Functions - Corbin Russwin Russwin... · 2015-05-19 · Functions ED8000 ED8000.9 Trim Design...
3
Functions ED8000 ED8000.8 Rim ED8200 ED8200B ED8200A Inside Outside Surface Vertical Rod ED8400 ED8400A Inside Outside Type ANSI No. Function Descriptions Exit Only F01 • Exit only; no trim. Dummy F02 • Entrance by trim when actuating bar is locked down. Nightlatch F03 • Entrance by trim when latch bolt is retracted by key. Key removable only when locked. Classroom F08 • Entrance by knob or lever. Key locks or unlocks knob or lever. Passage — • Latch bolt retracted by knob or lever. Storeroom (Lever Active) F09 • Entrance by knob or lever only when released by key. Key removable only when locked. Indicates rigid grip when locked. Note: Trims shown are for function representation only. See pages 9 and 10 for available trims. 45075-7/13
Transcript of Functions - Corbin Russwin Russwin... · 2015-05-19 · Functions ED8000 ED8000.9 Trim Design...
FunctionsED8000
ED8000.8
RimED8200
ED8200B ED8200A
Inside Outside
Surface Vertical RodED8400
ED8400A
Inside Outside
Type ANSI No. Function Descriptions
Exit Only F01 • Exitonly;notrim.
Dummy F02• Entrancebytrimwhenactuatingbarislocked
down.
Nightlatch F03• Entrancebytrimwhenlatchboltisretractedby
key. Key removable only when locked.
Classroom F08• Entrancebyknoborlever.Keylocksorunlocks
knob or lever.
Passage — • Latchboltretractedbyknoborlever.
Storeroom(LeverActive)
F09• Entrancebyknoborleveronlywhenreleasedby
key. Key removable only when locked.
Indicates rigid grip when locked.
Note:Trimsshownareforfunctionrepresentationonly.Seepages9and10foravailabletrims.
45075-7/13
FunctionsED8000
ED8000.9
Trim Design
Trim/Function
PassageDummy
ANSI No. F02Classroom
ANSI No. F08Nightlatch
ANSI No. F03Storeroom
ANSI No. F09
ArmstrongA6Lever: Die cast zincRose:Wroughtbrassor bronzeCylinder: Key-in-leverAvailable in plated finishes only.
A610 A650 A655 A6572 A659
NewportN6Lever: Die cast zincRose:Wroughtbrassor bronzeCylinder: Key-in-leverAvailable in plated finishes only.
N610 N650 N655 N6572 N659
PrincetonPR6Lever: Die cast zincRose:Wroughtbrassor bronzeCylinder: Key-in-leverAvailable in plated finishes only.
PR610 PR650 PR655 PR6572 PR659
GlobalG10Knob:WroughtRose:Wroughtbrassor bronzeCylinder: Key-in-knobAvailable in plated finishes only.
G1010 G1050 G1055 G10572 G1059
Flat PlateF1Plate: SteelCylinder: RimAvailable in plated and painted finishes.
N/A F1501 N/A F1572 N/A
Z-PullP1Pull: ExtrudedCylinder: RimAvailable in plated finishes only.
8"
4-1/2"
2"
N/A P150 N/A P1572 N/A
Notes:1.BlankplatewithnoANSIfunction.2.NotrecommendedforusewithED8400orED8400ASurfaceVerticalRoddevices.
3-1/2"
4"
45075-7/13
Offset Pull Trim: P12, P13, P14*
Offset PullP12Clearance:2-1/2"
SpecifyPartNumber,716F50MxFinish1
Offset PullP13Clearance:2-1/2"
SpecifyPartNumber,716F51MxFinish1
Offset PullP14Clearance:2-1/2"
SpecifyPartNumber,716F52MxFinish1
FunctionsED8000
ED8000.10
2.NotrecommendedforusewithED8400orED8400ASurfaceVerticalRoddevices.
Trim Design
Trim/Function
PassageDummyANSI No.
F02
ClassroomANSI No.
F08
NightlatchANSI No.
F03
Wing PullP8Pull: ExtrudedCylinder: RimAvailable in paintedfinishes only.
N/A P850 N/A P8572
Offset PullP2Pull: ExtrudedCylinder: RimAvailable in plated finishes only.
4-13/16"
5-3/4"
2-1/4"
N/A P250 N/A P2572
Key OnlyKOCylinder: RimNote:Availablewithcylinder option only.Ex: K057 x 6P
N/A N/A N/A KO572
P12 P13 P14 Clearance
2-1/2"4" 4" 3"
10" 10"
11"
18"19"
10-3/4"
P12 P13 P14 Clearance
2-1/2"4" 4" 3"
10" 10"
11"
18"19"
10-3/4"
P12 P13 P14 Clearance
2-1/2"4" 4" 3"
10" 10"
11"
18"19"
10-3/4"
1. Available in 605, 606, 612, 613, 626, 629 and 630 finishes.*Availableon1-3/4"thickdoorsonly.
45075-7/13
