Full Range For 2012/2013 Professional - CARiD.com · Laser glasses (1 608 M00 7N5) 3 2 magnetic...
Transcript of Full Range For 2012/2013 Professional - CARiD.com · Laser glasses (1 608 M00 7N5) 3 2 magnetic...
Robert Bosch LimitedMarketing CST/berger
PO Box 98 UxbridgeMiddlesex, UB9 5HNUnited Kingdom
1619EA6617 – EN – Printed in the Federal Republic of Germany – Subject to technical alterations. No liability is accepted for printing errors.
Full Range For 2012/2013Professional Measuring Technology
Rotation lasers
1
2
3
4
5
6
2 | Table of contents
Table of contents
4 Symbols4 Product index
5 Rotation lasers6 Rotation lasers15 Rotation laser receivers18 Accessories for rotation lasers
20 Pipe laser21 Pipe laser22 Accessories for pipe laser
23 Line lasers24 Line lasers30 Line laser receivers31 Accessories for line lasers
32 Point lasers33 Point lasers
34 Total stations35 Total stations36 Accessories for total stations
39 Theodolites40 Theodolites40 Accessories for theodolites
7
9
8
10
11
12
13
Table of contents | 3
Table of contents
41 Optical levels42 Optical levels
47 Measuring wheels48 Measuring wheels
45 Laser rangefinders46 Laser rangefinders
50 Magnetic locators51 Magnetic locators
53 Tripods54 Tripods59 Tripod accessories
60 Staffs and “cut & fill” rods61 Staffs and “cut & fill” rods62 Accessories for staffs and “cut & fill” rods
63 Accessories64 Prism poles65 Accessories for poles65 Adapters
4 | Symbols and product index
Sym
bols
and
pro
duct
inde
x
Scanning Mode with Preset Angles
Clockwise and Anti Clockwise Rotation Head Drive
Automatic/Manual ModeVariable Rotation Speed
Anti-Drift System Plumb Beam
0–961 06-804M61 06-805M61 06-805MII61 06-907M62 06-TLMB48 32-401M48 32-416M
A56 ALELT206 ALGRD12 ALH9 ALHV9 ALHVD8 ALHVG8 ALHVGD54 ALQCI20-B54 ALQCI40-B55 ALQRI10-ELAZ56 ALQRI20-ELAZ55 ALQRI20-B
C35 CST302R35 CST305R
D40 DGT1040 DGT2
F57 FGHD20
G24 GIZLT-3
R22 RC2018 RC400X18 RC70017 RD546 RF2546 RF511 RL25H Set7 RL25HV7 RL25HV Set18 RM749 RT312M49 RT412D
S43 SAL20ND43 SAL20NG43 SAL24ND43 SAL24NG44 SAL28ND44 SAL28NG44 SAL32ND44 SAL32NG
W58 WDW20HV-ON
X30 XLD227 XLP3427 XLP34PKG33 XP5
I24 ILMXL25 ILMXT25 ILMXTE26 ILMXTG
L31 LD315 LD40015 LD44016 LD440G16 LD50017 LD9029 LL2030 LLD2028 LM210 LM800DPI13 LM800GR14 LMH-CU21 LMPL2058 LP12-UM
M51 Magna-Trak 10051 Magna-Trak 10252 Magna-Trak 20052 Magna-Trak 20257 MCTE-ELAZ2033 MP3
P42 PAL22D42 PAL22G42 PAL26D42 PAL26G
Product index
Symbols
Rot
atio
n la
sers
: Gra
de la
ser
1
6 | Rotation lasers
ALGRD
Electronic self-levelling rotation laser with plumb beam – dual-grade capable in both horizontal and vertical positions
� Digital display for exact setting of grades � Dual-grade capability of ± 10% in both horizontal and vertical positions using keypad and remote control � Exceptionally high accuracy, long range, robust and waterproof
Additional features � Plumb beam � Clearly visible laser beam � Plumb function in horizontal and vertical modes � Anti-Drift System � Handle can be used in the ‘laydown’ position for vertical applications � Manual grade capability of ± 10% using keypad
Applications � Civil engineering � Landscaping � Elevation marking, bricklaying, transferring heights � Suspended ceiling installation � Drywall installation
� Transferring right angles and alignment � Setting up batter boards
Technical specifications ALGRD
Part number F 034 061 EN0Laser diode 635 nmLaser class 2MWorking range with laser receiver 425 m (radius)
Accuracy± 0.05 mm/m horizontal ± 0.1 mm/m vertical
Self-levelling range ± 5° Dust and splash protection IP67Rotation speed 0–1000 rpm
Power supply4 x 1.5 V LR20 (D)1 or 4 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.)Non-rechargeable batteries 60 h1 Rechargeable batteries (NiMH) 30 h
Tripod connection 5/8"Length 160 mmWidth 160 mmHeight 215 mmWeight 2.7 kg
Scope of delivery
LD440 laser receiver with bracket (F 034 069 100) 3
RC400X remote control (F 034 069 AN7) 3
1 x NiMH battery pack (1 608 M00 1NA) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
4 x 1.5 V LR6 (AA) 3
Hard carry case (1 608 M00 05M) 3
1 can only be used together with a non-rechargeable battery holder (1 608 M00 05R)
1
Rotation lasers | 7
Rot
atio
n la
sers
: Hor
izon
tal a
nd v
erti
cal l
aser
RL25HV, RL25HV Set
The robust solution for precise outdoor levelling with single-slope capability
� Self-levelling: horizontal and vertical � Robust design to protect against vibrations and falls � High precision and long range for outdoor applications
Additional features � Efficient protection against dust and splash water � Suitable for slopes of ± 8% to enable more versatility on the jobsite � User-friendly keypad design
Applications � Excavation, structural work, formwork � Elevation marking, bricklaying, transferring heights � Façade design � Installing partition walls � Interior fitting work
� Landscaping � Screeding � Alignment in terrain
Technical specifications RL25HV, RL25HV Set
Part number F 034 061 0N6, F 034 061 0N5Laser diode 635 nmLaser class 2Working range with laser receiver 225 m (radius)
Accuracy± 0.08 mm/m horizontal± 0.08 mm/m vertical
Self-levelling range ± 5° Dust and splash protection IP56Rotation speed 0, 150, 300, 600 rpm
Power supply3 x 1.5 V LR20 (D) or 2 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.)Non-rechargeable batteries 55 hRechargeable batteries (NiMH) 30 h
Tripod connection 5/8"Length 200 mmWidth 220 mmHeight 190 mmWeight 2.3 kg
Scope of delivery
RD5 laser receiver with bracket (F 034 069 0N9) 31
RM7 remote control (F 034 069 0N1) 3
Laser glasses 3
Magnetic targets 3
V-Mount 3
Alkaline Tray (1 608 M00 9N0) 31
NMB1 (1 608 M00 1N0) 3
CHNM1 charger with EU/UK power cable (1 608 M00 2N2) 3
Hard carry case (1 608 M00 0N0) 3
1 only with RL25HV Set
Rot
atio
n la
sers
: Hor
izon
tal a
nd v
erti
cal l
aser
1
8 | Rotation lasers
ALHVG, ALHVGD
Electronic self-levelling rotation laser with green beam – with plumb beam, dual-slope capable in both horizontal and vertical positions
� Exceptionally high visibility due to green laser beam � Exceptionally high accuracy, long range, robust and waterproof � Dual-slope capable in both horizontal and vertical positions
Additional features � Plumb beam � Anti-Drift System � Axis alignment in vertical mode using keypad and remote control � Plumb function in horizontal and vertical modes � Cross-axis levelling � Manual slope capability of ± 10% using keypad
Applications � Civil engineering � Landscaping � Interior fitting work � Elevation marking, bricklaying, transferring heights � Suspended ceiling installation � Drywall installation
� Transferring right angles and alignment � Setting up batter boards
Technical specifications ALHVG, ALHVGD
Part number F 034 061 BN9, F 034 061 BN8Laser diode 532 nmLaser class 3RWorking range with laser receiver 200 m (radius)
Accuracy± 0.05 mm/m horizontal ± 0.1 mm/m vertical
Self-levelling range ± 5° Dust and splash protection IP67Rotation speed 150, 300, 600 rpm
Power supply4 x 1.5 V LR20 (D)1 or 4 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.) 15 h1
Tripod connection 5/8"Length 160 mmWidth 160 mmHeight 215 mmWeight 2.5 kg
Scope of delivery
LD440G laser receiver with bracket (F 034 069 1N1) 33
RC700 remote control (F 034 069 A00) 3
Laser glasses (1 608 M00 7N6) 3
2 magnetic targets (1 608 M00 8NC) 3
V-Mount (F 034 092 CN2) 3
1 x NiMH battery pack (1 608 M00 1NA) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
2 x 1.5 V LR6 (AA) 32
4 x 1.5 V LR6 (AA) 33
Hard carry case (1 608 M00 05M) 3
1 can only be used together with a non-rechargeable battery holder (1 608 M00 05R)2 only with ALHVG3 only with ALHVGD
1
Rotation lasers | 9
Rot
atio
n la
sers
: Hor
izon
tal a
nd v
erti
cal l
aser
ALHV, ALHVD
Electronic self-levelling rotation laser with plumb beam – dual-slope capable in both horizontal and vertical positions
� Exceptionally high accuracy, long range, robust and waterproof � Axis alignment in vertical mode using keypad and remote control � Cross-axis levelling
Additional features � Plumb beam � Clearly visible laser beam � Plumb function in horizontal and vertical modes � Anti-Drift System � Handle can be used in the ‘laydown’ position for vertical applications � Manual slope capability of ± 10% using keypad
Applications � Civil engineering � Landscaping � Interior fitting work � Elevation marking, bricklaying, transferring heights � Suspended ceiling installation � Drywall installation
� Transferring right angles and alignment � Setting up batter boards
Technical specifications ALHV, ALHVD
Part number F 034 061 B00, F 034 061 B01Laser diode 635 nmLaser class 2MWorking range with laser receiver 425 m (radius)
Accuracy± 0.05 mm/m horizontal ± 0.1 mm/m vertical
Self-levelling range ± 5° Dust and splash protection IP67Rotation speed 150, 300, 600 rpm
Power supply4 x 1.5 V LR20 (D)1 or 4 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.)Non-rechargeable batteries 60 h1 batteries (NiMH) 30 h
Tripod connection 5/8"Length 160 mmWidth 160 mmHeight 215 mmWeight 2.5 kg
Scope of delivery
LD440 laser receiver with bracket (F 034 069 100) 33
RC700 remote control (F 034 069 A00) 3
Laser glasses (1 608 M00 7N5) 3
2 magnetic targets (1 608 M00 8NB) 3
V-Mount (F 034 092 CN2) 3
1 x NiMH battery pack (1 608 M00 1NA) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
2 x 1.5 V LR6 (AA) 32
4 x 1.5 V LR6 (AA) 33
Hard carry case (1 608 M00 05M) 3
1 can only be used together with a non-rechargeable battery holder (1 608 M00 05R)2 only with ALHV3 only with ALHVD
1
Rot
atio
n la
sers
: Hor
izon
tal a
nd v
erti
cal l
aser
10 | Rotation lasers
LM800DPI
Electronic self-levelling rotation laser with upward and downward plumb beam – dual-slope capable in both horizontal and vertical positions
� Dual-slope capable in both horizontal and vertical positions � Exceptionally high accuracy � Exceptionally long range
Additional features � Robust and waterproof � Plumb beam � Highly visible diode � Axis alignment in vertical mode using keypad and remote control � Plumb function in vertical and horizontal modes � Cross-axis levelling � Manual slope capability of ± 10% using keypad
Applications � Elevation marking, bricklaying, transferring heights � Interior fitting work � Suspended ceiling installation � Drywall installation � Structural work, formwork, screeding
� Transferring right angles � Alignment � Pits
Technical specifications LM800DPI
Part number F 034 061 9NELaser diode 635 nmLaser class 2MWorking range with laser receiver 425 m (radius)
Accuracy± 0.05 mm/m horizontal ± 0.1 mm/m vertical
Self-levelling range ± 5° Dust and splash protection IP55Rotation speed 150, 300, 600 rpm
Power supply1 x 7.2 V (2600 mAh) (NiMH batteries)
Operating time (max.) 15 hTripod connection 5/8"Length 159 mmWidth 162 mmHeight 203 mmWeight 2.5 kg
Scope of delivery
LD400 laser receiver with bracket (F 034 069 000) 3
RC700 remote control (F 034 069 A00) 3
Laser glasses (1 608 M00 7N5) 3
2 magnetic targets (1 608 M00 8NB) 3
V-Mount (F 034 092 CN2) 3
1 x NiMH battery pack (1 608 M00 1N9) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
2 x 1.5 V LR6 (AA) 3
1 x 9 V 6LR61 Block 3
Hard carry case (1 608 M00 05P) 3
Available until the end of 2012.
1
Rotation lasers | 11
Rot
atio
n la
sers
: Hor
izon
tal l
aser
RL25H Set
The robust solution for precise outdoor levelling
� Self-levelling: horizontal � Robust design to protect against vibrations and falls � High precision and long range for outdoor applications
Additional features � Efficient protection against dust and splash water � Manual single-slope capability of ± 8% to enable more versatility on the jobsite � User-friendly keypad design
Applications � Excavation, structural work, formwork � Elevation marking, bricklaying, transferring heights � Landscaping � Screeding � Alignment in terrain
Technical specifications RL25H Set
Part number F 034 061 0NELaser diode 635 nmLaser class 2Working range with laser receiver 225 m (radius)Accuracy ± 0.08 mm/m horizontalSelf-levelling range ± 5° Dust and splash protection IP56Rotation speed 600 rpm
Power supply3 x 1.5 V LR20 (D) or 2 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.)Non-rechargeable batteries 85 hRechargeable batteries (NiMH) 30 h
Tripod connection 5/8"Length 200 mmWidth 220 mmHeight 190 mmWeight 2.3 kg
Scope of delivery
RD5 laser receiver with bracket (F 034 069 0N9) 3
NMB1 (1 608 M00 1N0) 3
CHNM1 charger with EU/UK power cable (1 608 M00 2N2) 3
Hard carry case (1 608 M00 0N0) 3
12 | Rotation lasers
1
Rot
atio
n la
sers
: Hor
izon
tal l
aser
ALH
Electronic self-levelling rotation laser – horizontal single-slope capable
� Exceptionally high accuracy, long range, robust and waterproof � Cross-axis levelling � Manual slope capability of ± 10% using keypad
Additional features � Clearly visible laser beam � Anti-Drift System
Applications � Construction � Landscaping � Foundations � Walls, elevation marking � Grading
Technical specifications ALH
Part number F 034 061 A00Laser diode 650 nmLaser class 2MWorking range with laser receiver 425 m (radius)Accuracy ± 0.05 mm/mSelf-levelling range ± 5° Dust and splash protection IP67Rotation speed 600 rpm
Power supply4 x 1.5 V LR20 (D)1 or 4 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.)Rechargeable batteries (NiMH) 30 hNon-rechargeable batteries 85 h1
Tripod connection 5/8"Length 160 mmWidth 160 mmHeight 215 mmWeight 2.5 kg
Scope of delivery
LD440 laser receiver with bracket (F 034 069 100) 3
1 x NiMH battery pack (1 608 M00 1NA) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
2 x 1.5 V LR6 (AA) 3
Hard carry case (1 608 M00 05M) 3
1 can only be used together with a non-rechargeable battery holder (1 608 M00 05R)
Rot
atio
n la
sers
: Hor
izon
tal l
aser
1
Rotation lasers | 13
LM800GR
Electronic self-levelling rotation laser – horizontal dual-slope capable
� Horizontal dual-slope capable � Exceptionally high accuracy � Exceptionally long range
Additional features � Robust and waterproof � Highly visible diode � Cross-axis levelling � Manual slope capability of ± 10% using keypad
Applications � Civil engineering � Building a patio � Driveways and paving � Walls � Elevation marking � Grading � Landscaping
Technical specifications LM800GR
Part number F 034 061 9NGLaser diode 650 nmLaser class 2MWorking range with laser receiver 425 m (radius)Accuracy ± 0.05 mm/m horizontalSelf-levelling range ± 5° Dust and splash protection IP55Rotation speed 600 rpm
Power supply1 x 7.2 V (2600 mAh) (NiMH batteries)
Operating time (max.) 15 hTripod connection 5/8"Length 159 mmWidth 162 mmHeight 203 mmWeight 2.5 kg
Scope of delivery
LD400 laser receiver with bracket (F 034 069 000) 3
RC700 remote control (F 034 069 A00) 3
1 x NiMH battery pack (1 608 M00 1N9) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
2 x 1.5 V LR6 (AA) 3
1 x 9 V 6LR61 Block 3
Hard carry case (1 608 M00 05N) 3
Available until the end of 2012.
1
Rot
atio
n la
sers
: Hor
izon
tal l
aser
14 | Rotation lasers
LMH-CU
Electronic self-levelling rotation laser
� Fast levelling – at the push of a button � Splashproof housing � Automatic horizontal self-levelling
Additional features � Anti-Drift System � Easy operation
Technical specifications LMH-CU
Part number F 034 061 700Laser diode 650 nmLaser class 2MWorking range with laser receiver 305 m (radius)Accuracy ± 0.08 mm/mSelf-levelling range ± 3° Dust and splash protection IP54Rotation speed 600 rpm
Power supply4 x 1.5 V LR20 (D)1 or 4 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.)Non-rechargeable batteries 60 h1
Rechargeable batteries (NiMH) 30 hTripod connection 5/8"Length 160 mmWidth 160 mmHeight 215 mmWeight 2.5 kg
Scope of delivery
LD400 laser receiver with bracket (F 034 069 000) 3
1 x NiMH battery pack (1 608 M00 1NA) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
1 x 9 V 6LR61 Block 3
Hard carry case (1 608 M00 05N) 3
Available until the end of 2012.1 can only be used together with a non-rechargeable battery holder (1 608 M00 05R)
Applications � Civil engineering � Walls � Elevation marking � Landscaping � Building a patio
Rotation lasers | 15
Rot
atio
n la
sers
: Rot
atio
n la
ser r
ecei
ver
1
LD400
LD440
Robust and accurate universal laser receiver
� Universal bracket for mounting on square, round and oval measuring rods or similar � Front and back displays � Three levels of sensitivity
Additional features � Three levels of speaker volume � Universal bracket for mounting on measuring rods � Robust rubber-coated housing � Automatic shutdown after 5–8 minutes
Applications � Can be used with the following rotation lasers: LMH-CU, LM800GR, LM800DPI
Professional universal laser receiver for rotation lasers for all applications
� Seven-channel height display indicates the position of the LD440 in relation to the plane of the laser beam � Direction memory (displays the side on which the laser signal has left the laser reception range) � Electronic filter (protects against direct sunlight and electromagnetic radiation)
Additional features � Three levels of measuring accuracy � Three levels of speaker volume � Universal bracket for mounting on measuring rods � Magnets for ceiling applications � Robust rubber-coated housing � Automatic shutdown after 5–8 minutes
Applications � Can be used with the following rotation lasers: ALH, ALHV, ALGRD
Technical specifications LD400
Part number F 034 069 000Range 425 mPower supply 1 x 9 V 6LR61 BlockDust and splash protection IP55Accuracy of reception range 0.75/1.5/3.0 mmLength 25 mmWidth 76 mmHeight 169 mmWeight 275 g
Technical specifications LD440
Part number F 034 069 100Range 425 mPower supply 2 x 1.5 V LR6 (AA)Dust and splash protection IP67Accuracy of reception range 0.75/1.5/3.0 mmLength 30 mmWidth 78 mmHeight 154 mmWeight 0.25 kg
Scope of delivery
Bracket (F 034 092 BN7) 3
1 x 9 V 6LR61 Block 3
Scope of delivery
Bracket (F 034 092 BN8) 3
2 x 1.5 V LR6 (AA) 3
From October 2012 with RB1.
16 | Rotation lasers
1
Rot
atio
n la
sers
: Rot
atio
n la
ser r
ecei
ver
LD440G
LD500
Professional universal laser receiver for lasers with a green beam
� Seven-channel height display indicates the position of the LD440G in relation to the plane of the laser beam � Direction memory (displays the side on which the laser signal has left the laser reception range) � Electronic filter (protects against direct sunlight and electromagnetic radiation)
Additional features � Three levels of measuring accuracy � Three levels of speaker volume � Universal bracket for mounting on measuring rods � Magnets for ceiling applications � Robust rubber-coated housing � Automatic shutdown after 5–8 minutes
Applications � Can be used with rotation lasers with a green beam: ALHVG, ALHVGD
Electronic machine control receiver for rotation lasers
� Strong magnets for mounting on excavators etc. � Extra large 13 cm reception field � 240° field of reception
Additional features � Three levels of measuring accuracy � Display lighting � Sturdy Lexan housing: designed for harsh construction applications
Applications � Can be used with rotation lasers with a red beam
Technical specifications LD440G
Part number F 034 069 1N1Range 425 mPower supply 2 x 1.5 V LR6 (AA)Dust and splash protection IP67Accuracy of reception range 0.75/1.5/3.0 mmLength 30 mmWidth 78 mmHeight 154 mmWeight 0.25 kg
Technical specifications LD500
Part number F 034 069 9N0Range 200 mPower supply 2 x 1.5 V LR6 (AA)Dust and splash protection IP54Accuracy of reception range 5/10/25 mmLength 170 mmWidth 110 mmHeight 40 mmWeight 0.8 kg
Scope of delivery
Bracket (F 034 092 BN8) 3
2 x 1.5 V LR6 (AA) 3
Scope of delivery
Bracket (F 034 092 BN9) 3
2 x 1.5 V LR6 (AA) 3
Rot
atio
n la
sers
: Rot
atio
n la
ser r
ecei
ver
1
Rotation lasers | 17
LD901
RD5
Laser receiver for indoor and outdoor use
� Sturdy magnets for ceiling applications � Clearly visible blue LED that acts as a centre mark � Robust rubber-coated housing, protected against water and dust
Additional features � Two levels of speaker volume � Universal bracket for mounting on measuring rods � Automatic shutdown after 5–8 minutes
Applications � Can be used with rotation lasers with a red beam
Rotation laser receiver
� Easily attached to a staff using the bracket � Clear display showing all necessary information � LED height indicator
Additional features � Three levels of measuring accuracy � Three levels of speaker volume � Universal bracket for mounting on measuring rods � Magnets for ceiling applications � Robust rubber-coated housing � Automatic shutdown after 5–8 minutes
Applications � Can be used with the following rotation lasers: RL25H, RL25HV
Technical specifications LD90
Part number F 034 069 4N0Range 150 mPower supply 1 x 9 V 6LR61 BlockAccuracy of reception range +/-1.5 / +/-3.0 mmLength 132 mmWidth 57 mmHeight 30 mmWeight 0.2 kg
Technical specifications RD5
Part number F 034 069 0N9Range 400 mPower supply 2 x 1.5 V LR6 (AA)Dust and splash protection IP57Accuracy of reception range ± 0.5/1/2 mmLength 30 mmWidth 78 mmHeight 154 mmWeight 0.25 kg
Scope of delivery
Bracket 3
1 x 9 V 6LR61 Block 3
Scope of delivery
RB 1 bracket (1 608 M00 7N0) 3
2 x 1.5 V LR6 (AA) 3
1 available until 31.12.2012
18 | Rotation lasers
1
Rot
atio
n la
sers
: Acc
esso
ries
Remote controls
Wall mount
Chargers, batteries and battery holders
RC400X Remote control. Range of 30 m.
Suitable for ALGR
Part number F 034 069 AN7
RC700 Remote control. Range of 30 m. Setting the rotation speed. Aligning the vertical plane.
Suitable for ALH, ALHV, ALHVG, LM800
Part number F 034 069 A00
RM7 Remote control.
Suitable for RL25H, RL25HV
Part number F 034 069 0N1
V-Mount Wall mount for use on ceilings and walls For mounting lasers during interior fitting work. 5/8" thread, with clamp for mounting on ceilings or wall studs.
Suitable for Rotation, line and point lasers with 5/8" tripod fitting
Part number F 034 092 CN2
57-CHNMEU Universal charger for rotation lasers.
Suitable for AL series, LM800
Part number 1 608 M00 2NE
57-NMB700 Battery (nickel metal hydride) 4 x 1.2 V HR20 (D). For use with rotation lasers.
Suitable for AL series, LMH series
Part number 1 608 M00 1NA
CHNM1 Charger for rotation lasers.
Suitable for RL25H, RL25HV
Part number 1 608 M00 2N2
57-NMB1000 Battery (nickel metal hydride) 1 x 7.2 V (2600 mAh). For use with rotation lasers.
Suitable for LM800
Part number 1 608 M00 1N9
NMB1 Battery (nickel metal hydride). For use with rotation lasers.
Suitable for RL25H, RL25HV
Part number 1 608 M00 1N0
NMB1 Set Battery (nickel metal hydride) and charger. For use with rotation lasers.
Suitable for RL25H, RL25HV
Part number 1 608 M00 2N0
Non-rechargeable battery holder
Holder for alkaline batteries. For use with rotation lasers.
Suitable for AL series, LMH series
Part number 1 608 M00 05R
Alkaline Tray Holder for alkaline batteries.
Suitable for RL25H, RL25HV
Part number 1 608 M00 9N0
Rotation lasers | 19
Rot
atio
n la
sers
: Acc
esso
ries
1
Targets
Brackets for laser receivers
Laser glasses
Laser grade adapter
TARGET Target for lasers with a red beam.Target for use with lasers during interior work. With magnetic base for attaching to ceiling T-bars and wall studs. With cm and inch graduations.
Suitable for Lasers with a red beam
Part number 1 608 M00 8NB
TARGET-G Target for lasers with a green beam.Target for use with lasers during interior work. With magnetic base for attaching to ceiling T-bars and wall studs. With cm and inch graduations.
Suitable for Lasers with a green beam
Part number 1 608 M00 8NC
RB400 Bracket for laser receiver.
Suitable for LD400, LLD20
Part number F 034 092 BN7
RB440 Bracket for laser receiver.
Suitable for LD440, LD440G, XLD2
Part number F 034 092 BN8
RB500 Bracket for laser receiver.
Suitable for LD500
Part number F 034 092 BN9
RB1 Bracket for laser receiver.
Suitable for RD5, LD440, LD440G, XLD21
Part number 1 608 M00 7M0
GLASSES Laser glasses. For better visibility of the red laser beam in bright conditions and over longer distances.
Suitable for AL series, LM800
Part number 1 608 M00 7N5
58-LGA Laser grade adapter with 0° – 90° display.Sets the laser to the desired grade. ±10-minute display. 5/8"-11 thread.
Suitable for ALH, ALHV, ALHVG, ALGRD, LM800DPI, LM800GR, LMH-CU, RL25H, RL25HV
Part number F 034 092 6N1
GLASSES-G Laser glasses.For better visibility of the green laser beam in bright conditions and over longer distances.
Suitable for AL series, LMH series
Part number 1 608 M00 7N6
1 From October 2012.
Pipe laser
Pipe
lase
r
2
Pipe laser | 21
LMPL20
Robust, self-levelling pipe laser for the most demanding jobsite conditions
� Long-range remote control and large display � Dual-slope capability of ± 10% in horizontal position using keypad and remote control � Exceptionally high accuracy and long working range
Additional features � Electronic self-levelling � Robust and waterproof � LED plumb reference � Cross-axis levelling
Applications � Manhole and sewer construction � Can be used in the pipe, on the pipe or in the manhole
Technical specifications LMPL20
Part number F 034 062 2N1Laser diode 635 – 650 nmLaser class 3R
Accuracy
± 10 arc seconds at 25 °C(± 1 arc second / 1 °C temperature difference)
Working range 200 mGrade range –15% to +40%Line range ± 15%Dust and splash protection IP57
Power supplyNiMH battery pack/ 4 x D cell batteries
Operating time (max.) 40 h/60 hLength 400 mmWidth 160 mmHeight 160 mmWeight 4.8 kg
Scope of delivery
RC20 remote control (F 034 069 PN1) 3
Target set (1 608 M00 8NE) 3
12 V cable PLPC20 (1 608 M00 3N4) 3
Leg set1 3
1 x NiMH battery pack (1 608 M00 1NK) 3
Charger with EU/UK power cable set 3
Hard carry case 3
1 Length of legs: 200 mm pipe diameter: 36.9 mm250 mm pipe diameter: 62.3 mm300 mm pipe diameter: 87.5 mm
22 | Pipe laser
2
Pipe
lase
r: R
emot
e co
ntro
l and
acc
esso
ries
RC20
Remote control for LMPL20 pipe laser
� Robust, waterproof housing � Long working range � Two-way radio communication provides real-time data exchange between the remote control and the pipe laser
Applications � Grade control � Line control � Menu functions � Battery indicator � Standby and operating modes � Pipe laser lock (anti-tamper) � Pulse mode
Technical specifications RC20
Part number F 034 069 PN1Range, remote control Up to 200 mPower supply 3 x 1.5 V LR03 (AAA)Weight 0.2 kg
Scope of delivery
3 x 1.5 V LR03 (AAA) 3
Accessories for pipe lasers
59-PLMHT Manhole mount for the pipe laser.
Suitable for LMPL20
Part number F 034 092 GN0
59-PLTRIVET Trivet plate mount that acts as a platform for the pipe laser in the manhole. Easy height adjustment to suit the pipe elevation.
Suitable for LMPL20
Part number F 034 092 EN1
59-NMH20 Rechargeable battery pack. NiMH. 4.8 volts.
Suitable for LMPL20
Part number 1 608 M00 1NK
59-PLPC20 Power cable. 12 volts.
Suitable for LMPL20
Part number 1 608 M00 3N4
59-TARGET-L Large target (24.5 x 7 cm).
Suitable for LMPL20
Part number 1 608 M00 8NF
59-PLBP20 Non-rechargeable battery pack. 4 mono cells (alkaline).
Suitable for LMPL20
Part number 1 608 M00 1ND
59-TARGET-S Small target (11.5 x 7 cm).
Suitable for LMPL20
Part number 1 608 M00 8NG
59-TARGET Target set consisting of target holder, TARGET-S and TARGET-L.The TARGET-S (11.5 x 7 cm) and TARGET-L (24.5 x 7 cm) can be slid into the guide track of the holder from above and fixed in place using a locking screw.
Suitable for LMPL20
Part number 1 608 M00 8NE
Line lasers
3
Line
lase
rs24 | Line lasers
GIZLT-3
ILMXL
Self-levelling line laser for indoor and outdoor use
� Horizontal levelling beam, 2 vertical plumb lines at a 90° angle � Long working range in combination with the LLD20 receiver � Manual mode for tilting
Additional features � Laser cross � Additional 90° line
Small, handy line laser
Scope of delivery
Wall mount 3
Laser glasses 3
3 x 1.5 V LR6 (AA) 3
Fabric bag 3
Scope of delivery
Magnetic mini tripod (F 034 091 LN3) 3
3 x 1.5 V LR6 (AA) 3
Fabric bag 3
Technical specifications GIZLT-3
Part number F 034 063 900Laser diode 635 nmLaser class 2MWorking range 10 mWorking range with laser receiver 30 mAccuracy ± 0.4 mm/mSelf-levelling range ± 4° Dust and splash protection IP54Power supply 3 x 1.5 V LR6 (AA)Operating time (max.) 15–25 hTripod connection 5/8"Length 80 mmWidth 80 mmHeight 160 mmWeight 0.7 kg
Technical specifications ILMXL
Part number F 034 063 100Laser diode 635 nmLaser class 2MWorking range 15 mAccuracy ± 0.4 mm/mSelf-levelling range ± 4°Dust and splash protection IP54Power supply 3 x 1.5 V LR6 (AA)Operating time (max.) 20 hTripod connection 1/4" x 20Length 95 mmWidth 70 mmHeight 90 mmWeight 0.4 kg
� Laser cross � Horizontal levelling line � Vertical plumb line
Additional features � Manual mode for tilting � Comprehensive scope of delivery
Applications � Laying floor and wall tiles � Fitting cabinets and shelves
Line lasers | 25
Line
lase
rs
3
ILMXT, ILMXTE
Line laser for indoor and outdoor use
� Laser cross � Easy operation and high precision � Range of up to 30 m in combination with LLD20 receiver
Additional features � Can also be used in bright conditions with the LLD20 receiver � Horizontal levelling beam � Vertical plumb line � Manual mode for tilting � Comprehensive scope of delivery
Applications � Interior fitting work � Remodelling projects � Installing walls and pipes � Installing ceiling grids � Laying floor and wall tiles � Fitting cabinets and shelves � Outdoor levelling
� Patios � Panelling
Technical specifications ILMXT, ILMXTE
Part number F 034 063 500, F 034 063 5N2Laser diode 635 nmLaser class 2MWorking range 15 mWorking range with laser receiver 30 mAccuracy ± 0.3 mm/mSelf-levelling range ± 5° Dust and splash protection IP55Power supply 3 x 1.5 V LR6 (AA)Operating time (max.) 25 hTripod connection 1.4" x 20Length 100 mmWidth 65 mmHeight 110 mmWeight 0.9 kg
Scope of delivery
Magnetic mini tripod (F 034 091 LN3) 3
LLD20 laser receiver with bracket 31
3 x 1.5 V LR6 (AA) 3
1 x 9 V 6LR61 Block 31
Hard carry case 3
1 only with ILMXTE
3
Line
lase
rs26 | Line lasers
ILMXTG
Line laser with green beam for professional interior fitting work
� High visibility due to green laser beam � Self-levelling � Laser cross
Additional features � Horizontal levelling beam and vertical plumb line � Manual mode for tilting � Easy to operate thanks to one-button control
Applications � Installing drywalls � Interior fitting work � Remodelling projects � Installing walls and pipes � Installing ceiling grids � Laying floor and wall tiles � Fitting cabinets and shelves
Technical specifications ILMXTG
Part number F 034 063 7N1Laser diode 532 nm greenLaser class 2MWorking range 30 mAccuracy ± 0.3 mm/mSelf-levelling range ± 5° Dust and splash protection IP55Power supply 3 x 1.5 V LR6 (AA)Operating time (max.) 10–12 hTripod connection 1.4" x 20Length 100 mmWidth 65 mmHeight 110 mmWeight 0.9 kg
Scope of delivery
Magnetic mini tripod (F 034 091 LN3) 3
Charger 3
3 x NiMH batteries 3
Hard carry case 3
Line lasers | 27
Line
lase
rs
3
XLP34, XLP34PKG
High-performance line laser for indoor and outdoor use
� Self-levelling � 1 horizontal laser line plus 2 vertical laser lines arranged at a 90° angle � Downward plumb beam, upward plumb point
Additional features � Downward plumb beam that can be switched on separately in all operating modes
Outdoor applications � Levelling of concrete formwork and frames, and alignment at a 90° angle � Patios and courtyards � Landscaping � Bricklaying
Applications � Floor and wall tiles � Interior design at a 90° angle � Cabinets and shelves � Pipes and conduits � Interior fitting work � Point transfer
Technical specifications XLP34, XLP34PKG
Part number F 034 063 800, F 034 063 8N1Laser diode 635 nmLaser class 2MWorking range 30 mWorking range with laser receiver 55 mAccuracy 0.2 mm/mSelf-levelling range ± 3° Dust and splash protection IP54Power supply 3 x 1.5 V LR6 (AA)Tripod connection 1.4" x 20Length 130 mmWidth 110 mmHeight 110 mmWeight 0.7 kg
Scope of delivery
Magnetic mini tripod (F 034 091 LN3) 3
XLD2 laser receiver (F 034 069 BN1) 31
B-Mount 31
2 magnetic targets (1 608 M00 8NB) 3
Laser glasses (1 608 M00 7N5) 3
3 x 1.5 V LR6 (AA) 32
5 x 1.5 V LR6 (AA) 31
Hard carry case 3
1 only with XLP34PKG2 only with XLP34
3
Line
lase
rs28 | Line lasers
LM2
Tile laser
� Projects a 90° angle onto floors and walls � Projects vertical laser lines � Vertical lines are set using the adjustable feet and level vials
Additional features � Very easy to operate thanks to one-button control
Applications � Laying floor and wall tiles � Panelling � Installing drywalls
Technical specifications LM2
Part number F 034 064 101Laser diode 635 nmLaser class 2MWorking range 30 mAccuracy ± 0.3 mm/mSelf-levelling range ManualDust and splash protection IP55Power supply 3 x 1.5 V LR6 (AA)Operating time (max.) 30 hLength 250 mmWidth 140 mmHeight 55 mmWeight 0.5 kg
Scope of delivery
2 magnetic targets (1 608 M00 8NB) 3
3 x 1.5 V LR6 (AA) 3
Fabric bag 3
3
Line
lase
rs
Line lasers | 29
LL20
Self-levelling line laser
� Self-levelling: horizontal � Easy to operate thanks to compact design and one-button control � Robust design for tough jobsite conditions
Additional features � High precision and extensive working range for outdoor applications
Applications � Bricklaying, screeding, transferring heights � Excavation work � Formwork � Installation
Technical specifications LL20
Part number F 034 063 0N8Laser diode 635 nmLaser class 2Working range with laser receiver 80 mAccuracy ± 0.15 mm/m horizontalSelf-levelling range ± 4° Dust and splash protection IP55Power supply 4 x 1.5 V LR6 (AA) Operating time (max.) 50 hTripod connection 5/8"Length 141 mmWidth 53 mmHeight 188 mmWeight 0.6 kg
Scope of delivery
LD3 laser receiver with bracket (F 034 069 LN1) 3
6 x 1.5 V LR6 (AA) 3
Hard carry case 3
30 | Line lasers
3
Line
lase
rs: L
ine
lase
r rec
eive
r
LLD20
XLD2
Line laser receiver
� Seven-channel height display indicates the position of the LLD20 in relation to the plane of the laser beam � Direction memory (displays the side on which the laser signal has left the laser reception range) � Electronic filter protects against direct sunlight and electromagnetic radiation
Additional features � Dual-sided LCD display with full function overview and graphical display: power on/off indicator, battery charge monitoring, accuracy setting, speaker volume � Rubber reinforcement to protect against impact, and splashproof seal � Automatic shutdown after 5–8 minutes
Applications � Can be used with line lasers with a pulse function
Professional line laser receiver
� Seven-channel height display indicates the position of the XLD2 in relation to the plane of the laser beam � Direction memory (displays the side on which the laser signal has left the laser reception range) � Electronic filter protects against direct sunlight and electromagnetic radiation
Additional features � Concise keypad with on and off button � Rubber reinforcement to protect against impact � Automatic shutdown after 5–8 minutes
Applications � Can be used with line lasers with a pulse function
Technical specifications LLD20
Part number F 034 069 700Range 30 mPower supply 1 x 9 V 6LR61 BlockDust and splash protection IP55Accuracy ± 1.3/± 2.5 mmLength 25 mmWidth 76 mmHeight 169 mmWeight 0.3 kg
Technical specifications XLD2
Part number F 034 069 BN1Range 55 mPower supply 2 x 1.5 V LR6 (AA)Dust and splash protection IP57Accuracy ± 1.3/± 2.5 mmLength 25 mmWidth 76 mmHeight 152 mmWeight 0.3 kg
Scope of delivery
Bracket 3
1 x 9 V 6LR61 Block 3
Fabric bag 3
Scope of delivery
Bracket (F 034 092 BN8)1 3
2 x 1.5 V LR6 (AA) 3
1 From October 2012 with RB1.
Line
lase
rs: A
cces
sori
es a
nd la
ser r
ecei
ver
3
Line lasers | 31
LD3
Line laser receiver
� Easily attached to a staff using the bracket � Clear display showing all necessary information
Applications � Can be used with line lasers1
Technical specifications LD3
Part number F 034 069 LN1Range 80 mPower supply 2 x 1.5 V LR6 (AA)Dust and splash protection IP55Accuracy of reception range ± 3 mmLength 169 mmWidth 76 mmHeight 25 mmWeight 0.2 kg
Scope of delivery
RB1 bracket 3
2 x 1.5 V LR6 (AA) 3
Accessories for line lasers
B-Mount Batter board mount.
Suitable for XLP34
Part number F 034 092 4N0
1 From October 2012 with RB1.
Point lasers
4
Poin
t las
ers
Point lasers | 33
MP3
XP5
Self-levelling 3-beam point laser with magnetic universal mount
� High accuracy with clearly visible laser points � Easy to handle due to compact size
Applications � Aligning 90° angles � Point transfer � Levelling work
Scope of delivery
Universal mount with 1/4" and 5/8" connection 3
Target 3
Strap 3
3 x 1.5 V LR6 (AA) 3
Fabric bag 3
Scope of delivery
Universal mount with 1/4" and 5/8" connection 3
Target 3
Strap 3
3 x 1.5 V LR6 (AA) 3
Fabric bag 3
Hard carry case 3
Technical specifications MP3
Part number F 034 066 0N0Laser diode 650 nmLaser class 2MWorking range 30 mAccuracy ± 0.2 mm/mDust and splash protection IP54Power supply 3 x 1.5 V LR6 (AA)Operating time (max.) 40 hTripod connection 1/4"Length 107 mmWidth 64 mmHeight 115 mmWeight 0.5 kg
Technical specifications XP5
Part number F 034 066 500Laser diode 635 nmLaser class 2MWorking range 30 mAccuracy ± 0.3 mm/mDust and splash protection IP54Power supply 3 x 1.5 V LR6 (AA)Operating time (max.) 24 hTripod connection 1/4"Length 98 mmWidth 68 mmHeight 104 mmWeight 0.4 kg
Self-levelling 5-beam point laser with magnetic universal mount
� High accuracy with clearly visible laser points � Rubber reinforcement to protect against impact, and splashproof seal � Easy to handle due to compact size
Applications � Ideal for plumb and levelling work at a right angle � Point transfer � Levelling work
Total stations
5
Tota
l sta
tion
s
Total stations | 35
CST302R/305R
User-friendly, powerful electronic total station with superior optics
� Accuracy of 2 arc seconds (CST302R) or 5 arc seconds (CST305R) � Pre-installed, high-performance software � Large, dual-sided display
Additional features � Internal memory of 15,000 points � Working range up to 300 m without a prism and up to 5,000 m with a triple prism � Data upload and data transfer through RS-232, USB port or SD card � Menu languages: English, German, French, Spanish, Portuguese, Russian � Dual-axis compensation � Encryption function
Applications � Exact measurement of distances and angles � Horizontal stake out for excavation, formwork and fixing points on the floor and ceiling � Vertical stake out of fixing points on façades and walls
� Control line transfer onto multiple storeys and perpendicular point transfer � Checking and aligning prefab com-ponents and shuttering panels
Technical specifications CST302R/305R
Part number F 034 053 2N0, F 034 053 3N0Magnification 30 xResolving power 4.0"Field of view 1°30´Minimum focus 1.3 mDistance measurement with 1 prism Up to 3,000 mAngular accuracy 2˝1, 5˝2
Dust and splash protection IP55
Working range300 m without a prism 5 km with triple prism
Internal memory 15,000 pointsTripod connection 5/8"-11Weight 9.1 kg (with hard carry case)
Scope of delivery
Software 3
Tool kit 3
Rain cover 3
Plumb bob 3
2 x batteries (NiMH) 3
Charger with EU/UK power cable (1 608 M00 2NE) 3
Cable (1 608 M00 3N1) 3
Hard carry case 3
1 with CST302R 2 with CST305R
36 | Total stations
5
Tota
l sta
tion
s: A
cces
sori
es
Accessories for total stations
Accessories for total stations
56-CHCTS Charger for electronic total station.
Suitable for CST302R, CST305R
Part number 1 608 M00 2N4
56-NMH300 Battery pack for electronic total station.
Suitable for CST302R, CST305R
Part number 1 608 M00 1NJ
56-CST9PIN Data transfer cable for electronic total station.
Suitable for CST302R, CST305R
Part number 1 608 M00 3N1
63-1010-O, 63-1010-Y Prism with all metal holder and target plate. 0/-30 mm offset. Precision ground to an accuracy of 2.5 arc seconds (62.5 mm). Optima series. Fully compatible with leading manufactur-ers. Locking screw for tilt setting. Bayonet adapter with 5/8"-11 inner thread. All metal holder and target plate.
Suitable for CST302R, CST305R
Part number 63-1010-O (Orange) F 034 055 2NG
63-1010-Y (Yellow) F 034 055 2N5
63-1010V-O Prism with all metal holder and target plate (orange) – Value Line. 0/-30 mm offset. Precision ground to an accuracy of < 5 arc seconds (62.5 mm). Optima series. Fully compatible with leading manufactur-ers. Locking screw for tilt setting. Bayonet adapter with 5/8"-11 inner thread. All metal holder and target plate.
Suitable for CST302R, CST305R
Part number 63-1010V-O (Orange) F 034 055 2NE
63-1012-O, 63-1012-Y All metal holder and target plate.
Suitable for Prism 63-2011-O, 63-2011-Y
Part number 63-1012-O (Orange) F 034 055 2NL
63-1012-Y (Yellow) F 034 055 2NJ
63-2010M-O,63-2010M-Y
Prism with plastic target plate.0/-30 mm offset. Precision ground to an accuracy of 2.5 arc seconds (62.5 mm). Durable and robust aluminium holder. Fully compatible with leading manufacturers. Holder with tilt of up to 350°. Bayonet adapter with 5/8"-11 inner thread.
Suitable for CST302R, CST305R
Part number 63-2010M-O (Orange) F 034 055 1N8
63-2010M-Y (Yellow) F 034 055 1N6
63-2012M-O Holder and target plate*.Durable and robust aluminium holder. Plastic target plate. Fully com-patible with leading manufacturers. Holder with tilt of up to 350°. Bayonet adapter with 5/8"-11 inner thread.
Suitable for Prism 63-2011-O, 63-2011-Y
Part number 63-2012M-O (Orange) F 034 055 3N6
* Supplied without prism
Total stations | 37
Tota
l sta
tion
s: A
cces
sori
es
5Accessories for total stations
63-2011V-O Prism in canister (orange) – Value Line.0/-30 mm offset. Precision ground to an accuracy of < 5 arc seconds (62.5 mm). Fully compatible with leading manufacturers.
Suitable for 63-1012-O, 63-1012-Y, 63-2012M-O
Part number 63-2011V-O (Orange) F 034 055 1NS
63-2600-O Triple prism with all metal holder and target plate.0/-30 mm offset. Precision ground to an accuracy of 2.5 arc seconds (62.5 mm). Three hermetically sealed prisms. Bayonet adapter with 5/8"-11 inner thread.
Suitable for CST302R, CST305R
Part number 63-2600-O F 034 055 5N1
63-3023 Prism with all metal holder and target plate.-34 mm offset. Leica® type H.I. and push-button mounting.High-precision, copper-coated prism. Snap-in prisms are compatiblewith Leica®/Wild type holders and prisms. GPH1 prism and holder(centrally symmetrical point in the standing axis of the prism carrier).
Suitable for CST302R, CST305R
Part number 63-3023 F 034 055 4NA
63-3022 Prism with holder.-34 mm offset. Precision ground to an accuracy of 2.5 arc seconds(62.5 mm). GPH1-compatible with snap-in lock. Made of high-strengthplastic, copper-coated. Centrally symmetrical point in the standing axisof the prism carrier (visible prism centre).
Suitable for CST302R, CST305R
Part number 63-3022 F 034 055 4N9
63-3024 Prism.-34 mm offset. Precision ground to an accuracy of 2.5 arc seconds(62.5 mm). GPH1-compatible with snap-in lock. Made of high-strengthplastic, copper-coated. Centrally symmetrical point in the standing axisof the prism carrier (visible prism centre).
Suitable for CST302R, CST305R
Part number 63-3024 F 034 055 4NB
63-4000 Reflector system.-34 mm offset. Ideal for working at short distances (up to 200 m), e.g.convergence measurements in tunnel construction. Compatible withWild type plug-in stud.
Suitable for CST302R, CST305R
Part number 63-4000 F 034 005 5N0
63-2011-O, 63-2011-Y Prism.0/-30 mm offset. Precision ground to an accuracy of 2.5 arc seconds (62.5 mm). Fully compatible with leading manufacturers.
Suitable for 63-1012-O, 63-1012-Y, 63-2012M-O
Part number 63-2011-O (Orange) F 034 055 1NG
63-2011-Y (Yellow) F 034 055 1NE
63-3025 Prism holder.Made of high-strength plastic.
Suitable for Prism 63-3024
Part number 63-3025 F 034 055 4NC
38 | Total stations
5
Tota
l sta
tion
s: A
cces
sori
es
Accessories for total stations
65-1700-R Mini prism stake out pole system.Precise 25.4-mm mini prism with 0/-30 mm offset. M6 thread connec-tion at top and bottom. Precision prism pole. Supplied with fabric bag, 2 points and four 30-cm extensions (2 x silver and 2 x red anodised) for adapting to different conditions. Tilting axis height with point = 100 mm.
Suitable for CST302R, CST305R
Part number 65-1700-R F 034 055 BN3
65-3500M Mini prism with all metal holder and target plate.With fabric bag and batter board point. -34 mm offset. Side-mounted circular vial.
Suitable for CST302R, CST305R
Part number 65-3500M F 034 055 CN1
65-1500M Universal mini prism with metal holder and accessories.0/-30 mm offset. Diameter of 25.4 mm, sealed. 5/8"-11 thread. Precision ground to an accuracy of 2 arc seconds. Side-mounted circular vial.
Suitable for CST302R, CST305R
Part number 65-1500M-C (Chartreuse) F 034 055 6N4
65-1500M-R (Red) F 034 055 6N5
Theodolites
Theo
dolit
es
6
40 | Theodolites
Scope of delivery
Sunshade 3
Rain cover 3
Tool kit 3
Drying cloth 3
Plumb bob 3
Batteries 3
Hard carry case 3
Technical specifications DGT10, DGT2
Part number F 034 054 3N0, F 034 054 3N1Angular accuracy 5˝1, 2˝2
Magnification 30 xResolving power 2.5"Field of view 1°30´Minimum focus 1.3 mCircle graduations 360°/400 gonsTripod connection 5/8"-11Dust and splash protection IP54Weight 4.5 kg
DTEP Diagonal eyepiece.
Suitable for DGT10, DGT2
Part number 1 608 M00 7N4
DGT10, DGT2
Accessories for theodolites
Powerful digital theodolite
� Accuracy of 2 arc seconds (DGT2) or 5 arc seconds (DGT10) � Easy and precise angle measurement � Large, dual-sided display with lighting
Additional features � Comprehensive range of accessories � Robust / IP54
Applications � Suitable for all angle measurements on the construction site � Transferring batter board axes � Staking out angles and gradients � Checking and aligning prefab com-ponents and formwork � Vertical transfer of control lines
1 with DGT10 2 with DGT2
Optical levels
42 | Optical levels
7
Opt
ical
leve
ls
PAL series
Optical level with 22 x or 26 x magnification
� Sturdy metal housing with rubber reinforcement � Fast aperture � Magnetically dampened compensator
Additional features � Circular vial with penta prism � Fine motion knobs on both sides with friction-braked rotation, endless horizontal drive � Large focussing knob � Target collimator � Graduated circle with either 360 degrees or 400 gons � Compensator lock (transport lock)
Applications � Patios � Landscaping � General construction � Foundations � Road construction � Excavation
Technical specifications PAL22D, PAL22G
Part number F 034 068 7N4, F 034 068 7N7Unit of measure Degrees1, gons2
Magnification 22 xWorking range 76 mLevelling accuracy 0.1 mm/mAngular accuracy 1°1, 1 gon2
Compensator setting accuracy ± 0.8"Clear objective aperture 36 mmLength 220 mmWidth 70 mmHeight 150 mmWeight 1.9 kg
Technical specifications PAL26D, PAL26G
Part number F 034 068 8NE, F 034 068 8NHUnit of measure Degrees3, gons4
Magnification 26 xWorking range 99 mLevelling accuracy 0.05 mm/mAngular accuracy 1°3, 1 gon4
Compensator setting accuracy ± 0.5"Clear objective aperture 40 mmLength 220 mmWidth 70 mmHeight 150 mmWeight 1.9 kg
Scope of delivery
Lens cover 3
Plumb bob 3
Allen wrench 3
Adjusting pin 3
Hard carry case (1 608 M00 05S) 3
1 only with PAL22D2 only with PAL22G3 only with PAL26D4 only with PAL26G
Opt
ical
leve
ls
7
Optical levels | 43
SAL20N and SAL24N
Optical level with 20 x or 24 x magnification
� Sturdy metal housing with rubber reinforcement � Fast aperture � Magnetically dampened compensator
Additional features � Circular vial with penta prism � Fine motion knobs on both sides with friction-braked rotation, endless horizontal drive � Large focussing knob � Target collimator � Graduated circle with either 360 degrees or 400 gons � Compensator lock (transport lock)
Applications � Patios � Landscaping � General construction � Foundations � Road construction � Excavation
Technical specifications SAL20ND, SAL20NG
Part number F 034 068 1N7, F 034 068 1N8Unit of measure Degrees1, gons2
Magnification 20 xWorking range Up to 61 mLevelling accuracy 0.1 mm/mAngular accuracy 1°1, 1 gon2
Compensator setting accuracy ± 0.8"Clear objective aperture 36 mmLength 220 mmWidth 70 mmHeight 150 mmWeight 1.9 kg
Technical specifications SAL24ND, SAL24NG
Part number F 034 068 400, F 034 068 401Unit of measure Degrees3, gons4
Magnification 24 xWorking range Up to 91 mLevelling accuracy 0.05 mm/mAngular accuracy 1°3, 1 gon4
Compensator setting accuracy ± 0.8"Clear objective aperture 36 mmLength 220 mmWidth 70 mmHeight 150 mmWeight 1.9 kg
Scope of delivery
Lens cover 3
Plumb bob 3
Allen wrench 3
Adjusting pin 3
Hard carry case (1 608 M00 05S) 3
1 only with SAL20ND2 only with SAL20NG3 only with SAL24ND4 only with SAL24NG
44 | Optical levels
7
Opt
ical
leve
ls
SAL28N and SAL32N
Optical level with 28 x or 32 x magnification
� Sturdy metal housing with rubber reinforcement � Fast aperture � Magnetically dampened compensator
Additional features � Circular vial with penta prism � Fine motion knobs on both sides with friction-braked rotation, endless horizontal drive � Large focussing knob � Target collimator � Graduated circle with either 360 degrees or 400 gons � Compensator lock (transport lock)
Applications � Patios � Landscaping � General construction � Foundations � Road construction � Excavation
Technical specifications SAL28ND, SAL28NG
Part number F 034 068 A17, F 034 068 A19Unit of measure Degrees1, gons2
Magnification 28 xWorking range Up to 107 mLevelling accuracy 0.05 mm/mAngular accuracy 1°1, 1 gon2
Compensator setting accuracy ± 0.5"Clear objective aperture 40 mmLength 220 mmWidth 70 mmHeight 150 mmWeight 1.9 kg
Technical specifications SAL32ND, SAL32NG
Part number F 034 068 200, F 034 068 201Unit of measure Degrees3, gons4
Magnification 32 xWorking range Up to 122 mLevelling accuracy 0.05 mm/mAngular accuracy 1°3, 1 gon4
Compensator setting accuracy ± 0.3"Clear objective aperture 40 mmLength 220 mmWidth 70 mmHeight 150 mmWeight 1.9 kg
Scope of delivery
Lens cover 3
Plumb bob 3
Allen wrench 3
Adjusting pin 3
Hard carry case (1 608 M00 05S) 3
1 only with SAL28ND2 only with SAL28NG3 only with SAL32ND4 only with SAL32NG
Laser rangefinders
3
46 | Laser rangefinders
Lase
r ran
gefi
nder
s
8
RF5
RF25
The robust solution for precise short distance measurement
� Rubber reinforcement ensures robustness and durability � Jobsite tested: dust and splash protected (IP54), shockproof when dropped from a height of up to 1 m � Large, automatically illuminated, easy to read three line display
Additional features � User-friendly buttons for exceptionally good handling
The robust solution for long outdoor distances
� Typ. measuring accuracy of ± 1 mm and measuring range of up to 250 m � Integrated viewfinder for measuring in bright sunlight � Glass lens and ceramic optics carrier for high precision and robustness
Additional features � Outstanding functionality: ten functions for faster and more precise work � Easy operation thanks to clear keypad and display symbols � Fold-out measuring pin for precise measurements in all situations � Large, easy to read, illuminated four line display
Technical specifications RF5
Part number F 034 072 0N2Measuring range 0.05 – 50 mMeasuring accuracy, typ. ± 1.5 mmBattery lifetime, individual measurements Approx. 10,000Battery lifetime, continuous measurement Approx. 2.5 hShock protection Up to 1 mDust and splash protection IP54Length 114 mmWidth 53 mmHeight 31 mmWeight 0.14 kg
Technical specifications RF25
Part number F 034 072 3N0Measuring range 0.05 – 250 mMeasuring accuracy, typ. ± 1.0 mmBattery lifetime, individual measurements Approx. 30,000Battery lifetime, continuous measurement Approx. 5 hShock protection Up to 1 mDust and splash protection IP54Length 120 mmWidth 66 mmHeight 37 mmWeight 0.24 kg
Scope of delivery
2 x 1.5 V LR03 (AAA) 3
Hand strap 3
Protective case 3
Manufacturer’s certificate 3
Scope of delivery
4 x 1.5 V LR03 (AAA) 3
Hand strap 3
Protective case 3
Manufacturer’s certificate 3
Measuring wheels
Mea
suri
ng w
heel
s
9
48 | Measuring wheels
32-401M
32-416M
All-purpose measuring wheel for the most demanding jobsite conditions in construction and utilities
� High stability and long life � 6-digit counter, easy-to-read and impact-resistant � Easy pushbutton reset
Applications � Construction � Utilities � Land surveying
All-purpose measuring wheel for the most demanding jobsite conditions in land surveying
� Sturdy disc wheel for use in terrain � 6-digit counter, easy-to-read and impact-resistant � Easy pushbutton reset
Applications � Land surveying � Construction � Utilities
Technical specifications 32-401M
Part number F 034 074 5N3Wheel diameter (circumference) 31.83 cm (1 m)Max. measured value 9999.99 mWheel stand 3
Wheel brake 3
Handle FoldingMaterial Steel
Technical specifications 32-416M
Part number F 034 074 9NGWheel diameter (circumference) 31.83 cm (1 m)Max. measured value 9999.99 mWheel stand 3
Wheel brake 3
Handle FoldingMaterial Steel
Measuring wheels | 49
Mea
suri
ng w
heel
s
9
RT312M
RT412D
Lightweight, handy measuring wheel
� Ergonomic pistol grip � Individually height-adjustable � Easy pushbutton reset
Applications � Construction � Utilities � Land surveying
Digital measuring wheel with integrated display and memory
� Illuminated display makes it easy to read the values � Pause function for interruptions and combined measurements � Quickly save and recall up to four measured values
Applications � Construction � Utilities � Land surveying
Technical specifications RT312M
Part number F 034 074 R01Wheel diameter (circumference) 31.83 cm (1 m)Max. measured value 9999.99 mWheel stand 3
Handle Telescopic gripMaterial Aluminium
Technical specifications RT412D
Part number F 034 074 R02Wheel diameter (circumference) 31.83 cm (1 m)Max. measured value 9999.99 mWheel stand 3
Power supply 2 x 1.5 V LR03 (AAA)Handle Telescopic gripMaterial Aluminium
Magnetic locators
Magnetic locators | 51
Mag
neti
c lo
cato
rs
10
Magna-Trak 100
Magna-Trak 102
Very sturdy, waterproof magnetic and valve rod locator
� Visual and audible output of measurement results � Adjustable sensitivity and volume � Very lightweight and ergonomic
Additional features � Waterproof up to the housing; housing splashproof � Sturdy and lightweight aluminium tube with durable hard rubber tip
Applications � For locating ferromagnetic objects outdoors � For locating objects concealed by earth, road surface, snow and water, e.g. hydrants, marker magnets, manhole covers, valve rods, surveying marks and rods, water meters, etc.
Very sturdy, waterproof magnetic and valve rod locator
� Erase function for suppressing unwanted influences from other magnetic parts � Visual and audible output of measurement results � Adjustable sensitivity and volume
Additional features � Very lightweight and ergonomic � Waterproof up to the housing; housing splashproof � Sturdy and lightweight aluminium tube with durable hard rubber tip � Indication of power cables
Applications � For locating ferromagnetic objects outdoors � For locating objects concealed by earth, road surface, snow and water, e.g. hydrants, marker magnets, manhole covers, valve rods, surveying marks and rods, water meters, etc.
Technical specifications Magna-Trak 100
Part number F 034 082 1N0Length 102 cmLocating depth (depending on size of object) 4.6 mPower supply 6 x 1.5 V LR6 (AA)Operating time (max.) 100 hWeight 1.3 kg
Technical specifications Magna-Trak 102
Part number F 034 082 3N0, F 034 082 3N5Length 102 cmLocating depth (depending on size of object) 4.6 mPower supply 6 x 1.5 V LR6 (AA)Operating time (max.) 100 hWeight 1.3 kg
Scope of delivery
Magna-Trak 100 3
Batteries 3
Fabric bag 3
Scope of delivery
Magna-Trak 102 3
Batteries 3
Fabric bag 31
Hard carry case 32
1 only with F 034 082 3N02 only with F 034 082 3N5
10
52 | Magnetic locators
Mag
neti
c lo
cato
rs
Magna-Trak 200
Magna-Trak 202
Very sturdy, waterproof magnetic and valve rod locator
� New design, easy operation, larger display � Adjustable sensitivity and volume � Very lightweight and ergonomic
Additional features � Waterproof up to the housing; housing splashproof � Sturdy and lightweight aluminium tube with durable hard rubber tip � Indication of power cables
Applications � For locating ferromagnetic objects outdoors � For locating objects concealed by earth, road surface, snow and water, e.g. hydrants, marker magnets, manhole covers, valve rods, surveying marks and rods, water meters, etc.
Very sturdy, waterproof magnetic and valve rod locator
� Erase function for suppressing unwanted influences from other magnetic parts � Visual and audible output of measurement results � Adjustable sensitivity and volume
Additional features � Very lightweight and ergonomic � Waterproof up to the housing; housing splashproof � Sturdy and lightweight aluminium tube with durable hard rubber tip � Indication of power cables
Applications � For locating ferromagnetic objects outdoors � For locating objects concealed by earth, road surface, snow and water, e.g. hydrants, marker magnets, manhole covers, valve rods, surveying marks and rods, water meters, etc.
Technical specifications Magna-Trak 200
Part number F 034 082 4N0Length 109 cmLocating depth (depending on size of object) 4.6 mPower supply 6 x 1.5 V LR6 (AA)Operating time (max.) 100 hWeight 1.3 kg
Technical specifications Magna-Trak 202
Part number F 034 082 5N0, F 034 082 5N1Length 109 cmLocating depth (depending on size of object) 4.6 mPower supply 6 x 1.5 V LR6 (AA)Operating time (max.) 100 hWeight 1.3 kg
Scope of delivery
Magna-Trak 200 3
Batteries 3
Fabric bag 3
Scope of delivery
Magna-Trak 202 3
Batteries 3
Fabric bag 31
Hard carry case 32
1 only with F 034 082 5N02 only with F 034 082 5N1
Tripods
Trip
ods
11
54 | Tripods
ALQCI20-B
ALQCI40-B
Tripod
� Light weight aluminium tripod with quick-release clamp � Very sturdy and robust � Joints and shoe points made of metal
Additional features � Lightweight, durable, thick aluminium � Supplied with shoulder strap
Dome head tripod
� Dome head enables fast adjustment � Light weight, sturdy aluminium tripod with quick-release clamp � Very sturdy and robust
Additional features � Joints and shoe points made of metal � Supplied with shoulder strap
Technical specifications ALQCI20-B
Part number F 034 091 000Work height 97 – 160 cmMax. work height 160 cmTransport size 97 cmWeight 4.1 kgTripod thread 5/8"
Technical specifications ALQCI40-B
Part number F 034 091 70CWork height 97 – 160 cmMax. work height 160 cmTransport size 97 cmWeight 4.1 kgTripod thread 5/8"
Trip
ods
11
Tripods | 55
ALQRI20-B
ALQRI10-ELAZ
Tripod
� Medium weight aluminium tripod with quick-release clamp � Very sturdy and robust � Joints and shoe points made of metal
Additional features � Lightweight, durable, thick aluminium � Supplied with shoulder strap
Elevator tripod
� Light weight aluminium tripod with quick-release clamp � Very sturdy and robust � Joints and shoe points made of metal
Additional features � Lightweight, durable, thick aluminium � Supplied with shoulder strap
Technical specifications ALQRI20-B
Part number F 034 091 300Work height 107 – 165 cmMax. work height 165 cmTransport size 107 cmWeight 5.5 kgTripod thread 5/8"
Technical specifications ALQRI10-ELAZ
Part number F 034 091 1N1Work height 84 – 139 cmMax. work height 139 cmTransport size 84 cmWeight 4.9 kgTripod thread 5/8"
Trip
ods
11
56 | Tripods
ALQRI20-ELAZ
ALELT20
Elevator tripod
� Light weight aluminium tripod with quick-release clamp � Very sturdy and robust � Joints and shoe points made of metal
Additional features � Lightweight, durable, thick aluminium � Supplied with shoulder strap
Telescopic tripod
� Light weight tripod with quick-release clamp � Very sturdy and robust � Joints and shoe points made of metal
Additional features � Lightweight, durable, thick aluminium � Supplied with shoulder strap
Technical specifications ALQRI20-ELAZ
Part number F 034 091 100Work height 122 – 295 cmMax. work height 295 cmTransport size 122 cmWeight 7.2 kgTripod thread 5/8"
Technical specifications ALELT20
Part number F 034 091 GN0Work height 105 – 183 cmMax. work height 183 cmTransport size 105 cmWeight 5.5 kgTripod thread 5/8"
Trip
ods
11
Tripods | 57
MCTE-ELAZ20
FGHD20
Heavy-duty elevator tripod
� Work height of 4.60 m � Crank for fine adjustment � Solid joints and shoe points made of metal
Additional features � Very robust construction
Heavy weight fibreglass tripod with quick-release clamp
� Very sturdy and robust � Joints and shoe points made of metal � Extra stability due to double banded legs
Additional features � Supplied with shoulder strap � No shrinking or swelling in changing weather and temperature conditions
Technical specifications MCTE-ELAZ20
Part number F 034 091 K05Work height 213 – 460 cmMax. work height 460 cmTransport size 213 cmWeight 19 kgTripod thread 5/8"
Technical specifications FGHD20
Part number F 034 091 PN2Work height 107 – 183 cmMax. work height 183 cm Transport size 107 cmWeight 7.2 kgTripod thread 5/8"
Trip
ods
11
58 | Tripods
WDW20HV-ON
LP12-UM
Heavy weight wooden tripod with screw clamp
� Very sturdy and robust � Joints and shoe points made of metal � Extra stability due to double banded, extendible legs
Additional features � Supplied with shoulder strap � No shrinking or swelling in changing weather and temperature conditions
Laser pole platform system for fast levelling and alignment from the floor to the ceiling
� Telescopic pole with 3 sections enables easy adjustment to suit any room height � Magnetic mount with horizontal and vertical fine adjustment � Design enables use in the smallest corners and spaces
Additional features � Mount with quick-release clamp � Padded base and ceiling plates
Technical specifications WDW20HV-ON
Part number F 034 091 V09Work height 100 – 183 cmMax. work height 183 cmTransport size 100 cmWeight 7.2 kgTripod thread 5/8"
Technical specifications LP12-UM
Part number F 034 093 000Work height 100 – 360 cmMax. work height 360 cmWeight 2 kg
Scope of delivery
Fabric bag 3
Tripods | 59
Trip
ods:
Min
i tri
pod
and
acce
ssor
ies
11Mini tripod
Tripod accessories
58-MINIT Mini tripod with magnet.
Suitable for ILMXT, ILMXTG, ILMXL, GIZLT-3, MP3, XP5, XLP34
Part number F 034 091 LN3
60-BAG20 Fabric bag for tripods.Up to a length of 114 cm.
Suitable for Tripods
Part number 1 608 M00 12V
60-TFG20 Folding tripod floor guide.Aluminium, length of 70 cm.
Suitable for Tripods
Part number 1 608 M00 AN2
Staffs and “cut & fill” rods
Staffs and “cut & fill” rods | 61
Staf
fs
12
06-804M, 06-805M, 06-805MII
06-907M
Telescopic staff (aluminium)
� Light and durable aluminium alloy � Reliable and wear-resistant polycarbonate buttons lock the individual sections � Levelling scale on the front, measuring scale on the back
Additional features � Tight tolerances on extruded aluminium sections allow for smooth extension � Anodised sections are imprinted with weather-resistant and corrosion- resistant inks � Includes snap-on circular vial (06-850)
Telescopic staff (fibreglass)
� Suitable for use in water � Corrosion-resistant, non-conductive fibreglass � Levelling scale on the front, measuring scale on the back
Additional features � Tight tolerances on extruded fibreglass sections allow for smooth extension � Anodised sections are imprinted with weather-resistant and corrosion- resistant inks
Technical specifications 06-804M
Part number F 034 094 4N0Unit of measure MetricLength 4 mSections 4Material Aluminium
Technical specifications 06-907M
Part number F 034 094 EN4Unit of measure MetricLength 7.6 mSections 6Material Fibreglass
Technical specifications 06-805M, 06-805MII
Part number F 034 094 100, F 034 094 102Unit of measure MetricLength 5 mSections 5Material Aluminium
62 | Staffs and “cut & fill” rods
12
Staf
fs a
nd “
cut &
fill”
rods
: “C
ut &
fill”
rods
and
acc
esso
ries
06-TLMB
“Cut & fill” rod
� Height-adjustable, sturdy aluminium measuring rod with integrated circular vial for aligning � Scale with a fixed zero point between the red and white areas (on the front) � Non-slip Quick-Lock™ mechanism
Additional features � Colour-coded rod � Red for “too high” – silver for “too low” � Spring-loaded bottom shoe for easy extension � Supplied with receiver mounting bracket
Applications � For use with lasers � Transferring and measuring heights and height differences � Ideal for setting up ceilings and floors � Measuring elevation profiles
Technical specifications 06-TLMB
Part number F 034 094 301Unit of measure MetricLength 2.4 mSections 2Material Aluminium
Accessories for staffs and “cut & fill” rods
06-TLMB-BAG Fabric bag.For “cut & fill” rod.
Suitable for TLMB
Part number 1 608 M00 14L
06-820 Fabric bag.
Suitable for Aluminium staffs
Part number 1 608 M00 2ND
06-850 Snap-on circular vial.
Suitable for Aluminium staffs
Part number F 034 009 2N3
Accessories
64 | Accessories
13
Acc
esso
ries
Prism poles
67-4209TM Prism pole.Extendible, 135 to 250 cm, 2 sections, 5/8" connection, weight of 1.2 kg, metric and 1/10" graduations, with integrated circular vial.
Suitable for Prisms
Part number F 034 056 2N1
67-4508TMA,67-4508TML
Extendible prism pole. Measuring height of 150 to 250 cm. Two sections. Outer diameter: 32 mm at bottom, 25.4 mm at top. Quick-LockTM with adjustable height. Weight of 1.6 kg, metric and 1/10" graduations, with integrated circular vial.
Suitable for Prisms
Part number 67-4508TMA F 034 056 6N2 5/8"-11
67-4508TML F 034 056 6N4 Wild/Leica® type connection
67-4509TMA,67-4509TML
Extendible prism pole. Measuring height of 135 to 200 cm. Two sections. Outer diameter: 32 mm at bottom, 25.4 mm at top. Quick-LockTM with adjustable height. Weight of 1.2 kg, metric and 1/10" graduations, with integrated circular vial.
Suitable for Prisms
Part number 67-4509TMA F 034 056 6N7 5/8"-11
67-4509TML F 034 056 6N8 Wild/Leica® type connection
67-4512TMA,67-4512TML
Extendible prism pole. Measuring height of 150 to 360 cm. Three sections. Outer diameter: 32 mm at bottom, 19.1 mm at top. Quick-LockTM with adjustable height. Weight of 2 kg, metric gradua-tions, with integrated circular vial.
Suitable for Prisms
Part number 67-4512TMA F 034 056 6NA 5/8"-11
67-4512TML F 034 056 6NC Wild/Leica® type connection
67-4515TMA,67-4515TML
Extendible prism pole. Measuring height of 160 to 450 cm. Three sections. Outer diameter: 38 mm at bottom, 19.1 mm at top. Quick-LockTM with adjustable height. Weight of 2.7 kg, metric and 1/10" graduations, with integrated circular vial.
Suitable for Prisms
Part number 67-4515TMA F 034 056 6NF 5/8"-11
67-4515TML F 034 056 6NH Wild/Leica® type connection
67-4708TMA,67-4708TML
Extendible “Maxi Lite” prism pole.Measuring height of 250 cm. Two sections. Weight of 0.95 kg, with integrated circular vial.
Suitable for Prisms
Part number 67-4708TMA F 034 056 7N0 5/8"-11
67-4708TML F 034 056 7N1 Wild/Leica® type connection
67-4712TMA,67-4712TML
Extendible “Maxi Lite” prism pole.Measuring height of 360 cm. Three sections. Weight of 1.3 kg, with integrated circular vial.
Suitable for Prisms
Part number 67-4712TMA F 034 056 7N5 5/8"-11
67-4712TML F 034 056 7N7 Wild/Leica® type connection
67-4715TMA,67-4715TML
Extendible “Maxi Lite” prism pole.Measuring height of 460 cm. Four sections. Weight of 1.7 kg, with integrated circular vial.
Suitable for Prisms
Part number 67-4715TMA F 034 056 7NB 5/8"-11
67-4715TML F 034 056 7ND Wild/Leica® type connection
Accessories | 65
Acc
esso
ries
13Accessories for poles
67-4250, 67-4250X Tripod for prism poles with diameter of 25–38 mm.Aluminium, weight of 2.9 kg.
Suitable for Prism poles
Part number 67-4250 F 034 056 3N0 Quick-release clamp
67-4250X F 034 056 3N3 Thumb-release clamp
61-2513 Prism adapter for Leica® type stud.Plug-in stud inner thread 5/8"-11.
Suitable for Leica® prisms
Part number F 034 057 6N6
66-911 Precise double right angle penta prism in a leather pouch.Large centre lens with yellow filter, which permits foresight viewing.
Part number F 034 055 DN3
61-2521 Rotating tribrach adapter.For mounting in Wild/Leica® system tribrachs. 5/8"-11 outer thread. For mounting prism systems and adapters.
For adapting to prisms from other manufacturers
Part number F 034 057 6NC
61-2525 Zeiss type tribrach adapter with DIN plug-in stud.For mounting in Wild/Leica® system tribrachs. Bore hole for DIN plug-in stud (Zeiss system) for mounting Zeiss prisms. DIN plug-in stud with 5/8" thread.
For adapting to prisms from other manufacturers
Part number F 034 057 6ND
61-3510GRN Prism carrier with optical plummet and Leica® type mounting stud.Sensitive, adjustable vial, precision ground to an accuracy of 2 arc seconds. Rotating, green.
Suitable for Tribrachs with Wild/Leica® system claw adapter
Part number F 034 057 8N1
61-3520 Wild system prism carrier.Without plummet. Fixed. With Leica® type mounting system.
Suitable for Tribrachs with Wild/Leica® system claw adapter
Part number F 034 057 8N7
61-4500BLK Tribrach with optical plummet.Black.
Suitable for Theodolites and total stations
Part number F 034 057 2N0
61-4635BLK Tribrach with laser plummet.Laser plummet < 2 mm at 2 m. Black.
Suitable for Theodolites and total stations
Part number F 034 057 4N1
67-4260, 67-4260X Bipod for prism poles with diameter of 25–38 mm.Aluminium, weight of 2.1 kg.
Suitable for Prism poles
Part number 67-4260 F 034 056 3N4 Quick-release clamp
67-4260X F 034 056 3N7 Thumb-release clamp
Adapters
Double right angle penta prism
Shop the largest selection of reliable hand tools in our online store.