FUJITSU LIFEBOOK U727 FUJITSU LIFEBOOK U747...
Transcript of FUJITSU LIFEBOOK U727 FUJITSU LIFEBOOK U747...
Congratulations on your purchase of an innovativeproduct from Fujitsu.
The latest information about our products, tips, updates etc. can be foundon the Internet at: http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS
You can find driver updates at: http:support.fujjitsupc.com/CS/Portal/support.do?-DOWNLOADS
Should you have any technical questions, please contact:
• our Hotline/Service Desk• http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS• Your sales partner• Your sales officeWe hope you enjoy working with your new Fujitsu system!
Contact address in North AmericaFUJITSU AMERICA INC.1250 East Arques Avenue, Sunnyvale,CA 94085-3470, U.S.A.Telephone: 800 831 3183 or 408 746 6000"www.fujitsu.com/us""http://solutions.us.fujitsu.com/contact"Have a question? Email us at: "[email protected]"Copyright©2017 Fujitsu America, Inc. All rights reservedFPC65-7692-01
FUJITSU LIFEBOOK U727FUJITSU LIFEBOOK U747FUJITSU LIFEBOOK U757
Operating Manual
Innovative technology 7
Ports and controls 9
Important notes 18
First-time setup of your device 22
Working with the notebook 25
Security functions 51
Connecting external devices 57
Removing and installing componentsduring servicing 64
Settings in BIOS Setup Utility 75
Troubleshooting and tips 78
Technical data 86
Manufacturer’s notes 88
Index 94
RemarksInformation on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
TrademarksFujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited or its subsidiaries in the USA and other countries.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the USA and/or other countries.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.
Adobe Reader is a trademark of Adobe Systems Incorporated.
All other trademarks specified here are the property of their respective owners.
CopyrightNo part of this publication may be copied, reproduced or translated withoutthe prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means without the written approval of Fujitsu.
Contents
ContentsInnovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ports and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9FUJITSU LIFEBOOK U727 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9FUJITSU LIFEBOOK U747 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12FUJITSU LIFEBOOK U757 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Additional safety notes for devices with wireless components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Travelling with your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Notebook: transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23AC adapter connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Switching on the device for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Working with the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Switching on the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Notebook: switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Virtual numeric keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Separate number block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Country and keyboard settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Touchpad and touchpad buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Moving the pointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Selecting an item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Executing commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Dragging items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Touchscreen/LCD screen without touch function (device-dependent) . . . . . . . . . . . . . . . . . . . . . . . . 36Using fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Charging, caring for and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Using the power-management features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Loudspeakers and microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Fujitsu 3
Contents
Wireless components Wireless LAN / Bluetooth / LTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Your Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Ports on the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Connecting the notebook to the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Connecting the AC adapter to the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Switching on the notebook via the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Disconnecting the notebook from the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Configuring the fingerprint sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Configuring the palm vein sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Using the Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Configuring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Protecting BIOS Setup Utility (supervisor and user password) . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Password protection for booting of the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Password protection for the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Trusted Platform Module (TPM) (device-dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Enabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Disabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SmartCard reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Inserting the SmartCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Connecting an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62HDMI port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
USB port with charging function (USB Type-C™) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65USB port with charging function (Anytime USB charge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Headset port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Removing and installing components during servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Notes on installing and removing boards and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Preparing to remove components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Installing and removing memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Removing memory modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Installing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Installing and removing an M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Installing an M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Removing an M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Removing and installing hard disk (HDD, LIFEBOOK U757 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Removing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Installing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Finishing component removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
4 Fujitsu
Contents
Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Operating BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . 81Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . 81Load Setup Defaults – Copy Standard Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Discard Changes – Discard changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . 81Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . 81Save Changes and Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Restoring the hard disk contents under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83The notebook’s date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83When certain characters are entered on the keyboard, only numerals are written . . . . . . . . . . . . . 83The notebook’s LCD screen remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84The LCD screen is difficult to read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85The notebook cannot be started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85The notebook stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86The wireless connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Acoustic warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87SmartCard reader is not recognized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87SmartCard PIN forgotten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87SmartCard lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90LIFEBOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Manufacturer’s notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Declarations of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Radio frequencies used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Other certification markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Fujitsu 5
Declarations of Conformity
Declarations of Conformity
DECLARATION OF CONFORMITYaccording to FCC Part 15
Responsible Party Name:Address:
Telephone:Declares that product:
Fujitsu America, Inc.1250 E. Arques AvenueSunnyvale, CA 94085(408) 746-6000
Base Model Configuration: LIFEBOOKS U727,U747 and U757 Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Fujitsu 6
Innovative technology
Innovative technology... and ergonomic design make your device a reliable and convenient companion.
The device boots very quickly, is ready for immediate use and offers a particularlylong operating time because of its high capacity battery.
With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorized access by using the powerful password properties.
Information on the connections and user components of your notebookcan be found in "Ports and controls", Page 9.
Further informationThe Windows drivers for your device can be found on our Internet site.The factory installation of your device does not support any other operating system. Fujitsu accepts no liability whatsoeverif any other operating system is used.
Software oriented components of these instructions refer to Microsoft products, if they come within the scope of the delivery.
If you install other software products, pay attention to the operating instructions of the manufacturer.
Fujitsu 7
Innovative technology
Notational conventionsPay particular attention to text marked with this symbol. Failure to observethese warnings could pose a risk to health, damage the device or leadto loss of data. The warranty will be invalidated if the device becomesdefective through failure to observe these warnings.Indicates important information for the proper use of the device.
► Indicates an activity that must be performedIndicates a result
This font indicates data entered using the keyboard in a program dialog or at the command line, e.g. your password (Name123) or a command used to start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:Installation is complete.
This font Indicates
• terms and texts used in a software interface, e.g.: Click on Save• names of programs or files, e.g. Windows or setup.exe.
"This font" Indicates
• cross-references to another section, e.g. "Safety information"• cross-references to an external source, e.g. a web address: For more
information, go to www.fujitsu.com/us• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manualKey indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Donot switch off the device
8 Fujitsu
Ports and controls
Ports and controlsThis chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarize yourself with these components before you start to work with the device.
FUJITSU LIFEBOOK U727Front
131
2
5
56 7
4
10
11
89
1 = Microphone (optional)2 = WebCam (optional)3 = WebCam LED (optional)4 = Touchpad5 = Loudspeakers6 = Status indicators
7 = ON/OFF button8 = Fingerprint sensor (optional) or palm
vein sensor (optional)9 = Memory card slot10 = Touchpad buttons11 = Status indicators
Fujitsu 9
Ports and controls
Left side
1 2 3 4 5 6
4 = USB port 3.0 with charging function(Anytime USB charge)
5 = Headset port6 = SmartCard reader (optional)
1 = DC input connector (DC IN)2 = LAN port3 = USB port 1 (Gen1) with charging function
(USB Type-C™)
Right side
1 2 3 4
1 = USB port 3.02 = Displayport
3 = VGA monitor port4 = Security Lock device
10 Fujitsu
Ports and controls
Bottom
1 3
4
2
5
6
1 = Battery 2 = Battery release 13 = Service compartment M.2 module
4 = Memory service compartment5 = Port Replicator port6 = Battery release 2
Fujitsu 11
Ports and controls
FUJITSU LIFEBOOK U747Front
131
2
56 7
4
10
11
89
5
1 = Microphone (optional)2 = WebCam (optional)3 = WebCam LED (optional)4 = Touchpad5 = Loudspeakers6 = Status indicators
7 = ON/OFF button8 = Fingerprint sensor (optional) or palm
vein sensor (optional)9 = Memory card slot10 = Touchpad buttons11 = Status indicators
12 Fujitsu
Ports and controls
Left side
1 2 3 4 5
4 = USB port 3.0 with charging function(Anytime USB charge)
5 = SmartCard reader (optional)
1 = DC input connector (DC IN)2 = VGA monitor port3 = USB port 1 IGen 1) with charging function
(USB Type-C™)
Right side
1 2 3 54
1 = Headset port2 = USB port 3.03 = Displayport
4 = LAN port5 = Security lock device
Fujitsu 13
Ports and controls
Bottom
1 3
4
2
5
6
1 = Battery 2 = Battery release 13 = Service compartment M.2 module
4 = Memory service compartment5 = Port Replicator port6 = Battery release 2
14 Fujitsu
Ports and controls
FUJITSU LIFEBOOK U757Front
131
2
56 7
4
11
12
910
5
8
1 = Microphone (optional)2 = WebCam (optional)3 = WebCam LED (optional)4 = Touchpad5 = Loudspeakers6 = Status indicators7 = ON/OFF button
8 = Separate numeric keypad9 = Fingerprint sensor (optional) or palm
vein sensor (optional)10 = Memory card slot11 = Touchpad buttons12 = Status indicators
Fujitsu 15
Ports and controls
Left side
1 2 3 4 5
4 = USB port 3.0 with charging function(Anytime USB charge)
5 = SmartCard reader (optional)
1 = DC input connector (DC IN)2 = Monitor port (VGA)3 = USB 1 (Gen 1) port with charging function
(USB Type-C™)
Right side
1 2 3 54 6
1 = Headset port2 = USB port 3.03 = Displayport
4 = HDMI port5 = LAN port6 = Security lock device
16 Fujitsu
Ports and controls
Bottom
1 3
4
2
5
6
1 = Battery 2 = Battery release 13 = Service compartment hard disk (HDD
or M.2 module)
4 = Memory service compartment5 = Port replicator port6 = Battery release 2
Fujitsu 17
Important notes
Important notesImportantnotesNotes
This chapter contains essential safety information which must be followedwhen working with your notebook. Other notes also provide useful informationwhich will help you with your notebook.
Safety notesSafetynotesNotes
Please follow the safety notes provided in the "Safety/Regulations" manualas well as the safety notes given below.
Please pay special attention to the sections in the manual markedwith the symbol on the left.
When connecting and disconnecting cables, observe the relevantnotes in this operating manual.
Read the information on the ambient conditions in the "Technical data",Page 90 and "First-time setup of your device", Page 22 before preparing yournotebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in thesection "Cleaning the notebook", Page 21.
Pay attention to the additional safety notes for devices with wireless componentsprovided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "Removing and installingcomponents during servicing", Page 68.
This notebook complies with the relevant safety regulations for data processingequipment. If you have questions about using your notebook in a particular area,please contact your sales outlet or our Hotline/Service Desk.
18 Fujitsu
Important notes
Additional safety notes for devices withwireless componentsWirelesscomponent:WirelessLAN:Bluetooth,safetynotes
If a wireless component (Wireless LAN, Bluetooth, UMTS, LTE) is incorporated into your notebook,you must be sure to observe the following safety notes when using your notebook:
• Switch off the wireless components when you are in an aircraft or driving in a car.• Switch off the wireless components when you are in a hospital, an operating
room or near a medical electronics system. The transmitted radio wavescan impair the operation of medical devices.
• Switch off the wireless components when you let the device get near flammablegases or into hazardous environments (e.g. petrol station, paintshops), as thetransmitted radio waves can cause an explosion or a fire.
For information on how to switch wireless components on and off, see chapter"Switching the wireless components on and off", Page 49.
Energy savingNotesEnergyEnergysaving
Switch the notebook off when it is not in use. Switch off external, connected devices if youare not using them. If you use the energy saving functions, the notebook uses less energy.You will then be able to work for longer before having to recharge the battery.
Energy efficiency is increased and the environmental impact is reduced.You save money while protecting the environment.
Energy saving under Windows► Make use of the power management features (see "Using the power-management features",
Page 42).
Travelling with your notebookMobileoperationNotesTransportationNotebook
Please observe the points listed below when travelling with your notebook.
Fujitsu 19
Important notes
Before you travel► Back up important data stored on your hard disk.
NotebookTravel,notebook
► Switch off the wireless component for data security reasons. With data traffic via a wirelessconnection, it is also possible for unauthorized third parties to receive data.
Information on activating data encryption is provided in the documentationfor your wireless component.
► If you wish to use your notebook during a flight, first check with the flightattendants if it is OK to do so.
When travelling in other countries► If you are travelling abroad, check that the AC adapter can be operated with the
local AC voltage. If this is not the case, obtain the appropriate AC adapter for your notebook. Do not use any other voltage converter!
► Check whether the local AC voltage and the power cable are compatible. If this is not the case, buy a power cable that matches the local conditions.
► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the wireless component integrated in your notebook there
Notebook: transportingProtect the notebook from severe shocks and extreme temperatures(e.g. direct sunlight in a car).
► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.TNroatnesbopookrtation
► Switch the notebook off.► Unplug the AC adapter and all external devices from the power outlet► Disconnect the AC adapter cable and the data cables for all external devices.► Close the LCD screen.► To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
20 Fujitsu
Important notes
Cleaning the notebookDo not clean any interior parts yourself; leave this job to a service technician.
Only use cleaning products designed for computers. Normal householdcleaners and polishes can damage the markings on the keyboard and thedevice, the paintwork or the notebook itself.
Ensure that no liquid enters the notebook.
The LCD screen very sensitive to scratches. Only clean the displaysurface with a very soft, slightly damp cloth.
► Switch the notebook off.CleaningNotesNotebookKeyboardTouchpadLCDscreen
► In order to prevent accidentially switching the device on, remove the power cable from the ACadapter and remove the battery (see "Removing and installing the battery", Page 40).The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which hasbeen moistened in mild domestic detergent and then carefully wrung out.You can use disinfectant wipes to clean the keyboard and the touchpad.
Ensure that no liquid enters the device.
Fujitsu 21
First-time setup of your device
First-time setup of your deviceFirst-timesetupGettingstarted
Please read the chapter "Important notes", Page 18.
If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it to the power outlet using the AC adapter, see "AC adapter connecting", Page 23. T h e A C adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
When the device is delivered, the battery is located in the battery compartment. The batterymust be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. Youcan increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to yourdevice, please refer to the operating manual for your device.
Unpacking and checking the deviceShould you discover any damage that occurred during transportation,notify your local sales outlet immediately!
► Unpack all the individual parts.PackagingTransport
► Check your device for any visible damage which may have occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
22 Fujitsu
First-time setup of your device
Selecting a locationSelectinga locationDeviceMainsadapter
Select a suitable location for the device before setting it up. Followthe instructions below when doing so:
• Never place the device or the AC adapter on a heat-sensitive surface.The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contactwith the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the rubberfeet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97" away from the device andits AC adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
AC adapter connectingPreparingforoperationMainsadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country inwhich you purchased your device. Make sure that the power cable is approvedfor use in the country in which you intend to use it.
3
1
2
► Connect the power cable (1) to the ACadapter.
► Plug the AC cable (2) into a AC outlet.► Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
Fujitsu 23
First-time setup of your device
Switching on the device for the first timeSwitchingon for thefirst time
When you switch on the device for the first time, the supplied software is installed and configured. Because this procedure must not be interrupted, you should set aside enough time for it to be fully completed and connect the device to a power outlet using the AC adapter.
During the installation process, DO NOT restart the device unlessyou are requested to do so!
To make it easier to use your device for the first time, the operating systemis pre-installed on the hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programs, updates, manuals etc. on the device or on the Internet under www.fujitsu.com/us
You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
24 Fujitsu
Working with the notebook
Working with the notebookNotebook,operationNotebook
This chapter describes the basics for operating your notebook. Please read the chapterentitled "Connecting external devices", Page 61 for instructions on how to connectdevices such as a mouse and a printer to the notebook.
Please refer to the notes in "Important notes", Page 18.
Status indicatorsStatusindicators
The status indicators provide information about the status of the power supply,the hard disk and the keyboard functions.
F
Fujitsu 25
Working with the notebook
Indicator DescriptionPower-on indicator/StandbyStandbyindicatorPower-onindicator
• Indicator is illuminated: The notebook is switched on.• Indicator flashes: The notebook is in standby mode.• Indicator is off: The notebook is switched off.Battery charging indicator/power connectorThe state of charge of the battery is shown by the battery indicator.
• Indicator is illuminated (white): The battery is charged or no battery has beeninserted.
• The indicator lights up orange: the AC adapter is connected and the battery isbeing charged.
• Indicator flashes orange: the AC adapter is connected but the battery cannot becharged as the battery is too hot or cold for charging. The charging process iscontinued as soon as the battery reaches a permissible temperature again.
• Indicator flashes red: An error has occured.• The indicator is not illuminated: the AC adapter is not connected.BatterystatusindicatorBatterysymbolBatteryindicator
Battery indicator• Indicator is illuminated (white): The battery is charged to between 51% and
100% of its maximum capacity.• The indicator lights up orange: The battery is charged to between 13% and
50% of its maximum capacity.• The indicator lights up red: The battery is charged to between 0% and 12% of
its maximum capacity.• Indicator flashes red: An error has occured.Drive indicatorDriveIndicator
The indicator is lit: The hard disk drive is being accessed.
Radio components indicator• Indicator is illuminated: The wireless components are switched on.• Indicator is off: The wireless components are switched off.
FF Lock indicatorIndicatorFLock
The indicator is lit: The key combination Fn + F has been pressed. Instead ofthe Feature keys, the Function keys can be executed by pressing the keys directly
Num Lock indicatorIndicatorNumLock
Indicator is illuminated: The Num key has been pressed. The virtual numericalkeypad is activated. You can output the characters indicated on the upper right ofthe keys.
26 Fujitsu
Working with the notebook
Indicator DescriptionCaps Lock indicatorIndicatorCapsLock
Indicator is illuminated: The Caps Lock key has been pressed. All the charactersyou type will appear in upper case. In the case of overlay keys, the characterprinted on the upper left of the key will appear when that key is pressed.Scroll Lock indicatorIndicatorScrollLock
Indicator is illuminated: the key combination Fn + Scr has been pressed. Theeffect that this key has varies between applications.
Fujitsu 27
Working with the notebook
Switching on the notebook► Open the LCD screen.
Switchingon
► Press the ON/OFF button for about 1second to switch the notebook on.
The power-on indicator is lit.
Notebook: switching offBack up your data and close all applications before you switch off yourdevice. Otherwise data might be lost.
► Shut down the operating system correctly.Notebook
► If the notebook does not switch itselfoff automatically, press the ON/OFFbutton for about five seconds.
► Close the LCD screen.
28 Fujitsu
Keyboard BKNeutymtboeonrasicrdkeypad The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations.
The following description of keys refers to Windows. Additional functions supported by the keys are described in the relevant manuals supplied with your application programs.
Keyboard Hot Keys and Function Keys The top row of your notebook’s keyboard has both Hot key and Function key icons:
Hot Keys are the icons on the top of the keys ranging from “Escape” on the left side through “Num Lk” on the right side of the top row. The Hot keys activate features on your device including Speaker on/off, Mic on/off, Volume up/down, Brightness up/down, etc. Hot keys are convenience features.
Function Keys are the icons on the bottom of the keys ranging from “F Lock” on the left side through ‘F12” on right side of the top row. The Function keys are numbered F1, F2, F3… up to F12 and serve as short-cut key functions. Function keys are the traditional F1-F12 function keys.
Using the F Lock, you may lock either the Hot keys or Function keys as the primary or secondary key functionality for the top row of keys. Press Fn + Esc to toggle F Lock On / Off. Once pressed, the F Lock engages and stays on like the Caps-Lock key.
F Lock On (F Lock LED is illuminated): • The Function F1-F12 keys become the primary keys. Hot keys are then accessible by pressing a key
combination of [Fn] + [Hot key].
F Lock Off (F Lock LED is not illuminated): • The Function keys are accessible by using the traditional key combination of [Fn+ (F1-F12 key)]
Special Notes: • Function keys (F1-F12) are the primary key functionality until Windows operating system is loaded, then the
primary keys follow the last F Lock setting.o Regardless of the F Lock setting, the Function keys are always the primary when accessing BIOS
during POST.o If [Fn+F2] or [Fn+F12] is pressed during boot, the BIOS menu will not work. You must press the F2 or
F12 key alone (no Fn).o To use F8 functionality from Windows PE environment, press [Fn+F8].
• F Lock is set to Off by default, and the Hot keys are primary at Windows startup.• Rebooting the system: Function keys (F1-F12) are always the primary keys until Windows is loaded, then the
primary keys are maintained from the last F Lock on/off setting prior to reboot.• If the system battery is removed and reinserted, the F Lock setting will be reset to the out of factory state
(F Lock Off).
Hot Key
Function Key
Fujitsu 29
Key combinations The following description of key combinations applies to Windows operating systems. Some of the following key combinations may not function in other operating systems or with certain device drivers.
Other key combinations are described in the relevant manuals supplied with your application programs.
Key combinations are entered as follows:
> Hot key: With F Lock Off, press Hot key alone; with F Lock On, press Fn + Hot key> Function key: With F Lock Off, press Fn + F1-F12; with F Lock On, press F1-F12 key alone
30 Fujitsu
Key combinations using the Windows keys are detailed in the manual for your operating system. In addition, the following non-labeled key combinations are supported:
Fujitsu 31
Home key The Home key jumps to the beginning of the line, document, page, cell or screen of where your cursor is positioned. End key The End key jumps to the end of the line, document, page, cell or screen of where your cursor is positioned.
32 Fujitsu
The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook.
The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device.
Fujitsu 33
Virtual numeric keypad
LIFEBOOK U727 and LIFEBOOK U747 have virtual number blocks, LIFEBOOK U757 has a separate number block.
To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recog¥ble by the numbers and symbols printed in the upper right comer of each key. If you have switched on the virtual numeric keypad, you can output the characters shown on the upper right of the keys.
The keyboard layout shown below may differ from your actual device .
1 = Valid characters when the ['"1ll\] key is not activated
DODD DODD
2
DDDD DODD
2 = Valid characters when the ["'1tJI] rs actrvated
Further infonnation about the status indicators can be found in chapter ·status indicators·. Page 25.
34 Fujitsu
Working with the notebook
Touchpad and touchpad buttonsKeep the touchpad clean. Protect it from dirt, liquids and grease.TouchpadTouchpad
Never use the touchpad if your fingers are dirty.
Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.
1
2
1 = Touchpad
2 = Touchpad buttons
You can move the cursor using the touchpad.
The touchpad buttons allow you to select and execute commands. They correspondto the buttons on a conventional mouse.
You can also deactivate the touchpad using a keyboard shortcut, so that you cannotmove the cursor unintentionally (see chapter "Key combinations", Page 32).
Moving the pointer► Move your finger on the touchpad.
Touchpad
The pointer will move.
Selecting an item► Move the pointer to the item you wish to select.
Touchpad
► Tap the touchpad once or press the left button once.The item is selected.
Executing commands► Move the pointer to the field you wish to select.
Touchpad
► Tap the touchpad twice or press the left button twice.The command is executed.
Fujitsu 35
Working with the notebook
Dragging items► Select the desired item.
Touchpad
► Press and hold the left button and, with your finger on the touchpad, dragthe item to the desired position. The item will be moved.
LCD ScreenLCNotDesscreen
High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons,these screens are manufactured for a certain resolution. An optimum and sharp image canonly be ensured with the resolution intended for the particular screen. A screen resolutionwhich differs from the specification can result in an unclear picture.
The resolution of your notebook’s screen is optimally set at the factory.
With the present standards of production technology, absolutely flawless screen imagescannot be guaranteed. There may be a few constantly light or dark pixels (pictureelements) on the screen.
Background lightingLCD screens are operated with background lighting. The luminosity of the backgroundlighting can decrease during the period of use of the notebook. However, youcan set the brightness of your screen individually.
Synchronising the display on the LCD screen and an external monitorFor more information, please refer to the chapter "Key combinations", Page 32under "Display output, switch between".
36 Fujitsu
Working with the notebook
Using fingersYou can use your finger on the touch screen of your device to executecommands and start applications.
Action DescriptionTapping ► Tap on a symbol, menu, button or folder to
select this option or to activate it.Type, hold, release ► Type and hold a symbol and release it again.
The selected action is performed.Dragging ► Tap and hold a symbol and drag it to another
place.You can for instance drag apps or widgets ontothe home page in this way.
Double-tap ► To enlarge a view, quickly tap twice on aweb page, map or another screen.
When you double-tap on an image in a webbrowser, it will be enlarged and anotherdouble-tap will make it smaller again.
Zoom in/Zoom out ► With some apps, you can enlarge thedisplay size by moving two fingers apart onthe touchscreen, and reduce it by movingyour fingers together.
Input fields Data must be entered for some apps, forinstance an Internet page or your name andpassword.
► Tap on the input field.An on-screen keyboard opens, with which youcan enter your data.
Fujitsu 37
Working with the notebook
WebcamWebcam
Depending on the device version, your device may have an integralWebcam with microphone.
Depending on the software used, you can use your Webcam to take pictures,record video clips or take part in web chats.
The WebCam has its own status indicator. The indicator lights up when the WebCam is switched on.
• The picture quality depends on the lighting conditions and the software being used.• You can only operate the webcam with a particular application (e.g. an Internet telephony
program or a video conferencing program which supports a webcam).• When using the webcam the notebook support must not wobble.• The webcam automatically adjusts itself to the current light level. For this reason
the LCD screen may flicker while the light level is adjusted.
Further information on using the webcam and on the additional settingswhich are possible for your webcam can be found in the help functionof the program which uses the webcam.
38 Fujitsu
Working with the notebook
T
Rechargeable batteryLRRRBaifeeeetccctehhh,braaaayrrrttegegegeraaaybbblllebaebaebatttttterereryyy
When not plugged into a power outlet, the notebook runs on its built-in battery. Youcan increase the life of the battery by caring for the battery properly. The averagebattery life is around 500 charge/discharge cycles.
You can extend the battery life by taking advantage of the available energy saving functions.
Charging, caring for and maintaining the batteryBaBatttteerryy
he notebook battery can only be charged when the ambient temperature isbetween 5°C / 41°F and max. 35°C / 95°F.
You can charge the battery by connecting the notebook to the AC adapter(see "AC adapter connecting", Page 23).
Please note that the battery will not be charged if the battery status is between90% and 100%. If the battery status is less than 90% and the AC adapter isconnected, the battery will be charged to 100%.
If the battery status is low, you will hear a warning alarm. If you do not connectthe AC adapter within approximately five minutes of the warning alarm describedabove, your notebook will switch off automatically.
monitoring the battery charging levelBBaatttteerryystatusmeter
Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When you place the mouse pointer on the battery symbol, the system displays the battery status.
Battery storageSCBaBaehttlfttar-eedrrgiyyisngchcaargpeac, ibtya,ttbae trytery
Store battery packs in a dry environment at a temperature between 0°C / 32°F and 30°C / 86°F. The lower the temperature at which the batteries are stored, the lower the rate of self-discharge.
If you will be storing batteries for a longer period (longer than two months),the battery charge level should be approx. 30 %. To prevent exhaustivedischarge which would permanently damage the battery, check the levelof charge of the battery at regular intervals.
To be able to make use of the optimal charging capacity of the batteries, the batteryshould be completely discharged and then fully recharged.
If you do not use the batteries for long periods, remove them from thenotebook. Never store the batteries in the device.
Fujitsu 39
Working with the notebook
Removing and installing the batteryOnly use batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for long periods in the discharged state. Thiscan make it impossible to recharge.
The LIFEBOOK U747 is shown below. The procedure is the samefor all three device variants.
Removing a battery► Prepare for removal, see chapter "Preparing to remove components", Page 69.
a1
2
1 HOLD
3 PULL UP
2
3
► Slide the locking device (1) in the direction of the arrow and hold it in place.► Slide the locking device (2) in the direction of the arrow.► Grasp the opening (b) and lift the battery out of the battery compartment
in the direction of the arrow (3).
40 Fujitsu
Working with the notebook
Installing a battery
2 21
► Position the battery at the edge.► Insert the battery into the battery compartment until it engages positively (1)► Slide the locking device (2) in the direction of the arrow.► Complete the removal, see chapter "Finishing component removal", Page 78.
Fujitsu 41
Working with the notebook
Using the power-management featuresPowerPowerBattery
The notebook uses less power when the available power-management features are used. Youwill then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmental pollution reduced. Bychoosing the best power options, you can make significant savings andat the same time help protect the environment.
When you close the LCD screen, depending on the setting in Windows, thenotebook automatically enters a power saving mode.
The recommended settings for the Windows energy saving functions are predefined as "FujitsuComputer EcoSettings" in the Power Options of the Control Panel and can be displayed there.
► Select the power management functions in your Control Panel.
If you need further information about an option, you can get help with mostsettings by pressing F1 to open the Microsoft Help.
When the notebook is in power-saving mode, the following must be remembered:
During power saving mode, open files are held in the main memoryor in a swap file on the hard disk.
Never turn off your notebook while it is in a power saving mode. If the built-in battery isnearly empty, close the open files and do not go into power saving mode.
If you do not intend to use your notebook for a long period of time:
► Exit power saving mode if necessary via the mouse or keyboard or by switching on thenotebook.
► Close all opened programs and completely shut down the notebook.
42 Fujitsu
Working with the notebook
Memory cardsSlot
Your notebook is equipped with an integrated memory card reader.
Observe the manufacturer’s instructions when handling the memory cards.Memorycard
Supported formatsYour notebook supports the following format:
• Secure Digital (SDTM card)
Inserting the memory card► Carefully slide the memory card into the
slot. The label should be facing upward. Donot apply excessive force, as otherwise thedelicate contact surfaces could be damaged.Memorycard
Depending on the particular typeused, the memory card may protrudeslightly from the slot.
Removing the memory cardMemorycard
In order to protect your data, always follow the correct procedure for removingthe card (see the documentation for your operating system).
1
2
► On devices with card locking: Presson the memory card (1).Memorycard
The memory card is released andcan now be removed.
► Pull the memory card out of the slot (2).
Fujitsu 43
Working with the notebook
Loudspeakers and microphonesMicrophoneLoudspeakersVolumecontrol
You will find information about the exact position of speakers and microphonesin chapter "Ports and controls", Page 9.
Please refer to chapter "Key combinations", Page 32 for information on setting the volumeand also enabling/disabling the loudspeakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in speakers are disabled.
Information on connecting headphones and a microphone can be foundin "Connecting external devices", Page 61.
44 Fujitsu
Working with the notebook
Wireless components Wireless LAN / BluetoothThe installation of radio components not approved by Fujitsu will invalidatethe certifications issued for this device.
Switching the wireless components on and off► Press the key with the radio symbol (key F5 ), to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth
The wireless component indicator will illuminate when one or more wirelesscomponents are switched on.
If you switch off the radio components, the wireless LAN antenna and the Bluetooth module will also be switched off.
You can activate and deactivate the installed radio components individually using the WirelessSelector program.
Details on using a Wireless LAN can be found in the online help system included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you received with your Bluetooth software.
Setting up WLAN access• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in thedocumentation for your operating system.
Fujitsu 45
Working with the notebook
Ethernet and LANEthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it toestablish a connection to a local network (LAN = Local Area Network).
2
1
► Connect the network cable to the LANport of the notebook (1).
► Connect the network cable to yournetwork connection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type ofcable can be obtained from a specialist dealer.
46 Fujitsu
Working with the notebook
Your Port ReplicatorThe Port Replicator is a device that helps you to quickly connect your notebook toyour peripheral devices, such as a monitor, printer etc.
The features offered by the Port Replicator include standard ports formonitor, audio, mouse and keyboard.
You need only dock the notebook in order to work with your peripheral devices.
Ports on the Port ReplicatorPortReplicatorPorts
121
2
3
1110
98
76
54
1 = Headphone jack (left), microphonejack (right)
2 = ON/OFF button3 = Connector on the Port Replicator for the
docking port on the bottom of the notebook4 = Unlocking lever5 = DC input connector
6 = USB ports 1 (Gen 1) (USB Type-C™) 7 = USB ports 3.08 = Displayports8 = DVI-D monitor port9 = VGA monitor port11 = LAN port12 = Security Lock device
The DVI port and the neighboring Displayport cannot be used at the same time.
Fujitsu 47
Working with the notebook
Connecting the notebook to the Port ReplicatorThe AC adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD screen closed when the notebook is connected to the Port Replicator. The resulting overheating can cause reduced performance and increased activity of the integrated fan.
PortReplicator
► Disconnect the AC adapter cable from the DC input (DC IN) of the notebook.
1
► Position the notebook so that it is in line with the back edge of the Port Replicator.► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
48 Fujitsu
Working with the notebook
Connecting the AC adapter to the Port Replicator
3
1
2
► Connect the power cable to theAC adapter (1).
► Plug the power cable into the DC inputconnetor( 2).
► Connect the AC adapter cable to the DCinput connector (DC IN) of thePort Replicator (3).
When the notebook is connected to a Port Replicator, the operating system createsa hardware profile for the "Docked" mode. In this profile, for example, the setting issaved as to which monitor was last used for output. This profile will be loaded, assoon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator► Press the ON/OFF button on the port
replicator to switch the notebook on.The power-on indicator of the PortReplicator lights up.
Fujitsu 49
Working with the notebook
Disconnecting the notebook from the Port Replicator
2
1
► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebookunlatch.
► Lift off the notebook (2).
50 Fujitsu
Security functions
Security functionsSecurityfunctions
Your notebook has several security features that you can use to secure your system from unauthorized access.
This chapter explains how to use each function, and what the benefits are.
Please remember that in some cases, for example, forgetting your password,you may be locked out and unable to access your data. Therefore,please note the following information:
• Make regular backups to external data carriers such as external harddrives, CDs, DVDs or Blu-ray Discs.
• Some security functions need you to choose passwords. Make a noteof the passwords and keep them in a safe place.
If you forget your passwords you will need to contact the our ServiceDesk. Deletion or resetting of passwords is not covered by your warrantyand a charge will be made for assistance.
Configuring the fingerprint sensorFingerprintsensorFingerprintsensor
Whether or not your device has a fingerprint sensor depends on thedevice configuration you have ordered.
The fingerprint sensor can record an image of a fingerprint. With additional fingerprintsoftware, this image can be processed and used instead of a password.
1
► You must install the fingerprint softwarein order to be able to use thefingerprint sensor (1).
The current Workplace Protect software for palm vein and fingerprint sensors can be found on the Internet athttp://www.fujitsu.com/us/support/
Fujitsu 51
Security functions
Configuring the palm vein sensorPalmveinsensorPalmveinsensor
Whether your device has a palm vein sensor depends on the deviceconfiguration you have ordered.
The palm vein sensor can record the image of the pattern of the veins of the hand. This imageis evaluated by additional software and can be used instead of a password.
1
► To be able to use the palm vein sensor(1), you must install the software.
The current Workplace Protect software for palm and fingerprint sensors can be found on the Internet athttp://www.fujitsu.com/us/support
Using the Security LockYour device comes with a Security Lock mechanism for the Kensington Lock Cable. Youcan use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebookfrom theft. The Kensington Lock Cable is available as an accessory.
Fujitsu recommends the use of a combination lock.
K
► Fit the Kensington Lock Cable to themechanism on your notebook.UsingtheKensingtonLockCableSecurityLockMechanicalbackupAnti-theftprotection
Attach another Kensington Lock Cable to your Port Replicator to protect your PortReplicator from theft as well. There are two security lock devices on your Port Replicator.
52 Fujitsu
Security functions
Configuring password protection in BIOS Setup UtilityBefore using the various options for password protection in the BIOS Setup utilityto increase data security, please observe the following:
Make a note of the passwords and keep them in a safe place. If you forget yoursupervisor password you will not be able to access your notebook. Deletion of thepassword is not covered by your warranty and a charge will be made for assistance.Passwordprotection
Your password can be up to eight characters long and contain letters and numbers.No distinction is made between uppercase and lowercase.
Protecting BIOS Setup Utility (supervisor and user password)If you have opened these operating instructions on the screen, werecommend that you print them out. You cannot call the instructions ontothe screen while you are setting up the password.
BIOSSetupUtility
The supervisor password and the user password both prevent unauthorized use of the BIOS Setup Utility. With the aid of the supervisor password you can access all of the functions of the BIOS Setup Utility, while the user password will only give you access to some of the functions. You can only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 79 for a descriptionof how to call up and operate the BIOS-Setup-Utility.
Assigning the supervisor and user passwords► Start the BIOS Setup Utility and go to the Security menu.► Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password.► Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.► Enter the password again and press the Enter key.
Changes have been saved is a confirmation that the new password has been saved.► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.If you do not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.► Select Yes and press the Enter key.
PasswordSupervisorpasswordUserpassword
The notebook is then rebooted and the new password comes into effect. It will now be necessaryto first enter your supervisor or user password in order to open the BIOS Setup Utility. Pleasenote that the user password only provides access to a few of the BIOS settings.
Fujitsu 53
Security functions
Changing the supervisor or user passwordYou can only change the supervisor password when you have logged into theBIOS Setup Utility with the supervisor password.PasswordSupervisorpasswordUserpassword
► Call the BIOS Setup Utility and go to the Security menu.► When changing the password, proceed exactly as for password assignment.
Removing passwordsTo remove a password (without setting a new password) perform the following steps:PasswordSupervisorpasswordUserpassword
► Start the BIOS Setup Utility and go to the Security menu.► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.You will be requested to enter a new password by the Enter New Password prompt.
► Press the Enter key twice.► In the Exit menu, select the option Save Changes & Exit.► Select Yes and press the Enter key.
The notebook will now reboot with the password removed.Removing the supervisor password simultaneously deactivates the user password.
Password protection for booting of the operating systemWith the supervisor password you have set in the BIOS Setup Utility (seesection "Assigning the supervisor and user passwords", Page 57), you canalso prevent starting of the operating system.Operatingsystem
Activating system protection► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.► Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key► Select the Save Changes & Exit option under Exit.
The notebook reboots. You will be prompted to enter your password (the supervisor password).
Deactivating system protection► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.► Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.
54 Fujitsu
Security functions
Password protection for the hard diskIf a supervisor password has been assigned, a password for the hard disk canalso be set in the Hard Disk Security menu.
The hard disk is protected by this password. Data on this hard disk can only be readinto another system if the correct password has been entered.
Trusted Platform Module (TPM) (device-dependent)TPMTrustedPlatformModule
To use the TPM, you must activate the TPM in the BIOS Setup before the softwareis installed. The condition for this is that you have assigned at least the supervisorpassword (see "Security functions", Page 55).
Enabling TPM• Requirement: You have set a supervisor password, see "Security functions", Page 55.► Call up the BIOS Setup and select the Security menu.► Mark the TPM (Security Chip) Setting field and press the Enter key► Select the "Security Chip" "Enabled" entry to activate the TPM
Once you have activated the TPM through a reboot, the Clear Security Chip menu option appears.With Clear Security Chip, you can delete the owner in the TPM, if the TPM has alreadybeen used. With Enabled, all secret keys generated by applications (e.g. SRK - StorageRoot Keys, AIK - Attestation Identity Keys, etc.) are deleted.
Please note that you will then no longer be able to access the data you haveencrypted with the keys based on that holder.
► Select the Exit Saving Changes option in the Exit menu.► Press the Enter key and select Yes.
The notebook will restart, and TPM will be enabled after the reboot.
Disabling TPM• Requirement: You have set a supervisor password, see "Security functions", Page 55.► Call up the BIOS Setup and select the Security menu.► Mark the TPM (Security Chip) Setting field and press the Enter key.► Select the "Security Chip" "Disabled" entry to deactivate the TPM► From the Exit menu, choose the option Exit Saving Changes.► Press the Enter key and select Yes.
Your notebook will now restart and TPM will be disabled.
Fujitsu 55
Security functions
SmartCard readerSecurityfunctions,Securityfunctions
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply withthe ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software you can use your SmartCard as an alternative to password protection,but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two SmartCards. Always keep one of the SmartCardsin a safe place if you are carrying the other SmartCard with you.
In order to be able to take advantage of all the security features of your notebook,you will need a CardOS SmartCard from Fujitsu.
The SmartCard can only be used with a PIN, offering maximum protection even ifyou lose the SmartCard. In order to maximise your security, the CardOS SmartCardis disabled if three incorrect attempts are made to enter the PIN.
When you use the CardOS SmartCard for the first time, you will either need to enter thepreset PIN "12345678" or the PIN given to you by your systems administrator.
Inserting the SmartCardDo not use force when inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard reader.
► Slide the SmartCard into the SmartCardreader with the chip facing upwards (onsome variants it faces down) and to the front.
56 Fujitsu
Connecting external devices
Connecting external devicesAlways refer to the safety information provided in "Important notes", Page 18 beforeconnecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices such as USB devices, it is not necessary to switch offthe notebook and the device before connecting/disconnecting. For moreinformation about whether or not devices need to be switched off, please referto the documentation supplied with the external device.
Some of the external devices require special drivers (see the operatingsystem and external device documentation).
Fujitsu 57
Connecting external devices
Connecting an external monitorAn analog monitor is connected to the analog VGA monitor port, a digital monitor to the Displayport or the DVI-D monitor port on the optional Port Replicator. Screen output is limited to a maximum of two external sreens at any one time (see "Key combinations", Page 32, section "Toggle output screen").MonitorVGAconnectionsocketMonitorportMonitorport
Digital Displayport (on notebook or on optionalPort Replicator)
Analog VGA monitor port (on notebook or on optional port replicator)
Digital DVI-D monitor port (on the optional PortReplicator)
► Switch off the notebook and the external monitor.► Plug the data cable of the external monitor into the monitor port.► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of thenotebook, see chapter "Key combinations", Page 32.
You can display the same picture on the external monitor and thenotebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional PortReplicator available for your notebook.
58 Fujitsu
Connecting external devices
HDMI portHDMIport
Depending on the device variant, your device may include an integralHDMI port (only LIFEBOOK U757).
The HDMI port on your notebook can be used to connect an external amplifier,LCD TV or a plasma TV with an HDMI connection.
► Connect the data cable to theexternal device.
► Connect the data cable to the HDMIport of the notebook.
Fujitsu 59
Connecting external devices
Connecting USB devicesUSBports
On the USB ports, you can connect external devices that also have a USB port(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data transfer rate of up to 5 Gbit/s.
USB 3.1 (Gen1) has a data transfer rate of up to 5 Bbit/s
USB 3.1 (Gen 2) has a data transfer rate of up to 10 Gbit/s.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to theexternal device.
► Connect the data cable to a USBport of the notebook.
Device driversUSB devices will be automatically recognized and installed by your operating system.
60 Fujitsu
Connecting external devices
USB port with charging function (USB Type-C™)USBportwithchargingfunction(USBType-C™)
At this USB Type-C™ 3.1 (Gen 1) port, you can charge a connected USB device or operate devices withoutan additional power supply (e.g. a monitor or printer).
The USB Type-C™ connector is reversible and both ends of the cable are identical. This means the connector may be inserted into the port in either orientation, there is no "right side up", and using either end of the cable is fine.
Charging is also possible when the notebook is switched off, if the USB Type-C Power Delivery on System-Off function is activated in the Advanced - Miscellaneous Configurations menu of the BIOS-Setup-Utility. Please refer to section "Settings in BIOS Setup Utility", Page 79 for a description of how to call up and operate the BIOS-Setup-Utility.
USB devices are hot-pluggable. This means you can connect and disconnectthe cables of USB devices while the system is running.
Additional information can be found in the documentation for the USB devices.
+
► Connect the data cable to theexternal device.
► Connect the data cable to a USB port(USB Type-C™) of the notebook.
Fujitsu 61
Connecting external devices
USB port with charging function (Anytime USB charge)You can use this USB port to charge or supply power to a connected USB device (e.g.to charge a PDA or a mobile phone or to connect a USB lamp).
Charging is also possible when the notebook is switched off, if the Anytime USB Charge function is activated in the Advanced menu of the BIOS Setup Utility. If the setting AC is selected,the device will only be charged when the AC adapter is connected.
Please refer to section "Settings in BIOS Setup Utility", Page 79 for a descriptionof how to call up and operate the BIOS-Setup-Utility.USBchargingfunction
It is recommended that the notebook be operated with the power supply connected whenever the USB port with charging function is in use, as this function will drain the battery more quickly if an external USB device is being charged.
The power supply unit must already be connected when the notebook is switched off, as otherwise the USB charging function will be disabled andthe connected USB devices will not be charged.
Some USB devices (e.g. mobile telephones) require a driver in order to use the USB charging function. In this case the USB charging function will not work when the notebook is switched off, as no drivers are active when the notebook is switched off.
► Connect the data cable to theexternal device.
► Connect the data cable to a USB port(Anytime USB charge) of the notebook.
How to remove USB devices correctlyAlways correctly remove the device according to the rules described below,to ensure that none of your data is lost.
► Left click on the icon to safely remove hardware, located in the taskbar.► Select the device which you want to shut down and remove.► Press the Enter key. Wait for the dialog box which tells you that it is now safe to remove the device.
62 Fujitsu
Connecting external devices
Headset portConnectingaudiodevicesAudioportsConnectingheadphones
You can connect a headset, headphones or external loudspeakers to yournotebook via the headset port.
► Connect the audio cable to theexternal device.
► Connect the audio cable to the headsetport of the notebook.The internal loudspeakers are disabled.
If you buy a cable from a retailer, please note the following information:
The headset port on your notebook is a "3.5 mm jack socket".
If you want to connect a headset, headphones or loudspeakers, youwill need a "3.5 mm jack plug".
Fujitsu 63
Removing and installing components during servicing
Removing and installing componentsduring servicing
The illustrations shown below may differ from your actual device. They are merely intended to clarify the principles involved.
Only qualified technicians should repair your notebook. Unauthorized opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty.SCoermvicpoinngents
After consulting the Hotline/Service Desk, you may remove and install thecomponents described in this chapter yourself.
If you remove and install components without consulting the Hotline/ServiceDesk, then the warranty of your notebook will be voided.
Notes on installing and removing boardsand components• Switch the notebook off and pull the power plug out of the power outlet• Always remove the battery.• Take care when you use the locking mechanisms on the battery and any other component.• Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with electrostatic sensitive devices (ESD) are marked with the labelshown.
When handling boards fitted with ESDs, you must always observe the followingpoints:
• You must always discharge static build up (e.g. by touching a groundedobject) before working.
• The equipment and tools you use must be free of static charges.• Remove t eh power plug from the power outlet before inserting or removing
boards containing ESDs.• Always hold boards with ESDs by their edges.• Never touch pins or conductors on boards fitted with ESDs.
64 Fujitsu
Removing and installing components during servicing
Preparing to remove componentsIf you are going to remove or change system components, prepare for the removal as follows:
Please observe the safety information in chapter "Important notes", Page 18.
Remove the power plug from the AC outlet!
► Switch the device off.
The device must not be in energy-saving mode !
► Close the LCD screen.► Remove all the cables from the device.► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.► Remove the battery (see "Removing a battery", Page 40).
Installing and removing memory expansionMemorymoduleMainmemoryRemovingmemorySystemexpansionSystemexpansion
If you are asked by the Hotline/Service Desk to remove and install the memoryexpansion yourself, proceed as follows:
Please observe the safety information in chapter "Important notes", Page 18.
When installing/removing memory modules, the battery must be removed fromthe notebook and the notebook must not be connected to the power supply,see "Preparing to remove components", Page 69.
Only use memory expansion modules that have been approved for yournotebook (see "Technical data", Page 90).
Never use force when installing or removing a memory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
You must open the service compartment to remove or install a memory module. On some devices, opening the compartment may expose other components. These components should be removed and replaced only by authorized specialists. Therefore, be sure to observe the following:
Individual components can become very hot during operation. Therefore, werecommend that you wait one hour after switching off the notebook before removingor installing memory modules. Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please takenote of chapter "Notes on installing and removing boards and components", Page 68.
Fujitsu 65
Removing and installing components during servicing
Removing a cover► Prepare for removal, see "Preparing to remove components", Page 69.
1
2
► Remove the screw (1).
Keep the screw in a safe place.
► Lift the cover off the notebook (2).
Removing memory modules
32
1
1
► Carefully push the two mountingclips outwards (1).MemoryexpansionMemorymodule
The memory module snaps upwards (2).► Pull the memory module out of its slot
in the direction of the arrow (3).
66 Fujitsu
Removing and installing components during servicing
Installing a memory module
2
a
1
► Insert the memory module with the contactsand the recess (a) facing the slot (1).MemoryexpansionMemorymodule
► Carefully push the memory moduledownwards until you feel it clickinto place (2).
Attaching the cover
1
2
► Place the cover in the correct mounting position (1).► Tighten the screw (2).► Complete the installation, see "Finishing component removal", Page 78.
Fujitsu 67
Removing and installing components during servicing
Installing and removing an M.2 moduleLIFEBOOK U727 and LIFEBOOK U747 are equipped with a compartment for a M.2module. In LIFEBOOK U757, you can either install a M.2 module (with a correspondingM.2 adapter) or a standard hard disk drive (HDD, without the M.2 adapter), see "Removingand installing hard disk (HDD, LIFEBOOK U757 only)", Page 75.
Removing a cover
1
1
2
► Remove the screws (1).
Keep the screws in a safe place. If you are removing more than one component atthe same time, store the screws for the individual components separately from eachother. If you install the wrong screws, components may be damaged.
The screws are not all the same length and when the cover is installed,the correct screws must be used.
► Lift the cover off the notebook (2).
68 Fujitsu
Removing and installing components during servicing
Installing an M.2 module► LIFEBOOK U757: If applicable, insert the M.2 adapter into the compartment.
1
2
► Insert the M.2 module at a slight angle in the direction of the arrow (1)into the slot on the mainboard.
► Fasten the M.2 module in place in the slot with the screw (2).
Removing an M.2 module
21
► Undo the screw (1).The M.2 module snaps slightly upwards.
► Pull the M.2 module in the direction of the arrow (2) and out of the slot onthe mainboard and remove it from the casing.
► LIFEBOOK U757: If you want to install a HDD instead of a new M.2 module, remove theM.2 adapter (located beneath the M.2 module) from the compartment and install the HDD,see "Removing and installing hard disk (HDD, LIFEBOOK U757 only)", Page 75.
Fujitsu 69
Removing and installing components during servicing
Attaching the cover
2
2
1
► Place the cover in the correct mounting position (1).► Tighten the screws (2).
70 Fujitsu
Removing and installing components during servicing
Removing and installing hard disk (HDD,LIFEBOOK U757 only)In LIFEBOOK U757, you can either install a M.2 module (with a correspondingM.2 adapter, see "Installing and removing an M.2 module", Page 72) or a standardhard disk drive (HDD, without the M.2 adapter).
Removing a hard disk► Remove the cover, see "Removing a cover", Page 72.
For easier removal from the device, the hard disk is installed in a hard disk carrier.
1
1
2
► Pull the hard disk in direction of the arrow (1).► Loosen the connector of the hard disk (2).► Remove the hard disk from the hard disk compartment.
Fujitsu 71
Removing and installing components during servicing
3
► Remove the hard disk from the hard disk carrier (3).► If you want to install a M.2 module instead of a new HDD, disconnect the hard disk
cable from the mainboard, insert the M.2 adapter into the compartment and install theM.2 module, see "Installing and removing an M.2 module", Page 72.
72 Fujitsu
Removing and installing components during servicing
Installing a hard disk► If applicable, remove the M.2 adapter from the compartment.
Always install the hard disk into the device in the corresponding hard disk carrier.
1
► Slide the hard disk into the hard disk carrier.
3
3
2
► Attach the connector to the hard disk (2).► Place the hard disk into the hard disk compartment (3).► Connect the hard disk cable to the mainboard.► Re-fasten the cover, see "Attaching the cover", Page 74.
Fujitsu 73
Removing and installing components during servicing
Finishing component removalAfter you have removed or changed the system components as you required, pleaseprepare your device for operation again as follows:
► Install the battery again (see "Installing a battery", Page 41).► Turn the notebook the right way up again and place it on a flat surface.► Reconnect the cables that you disconnected before.
74 Fujitsu
Settings in BIOS Setup Utility
Settings in BIOS Setup UtilityBIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupSystemconfigurationHardwareconfiguration
The BIOS Setup Utility allows you to set the system functions and the hardwareconfiguration for the notebook.
When it is delivered, the notebook is set to factory default settings. You canchange these settings in BIOS Setup Utility. Any changes you make take effect assoon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
About Displays information relating to the BIOS, processor and notebookSystem Advanced system settingsAdvanced Configuration of various hardware components, such as mouse, keyboard,
processorSecurity Password settings and security functionsBoot Configuration of the start-up sequenceExit Exits the BIOS Setup Utility
Starting the BIOS Setup Utility► Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtility
Depending on the Fast Boot setting in the BIOS Setup utility, the followinginformation may appear on the screen during start:<F2> BIOS Setup <F12> Boot Menu
► Press the key by itself F2 .► If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator or contact our customer service center
The BIOS Setup Utility starts.
Fujitsu 75
Settings in BIOS Setup Utility
Operating BIOS Setup UtilityBIOSSetupUtility
Press the F1 key to display help on the operation of the BIOS Setup Utility. The descriptionof the individual settings is shown in the right-hand window of the BIOS Setup Utility.
With the F9 key you can load the default settings of the BIOS Setup Utility.
► Use the cursor keys ← or → to select the menu you wish to access to make changes.The menu is displayed on the screen.
► Select the option you want to change with the cursor keys ↑ or ↓ .► Press the Enter key.► Press the ESC key to exit the selected menu.► For future reference, make a note of the changes you have made (for example, in this manual).
76 Fujitsu
Settings in BIOS Setup Utility
Exiting BIOS Setup UtilityBIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The notebook is rebooted and the new settings come into effect.
Exit Discarding Changes – Discard changes andexit BIOS Setup Utility► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOSSetup Utility is terminated and the notebook is rebooted.
Load Setup Defaults – Copy Standard Entries► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes – Discard changes without exitingthe BIOS Setup Utility► To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective.You can now make additional settings in the BIOS Setup Utility.
► If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Changes - save changes without exitingthe BIOS Setup Utility► To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility.► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off► To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
Fujitsu 77
Troubleshooting and tips
Troubleshooting and tipsTroubleshootingTipsFaultTroubleshooting
Follow the safety notes in the "Safety/Regulations" manual whenconnecting or disconnecting cables.
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
► Make a note of the steps and the circumstances that led to the fault. Alsomake a note of any error messages displayed.
► Switch the notebook off.► Please contact the Hotline/Service Desk.
General Inquires Phone 1-888-FUJITSU Have the following information ready when you call:
• The model name and serial number of the notebook. The serial number islocated on a sticker on the underside of the notebook.
• Notes of any messages that appear on the screen and information on acoustic signals.• Any changes you have made to the hardware or software since
receiving the notebook.• Any changes you have made to the BIOS Setup settings since receiving the notebook.• Your system configuration and all peripheral devices connected to your system.• Your sales contract.
Our notebooks have been designed primarily with mobile applications in mind. This means that considerable effort has been made to optimise components and equipment in terms of weight, space and energy requirements. Depending on the particular configuration you have purchased, it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: http://www/fujitsu.com/us/support/
Help if problems occurShould you encounter a problem with your computer that you cannot resolve yourself:
► Note the ID number of your device. The ID number is found on the type rating plateon the back or underside of the casing.
78 Fujitsu
Troubleshooting and tips
Restoring the hard disk contents under WindowsHarddisk:Operatingsystem,restoring
You can use the "Windows Recovery CD" (optionally available) and the "Drivers & UtilitiesCD/DVD" to reinstall the operating system.
The instructions are provided on the case of the Recovery CD.
During the reinstall process your personal files and any installed programswill be deleted. We advise you to backup your files to an external harddrive, or CD / DVD disk before you start.
► Switch the notebook on.Depending on the Fast Boot setting in the BIOS Setup utility, the followinginformation may appear on the screen during start:<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appears, press the function key F12 .► Insert the "Windows Recovery CD" into the optical drive.► Select CD-ROM and press the Enter key.► Follow the instructions on the screen.
After the installation you must install all the drivers again. Some installed hardwarecomponents will not be correctly supported until this has been done.
► Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically.► Click on the Desk Update button.► Select Automatic driver installation (Express) and click on Start installation.► Follow the instructions on the screen.► Restart your notebook when the driver installation is completed.
The notebook’s date or time is incorrectTimenotcorrectTimenotcorrectIncorrectdate/timeDateisincorrect
Cause TroubleshootingTime and date are incorrect. ► With the BIOS-Setup-Utility, you can set the
date and time in the main menu.If the time and date are still set incorrectly afterswitching on the notebook.
► Please contact your sales outlet or ourHotline/Service Desk.
When certain characters are entered on thekeyboard, only numerals are writtenCause TroubleshootingThe virtual numeric keypad of your device isactivated, see "Virtual numeric keypad", Page 31
► Press the Num key.
Fujitsu 79
Troubleshooting and tips
The notebook’s LCD screen remains blankLCDscreenLCDscreenistoodark
Cause TroubleshootingMonitor is switched off. ► Press a key or touch the touchpad.External monitor or television set connected. ► Press the key combination to switch the
screen output, see "Key combinations",Page 32.
The LCD screen is difficult to readLCDscreenLCDscreen
Cause TroubleshootingReflected glare ► Turn the notebook or alter the tilt of the LCD
screen.► Increase the brightness of the screen.
The external monitor remains blankMonitor
Cause TroubleshootingMonitor is switched off. ► Switch the external monitor on.Power saving has been activated (monitor isblank).
► Press any key to continue.
Brightness is set to dark. ► Adjust the brightness of the monitor.Screen output is set to the notebook’s LCDscreen
► Press the key combination to switch thescreen output, see "Key combinations",Page 32.
The external monitor’s power cable or datacable is not connected properly.
► Switch off the external monitor and thenotebook.
► Check whether the power cable is pluggedproperly into the external monitor and intothe power outlet.
► Check whether the data cable is properlyconnected to the notebook and the externalmonitor (if it is plugged in with a connector).
► Switch on the external monitor and thenotebook.
80 Fujitsu
Troubleshooting and tips
The external monitor is blank or the image is unstableScreenMonitor
Cause TroubleshootingThe wrong external monitor has been selectedor the wrong screen resolution has been set forthe application program.
► Terminate the application program inWindows by pressing Alt + F4 . If thefault persists after closing the program, usethe key combination for switching the screenoutput (see "Key combinations", Page 32) toswitch over to the notebook’s LCD screen.Change the following setting:
► Set the screen resolution: Set the screenresolution as described in the documentationfor your operating system.
► Select monitor: Select monitor 1 or 2 asdescribed in the documentation for youroperating system.
The notebook cannot be startedNotebook
Cause TroubleshootingThe battery is not installed correctly. ► Check whether the battery is installed
correctly in its compartment.► Switch the notebook on.
The battery is dead. ► Charge the battery.
or► Insert a charged battery.
or► Connect the AC adapter to the
notebook.The power adapter is not connected correctly. ► Check whether the AC adapter is
connected correctly to the notebook.► Switch the notebook on.
Fujitsu 81
Troubleshooting and tips
The notebook stops workingNotebookEnergysavingmode
Cause TroubleshootingNotebook is in energy saving mode. ► Leave energy saving mode.An application programme has caused themalfunction.
► Close the application program or restartthe notebook (by restarting the operatingsystem or switching the device off and backon again).
The battery is dead. ► Charge the battery.
or
or
► Insert a charged battery.
► Connect the AC adapter to thenotebook.
The printer does not printPrinterdoesnotprint
Cause TroubleshootingThe printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to thedocumentation supplied with the printer).
The printer is not connected correctly. ► Check that the data cable connectingthe notebook to the printer is properlyconnected.
The printer driver is faulty or not correctlyinstalled, or it is the wrong printer driver.
► Check that the data cable connectingthe notebook to the printer is properlyconnected.
► Check whether the correct printer driver isloaded (refer to the printer documentation).
The wireless connection to a network does not workThewirelessconnectiontoanetworkdoesnotwork
Cause TroubleshootingThe wireless component is disabled. ► Switch the wireless component on (see
"Switching the wireless components on andoff", Page 49).
The wireless component is enabled. Despitethis, the wireless connection to a network doesnot work.
► Check whether the wireless connection isswitched on via the software.
► Further information on using the wirelesscomponent can be found in the help files.
82 Fujitsu
Troubleshooting and tips
Acoustic warningsAcousticerrormessagesErrors
Cause TroubleshootingA beep sounds every few seconds.
The battery is almost flat.
► Charge the battery.
SmartCard reader is not recognized.Cause TroubleshootingChip card inserted incorrectly. ► Make sure you have inserted your
SmartCard into the SmartCard readerwith the chip facing upwards/downwards(device-dependent).
► Check whether the SmartCard you are usingis supported. Your SmartCard must complywith the ISO standard 7816-1, -2, -3 and -4.
SmartCard PIN forgottenCause TroubleshootingPIN forgotten ► If you are working in a network, contact your
system administrator, who can unlock yournotebook with a Supervisor PIN.
SmartCard lostCause TroubleshootingSmartCard lost ► If you are working in a network, contact your
system administrator, who can boot up yournotebook with a Supervisor SmartCard.
Fujitsu 83
Troubleshooting and tips
Error messages on the screenErrormessagesonthescreenErrormessage:
This section describes the error messages generated by the BIOS Setup. Error messages displayedby the operating system or programmes are described in the relevant documentation.
If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service center.
Error message/cause ResolutionCMOS battery bad
If the error message occurs repeatedly, thebuffer battery in the notebook is flat.
► Contact your sales outlet or our customerservice center.
System CMOS checksum bad - default configurationused
The system configuration information isincorrect.
► Switch the notebook off.► Switch the notebook on.► Press the function key F2 to access the
BIOS Setup.► In the BIOS Setup, select the Exit menu.► Select the entry Load Setup Defaults.► Select OK and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits:zzzz zzzz
When testing the extended memory an error hasresulted at the address xxxx.
► Check whether the additional memorymodule has been inserted correctly.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
► Start the BIOS Setup (Primary Mastersubmenu) and select the correct settings.
Keyboard controller error ► Switch the notebook off using with theON/OFF button.
► Wait 3 - 5 seconds and switch on thenotebook again.
Keyboard error If you are using an external keyboard:
► Check the connection and reboot thenotebook.
nn Stuck key ► Make sure that no key is pressed.Operating system not found ► Check in the BIOS Setup whether your hard
disk has been set correctly.► Make sure that the operating system is
installed on the corresponding drive.Press <F1> to resume, <F2> to SETUP
This error message appears if an error occursduring the self-test before starting the operatingsystem.
► Press the F1 function key to start theoperating system.
► Press the function key F2 to access theBIOS Setup.
84 Fujitsu
Troubleshooting and tips
Error message/cause ResolutionPrevious boot incomplete - Default configurationused Due to an error during the previous systemboot, default values were used for certainsettings. Check the settings in the BIOS Setup.
► Press the F1 function key when promptedto do so.
Real time clock error ► Contact your sales outlet or our customerservice center.
nnnnK Shadow RAM failed at offset: xxxx FailingBits: zzzz
► Contact your sales outlet or our customerservice center.
System battery is dead - Replace and run SETUP ► Contact your sales outlet or our customerservice center.
System cache error - Cache disabled ► Contact your sales outlet or our customerservice center.
System timer error ► Contact your sales outlet or our customerservice center.
Fujitsu 85
Technical data
Technical dataTechnicaldata
LIFEBOOKTechnicaldata
LIFEBOOK U727 LIFEBOOK U747 LIFEBOOK U757Ambient conditionsOperating temperature 5 °C .... 35 °C / 41°F .... 95°FTemperature in transit –15 °C .... 60 °C / 5°F .... 140°FDimensionsWidth x depth x height Device with LCD
screen without touchfunction:
• 302 mm x209 mm x19.0 mm /11.89” x 8.23” x0.75”
Device withTouchscreen:
• 302 mm x209 mm x19.6 mm /11.89” x 8.23” x0.77”
Device with LCDscreen without touchfunction:
• 332.6 mm x234 mm x19.0 mm /13.09” x 9.21” x0.75”
Device withTouchscreen:
• 332.6 mm x234 mm x 19.6mm /13.09” x 9.21” x0.77”
Device with LCDscreen without touchfunction:
• 378 mm x256 mm x19.2 mm /14.88” x 10.08” x0.76”
Device withTouchscreen:
• 378 mm x256 mm x19.6 mm /14.88” x 10.08” x0.77”
Weight (without opticaldrive)
Device with LCDscreen without touchfunction:
• 1.28 kg /2.82 lbs
Device withTouchscreen:
• 1.43 kg /3.15 lbs
Device with LCDscreen without touchfunction:
• 1.52 kg /3.35 lbs
Device withTouchscreen:
• 1.71 kg /3.77 lbs
Device with LCDscreen without touchfunction:
• 1.72 kg /3.79 lbs
Device withTouchscreen:
• 1.92 kg /4.23 lbs
Main memorySlots 2 slots 260 pin DDR4 - 2133 SO-DIMM with a total of max. 32 GByteApproved memorymodules
4 GByte, 8 GByte or 16 GByte DDR4 - 2133 SO-DIMM
The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at www.fujitsu.com/us.
86 Fujitsu
Technical data
Rechargeable batteryYou can find information on the batteries used in your device on the Internet at www.fujitsu.com/us
LIFEBOOK U727:3-cell battery 45Wh
LIFEBOOK U747/U757:4-cell battery 50 Wh
Rated voltage 10.8 V 14.4 VRated capacity 4170 mAh 3490 mAh
AC adapterTechnicaldata
Electrical dataPrimary 65 W / 90 WRated voltage 100 V – 240 V (automatic)Rated frequency 50 Hz – 60 Hz (automatic)SecondaryRated voltage 19 VMax. rated current 3.42 A / 4.74 A
An additional AC adapter or power cable can be ordered at any time.
Fujitsu 87
Manufacturer’s notes
Manufacturer’s notesDisposal and recyclingNotes
You can find information on this subject on your notebook or on our websitehttp://solutions.us.fujitsu.com/www/content/produts/trade-in_program/
Declarations of ConformityFujitsu hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Declarationo
88 Fujitsu
Manufacturer’s notes
ENERGY STAR ComplianceYour Fujitsu system is an ENERGY STAR qualified mobile PC. Bychoosing a computer with the latest energy-saving technology, you’rehelping to preserve our environment for future generations. ENERGYSTAR is a joint program of the U.S. Environmental Protection Agency,U.S. Department of Energy, Natural Resources Canada, and othergovernments around the world helping us save money while protectingthe environment through energy efficient products and practices. Withenergy costs and global warming top-of-mind for consumers, Fujitsu iscommitted to offering solutions that help consumers conserve energyand improve the quality of our environment.
Sleep mode:You will notice that your computer is initially set so that the display turns off after 10 minutes ofuser inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. Whengoing into Sleep mode, the computer also reduces the speed of any active Ethernet networklinks. To “wake” the computer from Sleep mode, press the Suspend/Resume Button.
Energy saving benefits:Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standardequipment – saving half in utility costs. But more than that, ENERGY STAR also makes a differencefor the environment. Did you know that the average house can be responsible for twice thegreenhouse gas emissions as the average car? That’s because every time you flip on a lightswitch, run your dishwasher, or turn on your PC, you use energy, which means more greenhousegas emissions from power plants. So the more energy we can save through energy efficiency,the more we help to reduce greenhouse gases and the risks of global warming.
To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".
To read about how Fujitsu is supporting Sustainable Management along withseveral other environmental activities, visit the Fujitsu Corporate Citizenship page at:"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php".
Declarations of conformityDeclarationsofconformity
This device complies with Part 15 of the FCC Rules. Operations are subject to the following twoconditions: (1) This device may not cause harmful interference, (2) this device must accept anyinterference received, including interference that may cause undesired operation.
89 Fujitsu
Manufacturer’s notes
FCC and IC Regulatory InformationPlease note the following regulatory information related to the wireless LANdevice.
Regulatory Notes and StatementsWireless LAN, Health and Authorization for useRadio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels ofthese emissions, however, are far much less than the electromagnetic energy emissions from wirelessdevices such as mobile phones. Wireless LAN devices are safe for use by consumers because theyoperate within the guidelines found in radio frequency safety standards and recommendations. Theuse of Wireless LAN devices may be restricted in some situations or environments, such as:
• On board an airplane, or• In an explosive environment, or• In situations where the interference risk to other devices or services is
perceived or identified as harmful.In cases in which the policy regarding use of Wireless LAN devices in specific environments isnot clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtainauthorization to use these devices prior to operating the equipment.
Regulatory Information/DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance with the instructionsincluded in the user documentation provided with the product. Any changes or modifications madeto this device that are not expressly approved by the manufacturer may void the user’s authority tooperate the equipment. The manufacturer is not responsible for any radio or television interferencecaused by unauthorized modification of this device, or the substitution or attachment of connectingcables and equipment other than those specified by the manufacturer. It is the responsibility of theuser to correct any interference caused by such unauthorized modification, substitution or attachment.The manufacturer and its authorized resellers or distributors will assume no liability for any damageor violation of government regulations arising from failure to comply with these guidelines.
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it isrestricted to indoor environments, and the antenna of this device must be integral.
Federal Communications Commission and Industry Canada statement:This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not causeinterference, and, (2) This device must accept any interference, including interferencethat may cause undesired operation of this device.
Fujitsu 90
Manufacturer’s notes
Déclaration d’Industrie CanadaCet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s)RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnementest soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférencenuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris cellespouvan t causer un mauvais fonctionnement de l’appareil.
FCC Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy. If not installed and used in accordance withthe instructions, it may cause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try andcorrect the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.2. Increase the distance between the equipment and the receiver.3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.4. Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure statementThe available scientific evidence does not show that any health problems are associated withusing low power wireless devices. There is no proof, however, that these low power wirelessdevices are absolutely safe. Low power wireless devices emit low levels of radio frequencyenergy (RF) in the microwave range while being used. Whereas high levels of RF can producehealth effects (by heating tissue), exposure to low-level RF that does not produce heatingeffects causes no known adverse health effects. Many studies of low-level RF exposure havenot found any biological effects. Some studies have suggested that some biological effectsmight occur, but such findings have not been confirmed by additional research.
The wireless LAN radio device has been tested and found to comply with FCC radiationexposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency(RF) Exposure Guidelines in Supplement C to OET65.
The exposure standard for wireless devices employs a unit of measurement known as the SpecificAbsorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.
This device is compliant with SAR for general population /uncontrolled exposure limits inANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance withthe measurement methods and procedures specified in OET Bulletin 65 Supplement C,and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposureguidelines when tested with the device operating conditions.
91 Fujitsu
Manufacturer’s notes
Déclaration de la FCC/d’Industrie Canada sur l’expositionaux radiofréquencesLa norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unitéde mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ontdéfini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limitesd’exposition générales de la population/non contrôlées définies par les règles C95.1-1992 del’ANSI/IEEE et RSS 102 d’Industrie Canada ; il a été testé en conformité avec les méthodeset procédures de mesure spécifiées dans le supplément C du bulletin 65 de l’OET (Officed’ingénierie et de technologie) et la règle RSS 102 d’Industrie Canada. Cet appareil a été testéselon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révéléconforme à ces dernières lorsqu’il a été testé en contact direct avec le corps.
Export restrictionsThis product or software contains encryption code which may not be exported or transferredfrom the US or Canada without an approved US Department of Commerce export license.This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interferencethat may cause undesirable operation. Modifications not expressly authorized by FujitsuAmerica, Inc. may invalidate the user’s right to operate this equipment.
Restrictions concernant l’exportationCe produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré duCanada ou des États-Unis sans un permis d’exportation du département du commerce desÉtats-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à lanorme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit acceptertoutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnementde l’appareil. Toute modification n’ayant pas été expressément approuvée par la société FujitsuAmerica Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.
Canadian NoticeThe device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potentialfor harmful interference to co-channel mobile satellite systems.
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.
In addition, users are cautioned to take note that high power radars are allocated as primaryusers (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and theseradars could cause interference and/or damage to LE-LAN devices.
Fujitsu 92
Manufacturer’s notes
Avis pour le CanadaLe matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utiliséuniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé auxsystèmes mobiles par satellite fonctionnant sur un même canal.
Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250 - 5 350MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite p.i.r.e. maximalepermise selon l’annexe A9.2 afférent aux périphériques RSS210.
En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissancesont considérés comme des utilisateurs principaux (ce qui signifie qu’ils sont prioritaires) desbandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférenceset/ou des dommages aux appareils de réseau exempts de licence.
93 Fujitsu
Index
IndexAAcoustic error messages 87Alt + Tab 34Anti-theft protection 56Audio ports 67
BBack tab 34Backspace 30Battery
battery life 39caring for and maintaining 39charge level 39, 42charging 39self-discharge 39storage 39
Battery indicator 26Battery status indicator
see Battery indicator 26Battery status meter 39Battery symbol
see Battery indicator 26BIOS Setup Utility
calling 79exiting 81operating 80protecting with password 57settings 79
BluetoothSwitching the module off 49Switching the module on 49
Bluetooth, safety notes 19Board 68Buttons 29
CCaps Lock 30
indicator 27CE marking 93Certification markings 94Charging capacity, battery 39Cleaning 21Components
installing / removing 68Configuration, BIOS Setup Utility 79Connecting audio devices 67Connecting headphones 67Ctrl+Alt+Del 34Cursor control 30Cursor keys 30
DDate is incorrect 83Declaration of conformity 92Device
setting up 23Disable
microphone 33Drive
indicator 26
EElectromagnetic compatibility 93Enable
microphone 33Energy
energy saving 19Energy saving 19Energy saving functions 33Energy saving mode
leaving 86Enter 30Enter key 30Error message:
on the screen 88Error messages on the screen 88Errors
Acoustic warnings 87ESD 68Ethernet LAN 50
FF Lock
Indicator 26Fault
correction 82Fingerprint sensor 55
configure 55First-time setup 22Fn key 30Fn+F1 33Fn+F10 34Fn+F2 33Fn+F3 33Fn+F4 33Fn+F5 33Fn+F6 33Fn+F7 33Fn+F8 33Fn+F9 33
Fujitsu 94
Index
GGetting started 22
HHard disk:
restoring the contents 83Hardware configuration 79HDMI port 63
IImportant notes 18Incorrect date/time 83Indicator
Caps Lock 27drive 26F Lock 26Num Lock 26Scroll Lock 27
KKey combinations 32Keyboard 29
cleaning 21
LLCD screen
cleaning 21decrease brightness 33difficult to read 84notes 36reflected glare 84remains blank 84
LCD screen is too dark 84 Life, battery 39Line feed 30 Loudspeakers 44
switch off 33switch on 33
Low voltage directive 93
MMain memory
see Adding memory 69 AC adapter
connecting 23setting up 23
Mechanical backup 56 Memory card
handling 43inserting 43removing 43
Memory expansioninstalling 71removing 70
Memory moduleimportant notes 69installing 71removing 70
Microphone 44Mobile operation 19Monitor
connecting 62drifting display 85remains blank 84
Monitor portsee VGA connection socket 62
NNotebook
before you travel 20cannot be started 85cleaning 21stops working 86switching off 28transporting 19–20using 25
Notebook, operation 25Notes 18
boards 68 cleaning 21disposal / recycling 92 energy saving 19 LCD screen 36 Safety 18transport 19
Num Lockindicator 26, 31–32
Numeric keypad 29see Separate numeric keypad 32see Virtual numeric keypad 31
OOperating system
activating system protection 58cancel system protection 58protecting with password 58
Operating system, restoring 83
PPackaging 22Palm vein sensor 56
Configuring 56
95 Fujitsu
Index
Passwordchanging 58entering 57removing 58
Password protection 57Port Replicator
Connecting a notebook 52Ports 51
PortsPort Replicator 51
Powerpower consumption 42power-management features 42
Power-on indicator 26Preparing for operation 23Printer does not print 86
RRechargeable battery 39
see Battery 39Removing memory
see Adding memory 69Return 30
SSafety notes 18Screen
no screen display 85Screen brightness
decrease 33increase 33
Scroll Lockindicator 27
Security functions 55SystemLock 60
Security functions,SmartCard 60
Security Lock 56Selecting a location 23Self-discharge, battery 39Separate numeric keypad 32Servicing 68Setup
see BIOS Setup Utility 79Shift 30Shift + Tab 34Shift key 30Slot
Memory cards 43Standby indicator 26Status indicators 25Supervisor password
changing 58entering 57removing 58
Switching onthe notebook 28
Switching on for the first time 24 System configuration 79System expansion 69
see Adding memory 69System settings, BIOS Setup Utility 79
TTab key 30Technical data 90
AC adapter 91notebook 90
The wireless connection to a networkdoes not work 86
Time not correct 83Tips 82Toggle output screen 34Touchpad 33, 35
buttons 35cleaning 21dragging items 36executing commands 35moving the pointer 35selecting an item 35switch off 33
Touchpad buttons 33TPM 59Transport
Transport damage 22Transportation 19–20Travel, notebook 20Troubleshooting 82Trusted Platform Module 59
UUSB charging function 66USB port with charging function (USB
Type-C™) 65USB ports 64User password
changing 58entering 57removing 58
Using the Kensington Lock Cable 56
VVGA connection socket 62Virtual numeric keypad 31
Fujitsu 96