Fully Integrated 36” Bottom Mount...Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi...
Transcript of Fully Integrated 36” Bottom Mount...Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi...
Fully Integrated 36” Bottom Mount
KF 1913 Vi / KF 1903 Vi
8mieleusa.comSpecification Sheets TRS 01092018
SPECIFICATIONS
F 1903 Vi — Item 37190301USA - Right Hinged
F 1913 Vi — Item 37191301USA - Left Hinged
Overall Unit Width 353/4” (908 mm)
Overall Unit Height 84” (2134 mm)
Overall Unit Depth 24” (610 mm)
Niche
Minimum Cabinet Opening Width 36” (915 mm)
Minimum Cabinet Opening Height 84” (2134 mm)
Minimum Cabinet Opening Depth 25” (635 mm)*
Interior Volume
Fresh Food Volume 18.68 cu-ft (529 L)
Freezer Volume 5.21 cu-ft (147.5 L)
Plumbing
Water Supply Requirements
Connect to a cold water supply only. Do not connect to a low-mineral or a reverse osmosis system. Must be connected to a shut-off valve. The water shut-off valve must be accessible after installation. The water pressure must be between 25 psi (1.7 bar) and may not exceed 80 psi (5.5 bar). If the pressure is higher than 80 psi (5.5 bar), a pressure reducing valve must be installed.
Water Connection Line
Standard 1/4” O.D flexible water line. The maximum outer diameter of the water pipe (without fittings): 3/8” (10 mm). Water line is not included.
Electrical
Electrical Requirements - Volts/Amps
110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations,a separate outlet must be used for eachappliance.
Power Cord - Plug and length NEMA 5-15 plug, 5 ft (1.52 m)
Custom PanelPlease refer to the manual for further details.
Maximum Panel Weight Upper door - 84 lbs (38 kg)Lower door - 31 lbs (14 kg)
Maximum Panel Thickness 11/2” (38 mm)
Minimum Panel Thickness 3/4” (19 mm)
Shipping
Shipping Weight 511.6 lbs (232 kg)
Shipping Dimensions 391/2” W x 8913/16” H x 291/4” D
Support
Call Miele (800) 999-1360
Miele Website 8www.mieleusa.com
20/20 Link 82020technologies.com
KF 1913 Vi / KF 1903 ViPage 2 of 9
KF 1913 Vi / KF 1903 ViFeatures:• MasterCool controls • ClearView lighting system• Drop and Lock Shelves• SmartFresh storage drawers• FullView storage drawers• Ice maker• RemoteVision capable• Acoustic door and temperature alarm • Optical door and temperature alarm• Energy Star
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi
Please note the following:• This specification sheet is for a single built-in unit.• When combining multiple MasterCool units side-by-side, please refer to the Merging Kit specification sheet. *If design calls for a partition less than 6 5/16” (160 mm) the left unit’s cutout will require an additional 1/8” (3 mm) to the width to allow installation of the Heating Mat/Merge Kit.
FOR FLUSH INSTALLATION
KF 1913 Vi / KF 1903 ViPage 3 of 9
* Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi
KF 1913 Vi / KF 1903 ViPage 4 of 9
POWER SUPPLY AND WATER CONNECTIONBACK VIEW
Water connection is located in front of unit.1/4” compression fitting is needed.
Electrical - 5 foot (1.52 m) - 120 Volt - 15 Amp - NEMA 5-15 molded plugWater line - 1/4” flexible water line - not included
DOOR PANEL DIMENSIONSKFP 3613 - Top PanelKFP 3623 - Bottom Panel(Available as an accessory)
26 7
/16”
(672
mm
)53
5/1
6”(1
354
mm
)
35 3/4”(908 mm)
1/8”- 3/16”(3 - 5 mm)
4” (102 mm)
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi
KF 1913 Vi / KF 1903 ViPage 5 of 9
LOWER HINGE LOCATION
Upper Door
29 11
/16"
29 1
/8 -
29 1
/2"
Hinge
Hinge
Lower Drawer
1/2"
- 2
3/8"29
1/8
” - 2
9 1/
2”(7
40 -
749
mm
)
29 1
1/16
”(7
54 m
m)
1/2”
- 2
3/8”
(13
- 60
mm
)
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi
KF 1913 Vi / KF 1903 Vi Page 6 of 9
CUSTOM PANEL INSTALLATIONS
Pan
el "
B"
Hei
ght
Width: 35 3/4" in all casesThickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Notes: Finish back side of panels to insure appearancePanel may extend above unit. This is notconsidered in height calculation
Upper Maximum panel weight: 83.8 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
HOM = Total height of machine. Can be adjusted tomatch adjoining cabinets - typically 84"HOM is adjustable between 83 1/2" - 85 3/8"
TKH = Toe-kick height (2" - 8 3/8")
Lower Maximum panel weight: 31 Pounds
Upper Panel
TKH
HO
M
Pan
el H
eigh
t
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied bythe cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surroundingcabinets.
Panel size is determined in the following manner:
Lower Panel
Upper Panel NotesIf the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Machine
Extended Panel Example:Ajoining cabinet height: 87"Height of machine: 84"Difference: 3"
Extended panel height: 56 5/16"
84 Pounds
HOM - 53 9/16” (1360.5 mm) - TKH
53 5/16” (1354 mm)
35 3/4” (908 mm) in all casesMinimum 3/4” (19 mm) outside frame
87” (2210 mm)84” (2133 mm)3” (76 mm)
56 5/16” (1430 mm)
Total height of machine. Can be adjusted to match adjoining cabinets - typically 84” (2133 mm).HOM is adjustable between 83 1/2” -85 3/16” (2121 mm - 2165 mm)
Lower Maximum panel weight: 31 Pounds
TKH = Toe-kick height 2” - 8 3/8” (51 - 212 mm)
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi
HINGING DETAILS
0-1/8"
Front Panel
1"1-1/4"
1-1/2"
0-3/4"
0-3/4"
1-1/4"1-1/2"1-3/4"2" 1"
Cabinet Front
0-3/4"
1"1-1/4"1-1/2"
0-1/8"
FrontPanel
0-3/4"
1-1/4"1-1/2"1-3/4" 1"
Cabinet Front
rooD °511rooD °09
snoitpo ssenkcihTsnoitpo ssenkcihT
Door Swing
NOTE: Additional space needed depending onthickness of front panels and handle used
38 1
1/16
"
7/16"
Door Swing
16 7/8"MAX
NOTE: Additional space needed depending onthickness of front panels and handle used
38 11
/16” (
982
mm
)
0-3/4” (19 mm
)1” (25 m
m)
1-1/4” (32 mm
)1-1/2” (38 m
m)
1-3/4” (44 mm
)2” (51 m
m)
0-3/4” (19 mm
)1” (25 m
m)
1-1/4” (32 mm
)1-1/2” (38 m
m)
1-3/4” (44 mm
)
0-3/4” (19 mm)1” (25 mm)1-1/4” (32 mm)
1-1/2” (38 mm)0-3/4” (19 mm)
1” (25 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
11 3/4”(298 mm)
Max7/16” (11 mm)
0-1/8” (3 mm) 0-1/8” (3 mm)
KF 1913 Vi / KF 1903 Vi Page 7 of 9
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi
KF 1913 Vi / KF 1903 Vi Page 8 of 9
HINGING DETAILS115o OPENING
0-1/8"
Front Panel
1"1-1/4"
1-1/2"
0-3/4"
0-3/4"
1-1/4"1-1/2"1-3/4"2" 1"
Cabinet Front
0-3/4"
1"1-1/4"1-1/2"
0-1/8"
FrontPanel
0-3/4"
1-1/4"1-1/2"1-3/4" 1"
Cabinet Front
rooD °511rooD °09
snoitpo ssenkcihTsnoitpo ssenkcihT
Door Swing
NOTE: Additional space needed depending onthickness of front panels and handle used
38 11
/16"
7/16"
Door Swing
16 7/8"MAX
NOTE: Additional space needed depending onthickness of front panels and handle used
3”(76.2mm)
1-3/4”(44.5mm)
1-3/8”(35mm
)1-1/6” (29.6m
m)
1/4”(6.4mm
)17/24” (18m
m)
2-1/24”(52mm)2-1/3” (59mm)2-5/8” (67mm)
3”(76.2mm)
1-3/4”(44.5mm)
1-3/8”(35mm
)1-1/6” (29.6m
m)
1/4”(6.4mm
)17/24” (18m
m)
2-1/24”(52mm)2-1/3” (59mm)2-5/8” (67mm)
0-3/4” (19 mm
)1” (25 m
m)
1-1/4” (32 mm
)1-1/2” (38 m
m)
1-3/4” (44 mm
)
1-1/2” (38 mm)
1-1/4” (32 mm)
1” (25 mm)
0-3/4” (19 mm)
0-1/8” (3 mm)
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi
KF 1913 Vi / KF 1903 Vi Page 9 of 9
HINGING DETAILS90o OPEING
0-1/8"
Front Panel
1"1-1/4"
1-1/2"
0-3/4"
0-3/4"
1-1/4"1-1/2"1-3/4"2" 1"
Cabinet Front
0-3/4"
1"1-1/4"1-1/2"
0-1/8"
FrontPanel
0-3/4"
1-1/4"1-1/2"1-3/4" 1"
Cabinet Front
rooD °511rooD °09
snoitpo ssenkcihTsnoitpo ssenkcihT
Door Swing
NOTE: Additional space needed depending onthickness of front panels and handle used
38 11
/16"
7/16"
Door Swing
16 7/8"MAX
NOTE: Additional space needed depending onthickness of front panels and handle used
7/16”(11 mm)
1-3/16”(30mm)
1-7/16”(36.5mm)
1-11/16”(43mm)
1-15/16”(49.2mm)
Handle or object that is NOT flush with Cabinet Front.
0-3/4” (19 mm
)1” (25 m
m)
1-1/4” (32 mm
)1-1/2” (38 m
m)
1-3/4” (44 mm
)2” (51 m
m)
0-3/4” (19 mm)
1” (25 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
0-1/8” (3 mm)
When installing hinge side next to an appliance or object that is within range of the door panel, limit the door opening angle to 90o. This is done by installing the banking pin as illustrated. Insert the banking pin through the holes and drive in with a hammer.
Specification Sheets TRS 01092018
Fully Integrated 36” Bottom Mount KF 1913 Vi / KF 1903 Vi