Full Product Line Cataloque 2010 Split-type_air_conditioners

8/11/2019 Full Product Line Cataloque 2010 Split-type_air_conditioners

1/268


2/268

The Mitsubishi Electric Group promotes sustainable development and is

committed to protecting and restoring the global environment through technology,

through all its business activities, and through the actions of its employees.

Core Environmental Policy

Doing Our Part to

Create a Better Future for All...


3/268

Heat pump technology inspires Mitsubishi Electric to design air conditioners

that harmonize comfort and ecology.

Mitsubishi Electric reflects the essence of this policy andvision in all aspects of its air conditioner business as well.

Preventing Global Warming

1. All models are designed for RoHS and WEEE compliance.*2. Mitsubishi Electric develops downsizing technology to reduce materials

use.

*WEEE and RoHS directives: The Waste Electrical and Electronic Equipment (WEEE)Directive is arecycling directive for this type of equipment, while the Restrictions of Hazardous Substances(RoHS)Directive is an EU directive restricting the use of six specified substances in electronic andelectrical devices. In the EU, it is no longer possible (from July 2006)to sell products containing anyof the six substances.

- PUHZ-RP200/250YKA2: Volume reduction approx. 60% compared toPUHZ-RP200/250YHA

- MUZ-HC25/25VA: Volume reduction approx. 25% compared toMUZ-HA25/35VA

Creating a Recycling-Based Society

In striving to heighten the eco-awareness of its employees, Mitsubishi Electric

provides education in RoHS, WEEE and other environmental regulations, along

with environmental education targeting second and third-year workers.

Ensuring Harmony with Nature/

Fostering Environmental Awareness

1. Inverter

2. i-see Sensor

3. Flash Injection

Comfort Ecology

Faster start-up and morestable indoor temperaturethan non-inverter units.

Fewer On/Off operationsthan with non-inverter, savingenergy.

Monitoring the temperaturegaps between the floor andthe set temperature to preventdeficient warming.

Optimum control of the airflow toprevent excessive compressoroperation for more efficientheating operation.

Achieves high heatingcapacity even at lowtemperatures, plus fasterstart-up compared toconventional inverters.

Expands the region covered byheat pump heating system.

Mitsubishi Electric develops technologies to balance comfortand ecology, achieving greater efficiency in heat pump operation.

Heat Pump Principle (When Heating) Refrigerant and Heat Circulation

Outdoors

4kWHeat absorbed

from the air

Indoors

Expansion valve expandsrefrigerant to lower the temperature

Compressor

Expansion valve

Evaporator Condenser

Compressor compressesrefrigerant to raisethe temperature 1kW

Electrical Energy Input

5kWHeat output

Output energy is quintupleof input energy

4kWHeat Absorbed from the air

5kWHeat Output

5oC 50oC

80oC10oC

60oC60

oC

1kW

20oC

30oC 40

oC

Electrical

Energy Input

Electrical

Energy Input

Heat


4/2683

CONTENTS


5/2684

LINE-UP LIST

FEATURES

M SERIES

S SERIES

P SERIES

POWERFUL HEATING SERIES

MXZ SERIES

OPTIONAL PARTS

EXTERNAL DIMENSIONS

PIPING INSTALLATION

FEATURES & SPECIFICATIONS

FEATURES & SPECIFICATIONS

005-008

009-024

025-044

045-050

051-082

083-092

093-220

221-226

227-242

243-247

249-254

255-266

Air Conditioners

AIR-TO-WATER

LOSSNAY SYSTEM


6/2685

INVERTER Models

FIXED-SPEED Models (Heat Pump & Cooling Only)

INVERTER Models

M SERIES

S SERIES

PageModel Name1.5kW

1-phase

2.0kW

1-phase

8.0kW

1-phase

Page5.0kW4.2kW3.5kW2.5kW2.2kW2.0kW

Model Name6.0kW 7.1kW 8.0kW

SINGLE SINGLE SINGLE

SINGLE SINGLE

SINGLE

SINGLE

SINGLE

SINGLE

SINGLE

SINGLE SINGLE SINGLE

SINGLE

6.0kW

1-phase

SINGLE

7.1kW

1-phase

SINGLE

LINE-UP

Wall-mounted

Wall-mounted

Compactfloor

1-waycassette

MSZ-F Series

MFZ Series

MLZ Series

MSZ-G Series

MSZ-H Series

H: Outdoor unit with anti-freeze heater is available.

S: Indoor units are available in two colours; Silver or White.

Page5.0kW4.2kW3.5kW2.5kW

Model Name6.0kW 7.1kW 8.0kW

1-phase1-phase1-phase1-phase1-phase1-phase 1-phase 1-phase 1-phase

1-phase1-phase1-phase1-phase 1-phase 1-phase 1-phase

2 x 2cassette

Compactceiling-concealed

SLZ Series

SEZ Series

MSZ-S Series

4.2kW

1-phase

SINGLEH

3.5kW

1-phase

SINGLE

SINGLEH

SINGLES

SINGLEH

MXZconnection

only

5.0kW

1-phase

SINGLEH

SINGLES

SINGLE

NEW NEW

NEW NEW

MXZconnection

only

2.5kW

1-phase

SINGLE

SINGLEH

SINGLEH

SINGLES

MXZconnection

only

2.2kW

1-phase

MXZconnection

only

MXZconnection

only

MXZconnection

only

L L L

L L L L L

L: Indoor units are available in two types; with wired remote controller or with wireless remote controller.

MS(H)-G Series

27

31

31

33

35

41

43

39 40

39 40

47

49


7/2686

INVERTER Models

INVERTER Models

MXZ SERIES

POWERFUL HEATINGSERIES

Page

Page

12.5kW10.0kW7.1kW5.0kW3.5kW2.5kW

3-phase1- & 3-phase1-phase1-phase1-phase1-phase

14.0kW

10.0kW

8.0kW

7.1kW

5.4kW

5.2kW

4.0kW

3.0kW

Model Name

Wall-mountedCapacity ClassModel Name

ZUBADAN

4-way cassette

PLA Series

MSZ-FD VABH Series

Wall-mounted

Floor-standing Cassette

MSZ-FD25/35/50

MSZ-GE22/25/35/42/50/60/71

MSZ-SF15/20

MSZ-FD25/35/50

MSZ-GE22/25/35/42/50/60/71

MSZ-SF15/20

MSZ-FD25/35/50

MSZ-GE22/25/35/42/50/60/71

MSZ-SF15/20

MSZ-FD25/35/50

MSZ-GE22/25/35/42/50/60

MSZ-SF15/20

MSZ-FD25/35/50

MSZ-GE22/25/35/42/50

MSZ-SF15/20

MSZ-FD25/35

MSZ-GE22/25/35

MSZ-SF15/20

MSZ-FD25/35

MSZ-GE22/25/35MSZ-SF15/20

MSZ-FD25

MSZ-GE22/25

MSZ-SF15/20

up to 4 indoor unit

MXZ-4B80VA

up to 4 indoor unit

MXZ-4B71VA

up to 3 indoor unit

MXZ-3B54VA

up to 2 indoor unit

MXZ-2B52VA

up to 2 indoor unit

MXZ-2B40VA

up to 2 indoor unit

MXZ-2B30VA

up to 8 indoor unit

MXZ-8A140VA

up to 5 indoor unit

MXZ-5B100VA

MFZ-KA25/35/50

MLZ-KA25/35/50

SLZ-KA25/35/50

PLA-RP35/50/60/71

MFZ-KA25/35/50MLZ-KA25/35/50

SLZ-KA25/35/50

PLA-RP50/60/71

MFZ-KA25/35/50

MLZ-KA25/35/50

SLZ-KA25/35/50

PLA-RP50/60/71

MFZ-KA25/35/50

MLZ-KA25/35/50

SLZ-KA25/35/50

PLA-RP50/60

MFZ-KA25/35/50

MLZ-KA25/35/50

SLZ-KA25/35/50

PLA-RP50

MFZ-KA25/35MLZ-KA25/35

SLZ-KA25/35

MFZ-KA25/35MLZ-KA25/35

SLZ-KA25/35

MFZ-KA25MLZ-KA25

SLZ-KA25

Ceiling-concealed Ceiling-suspended

SEZ-KD25/35/50/60/71

SEZ-KD25/35/50/60/71

SEZ-KD25/35/50/60/71

SEZ-KD25/35/50/60

SEZ-KD25/35/50

PCA-RP50/60/71

PCA-RP50/60/71

PCA-RP50/60

PCA-RP50

SEZ-KD25/35

SEZ-KD25/35

SEZ-KD25

SINGLE

TWIN

SINGLE

TWIN

SINGLE

TWIN

H: Anti-freeze heater included as standard equipment.

S: Indoor units are available in two colours; Silver or White.

Model Change Icon

New indoor & outdoor units

New indoor unit

New outdoor unit

Indoor Combinations

1 outdoor unit & 1 indoor unit

1 outdoor unit & 2 indoor units



SINGLE

TWIN

TRIPLE

QUADRUPLE

NEW

NEW

NEW

PKA Series

Wall-mounted SINGLE

TWIN

SINGLES

SINGLES

SINGLES

H H H

85

85

85

87

95

95

95

95

6.8kW

MSZ-FD25/35/50

MSZ-GE22/25/35/42/50/60

MSZ-SF15/20

up to 3 indoor unit

MXZ-3B68VAMFZ-KA25/35/50

MLZ-KA25/35/50

SLZ-KA25/35/50

PLA-RP50/60

SEZ-KD25/35/50/60 PCA-RP50/60 95

95

95

95

95

PEAD-JA SeriesCeiling-concealed

SINGLE

TWIN

SINGLE

TWIN

SINGLE

TWIN

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW


8/268


9/268


10/2689

INVERTER TECHNOLOGIESMitsubishi Electric inverters ensure superior performance including the optimum control of operation frequency. As a result,

optimum power is applied in all heating/cooling ranges and maximum comfort is achieved while consuming minimal energy.

Fast, comfortable operation and amazingly low running cost Thats the Mitsubishi Electric promise.

Inverters electronically control the electrical voltage, current and frequency of electrical devices such as the compressor motor in an air conditioner.

They receive information from sensors monitoring operating conditions, and adjust the revolution speed of the compressor, which directly

regulates air conditioner output. Optimum control of operation frequency results in eliminating the consumption of excessive electricity and

providing the most comfortable room environment.

Quick & Powerful

Increasing the compressor motor speed by controlling the operation

frequency ensures powerful output at start-up, brings the room

temperature to the comfort zone faster than units not equipped with

an inverter. Hot rooms are cooled, and cold rooms are heated faster

and more efficiently.

Room Temperature Maintained

The compressor motor operating frequency and the change of room

temperature are monitored to calculate the most efficient waveform

to maintain the room temperature in the comfort zone. This elimi-

nates the large temperature swings common with non-inverter sys-

tems, and guarantees a pleasant, comfortable environment.

INVERTERS HOW THEY WORK

Impressively low operating cost is a key advantage of inverter air

conditioners. Weve combined advanced inverter technologies with

cutting-edge electronics and mechanical technologies to achieve a

synergistic effect that enables improvements in heating/cooling per-

formance efficiency. Better performance and lower energy con-

sumption are the result.

ECONOMIC OPERATION

Simple comparison of air conditioner operation control with and without inverter.

TRUE COMFORT

Inverter Operation Image (cooling mode)

[Energy Efficiency Comparison]

Non-InverterMSH-GE25VB

Deluxe-InverterMSZ-FD25VA

Non-InverterMSH-GE25VB

Deluxe-InverterMSZ-FD25VA

3.23

5.15 5.25

3.66

59%UP

43%UP

Cooling (EER) Heating (COP)

Temperature (C) Cooling capacity (W)

Operation time (min)

Rated capacity

Setting temperatureIndoor temperature

Measured capacity

Point 1

Point 1

When room temperature is higher than the

setting, capacity rises for the quickly adjust-

ing the temperature to the original setting.

When room temperature reaches the desired

setting, capacity eases in order to maintain

the set temperature level.

Point 2

Point 2


11/26810

Vector-Wave Eco Inverter

This inverter monitors the varying compressor motor frequency and

creates the most efficient waveform for the motor speed. As the

result, operating efficiency in all speed ranges is improved, less

power is used and annual electricity cost is reduced.

Inverter size has been reduced using insert-

molding, where the circuit pattern is molded into

the synthetic resin. To ensure quiet operation,

soft PWM control is used to prevent the metallic

whine associated with conventional inverters.

Sine-wave drive soft PWMSmooth wave pattern

MORE ADVANTAGES WITH MITSUBISHI ELECTRIC

Grooved Piping

High-performance grooved piping

is used in heat exchangers to in-

crease the heat exchange area.

Magnetic Flux Vector Sine Wave Drive

This drive device is actually a microprocessor that converts the com-

pressor motors electrical current waveform from a conventional wave-

form to a sine wave (180conductance) to achieve higher efficiency by

raising the motor winding utilisation ratio and reducing energy loss.

Reluctance DC Rotary Compressor

Powerful neodymium magnets are used in the rotor of the reluc-tance DC motor. More efficient operation is realised by strong mag-

netic and reluctance torques produced by the magnets.

DC compressor

motor ( rotor )

Neodymium

magnets

Magnetic torque

+Reluctance torque

Highly Efficient DC Scroll CompressorHigher efficiency has been achieved by

adding a frame compliance mechanism

to the DC scroll compressor. The mecha-

nism allows movement in the axial direc-

tion of the frame supporting the cradle

scroll, thereby greatly reducing leakage

and friction loss, and ensuring extremely

high efficiency at all speeds.

2002JSRAE

TECHNOLOGY AWARD

2002JSRAE

TECHNOLOGY AWARD

Japan Society of

Refrigerating and Air

Conditioning Engineers

Thrust gas power (minimum)

Cradle scrollFrame

Secondary back-pressure chamberminimises thrust friction loss

Primary back-chamber minimisesleakage loss

Thrust friction loss (minimum)

Leakage loss (minimum)Fixed scroll

Frame canmove in direction

of axis

Substantialreduction in leakage

and friction loss

Rare Earth Magnet Rotor (Compressor)

An innovative motor with a rare earth magnet rotor is equipped in the

compressor to ensure excellent efficiency. The rare earth magnet

has a residual magnetic flux density

threefold that of the previously used

ferrite magnet.

Rare earth magnet

(for MSZ-FDI)

DC Fan Motor

A highly efficient DC motor drives the fan of the outdoor unit.

Efficiency is much higher than an equivalent AC motor.

Joint Lap DC Motor

Mitsubishi Electric has developed a unique motor,

called the Poki-Poki Motor in Japan, which is

manufactured using a joint lapping technique.

This innovative motor operates based on a high-density, high-magnetic force, leading to extremely

high efficiency and reliability.

Grooved piping

Cross-sectional viewPipe image

PAM

Conventionalinverter

Without PAMcontrol

Merits of PAMControl

With PAMcontrol

Supplyvoltage

CurrentTime

Time

PAM adjusts theform of the current wave so thatitbecomes close tothat ofthe supply

voltage wave. High harmonics arereducedand 98%of the electricity isutilized.

PAM is a technology that controls the current waveform so that it

resembles the supply voltage wave, thereby reducing loss and real-

ising more efficient use of electricity. Using PAM control, 98% of the

input power supply is used effectively.

PAM (Pulse Amplitude Modulation)

Power increasedEfficient voltage increaserealises increased power

Significant energy savings

Remarkable reduction in powerloss saves electricity

Limited powerInsufficient powerwhen needed

Limited energy savingsElectricity is wasted

LEV1

Powerreceiver

Heatexchanger

Heatexchanger

Compressor

LEV2

Power Receiver and Twin LEV Control

Mitsubishi Electric has developed a power receiver and twin linear

expansion valves (LEVs) circuit that optimise compressor perfor-

mance. This technology ensures optimum control in response to op-

erating waveform and outdoor temperature. Operating efficiency has

been enhanced by tailoring the system to the characteristics of R410Arefrigerant.


12/2681

FUNCTIONS

Felt Temperature Control

The i-see Sensor sweeps from side-to-side automatically monitor-

ing the floor temperature over a wide area spanning 150.

Econo Cool Energy-Saving Feature

Econo Cool is an intelligent temperature control feature that adjusts

the amount of air directed towards the body based on the air-outlet

temperature. The setting temperature can be raised by as much as

2C without any loss in comfort, thereby realising a 20% gain in

energy efficiency. (Function only available during manual cooling operation.)

The I Feel fuzzy-logic control memorises the most desirable temperature

setting. If the TOO WARM or TOO COOL button on the remote con-

troller is pressed, the system adds the choice to the control memory and ad-

justs the temperature so that the most comfortable temperature is pro-

vided. That temperature setting is used the next time the unit is turned on.

Pure White

Pure white is adopted for the unit colour; white expressing the

essence of cleanliness and easily matching virtually all interior dcor.

Auto Vane

The vane closes automatically when the air conditioner is not

running, concealing the air outlet and creating a flat surface that is

aesthetically appealing.

Econo Cool Mode

A comfortable room environment is maintained even when setting thetemperature 2C higher than the conventional cooling mode.

Conventional air conditioners monitor the air temperature at the top

of a room to control room temperature and fail to take foot-level tem-

perature, that which has the strongest impact on room comfort, into

consideration. The i-see Sensor monitors the floor temperature and

estimates the felt temperature (i.e., the temperature felt by people

in the room). The airflow speed and temperature are adjusted to

prevent over-heating/cooling, thereby eliminating the consumption

of excessive electricity.

CoolingFloor-level temperatureis monitored to preventexcessive cooling.

HeatingFloor-level temperatureis monitored to determineif heating is needed.

Wide Detection

Conventional Econo Cool

Ambient temperature 35C 35C

Set temperature 25C 27C

30C 29.3C

Econo Cool on Conventional cooling mode

14 16 18 20 22 24 26 28

Perceived temperature

Temperature distribution (C)

SW7-1

OFF

ON

OFF

SW7-2

OFF

OFF

ON

Energy consumption

0% (STOP)

50%

75%

I Feel Control

Demand Function (Onsite Adjustment)

Area Temperature Monitor

The i-see Sensor monitors the whole room in sections and directs the

airflow to areas of the room where the temperature does not match the

temperature setting. (When cooling the room, if the middle of the room is

detected to be hotter, more airflow is directed towards it.) This eliminates

unnecessary heating /cooling and contributes to lower electricity costs.

Daytime Warmerarea

Coolerarea

Nighttime

Cooling mode

The demand function can be activated when the unit is equipped

with a commercially available timer or an On/Off switch is added to

the CNDM connector (option) on the control board of the outdoorunit. Energy consumption can be reduced up to 100% of the normal

consumption according to the signal input from outside.

[Example: Power Inverter Series]

Limit energy consumption by changing the settings of SW7-1 and

SW7-2 on the control board of the outdoor unit. The following set-

tings are possible.

ENERGY-SAVING

ATTRACTIVE

Example: MSZ-FD Series


13/26812

Plasma Duo

Units are equipped with a pre-filter and two special filters that per-

form plasma air cleaning and plasma purification functions (Plasma

Duo). The plasma system remove bad odours and bacterial particu-

lates of micron- and nanometre-size from the air.

Wide and Long Airflow

The wide and long airflow function is especially beneficial for large spaces, helping to ensure that air is well circulated and reaches every corner

of the room.

Wide Airflow

This unique airflow system distrib-

utes air horizontally over a wide-

ranging 150in heating mode and

100in cooling mode. Simply press

the Wide Swing icon on the

remote controller to select the de-

sired airflow from seven different

patterns.

Spot airflow (5 patterns)

SWING

Area specif ic Full a ir flow

Long Airflow

Use this function to ensure that

the airflow circulates to areas far

across the room. Press the Long

Airflow icon on the remote control-

ler to extend reach up to as far as

12 metres from the unit.

AIR QUALITY

AIR DISTRIBUTION

This high-performance filter has a much finer mesh compared to stan-

dard filters, and is capable of capturing minute particulates floating inthe air that were not previously caught.

High-efficiency Filter

The filter is charged with static electricity, enabling it to attract and

capture dust particulates that regular filters dont.

Air Cleaning Filter

Catechin is a bioflavonoid by-product of green tea with both antiviral

and antioxidant qualities. It also has an excellent deodorising effect,

which is why Mitsubishi Electric uses the compound in its air condi-

tioner filters. In addition to improving air quality, it prevents the

spreading of bacteria and viruses throughout the room. Easily re-

moved for cleaning and maintenance, when the filter is washed regu-

larly the deodorising action is rated to last more than 10 years.

Catechin Filter

Indoor air quality is enhanced by the direct intake of fresh exterior air.

Fresh-air Intake

The anti-allergy enzyme filter works to trap allergens such as molds

and bacteria and decompose them using enzymes retained in the

filter.

Anti-allergy Enzyme Filter

The air outlet vane swings up and down so that the airflow is spread

evenly throughout the room.

Horizontal Fin

The air outlet fin swings from side to side so that the airflow reaches

every part of the room.

Vertical Fin

The oil mist filter prevents oil mist from penetrating into the inner part

of the air conditioner.

Oil Mist Filter

A special process for the entrapment surface improves the filtering

effect, making the maintenance cycle longer than that of units

equipped with conventional filters.

Long-life Filter

Air conditioner operating time is monitored, and the user is notifiedwhen filter maintenance is necessary.

Filter Check Signal

This function features both the Air Cleaning Filter and Anti-allergy

Enzyme Filter.

Electrostatic Anti-allergy Enzyme Filter

In the case of rooms with high ceilings, the outlet-air volume can be

increased to ensure that air is circulated all the way to the floor.

High Ceiling Mode

If the room has a low ceiling, the airflow volume can be reduced for

less draft.

Low Ceiling Mode

The airflow speed mode adjusts the fan speed of the indoor unit

automatically according to the present room conditions.

Auto Fan Speed Mode

The filter has a large capture area and incorporates nanometre-sized

platinum-ceramic particles that work to kill bacteria and deodourise

the circulating air.

Nano Platinum Filter ElectrostaticAnti-allergyNano

Platinum


14/268


15/26814

Rotation, Back-up and 2nd Stage Cut-in Functions

(1) Rotation and Back-up Functions

Function Outline

to a rotation interval setting.

-

(2) 2nd Stage Cut-in Function

Function Outline -

perature and predetermined settings.

setting, the standby unit starts (2-unit operation).

predetermined setting, the standby unit stops (1-

unit operation).

System Constraint

System Sample

Operation Pattern

System Image

O/U : Outdoor unitI/U : Indoor unitR/C : Wired remote controller

Operation Pattern

[Back-up function only]

Start operation

Error occurs on main unit.

Main Sub

[Rotation function] & [Back-up function]

(Ex: When the request code is 3 13, each unit operates alternately in daily cycle.)

Start operation

128 days 128 days

Main Sub Sub Main

Error occurs on main unit.

Main Sub

MainunitI/U-1

SubunitI/U-2

Run

Stop

Abnormal condition

Run

MainunitI/U-1

SubunitI/U-2

Run Stop Run

Stop

Abnormal condition

Run Stop Run

[2nd stage cut-in function]

Start operation

Room temp. >=Set point

Sub unit starts operation

Room temp. >=Set point 4C

Sub unit stops

MainunitI/U-1

SubunitI/U-2

Run

Stop Run Stop

O/U-1 O/U-2

I/U-1

R/C

I/U-2

Subunit

Mainunit

SYSTEM CONTROL

PAR-21MAA Control

Centralised On/Off Control

controller, which can control the On/Off function for a maximum of

eight indoor units.

COMPO (Simultaneous Multi-unit Operation)

(Depending on the unit combination, connection of up to four units is

possible; however, all indoor units must operate at the same settings.)

System Group Control

status of up to 16 refrigerant systems.

MXZ Connection

M-NET Connection

controllers) such as the AG-150A.


16/2685

FUNCTIONS

Cleaning-free Pipe Reuse

Reuse of Existing Wiring

The application of pipe reuse technology such as Mitsubishi Electrics original hard alkyl benzene oil makes it possible to reuse the same piping,

thereby allowing cleaning-free renewal of air conditioning systems that use R22 refrigerant.

The wiring method has been improved, making it possible to use methods different from that utilized for control and power supply. Units are

compatible with the dual harness control line/power line method and the separate power supply method. Using a power-supply terminal kit, wire

can be efficiently reused at the time of system renewal regardless of the method the existing system uses.*Optional. Usage may be limited due to wiring type diameter.

Wiring/Piping Correction Function*

The push of a single button is all that is required to confirm that

piping and wiring are properly connected. Corrections are made au-

tomatically if a wiring error is detected, eliminating the need for com-

plicated wiring confirmation work when expanding the number of

rooms served.

*This function cannot be used when the outdoor temperature is below 0C.

The correction process requires 1015 minutes, and only works when the unit is set

to the Cooling mode.

Drain Pump

A built-in drain pump enables drain piping to be raised.

Pump Down Switch

Enables smooth and easy recovery of refrigerant. Simply press the

Flare Connection

Flare connection to cooling pipe work is possible.

Wiring recycling problem solved! Compatible with other wiring connection methods*

Single Harness Control/Power Line Method(Current method)

Indoor unit (factory-shipped condition) Indoor unit (factory-shipped condition)

Indoor unitControl board

PowerIndoor/Outdoor unit

communication

JunctionconnectorOutdoor unit

Indoor unit

Outdoor unit

to power

L N S1 S2 S3

S1 S2 S3Control/Power3 cores

Control/Power3 cores

Power supply

Dual Harness Control Line/Power Line Method

Control board

Junction connectorsreplaced


communication

S1 S2 S3

S1 S2 S3Power2 cores

Control2 cores

Power supply

Separate Power Supply Method

INSTALLATION

Pump Down Switch

stop refrigerant recovery

operation automatically.

(Valve in refrigerant circuit

is opened/closed.)

Outdoor unit control circuit board

Wiringconfirmation

istimeconsuming.

The outdoor unitmatches

pipesand wiring.

to power

L N

L N

Indoor unit

Outdoor unit

Control board

Junction connectorsreplaced


communication

S1 S2 S3

S1 S2 S3Control2 cores(polarised)

Power supply

Power supply

to power

to power

L N

L NPower2 cores

Control2 cores

Control2 cores

Built-in drain pump efficiently

pumps out water

Power supply terminal kit (optional)Power supply terminal kit (optional)


17/26816

Electricity billincreases by

5%*

Electricity billincreases by

25%*

Open the vents and reach into clean the fan

Exclusive Quick Clean Kit (Optional)

cleaner for quick and easy cleaning of the heat exchanger.*

*It is highly recommended that rubber gloves be worn when cleaning the heat exchanger.Touching it with bare hands may lead to injury.

Mitsubishi Electrics Quick Clean Body prevents increases

in electricity cost by as much as 30%*

Always clean the heat exchanger, fan, and air vent to ensure proper perfor-mance and economical operation.

*Electricity cost comparison of operation between two units at a fixed temperature;

one with 8g of dirt on one fan and the other fan clean. Based on in-house data.

Fan Air vent

Quick Clean Body

The cover panel can be quickly removed for washing and the airflow vents can be opened without any special tools, making it easy to clean the

energy savings.

-

method to promote the reduction of CO2emissions. The European

Commission is confident that this labeling program will contribute to

educating companies and the public as to the vital importance of un-

derstanding energy consumption, thereby leading consumers to pur-

chase products that are both efficient and environmentally friendly.

Each label contains information pertaining to the amount of energy

consumed by the unit. Air conditioners with cooling capacities of

under 12kW are split into seven categories (A-G). Each category is

classified according to energy consumption (i.e. the Energy Effi-

-

cient, symbolized by a green arrow on the label. Less efficient units

are classified in order of efficiency, with the least efficient units be-

longing to Category G, the label of which is marked with a red arrow.

This enables consumers to easily identify the more efficient units

when they are comparing brands and units at the time of purchase.

MAINTENANCE

ENERGY LABELING

(These classifications are for Split and Multi-Split type air conditioners.)

Energy Labeling of Air Conditioners

Outdoor unitIndoor unit

More efficient

Less efficient

Annual energy consumption,

kWh in cooling mode(Actual consumption will dependon how the appliance is usedand climate.)

Energy efficiency ratioFull load (the higher the better)

Type Cooling only Cooling + Heating

Air cooled Water-cooled

Heat output kW

Heating performanceA: higher G: lower

Noise(dB(A) re 1 pW)

Further information is containedin product brochures.

All air conditioners with the cooling capacity under 12kW are concerned.

Directive defines for each type of product the energy class going from A (more efficient)

to G (less efficient).

The energy efficiency class is determined in accordance with the following tables.

Norm EN 814Air conditionerEnergy Label Directive 2002/31/EC

Classifications

Energy Efficiency ClassIn cooling mode

A 3.20 < EER

B 3.20 >EER > 3.00

C 3.00 >EER > 2.80D 2.80 >EER > 2.60

E 2.60 >EER > 2.40

F 2.40 >EER > 2.20

G 2.20 >EER

Energy Efficiency ClassIn heating mode

A 3.60 < COP

B 3.60 >COP > 3.40

C 3.40 >COP > 3.20D 3.20 >COP > 2.80

E 2.80 >COP > 2.60

F 2.60 >COP > 2.40

G 2.40 >COP

ProductAir Conditioners

A B C 1 2 3A B C 1 2 3

A

X.Y

X.YX.Y

X.Y

A BCD E F G

Model Name

Energy Efficiency Class

Annual Energy Consumption

The Annual Energy Consumption is calculated with the total input

power multiplied by an average of 500 hours per year in cooling

mode at full load.

Energy Efficiency Ratio

Higher EER means better energy efficiency.

Type of Air Conditioner

A

BC

D

E

G

Energy

AIR CONDITIONING SYSTEMSManufacturer

F

Cooling output kW

Self-diagnostic Function (Check Code Display)

Check codes are displayed on the remote controller or the operation

indicator to inform the user of malfunctions detected.

Failure Recall Function

Operation failures are recorded, allowing confirmation when needed.


18/2687

FEATURES

Opt

Opt

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

*1

Opt

Opt

Opt

Opt

*2

80

*1

80

Opt

Opt

Opt

Opt

*2

80

*1

Opt

Opt

Opt

Opt

*2

Opt

*1

Opt

Opt

Opt

Opt

*2

80

Opt

Opt

Opt

Opt

Opt

*1

Opt

Opt

Opt

Opt

22-50*2

*1

Opt

Opt

Opt

Opt

22-50*2

*1

80

Opt

Opt

Opt

Opt

*2

80

*1

Opt

Opt

Opt

Opt

*2

*1

Opt

Opt

Opt

Opt

*2

Opt22-50

Opt22-50

Opt22-50

Opt22-50

Opt22-50

Opt22-50

Opt60/71

Opt60/71

Opt60/71

Opt60/71

Opt60/71

22-50 22-50 22-50 22-50 22-50 22-50

60/71 60/71 60/71 60/71

60/71 60/71 60/71 60/71

*1

Opt

Opt

Opt

Opt

*2

*1

Opt

Opt

Opt

Opt

*2

80

*1

80

Opt

Opt

Opt

Opt

*2

80

*1

Opt

Opt

Opt

Opt

*2

Opt

*1

Opt

Opt

Opt

Opt

*2

35

Opt

Opt

Opt

Opt

Opt

Opt

DC Inverter

Joint Lap DC Motor



Highly Efficient DC Scroll Compressor

Rare Earth Magnet Rotor(Compressor)

DC Fan Motor


PAM(Pulse Amplitude Modulation)


Grooved Piping

Felt Temperature Control (i-see Sensor)

AREA Temperature Monitor

Econo Cool Energy-saving Feature

'I-Feel' Control

Demand Function

Pure White

Auto Vane

Plasma Duo

Air-cleaning Filter

Fresh-air Intake


Electrostatic Anti-allergy Enzyme Filter


Catechin Filter

Oil Mist Filter

Long-life Filter

Filter Check Signal

Horizontal Fin

Vertical Fin

High Ceiling Mode

Low Ceiling Mode

Auto Fan Speed Mode


On/off Operation Timer

"i save" Mode

Auto Changeover

Auto Restart

Low-temperature Cooling

Low-noise Operation(Outdoor Unit)

Ampere Limit Aoljustment

Operation Lock


PAR-21MAA Control *3

Centraliesd On/Off Control *3

System Group Control *3

M-NET Connection *3

COMPO *4

MXZ Connection



Wiring/Piping Correction Function

Drain Pump

Pump Down Switch

Flare Connection

Quick Clean Body

Self-Diagnosis Function(Check Code Display)


Indoor unit

Outdoor unit

MSZ-FD20/35/50VA(S) MSZ-GE22/25/35/42/50/60/71VA MSZ-SF15/20VAMSC-

GE20/25/35

VB

MSH-GE50

VB

MSH-GA60

VB

MSH-GD80

VB

MSZ-

HC25/35VA(B)

MUZ-FD

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

MUZ-GE

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

MUZ-HC

MUH-GA

MU-GA

MUH-GE

MUH-GA

MUH-GD

M SERIES

Technology

Energy

Saving

Attractive

Air Quality

Air

Distribution

Convenience

System

Control

Installation

Maintenance

Functions

Com

bination

Category Icon

*1 When multiple indoor units connected to an MXZ outdoor unit are running at the same time, simultaneous cooling and heating is not possible.*2 For the possible connectivity of MXZ outdoor units and indoor units, please refer to the list on page 97 for details.

*3 Please refer to "System Control" on pages 23-24 for details.*4 Please refer to page 52 for details.


19/26818

Opt

Opt

Opt

Opt

Opt

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

*1

Opt

Opt

Opt

Opt

*2

80

*1

80

Opt

Opt

Opt

Opt

*2

80

*1

Opt

Opt

Opt

Opt

*2

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

80

Opt

Opt

*1

80

Opt

Opt

Opt

Opt

*2

80

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

Opt

Opt

*1

Opt

Opt

Opt

*2

*1

Opt

Opt

Opt

*2

80

*1

80

Opt

Opt

Opt

*2

80

*1

Opt

Opt

Opt

*2

Opt

*1

Opt

Opt

Opt

*2

Opt

Opt

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

*1

Opt

Opt

Opt

Opt

*2

80

*1

80

Opt

Opt

Opt

Opt

*2

80

*1

Opt

Opt

Opt

Opt

*2

Opt

*1

Opt

Opt

Opt

Opt

*2

71

Opt

Opt

Opt

Opt

*1

Opt

Opt

Opt

*2

Opt

*1

Opt

Opt

Opt

*2

Opt

80

*1

80

Opt

Opt

Opt

*2

80

Opt

*1

Opt

Opt

Opt

*2

Opt

Opt

*1

Opt

Opt

Opt

*2

Opt

MFZ-KA25/35/50VA MLZ-KA25/35/50VA SLZ-KA25/35/50VA SLZ-KA25/35/50VAL SEZ-KD25/35/50/60/71VAMS-

GE50

VB

MU-GE

MS-GA60

VB

MS-GD80

VB

MU-GA

MU-GD

SUZ-KA

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

SUZ-KA

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

SUZ-KA

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

SUZ-KA

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

M SERIES S SERIES

The figures listed in the table are "only when combined with an outdoor unit with the appropriate capacity range". Opt: Separate parts must be purchased.


20/2689

71

Opt

Opt

Opt

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

80

*1

80

Opt

Opt

Opt

Opt

*2

80

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

Opt

*1

Opt

Opt

Opt

Opt

*2

Opt

Opt

Opt

Opt

100/125

Opt

Opt

Opt

35-71

100-250

35-140

Opt

Opt

Opt

Opt

Opt

71-250

Opt

100-140

200/250

100-140

Opt

Opt

Opt

Opt

Opt

Opt

71

Opt

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

Opt

Opt

Opt

*1

Opt

Opt

Opt

*2

80

Opt

Opt

*1

80

Opt

Opt

Opt

*2

80

Opt

Opt

*1

Opt

Opt

Opt

*2

Opt

Opt

Opt

*1

Opt

Opt

Opt

*2

Opt

100/125

Opt

Opt

Opt

35-71

100-250

35-140

Opt

Opt

Opt

71-250

Opt

100-140

200/250

100-140

Opt

Opt

Opt

Opt

71

Opt

Opt

Opt

100

Opt

Opt

Opt

100

Opt

Opt

Opt

DC Inverter

Joint Lap DC Motor



Highly Efficient DC Scroll Compressor

Rare Earth Magnet Rotor(Compressor)

DC Fan Motor


PAM(Pulse Amplitude Modulation)


Grooved Piping

Felt Temperature Control (i-see Sensor)

AREA Temperature Monitor

Econo Cool Energy-saving Feature

'I-Feel' Control

Demand Function

Pure White

Auto Vane

Plasma Duo

Air-cleaning Filter

Fresh-air Intake



Catechin Filter

Oil Mist Filter

Long-life Filter

Filter Check Signal

Horizontal Fin

Vertical Fin

High Ceiling Mode

Low Ceiling Mode

Auto Fan Speed Mode


On/off Operation Timer

"i save" Mode

Auto Changeover

Auto Restart

Low-temperature Cooling

Low-noise Operation(Outdoor Unit)

Ampere Limit Aoljustment

Operation Lock


PAR-21MAA Control *3

Centraliesd On/Off Control *3

System Group Control *3

M-NET Connection *3

COMPO *4

MXZ Connection



Wiring/Piping Correction Function

Drain Pump

Pump Down Switch

Flare Connection

Quick Clean Body

Self-Diagnosis Function(Check Code Display)


Indoor unit

Outdoor unit

SEZ-KD25/35/50/60/71VAL PLA-RP35/50/60/71/100/125/140BA(2/3) PEAD-RP35/50/60/71/100/125/140JA

SUZ-KA

MXZ-2B

MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

PUHZ-HRP

PUHZ-RP

PUHZ-P

SUZ-KA

PUH-P

PU-P MXZ-3B

MXZ-4B

MXZ-5B

MXZ-8A

PUHZ-HRP

PUHZ-RP

PUHZ-P

SUZ-KA

PUH-P

PU-P

P SERIESS SERIES

EnergySaving

Air Quality

AirDistribution

Convenience

SystemControl

Installation

Maintenance

Functions

Category Icon

FEATURES

Combination

Technology

Attractive

*1 When multiple indoor units connected to an MXZ outdoor unit are running at the same time, simultaneous cooling and heating is not possible.*2 For the possible connectivity of MXZ outdoor units an d indoor units, please refer to the list on page 97 for details.

*3 Please refer to "System Control" on pages 23-24 for details.*4 Please refer to page 52 for details.

60-140V200/250

60-140V200/250


21/26820

Opt

Opt

100

Opt

Opt

Opt

100

Opt

Opt

Opt

71

Opt

Opt

Opt

100-140

200/250

100-140

Opt

Opt

Opt

Opt

35-71

100-250

35-140

Opt

Opt

Opt

71-250

Opt

Opt

00/125

Opt

Opt

Opt

Opt

Opt

35-71

100-200

35-140

Opt

Opt

Opt

Opt

Opt

Opt

Opt

71-250

Opt

Opt

100-140

200

100-140

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

100/125

Opt

Opt

Opt

Opt

Opt

Opt

Opt

60-71

100-250

60-140

Opt

Opt

Opt

Opt

Opt

Opt

Opt

71-250

Opt

Opt

100-140

200/250

100-140

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

Opt

Opt

Opt

Opt

50-71

100-250

50-140

Opt

Opt

Opt

Opt

71-250

Opt

Opt

100-140

200/250

100-140

Opt

Opt

Opt

Opt

Opt

Opt

71

Opt

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

Opt

71

100-250

71-140

Opt

Opt

Opt

71-250

Opt

100/125

250

125/140

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

100

Opt

Opt

Opt

71

100-250

71-140

Opt

Opt

Opt

Opt

71-250

Opt

100-140

200/250

100-140

Opt

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

100

Opt

Opt

Opt

Opt

PEAD-RP35/50/60/71/100/125/140JALPEA-

RP200/250/400/500GA

PKA-RP35/50HAL

PKA-RP60/71/100KAL PCA-RP50/60/71/100/125/140KA PCA-RP71/125HA PSA-RP71/100/125/140GA

PUHZHRP

PUHZ-RP

PUHZ-P

SUZ-KA

PUH-P

PU-P PUHZ-RP

PUHZ-P

PUHZ-RP

PUHZ-P

PUHZ-HRP

PUHZ-RP

PUHZ-P

PUH-P

PU-P PUHZ-RP

PUHZ-P

SUZ-KA

Opt

*1

Opt

Opt

*2

Opt

MXZ-3B

80

Opt

*1

80

Opt

Opt

*2

Opt

MXZ-4B

Opt

*1

Opt

Opt

*2

Opt

MXZ-5B

PUH-P

PU-P PUHZ-RP

PUHZ-P

PUH-P

PU-P PUHZ-RP

PUHZ-P

PUH-P

PU-P

P SERIES

If a numerical figure is listed, the feature is only available with the outdoor unit of that capacity. Opt: Optional parts must be purchased.

60-140V200/250

60-140V200/250

60-140V200/250

60-140V200/250

71-140V200/250

71-140V200/250


22/2681

LimitedTemperatureRangeSettings

[Japanese]

[English] [Italian] [German][Spanish]

[Russian] [Chinese][French]

Display Example [Operation Mode]

Dot LCD

Multi-Ianguage

COOL / DRY

Office RestaurantRecommended for

Lower temperature limit

Possible temperature range setting

19(C) 30(C)

30(C)25(C)

To prevent excessive coolingLower temperatures cannotbe selected

Meeting roomRecommended for

Public facility like public hall

Recommend to use in Office School / Private school

Hospital Server room

CONTROL TECHNOLOGIES

Newly Developed Advanced MA Remote Controller

A Progressive Step in the Evolution of Air Conditioning Control

Dot Liquid-crystal Display Adopted

The adoption of dot liquid-crystal display (LCD) technology and a

large display screen for the control panel optimises visibility. Opera-

tion and control status are easily read at a glance.

Operation Control Function

First Multi-language Display in the Industry

Control panel operation in

eight different languages.

Choose the desired language,

among the following languages.

Air conditioner operation restricted to

within a specified operating range

Set the upper and lower limits for the temperature range during op-

eration. Excessive heating or cooling is prevented, leading to in-

creased energy savings.

Auto-offTimer

Automatically turns off

air conditioner

Set the time for the air conditioner to turn off automatically. The

timer can be set in the range from 30 minutes up to 4 hours in 30-

minute intervals.

OperationLock

Prevent operation settings

from being changed

Units can be set so that the operation mode cannot be changed.

When Operation Lock is activated, new temperature setting

commands are not accepted, thereby ensuring that the unit runs in

the specified (locked in) temperature range. This promotes energy

savings and prevents erroneous/ mischievous operation.

The Simple Timerstarts/stops in units of 1 hour in a 72-hour peri-

od is set at the time of shipment from the factory. It can be changed

to the Auto-off Timer function using the remote controller.

Only the administrator can change settings when using the Operation

Lock mode.

Easy To Read & Easy To Use

Energy-efficient Control

PAR-21MAA


23/26822

Busy time Slow time

4

Setting Example (restaurant in summer time)

Economical &

Space Saving

26

25

24

23

22

010 12 14 16 18 20 22 24

Temperaturesetting(C)

Opening time

Lunch time Dinner time

7-pattern setting

Closing time

Set to lower temperature Set to higher temperature

1

2

3 5

6 7

(hr)

(Results of cooperative study with Japan Facility Solution Co., Ltd.)

Setting the temperature 1C

higher for cooling and 1C lower for

heating leads to an energy savings

of approximately 10%. *Based on in-house calculations

Conventional Inspection Work

Easy Maintenance Information

Accumulated operating

time (x10hr)

Number of ON/OFF

times (x100 times)

Operating

current (A)

Heat exchanger

temperature (C)

Discharge

temperature (C)

Outdoor-air

temperature (C)

Intake-air

temperature (C)

Heat exchanger

temperature (C)

Filter operating

time* (hr)

Outdoor UnitCompressor Indoor Unit

1

2

3

4

5

6

7

8

9

*The filter operating time is the time elapsed since the filter button was reset.

Discharge temperature 64C

Indoor Unit Outdoor Unit

Remove theservice panel

Measurethe intake-air

temperature

Measure the discharge

temperature

Measure the outdoor-

air temperature

Weekly Timer

Introduced in Response to Market Demand

Control temperature on a weekly basis

Temperature settings and On/Off control can be managed over a

period of one week using the Weekly Timer. Up to eight setting pat-

terns per calendar day are possible.

Easy Maintenance Function (Mr. Slim Power Inverter only)

Remote controller also lets you set the operating frequency, allowing easier inspection.

Refrigerant Leakage Check (Mr. Slim Power Inverter only)

The Mr. Slim Power Inverter units come equipped with a useful new Refrigerant Leakage Check function. Using a

wired remote controller, it is easy to check if refrigerant has been lost over a long period of use. This reduces service

time and gives an added sense of safety.

PAR-20MAA

Conventional MA

Remote Controller

PAC-YT34STA

Schedule

Timer PAR-21MAA

Remote Controller

Approximate10%Energy Savings


24/2683

SYSTEM CONTROLVersatile system controls can be realised using optional parts, relay circuits, control panels, etc.

MAJOR SYSTEM CONTROL

M Series Indoor Unit

M Series and MXZ Series Outdoor

Indoor Unit

Outdoor Unit

S Series & P Series Indoor Unit

System Examples

S Series and MXZ Series Outdoor

P Series Indoor Unit

P Series Outdoor

Details

Major Optional Parts Required

Details


Details


indoor unit

Standard equipment (for indoor units compatible with wired remote controllers)

Details


Outdoor unit

Indoor unit

MAC-399IF-E

ME remote controller

(PAR-F27MEA)

Power supplyunit

City Multiindoor unit

Indoor unit

Indoor unit MAC-821SC-E

MAC-397IF-E

Outdoor unit

Outdoor unit

Outdoor unit

Outdoor unit

PAR-21MAA

MAC-397IF-E

PAR-21MAA

PAR-21MAA Control

System Group Control

Centralised On/Off Control

M-NET Connections

Indoor unit

Indoor unit MAC-821SC-E

MAC-397IF-E

Outdoor unit Outdoor unit

Outdoor unit Outdoor unit

PAR-21MAA

Outdoor

unit

Indoor unit

MAC-399IF-Esystem controller

system controller etc)

Power supplyunit

City Multiindoor unit

PAR-21MAA

Outdoor

unit

Indoor unit

PAR-21MAA

PAC-SF81MA-E

system controller

Power supplykit

PAR-21MAA

PAR-21MAA

Indoor unitIndoor unit

PAR-21MAA

MAC-397IF-E

Indoor unit

Outdoor unit

Indoor unit

Outdoor unit

Outdoor unit

Indoor unit

MAC397IF-E

PAR-21MAA


25/26824

OTHERS

2-remote ControllerControl

With two remote controllers, controlcan be performed locally andremotely from two locations.

Operation Control byLevel Signal

Air conditioner can be started/stopped remotely. In addition,On/Off operation by local remotecontroller can be prohibited/permitted.

Operation Control byPulse Signal

Remote Display ofOperating Status

Operating status can bedisplayed at a remote location.

Allows On/Off operation withtimer*For control by an external

timer, refer to B OperationControl by Level Signal.

Timer Operation

PAR-21MAAPAR-21MAA

(Example of 1 : 1 system)


Relay box (to be purchased) locally)

Relay box (to be purchased) locally)

Adapter forremoteOn/Off

Adapter forremoteOn/Off

PAR-SL97A-E

PAR-SL97A-E


PAR-21MAA

(Example of 1 : 1 system x 2)

Relay box (to be purchased locally)


* Set "Main" and "Sub"remote controllers. * When using wired and

wireless remote controllers

PAR-SL97A-E

(Example of Simultaneous Twin)

(Example of Simultaneous Twin)

PAR-21MAA

PAR-21MAAT-E

PAR-SL97A-E (Except for SLZ)

PAR-SL99B-E

PAC-SE55RA-E

locally)

Standard functions of PAR-21MAA

A

B

C

D

E

Details Major Optional Parts Required

System Examples

Wired remote controller Wireless remote controller

Remotedisplaypanel

RemotedisplaypanelPAR-21

MAA

Remotecontrolpanel

RemotecontrolpanelWired remote

controller

connected to one group.

can be used in combination.

ment of temperature, fan speed, and airflow)can be performed even when remotecontroller operation is prohibited.

timer.

Connector

cable forremotedisplay

Connector

cable forremotedisplay

PAR-SL97A-E


Relay box (to be purchased locally)


PAC-SA88HA-E/ PAC-725AD

(10 pcs. x PAC-SA88HA-E)

locally)Remotecontrolpanel

RemotecontrolpanelWired remote

controller

received at a remote location.

received at a remote location (whenchanneled through the PAC-SF40RMno-voltage signal, when channeled throughthe PAC-SA88HA-E DC 12V signal).

Weekly Timer:On/Off and up to 8 pattern temperatures canbe set for each calendar day. (Initial setting)

Simple Timer:On/Off can be set once each within 72 hr inintervals of one hour.

Auto-off Timer:Operation will be switched off after a certaintime elapse. Set time can be changed from30 min. to 4 hr. at 30 min. intervals.*Simple Timer and A uto-off Timercannot be used at the same time.

locally)

PAC-SA88HA-E/ PAC-725AD(10 pcs. x PAC-SA88HA-E)

PAC-SF40RM *Unable to use with wireless remote controller

locally)

Remote operation adapter/Connector cable for remote display +Relay box

Remote operation adapter/Connector cable for remote display +Relay box

For P Series and S Series Indoor Units

For M Series Indoor Units (New A-control Models Only)

1

2

Remote On/OffOperation

Remote Display ofOperation Status

Control Details Major Optional Parts RequiredSystem Examples Connection Details

MAC-397IF (Interface)

box, lead wire, etc. (to bepurchased locally)

MAC-397IF-E(Interface)

purchased locally (DC powersource needed)

Connect the interface to the airconditioner. Then connect thelocally purchased remote controllerto the terminal in the interface.

Connect the interface to the airconditioner. Then connect thelocally purchased remote controllerto the terminal in the interface.

On/Off operation is possible froma remote location.

The operation status(On/Off) or error signals can bemonitored from a remote location.

Outdoor unit

Indoor unit

MAC-397IF-E

Remote control section

(to be purchased locally)

Switch

Outdoor unit

Indoor unit

MAC-397IF-E

Remote monitor section

(to be purchased locally)

Power supply

Resistance LED

stopped remotely.( 1 and 2 can be used incombination)

conditioners can be confirmedremotely.( 1 and 2 can be used incombination)


26/2685

SERIES


27/26826

MSZ-FSERIES MSZ-GSERIES

MSH-GSERIES MS-GSERIES

MFZSERIES MLZSERIES

MSZ-HSERIES

SELECTION

Line-up includes seven series.

Choose the model that best matches room conditions.

SELECT SERIESSTEP 1

Wall-mounted Units

SELECT OUTDOOR UNITSome outdoor units in the line-up have heaters for use in cold regions. Units with an H in the model name are equipped with heaters.

A multiple series line-up to choose from, each with various outstanding features. In addition to inverter-equipped models,

constant-speed, floor-standing and cassette models can be selected. Choose the best series to match usage needs.

Floor-standing/Cassette Units

Heater Installed

Inverter

Super energy-saving

Energy Rank A

Ultra-quiet operation

Cooling and heating operation

Compatible for connection to

MXZ Series system

MXZ connection only

EER

ACOP

A

EERA COPA

Superenergy-saving

Ultra-quiet

CoolingHeating

EER

ACOP

AEER

ACOP

A

EER

ACOP

A

EER

ACOP

AEER

A

To confirm compatibility with the MXZ Series

multi-type system, refer to the MXZ Series page.

STEP 2

Selecting a Heater-equipped Model

In regions with the following conditions, there is a possibility that water resulting from condensation on the outdoor unit when operating in the heating

mode will freeze and not drain from the base.1) Cold outdoor temperatures (temperature does not rise above 0oC all day)

2) Areas where dew forms easily (in the mountains, valleys(surrounded by mountains), near a forest, near unfrozen lakes, ponds, rivers or hot springs),

or areas with snowfall

To prevent water from freezing in the base, it is recommended that a unit with a built-in heater be purchased. Please ask your dealer representative about

the best model for you.

MUZ-GE25/35/42VAH MUZ-GE50VAH SUZ-KA25/35VAH

25/35

20-35 20-35 20/25

25/35 25/35

22-35 VA

Superenergy-saving

Ultra-quiet Cooling

Heating Ultra-quiet

CoolingHeating

CoolingHeating

CoolingHeating

CoolingHeating

CoolingHeating

MXZ connection onlyCoolingHeating

MSZ-SSERIES


28/2687

MSZ-FSERIESThe FD Series is designed for optimum cooling/heating performance as well as operationalcomfort. Quiet, energy-saving operation is supported by some of Mitsubishi Electrics latesttechnologies. Advanced functions such as i-see Sensor temperature control and the PlasmaDuo air filtering and purification system raise room comfort levels to new heights.

MSZ-FD50VA

Fan diameter has been increased, enabling the motor to run at a slow speedwhile maintaining the air volume, thereby contributing to quieter operation.

MSZ-GB50VA

Air inlet ducts have been widened,reducing the pressure loss inthe airflow path.

Small air inlet ducts in the indoorunit result in loss of pressure inthe airflow path.

[Energy Efficiency Comparison]

Size 25

Size 50

Size 35

5.15 5.25

4.20 4.35

5.50

5.00

4.50

4.00

3.50

3.00

5.50

5.00

4.50

4.00

3.50

3.00

4.12

4.62

3.74

4.02

Mitsubishi Electric compressor motors utilize a rotor made

using a rare earth magnet, the magnetic flux density of which is

approximately threefold that of the previous ferrite magnet. This

rare metal magnet provides high density and increased magneticforce, which leads to a reduction in energy consumption.

Magnet is

cut for better

efficiency.

25VA

35VA

Cooling

Heating

Cooling

Heating

MSZ-FD

20dB

20dB

21dB

21dB

21dB

21dB

22dB

22dB

MSZ-FA

1dB less

1dB less

1dB less

1dB less

Line flow fan comparisonSide view of MSZ-FD

MSZ-FD MSZ-FA

EER

ACOP

A

Samarium Magnet Rotor Introducedfor DC Fan Motor of Outdoor Units

The rotor magnet for the DC motors of the

outdoor units has been changed from ferrite

to samarium, which has higher magnetic

flux. Additionally, the magnet is cut and spe-cially shaped for better efficiency.

KEY TECHNOLOGIES

Rare Earth Magnet Rotor for Compressor

Rare Earth Magnet

(for MSZ-FD)

23%UP

21%UP

10%UP

15%UP

MSZ-FD50VA

MSZ-GB50VA

MSZ-FD50VA

MSZ-GB50VA

3.33

3.744.00

3.50

3.00

2.50

2.00

1.50

10%UP

13%UP

Cooling mode Heating mode

3.31

3.03

MSZ-FA25VA

MSZ-FD25VA

MSZ-FA25VA

MSZ-FD25VA

MSZ-FA35VA

MSZ-FD35VA

MSZ-FA35VA

MSZ-FD35VA

Cooling mode Heating mode Cooling mode Heating mode

Quiet Operation

Minimum indoor unit operating noise has been reduced by equip-

ping the unit with a larger blower fan that enables the motor speed

to be reduced without reducing the air conditioning capacity.

High Energy Efficiency Energy Rank A for All Models

Applying the latest inverter

technologies, such as the use

of a rare earth magnet in the

rotor of the DC fan motor, has

resulted in remarkably high en-

ergy efficiency and an Energy

Rank A rating for cooling andheating performance.

Amazingly Quiet Operation Redesigned for Performance

The MSZ-FD50VA has a larger fan diameter, wider air inlet in the upper

section of the indoor unit and a revised airflow path, which has enabled

operation noise to be reduced by 3dB in both cooling and heating modes.

High Energy Efficiency

Power consumption has been reduced by approximately 20% for

the cooling and heating modes thanks to the incorporation of ournewest inverter technologies. The high energy efficiency of the

Size 25 units has obtained a rating of more than 5.0 for both coeffi-

cient of performance (COP) and energy efficiency rating (EER).

Introducing Size 50 Units Equipped

with Deluxe Inverter Series

MSZ-FD25/35/50VA


29/26828

Plasma electrode produces plasma

Plasma gives particulates a negative charge

Positive side of the electret filterattracts the negatively chargedparticulates and enzymes neutralise them

1

2

3

Plasma electrode produces ozone

Odour-causing particulates trapped

Odour-causing particulates decomposed by ozone

1

2

3

FD Series air conditioners are equipped with state-of-the-art air

cleaning technologies including a pre-filter and two plasma-based

filtering mechanisms (Plasma Duo) that virtually deodorise and

purify the air.

A plasma electrode is mounted inside the

indoor unit. An electro-discharge processgenerates ozone and plasma, which then

work together with the two special filters to

produce dynamic plasma air-purifying perfor-

mance.

Plasma Electrode

Plasma electrode located here

Plasma Deodorisation

An electrified anti-allergen enzyme filter is

incorporated. A combination of static elec-

tricity charged into the filter and plasma

generated by the plasma electrode is used

to catch bacteria, pollen and other aller-

gens in the air, which are then neutralised

by the enzymes in the filter.

Plasma Air Purification

Clean air

1

2

3

Dirty air

Plasmaelectrode

Platinumcatalystfilter

Plasma Deodorising Filter

Clean air

Dirty air

Plasmaelectrode

1

2

Electrifiedanti-allergenenzyme filter

Plasma Purifying Filter

3

Deodorising timereduced approx.

50% (compared toFA Series)

A nanometre scale-meshed platinum cata-

lyst deodorising filter catches odourous par-

ticulates that are in the air. Once trapped,

the particulates are decomposed and odours

eliminated by ozone generated from a plasma

electrode.

Dust Allergens Bad Odours

Filterremoves

[ Effective Range ]Macro NanoParticulate size

Plasma Air Purificationremoves

Plasma Deodorisationremoves

BacteriaPollen

Mold spores

Fish odoursPet odours

Pet odours

Food odours

Allergens

Rubbish odours

Having pets indoors cangenerate bad smells

Cooked meats and food scraps

Pollens, molds, etc.remain inside the home,and bacteria can multiply

Standard filterscapture dust in the air,but they cannot catchsmaller particulates.

The FD Series has a plasma-basedsystem with dual functionsair purification and deodorisationthat work to capture smallparticulates that standard filterscannot, and keep indoor-air clean.

Highly insulated, airtight residences tend to trap odours,allergens like pollen and mold, and bacteria generated indaily life inside the home.

Wide Detection

Sensor sweeps from side-to-side automatically monitoring the floor

temperature over a wide area spanning 150.

Conventional air conditioners monitor the air temperature at the top

of a room to control room temperature and fail to take floor-level

temperature, that which has the strongest impact on room comfort,

into consideration. The i-see Sensor monitors floor-level tempera-

ture to ensure that optimum comfort is obtained throughout theroom.Cooling Heating

Cold air migrates to the floor, and this can

result in excessive cooling. The i-see Sensor

monitors the temperature at the floor level

and adjusts the outlet-air temperature to pre-

vent over-chilling.

Warm air migrates to the ceiling, thereby

failing to warm the floor-level zone. The

i-see Sensor monitors the temperature at

the floor level and adjusts the outlet-air tem-

perature to prevent insufficient warming.

Floor-level temperatureis monitored to preventexcessive cooling.

Floor-level temperatureis monitored to determineif heating is needed.


30/2689

Pre-filter

Plasma purifying filter

Plasma deodorising filter

Fan guard

Vane

Front panel

White & Silver Indoor Units

Indoor units are available in two colours, white or silver. Choose the colour that best matches your room interior.

Quick Clean Body

The front panel is detachable and the airflow vents can be opened

without requiring any special tools, making air conditioner cleaning

and maintenance easier than ever. Periodic cleaning of the air condi-

tioner is recommended to ensure that operation efficiency and

energy savings are maximised.

What is Ozone? Ozone density during the ozone shower is safeOzone (03) is a very unstable molecule that slowly transforms itself

into oxygen (02) and nascent oxygen (O). Splitting the nascent oxygen

creates the oxidising ability to sterilise and deodorise.

O2 O3 O2 (O)+ +Ozone OxygenOxygen Nascent OxygenHigh voltage

MSZ-FD Series units are equipped with a Mold Fighter function

designed to suppress the growth of mold spores. The plasma elec-

trode generates ozone, which then attacks the spores and reduces

growth by approximately 20%.

O3

O3OO O3

Mold Fighter Mechanism

Before ozone attack After ozone attack

Mold spore is eliminated

Mold spores Dead mold sporeOzone attackscell membrane

Cellmembrane

Ozone

Ozone shower

O3

core

0.1ppm inside indoor unit

Within the upper limit of the acceptable range for ozone gas

density in work environments.

[Safety limit advised by the Japan Society for Occupational Health.]

0.01ppm or lower in room

Below the average ozone density in coastal or forested regions.

MSZ-FD25/35/50VA MSZ-FD25/35/50VAS

White Silver

The inner fan is placed within ready reach,

for handy cleaning.

The exclusive Quick Clean Kit is easily connected to

household vacuum cleaners for quick and convenient

cleaning of the heat exchanger and fan.

Wearing gloves is highly recommended when cleaning the heat exchanger, because touching it with bare hands can cause injury.

Proper maintenancekeeps electricity

cost low

Step 1Following the use of thecooling mode, the ozonegenerated by the plasmaelectrode is distributedthroughout the indoor unitin approximately 15 minutes.

Step 2The fan is turnedon, and the heatexchanger is driedin approximately25 minutes.

Fan speed very low


31/26830

Inverter Heat Pump

Type

Indoor Unit

Outdoor Unit

Power

Supply

Cooling

Heating

Operating Current (max)

Indoor

Unit

OutdoorUnit

Ext.

Piping

Guaranteed Operating Range

[Outdoor]

Source

Outdoor (V/Phase/Hz)

Capacity

Total Input

EER

SPL

Air Volume

Capacity

Total Input

COP

SPL

Air Volume

Input


Dimensions

Weight

Breaker Size

Dimensions

Weight


Breaker Size

Diameter

Max. Length

Max. Height

Rated

Min - Max

Rated

EEL Rank

Indoor Unit [Lo-Mid-Hi-SHi*2]

Outdoor Unit [Rated]



Rated

Min - Max

Rated

EEL Rank





Rated

H x W x D

H x W x D

Liquid / Gas

Out-In

Out-In

Cooling

Heating

kW

kW

kW

dB(A)

dB(A)

m3/min

m3/min

kW

kW

kW

dB(A)

dB(A)

m3/min

m3/min

kW

A

mm

kg

A

mm

kg

A

A

mm

m

moC

oC

MSZ-FD25VA(S)*1

MUZ-FD25VA

2.5

1.1 - 3.5

0.485

5.15

A

20 - 29 - 36 - 42

46

4.6 - 6.3 - 8.6 - 11.2

35.2

3.2

1.5 - 5.5

0.610

5.25

A

20 - 29 - 36 - 43

46

4.5 - 6.7 - 9.2 - 12.1

32.8

10.0

0.031

0.4

295 - 798 - 257

12

10

550 - 800 - 285

36

9.60

10

6.35 / 9.52

20

12

-10 ~ +46

-15 ~ +24

3.5

1.1 - 4.0

0.850

4.12

A

21 - 29 - 36 - 43

47

4.6 - 6.3 - 8.6 - 11.2

36.3

4.0

1.5 - 6.3

0.865

4.62

A

21 - 29 - 36 - 44

50

4.7 - 6.7 - 9.2 - 12.5

37.8

10.0

0.033

0.4

295 - 798 - 257

12

10

550 - 800 - 285

36

9.60

10

6.35 / 9.52

20

12

-10 ~ +46

-15 ~ +24

5.0

1.5 - 5.8

1.500

3.33

A

29 - 39 - 45 - 52

54

6.3 - 8.9 - 11.2 - 14.8

49.0

5.8

1.5 - 7.8

1.550

3.74

A

27 - 37 - 43 - 50

56

5.5 - 8.9 - 11.2 - 14.8

49.0

16.0

0.060

0.5

295 -798 -257

12

16

850 - 840 - 330

55

15.5

16

6.35 / 12.7

30

15

-10 ~ +46

-15 ~ +24

MSZ-FD35VA(S)*1

MUZ-FD35VA

MSZ-FD50VA(S)*1

MUZ-FD50VA

Outdoor power supply

230 / Single / 50

*1 MSZ-FD VAS is silver.

*2 SHiSuper High

MUZ-FD25/35VA MUZ-FD50VA

EER

ACOP

A

Optional

Optional Optional

Optional

Indoor Unit Outdoor Unit

RemoteController

MSZ-F SERIES

White

Silver

MSZ-FD25/35/50VA

MSZ-FD25/35/50VAS


32/2681

MSZ-G SERIESThe standard model MSZ-G units provide excellent energy savings and operation is

impressively silent. A vast series line-up is ready to ensure comfortable room

environments in response to your air conditioning needs.

MSZ-GE22/25/35/42/50VA MSZ-GE60/71VA

Stylish and Compact

800mm

Fits neatly above800mm-wide doors.

Quiet Operation

A Silent Mode setting has been added to the fan speed settings,

ensuring super-quiet operation below 20dB for model sizes 35 and

under. Perfect for the bedroom; its so quiet youll check to see if its on.

Wide Line-up

Seven different indoor units (Model 22-71) and 10 outdoor units are

available to meet your diversified air conditioning needs.

Nano Platinum Filter

This filter incorporates nanometre-sized platinum-ceramic particles

that generate stable antibacterial and deodourising effects. The size

of the three-dimensional surface has been increased as well, enlarg-

ing the filter capture area. These features give the Nano Platinum

Filter of the MSZ-GE60/71 models better dust collection perfor-

mance than conventional filters. The superior air-cleaning effective-

ness raises room comfort yet another level.

It is okay to wash the filter with water

(air-cleaning effect is maintained)

In the case of MSZ-GE22-50

Outdoor Units for Cold Region

Single split-type outdoor units are available in both standard and

heater-equipped units. An electric heater is installed in each unit to

prevent freezing in cold outdoor environments.

MUZ-GE25/35/42VA MUZ-GE50VA MUZ-GE25/35/42VAH MUZ-GE50VAH

Standard Units Heater Installed

i save Mode

i save is a simplified setting function that recalls the preferred

(preset) temperature by pressing a single button on the remote con-

troller. Press the same button twice in repetition to immediately

return to the previous temperature setting. Using this function con-

tributes to comfortable, waste-free operation, realising the most

suitable air conditioning settings and saving on power consumption

when, for example, leaving the room or going to bed.

Rank A Energy Savings Achieved for Entire Range of Series

All models in the series, from the low-capacity 25 to the high-capacity 71, have achieved the Rank A energy-savings rating. For home use, such

as in bedrooms and living rooms, to light commercial use, such as in offices, our air conditioners are contributing to reduced energy consumptionin a wide range.

EER

ACOP

A

Only 798mm

Only

19dB

MSZ-GE22/25/35/42/50VA

MSZ-GE60/71VA

Temperature can be preset to 10C when heating in the i-save mode

(except when connected to MXZ-8A140VA).

22-35

22oc 18oc

Heating Heating

3D surface (Waved surface)

Comparison with MSZ-GC25/35/50VA, GA60/71VA.Cooling Heating

COP

4.21

Rank ARank A Rank A Rank A Rank A Rank A

COP4.57

EER4.05

COP4.19

EER3.46

COP3.62

EER3.30

COP3.71

COP3.76

EER3.26

COP3.76

MSZ-GE25VA MSZ-GE35VA MSZ-GE42VA MSZ-GE50VA MSZ-GE60VA MSZ-GE71VA

22%UP

19%UP

24%UP

11%UP 9%

UP

EER3.40

9%UP

9%UP

7%UP 11%

UP

14%UP

EER4.59

An elegant, high-quality look is achieved through the new stylish

design adopted for indoor units. The simple ergonomic square shape

and pure white color express a sense of sophistication that matches

well with virtually any interior dcor.

MSZ-GE22/25/35/42/50VA

(25/35/42/50)

60/71

NanoPlatinum


33/26832

Inverter Heat PumpType

Indoor Unit

Outdoor Unit

PowerSupply

Cooling

Heating


Indoor

Unit

OutdoorUnit

Ext.Piping

Guaranteed Operating Range

[Outdoor]

Source

Outdoor (V/Phase/Hz)

Indoor (V/Phase/Hz)

Capacity

Total Input

EER

SPL

Air Volume

Capacity

Total Input

COP

SPL

Air Volume

Input


Dimensions

Weight

Breaker Size

Dimensions

Weight


Breaker Size

DiameterMax. Length

Max. Height

Rated

Min - Max

Rated

EEL Rank

Indoor Unit [Silent-Lo-Mid-Hi-SHi*1]




Rated

Min - Max

Rated

EEL Rank





Rated

H x W x D

H x W x D

Liquid / Gas

Out-In

Out-In

Cooling

Heating

kW

kW

kW

dB(A)

dB(A)

m3/min

m3/min

kW

kW

kW

dB(A)

dB(A)

m3/min

m3/min

kW

A

mm

kg

A

mm

kg

A

A

mm

m

moC

oC

MSZ-GE25VA

MUZ-GE25VA(H)

2.5

1.1 - 3.5

0.545

4.59

A

19 - 21 - 29 - 36 - 42

47

4.1 - 4.8 - 6.7 - 9.1 - 11.3

32.6

3.2

1.3 - 4.5

0.700

4.57

A

19 - 21 - 29 - 36 - 42

48

4.1 - 4.8 - 6.6 - 9.1 - 11.5

34.7

7.4

0.023

0.4

295 - 798 - 232

10

-

550 - 800 - 285

30

7.0

10

6.35 / 9.52

20

12

-10 ~ +46

-15(-20) ~ +24

MSZ-GE22VA

N/A*2

-

-

-

-

-

19 - 21 - 29 - 36 - 42

-

4.1 - 4.8 - 6.7 - 9.1 - 11.3

-

-

-

-

-

-

19 - 21 - 29 - 36 - 42

-

4.1 - 4.8 - 6.6 - 9.1 - 11.5

-

-

0.023

0.4

295 - 798 - 232

10

-

-

-

-

-

6.35 / 9.52

-

-

-

-

3.5

1.1 - 4.0

0.865

4.05

A

19 - 22 - 30 - 36 - 43

47

4.1 - 4.8 - 6.7 - 9.1 - 12.7

36.3

4.0

1.6 - 5.3

0.955

4.19

A

19 - 22 - 30 - 36 - 42

48

4.1 - 4.8 - 6.7 - 9.1 - 11.5

34.8

8.6

0.029

0.4

295 - 798 - 232

10

-

550 - 800 - 285

33

8.2

10

6.35 / 9.52

20

12

-10 ~ +46

-15(-20) ~ +24

MSZ-GE35VA

MUZ-GE35VA(H)

Outdoor power supply

230 / Single / 50

4.2

0.9 - 4.8

1.215

3.46

A

26 - 30 - 35 - 40 - 46

50

5.8 - 6.8 - 8.6 - 10.4 - 12.8

36.3

5.4

1.4 - 6.0

1.460

3.70

A

26 - 30 - 35 - 40 - 46

51

5.8 - 7.0 - 8.6 - 10.4 - 13.1

34.8

10.0

0.03

0.4

295 - 798 - 232

10

-

550 - 800 - 285

36

9.6

10

6.35 / 9.52

20

12

-10 ~ +46

-15(-20) ~ +24

MSZ-GE42VA

MUZ-GE42VA(H)

7.1

2.4 - 8.7

2.130

3.33

A

30 - 37 - 41 - 45 - 49

55

9.7 - 11.5 - 13.3 - 15.4 - 17.8

50.1

8.1

2.2 - 9.9

2.110

3.83

A

30 - 37 - 41 - 45 - 49

55

10.2 - 11.5 - 13.3 - 15.4 - 17.8

55.0

16.6

0.058

0.5

325 - 1100 - 238

16

-

880- 840- 330

53

16.1

20

9.52 / 15.88

30

15

-10 ~ +46

-15 ~ +24

MSZ-GE71VA

MUZ-GE71VA

*1 SHiSuper High *2 MSZ-GE22 is for MXZ connection only.

MSZ-GE50VA

MUZ-GE50VA(H)

5.0

1.4 - 5.5

1.515

3.30

A

28 - 33 - 38 - 44 - 49

54

6.5 - 7.8 - 9.6 - 11.9 - 15.1

49.0

5.8

1.4 - 7.3

1.565

3.71

A

28 - 33 - 37 - 43 - 48

56

6.5 - 7.9 - 9.6 - 12.2 - 14.5

49.0

13.0

0.043

0.5

295 - 798 - 232

10

-

850 - 840 - 330

54

12.5

16

6.35 / 12.7

30

15

-10 ~ +46

-15(-20) ~ +24

MSZ-GE60VA

MUZ-GE60VA

6.0

1.5 - 7.5

1.760

3.40

A

29 - 37 - 41 - 45 - 49

55

9.8 - 11.3 - 13.4 - 15.6 - 18.3

40.9

6.8

2.0- 9.3

1.770

3.84

A

29 - 37 - 41 - 45 - 49

55

9.8 - 11.3 - 13.4 - 15.6 - 18.3

49.2

14.5

0.062

0.5

325- 1100- 238

16

-

880- 840- 330

50

14.0

20

6.35 / 15.88

30

15

-10 ~ +46

-15 ~ +24

MUZ-GE25/35/42VA(H)

Indoor Unit

MUZ-GE50VA(H)

MUZ-GE60/71VA

MSZ-GE22/25/35/42/50VA

MSZ-GE22/25/35/42/50VA

MSZ-GE60/71VA

MSZ-GE60/71VA

Outdoor Unit

MSZ-G SERIES

RemoteController

Remote

Controller

EER

ACOP

A

Optional

Optional Optional Optional

60/71 60/71

2 5 - 50 2 5 - 50

Optional

ElectrostaticAnti-allergy

Optional

60/71 60/71

NanoPlatinum


34/2683

MSZ-H SERIESCompact, high-performance indoor and outdoor units and advanced invertertechnologies provide superior energy savings and comfort in all rooms.

MSZ-HC25/35VA(B)

Operating Range

Stylish Design with Flat Panel Front

A stylish flat panel design is employed for the front of the indoor unit. The simple look matches room

aesthetics.

Silent Operation

Quiet, relaxing space is within reach. Operational noise is a low 26dB.

Operation is so silent you might even forget the air conditioner is on.

Wide Operating Range

All units offer powerful start-up output to quickly eliminate the gap

between temperature setting and actual room temperature. From

cooling on the hottest summer day to heating on a cold winter night,

once the desired temperature is reached, a stable and comfortable roomtemperature is maintained.

Compact

Full Product Line Cataloque 2010 Split-type_air_conditioners

Documents

Transcript of Full Product Line Cataloque 2010 Split-type_air_conditioners