FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® 2-, 3-, and 4-High Lateral Files T...
Transcript of FUNDAMENTAL Table of Contents Metal Filing · FUNDAMENTAL® 2-, 3-, and 4-High Lateral Files T...
➤See page
Statement of Line 5.2
Planning 5.3
Overview 5.3
Product Information 5.4
Filing Capacities 5.5
Locking Information 5.6
Pricing 5.7
Lateral Files 5.7
Overfiles 5.9
Storage Cabinets 5.9
Accessories 5.10
Surface Materials 5.11
Paint 5.11
Price List Effective Dates: Pricing 03.02.20 Revision 05.18.20
Metal Filing
FUNDAMENTAL® Table of Contents
Page 5.1 Fundamental Kimball Surfaces, Storage, & Files
Metal Files and Cabinets Statement of LineIMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions.
Fundamental Kimball Surfaces, Storage, & Files
Page 5.2
2-High Lateral Files
➤See page 5.7 to specify.
30"W 36"W 42"W
27"H • • •
3-High Lateral Files ➤See page 5.7 to specify.
30"W 36"W 42"W
39"H • • •
4-High Lateral Files ➤See page 5.7 to specify.
30"W 36"W 42"W
51"H • • •
5-High Lateral Files Available with five drawers, four drawers and fixed shelf with lift door, ADA-compliant models, or five drawers and posting shelf. ➤See page 5.8 to specify.
30"W 36"W 42"W
65"H • • •
Overfiles
➤See page 5.9 to specify
30"W 36"W 42"W
29"H • • •
Storage Cabinets ➤See page 5.9 to specify.
30"W 36"W 42"W
27"H • • • 39"H • • • 51"H • • • 65"H • • •
Counterweight Kits ➤See page 5.10 to specify.
Overfile/Storage Cabinet Shelves and Wardrobe Kits ➤See page 5.10 to specify.
File Bars and Drawer Dividers ➤See page 5.10 to specify.
FUNDAMENTAL®
Metal Filing
Overview O PlanningFUNDAMENTAL®
Metal Filing
Fundamental Kimball Surfaces, Storage, & Files
Page 5.3
Drawer Pull Options:
Three drawer pulls are available on Fundamental files.
Extended is recessed along the full front edge.
Rail*
Arc* *Suitable for ADA applications.
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
Top is finished so the file can be used as a stand alone unit.
Knockouts are standard for ganging side-by-side or for securing to a wall.
Counterweight kit, specified sepa-rately, is required for all individual free-standing units. Kits include counterweight and bracket, packaged individually.
Four glides, standard, provide 3⁄4" adjustability and allow for sturdy, four-point loading.
Fixed shelf with lift door on appli-cable five-high lateral files replaces top drawer and accommodates standing binders up to 12"H.
Locking is standard. Select key random or key specific. Note: Lock cores must be specified separately for key specific option.
Integrated drawer slide and single interlock mechanism are part of the slide design, providing for quieter drawer operation and ensuring only one drawer may be opened at a time. Built-in anti-rebound catch pre-vents drawer from accidently rolling open.
Full ball-bearing drawer suspen-sion allows both the drawer and suspension to extend together.
Side-to-side file bars are standard; two per drawer. Front-to-back file bars are available separately for easy field installation.
Label holder is standard with ex-tended pull; one per drawer.
Replacement drawer fronts can be field installed.
Details
Lateral file construction features coach seam welds. Right angle bend of the coach seam makes the strongest use of formed metal and presents a clean exterior with no exposed welds. Progressive slide suspension pro-vides smooth drawer operation. Steel drawer interiors are pre-painted cinder. ADA compliant lateral files feature the choice of rail or arc pull. The lock is placed at 385⁄8"H (above the third drawer), making it accessible from a seated position. Posting shelf, available on five-high lateral file, includes magnetic spring latch to open and close. Posting shelf is located above the third drawer and is 13⁄8"H.
Drawer fronts and lift doors in the top position on five-high lateral files are 19⁄16" taller than the other drawer fronts to accommodate the re-ceding lift-door application. Exception: Drawer fronts on models with posting shelf are all the same height. Posting shelf is 13⁄8"H. Letter, legal and A4 filing is accom-modated with conventional or hanging folders. ➤See page 5.5 for filing capacities. Side-to-side legal or letter filing can be accommodated with file bars that ship standard in file. Front-to-back filing can be accom-modated by ordering the appropriate number of front-to-back file bars separately.
Overfiles and storage cabinets feature hinged doors. IMPORTANT: Shelves and wardrobe kits are specified separately for field installation. Shelves are adjustable at 2" increments. Four adjustable glides are stan-dard, providing 1" adjustability.
Connections Knockouts are standard in all files and cabinets for ganging side-by-side. Overfile can be used independently or in addition to any appropriate width Fundamental file or storage cabinet.
Related Products
Counterweight kit, specified sepa-rately, is required for all individual free-standing units. ➤See page 5.10. Laminate file tops for use Fundamental and LF Series are available to provide a continuous worksurface over one or more files. ➤See the laminate file tops page in the Footprint Worksurfaces & Support chapter in the Kimball Surfaces & Storage Price List. Paper management accessories are available. ➤See page 5.10.
Product Information P PlanningFUNDAMENTAL®
Metal Filing
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
Fundamental Kimball Surfaces, Storage, & Files
Page 5.4
Filing Hardware: Heavier lines in the illustrations at right indicate filing hardware. Front-to-back file bars can be specified separately. ➤See the Perks chapter in the Kimball Desks & Accessories Price List. Side-to-side file bar is standard; one per drawer. Drawer divider can be specified separately. ➤See page 5.10.
Inside Inside Description Depth Width Height Filing Arrangements
18"D x 30"W lateral 147⁄8" 267⁄8" 93⁄8" 295⁄8" letter 251⁄4" legal 2613⁄16" letter 2613⁄16" legal Front-to-back file bars (2) Front-to-back file bar (1) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2)
18"D x 36"W lateral 147⁄8" 327⁄8" 93⁄8" 295⁄8" letter 295⁄8" legal 3213⁄16" letter 3213⁄16" legal Front-to-back file bars (2) Front-to-back file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2)
18"D x 42"W lateral 147⁄8" 387⁄8" 93⁄8" 447⁄16" letter 355⁄8" legal 3813⁄16" letter 3813⁄16" legal Front-to-back file bar (2) Front-to-back file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2) Side-to-side file bars (2)
Filing Capacities PlanningFUNDAMENTAL®
Metal Filing
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
Fundamental Kimball Surfaces, Storage, & Files
Page 5.5
Fundamental
FUNDAMENTAL®
Metal Filing
Fundamental Kimball Surfaces, Storage, & Files
Page 5.6
Locking Information
Model/Key Range Price
Black Lock Core with Black Hinged Key KSCD001 to KSCD300 † $ 27
Silver Lock Core with Black Hinged Key KSCG001 to KSCG100 † $ 27
Change Key KCCB1CK † $ 9
Master Key KS2GMK † $ 15
How to Specify ! Specify exact key number for
lock cores as the model number or model number for change or master key
Locking storage units can be specified as: • Key random • Key specific Lock cores are shipped separately for field installation. Black lock cores with black hinged keys are identical to the ones available on the following Casegoods products: • Definition • Priority • Transcend Silver lock cores are matte nickel and have black hinged keys. These lock cores and keys are identical to the ones available on the following products: • Definition • Fluent • Priority
Key Random Option:
When key random option is selected, key numbers will be assigned arbitrarily at the factory with key numbers ranging from KSCD001 to KSCD300 (black) or KSCG001 to KSCG100 (silver). Randomly numbered lock core(s) will ship standard along with your order for field installation.
With random keying, different furniture units may or may not have the same key number. If you must have all locks keyed differently or all locks keyed the same, choose the key specific option.
Key Specific Option:
When key specific option is selected, the storage unit will be pre-drilled to accept a lock core; however, no lock cores will be shipped standard with the unit. If lock cores are standard on the unit, the price of the unit is re-duced by the price of the lock core or cores. You must specify lock core(s) separately for key specific option; specify any key number from KSCD001 to KSCD300 (black) or KSCG001 to KSCG100 (silver).
To key all the furniture units in a work -station or department alike, choose the key specific option and order the quantity of locks needed for your in-stallation.
Standard key that ships with the lock core can be used for the initial installa-tion of the lock core in the field. Change key model KCCB1CK al-lows removal of keys within these ranges: KSCD001–KSCD300 KSCG001–KSCG100 IMPORTANT: A change key, specified separately, is required to remove lock cores in the field.
Master key model KS2GMK will un-lock any lock within these key ranges: KSCD001–KSCD300 KSCG001–KCCG100KSCD001 KSCD101 KSCD025
KSCD001 KSCD223
KSCD001 KSCD198
KSCD005
KSCD005
KSCD005
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
Planning
Standard Includes
• 2, 3, or 4 drawers • One lock: black or silver • Two side-to-side file bar per drawer • Floor glides; adjustable to 3⁄4"
How to Specify ! Model 2 Pull option: R = Rail, textured black E = Extended, same paint as file ARC462 = Arc, Cinder ARC485 = Arc, Dark Chocolate ARC501 = Arc, Platinum Metallic ARC503 = Arc, Satin Nickel ARC505 = Arc, Bronze Metallic ARC514 = Arc, Carbon Metallic 3 Lock option: KRB = Key random, black KRS = Key random, silver KSB = Key specific, black (-$ 27 ;
specify one lock core separately) KSS = Key specific, silver (-$ 27 ;
specify one lock core separately) 4 Finish price group: STD = Group 1
STDM = Group M (+10%) 5 Finish designator
D W H Model Price 2-High Lateral Files 18" 30" 271⁄4" FND18302 $ 1015
36" FND18362 1104
42" FND18422 1190
3-High Lateral Files 18" 30" 393⁄16" FND18303 $ 1188
36" FND18363 1349
42" FND18423 1464
4-High Lateral Files 18" 30" 511⁄8" FND18304 $ 1441
36" FND18364 1623
42" FND18424 1831
Fundamental Kimball Surfaces, Storage, & Files
Page 5.7
2-, 3-, and 4-High Lateral Files T PricingFUNDAMENTAL®
Metal Filing
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. ➤See page 5.10. Front-to-Back File Bars ➤See the Perks chapter in the Kimball Desks & Accessories Price List. Laminate File Tops ➤See Footprint Worksurfaces & Support chapter in the Kimball Surfaces & Storage Price List.
GSA SIN 711-3
D W H Model Price 5-High Lateral Files 18" 30" 641⁄2" FND18305 $ 1931
36" FND18365 2114
42" FND18425 2312
5-High Lateral Files with Fixed Shelf and Lift Door 18" 30" 641⁄2" FND18305LD $ 2018
36" FND18365LD 2200
42" FND18425LD 2395
5-High Lateral Files, ADA Compliant 18" 30" 641⁄2" FND18305ADA $ 2114
36" FND18365ADA 2293
42" FND18425ADA 2493
5-High Lateral Files with Posting Shelf 18" 30" 641⁄2" FND18305PS $ 2120
36" FND18365PS 2304
42" FND18425PS 2503
5-High Lateral Files F PricingFUNDAMENTAL®
Metal Filing
Fundamental Kimball Surfaces, Storage, & Files
Page 5.8
Standard Includes
• Five lateral file drawers (four draw-ers and fixed shelf and lift door on applicable models)
• One lock: black or silver • Two side-to-side file bar per drawer • Floor glides; adjustable to 3⁄4"
How to Specify ! Model 2 Pull option: R = Rail, textured black E = Extended, same paint as file
(not available on ADA Compliant models)
ARC462 = Arc, Cinder ARC485 = Arc, Dark Chocolate ARC501 = Arc, Platinum Metallic ARC503 = Arc, Satin Nickel ARC505 = Arc, Bronze Metallic ARC514 = Arc, Carbon Metallic 3 Lock option: KRB = Key random, black KRS = Key random, silver KSB = Key specific, black (-$ 27 ;
specify one lock core separately) KSS = Key specific, silver (-$ 27 ;
specify one lock core separately) 4 Finish price group: STD = Group 1
STDM = Group M (+10%) 5 Finish designator
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. ➤See page 5.10. Front-to-Back File Bars ➤See the Perks chapter in the Kimball Desks & Accessories Price List.
GSA SIN 711-3
D W H Model Price Overfiles 18" 30" 291⁄4" FND1830OF $ 902
36" FND1836OF 945
42" FND1842OF 1023
Storage Cabinets 2 High
18" 30" 271⁄4" FND18302SC $ 1055
36" FND18362SC 1115
42" FND18422SC 1247
3 High
18" 30" 393⁄16" FND18303SC $ 1115
36" FND18363SC 1168
42" FND18423SC 1301
4 High
18" 30" 511⁄8" FND18304SC $ 1168
36" FND18364SC 1238
42" FND18424SC 1370
5 High
18" 30" 641⁄2" FND18305SC $ 1233
36" FND18365SC 1311
42" FND18425SC 1441
Fundamental
Overfiles and Storage Cabinets PricingFUNDAMENTAL®
Metal Filing
Fundamental Kimball Surfaces, Storage, & Files
Page 5.9
Standard Includes
• One lock: black or silver • Floor glides on storage cabinets;
adjustable to 3⁄4"
How to Specify ! Model 2 Keying option: KRB = Key random, black KRS = Key random, silver KSB = Key specific, black (-$ 27 ;
specify one lock core separately) KSS = Key specific, silver (-$ 27 ;
specify one lock core separately) 3 Finish price group: STD = Group 1
STDM = Group M (+10%) 4 Finish designator
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
IMPORTANT: Shelves and wardrobe kits are specified sepa-rately for field installation. Shelves are adjustable at 2" increments. ➤See page 5.10. Laminate File Tops ➤See Footprint Worksurfaces & Support chapter in the Kimball Surfaces & Storage Price List.
GSA SIN 711-3
FundamentalD W H For use with Model Price Counterweight Kits 11⁄8" 231⁄4" 115⁄8" Any width file FNDACW $ 223
Overfile/Storage Cabinet Shelves 161⁄8" 281⁄2" 1" 30"W unit FND1830LFSHP $ 97
341⁄2" 36"W unit FND1836LFSHP 101
401⁄2" 42"W unit FND1842LFSHP 105
Wardrobe Kits 23⁄4" 291⁄2" 33⁄4" 30"W unit FND1830WB $ 85
351⁄2" 36"W unit FND1836WB 94 411⁄2" 42"W unit FND1842WB 97
Side-to-Side File Bars 30"W file KFD30SS $ 67 36"W file KFD36SS 72 42"W file KFD42SS 77
Drawer Divider 1011⁄16" 31⁄16" 71⁄2" KFDPM $ 43
Accessories PricingFUNDAMENTAL®
Metal Filing
Fundamental Kimball Surfaces, Storage, & Files
Page 5.10
Standard Includes
• Wardrobe kit: galvanized finish • Side-to-side file bars: galvanized
finish • Drawer divider: galvanized finish
How to Specify
Counterweight Kit, File Bars, Drawer Dividers ! Model Shelf ! Model 2 Finish price group: STD = Group 1
STDM = Group M (+10%) 3 Finish designator
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
IMPORTANT: Counterweight kit, specified separately, is required for all freestanding lateral files. Shelves and wardrobe kits are specified separately for field installa-tion. Shelves are adjustable at 2" increments. IMPORTANT: Drawer divider hooks on back of drawer body and can be used in any file.
GSA SIN 711-3
Fundamental Kimball Surfaces, Storage, & Files
Statement of Line ➤See page 5.2
Planning 5.3
Pricing 5.7
Surface Materials 5.11
Surface Materials
Page 5.11
FUNDAMENTAL®
Metal FilingPaint
Paint
Price Group 1 480 Antique White 427 Barley 437 Cement 403 Chamois 462 Cinder 440 Cloud 485 Dark Chocolate 405 Designer White 453 Environmental Grey 459 Featherstone 450 Fog 488 Frosty White 461 Graphite 445 Moon Beam 416 Putty 420 Sandstone 425 Shadow 465 Smoke 460 Storm 429 Tantalum 419 Wallaby
Price Group M 514 Carbon Metallic 507 Patina Metallic 501 Platinum Metallic 505 Satin Bronze Metallic 504 Taupe Metallic
Applies to: • Lateral files • Overfiles • Storage cabinets
Applies to: • Arc pulls
462 Cinder 485 Dark Chocolate 514 Carbon Metallic 501 Platinum Metallic 505 Satin Bronze Metallic 503 Satin Nickel Metallic 544 Silver Pearl
➤See the Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: • Characteristics of wood • Special wood finishes • Customer-specified laminate (CSL) • Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM)
overview • Alliance program • TB133 process Customer-specified paint (CSP) is available. ➤See the Surface Materials Reference Guide.
Fundamental Kimball Surfaces, Storage, & Files
Page 5.12
FUNDAMENTAL®
Metal FilingNotes