Fully Automatic Coffee Machine OPERATION MANUAL
23
Fully Automatic Coffee Machine OPERATION MANUAL
Transcript of Fully Automatic Coffee Machine OPERATION MANUAL
cover.pdfBean container cover
Water tank lid
Espresso icon
Precautions
Please see specification label on the bottom of coffee machine or technical date indicated in instruction manual(P20).
Please do not contact with heat parts of coffee machine to avoid scalding.
To avoid operator’s injury caused by burn, electric shock or other unexpected reasons, please do not contact the power cord, plug, and main body with water.
This appliance can be used by children aged from 8 years and above if they have been given super- vision or instruction concerning use of the appli- ance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years. Children shall not play with the appliance. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
02
Warnings
Prohibitions
Never disassemble and repair the machine without authorization. If there is any error, please send it to authorized service center for repairing.
Except for cleaning and daily maintenance to coffee machine, if it fails to work please send it to authorized after-sale service center for repairing, or contact with customer service for after-sale services.
Never immerse the machine into water, and do not put the machine near the water tap or water tank. Never disassemble coffee machine without authorization, for any maintenance
Safety Instructions
If the coffee machine is damaged because of the situation that has been warned above, it is not covered in the warranty!
needs disassembling the machine,please return it to Service Centre or
cocoa
03
Proper operation
Safety Tips
To guarantee the coffee taste, make sure that temperature of the water filled into the water tank is at 25 or so. Coffee machine can only be used for preparing coffee, hot milk, milk foam, and hot water. Do not use it for any other intended use. We will not take any responsibility for the consequences of improper use. Please carefully read all the contents of this manual, so that you can know the coffee machine sufficiently.
Please keep this manual properly for looking up at any time.
Please notice the following tips to avoid personal injury from electric shock.
Symbol description
Reading this manual will help you be familiar with the coffee machine, and use it properly. “Instructions for first-time use " introduces the operation process of coffee machine step-by-step, for first time use. “failures handling" will provide information when encountering problems.
This Manual is only applicable to the coffee machine of QUARZA series and the model KLM1601W, KLM1601B, KLM1601S, KLM1601R..
Non-compliance with the operation, may cause electric shock, and threat to life.
Non-compliance with the operation may cause Coffee machine damaged, or personal injury.
Non-compliance with the operation, may cause scalded or burn injury.
This symbol, if prompted, please carefully read it.
This symbol, if prompted, represents recycle.
04
05
18
19
20
20
05
01
03
03
9
12
17
17
Instructions for use Coffee machine model Symbol description
Instructions for first time use Power connection Fill water tank Fill beans Grinding wheel Power on Power off
Making beverages Preparing coffee by touch icon Single time setting of coffee parameters Preparing coffee with coffee powder
Program setting Maintenance setting Setting beverage parameters and range Temperature setting Energy-saving setting Automatic switch off Reset Information Language Exit
Cleaning and maintenance Cleaning the coffee machine before operation Cleaning brewing unit Rinsing milk unit Descaling the coffee machine Cleaning coffee grounds container and drip tray Cleaning water tank Cleaning bean container Disassembling and cleaning the milk frother Installing milk pipe Cleaning milk pipe Cleaning coffee machine
Transport and recycle
Instructions for first-time use
This chapter will help you understand the basic operations and settings for your first time use
Power connection
Fill water tank
Only purified water at room temperature is allowed to fill in the water tank, never fill any other liquid (e.g. warm water, hot water, milk). It will damage coffee machine. In order to ensure the taste of coffee, it is recommended to use water at 25 or so. Low temperature water will not make a good taste.
Fill beans
Never put the coffee beans that have been specially treated (e.g. sugar, cocoa) into the bean container.
Only roasted coffee beans can be put into the bean container, never put others like rice, soybeans, chocolate beans, nuts, sugar, and spices. Never put hard objects into the bean container, otherwise it will damage the grinder. The bean container cover playing a role as seal. It keeps the aroma of coffee beans maximally. Please do not lose the cover.
Don't fill the liquid in the bean container.
Grinding wheel
Please adjust the fineness of coffee bean powder according to the coffee beans.
Power on
As the machine has been tested at factory, there may be a little coffee powder left . We promise the machine is brand new.
Every time powering on the coffee machine, it will automatically complete heating and cleaning for one time, and the process cannot be stopped. The coffee machine can only be used after finished the above cycle process.
During the cleaning process, some hot water may flow out of the coffee spout into the drip tray. Please avoid contacting the spilling hot water.
READY
Every time when powering off the coffee machine, it will automatically complete cleaning process for one time, and the process cannot be stopped. This operation is to clean up the coffee pipelines and remove the coffee grounds.
During the cleaning process, some hot water will flow out of the coffee spout into the drip tray. Avoid touching spilt hot water, so as not to be burned.
Only after using milk/cream/cappuccino/lattee, the Rinse Milk Unit function will be operated when power off.
When you press power button, the machine will be
power off after auto cleaning.
READY
This chapter instructs you making various kinds of coffee, hot water, hot milk and milk foam by this coffee machine. Please read the following instructions carefully to help you make high-quality beverages.
The temperature of the hot water is high, please do not touch it to avoid being scalded.
Before we make all kinds of coffee, please ensure “READY” is indicated on the display.
STRONG
ENJOY !
ESPRESSO
The volume of espresso is suggested between 30 to 50ml. Because of the small volume of espresso, please warm the coffee cup before making coffee.
Touch the espresso icon for espresso function.
the grinder will begin to grind . At this time you can adjust the amount of coffee beans by rotating the rotary button. Default amount of coffee beans for espresso:
During making coffee, you can adjust the volume of coffee by rotating the rotary button. Default volume of espresso: 50ML
When the screen shows as the left picture, it means the espresso is ready, please enjoy it.
READY
ESPRESSO
You can make 4 kinds of coffee by touch icons, when the screen shows “READY”
Take espresso for example to explain how to make coffee by touch icons.
08
Single time setting of coffee parameters
When grinding the coffee beans, you can rotate the rotary button to adjust the amount of coffee beans, to left is mild , and to right is strong . The default amount is normal .
Detail instructions
VOLUME 60ML
CREAM 30S
MILK 30S
VOLUME 40ML
8 items as bellow can be set at single time.
You can set the fineness of coffee and the volume of beverage before or during making the beverage at single time, the setting will not be saved.
Before making hot water, the temperature can be adjusted by rotating the rotary button. To left is low, to right is high. The default temperature is normal.
When making hot water, the hot water volume can be adjusted by rotating the rotary button. For example, the current volume is 150ML, 2 cells to left to reduce to 145ML, and 2 cells to right to increase to 155ML.
When making cappuccino, milk foam or coffee latte,cream making time can be adjusted by rotating the rotary button while milk foam outflows. For example,the current time is 20s,2 cells to left to reduce to 19S, and 2 cells to right to increase to 21S.
When making hot milk or coffee latte, milk making time can be adjusted by rotating the rotary button. For example, the current milk making time is 20S, 2 cells to left to reduce to 19S, and 2 cells to right to increase to 21S.
When making coffee, coffee volume can be adjusted by rotary button. For example, the current volume is 100ml, 2 cells to left to reduce to 95ml, and 2 cells to right to increase to 105ml.
Making beverages
Preparing coffee with coffee powder
You can choose this function if you want to make coffee with coffee powder.
Prohibit filling other mixtures such as instant coffee powder or cocoa powder in the powder container. Otherwise it will damage the machine.
Do not fill the coffee powder into the coffee bean container, otherwise, it will damage the machine.
Do not rinse the powder container with water, or it will result in operator’s injury by electric shock.
Please use proper grounded coffee powder for espresso.
Only 7-14g coffee powder can be added. Machine will be damaged with more powder.
Making beverages
Long press rotary button to enter into setting when the coffee machine is “READY”.
Display shows “USE POWDER” page after entered into setting. Press rotary button to make coffee.
Open powder container cover and fill the coffee powder, then close cover. Touch the beverage icon you need to make coffee. Press rotary button to cancel.
USE POWDER
FILL POWDER
READY
This chapter will give instructions on program setting.
Maintenance setting
Please read the detailed instructions about rinsing the brewing unit and decalcifying on P12 and P14.
long
10
Beverage setting
This chapter will instruct you how to set beverages. The setting parameters include coffee strength, volume of coffee, temperature of hot water, volume of hot water, time of making hot milk, time of making hot cream.
The parameters accomplished by beverage setting will be the default values for each beverage.
Drinks
Volume: 25 - 240MLlong coffee
cappuccino Volume: 25 - 240ML Milk time: 3 - 120SEC Cream tiem: 3 - 120SECcoffee Latte
hot milk Milk time: 3 -120SEC
hot water
Volume: 25 -450ML
Strength Volume
The parameters as strength, volume, temperature and time can be set for the beverages bellow.
Please read the following table for the detail setting parameters and adjustment range
Temperature Setting
1 .Low 2 .Middle 3 .High
The default temperature is middle, and it’s only workable for coffee not milk.
11
Automatic switch-off
Reset
Information In this program you can view the information on numbers of produced each drinks, total drinks numbers, and maintenance times. 1. Total numbers on produced drinks 2. Numbers of produced espresso 3. Numbers of produced long coffee 4. Numbers of produced hot water 5. Numbers of produced cappuccino 6. Numbers of produced coffee Latte 7. Numbers of produced coffee by coffee powder 8. Numbers of produced hot milk 9. Numbers of produced cream 10. Numbers of rinsing operations 11. Numbers of rinsing brewing unit operations 12. Numbers of decalcifying operations 13. Numbers of installing and replacing the water filter 14. Numbers of rinsing milk unit
You can set your preferred language on the coffee machine.
EXIT
After entering the program setting, please turn the rotary button to the “EXIT” option. Then press the rotary button. After completing setting, the machine will return to “READY” .
Program setting
12
Cleaning the coffee machine before operation This chapter will instruct you how to clean and maintain the coffee machine.
Before making coffee, press the cleaning button before the cleaning light is on. It will pre-heat the brewing unit and inner pipeline, to improve the taste of the coffee next time.
Cleaning function must be processed in “READY” status.
CLEANING
READY
When the coffee machine is in “READY” status and the cleaning indicator light is not on, press the cleaning button to start cleaning the brewing unit and coffee spout.
The process of cleaning coffee machine cannot be interrupted, and it will automatically return to “READY” status after cleaning.
Cleaning brewing unit
MAINTENANCE
After entering the program settings, turn the rotary button to the "MAINTENANCE" option, and press the rotary button.
CLEAN BREW UNIT
When the screen shows the picture as left, it indicates cleaning brewing unit program has been selected. Press the cleaning button to start cleaning brewing unit.
READY
CLEANING
13
PRESS RINSE
CLOSE COVER
Open the coffee powder container lid, add the cleaning tablet.
Close the coffee powder container lid, press the cleaning button to start it.
When screen displays as the left picture, please press the cleaning button to clean the brew unit.
Brew unit is under cleaning.
After cleaning finished, the machine enters into “READY” status.
Enter program setting, Turn the rotary button to “MAINTENANCE” page and pressed on.
When showing left picture in the display, it is in unit cleaning, press to start.
Cleaning and maintenance
Remove the milk pipe from the milk box/container and insert to the hole of the drip tray grid according to the display. Press rinse button to rinse milk unit.
REMOVE MILK PIPE
PRESS RINSE
Please empty the drip tray after the cleaning program is completed.
14
2
1
Milk unit is cleaning. After cleaning finished, the machine enters into “READY” status.
Descaling the coffee machine
The daily usage will cause calcareous deposited in coffee machine. The depositing rate varies with the local water hardness. Decalcifier contains acidic substances that would stimulate your eyes and skin, so you must strictly comply with the security warnings noted by manufacturer on the packaging. If you have contacted it with your eyes or skin by accident, please wash it with clean water immediately.
NEED DESCALE
PRESS RINSE
After a centain time use, if it reaches the degree of descaling, “NEEDS DESCALE"and" PRESS RINSE " will automatically display on the screen alternately. Now, press the cleaning button to enter the descaling program.
30 MINS
PRESS RINSE
MAINTENANCE
DESCALE
Turn the rotary button to maintenance setting option, press rotary button to enter.
Turn the rotary button to descaling option, press rotary button to enter.
After entering the descaling program, press cleaning button to start the descaling program; it will take 25 minutes.
Cleaning and maintenance
RINSE MILK UNIT
Please empty the drip tray after the cleaning program is completed.
15
7
4
5
6
DECALCIFYING
Cleaning and maintenance
Take a bag of decalcifier and sufficiently dissolves it in clean water, then put this mixed liquid to the water tank, and reinstall the water tank to coffee machine.
After adding decalcifier, press cleaning button to start descaling and cleaning.
To start descaling and cleaning for the first time, put a container, of which the capacity is more than 1L, under the coffee spout.
After descaling and cleaning for the first time, take the water tank out, empty the rest water and clean it. Add purified water again, and reinstall it to the coffee machine
Press cleaning button to enter descaling and cleaning for the second time. To clean the residual decalcifierin water in pipes at this time . Put a container, of which the capacity is more than 1L, under the coffee spout.
Decalcifying.
READY
When the screen shows “READY”, it indicates
the descaling is completed; Now, you can continue to make coffee.
Please empty the drip tray after the cleaning program is completed.
EMPTY TRAY
INSTALL TRAY
Install tray.
Empty tray.
READY
READY
EMPTY GROUNDS
INSTALL TRAY
EMPTY TRAY
Do not use chemical solvents and erosive cleaner or alcohol to clean the coffee grounds container and drip tray. The drip tray and coffee grounds container cannot be cleaned in dishwasher. Do not use metal objects to clean dirt or coffee precipitate to avoid scraping the drip tray and coffee grounds container.
When it cumulates to 15 cups, it will automatically indicate “EMPTY GROUNDS”.
When it shows “INSTALL TRAY “, please remove coffee grounds of the drip tray and coffee grounds container. This will take more than3 seconds.
Reinstall the water drip tray to the machine, it returns to “READY” status. You can continue using the machine.
If the drip tray is full, the machine will automatically indicate"EMPTY TRAY". Take out the water drip tray and pour the waste water.
After clearing the waste water, reinstall the drip tray to the coffee machine, it returns to “READY” status. You can continue using the machine.
INSTALL TRAY
Cleaning and maintenance
Cleaning water tank
Cleaning bean container
Disassembling and cleaning the milk frother
In order to guarantee the fine and smooth milk foam, please clean the milk frother every day.
1. Carefully take off the milk frother. 2. Disassemble each part of the milk frother thoroughly. 3. Wash the parts with running water. 4. Reassemble the milk frother, and install it to the coffee machine. Then the milk frother cleaning is completed.
Cleaning milk pipe
In order to keep milk pipe clean, please clean it every day.
1. Take off milk pipe carefully. 2. Clean milk pipe in running water.
Installing milk pipe
18
Cleaning coffee machine
The coffee temperature is too low.
Coffee only comes out from the coffee spout drop by drop.
Insufficient coffee oil.
The coffee cup was not pre-heated. Wash the coffee cup with hot water before making coffee.
Make some more cups of coffee.
Adjust the grinding wheel to a rough state or use the suitable coffee powder.
Run the brewing unit washing program.
Use the suitable coffee beans.
Several minutes have passed since the last time of coffee making , so the brewing unit and the internal pipes are already cold.
Over fine coffee powder or coffee bean has been grounded too fine.
Brewing unit filter was blocked.
Picked the wrong coffee bean type.
Screen always indicates "EMPTY TRAY". Wipe the sheetmetals to dry ( refer to P16).The sheetmetals at the end of the drip
tray are dirty or wet.
Screen always indicates "INSTALL TRAY". Clean the coffee grounds in the bottom.Coffee grounds in the bottom of the machine are not cleaned.
Screen always indicates “FILL WATER TANK”, but the water tank is full. Clean the water tank ( refer to P17).The water tank inductor is trapped.
Screen always indicates “FILL BEANS”, but the bean container is full.
1. Stir coffee beans in bean container. 2. Observe if the coffee beans are over roasted or charcoal roasted. 3. Clean the beans container ( refer to P17).
The bean container is too oily and sticky for coffee beans.
“Errors 1 to 7”is displayed. 1. Restart coffee machine. 2. If “errors” still exists, switch off the main power, and contact with the customer sevice center.
The coffee machine failures, cannot continue to be used.
Milk sprays from the milk frother. Reassemble the milk frother. The milk frother was not assembled correctly.
The milk frother cannot make any milk foam. Cleaning the milk frother ( refer to P17).The milk frother is blocked.
The grinder arising noises. Make coffee again, if it still failures, please contact with the customer sevice center.
There are foreign objects in the grinder.
FILL BEANS
FILL POWDER
INSTALL TRAY
UNIT EMPTY
TEMPERATURE HIGH
TEMPERATURE LOW
ERROR 1
PRESSURE HIGH
Display information
Causes Solutions
If the water drip tray is full, any function of making beverage will be out of service.
Take the drip tray out, empty the waste water in the drip tray and reinstall it to the machine.
If the coffee grounds container is full, any function of making beverage will be out of service.
Take the coffee grounds container out, empty the coffee grounds container and reinstall it.
If water in the water tank is used up, any function of making beverage will be out of service.
Fill the water tank with water.
If coffee beans in the bean container are used up, function of making coffee will be out of service.
Add beans into bean container, and press the rotary button to release.
There is not enough coffee powder in the powder container.
Next time when making coffee with coffee powder, please put a full spoon of powder.
The drip tray is not installed correctly; any function is out of service.
Install the drip tray correctly.
The water in the pipe inside the machine is not enough; any function is out of service.
Press the rotary button to release, to run the water replenishing system.
Temperature of the machine is too high, the machine cannot be used.
Power off the main power, and use it 1 hour later.
Temperature of the machine is too low, the machine cannot be used.
Increase environmental temperature to above 10.
The coffee machine failures, may not be able to be used.
1. Power off, restarting up 2. If still unresolved, please pull out the plug. Contact with customer sevice center.
1. Using dark roasted coffee beans or over fine coffee powder; 2. The filter of the brewer is clogged.
1. Adjust grinder wheel to rougher; 2. Start brewer cleaning procedure(refer to P12).
Dispenser valve is blocked. Restart coffee machine.
20 EMPTY UNIT
FILL WATER TANK
READY
The machine is on the status of “READY”.
Take out the water tank, and the machine indicates “FILL WATER TANK”.
long pressing the cleaning button until the screen shows "EMPTY UNIT", the machine begins to clean up the waterway automatically, and steam will spray from the coffee spout, please keep distance to avoid scalding.
After emptying the waterway, the machine will automatically power off. Take the drip tray out after the power is switched off, and clear the water in the drip tray.
EMPTY UNIT
Recycle When recycling the machine, some inner parts can be recycled to use again. Please pay attention to recycle them for environmental protection.
Voltage/Frequency 220 - 240 V~ 50 Hz /60 Hz
Power 1400 W
Capacity of coffee grounds container 15 cakes
Capacity of the brewing unit 7 - 14 g
Adjusting height of coffee spout 80 - 140 mm
Length of power cord 1.2 m
Net weight 13 kg
Technical Data
User Manual.pdf
Water tank lid
Espresso icon
Precautions
Please see specification label on the bottom of coffee machine or technical date indicated in instruction manual(P20).
Please do not contact with heat parts of coffee machine to avoid scalding.
To avoid operator’s injury caused by burn, electric shock or other unexpected reasons, please do not contact the power cord, plug, and main body with water.
This appliance can be used by children aged from 8 years and above if they have been given super- vision or instruction concerning use of the appli- ance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years. Children shall not play with the appliance. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
02
Warnings
Prohibitions
Never disassemble and repair the machine without authorization. If there is any error, please send it to authorized service center for repairing.
Except for cleaning and daily maintenance to coffee machine, if it fails to work please send it to authorized after-sale service center for repairing, or contact with customer service for after-sale services.
Never immerse the machine into water, and do not put the machine near the water tap or water tank. Never disassemble coffee machine without authorization, for any maintenance
Safety Instructions
If the coffee machine is damaged because of the situation that has been warned above, it is not covered in the warranty!
needs disassembling the machine,please return it to Service Centre or
cocoa
03
Proper operation
Safety Tips
To guarantee the coffee taste, make sure that temperature of the water filled into the water tank is at 25 or so. Coffee machine can only be used for preparing coffee, hot milk, milk foam, and hot water. Do not use it for any other intended use. We will not take any responsibility for the consequences of improper use. Please carefully read all the contents of this manual, so that you can know the coffee machine sufficiently.
Please keep this manual properly for looking up at any time.
Please notice the following tips to avoid personal injury from electric shock.
Symbol description
Reading this manual will help you be familiar with the coffee machine, and use it properly. “Instructions for first-time use " introduces the operation process of coffee machine step-by-step, for first time use. “failures handling" will provide information when encountering problems.
This Manual is only applicable to the coffee machine of QUARZA series and the model KLM1601W, KLM1601B, KLM1601S, KLM1601R..
Non-compliance with the operation, may cause electric shock, and threat to life.
Non-compliance with the operation may cause Coffee machine damaged, or personal injury.
Non-compliance with the operation, may cause scalded or burn injury.
This symbol, if prompted, please carefully read it.
This symbol, if prompted, represents recycle.
04
05
18
19
20
20
05
01
03
03
9
12
17
17
Instructions for use Coffee machine model Symbol description
Instructions for first time use Power connection Fill water tank Fill beans Grinding wheel Power on Power off
Making beverages Preparing coffee by touch icon Single time setting of coffee parameters Preparing coffee with coffee powder
Program setting Maintenance setting Setting beverage parameters and range Temperature setting Energy-saving setting Automatic switch off Reset Information Language Exit
Cleaning and maintenance Cleaning the coffee machine before operation Cleaning brewing unit Rinsing milk unit Descaling the coffee machine Cleaning coffee grounds container and drip tray Cleaning water tank Cleaning bean container Disassembling and cleaning the milk frother Installing milk pipe Cleaning milk pipe Cleaning coffee machine
Transport and recycle
Instructions for first-time use
This chapter will help you understand the basic operations and settings for your first time use
Power connection
Fill water tank
Only purified water at room temperature is allowed to fill in the water tank, never fill any other liquid (e.g. warm water, hot water, milk). It will damage coffee machine. In order to ensure the taste of coffee, it is recommended to use water at 25 or so. Low temperature water will not make a good taste.
Fill beans
Never put the coffee beans that have been specially treated (e.g. sugar, cocoa) into the bean container.
Only roasted coffee beans can be put into the bean container, never put others like rice, soybeans, chocolate beans, nuts, sugar, and spices. Never put hard objects into the bean container, otherwise it will damage the grinder. The bean container cover playing a role as seal. It keeps the aroma of coffee beans maximally. Please do not lose the cover.
Don't fill the liquid in the bean container.
Grinding wheel
Please adjust the fineness of coffee bean powder according to the coffee beans.
Power on
As the machine has been tested at factory, there may be a little coffee powder left . We promise the machine is brand new.
Every time powering on the coffee machine, it will automatically complete heating and cleaning for one time, and the process cannot be stopped. The coffee machine can only be used after finished the above cycle process.
During the cleaning process, some hot water may flow out of the coffee spout into the drip tray. Please avoid contacting the spilling hot water.
READY
Every time when powering off the coffee machine, it will automatically complete cleaning process for one time, and the process cannot be stopped. This operation is to clean up the coffee pipelines and remove the coffee grounds.
During the cleaning process, some hot water will flow out of the coffee spout into the drip tray. Avoid touching spilt hot water, so as not to be burned.
Only after using milk/cream/cappuccino/lattee, the Rinse Milk Unit function will be operated when power off.
When you press power button, the machine will be
power off after auto cleaning.
READY
This chapter instructs you making various kinds of coffee, hot water, hot milk and milk foam by this coffee machine. Please read the following instructions carefully to help you make high-quality beverages.
The temperature of the hot water is high, please do not touch it to avoid being scalded.
Before we make all kinds of coffee, please ensure “READY” is indicated on the display.
STRONG
ENJOY !
ESPRESSO
The volume of espresso is suggested between 30 to 50ml. Because of the small volume of espresso, please warm the coffee cup before making coffee.
Touch the espresso icon for espresso function.
the grinder will begin to grind . At this time you can adjust the amount of coffee beans by rotating the rotary button. Default amount of coffee beans for espresso:
During making coffee, you can adjust the volume of coffee by rotating the rotary button. Default volume of espresso: 50ML
When the screen shows as the left picture, it means the espresso is ready, please enjoy it.
READY
ESPRESSO
You can make 4 kinds of coffee by touch icons, when the screen shows “READY”
Take espresso for example to explain how to make coffee by touch icons.
08
Single time setting of coffee parameters
When grinding the coffee beans, you can rotate the rotary button to adjust the amount of coffee beans, to left is mild , and to right is strong . The default amount is normal .
Detail instructions
VOLUME 60ML
CREAM 30S
MILK 30S
VOLUME 40ML
8 items as bellow can be set at single time.
You can set the fineness of coffee and the volume of beverage before or during making the beverage at single time, the setting will not be saved.
Before making hot water, the temperature can be adjusted by rotating the rotary button. To left is low, to right is high. The default temperature is normal.
When making hot water, the hot water volume can be adjusted by rotating the rotary button. For example, the current volume is 150ML, 2 cells to left to reduce to 145ML, and 2 cells to right to increase to 155ML.
When making cappuccino, milk foam or coffee latte,cream making time can be adjusted by rotating the rotary button while milk foam outflows. For example,the current time is 20s,2 cells to left to reduce to 19S, and 2 cells to right to increase to 21S.
When making hot milk or coffee latte, milk making time can be adjusted by rotating the rotary button. For example, the current milk making time is 20S, 2 cells to left to reduce to 19S, and 2 cells to right to increase to 21S.
When making coffee, coffee volume can be adjusted by rotary button. For example, the current volume is 100ml, 2 cells to left to reduce to 95ml, and 2 cells to right to increase to 105ml.
Making beverages
Preparing coffee with coffee powder
You can choose this function if you want to make coffee with coffee powder.
Prohibit filling other mixtures such as instant coffee powder or cocoa powder in the powder container. Otherwise it will damage the machine.
Do not fill the coffee powder into the coffee bean container, otherwise, it will damage the machine.
Do not rinse the powder container with water, or it will result in operator’s injury by electric shock.
Please use proper grounded coffee powder for espresso.
Only 7-14g coffee powder can be added. Machine will be damaged with more powder.
Making beverages
Long press rotary button to enter into setting when the coffee machine is “READY”.
Display shows “USE POWDER” page after entered into setting. Press rotary button to make coffee.
Open powder container cover and fill the coffee powder, then close cover. Touch the beverage icon you need to make coffee. Press rotary button to cancel.
USE POWDER
FILL POWDER
READY
This chapter will give instructions on program setting.
Maintenance setting
Please read the detailed instructions about rinsing the brewing unit and decalcifying on P12 and P14.
long
10
Beverage setting
This chapter will instruct you how to set beverages. The setting parameters include coffee strength, volume of coffee, temperature of hot water, volume of hot water, time of making hot milk, time of making hot cream.
The parameters accomplished by beverage setting will be the default values for each beverage.
Drinks
Volume: 25 - 240MLlong coffee
cappuccino Volume: 25 - 240ML Milk time: 3 - 120SEC Cream tiem: 3 - 120SECcoffee Latte
hot milk Milk time: 3 -120SEC
hot water
Volume: 25 -450ML
Strength Volume
The parameters as strength, volume, temperature and time can be set for the beverages bellow.
Please read the following table for the detail setting parameters and adjustment range
Temperature Setting
1 .Low 2 .Middle 3 .High
The default temperature is middle, and it’s only workable for coffee not milk.
11
Automatic switch-off
Reset
Information In this program you can view the information on numbers of produced each drinks, total drinks numbers, and maintenance times. 1. Total numbers on produced drinks 2. Numbers of produced espresso 3. Numbers of produced long coffee 4. Numbers of produced hot water 5. Numbers of produced cappuccino 6. Numbers of produced coffee Latte 7. Numbers of produced coffee by coffee powder 8. Numbers of produced hot milk 9. Numbers of produced cream 10. Numbers of rinsing operations 11. Numbers of rinsing brewing unit operations 12. Numbers of decalcifying operations 13. Numbers of installing and replacing the water filter 14. Numbers of rinsing milk unit
You can set your preferred language on the coffee machine.
EXIT
After entering the program setting, please turn the rotary button to the “EXIT” option. Then press the rotary button. After completing setting, the machine will return to “READY” .
Program setting
12
Cleaning the coffee machine before operation This chapter will instruct you how to clean and maintain the coffee machine.
Before making coffee, press the cleaning button before the cleaning light is on. It will pre-heat the brewing unit and inner pipeline, to improve the taste of the coffee next time.
Cleaning function must be processed in “READY” status.
CLEANING
READY
When the coffee machine is in “READY” status and the cleaning indicator light is not on, press the cleaning button to start cleaning the brewing unit and coffee spout.
The process of cleaning coffee machine cannot be interrupted, and it will automatically return to “READY” status after cleaning.
Cleaning brewing unit
MAINTENANCE
After entering the program settings, turn the rotary button to the "MAINTENANCE" option, and press the rotary button.
CLEAN BREW UNIT
When the screen shows the picture as left, it indicates cleaning brewing unit program has been selected. Press the cleaning button to start cleaning brewing unit.
READY
CLEANING
13
PRESS RINSE
CLOSE COVER
Open the coffee powder container lid, add the cleaning tablet.
Close the coffee powder container lid, press the cleaning button to start it.
When screen displays as the left picture, please press the cleaning button to clean the brew unit.
Brew unit is under cleaning.
After cleaning finished, the machine enters into “READY” status.
Enter program setting, Turn the rotary button to “MAINTENANCE” page and pressed on.
When showing left picture in the display, it is in unit cleaning, press to start.
Cleaning and maintenance
Remove the milk pipe from the milk box/container and insert to the hole of the drip tray grid according to the display. Press rinse button to rinse milk unit.
REMOVE MILK PIPE
PRESS RINSE
Please empty the drip tray after the cleaning program is completed.
14
2
1
Milk unit is cleaning. After cleaning finished, the machine enters into “READY” status.
Descaling the coffee machine
The daily usage will cause calcareous deposited in coffee machine. The depositing rate varies with the local water hardness. Decalcifier contains acidic substances that would stimulate your eyes and skin, so you must strictly comply with the security warnings noted by manufacturer on the packaging. If you have contacted it with your eyes or skin by accident, please wash it with clean water immediately.
NEED DESCALE
PRESS RINSE
After a centain time use, if it reaches the degree of descaling, “NEEDS DESCALE"and" PRESS RINSE " will automatically display on the screen alternately. Now, press the cleaning button to enter the descaling program.
30 MINS
PRESS RINSE
MAINTENANCE
DESCALE
Turn the rotary button to maintenance setting option, press rotary button to enter.
Turn the rotary button to descaling option, press rotary button to enter.
After entering the descaling program, press cleaning button to start the descaling program; it will take 25 minutes.
Cleaning and maintenance
RINSE MILK UNIT
Please empty the drip tray after the cleaning program is completed.
15
7
4
5
6
DECALCIFYING
Cleaning and maintenance
Take a bag of decalcifier and sufficiently dissolves it in clean water, then put this mixed liquid to the water tank, and reinstall the water tank to coffee machine.
After adding decalcifier, press cleaning button to start descaling and cleaning.
To start descaling and cleaning for the first time, put a container, of which the capacity is more than 1L, under the coffee spout.
After descaling and cleaning for the first time, take the water tank out, empty the rest water and clean it. Add purified water again, and reinstall it to the coffee machine
Press cleaning button to enter descaling and cleaning for the second time. To clean the residual decalcifierin water in pipes at this time . Put a container, of which the capacity is more than 1L, under the coffee spout.
Decalcifying.
READY
When the screen shows “READY”, it indicates
the descaling is completed; Now, you can continue to make coffee.
Please empty the drip tray after the cleaning program is completed.
EMPTY TRAY
INSTALL TRAY
Install tray.
Empty tray.
READY
READY
EMPTY GROUNDS
INSTALL TRAY
EMPTY TRAY
Do not use chemical solvents and erosive cleaner or alcohol to clean the coffee grounds container and drip tray. The drip tray and coffee grounds container cannot be cleaned in dishwasher. Do not use metal objects to clean dirt or coffee precipitate to avoid scraping the drip tray and coffee grounds container.
When it cumulates to 15 cups, it will automatically indicate “EMPTY GROUNDS”.
When it shows “INSTALL TRAY “, please remove coffee grounds of the drip tray and coffee grounds container. This will take more than3 seconds.
Reinstall the water drip tray to the machine, it returns to “READY” status. You can continue using the machine.
If the drip tray is full, the machine will automatically indicate"EMPTY TRAY". Take out the water drip tray and pour the waste water.
After clearing the waste water, reinstall the drip tray to the coffee machine, it returns to “READY” status. You can continue using the machine.
INSTALL TRAY
Cleaning and maintenance
Cleaning water tank
Cleaning bean container
Disassembling and cleaning the milk frother
In order to guarantee the fine and smooth milk foam, please clean the milk frother every day.
1. Carefully take off the milk frother. 2. Disassemble each part of the milk frother thoroughly. 3. Wash the parts with running water. 4. Reassemble the milk frother, and install it to the coffee machine. Then the milk frother cleaning is completed.
Cleaning milk pipe
In order to keep milk pipe clean, please clean it every day.
1. Take off milk pipe carefully. 2. Clean milk pipe in running water.
Installing milk pipe
18
Cleaning coffee machine
The coffee temperature is too low.
Coffee only comes out from the coffee spout drop by drop.
Insufficient coffee oil.
The coffee cup was not pre-heated. Wash the coffee cup with hot water before making coffee.
Make some more cups of coffee.
Adjust the grinding wheel to a rough state or use the suitable coffee powder.
Run the brewing unit washing program.
Use the suitable coffee beans.
Several minutes have passed since the last time of coffee making , so the brewing unit and the internal pipes are already cold.
Over fine coffee powder or coffee bean has been grounded too fine.
Brewing unit filter was blocked.
Picked the wrong coffee bean type.
Screen always indicates "EMPTY TRAY". Wipe the sheetmetals to dry ( refer to P16).The sheetmetals at the end of the drip
tray are dirty or wet.
Screen always indicates "INSTALL TRAY". Clean the coffee grounds in the bottom.Coffee grounds in the bottom of the machine are not cleaned.
Screen always indicates “FILL WATER TANK”, but the water tank is full. Clean the water tank ( refer to P17).The water tank inductor is trapped.
Screen always indicates “FILL BEANS”, but the bean container is full.
1. Stir coffee beans in bean container. 2. Observe if the coffee beans are over roasted or charcoal roasted. 3. Clean the beans container ( refer to P17).
The bean container is too oily and sticky for coffee beans.
“Errors 1 to 7”is displayed. 1. Restart coffee machine. 2. If “errors” still exists, switch off the main power, and contact with the customer sevice center.
The coffee machine failures, cannot continue to be used.
Milk sprays from the milk frother. Reassemble the milk frother. The milk frother was not assembled correctly.
The milk frother cannot make any milk foam. Cleaning the milk frother ( refer to P17).The milk frother is blocked.
The grinder arising noises. Make coffee again, if it still failures, please contact with the customer sevice center.
There are foreign objects in the grinder.
FILL BEANS
FILL POWDER
INSTALL TRAY
UNIT EMPTY
TEMPERATURE HIGH
TEMPERATURE LOW
ERROR 1
PRESSURE HIGH
Display information
Causes Solutions
If the water drip tray is full, any function of making beverage will be out of service.
Take the drip tray out, empty the waste water in the drip tray and reinstall it to the machine.
If the coffee grounds container is full, any function of making beverage will be out of service.
Take the coffee grounds container out, empty the coffee grounds container and reinstall it.
If water in the water tank is used up, any function of making beverage will be out of service.
Fill the water tank with water.
If coffee beans in the bean container are used up, function of making coffee will be out of service.
Add beans into bean container, and press the rotary button to release.
There is not enough coffee powder in the powder container.
Next time when making coffee with coffee powder, please put a full spoon of powder.
The drip tray is not installed correctly; any function is out of service.
Install the drip tray correctly.
The water in the pipe inside the machine is not enough; any function is out of service.
Press the rotary button to release, to run the water replenishing system.
Temperature of the machine is too high, the machine cannot be used.
Power off the main power, and use it 1 hour later.
Temperature of the machine is too low, the machine cannot be used.
Increase environmental temperature to above 10.
The coffee machine failures, may not be able to be used.
1. Power off, restarting up 2. If still unresolved, please pull out the plug. Contact with customer sevice center.
1. Using dark roasted coffee beans or over fine coffee powder; 2. The filter of the brewer is clogged.
1. Adjust grinder wheel to rougher; 2. Start brewer cleaning procedure(refer to P12).
Dispenser valve is blocked. Restart coffee machine.
20 EMPTY UNIT
FILL WATER TANK
READY
The machine is on the status of “READY”.
Take out the water tank, and the machine indicates “FILL WATER TANK”.
long pressing the cleaning button until the screen shows "EMPTY UNIT", the machine begins to clean up the waterway automatically, and steam will spray from the coffee spout, please keep distance to avoid scalding.
After emptying the waterway, the machine will automatically power off. Take the drip tray out after the power is switched off, and clear the water in the drip tray.
EMPTY UNIT
Recycle When recycling the machine, some inner parts can be recycled to use again. Please pay attention to recycle them for environmental protection.
Voltage/Frequency 220 - 240 V~ 50 Hz /60 Hz
Power 1400 W
Capacity of coffee grounds container 15 cakes
Capacity of the brewing unit 7 - 14 g
Adjusting height of coffee spout 80 - 140 mm
Length of power cord 1.2 m
Net weight 13 kg
Technical Data
User Manual.pdf
