUCTIONGunneR secuRitY shown here
TIE-BAR FOR CONCRETE ANCHORING
LOOSE PRIMED HEAVY DUTY REINFORCED STEEL CORE
CAST IRON BOLLARD
THE ORIGINAL DIXONS ANTI-RAM RAID BOLLARD
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
15
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
steel removable sockets
As standard, removable bollards are supplied with a socket & hinged cover plate. the bollard has a hasp that passes through the cover plate allowing an fb14 padlock to be used. Padlocks are not supplied.
see page 59 for full details
fi composite sockets
An ‘f1 socket’ is available as an alternative to the standard socket & does not require a padlock.
see page 60 for full details
'centurian'785 a/g600 b/g170 dia g.l. sectionhigh security type bollardwith internal reinforcement of steel bar & 'A-20 Premier Mix'
telescopic bollards
furnitubes offer a range of steel telescopic bollards.these lockable bollards can be lowered into the ground when not in use.Anti Ram Raid versions are also available. see page 66 for full details
REMOVABLE & TELESCOPIC BOLLARDSRemovable bollards, such as the Warminster Medium pictured here, may be produced and supplied with a hinged, flush fitting ground socket for occasional access or for use with fire brigade locks if emergency access is required. it is usual to specify smaller or cast aluminium bollards since they are naturally easier to lift in and out of the socket.Alternatively, furnitubes offer a composite socket that does not require a padlock, plus a full range of telescopic bollards.
other bollards may be used as a visual deterrent or may be reinforced in the same way as the Gunner, with a thick-walled steel inner core, such as a Trafalgar Medium shown here protecting a comet store.
▲ WARMINSTER MEDIUM(removable version)
◄ TRAFALGAR MEDIUM SECURITYshown here at Gallows corner, Romford, essex
burr bloc pg 62 stainless steel pg 51steel security pg 38
other security options
bell pg 29Avector pg 28
600
980
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
16B
OLL
AR
DS
battle
BAT 750cast iron bollard
options:cast Aluminium Removable
see note 1
brighton
BRN 707cast iron bollard
options:cast Aluminium Removable
see note 1
brunel
BRU 523cast iron bollard
options:cast iron Removable
see note 1
350
850
195
sq
62 kg
350
750
150
sq
60 kg
275
885
Ø 100
23 kg
▲ BERESFORDshown in Gidea Park, Lb Havering
bAttLebeLsiZebeResfoRDbRiGHtonbRuneL
fRont eLeVAtion & GRounD LeVeL section 1:25
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Details of ref lective tape, eye-bolts, chain and other standard f ittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
belsize
BEL 506cast iron bollard
options:cast Aluminium Removable
beresford
BER 507cast iron bollard
options:cast Aluminium Removable
see notes 1 & 2see note 1
440
930
150
sq
63 kg
300
1000
Ø 175
52 kg
▲ BATTLEinstalled in china town, soho, London
▲ BRUNELinstalled in Dublin city centre
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
17
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
250
890
Ø 100
18 kg
1:25 fRont eLeVAtion & GRounD LeVeL section
canterbury
CTB 930cast iron bollard
options:cast Aluminium Removable
300
900
Ø 120
41 kg
▲ CANTERBURYwith gold highlightingshown here at melbourne Avenue, chelmsford, essex
cAnteRbuRYcAPitAL
cAPstAncitY
DocKsiDe
see note 1
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
▲ DOCKSIDE
see notes 1 & 2
capital
CAP 100cast iron bollard
options:cast Aluminium Removable
Ø 150
350
1000
105
35 kg
capstan
CAP 520 Scast iron bollard
options:cast iron Removable
see note 1
city
CIT 538cast iron bollard
options:cast Aluminium Removableintegral cast Raised Plinth to accept 201 x 120 sign
440
1065
140
260
99 kg
dockside
DOC 704circular cast iron bollard
options:Half bollardthree Quarter bollard
Ø 370
300
550
56 kg
▲ CITYinstalled in city of Westminster, London
see notes 1 & 2
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 61.
F1 Socketsee details on page 62.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
Details of ref lective tape, eye-bolts, chain and other standard f ittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
1�B
OLL
AR
DS
180 kg
310
1190
Ø 300
310
1190
Ø 300
260
1140
260
1140
Ø 210
cannon
CAN 500cast iron bollard
options:cast Aluminium Removable
cannon service
CAN 500 Ecast iron service bollardwith Hinged slam Lock Door
backboard Dimensions:460mm high110mm wide at top110mm wide at base
cannon major
CAN 500 Mcast iron bollard
cannon major service
CAN 500 MEcast iron service bollardwith Hinged slam Lock Door
backboard Dimensions:680mm high150mm wide at top170mm wide at base
see note 2see note 2see notes 1 & 2
Ø 210
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
see note 2
95 kg 190 kg100kg
Door Aperture Dimensions450mm high125mm wide at top140mm wide at base
Depth for mountings95mm max at top110mm max at base
section
Door Aperture Dimensions:685mm high185mm wide at top210mm wide at base
Depth for mountings:220mm max at top240mm max at base
Ø260
185
210
Ø300
max220
max240section
section
Ø168
160
max145
cAnnon RAnGe
▲ CANNON MAJOR SERVICEinstalled in bexleyheath, Kent
▲ CANNON installed in bexleyheath, Kent
fRont eLeVAtion & GRounD LeVeL section 1:25
Details of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
1�
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
doric slimline
DOR 520 Scast iron bollard
options:cast iron Removable
doric
DOR 520cast iron bollard
options:cast Aluminium RemovableAnti-Ram Raid version
doric extended root
DOR 520 ERcast iron bollard
doric major
DOR 520 Mcast iron bollard
see note 1
doric major service
DOR 520 MEcast iron service bollardwith Hinged slam Lock Door backboard Dimensions:
720mm high130mm wide at top160mm wide at base
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Door Aperture Dimensions700mm high125mm wide at top155mm wide at base
Depth for mountings130mm max at top160mm max at base
150 kg
Ø 300
290
920
290
915
Ø 300Ø 17
5
390
920
Ø 170
250
890
Ø 100
64 kg58 kg21 kg
section
section
155
Ø260
Ø220
125
max130
max160
140 kg
290
920
1:25 fRont eLeVAtion & GRounD LeVeL section
DoRic RAnGe
▼ DORICinstalled in Rotherhithe, London
Details of ref lective tape, eye-bolts, chain and other standard f ittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
see note 1
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
20B
OLL
AR
DS
coRPoRAtioneDinbuRGHennismoReGLobAL
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
corporation slimline
COR 740cast iron bollard
options:cast Aluminium Removable
corporation
COR 741cast iron bollard
options:cast Aluminium Removable
edinburgh
EDN 526cast iron bollard
options:cast Aluminium Removable
see notes 1 & 2
fRont eLeVAtion & GRounD LeVeL section 1:25
ennismore
ENN 567cast iron bollard
options:cast Aluminium Removable
see note 1 see note 1 see note 1
▼ EDINBURGHinstalled in Hitchin town centre, Herts
915
300
Ø 130
35 kg
300
950
135
sq
45 kg85 kg
230
815
Ø 150
310
1060
Ø 230
35 kg
global
GLB 400cast iron bollard
150
Ø 4
00Ø 20
0
45 kg
Details of ref lective tape, eye-bolts, chain and other standard f ittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
21
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
gunner
GUN 503cast iron bollard
options:cast Aluminium Removable
gunner security
GUN 503 SCcast iron Anti-Ram Raid bollardReinforced with steel securitycore and tie barsPrimer finish
gunner major
GUN 100cast iron bollard
options:cast Aluminium Removable
gunner major security
GUN 100 SCcast iron Anti-Ram Raid bollardReinforced with steel securitycore and tie barsPrimer finish
Ø 165
Ø 165
300
750
600
750
36 kg 49 kg
Ø 175
325
1000
55 kg
Ø 175
69 kg
▲ GUNNERinstalled at Gallagher Retail Park, Wednesbury
GAinsboRouGH GunneR
1:25 fRont eLeVAtion & GRounD LeVeL section
see note 1 see note 3 see notes 1 & 2 see notes 2 & 3
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
1000
600
Ø 190
300
1100
gainsborough
GSB 511cast iron bollard
options:cast Aluminium Removable
see notes 1 & 2
1100
300
190 dia
55 kg
Details of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 3
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
22B
OLL
AR
DS
fRont eLeVAtion & GRounD LeVeL section 1:25
jermyn
JER 115cast iron bollard with octagonal dome cap
options:Domed (spherical cap)
see note 2
▲ MANCHESTER ROUND BASEinstalled at the chimes, uxbridge
LAmbetHHAmmeRsmitHJeRmYnmAncHesteR
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
250
1150
350
sq
172 kg
hammersmith
HAM 500cast iron bollard
options:cast Aluminium Removable
see notes 1 & 2
300
1000
130
sq
60 kg
manchester round base
MAN 536 RBcircular cast iron bollardwith circular base
options:cast Aluminium RemovableAnti-Ram Raid
manchester sq base
MAN 536 SBcircular cast iron bollard with square base
options:cast Aluminium RemovableAnti-Ram Raid
see note 1 see note 1
310
975
225
sq
60 kg
300
975
52 kg
Ø 190
37 kg
110
7010
0030
0
lambeth
LAM 510cast Ductile iron bollard
options:cast Aluminium Removable
see notes 1, 2 & 3
Details of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
▲ LAMBETHas supplied to the forge, Harbinger Road, London
Lambeth Rangeother products are available in the Lambeth Range. see page 6 for more information
Note 3
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
23
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
sherratt
SHE 502cast iron bollard
options:cast Aluminium Removable
see note 1
300
900
180
130
70 kg
▼ NEW KENNINGTONinstalled in Kennington, London
neW KenninGtonPALAce
ReGents Pie cRustsPinneR
sHeRRAtt
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
regent pie-crust mk.2
REG 524cast iron bollard
options:cast Aluminium Removable
see note 1
300
955
Ø 180
60 kg
1:25 fRont eLeVAtion & GRounD LeVeL section
new kennington
KEN 525cast iron bollard
250
1200
300
200
1200
300
250
125 kg
palace
PAL 150cast iron bollard
options:cast Aluminium Removable
see note 1
300
900
see notes 1 & 2
spinner
SPN 656cast iron bollard
options:cast Aluminium Removable
Ø 160
300
1000
45 kg70 kg
▼ SHERRATTas supplied to mayors town Hall, London
150
sq
Details of ref lective tape, eye-bolts, chain and other standard f ittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
see note 2
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
24B
OLL
AR
DS
telford
TEL 550cast iron bollard
options:cast Aluminium Removable
see notes 1 & 2
Ø 180
300
1015
65 kg
trafalgar medium
TRA 631cast iron bollard
options:cast Aluminium Removable
trafalgar large
TRA 632cast iron bollard
options:cast Aluminium Removable
trafalgar medium security
TRA 631 SCcast iron Anti-Ram Raid bollardReinforced with steel securitycore and tie bars Primer finish
155
sq98
030
0
46 kg
155
sq60
098
0
59 kg
▲ TRAFALGAR MEDIUMinstalled in Greenwich, London
▲ SOUTHWARKshown in isleworth, middlesex
soutHWARKteLfoRDtRAfALGAR
see note 1 see notes 1 & 2 see note 3
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
295
1000
205
sq
88 kg
southwark
SOU 130cast iron bollard
options:cast Aluminium Removableintegral cast raised Plinth to accept 210 x 120mm sign.
see note 1
300
900
Ø 200
46 kg
fRont eLeVAtion & GRounD LeVeL section 1:25
Details of ref lective tape, eye-bolts, chain and other standard f ittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 3
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard f inish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60 .
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
25
Cas
t Iro
n &
Alu
min
ium
Bol
lard
s
1:25 fRont eLeVAtion & GRounD LeVeL section
warminster sq base
WAR 511 SBcircular cast iron bollard with square base
options:cast Aluminium RemovableAnti-Ram Raid
warminster round base
WAR 511 RBcircular cast iron bollardwith circular base
options:cast Aluminium Removable Anti-Ram Raid
warminster medium
WAR 811cast iron bollard
options:cast Aluminium Removable
see note 1see notes 1 & 2 see notes 1 & 2
warminster medium security
WAR 811 SCcast iron Anti-Ram Raid bollardReinforced with steel securitycore and tie barsPrimer finish
350
1220
Ø 170
350
1220
170
sq
300
800
Ø 145
800
Ø 145
600
▼ WARMINSTER MEDIUMinstalled in thornbury square, London
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
ViceRoYWARminsteR
63 kg 65 kg 39 kg 52 kg
see note 3
viceroy
VIC 521cast iron bollard
options:cast Aluminium Removable
170
sq30
079
0
40 kg
see note 1
Details of ref lective tape, eye-bolts, chain and other standard f ittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59 - 61.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 3
TECHNICAL
Materialfurnitubes cast iron and aluminium bollards are 100% recyclable.
Finishstandard f inish is primer. We recommend that top coats are applied on site after installation.
Removable Bollards two types of socket are available for removable bollards:
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 1
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
26B
OLL
AR
DS
POWERbollards
timbeRbAcKboARD
coRRosion ResistAnt HinGes
instALLeDseRVice units(not supplied)
LocK
Access HoLe to ALLoW cAbLes to PAss tHRouGH LocKeD DooR
cAst iRonmAin boDY
CAN 500 MECANNON SERVICE(electrical version) shown closed & open
the timber backboard provides an ideal mounting point for service units and the lockable hinged door prohibits vandalism and unauthorised use. the door of the bollards can be fully closed even while the units are in use ensuring complete protection. An earthing bolt is also supplied - see pages 18-19 for technical details.
Popular with market traders, the power service bollards have also been installed in recreational ground, parks and camping sites.
furnitubes popular Doric and cannon bollards are available as power service bollards. these bollards are designed to house electricity or water supply points, allowing an easily accessible source of power.
■ durable: cast iron main body provides strength and protection
■ slam lock door prohibits unauthorised use
■ timber backboard is ideal for mounting service units
■ corrosion resistant hinges
■ available for water or electrical service
■ access hole at the base of the door to allow cables to pass through
the cannon service (shown left) is the same size as a regular cannon bollard. the Doric and cannon major service (shown centre and right) contains a larger mounting space. the cannon major service bollard (shown right) has been supplied with a special crest for Gibraltar.
the Doric major service bollard has been supplied to many locations through the uK, including bedford High street, margate, st Albans, Herts (left images) and London (shown right). the centre right image shows an electrical version of the Doric major service, and the far right images shows a water version.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
Ent
er s
peci
fic to
pic
here
TRAFFICbollards
Furnitubes range of traffic bollards are designed to deflect the wheels of vehicles to prevent them mounting kerbs and to restrict access.
The contemporary Avector traffic bollard is ideal for modern areas, and the traditional bell bollard is available in a variety of styles and options.
▼ B
ELL
138
hous
ing
a c
itY
bol
lard
, ins
talle
d at
car
lton
stre
et, L
ondo
n
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
2�B
OLL
AR
DS
conventional bollards are often overturned or damaged by vehicles that drift onto the pavement, especially on the corner of roads.
the Avector bollard is designed to enable the deflection of a vehicle’s wheels. its sleek modern form is designed for contemporary locations. for sites which require a more traditional design our bell bollard range is ideal.
■ PEDESTRIAN SAFETY
■ PROTECTION OF PROPERTY
■ WIDTH RESTRICTOR
■ PROTECTION OF ROAD SIGNS & STREET FURNITURE
the Avector bollard is the latest addition to furnitubes range of traffic control bollards.
fRont eLeVAtion & GRounD LeVeL section 1:25
avector
AVE 100cast iron bollard
Ø575
495
200
270
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract..
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Name IdentificationWe are proud of our products and they will therefore be identifiable with our name.
TECHNICAL
Materialfurnitubes cast iron Avector bollard is 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
▲ AVECTOR
AVECTORbollard
▲ The Avector Bollard deflects the wheels of a vehicle, protecting the pavement, pedestrians and property
90 kg
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
2�
Bel
l Bol
lard
modern, heavy-duty commercial vehicles can carry large and heavy payloads, often weighing up to 38 tonnes. these huge beasts may be efficient and profitable to their owners, but to pedestrians, roadside structures, and street furniture they can present a constant source of damage and danger. Less obvious structures like overhanging or historic buildings are also at risk and in need of protection.
■ PEDESTRIAN SAFETY■ PROTECTION OF PROPERTY■ WIDTH RESTRICTOR■ TRAFFIC CALMING MEASURES
■ PRACTICAL & COST EFFECTIVE
until now, the only answer has been to place conventional bollards close to the areas that need protection, but these are often easily overturned, causing damage to the vehicle involved, pavement, bollard and resulting in an even greater hazard to the pedestrian, as shown.
unnecessary damage means costly repairs and does nothing to enhance the appearance of our environment that we’re now trying so hard to improve and preserve.
THE SOLUTIONthe revolutionary Bell 100 Bollard, manufactured by furnitubes, is a simple yet effective solution. following an extensive study of lorry wheels and undercarriages, a design was created to enable the deflection of a vehicle’s wheels, whilst itself remaining firmly in place and undamaged. the bollard’s profile is designed to encourage a vehicle’s tyres initially to mount its lower curve. by increasing the slope-angle of the bollard above this point, any attempt by the vehicle to rise further is prevented by deflecting the tyre sharply away.
the video footage above shows the bell in action.
BELL®
bollards
▲ BELL 100installed in Hitchin town centre, Herts
The Bell Bollard is
available on video
CD-ROM
Please contact our sales
office for your copy
◄▲ Damage to bollards & buildings
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
30B
OLL
AR
DS
Bell BollardsAll rights reserved. bell shaped traffic bollards in this or other forms, with or without surface decoration are copyright Protected (filed in accordance with universal copyright convention in London) & may not be reproduced without the prior permission of furnitubes international Limited or the original copyright holder.Registered at stationers’ Hall, London.no b9/1082/36020
Copyright © 1986 Paul M. HarrisInnovation and New Product Design.
bell
BELL 100 cast iron bollard
bell 3/4
BELL 340cast iron bollard
bell 1/2
BELL 120cast iron bollard
Ø 600
600
360
240
240 360
300
475
450
475
450
475
450
175 kg 150 kg 115 kg
fRont eLeVAtion & GRounD LeVeL section 1:25
500
steering Gear under bumper
Air Dam
bumper
▲ BELL 100 Bollard will deflect the largest lorries
TECHNICAL
Materialfurnitubes cast iron and aluminium bell bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Furnitubes IdentificationWe are proud of our products and they will therefore be identifiable with our name.
beLL® boLLARD
▲ BELL 100installed as width restrictors supplied to the London borough of Wandsworth
bell bollards can provide a stable vehicular barrier, as even high axled lorries would not be able to drive over an obstruction of this height, without causing irreparable damage to its drive train and steering mechanisms
Positioned and aligned at appropriate distances across the road, bell bollards can also act as effective width restrictors, preventing oversize vehicles from passing through.
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract..
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
31
Bel
l Bol
lard
VARIATIONSfor protection to corners of buildings and exposed brickwork the Bell 340 is an ideal solution. the shape is the same as a standard bell, but with a segment removed, to allow for easy installation without having to disturb the fabric of the corner.
Decorative use of the bell can be made using the Bell 500 version. it is the same size as the standard bollard, but instead of the deep root, there are four shallow flanges. With proper foundations it is ideal for use on bridges and areas where it is not possible to install the bell 100.
▼ BELL 3403/4 bell bollard
◄ BELL 1201/2 bell bollard
▲ BELL 500used at the Royal festival Hall on London’s south bank as movable traffic control bollards
BELL 500 X ►
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract..
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
beLL® boLLARD
bell decorative
BELL 500cast iron bollard
bell x
BELL 500Xcast iron bollard withsteel subframe
Ø 600
475
450
Ø 600
bell x internal assembly
All items shown are suppliedloose for on-site assembly.
see note 1
1:25 fRont eLeVAtion & GRounD LeVeL section
155 kg115 kg
475
70
furnitubes’ new Bell 500 X has a unique steel subframe that performs as well as the bell 100 in situations where underground services make installation difficult, whilst also being easier to transport and handle.
Installationthe bell X is particularly suitable for sites where underground services might impede installation of the standard bell 100.
note 1
TECHNICAL
Materialfurnitubes cast iron and aluminium bell bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Furnitubes IdentificationWe are proud of our products and they will therefore be identifiable with our name.
Bell BollardsAll rights reserved. bell shaped traffic bollards in this or other forms, with or without surface decoration are copyright Protected (filed in accordance with universal copyright convention in London) & may not be reproduced without the prior permission of furnitubes international Limited or the original copyright holder.Registered at stationers’ Hall, London.no b9/1082/36020
Copyright © 1986 Paul M. HarrisInnovation and New Product Design.
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
32B
OLL
AR
DS
fRont eLeVAtion & GRounD LeVeL section 1:25
BELL 138cast iron bollardDesigned to House a citY 538 bollard (supplied separately - see page 17)
1065
475
Ø500
1065
450
475
450
475
450
the ability of the bell 115 to act as a pedestrian barrier is further enhanced by incorporating the bell bollard into the Linx 100 railing system. by combining the two products it is possible to design an integrated, cost effective vehicular and pedestrian barrier, with the bell bollard protecting any corner post from damage by passing vehicles.
BELL 115the Bell 115 has been designed to allow the installation of a bell bollard and a 115mm diameter post or bollard within the same footings.the combination will deflect vehicles and protect structures from damage, whilst also acting as a high visibility post.
bell
BELL 115cast iron bollardshown installed with Zen701hi-visibility stainless steel bollard(supplied separately - see pages 50 - 53)
BELL 115cast iron bollardshown installed withLinX railing system(supplied separately - see Railings section)
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract..
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Materialfurnitubes cast iron and aluminium bell bollards are 100% recyclable.
Finishstandard finish is primer. We recommend that top coats are applied on site after installation.
Disability Consciousbollards over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
175 kg
▲ Hi-visibility ZEN 701 & BELL 115 shown here on Kensington High street
▲ BELL 115 & LINX RAILING
BELL 138furnitubes new Bell 138 is a variation of the popular bell bollard range. the bell 138 variation has a recess designed specifically to house a CIT 538 City Bollard. in addition to providing improved visibility, it also enables the bell to blend seamlessly within locations where city bollards are used.
When the BELL 115 is installed with a bollard or post of 1000mm height or greater, the bell bollard will conform to disability discrimination guidelines for partially sighted pedestrians.
1180
new additionsBell Bollard®
▲ BELL 138 housing the CITY bollard tyre marks prove that they are used
▲ special Aluminium BELL 115 in High street Kensington, London (signpost by others)
Variable
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
33
Bel
l Bol
lard
▲ typical installation of the beLL 115 and LinX 100 railing system
TYPICAL INSTALLATIONSthe diagrams below show how bell bollards can be installed along a kerb to prevent a vehicle from mounting the pavement.
bell bollards can also act as effective width restrictors when positioned at appropriate distances across the road, thus preventing oversize vehicles from passing through.
INTERNATIONAL APPEALsince its introduction over twenty years ago, the furnitubes bell bollard has been installed in many locations all over the world, making it furnitubes’ most famous international product!
▲ macau city centre ▲ singapore Anderson bridge ▲ new York city centre
▲ typical installation to prevent a vehicle mounting the pavement
▲ BELL 100 installed as a width restrictor
INSTALLATIONcare should be taken when preparing the foundations for the bell bollard. Diagrams (A) and (b) show the recommended minimum foundation size. in cases of doubt, a professional engineers’ advice should be sought.
to ensure the bell bollard works effectively it should always be set so that the height above ground level remains the same regardless of the type of base. if the bell bollard is set on sloping ground the height above ground level should be determined from its centerline, not edge.
50
mm
ma
x
prot
rusio
n
abov
e G
.L.
G.L.
bell Loop
600m
m
Diagram A
475m
m45
0mm
Kerb Line
800mm
Parallel to kerb 80
0mm
concrete mix to 25 newtons
Diagram b
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
34B
OLL
AR
DS
▲ L
AM
BET
H t
raffi
c bo
llard
LAMBETH® LUTONtraffic bollards
LAM 632 BST - Lambeth Seat DDA with timber slats LAM 632 BP - Lambeth Seat DDA with recycled plastic slats
LAM 623 BST - Lambeth Seat Classic with timber slats LAM 623 BP - Lambeth Seat Classic with recycled plastic slats
the Lambeth traffic bollard is made from 100% recyclable s.G iron, and is supplied painted black. it is part of the Lambeth range, that consists of streetscape elements manufactures in tough s.G (Ductile) iron for longevity and vandal resistance.
345 50
lambeth traffic bollard
LAM 300cast Ductile iron bollardWet spray blackDft traffic sign
the Lambeth® traff ic bollard is available with any Ø300mm Dft traff ic sign, which is held on mechanically without any visible f ixings.
300
825
fRont eLeVAtion & GRounD LeVeL section 1:25
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.
TECHNICAL
Materialfurnitubes cast Ductile iron is 100% recyclable.
the Luton traffic bollard contains recyclable parts.
manufactured in tough medium density polyethylene, the reflective Luton traffic bollard rebounds on impact.
the reflective ‘keep left’ panels are rebated into the faces of the bollards, offering added protection from vehicular impact.
Approved by Dft, the Luton traffic bollard can be used in conjunction with the f1 50 socket to provide a flexible traffic solution, allowing completion on a site before the installation of the bollard. see page 135 for more details on the f1 50 socket.
390mm
390mm
125mm
1090mm
390
125
luton traffic bollard
LUT 300medium Density Polyethylene Diamond Grade Reflective PanelsDft traffic signto be used in conjunction with f1 50 socket (not included, see page 135)
160
930
&
175
8533
5
F1 50composite Removable socketwith steel Lid.to accept 50 mm square
5.5 kg
Anti-tWist DesiGn & QuicK RecoVeRY
f1 50 socKet foR eAsY RePLAcement
3m DiAmonD GRADe RefLectiVe PAneLs
RebAteD PAneLs foR ADDeD PRotection
meDium DensitY PoLYetHYLene -
fuLLY RecYcLAbLe
comPosite RemoVAbLe socKet
WitH steeL LiD
one mouLDeD constRuction
Luton Traffic Bollardthe Luton traffic bollard is also available in black.
LAM 632 BST - Lambeth Seat DDA with timber slats LAM 632 BP - Lambeth Seat DDA with recycled plastic slats
LAM 623 BST - Lambeth Seat Classic with timber slats LAM 623 BP - Lambeth Seat Classic with recycled plastic slats
LAM 632 BST - Lambeth Seat DDA with timber slats LAM 632 BP - Lambeth Seat DDA with recycled plastic slats
LAM 623 BST - Lambeth Seat Classic with timber slats LAM 623 BP - Lambeth Seat Classic with recycled plastic slats
LAM 632 BST - Lambeth Seat DDA with timber slats LAM 632 BP - Lambeth Seat DDA with recycled plastic slats
LAM 623 BST - Lambeth Seat Classic with timber slats LAM 623 BP - Lambeth Seat Classic with recycled plastic slats
LAM 632 BST - Lambeth Seat DDA with timber slats LAM 632 BP - Lambeth Seat DDA with recycled plastic slats
LAM 623 BST - Lambeth Seat Classic with timber slats LAM 623 BP - Lambeth Seat Classic with recycled plastic slats
LAM 632 BST - Lambeth Seat DDA with timber slats LAM 632 BP - Lambeth Seat DDA with recycled plastic slats
LAM 623 BST - Lambeth Seat Classic with timber slats LAM 623 BP - Lambeth Seat Classic with recycled plastic slats
LAM 632 BST - Lambeth Seat DDA with timber slats LAM 632 BP - Lambeth Seat DDA with recycled plastic slats
LAM 623 BST - Lambeth Seat Classic with timber slats LAM 623 BP - Lambeth Seat Classic with recycled plastic slats
RAnGe
bollards pg 22
seatingpg 170
cycle parking pg 100
litter pg 216
®
7 kg28 kg
▲ L
UTO
N t
raffi
c bo
llard
with
f1
50 s
ocke
t
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
35
Traf
fic B
olla
rds
DST 450 ILLUMINATED DST 300 ILLUMINATED
300
300
315
1065
300
990
300
315
DST 450
DST 300
GROUNDLEVEL
300
1065
GROUNDLEVEL
GROUNDLEVEL
300
990
DISTRICTtraffic bollard
district traffic bollard
DST 300Root fixed traffic bollardstainless steel, satin Polished frame300mm Diameter sign
options:bolt Downstainless steel bright PolishedGalvanised steel framePlastic coated frameenhanced Powder coated frame
led uplighter
LED 1506W LeD Light
install 350mm in front of the traffic bollard for Dst 300
install 300mm in front of the traffic bollard for Dst 450
see page 291 for more detailsand further options
DST 450Root fixed traffic bollardstainless steel, satin Polished frame450mm Diameter sign
options:bolt Downstainless steel bright PolishedGalvanised steel framePlastic coated frameenhanced Powder coated frame
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.
TECHNICAL
Materialfurnitubes steel and stainless steel are 100% recyclable.
Finishesthe District traffic bollard is available in the following finishes:■ Enhanced Powder Coat■ Plastic Coat A wide range of bs/RAL colours are available.for further information on paint finishes refer to pages 337-339.
Signs Availablethe following Dft signs are available with the District traffic bollard:■ Keep Left■ Keep Right■ straight Ahead■ both sides ■ no entry■ Plain (White or blue)
300
990
DST 450 ILLUMINATED DST 300 ILLUMINATED
300
300
315
1065
300
990
300
315
DST 450
DST 300
GROUNDLEVEL
300
1065
GROUNDLEVEL
GROUNDLEVEL
300
990
300
1065
440575
315
150
300
the new District traffic bollard brings a minimalist aesthetic to highways. it is available in a variety of materials and finishes, including plastic coated, satin polished stainless steel and galvanised steel. the Dft signs are class 2 reflective and can be specified with anti-graffiti coatings. District traffic bollards are available in two sizes, with 450mm or 300mm signs, for either bolting-down or root fixing.
▲ DISTRICTgalvanised steel finishas supplied to Richmond, surrey
▲ DISTRICT with uplighterplastic coated blackinstalled in stockwell, London
ILLUMINATED DISTRICT BOLLARDthe District can be supplied with an uplighter to illuminate the bollard in the dark.
FINISH OPTIONS
Galvanised steel
stainless steel
Plastic & enhanced Powder coated steel
■ 6.no powerful 1W white Luxion LeD’s
■ iP67 rated for mains connection
■ stainless steel bezel
■ reinforced glass lens
■ die cast aluminium body
■ cool to touch
parking pg 101 tree guards pg 186seating pg 186
DISTRICTRAnGe
DST 450 ILLUMINATED DST 300 ILLUMINATED
300
300
315
1065
300
990
300
315
DST 450
DST 300
GROUNDLEVEL
300
1065
GROUNDLEVEL
GROUNDLEVEL
300
990
15 kg 20 kg
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
36▼
KEN
TON
Dou
ble
Nec
k Se
curi
ty fi
tted
with
yel
low
refl
ectiv
e ta
pe, a
s su
pplie
d to
met
ro R
etai
l Par
k, G
ates
head
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
37
Ste
el B
olla
rds
All of the steel and composite bollards are available in a variety of diameters, lengths and finishes. many can be specified with alternative embellishment options. furnitubes recommend these bollards are painted on site in order to minimise damage during installation, fully painted and highlighted bollards are available upon request.
Virtually all bollards from the steel and composite range are available as removable versions for use where emergency access is required. steel security bollards are also available, see overleaf.
steel is exceptionally strong and will not fracture on impact, making it ideal for use in the production of traff ic bollards.
STEEL bollards
▲ KENTON 113 Single Neck
▲ SUDBURY 422 Double Ringinstalled at canvey island, essex
▲ SAILSBURY MK.2installed at st saviours and st Peters church, eastbourne, sussex
OPTIONS
Reflective tapePainting & highlighting
embellishments can be added to steel bollards check technical details to see what applies to each bollard
base plating Removable versions
▲ KENTON 112 Single Neckgalvanised finishas supplied to outlands Drive, Weybridge, surrey
▲ SAILSBURY MAJOR MK.2shown here in Greenwich market, London
Removable versions
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
3�B
OLL
AR
DS
STEEL SECURITY BOLLARDSmany of furnitubes fixed steel bollards are also available as ‘anti ram raid’ bollards. these thick-walled versions are set 600mm below ground to provide the ultimate in protection against would-be raiders. the modern-looking Stirling, Kenton and Harrow ranges are embellished with a smoothly domed top to prevent rainwater accumulation and a variety of ring and groove configurations. often, these are used in conjunction with the Burr Bloc (see page 62) to provide a ‘security corral’ at the rear of stores.
because of their size and weight, it is best to paint the final top-coat to security bollards after installation to prevent damage during transit or handling. they can be further enhanced by highlighting specific features in a contrasting colour. for applications that require higher visibility, furnitubes are able to supply or fit reflective tape in either red, white or yellow. see page 78 for further details.
Security Products are available on video CD-ROM Please contact our sales office for your copy
STEEL SECURITYbollards
▲ HARROW Single Neck Removable
▲ KENTON Single Neck Securityhighlighted with reflective tapesupplied to tesco, epping
▲ HARROW Double Ring Security
▲ STIRLING Security ▲ HOLBORN MAJOR MK.2 Security
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
3�
Ste
el B
olla
rds
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
6alperton range - single neck
ALP 311 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
ALP 312 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
ALP 313 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
120
sq
120
sq
150
sq
150
sq
200
sq
23 kg 30 kg 47 kg
1:25 fRont eLeVAtion & GRounD LeVeL section
36 kg 45 kg
ALP 311 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
ALP 312 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
see notes 1 & 3see notes 1 & 3see notes 1 & 3 see notes 2 & 3
alperton range – double neck
ALP 321 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
ALP 322 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
ALP 323 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
120
sq
120
sq
150
sq
150
sq
200
sq
24 kg 31 kg37 kg
ALP 321 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
ALP 322 SCsteel bollard, Heavy DutyAnti-Ram Raid Version 900mm height
options:1000mm height for DDA regulation
see notes 1 & 3see notes 1 & 3see notes 1 & 3
Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. for details see page 59.
Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.
Note 1
FinishGalvanised finish only.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 2
TECHNICAL
Materialfurnitubes steel bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 3
see notes 2 & 3
ALPeRton RAnGe
48 kg46 kgNote 3
see notes 2 & 3 see notes 2 & 3
Add suffix DDA for bollards over 1000mm, ie: ALP 323 DDA
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
40B
OLL
AR
DS
fRont eLeVAtion & GRounD LeVeL section 1:25
▲ HARROW Single Ring Baseplatedshown here in north Lane, Aldershot, Hampshire
harrow range – single ring
HAR 211 steel bollard900mm height
options:steel Removablebase Plated 1000mm height for DDA regulations
HAR 212 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
HAR 213 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
HAR 213 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
HAR 214 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
see notes 1 & 4see notes 1 & 4see notes 1 & 4see notes 1, 2 & 4
350
900
or 1
000
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
Ø 140
Ø 170
Ø 170
Ø 195
see notes 3 & 4
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
12 kg 23 kg 28 kg 66 kg 35 kg
350
900
or 1
000
HARRoW RAnGe
Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. for details see page 59.
Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.
FinishGalvanised finish only.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 3
TECHNICAL
Materialfurnitubes steel bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept Ø115 bollards. see page 60.
Note 2
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 4
Note 1
Add suffix DDA for bollards over 1000mm, ie: HAR 211 DDA
Ø 115
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
41
Ste
el B
olla
rds
harrow range – double ring
HAR 221 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
HAR 222 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
HAR 223 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
HAR 223 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
HAR 224 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulations
see notes 1, 2 & 4
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
Ø 140
Ø 170
Ø 170
Ø 195
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
see notes 1 & 4 see notes 1 & 4 see notes 1 & 4
36 kg67 kg28 kg23 kg13 kg
350
900
or 1
000
▼ HARROW Double Ringshown here in Great Dunmow, essex
HARRoW RAnGe
1:25 fRont eLeVAtion & GRounD LeVeL section
Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. for details see page 59.
Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.
FinishGalvanised finish only.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 3
TECHNICAL
Materialfurnitubes steel bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept Ø115 bollards. see page 60.
Note 2
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 4
Note 1
see notes 3 & 4
Add suffix DDA for bollards over 1000mm, ie: HAR 224 DDA
Ø 115
900
or 1
000
350
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
42B
OLL
AR
DS
Kenton RAnGe
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
kenton range – single neck
KEN 111 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
KEN 112 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
KEN 113 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
KEN 113 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
KEN 114 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
350
900
or 1
000
350
900
or 1
000
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
Ø 115
Ø 140
Ø 170
Ø 170
Ø 195
see notes 1 & 4see notes 1 & 4see notes 1 & 4see notes 1, 2 & 4
19 kg 20 kg 29 kg 60 kg 35 kg
▼ KENTON Single Neckgalvanised finishas supplied to colbayns High school, clacton, essex
fRont eLeVAtion & GRounD LeVeL section 1:25
Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. for details see page 59.
Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.
FinishGalvanised finish only.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 3
TECHNICAL
Materialfurnitubes steel bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept Ø115 bollards. see page 60.
Note 2
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 4
Note 1
see notes 3 & 4
Add suffix DDA for bollards over 1000mm, ie: KEN 111 DDA
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
43
Ste
el B
olla
rds
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
kenton range – double neck
KEN 121 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
KEN 122 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
KEN 123 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
KEN 123 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
KEN 124 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
350
900
or 1
000
350
900
or 1
000
350
900
or 1
000
600
900
350
Ø 115
Ø 140
Ø 170
Ø 170
Ø 195
see notes 1, 2 & 4 see notes 1 & 4 see notes 1 & 4 see notes 1 & 4
36 kg60 kg29 kg21 kg19 kg
Kenton RAnGe
▲ KENTON Double Neck Securityshown here at metro Retail Park, Gateshead
1:25 fRont eLeVAtion & GRounD LeVeL section
Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. for details see page 59.
Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.
FinishGalvanised finish only.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 3
TECHNICAL
Materialfurnitubes steel bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept Ø115 bollards. see page 60.
Note 2
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 4
Note 1
900
or 1
000
900
or 1
000
see notes 3 & 4
Add suffix DDA for bollards over 1000mm, ie: KEN 124 DDA
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
44B
OLL
AR
DS
600
800
stirling security
STL 102 SCGalvanised steel bollardAnti-Ram Raid Version
options:nylon Plastic coated inblack or Grey. other colours available upon request.
see note 2
20 kg
Ø 102
edgware mk2
EDG 901 steel bollard900mm height
options:base Platedsteel Removable1000mm height for DDA regulation
500
900
or 1
000
Ø 140
see notes 1 & 3
24 kg
sudbury range – single ring
SUD 411 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
SUD 412 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
sudbury – double ring
SUD 421 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
350
900
or 1
000
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
120
sq 150
sq
150
sq
200
sq
SUD 412 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
SUD 413 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
see notes 1 & 3see notes 1 & 3see notes 1 & 3see notes 1 & 3
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
fRont eLeVAtion & GRounD LeVeL section 1:25
SUD 422 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height
options:1000mm height for DDA regulation
45 kg30 kg 50 kg
sudbury – double ring
SUD 422 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
SUD 423 steel bollard900mm height
options:steel Removablebase Plated1000mm height for DDA regulation
see notes 1 & 3see notes 1 & 3
Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. the bollard has a fixed spigot that passes through the hinged cover plate and allows an fb14 padlock (not supplied) to secure the bollard in the socket. see page 59.
Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.
Note 1
FinishGalvanised finish only.
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Note 2
TECHNICAL
Materialfurnitubes steel bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 3
900
or 1
000
350
120
sq
350
900
or 1
000
600
900
or 1
000
350
900
or 1
000
150
sq
150
sq
200
sq
suDbuRY RAnGeeDGWARe secuRitY stiRLinG secuRitY
24 kg 44 kg 25 kg29 kg 49 kg
see notes 2 & 3
see notes 2 & 3
Add suffix DDA for bollards over 1000mm, ie:SUD 422 DDA
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
45
Iron
& S
teel
Bol
lard
s
'centurian'785 a/g600 b/g170 dia g.l. sectionhigh security type bollardwith internal reinforcement of steel bar & 'A-20 Premier Mix'
holborn security
HOL 510 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish
holborn major security
HOL 520 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish
Ø 170
600
1000
salisbury security
SAL 530 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish
salisbury major security
SAL 540 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish
Ø 170Ø 115
telescopic bollards
furnitubes offer a range of steel telescopic bollards. these lockable bollards can be lowered into the ground when not in use.Anti Ram Raid versions are also available
see Access control section on pages 57 - 67.
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Note 2
Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.
Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Note 1
Note 4
Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
Note 5
see notes 4 & 5
600
1000
600
1000
600
1000
Ø 115
51 kg24 kg45 kg30kg
1:25 fRont eLeVAtion & GRounD LeVeL section
Removable Bollards two types of socket are available to enable bollards to be converted to make them removable.
Steel Socketsee details on page 59.
F1 Socketsee details on page 60.
Note 3
holborn mk.2
HOL 510 steel main body and Root with cast iron caps and Rings
options:Removablebase Platedstainless steel - see page 55
holborn major mk.2
HOL 520 steel main body and Root with cast iron caps and Rings
options:Removablebase Platedstainless steel - see page 55
Ø 170
285
1000
salisbury mk.2
SAL 530 steel main body and Root with cast iron caps and Rings
options:Removablestainless steel - see page 55
salisbury major mk.2
SAL 540 steel main body and Root with cast iron caps and Rings
options:Removablestainless steel - see page 55
Ø 170Ø 115
see notes 1, 3 & 5 see notes 1, 3 & 5see notes 1, 2, 3 & 5 see notes 1, 2, 3 & 5
320
1000
305
1000
340
1000
Ø 115
46 kg19 kg40 kg23 kg
see notes 4 & 5 see notes 4 & 5 see notes 4 & 5
TECHNICAL
Materialfurnitubes steel and composite bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
HoLboRn RAnGe sALisbuRY RAnGe
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
46▼
LIN
X 1
00 K
NIG
HT
SBR
IDG
E w
ith F
1 R
emov
able
Soc
ket
inst
alle
d in
bro
ckle
y, L
ondo
n
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
47
Linx
Com
posi
te B
olla
rds
the innovative LinxTM bollard range is devised to work with furnitubes’ patented LinxTM railing system.
linx TM
▲ LINX 100 TRAFFORDbright polished stainless steelinstalled in braintree market square, essex
▲ LINX 100 EUSTONwith Euston base collar and white reflective tapesupplied to High street, Kippax, Leeds
▲ LINX 100 EUSTON with painted euston cap and base collaralongside Linx 300 railing system (see Railings section)installed at Ashvale canal bridge, Aldershot
► LINX 100 ASHTONwith trafford base collar
▼ LINX 100 SPECIALwith Kenton satin polished stainless steel cap
composite bollards
these steel and cast iron bollards work on a mix and match principle - they are available in four different sizes and there is a choice of six tops and two base collars. this variety of options ensures that the bollards can be tailored to achieve an individual look that reflects the uniqueness of any area.
▲ LINX 400 KENTONglass bead blast stainless steel post with satin polished stainless steel capsinstalled in Lb Hammersmith
railings pg 114parking pg 98
RAnGe
litter & waste pg 253
™
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
4�B
OLL
AR
DS trafford
LTB 200steel & cast iron bollard
options:Removablestainless steel & cast iron
See Note 1
375
1220
Ø 75
See Note 1
865
300
300
805
linx 200 range
euston
LEB 200steel & cast iron bollard
options:Removablestainless steel & cast iron
300
815
815
300
865
300
Ø 115
Ø 145
375
1160
Ø 75Ø 75 Ø 75 Ø 75 Ø 75 Ø 75
knightsbridge
LKM 200steel & cast iron bollard
options:Removablestainless steel & cast iron
ashton
LAM 200steel & cast iron bollard
options:Removablestainless steel & cast iron
hale
LHM 200steel & cast iron bollard
options:Removablestainless steel & cast iron
trafford
LTM 200steel & cast iron bollard
options:Removablestainless steel & cast iron
euston
EB 200cast iron base collar
option:cast iron
trafford
TB 200cast iron base collar
option:cast iron
linx 200 midi range
euston
LEM 200steel & cast iron bollard
options:Removablestainless steel & cast iron
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Materialfurnitubes steel and composite bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
Steel & Cast Ironstandard finish is galvanised post with primer finished cap and base collar. We recommend that top coats are applied on site after installation.
Stainless Steeloptionally the post can be supplied in bright polished stainless steel with a cast cap and base collar in either cast iron or polished cast bronze.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. the bollard has a fixed spigot that passes through the hinged cover plate allowing an fb14 padlock to secure the bollard in the socket. Padlocks are not supplied. see page 59.
F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept bollards of either Ø75 or Ø115. see page 60.
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
See Note 1
Note 1
12 kg 13 kg 12 kg 13 kg 12 kg
14 kg
2.5 kg 1.5 kg
fRont eLeVAtion & GRounD LeVeL section 1:25
linx 200 RAnGelinx 200 miDi RAnGe
knightsbridge
LKB 200steel & cast iron bollard
options:Removablestainless steel & cast iron
375
1220
Ø 75
See Note 1
15 kg
ashton
LAB 200steel & cast iron bollard
options:Removablestainless steel & cast iron
375
1170
Ø 75
See Note 1
15 kg
hale
LHB 200steel & cast iron bollard
options:Removablestainless steel & cast iron
375
1170
Ø 75
See Note 1
15 kg 15 kg
kenton
LNB 200steel & stainless steel bollard
options:Removable
Ø 75
15 kg
375
1135
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
4�
Linx
Com
posi
te B
olla
rds
375
1200
375
1270
375
1275
375
1200
375
1180
linx 100 range
euston
LEB 100steel & cast iron bollard
options:Removablestainless steel & cast iron
knightsbridge
LKB 100steel & cast iron bollard
options:Removablestainless steel & cast iron
ashton
LAB 100steel & cast iron bollard
options:Removablestainless steel & cast iron
hale
LHB 100steel & cast iron bollard
options:Removablestainless steel & cast iron
trafford
LTB 100steel & cast iron bollard
options:Removablestainless steel & cast iron
euston
EB 100cast iron base collar
trafford
TB 100cast iron base collar
Ø 115
Ø 115
Ø 115
Ø 115
Ø 115
Ø 155
Ø 200
See Note 1 See Note 1 See Note 1
21 kg 24 kg 22 kg 22 kg 22 kg 3.5 kg 2 kg
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
steel removable sockets
As standard, removable bollards are supplied with a socket & hinged cover plate. the bollard has a hasp that passes through the cover plate allowing an fb14 padlock to be used. Padlocks are not supplied.
see page 59 for full details
fi composite sockets
An ‘f1 socket’ is available as an alternative to the standard socket & does not require a padlock.
see page 60 for full details
'centurian'785 a/g600 b/g170 dia g.l. sectionhigh security type bollardwith internal reinforcement of steel bar & 'A-20 Premier Mix'
telescopic bollards
furnitubes offer a range of steel telescopic bollards.these lockable bollards can be lowered into the ground when not in use.Anti Ram Raid versions are also available.
see page 66 for full details
TECHNICAL
Materialfurnitubes steel and composite bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
Steel & Cast Ironstandard finish is galvanised post with primer finished cap and base collar. We recommend that top coats are applied on site after installation.
Stainless Steel & Bronzeoptionally the post can be supplied in bright polished stainless steel with a cast cap and base collar in either cast iron or polished cast bronze.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. the bollard has a fixed spigot that passes through the hinged cover plate allowing an fb14 padlock to secure the bollard in the socket. Padlocks are not supplied. see page 59.
F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept bollards of either Ø75 or Ø115. see page 60.
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
Note 1
See Note 1See Note 1
linx 100 RAnGelinx 400 RAnGe
375
1135
Ø 102
linx 400 range
kenton
LNB 400steel & stainless steel bollard
options:Removable
See Note 1
21 kg
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
50▼
ZEN
ITH
701
sat
in p
olish
ed, s
uppl
ied
to H
arbo
ursid
e, b
risto
l
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
51
Sta
inle
ss S
teel
Bol
lard
s
▲ ZENITH 702bright polished removableas supplied to birmingham city university
stainless steel bollards
this makes the Zenith suitable for all areas, including town centres, shopping malls, hospitals and hotels. the Zenith is available in either 115mm or 170mm diameter as standard. furnitubes also offer Zenith Sloped Bollards with tops angled at 45°.
Grade 304 as standard, with grade 316 preferable for costal areas where the bollard may be susceptible to water spray. several options of the Zenith are available, including removable, baseplated, and the option of a satin or bright polished finish. some of furnitubes Zenith bollards are now available at 1000mm height, complying with DDA guidelines. security versions are also available.
Zen 721Zenith banded
Zen 701 RZenith removable
Zen 451Zenith sloped
Zen 701Zenith bollard
the Zenith® bollard range features just some of furnitubes stunning stainless steel bollards. the Zenith® bollard is immensely popular with specifiers due to its clean and simple aesthetics. it is low maintenance, extremely hard-wearing and 100% recyclable.
▲ ZENITH 451 satin polished finishshown here in Westwood cross, Kent
many stainless steel products can be etched in a variety of colours with: ■ standard symbols ■ client specific wording ■ corporate logos ■ simple crests
OPTIONS
some Zenith bollards can be powder coated, allowing the bollards to match the colour of other products within a scheme.
◄ ZENITH 451black powder coated with f1 removable socket,shown in Hereford
▼ ZENITH 701black powder coatedwith white reflective tape
parking pg 89 ash waste pg 245litter pg 228seating pg 182
RAnGe
signage pg 276
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
52B
OLL
AR
DS ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
ZEN 701 SCGrade 304 stainless steelAnti-Ram Raid VersionReinforced with steel insertbright Polished finish
options:satin PolishedGrade 316 stainless steel
zenith
ZEN 701Grade 304 stainless steelbright Polished finish
options:Removablebase Platedsatin PolishedGrade 316 stainless steel
Ø 115
ZEN 702Grade 304 stainless steelbright Polished finish
options:Removablebase Platedsatin PolishedGrade 316 stainless steel
Ø 115
Ø 170
600
900
300
900
900
300
ZEN 702 SCGrade 304 stainless steelAnti-Ram Raid VersionReinforced with steel insertbright Polished finish
options:satin PolishedGrade 316 stainless steel
Ø 170
600
900
52 kg19 kg30 kg10 kg
▼ ZENITH Slopedinstalled at the Junction - tunnel Retail Park, thurrock
ZenitH RAnGe
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
fRont eLeVAtion & GRounD LeVeL section 1:25
Details of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59-61.
ZEN 801 DDAGrade 304 stainless steelbright Polished finish
options:Removablebase Platedsatin PolishedGrade 316 stainless steel
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
300
1000
12 kg
Ø 115
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. see page 59.
F1 Socketf1 sockets are available as an alternative to our standard sockets to accept bollards of Ø115 diameter. they are a composite of cast iron and mild steel. All fixings are stainless steel. see page 60.
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
see notes 1 & 2 see note 1 see notes 1 & 2
Note 2
Note 1
TECHNICAL
Materialfurnitubes stainless steel bollards are 100% recyclable.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
53
Sta
inle
ss S
teel
Bol
lard
s
zenith sloped
ZEN 451Grade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
Ø 170
300
900
19 kg
ZEN 851 DDAGrade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
ZEN 451 SCGrade 304 stainless steelsatin Polished finishReinforced with steel core
options:bright Polished finishGrade 316 stainless steel
ZEN 452Grade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
ZEN 452 SCGrade 304 stainless steelsatin Polished finishReinforced with steel core
options:bright Polished finishGrade 316 stainless steel
Ø 115
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
300
900
10 kg
Ø 170
600
900
52 kg
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
300
1000
Ø 115
600
900
30 kg
ZenitH RAnGe
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
1:25 fRont eLeVAtion & GRounD LeVeL section
Details of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59-61.
Ø 115
900
600
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
Ø 115
300
900
zenith banded
ZEN 721Grade 304 stainless steelbright Polished with two satin Polished bands
options:satin Polished with two bright Polished bandsRemovable with f1 socketbase Plated
ZEN 721 SCGrade 304 stainless steelbright Polished with two satin Polished bandsReinforced with steel core
options:satin Polished with two bright Polished bands
10 kg 30 kg
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
300
900
Ø 170
19 kg
ZEN 722Grade 304 stainless steelbright Polished with two satin Polished bands
options:satin Polished with two bright Polished bands Removablebase Plated
ZEN 722 SCGrade 304 stainless steelbright Polished with two satin Polished bandsReinforced with steel core
options:satin Polished with two bright Polished bands
Ø 170
900
600
Ø 115
ZEN 821 DDAGrade 304 stainless steelbright Polished with two satin Polished bands
options:satin Polished with two bright Polished bandsRemovable with f1 socketbase Plated
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
1000
300
Ø 115
12 kg
12 kg52 kg Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. see page 59.
F1 Socketf1 sockets are available as an alternative to our standard sockets to accept bollards of Ø115 diameter. they are a composite of cast iron and mild steel. All fixings are stainless steel. see page 60.
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
Note 2
Note 1
TECHNICAL
Materialfurnitubes stainless steel bollards are 100% recyclable.
see notes 1 & 2 see note 1 see notes 1 & 2
see notes 1 & 2 see notes 1 & 2see note 1
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
54B
OLL
AR
DS
▲ ALPINEnew for 2009
▲ DECOnew for 2009
STAINLESS STEELbollards
furnitubes are able to offer stainless steel versions of bollards traditionally made in steel, such as the Holborn bollard, shown below, embellished with polished bronze castings. the Harbour bollard shows how stainless steel and timber can be combined to interesting effect.
DISTINCTIVE STYLEDue to their excellent strength properties and distinctive clean-cut neck detail, Kenton bollards have become popular as traffic bollards. the Millennium bollard was adapted from a bespoke design made for the millennium. it combines a modern rectangular profile with a simple, elegant rounded top.
the triangular form of the Pinnacle bollard serves as an enhancement to modern locations. the Wharf bollard was developed to combine the hard-wearing properties of stainless steel in a unique curved organic triangular form.
in addition to the Zenith® Range, furnitubes offer an extensive range of hard-wearing stainless steel bollards.
▲ MILLENNIUMsatin polished finishas installed in Hornchurch, essex
◄ PINNACLEsatin polished finishinstalled at Waterloo, London
▲ WHARFsatin polished finish, as installedin boston, massachusetts
▲ KENTON 711satin polished finish with yellow tapeinstalled in ealing
▲ HOLBORNstainless steel & bronze bright polished finishdesigned for Lb Hammersmith
▲ HARBOURsatin polished finish. as supplied to Innova Park, Enfield
▲ ELTHAMnew for 2009
many of furnitubes stainless steel bollards, such as the Alpine and Deco are available with red reflective tape to aid visibility.
more...
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
55
Sta
inle
ss S
teel
Bol
lard
s
ALPineDeco
eLtHAmHARbouR
oVAL
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Materialfurnitubes stainless steel bollards are 100% recyclable.
Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. the bollard has a fixed spigot that passes through the hinged cover plate allowing an fb14 padlock to secure the bollard in the socket. Padlocks are not supplied. see photo on page 59.
F1 Socketf1 sockets are available as an alternative to our standard sockets to accept bollards of Ø115 diameter. they are a composite of cast iron and mild steel. All fixings are stainless steel. see page 60.
Note 2
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
Note 3
1:25 fRont eLeVAtion & GRounD LeVeL section
oval
OVA 712Grade 304 stainless steelsatin Polished finish
options:Grade 316 stainless steel
100
300
900
300
1000
eltham
ELT 715Grade 304 stainless steelsatin Polished finish
options:RemovableGrade 316 stainless steel
150
sq10 kg16 kg 10 kg
harbour
HBR 440Grade 304 stainless steelsatin Polished finishHardwood timber inserts
options:bright Polished finishbase PlatedGrade 316 stainless steel
120
sq30
010
00
22 kg
300
900
holborn mk.2
HOL 510 stainless steel body and Root with bronze caps and Ringsbright Polished finish
options:Removablecast iron caps, Painted finish
holborn major mk.2
HOL 520 stainless steel body and Root with bronze caps and Ringsbright Polished finish
options:Removablecast iron caps, Painted finish
Ø 170
285
1000
salisbury mk.2
SAL 530 stainless steel body and Root with bronze caps and Ringsbright Polished finish
options:Removablecast iron caps, Painted finish
salisbury major mk.2
SAL 540 stainless steel body and Root with bronze caps and Ringsbright Polished finish
options:Removablecast iron caps, Painted finish
Ø 170Ø 115
320
1000
305
1000
340
1000
Ø 115
42kg17 kg35 kg20 kg
see notes 1 & 3 see notes 1, 2 & 3 see notes 1 & 3
deco
DEC 712Grade 304 stainless steelsatin Polished finish
options:Red tapeGrade 316 stainless steel
100
200 200
HoLboRnsALisbuRY
alpine
ALP 700Grade 304 stainless steelsatin Polished finish
options:Red tapeRemovableGrade 316 stainless steel
300
1000
10 kg
Ø 100
see notes 1 & 3
Note 1
see notes 1 & 3 see note 3
see notes 1, 2 & 3
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
56B
OLL
AR
DS
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Materialfurnitubes stainless steel bollards are 100% recyclable.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. see details on page 59.
F1 Socketf1 sockets are available as an alternative to our standard sockets to accept bollards of Ø115 diameter. they are a composite of cast iron and mild steel. All fixings are stainless steel. see page 60.
Note 2
Details of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.
for security installation,see page 344.
for removable options, see pages 59-61.
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
300
850
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
wharf
WHA 452Grade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
kenton
KEN 711Grade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
KEN 712Grade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
millennium
MIL 701Grade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
Ø 115
Ø 170
300
900
300
900
ZEN451 ZEN452 PIN452MIL701 WHA452KEN711 & KEN712
ZEN451
1000mm length DDA
900
300
see notes 1 & 2
pinnacle
PIN 452Grade 304 stainless steelsatin Polished finish
options:bright Polished finishRemovablebase PlatedGrade 316 stainless steel
150
tria
ngul
ar
120 x 60 90tr
iang
ular
11 kg 20 kg 9 kg 10 kg
300
900
KentonmiLLenniumPinnAcLeWHARf
▲ KENTONsatin polished finish with red reflective tapeinstalled in tanner street, London
fRont eLeVAtion & GRounD LeVeL section 1:25
10 kg
Note 1
see note 1 see note 1 see note 1 see note 1
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
Ent
er s
peci
fic to
pic
here
57
ACCESScontrol
for locations where traffic needs to be controlled at certain times, or to prevent ram-raiding, there are a variety of products available, ranging from removable to telescopic bollards.
▼ T
PR 5
76 B
lack
Pow
der
Coa
ted
Tele
scop
ic B
olla
rds
inst
alle
d in
tw
icke
nham
, Lon
don
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
5�B
OLL
AR
DS
from removable sockets to fold down posts, furnitubes have the right access control solution for you.
SELECTING THE RIGHT PRODUCT the table below can help you select the right product.
ACCESSbollards
PU
CI
AL
S
SS
PUS SSSS
KEY
cast iron
Aluminium
steel
stainless steel
Polyurethane elastomer
furnitubes traffic management products are available in a wealth of materials, including cast iron, aluminium, steel, stainless steel and Pu, often the same or similar design to their non-removable counterparts, allowing flexibility and harmony within traffic calming schemes.
CI AL S SS PU
■ areas that require a flat flush finish when not used
■ use where fire brigade access not required
■ for Ø75 and Ø115 bollards
see pages 60 - 61
CI AL S SS
■ steel removable socket with padlock
■ fire brigade access possible with fb14 padlock
■ two sizes suitable for the majority of bollards
see page 59
■ bollard lowers into the ground, completely concealed when not in use
■ takes seconds to operate
■ discreet lock in the top of the bollard
see pages 66 - 67
■ same design with several applications
■ fixed, fold-down, li-flat or removable
■ fire brigade fb14 padlock version available
see pages 64 - 65
■ steel removable bollard with lifting handles
■ specifically designed to protect shutter doors
■ protects against ram-raiding
see pages 62 - 63
the f1 socket is also compatible with railings - see page 135
TELESCOPICBOLLARDS
AUTOPA BOLLARDS
BURR BLOC
F1SOCKET
REMOVABLE SOCKET
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
5�
Rem
ovab
le S
ocke
ts
REMOVABLE SOCKETSin standard steel
180
320
250190
150
320
removable sockets
small
SOCK SSsteel socket andHinged cover PlateGalvanised finishfor bollards under 170mm Ø or sq at ground level.
options:shallow mount
large
SOCK LSsteel socket andHinged cover PlateGalvanised finishfor bollards of at least170mm Ø or sq atground level
options:shallow mount
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Materialfurnitubes steel sockets are 100% recyclable.
Removable Bollards Removable bollards are supplied with a socket & hinged cover plate.the bollard has a fixed spigot that passes through the hinged cover plate allowing an fb14 padlock to secure the bollard in the socket.
FB14 padlockthe fire brigade are equipped with master keys that allow them to unlock the distinctive yellow fb14 padlock during an emergency, rather than having to cut through the bollard. furnitubes are able to offer these upon request.
F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept bollards of either Ø75 or Ø115. see page 60.
the majority of furnitubes bollards can be converted to fit inside a standard removable socket.
the bollard is fitted with a spigot that fits snugly into the socket. A hasp plate then fits through the lid of the socket enabling it to be locked. most customers prefer to use a bright yellow fb14 padlock because the fire brigade hold master keys that enable them to remove the bollard in an emergency, rather than having to cut through.
■ suits virtually all bollards and posts
■ strong steel construction
■ bollards removed within seconds of unlocking the padlock
■ suitable for emergency access when used with fb14 fire brigade padlock
■ lid covers holes when bollard is not being used
■ no separate parts to get lost
■ 100% recyclable
▲FB14 Padlock (not supplied)
◄ BATTLE Removableshown here at st George’s Walk, Vauxhall
ZENITH Removable ►supplied to Homstall Parade, edgware
◄ exploded view of EDINBURGH REMOVABLE
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
60B
OLL
AR
DS
BOLLARD (STAINLESS STEEL KENTON, KEN 711, SHOWN)
TYPICAL BOLLARD(CAST IRON CANTERBURY, SHOWN)
SPIGOT PORTIONENCLOSEDWITHIN SOCKET
CAST ALUMINIUM KEY
CAST PLUG
CAST IRON LID
STAINLESS STEEL RETENTION BOLT
CAST IRON BODY
POLYETHYLENE HOUSING
CAST IRON BASE
SPIGOT PORTIONENCLOSED WITHIN SOCKET
CAST PLUG
STAINLESS STEELBOLLARD PROTECTOR
CAST IRON LOCKING LID ASSEMBLY
STAINLESS STEEL RETENTIONBOLTS (SEE DETAIL ON PAGE 61)
CAST IRON MAIN BODY
GALVANISED STEEL HOUSING AND BASE
DRAINAGE TUBEexploded views of fi75 and fi115 sockets
As an alternative to the standard steel removable socket (shown on the previous page), furnitubes are now able to supply an alternative type of socket that provides a neat solution for locations that do not require the standard fire-brigade padlock access or where a hinged flap cover is not desirable.
these sockets are designed to accept a bollard or spigot of either 75 or 115mm diameter. they are based around a heavy-duty cast-iron body with a hole to accept the bollard and a separate hole to access the special retention bolts. these bolts enable the socket to firmly grip the bollard. two lids are also supplied per socket, one to hide these bolts and the other to cover the main hole when not in use. operating instructions are provided on the next page.
F1 COMPOSITE
▲ CANTERBURY(removable version shown with f1 75 socket outside the Royal Albert Hall, London)
removable sockets
removable railings pg 135
f1 sockets for railing posts
▲ ZENITHremovable version shown with f1 115 socket installed at beaufont Park, Hendon
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
61
Rem
ovab
le S
ocke
ts
160
345
large fi socket
F1 115composite Removable socket cast iron Lid & cast Aluminium Keyto accept bollards ofØ115mm diameter
options:shallow mount
21.5 kg
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Foundation NotePrepare hole at least 75mm deeper than overall height of the socket and fill below with hard-core or gravel to allow for drainage.
Place the socket in the centre of the hole, ensuring that there is good clearance on all sides, and hold in vertical position.
Pour concrete and compact well and check that socket is vertical until it has set.
note: if existing ground is loose or uncompacted, a wider/deeper base of concrete should be used.
Optional Shear Boltsfurnitubes can provide bollards that are attached onto a lower spigot using nylon ‘shear bolts’ to enable the fire brigade to knock it over with little or no damage during an emergency.
the sockets enable the spigot to be removed and re-used with new nylon bolts - ask our technical sales staff for further details.
BOLLARD (STAINLESS STEEL KENTON, KEN 711, SHOWN)
TYPICAL BOLLARD(CAST IRON CANTERBURY, SHOWN)
SPIGOT PORTIONENCLOSEDWITHIN SOCKET
CAST ALUMINIUM KEY
CAST PLUG
CAST IRON LID
STAINLESS STEEL RETENTION BOLT
CAST IRON BODY
POLYETHYLENE HOUSING
CAST IRON BASE
SPIGOT PORTIONENCLOSED WITHIN SOCKET
CAST PLUG
STAINLESS STEELBOLLARD PROTECTOR
CAST IRON LOCKING LID ASSEMBLY
STAINLESS STEEL RETENTIONBOLTS (SEE DETAIL ON PAGE 61)
CAST IRON MAIN BODY
GALVANISED STEEL HOUSING AND BASE
DRAINAGE TUBE
■ aesthetically pleasing solution
■ neat retention bolts hidden from view
■ strong composite construction
■ removal of posts within a few minutes
■ can be blanked off when a post is not used
1:25 fRont eLeVAtion & GRounD LeVeL section
1. to access the retention bolts, remove the locking lid of the f1 75. this is done by inserting the aluminium key and turning it anti-clockwise.
2. next, undo the single retention bolt and remove the damaged bollard.
3. insert the bollard, so thatit is resting on the base of the socket. then tighten the retention bolt fully to secure the bollard. finally replace the locking lid.
1. firstly remove the lid of the f1 115 by turning the aluminium key anti-clockwise until the lid can be removed.
small fi socket
F1 75composite Removable socketcast iron Lid& cast Aluminium Keyto accept bollards of Ø75mm diameter
options:shallow mount
130
270
11.5 kg
smALL fi 75 socKet oPeRAtion LARGe fi 115 socKet oPeRAtion
2. next, make sure the stainlesssteel bollard protector is installed, insert the bollard until it is resting on the base of the socket.
3. to secure the bollard, tighten both retention bolts fully. the f1 115 has the space to store the pedestrian plug within the cavity. finally replace the lid.
300
300
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
62▼
BU
RR
BLO
C M
K.6
inst
alle
d at
May
flow
er R
etai
l Par
k, B
asild
on
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
63
Rem
ovab
le B
urr
Blo
c
isometRic VieW not to scALe
in 1989 furnitubes and the Dixons stores Group undertook a joint research programme to f ind the most effective means of protection against Ram Raiding. the f indings led to the development of the burr bloc, the f irst removable security bollard specif ically designed to protect shutter doors.
since its introduction in 1990, the burr bloc has proven itself by foiling every attempted ram raid on Dixons premises and is now installed at Dixons Group stores nationwide.
As a result of their continuous research and development programme, furnitubes now offer the advanced burr bloc mk.6. Along with numerous strength and operational enhancements, the mk.6 boasts an integral lock f itted to the body of the bollard for use with registered security keys.
burr bloc mk.6
BBLOC 6steel Removable security bollard, main socket, storage socket,Lid Lifting Handle, Padlock and Registered security Keys17 kg lifting weight
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
FinishHot-dipped zinc galvanised.
Keyed AlikeWhen ordering burr blocs with integral locks, specify whether all posts are required keyed alikeor to have individually numbered locks.
Replacement Locksthe integral locks can be replaced separately if damaged.call our sales Dept for more information.
Installationfor the best protection of a building, bollards should be installed no less than 2m from the fascia to be protected.
the distance from centre to centre of burr blocs should be no more than 1.4m. When positioned next to a fixed bollard this dimension should be no more than 1.25m
Sold Securefurnitubes are delighted to advise its customers that the burr bloc mk6 uses a multi-lock approved padlock which holds the sold secure accreditation.
LIFTING HANDLES
HASP PROTECTION
HEAVY DUTY 5mm THICKSQUARE STEEL BOLLARD
HINGED STEEL FACE PLATEANTI-SLIP TREAD SURFACE
STRENGTHENING RIBSWELDED TO REAR FACE
ENCLOSED FULLLENGTH HINGE PIN
STEEL BASE TRAY FOR GROUND FLUSH HOUSINGOF FACE PLATE
HIGH SECURITY SLIDINGBOLT PADLOCK
“EYE” TO ENABLE LOCKING WHEN STORED
BOLT-DOWNSTORAGE SOCKET
TIE-BAR FOR CONCRETE ANCHORING
HEAVY DUTYSQUARE STEEL SOCKET
650
750
285
410
100
60
BURR BLOCremovable anti-ram raid bollard
▲ BURR BLOC MK.6operation
◄ BURR BLOC MK.6integral lock detail
▲ BBLOC 6shown locked into main socket
▲ BURR BLOC MK.6& storage socket shown separately
1:25 fRont eLeVAtion & GRounD LeVeL section
■ heavy duty 5mm thick steel bollard ■ lifting handles ■ high security integral lock ■ tie bar for concrete anchoring ■ deep 650mm root
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
64
AUTOPAcar park posts
the fold-down version of the Autopa range (shown left) has the option of an integral locking device for ease of operation, and units can be supplied keyed alike or to differ.
the Li-Flat post is ideal in areas where it is felt beneficial to have the posts completely hidden and with no obstruction when not in use. this hinged post folds down and is housed within its own storage box and is hidden by a durable steel lid that fits flush to the ground. this lid also covers the hole when the post is in the raised position.
car parking posts are meant as a visual deterrent, and naturally, will not withstand excessive abuse. Heavier duty options are shown on pages 66 - 67.
security, sympathetic styling and ease of handling are all important considerations when deciding upon car park posts.
the Autopa range, which can be supplied as f ixed, fold-down or removable posts, is functional, sturdy and attractive.
▲ A300 LF Autopa Li-Flat Fold-Downwith integral lockoptional plastic coated yellow finish(shown housed within storage box)
▲ A300 LF Autopa Li-Flat Fold-Downwith integral lockstandard galvanised finish
▼ A
300
Aut
opa
Fold
-Dow
n w
ith in
tegr
al L
ock
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
65
Car
Par
k P
osts
TECHNICAL
ArrowsArrows next to the illustration indicate the direction of movement to the post’s unlocked/ resting position.
Material & FinishAll car park posts are manufactured principally in steel & are supplied in a galvanised finish as standard.
Keyed AlikeWhen ordering car park posts with integral locks, specify whether all posts are required keyed alike or to have individually numbered locks.
Note 1
FB Padlockfor use with an fb padlock - not supplied - available upon request.
Note 2
the A300P has two holes. the lower hole locks the post in the upright position (as shown). the top hole is used to store the padlock when the post is lowered.
Note 3
A300 LFfold Down Li-flat car Park Postwith integral Lock. Galvanised finish
options:Plastic coated Yellow finish
see note 1
autopa range
A300 RRemovable car Park Postfor Padlock fixing
A300 Ffixed car Park Post
options:Ø48 x 750 above groundPlastic coated Yellow finish
see note 2
305
915
160
autopa range
A300fold Down car Park Postwith integral Lock
options:Plastic coated Yellow finish
A300 GLCfold Down car Park Postwith integral Lock and Removable Hinge Pinto take a fb Padlock
A300 Pfold Down car Park Postfor Padlock fixing
see note 1 see note 2
750
750
265
915
155
750
205 20
5
205
100100 100
see notes 2 & 3
9066
022
0
865
Ø 76
1:20 fRont eLeVAtion & PLAn VieW
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.
152
cent
res
152
cent
res
152
cent
res
AutoPA cAR PARK Posts
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
66
TELESCOPICsecurity posts
for those that need security bollards that can be lowered into the ground when not in use, furnitubes range of telescopic bollards combine strength with aesthetic appeal to provide this dual function. telescopic bollards meet the requirements of a wide variety of security needs, from preventing access to driveways to stopping ram raid attacks.
the bollards are designed for ease of use, taking just seconds to raise each one and lock into place using its integral high security lock. When not in use the post is completely concealed, sliding discretely into the ground where it is covered by a steel flap.
▲ TPR 800Round Telescopic Bollardin raised and lowered positions
the majority of the range is available in a galvanised or polyester powder coated finish.
A stainless steel version is now also available, to compliment furnitubes existing range of stainless steel bollards and other street furniture.
▲ TPS 700Square Telescopic Bollardin raised position
▲ TPR 600Round Telescopic Bollardblack Powder coated finishshown at Westwood cross, Kent
▲ TPR 300Round Stainless Steel Telescopic Bollardin raised position and top detail
▼ T
PR 6
00 G
alva
nise
d St
eel T
eles
copi
c Bo
llard
in r
aise
d po
sitio
n
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
67
Tele
scop
ic S
ecur
ity B
olla
rds
for a more traditional look a Victorian style ornamental top is available for some of the bollards. the top locks into place when the bollard is in the raised position and is removed when it is lowered.
580
810
670
960
670
960
850
1140
670
960
ø 76
ø 89 90
ø 114
1140
850
ø 114
ø 89
580
810
670
960
670
960
850
1140
670
960
ø 76
ø 89 90
ø 114
1140
850
ø 114
ø 89
580
810
670
960
670
960
850
1140
670
960
ø 76
ø 89 90
ø 114
1140
850
ø 114
ø 89
580
810
670
960
670
960
850
1140
670
960
ø 76
ø 89 90
ø 114
1140
850
ø 114
ø 89
driveway telescopic
TPR 576steel, Galvanised and Polyester Powder coated black or Yellow
options:other bs or RAL colours available
round telescopic
TPR 700steel, Galvanised finish
options:Polyester Powder coatedornamental locking top
TPR 800Anti Ram Raid versionsteel, Galvanised finish
options:Polyester Powder coatedornamental locking top
square telescopic
TPS 700steel, Galvanised finish
options:Polyester Powder coated
TPS 800Anti Ram Raid versionsteel, Galvanised finish
options:Anti-cut 100mm squarePolyester Powder coated
ornamental locking top
CT 001Victorian-style cast Alum cap Polyester Powder coated black with Rings Highlighted in Gold
for use with the Polyester Powder coated versions of the TPR 700 & TPR 800 onLY
furnitubes now offer a tough new Polyurethane elastomer (Pu) Anti-Ram Raid telescopic bollard. the durable Pu is cast around a reinforced steel core that offers low maintenance coupled with excellent resistance to the weather and many other types of abrasion.
TECHNICAL
Keyseach post is supplied with one key.Please specify whether all posts are required keyed alike or to have individually numbered locks. Additional keys can be supplied as optional extras.
Installationfor the best protection of a building, bollards should be installed no less than 1.3m from the fascia to be protected.A distance from centre to centre of bollards of 1.25m is recommended, and should not exceed 1.4m. Lifting weightsthe lifting weights for the telescopic bollards are as follows:TPR 576 - 8 kgTPS 700 - 12 kgTPS 800 - 14 kgTPR 700 - 12 kgTPR 800 - 14 kgTPR 390 - 14 kgTPR 600 - 17 kgTPR 300 - 22 kgTPB 725 - 22 kg
Foundationto ensure sufficient drainage. a combination of concrete and loose chippings will be required. see page 346 for more information.
stainless steel telescopic
TPR 390Anti Ram Raid bollardstainless steel, satin finish
large round telescopic
TPR 600steel, Galvanised finish
options:Polyester Powder coated finish
580
810
670
960
670
960
850
1140
670
960
ø 76
ø 89 90
ø 114
1140
850
ø 114
ø 89
580
810
670
960
670
960
850
1140
670
960
ø 76
ø 89 90
ø 114
1140
850
ø 114
ø 89
580
810
670
960
670
960
850
1140
670
960
ø 76
ø 89 90
ø 114
1140
850
ø 114
ø 89
bury - pu telescopic
TPB 725telescopic Anti Ram Raid bollardPolyurethane elastomer formedaround a steel inner coretwo-Pack Polyurethane Gloss finishsteel telescopic socketGalvanised finish
▲ TPB 725Bury PU Telescopic Bollard
1:20 isometRic VieWs
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.
teLescoPic secuRitY Posts
options:fixed bollard
TPR 300stainless steel, satin finish
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
6�
TIMBER CARE & PRESERVATIONfurnitubes offers all customers the following advice when installing our exterior-use timber bollards.normal weather conditions can cause shrinkage and cracking in all timber products, due to their natural reaction to the elements. most furnitubes’ timber products are supplied untreated, enabling application of the most appropriate preservative for the particular installation site.Please contact your local Wood Preservation specialist for further recommendations.
▼ G
AR
RIC
K s
how
n he
re in
bea
ch R
oad,
ber
kshi
re
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
6�
Tim
ber
Bol
lard
s
All hardwoods used by furnitubes international are supplied by countries where governments operate strict controls on the size of trees that can be felled and where a forest conservation policy and replantation programme is in operation.
the Garrick range of square bollards is more economical than most hardwoods and they are often specified for rural and horticultural areas. they are available in either tanalised softwood or oak and can be cut to suit specific overall lengths and widths to suit clients’ requirements.
garrick
use product code prefix GAR followed by width / overall height. use suffix OAK for oak Hardwood or PTS for Prepared tanalised softwood, ie:
GAR 175 /1200 OAK175 wide x 1200mm overall heightoak Hardwood timber
Width
1:25 fRont eLeVAtion & GRounD LeVeL section
TIMBERbollards
furnitubes’ timber bollards harmonise within both natural and man-made surroundings. timber bollards offer a timeless elegance and, being of natural material, age gracefully.
▲ GARRICK installed at st Andrews Hospital, northampton▲ EPPING
shown here outside Greenwich Park, London
▲ EPPINGwith red reflective tapeinstalled in edenbridge, Kent
tot
al o
vera
ll H
eigh
t
the essence of effective timber bollards is the use of hardwoods, such as Greenheart, Wallabe or opepe, which are classified as ‘naturally very durable’ and are used for the Ashdown and Epping ranges.
these timbers are extremely strong and have a good fire resistance. to form a pedestrian barrier, timber bollards can be drilled to accept tube or fitted with eye-bolts for chain. bollards can be supplied with holes to enable them to perform as knee-rail.
▲ ASHDOWNwith red reflective tapeinstalled at Green Lane, stanmore
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
70B
OLL
AR
DS
TECHNICAL
Materialfurnitubes timber bollards are 100% biodegradable.
Hardwood Type Hardwood type is variable due to fluctuating availability of raw materials. Ask about current stock material when making your enquiry.
Epping BollardsPlease note our epping timber bollards have rounded edges of 6mm.
Economy Versionsfor economy, ‘Garrick’ oak or softwood timber bollards can be specified. most sizes are available. Replace product code prefix ESP with GAR and specify either “oak Hardwood” or “Prepared tanalised softwood”. see page 69.
Groovesbollards are available with a square cut groove, to allow for a reflective band if required. Replace product code prefix ESP with ESG if a groove is required.
Holes for Railsmost bollards are available with pre-drilled holes to accept mild steel rails. state sizes & numbers of holes required, height below top of bollard to the centre of the hole & whether the post is an end, intermediate, corner, 3 or 4 way junction, when making your enquiry.
AccessoriesDetails of eye-bolts, chain and other fittings can be found over on page 78.
epping range – durable hardwood timber bollards
ESP 125/750125 sq. x 750mm overall height
ESP 150/750150 sq. x 750mm overall height
ESP 175/750175 sq. x 750mm overall height
ESP 200/750200 sq. x 750mm overall height
ESP 225 /750225 sq. x 750mm overall height
ESP 250 /750250 sq. x 750mm overall height
epping range – durable hardwood timber bollards
ESP 125/1200125 sq. x 1200mm overall height
ESP 150/1200150 sq. x 1200mm overall height
ESP 175/1200175 sq. x 1200mm overall height
ESP 200/1200200 sq. x 1200mm overall height
ESP 225 /1200225 sq. x 1200mm overall height
ESP 250 /1200250 sq. x 1200mm overall height
ESP 125 / 900125 sq. x 900mm overall height
ESP 150 / 900150 sq. x 900mm overall height
ESP 175 / 900175 sq. x 900mm overall height
ESP 125 /1500125 sq. x 1500mm overall height
ESP 150 /1500150 sq. x 1500mm overall height
ESP 175 /1500175 sq. x 1500mm overall height
ESP 200/1500200 sq. x 1500mm overall height
ESP 225 /1500225 sq. x 1500mm overall height
ESP 250 /1500250 sq. x 1500mm overall height
ESP 200 / 900200 sq. x 900mm overall height
ESP 225 / 900225 sq. x 900mm overall height
ESP 250/ 900250 sq. x 900mm overall height
800
400
500
1000
300
600
500
250
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
150sq
175sq
200sq
225sq
250sq
125sq
150sq
175sq
200sq
225sq
250sq
125sq
150sq
175sq
200sq
225sq
250sq
125sq
fRont eLeVAtion & GRounD LeVeL section 1:25
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
150sq
175sq
200sq
225sq
250sq
125sq
ePPinG & GARRicK RAnGe
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
71
Tim
ber
Bol
lard
s
TECHNICAL
Materialfurnitubes timber bollards are 100% biodegradable.
Hardwood Type Hardwood type is variable due to fluctuating availability of raw materials. Ask about current stock material when making your enquiry.
Groovesbollards are available with a square cut groove, to allow for a reflective band if required. Replace product code prefix ARP with ARG if a groove is required.
Holes for Railsmost bollards are available with pre-drilled holes to accept mild steel rails. state sizes & numbers of holes required, height below top of bollard to the centre of the hole & whether the post is an end, intermediate, corner, 3 or 4 way junction, when making your enquiry.
AccessoriesDetails of eye-bolts, chain and other fittings can be found on page 78.
ashdown range – durable hardwood timber bollards
ARP 125 /1200 125 dia. x 1200mm overall height
ARP 150 /1200 150 dia. x 1200mm overall height
ARP 175 /1200 175 dia. x 1200mm overall height
ARP 200 /1200 200 dia. x 1200mm overall height
ARP 225/1200 225 dia. x 1200mm overall height
ARP 250 / 1200 250 dia. x 1200mm overall height
ashdown range – durable hardwood timber bollards
ARP 125/750125 dia. x 750mm overall height
ARP 150 /750150 dia. x 750mm overall height
ARP 175/750 175 dia. x 750mm overall height
ARP 200/750 200 dia. x 750mm overall height
ARP 225/750 225 dia. x 750mm overall height
ARP 250/750 250 dia. x 750mm overall height
ARP 125/ 900 125 dia. x 900mm overall height
ARP 150/ 900 150 dia. x 900mm overall height
ARP 175/ 900 175 dia. x 900mm overall height
ARP 200 / 900 200 dia. x 900mm overall height
ARP 225/ 900 225 dia. x 900mm overall height
ARP 250 / 900 250 dia. x 900mm overall height
ARP 125 /1500 125 dia. x 1500mm overall height
ARP 150 /1500 150 dia. x 1500mm overall height
ARP 175/1500 175 dia. x 1500mm overall height
ARP 200 /1500 200 dia. x 1500mm overall height
ARP 225/1500 225 dia. x 1500mm overall height
ARP 250 /1500 250 dia. x 1500mm overall height
300
600
250
500
Ø125
Ø150
Ø175
Ø200
Ø225
Ø250
Ø125
Ø150
Ø175
Ø200
Ø225
Ø250
800
400
500
1000
Ø125
Ø150
Ø175
Ø200
Ø225
Ø250
Ø125
Ø150
Ø175
Ø200
Ø225
Ø250
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
1:25 fRont eLeVAtion & GRounD LeVeL section
Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.
AsHDoWn RAnGe
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
72▼
MA
NC
HES
TER
PU
with
refl
ectiv
e ta
pe a
nd c
ast
bee,
inst
alle
d at
Fal
low
field
, Man
ches
ter
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
73
Pol
yure
than
e B
olla
rds
POLYURETHANEbollards
the bollards are manufactured from a tough, durable engineering grade polyurethane cast around a steel core. A wide selection of colours are available. standard paint finish is a two pack polyurethane gloss coating available in an extensive range of RAL or bs4800 colour references. bollards may be highlighted in a contrasting colour and some have been designed for use with reflective tape.
WIDE RANGE OF DESIGNSLike other materials offered by furnitubes, Pu is very versatile, enabling a wide range of both traditional and modern designs.
crests and logos can be cast into the material, giving customers the opportunity to create a unique look through use of standard products.
many designs are available and furnitubes are able to create new moulds for almost any size and shape. if you require further information about the other products in the range please contact a member of furnitubes’ dedicated sales team.
Polyurethane elastomer (Pu) is a thoroughly modern material offering low maintenance coupled with excellent resistance to the weather and many other types of abrasion.
▲ CANNON
▲ TRL 900with Yellow reflective tape bands supplied to old Kent Road, London
▲ DORIC ▲ EGHAM
OPTIONS
crests & LogosPainting & highlighting
Available on requestcheck technical details to see what applies to each bollard
Reflective tape Removable versions
▲ CITY - Polyurethane Securitywith integral cast & highlighted crestshown here in central Westminister, London
▲ LEWISHAMshown in Lewisham, London
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
74B
OLL
AR
DS
cannon
CA 0500Polyurethane elastomer bollard
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
see note 2
fRont eLeVAtion & GRounD LeVeL section 1:25
AP02
900
300
HE01
900
300
CH04
300
1135
CH03
300
840
CA02
300
1100
CI0130
010
50
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA02
300
950
ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
canterbury
CTB 001Polyurethane elastomer bollard
options:Reflective tape750mm Height Available
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
FinishStandard paint finish is a two pack polyurethane gloss coating available in an extensive range of RAL or bs4800 colour references.
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
edinburgh
ED 0526Polyurethane elastomer bollard
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
battle
BA 0750Polyurethane elastomer bollard
F1 SocketAn f1 socket is available to accept Pu bollards with a Ø115 diameter spigot. see page 60.
Note 1
see note 1
Disability Consciousbollards over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
egham
EGH 001Polyurethane elastomer bollard
AP02
900
300
HE01
900
300
CH0430
011
35CH03
300
840
CA02
300
1100
CI01
300
1050
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA02
300
950
ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
see note 2
city
CIT 001Polyurethane elastomer bollard
options:With crest
AP02
900
300
HE01
900
300
CH04
300
1135
CH03
300
840
CA02
300
1100
CI01
300
1050
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA02
300
950
ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
see note 2
doric
DO 0520Polyurethane elastomer bollard
options:Reflective tape
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
crewe
CRW 815Polyurethane elastomer bollard
crawley sloped
CRW 115Polyurethane elastomer bollard
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
bAttLebeResfoRD cAnnoncAnteRbuRYcitY
cRAWLeYcReWeDoRic eDinbuRGHeGHAm
beresford
BER 001Polyurethane elastomer bollard
AP02
900
300
HE01
900
300
CH04
300
1135
CH03
300
840
CA02
300
1100
CI01
300
1050
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA0230
095
0ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
see note 2
see note 2
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
75
Pol
yure
than
e B
olla
rds
AP02
900
300
HE01
900
300
CH04
300
1135
CH03
300
840
CA02
300
1100
CI01
300
1050
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA02
300
950
ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
FinishStandard paint finish is a two pack polyurethane gloss coating available in an extensive range of RAL or bs4800 colour references.
transport
TRL 900Polyurethane elastomer bollard supplied with 2 bands of Yellow Reflective tape
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
F1 SocketAn f1 socket is available to accept Pu bollards with a Ø115 diameter spigot. see page 60.
Note 1
Disability Consciousbollards over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
Note 2
GunneR Kenton
LeWisHAmmAncHesteR
tRL 900WARminsteR
WAtfoRD
lewisham
LEW 001Polyurethane elastomer bollard
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
see note 1
warminster medium
WA 0811Polyurethane elastomer bollard
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
see note 1
gunner
GU 0503Polyurethane elastomer bollard
950
300
ø 115ø 210
750
300
ø 150
WA01940210114
LL031000150139
ST02970200115
LE011064152x152114
RO011000135114
NO04800250193
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
800
200
300
195
975
300
300
ø 180 ø 90
1000
300
950
ø 115 ø 90 ø 100 ø 90
900
300
ø 145 ø 115
750
300
ø 165 ø 115
920
300
ø 170
ø 90
980
300
155
sq ø 90
815
300
ø 170
ø 90
1000
300
ø 135 ø 115
750
300
150
sq ø 115
1140
300
ø 210 ø 140
1000
300
205
sq ø 140
900
300
ø 150
ø 90
790
300
170
sq ø 90
915
300
ø 130
ø 90
see note 1
warminster large
WAR 002Polyurethane elastomer bollard
AP02
900
300
HE01
900
300
CH04
300
1135
CH03
300
840
CA02
300
1100
CI01
300
1050
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA02
300
950
ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
see note 2750
d168
300
d89
560
d160
350
d89
900
d135
350
d89
967.5
d145
300
d89
NO01880105x10589
LI0197518089
DE02100011589
HA011000195139
FA021000110sq76
CY0180010089
975
300
300
ø 180 ø 90
975
300
800
ø 115 ø 90 ø 100 ø
750
300
560
350
900 97
030
0
830
300
ø 90ø 170
ø 90ø 160 ø 90ø 160ø 90ø 135 ø 90ø 14
5
950
300
ø 145
350
watford
WAT 145Polyurethane elastomer bollard
AP02
900
300
HE01
900
300
CH04
300
1135
CH03
300
840
CA02
300
1100
CI01
300
1050
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA02
300
950
ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
kenton single neck
KEN 001Polyurethane elastomer bollard
AP02
900
300
HE0190
030
0CH04
300
1135
CH03
300
840
CA02
300
1100
CI01
300
1050
200
250CR01
300
900
SO01
900
300
300
950
965
300
810
300
EX01
300
950
SU01
900
300
MA01
950
300
GU01
750
300
LL01
1050
300
GA01
830
300
SH01
300
200
AP02S002 SQ03
900
300
ø 155 ø 140
ø 90ø 200
900
300
CH04
ø 90
300
1220
ø 185
CH03
ø 135 ø 90
300
840
CA02
ø 170 ø 90
300
1100
CI01
100
300
140
1050
200
250CR01
300
ø 160
ø 140
900
300
ø 160 ø 140
DA02
300
950
ø 210
ø 90
965
300
ø 115 ø 60
810
300
ø 150
ø 90
EX01
300
950
ø 140 ø 60
900
300
ø 160 ø 90
950
300
ø 115ø 210
750
300
ø 150 ø 115
1050
300
ø 115 ø 90
830
300
ø 115
178
sq
300
ø 115
125
200
900
ø 140ø 160
900
1200
900
1000
900
170
sq 900
150
sq
300
300
300
300
kenton double neck
KEN 002Polyurethane elastomer bollard
manchester
MAN 001Polyurethane elastomerbollard
options:Reflective tape
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
76B
OLL
AR
DS
▲ ABERDEEN CIRCULARwith reflective white tape
these bollards provide a durable, environmentally friendly option for large developments or temporary sites. the bollards are long lasting, robust, low maintenance and recyclable.
made from high quality preprocessed recycled plastics, they can be treated the same way as timber bollards, with connections such as screwing possible, allowing the provision of chains, signs and reflective tape.
RECYCLED PLASTICbollards
▲ ABERDEEN SQUARE
furnitubes offer an economical range of recycled plastic bollards.
RECYCLED PLASTIC■ long lasting & robust
■ economical
■ low maintenance
■ 100% recycled & recyclable
■ weather proof
■ uV stable
■ splinter & knot free
Available in brown or black as standard
▲ ABERDEEN CIRCULAR with chain (special commission)
shown here at the national trust, buckingham
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
77
Rec
ycle
d B
olla
rds
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TECHNICAL
Disability Consciousbollards over 1000mm aid the visually impaired and can assist with the requirements of bs8300.
glasgow sloped
GLA 100beech colouredsemi-rough finish satin Polished stainless steel cap
optionsGalvanised steel cap
13 kg
300
1000
120
sq
recycled composite bollards
glasgow flat
GLA 100beech colouredsemi-rough finish satin Polished stainless steel cap
optionsGalvanised steel cap
13 kg
300
1000
RECYCLED COMPOSITEbollards
recycled plastic bollards
aberdeen circular
ABR 150solid Recycled Plastic brown colour
optionsGraphite black colour
20 kg
500
1000
Ø 150
aberdeen circular
ABR 150 Tsolid Recycled Plasticbrown colourwith 15mm wide band of White Reflective tape
optionsGraphite black colour
20 kg
500
1000
Ø 150
185
aberdeen square
ABR 140solid Recycled PlasticGraphite black colour
optionsbrown colour
23 kg
380
1000
140
sqfurnitubes recycled composite timber bollards are made from 100% recycled material. made from 50% sawdust & 50% HDPe, the product maintains a natural wood texture and appearance at a reduced environmental and economic cost.
100% Recyclablethe Aberdeen bollards are 100% recyclable
Reflective Aidsthe Aberdeen bollards are available with reflective tape and discs, as shown below.
■ environmentally friendly
■ weather resistant
■ impervious to rot & wood
eating organisms
■ durable & easy to maintain
■ low water absorption
■ f ire proof performance
■ crack resistant
RECYCLED COMPOSITE
free from knots, rot and splinters, furnitubes recycled composite bollards are a viable alternative to timber bollards.
120
sq
looks just like real timber!
Note 1
see notes 1 & 2 see notes 1 & 2 see notes 1 & 2 see note 2 see note 2
recycled plastic planters pg 320
recycled composite slats pg 165
for recycled products
recycled plastic slats pg 164 Note 2
► GLASGOW FLAT with stainless steel cap
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
7�B
OLL
AR
DS
A range of standard accessories is available to adapt furnitubes bollards for other uses.
Eye bolts can be fitted to bollards and used in conjunction with Split Links and Chain Links to more effectively define area boundaries.
eye bolt
EBABsteel m10 eye boltbright Zinc Plated
50
FB14 padlockthe fire brigade are equipped with master keys that allow them to unlock the distinctive yellow fb14 padlock during an emergency, rather than having to cut through the bollard. furnitubes are able to offer these upon request.
ChainWhen calculating meterage requirements, remember to take into account the extra length required to allow for the ‘sagging’ of the chain.
Reflective TapeWe do not recommend that tape is fitted onto primed bollards. finish painted / stainless steel surfaces are preferred. Adhesion cannot be guaranteed if supplied loose.
Coloursthe tape colours shown here are a guide only and may not match the actual reflective colours.
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
split link
SLNKsteel split Link Galvanised
chain link
CHNSsteel spiked chain Link Galvanised
see note 1 see note 1
reflective tape
TAPE RRed Reflective tape
TAPE WWhite Reflectivetape
see note 2
TAPE yYellow Reflective tape
TAPE CRed / White chevron Reflective tape
Red
White
Yellow
Red / White chevron
CHNPsteel Plain chain LinkGalvanised
5050
50
35
60 60 5533
55
Note 1
Note 2
see note 2
ACCESSORIESchain, eyebolts & reflective tape
▲ MANCHESTERhighlighted with reflective tape
◄ GUNNERwith eye-bolts & spiked chain linksupplied to canterbury cathedral, Kent
TECHNICAL
1:5 fRont VieW
Reflective Tape provides enhanced visibility in poor lighting conditions and at night to enable vehicles to navigate more safely through routes that are demarcated by bollards.
Reflective tape is available in a range of colours and can be fitted to many bollards at positions to best suit the application.
Alternative colours, grades and widths can be provided upon special request. contact a member of our sales team for advice, availability and prices.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
7�
Spe
cial
Com
mis
sion
s
COMMISSIONSspecial
most bollards can be adapted with raised or flat sections that are suitable for affixing crests or for signs that would otherwise require a separate mounting post. this helps to rationalise and reduce the ‘visual clutter’ caused by having too many different products and styles.
furnitubes' award-winning Design Partnership service is expert in providing bespoke solutions.
the unique Maidstone bollard, with bronze inset ring and distinctive typography was developed to satisfy a range of visual and performance criteria, winning unanimous critical acclaim.
▲ MAIDSTONEwith bronze inset ring
CITY ►with D.o.t sign 637/638
◄ CANNONwith cast aluminium plaque
furnitubes skilled design team are available to handle bespoke commissions or to develop new designs.
▼ TRAFALGAR LARGEwith gold painted crest,installed in Holborn, London
CANNON ▲with D.o.t sign
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
�0B
OLL
AR
DS
▲CITY HIGH SECURITY Bollard Sleevessupplied to Grosvenor square, London
the City polyurethane bollard has been cast around a solid manganese steel inner core for added security against terrorism. it is embellished and highlighted with an integral plaque.
◄▲ CITY - Polyurethane Securitywith integral cast & highlighted crestshown here in central Westminster, London
◄ BURY TELESCOPICmodified to accept FB14 fire brigade padlock shown here at broomhouse Drawdock, London
these Bury Telescopic posts have been f itted with a special cap fabrication to accept a standard f ire brigade type padlock for emergency access.
the City High Security is a larger square version of the city and is designed to f it over a specially designed ‘anti-terror’ steel inner core.using cast aluminium sleeves in this way retains the heritage of an area and also enables unsightly security bollards to be embellished with crests (as shown here with the Westminster crest)
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
�1
Spe
cial
Com
mis
sion
s
ASH WASTE BOLLARDScurrent indoor smoking legislation has made it necessary to provide cigarette ash and butt bins outside public places, such as restaurants, museums and pubs. furnitubes are pleased to offer a range of solutions, designed for strength and style and to cut off the air supply to burning cigarettes that are placed within. the Zenith also features a stubber plate. the full range can be found in the Litter & Waste section.
▲ ZENITH ASH WASTE BOLLARD
▲ SMOKE KINGbolt down
◄ SMOKE KING wall mounted
the Zenith Sloped bollards have been etched and inf illed with numerals to function as parking bay indicators.
ZENITH SLOPED ►with etched infilled graphics
◄▲ ZENITH SLOPEDwith etched logoshown at Wembley Retail Park, London
many of furnitubes’ products can be adapted to suit clients’ needs. At the new Wembley Arena, the Zenith Sloped bollards have been etched with a logo to create an identity for the area.
specialCOMMISSIONS
Furnitubes International LimitedMeridian House, Royal Hill
Greenwich, LondonSE10 8RD
tel +44 (0)20 8378 3200fax +44 (0)20 8378 3250www.furnitubes .com
For possible modifications or updates, please refer to www.furnitubes.com
© Furnitubes 2012