Fume Hood FGL Series

Green Product

High durability

NO rusty

Termite resistant

Chemical Resistant

Suitable for any appli-

cation.

Hot Welding process

Simple maintenance

Knock down type

Fume Hood

Activity in the laboratory is a lot of activity that

involves several factors such as chemicals (acids,

alkalis, organic solvents, non-organic solvents,

oxidizing and so on), temperature, humidity and so on.

The use of suitable material is a must in the products

that will be used in the laboratory.

the use of consideration, in addition to match the

laboratory activities, we are also considerations

about the environment. industrial process becomes an

important part in protecting and maintaining the

environment. so the selection of an option-based

plastic material.

The plastic that we use is a special plastic that is

used to contact the strong acids, strong bases,

organic solvents, oxidator and physical properties

suitable for the needs of the laboratory.

FGL Series fume hood is a need to react to a variety

of hazardous chemicals. FGL series has the following

specifications.

Fume Hood

FGL Series

Application:

General laboratory

School

University

Exterernal laboratory

Food industry

Polymer industry

Water laboratory

Environment labora-

tory

PT LAB TECHNOLOGI INDONESIA

JL Swadaya Raya Kp. Muara bers RT 02/04 Suka hati karadenan Cibinong Bogor

Telp. 021 292 10 773 | Fax. 021 292 10 773

Website. Www.labtech-indonesia.com

Specification

Brand LABTECH

Series FGL 12C FGL 16C FGL 18C

Dimension 1200X800X2400 1600X800X2400 1800X800X2400

Material Copolymer Polypropylene material based

Top Table (Optional) Phenolic resin thickness 6 mm

Laboratory Grade solid Phenolic core, high pressure composite panel.

Specifically designed for wet laboratory environments and engineered

to profide maximum chemical and stain resistant characteristic

Baffles weldable (semi- crystalline) thermoplastics polypropylene, smooth

surface, chemical resistant.

Cabinet Storage High Strength polymer polypropylene or Metal powder coating

Electrical requirements 220V, 50 Hz, 1 phase

Fluorecent Lamp favor proof Light output 1025 lm

Direct Centrifugal Fan 0.5 HP-1 Phase 1 HP-3 Phase 1.5 HP-3 Phase

Fan Speed 1400-2800 RPM. Polypropylene Chemical Resistant Impeller and Hosing,

Electric Motor, Knock Down

PVC Ducting Diameter 6", Max 4m Diameter 6", Max 4m Diameter 10", Max 4m

Front Access Door Control for maintenance and adding fixtures

Acrilyc Glass Thicknes 6 mm with frame

Automatic Door Optional Optional Optional