FTTH Accessories - Fiberpowertech
Transcript of FTTH Accessories - Fiberpowertech
f i b e r o p t i c s o l u t i o n sFiberpowertech Plutovej 78722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
WWW.FIBERPOWERTECH.DK
Product CatalogFTTH Accessories
TECHNICALDATA SHEETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
2
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
3
Table of content
Connectors for microducts 6 - 15
Accessories for micro/tele ducts 21 - 24
Manhole and accessories 25 - 29
Introduction 4 - 5
Duct Tools 30 - 37
Fiber Tools 38 - 40
Indoor Cabinets 41 - 45
Indoor Splice Boxes 46 - 52
Street Cabinets 53 - 58
Blowing Machines 86 - 91
Splice Boxes 59 - 73
Lubricants 92 - 93
Rack Systems 74 - 81
Adjustable Drumrack 82 - 85
Connectors for teleducts 16 - 20
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
4
When working with products from GM Plast, you need the right kind of accessories.
Fiberpowertech provides a wide range of Connectors for assembling and terminating ducts and pipes, when working with products such as GM Flatliner, GM Multiduct and GM MultiSub.
All Fiberpowertech connectors are thoroughly tested and have been approved for use with products from GM Plast.
Fiberpowertech supplies a wide range of accessories for working with GM Cable Ducts.
Branching off, connecting and port reducing can all be done with the available accessories from Fiberpowertech.
Made from sturdy and high quality long-lasting materials, all accessories are reliable and proven products that are specifically made for use with GM Cable Ducts. Years of experience have told us exactly what works in the field when working with ducts and pipes every day.
Manholes are a key component in any FTTx network. They allow you to easily and quickly access your network in the ground.
Fiberpowertech Manholes are made from a tough and very durable polycarbonate material, ideal for putting into the ground. All manholes are highly customizable and can be fitted with exactly the configuration you need for your network.
Available in a wide range of sizes and models.
When building and maintaining your FTTx network, you need the right tools for the job.
Working in the field will stress and corrode your tools. By using only the most durable of materials and keeping the tools simple and easy to use, Fiberpowertech can supply you with a selection of the best tools for the job. We have spent years figuring out exactly what tools will get the job done, while also keeping expenses at a minimum.
Fiberpowertech supplies all the tools you need, for handling FTTx networks.
Introduction
Fiberpowertech provides a broad range of accessories for fiber network installation and maintenance. Ranging from machines for installation of fiber cable to duct scissors and connectors. In this catalogue you’ll find a wide variety of connectors, connector boxes, manhole acc. and tools.
CONNECTORS
TOOLS• PUSH-FIT DESIGN• ANIT-SHOCK COVER
ADDITIONAL FEATURES:
• STRAIGHT CONNECTORS• Y-CONNECTORS• T-CONNECTORS• H-CONNECTORS
CONNECTOR BOXES:
MANHOLES
CONNECTOR BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
5
No two FTTx networks are completely alike. Therefore you need the option to customize your network and your manholes, street cabinets and other components to exactly fit your specific network.
Fiberpowertech supplies a wide range of accessories for use with our products.
We frequently expand and widen our selection of available accessories.
Fiberpowertech has been dealing with FTTx accessories for the past years, primarily for the FTTH market. We have been around the block (and underneath) many times.
We have been pushing, dragging, blowing, floating, connecting and branching off in every way imaginable since the 1990’s. Fiberpowertech did a lot of pioneering and a lot of teaching, on how to install cable with air and water and using the correct accessories for the job through which we’ve gained vast experience in the field.
We produced the first micro blowing machine in 2000 and our first MultiSub Duct blowing machine in 2003.
To get the best results, Fiberpowertech worked with several of the leading cable producers, to change the outer sheet and memory effects of the standard duct cable (1996-1998).
Since 2001, Fiberpowertech has been constantly developing and improving micro cables. In this catalogue we are summing up many years of our experiences. With us as a partners in your project you are sure to work with the best.
OUR EXPERIENCE
ACCESSORIES
Ask us for an suggestions to get the job done, and if you like our ideas we would be glad to offer you the right material for the job that you want to have done.
( Splice Box FPT DW-2 )
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
6
CONNECTORS FOR MICRODUCTS
FPT Connector (direct burried)
Size Art.Nr.
7 mm 28-FPTC007
8 mm 28-FPTC008
10 mm 28-FPTC010
12 mm 28-FPTC012
14 mm 28-FPTC014
16 mm 28-FPTC016
20 mm 28-FPTC020
MOQ
80
70
40
30
20
15
10
FPT End Connector (direct burried)
Size Art.Nr.
7 mm 28-FPTE007
8 mm 28-FPTE008
10 mm 28-FPTE010
12 mm 28-FPTE012
14 mm 28-FPTE014
16 mm 28-FPTE016
20 mm 28-FPTE020
MOQ
160
140
80
60
50
30
20
PUSH -FIT design for quick and easy installation and disassembly.
FPT connectors are resistant to pressures used for blowing cables through microducts and provide protection from dirt and water.
In case of remounting : If the connector has been subjected to pressure, we recommend to replace the grippers.
Performance :
• Temperature
Minimum working temperature : -15 oC
Maximum working temperature : +45 oC
• Pressure
Continuous working pressure : 16 bar
Peak working pressure : 20 bar
Burst pressure : >25 bar
• All connectors withstand 1,35 bar external water pressure
• Grip rings designed for PE >0,965 Density
• FPT connectors resist pull out forces between connector
and the microduct :
Continuous pull-out (1h, 23oC) 7 mm - > 300 N
8 mm - > 350 N
10 mm - > 450 N
12 mm - > 500 N
14 mm - > 900 N
16 mm - > 950 N
20 mm - > 1000 N
• Non-metallic
• Non-corrosive
• Fits all DIN-normed duct sizes
CONNECTORS FOR MICRODUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
7
CONNECTORS FOR MICRODUCTS
FPT Connector FR (direct burried)
Size Art.Nr.
7 mm 28-FPTC007FR
8 mm 28-FPTC008FR
10 mm 28-FPTC010FR
12 mm 28-FPTC012FR
14 mm 28-FPTC014FR
16 mm 28-FPTC016FR
20 mm 28-FPTC020FR
MOQ
80
70
40
30
20
15
10
FPT End Connector FR (direct burried)
Size Art.Nr.
7 mm 28-FPTE007FR
8 mm 28-FPTE008FR
10 mm 28-FPTE010FR
12 mm 28-FPTE012FR
14 mm 28-FPTE014FR
16 mm 28-FPTE016FR
20 mm 28-FPTE020FR
MOQ
160
140
80
60
50
30
20
Direct Buried FR connectors are used for the connection of microducts for fiber optic cable in the telecommunication industry in places where Fire-Retardant performance is required.
In case of remounting : If the connector has been subjected to pressure, we recommend to replace the grippers.
Performance :
• Temperature
Minimum working temperature : -15 oC
Maximum working temperature : +45 oC
• Pressure
Continuous working pressure : 16 bar
Peak working pressure : 20 bar
Burst pressure : >25 bar
• All connectors withstand 1,35 bar external water pressure
• The connectors are rated V1 according to UL94
Standard ( tested when assembled to V1 rated duct)
• FPT connectors resist pull out forces between connector
and the microduct :
Continuous pull-out (1h, 23oC) 7 mm - > 300 N
8 mm - > 350 N
10 mm - > 450 N
12 mm - > 500 N
14 mm - > 900 N
16 mm - > 950 N
20 mm - > 1000 N
• Non-metallic
• Non-corrosive
• Fits all DIN-normed duct sizes
• FR version
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
8
CONNECTORS FOR MICRODUCTS
Straight Connector
Size(mm.) Art.Nr.
3 28-PFTC003
4 28-PFTC004
5 28-PFTC005
6 28-PFTC006
7 28-PFTC007
8 28-PFTC008
10 28-PFTC010
12
16
20
28-PFTC012
28-PFTC016
28-PFTC020
80
50
14 28-PFTC014
MOQ
500
350
350
300
200
200
140
100
80
End Connector
Size(mm.) Art.Nr.
3 28-PFTE003
4 28-PFTE004
5 28-PFTE005
6 28-PFTE006
7 28-PFTE007
8 28-PFTE008
10
14
28-PFTE010
28-PFTE014
12
16
20
28-PFTE012
28-PFTE016
28-PFTE020
MOQ
600
600
600
500
400
400
300
200
180
120
100
Materials :
• Body - PC, impact resistant• Collet - POM, stainless steel teeth• O-Rings - Nitrile rubber
Performance :
• Temperature
Minimum working temperature : -20 oC
Maximum working temperature : +60 oC
• Pressure
Short time working pressure : 16 bar
• Insertion force 50N max. (5 kg)
Reducing Connector
Size(mm.) Art.Nr.
5/3
6/5
28-PR005/003
28-PR006/005
8/3
7/4
28-PR008/003
28-PR007/004
8/5
7/5
8/7
28-PR008/005
28-PR007/005
28-PR008/007
10/7 28-PR010/007
10/8 28-PR010/008
12/7
12/8
28-PR012/007
28-PR012/007
12/10 28-PR012/010
14/12
14/10
28-PR014/012
28-PR014/010
16/10 16/12
16/14
28-PR016/010
28-PR016/012
28-PR016/014
MOQ
500
260
260
260
260
260
260
140
140
120
120
120
80
80
60
60
60
15
15
15
20/12
20/14
20/16
28-PR020/012
28-PR020/014
28-PR020/016
CONNECTORS FOR MICRODUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
9
Materials :
• Body - Polycarbonate, impact resistance, FR resistance V0• Collet - Polycarbonate, impact resistance, FR resistance V0• O-Rings - Nitrile Rubber (NBR)• Grip rings - Stainless-Steel 304
Performance :
• Temperature
Minimum working temperature : -10 oC
Maximum working temperature : +60 oC
• Pressure
Short time working pressure : 16 bar
• Insertion force 50N max. (5 kg)
CONNECTORS FOR MICRODUCTS
Straight Connector FR
Size(mm.) Art.Nr.
5 x 5/3.5mm
6 x 6/3.5mm
7 x 7/3.5 or 5.5mm
8 x 8/3/5 or 6 mm
8.5X 8.5/6mm
10 X 10/8mm
12 X 12/8mm
12 X 12/10mm
14 X 14/10mm
12.7 X 12.7/8mm
12.7 X 12.7/10mm
28-PFTC005FR
28-PFTC006FR
28-PFTC007FR
28-PFTC008FR
28-PFTC085FR
28-PFTC010FR
28-PFTC012FR
28-PFTC0121FR
28-PFTC0127FR
28-PFTC01271FR
28-PFTC014FR
80
80
MOQ
500
350
350
300
200
200
140
100
80
End Connector FR
Size(mm.) Art.Nr.
5 28-PFTE005FR
6 28-PFTE006FR
7 28-PFTE007FR
8 28-PFTE008FR
8.5 28-PFTE0085FR
10 28-PFTE010FR
12
14
28-PFTE012FR
28-PFTE014FR
12.7 28-PFTE0127FR
MOQ
600
600
600
500
400
400
300
200
180
Reducing Connector FR
Size(mm.) Art.Nr.
5/3
7/5
28-PR005/003FR
28-PR007/005FR
10/8
8/5
28-PR010/008FR
28-PR008/005FR
12/8
10/7
12/10
28-PR012/008FR
28-PR010/007FR
28-PR012/010FR
14/10 28-PR014/010FR
14/12 28-PR014/012FR
MOQ
500
260
260
260
260
260
260
140
140
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
10
Locking Clips
Size(mm.) Art.Nr.
5 28-TL005
6 28-TL006
7/8 28-TL007/8
10 28-TL010
12 28-TL012
14 28-TL014
16
20
28-TL016
28-JL020
Straight Connector
Size(mm.) Art.Nr.
18 28-J018/PM
20 28-J020/PM
MOQ
25
25
MOQ
100
100
100
100
100
100
100
100
How To - Mounting Connector
CONNECTORS FOR MICRODUCTS CONNECTORS FOR MICRODUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
11
How To - Mounting Connector
CONNECTORS FOR MICRODUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
12
Easy installation / Retrofitting
Divisable duct repair kit is suitable for connecting and repairing subducts which contain a cable. Our divisible sealing system enables you to install it easily onto to existing installations.
Materials :
• Material shells - glassfibre reinforced• Material insert - Silicone
Performance :
• Gas and watertight up to 5,0 bar
Microduct SealAir & Waterproof, up to 0.5 Bar
Size(mm.) Art.Nr.
5 / 1,0
5 / 2,1
28-F005/1,0
28-F005/2,1
5 / 1,25
7 / 1,0
7 / 1,8
5 / 1,8
7 / 1,25
7 / 2,5
28-F005/1,25
28-F007/1,0
28-F007/1,8
28-F005/1,8
28-F007/1,25
28-F007/2,5
MOQ
100
100
100
100
100
100
100
100
Easy installation / Retrofitting
Foe easy gas- and watertight sealing of cables in miniducts.
Materials :
• Plastic housing - PC• Sealing plug - TPE
Performance :
• Sealing : up to 0,5 bar
• Pull-out force duct seal vs duct : > 20N
CONNECTORS FOR MICRODUCTS
Divisible duct repair kit
Size(mm.) Art.Nr.
5
8
12
16
33-F005
33-F008
33-F012
33-F016
7
10
14
20
33-F007
33-F010
33-F014
33-F020
MOQ
10
10
10
10
10
10
10
10
CONNECTORS FOR MICRODUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
13
CONNECTORS FOR MICRODUCTS
Split End ConnectorAir & Waterproof, up to 0.50 Bar
MOQ
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
UD*
UD*
10
Size (mm.)
10 / 2,5-3,5
10 / 3,5-5,0
10 / 5,0-6,5
10 / 6,5-8,0
12 / 2,5-3,5
12 / 3,5-5,0
12 / 5,0-6,5
12 / 6,5-8,0
12 / 7,0-8,5
14 / 5,8-8,0
14 / 8,0-10,0
16 / 5,8-8,0
16 / 8,0-10,0
18 / 9,4-12,0
20 / 5,5-8,0
20 / 9,4-12,0
20 / 7,0-9,5
20 / 5,5-7,2
20 / 5,5-8,0
Art.Nr.
28-F010/2,5-3,5
28-F010/3,5-5,0
28-F010/5,0-6,5
28-F010/6,5-8,0
28-F012/2,5-3,5
28-F012/3,5-5,0
28-F012/5,0-6,5
28-F012/6,5-8,0
28-F012/7,0-8,5
28-F014/5,8-8,0
28-F014/8,0-10,0
28-F016/5,8-8,0
28-F016/8,0-10,0
28-F018/8,0-10,0
28-F020/5,5-8,0
28-F020/9,4-12,0
28-F020/7,0-9,5
28-F020/5,5-7,2
28-F020/5,5-8,0
Other sizes and configurations available upon request*Under development
Performance :
• Sealing : up to 0,5 bar
• Pull-out force duct seal vs duct 10mm : ≥ 100N
• Pull-out force duct seal vs duct 12mm : ≥ 120N
• Pull-out force duct seal vs duct 14mm : ≥ 140N
• Pull-out force duct seal vs duct 16mm : ≥ 160N
• Pull-out force duct seal vs duct 18mm : ≥ 180N
• Pull-out force duct seal vs duct 20mm : ≥ 200N
• Mechanical compression strength : ≥ 1000N, 10 sec.
Easy installation / Retrofitting
Divisable seals for microducts provide a gas and watertight seal for open duct ends installed with air blown fiber or micro cables.
Materials :
• Plastic scales - glassfibre reinforced• Closing key - glassfibre reinforced• Sealing plug - EPDM
Performance :
• Sealing : up to 0,25 bar
• Pull-out force duct seal vs duct 32mm , 40mm : ≥ 1000N
• Pull-out force duct seal vs duct 50mm , 63mm : ≥ 1200N
Size (mm.) Art.Nr. MOQ
32/3x10 28-F032/3x10 10
40/10x7 28-F040/10x7 10
40/4x12 28-F040/4x12 10
40/5x10 28-F040/5x10 10
40/3x14 28-F040/3x14 10
50/7x10 28-F050/7x10 10
50/7x12 28-F050/7x12 10
50/10x7+1x12 28-F050/10x7+1x12 10
50/18x7 28-F050/18x7 10
63/24x7+1x14 28-F063/24x7+1x14 10
Split End Connector HDPEAir & Waterproof, up to 0.25 Bar
Other sizes and configurations available upon request
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
14
Cable End Connector
Size(mm.) Art.Nr.
5 28-EE05/0,5-3,5
6 28-EE06/2,0-5,0
7 28-EE07/2,0-5,0
8 28-EE08/2,0-6,0
10 28-EE10/1,0-4,0
10 28-EE10/4,0-8,0
12 28-EE12/3,0-6,0
12 28-EE12/5,0-8,0
12
14
14
14
16
16
16
20
20
20
14
28-EE12/7,0-10,0
28-EE14/3,0-6,0
28-EE14/7,0-10,0
28-EE14/9,0-12,0
28-EE16/3,0-6,0
28-EE16/5,0-8,0
28-EE16/7,0-10,0
28-EE20/5,0-8,0
28-EE20/7,0-10,0
28-EE20/9,0-12,0
28-EE14/5,0-8,0
MOQ
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Materials :
• Body - Polycarbonate
• Guide tube retainer, release sleeve and Cap - POM
• Oring seal - Nitrile
• Water block Seal - Silicone
Performance :
• Air & Water tight - 0,5Bar
CONNECTORS FOR MICRODUCTS
12/3-6
Double Sealed Connector (Outdoor)
Size(mm.) Art.Nr.
28-e012/3/6/GBWB
MOQ
25
CONNECTORS FOR MICRODUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
15
Endcap
Size (mm.) Art.Nr. MOQ
5 34-DN005 100
7 34-DN007 100
8 34-DN008 100
10 34-DN010 100
12 34-DN012 100
14 34-DN014 100
16 34-DN016 100
18 34-DN018 100
20 34-DN020 100
25 34-DN025 100
32 34-DN032 100
40 34-DN040 100
50 34-DN050 100
63 34-DN063 100
Materials :
• Material: polyethylene (PE-LD)• Material from GPN 250 / 219 upwards: polyethylene (PE-LLD) Colour: yellow
For protection of DIN EN 10220, DIN EN 10255 and DIN EN ISO 1127 pipes during transport and storage. Discontinuous internal beads, offset by 180 degrees, permit venting and pressure equalization.
CONNECTORS FOR MICRODUCTS
Seal Connector
Size(mm.) Art.Nr.
12 /3-6 28-e012/GBWB 3-6
12 /5-8 28-e012/GBWB 5-8
14 /3-6 28-e014/GBWB 3-6
14 /5-8 28-e014/GBWB 8-6
MOQ
25
25
25
25
Materials :
• Body - Polycarbonate
• Guide tube retainer, release sleeve and Cap - POM
• Oring seal - Nitrile
• Gas block Seal - Silicone
Performance :
• Peak tensile force - 200N.
• Air & Water tight - 0,5Bar
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
16
Features :
• Optimal acceptance of the PE-pipe in the fitting. The
vortex clamping ring and a robust O-ring ensure the
tensional safety and tightness.
• No supporting sleeves required for water and
compressed air.
• No inadmissible tensioning and weakening of the
PE-pipe.
• Continually adequate sealing and shearing-protection
forces, which are regulated automatically by the
internal pressure of the medium.
• Thanks to the selection of the material cast or POM,
no electrochemical corrosion on the tapping clamps
and house-connection sliders.
CONNECTORS FOR TELEDUCTS
Plowing Connector
Size(mm.) Art.Nr.
32 33-DN032
40 33-DN040
50 33-DN050
MOQ
48
48
40
Spade for Plowing Connector, 2pc set
Size(mm.) Art.Nr.
32 79-041.071
40 79-041.072
50 79-041.073
MOQ
1
1
1
Straight Connector (Brass)
Size(mm.) Art.Nr.
16 35-16x16M
20 35-20x20M
25 35-25x25M
32 35-32x32M
40 35-40x40M
50 35-50x50M
MOQ
75
90
60
36
36
18
Materials :
• Fittings - Acetal resin
Performance :
• Pressure level PN 16
CONNECTORS FOR TELEDUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
17
CONNECTORS FOR TELEDUCTS
Features :
• Straight couplers are a transparent coupler for
connecting PE cable ducts.
• Water tight and air tight
• UV stabilised.
• Resistant to corrosion and most chemicals. • In case of remounting : If the connector has been
subjected to pressure, we recommend to replace the grippers.
Materials :
• Body: Polypropylene - Transparent• Nut: Polypropylene – Metric: Orange Inch: Blue• Grip Ring: Acetal – White• Insert: Polypropylene – Inch: Transparent
• Seal: Nitrile Rubber - Black
Performance :
• Pressure: ≤ 16bar (230psi)
• Working temperature: < 60ºC (140ºF)
CONNECTORS FOR TELEDUCTS
Straight Connector
Size(mm.) Art.Nr.
16 35-16x16t
20 35-20x20t
25 35-25x25t
32 35-32x32t
40
63
35-40x40t
35-63x63t
50
75
35-50x50t
35-75x75t
MOQ
75
90
60
36
36
18
1
1
Comfit Connector
Size(mm.) Art.Nr.
32 31-40032M0032
40 31-40040M0040
50 31-40050M0050
MOQ
70
60
33
Straight Connector
Size(mm.) Art.Nr.
16 35-16x16tt
20 35-20x20tt
25 35-25x25tt
32 35-32x32tt
40
63
35-40x40tt
35-63x63tt
50 35-50x50tt
MOQ
50
50
40
25
13
15
17
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
18
CONNECTORS FOR TELEDUCTS
Features :
• For use with HDPE pipes that comply with ISO 4427,
EN 12201 and DIN 8074.
• Connects to metal and plastic accessories with ISO 7
threads.
• Made from top quality raw materials approved for
drinking water by WRc, DVGW and KIWA.
• Allows easy and quick mounting without loss of parts.
• Unbreakable, corrosion-resistant and resistant to most
chemicals.
• Stands up to tough working conditions, pipe bending
and pulling.
• Complies with International Standards.• In case of remounting : If the connector has been
subjected to pressure, we recommend to replace the grippers.
Materials :
• Grip Ring- Acetal
• Nut - PPB UV stabilized with carbon black
• D-Ring - Nitril -Butyl Rubber
• Body - PPB UV stabilized with carbon black
Performance :
• Maximum Working Temperature :
Polypropylene 100°C
Acetal 80°C
• Working Conditions for 50 Year Lifetime :
Working Temperature Working Pressure
up to 23°C 16 bar
40°C 7 bar
70°C 4 bar
Reducing Connector
Size(mm.) Art.Nr.
20-16 35-20x16
25-20 35-25x20
32-20 35-32x20
32-25 35-32x25
40-25 35-40x25
40-32 35-40x32
50-25 35-50x25
50-32 35-50x32
50-40 35-50x40
63-32 35-63x32
63-50 35-63x50
63-40 35-63x40
MOQ
50
35
54
48
30
22
18
25
24
15
15
12
Endstop
Size(mm.) Art.Nr.
16 35-16x16s
20 35-20x20s
25 35-25x25s
32 35-32x32s
40 35-40x40s
50 35-50x50s
MOQ
75
90
60
36
36
18
CONNECTORS FOR TELEDUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
19
CONNECTORS FOR TELEDUCTS CONNECTORS FOR TELEDUCTS
Features :
• 2 - way tube I / H closure in-line divisible
• The FPT in-line tube clousere is a completly divisible
direct burried clousure which can be used for:
• Transition of tube to tube (same diameter)
• Transition of tube to different diameter tube
• Transition of microtube to microtube (one-on-one
proportion)
• Transition of several microtubes to tube
• Transition of several minitubes to modular cable
The closure is excellently used for fibre network maintenance
and fibre or tube blowing features.
The strain relief inlay parts are exchangable, therefore it’s
possible to use one housing for several diameters and
applications. A range of 25, 32, 40, 50 mm are available for use
with the closure housing.
Tube connectors are easy to install due to the length of the
closure. The closure can be installed without any special tools
which makes it easier to handle.
Performance :
• Sealing level : up to IP54
• Crush resistance : up to 1000 N / 25 mm2
Connector Box
Size(mm.) Art.Nr.
2x40mm 28-FPB 2x40mm
MOQ
1
Connector Box
Size(mm.) Art.Nr.
4x40mm 28-FPB 4x40mm
MOQ
1
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
20
CONNECTORS FOR TELEDUCTS
Connector
Size(mm.) Art.Nr.
32/32/32 T 28-ET32/32/32
28-ET40/40/40
28-ET50/50/50
MOQ
1
1
1
40/40/40 T
50/50/50 T
Features :
• T/Y/H/I closure to interconnect and branch micro-
tubes in duct routes.
• It provides high network flexibility, upgradeability and
uninterrupted fibre/cable connectivity with no need
for splicing.
• Two half shells, fully splittable solution.
Materials :
• Rings - ABS/POM
• Body - HDPE/High Impact Polypropylene
Performance :
• Sealing level : only mechanical protection
• Use : Direct burial or manholes
Reopenable, Splittable
Tool free assembly
Connector
Size(mm.) Art.Nr.
25/25/25 Y 28-EY25/25/25
32/32/32 Y 28-EY32/32/32
40/40/40 Y 28-EY40/40/40
50/50/50 Y 28-EY50/50/50
MOQ
1
1
1
1
Connector Box
Size(mm.) Art.Nr.
4 x 50 28-e50/50/50/50
MOQ
1
Connector Box
Size(mm.) Art.Nr.
2 x 50 28-e50/50 CB L
MOQ
1
ACCESSORIES FOR MICRO/TELE DUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
21
CONNECTORS FOR TELEDUCTS
Branch Off 2 x 12 mm.
Size(mm.) Art.Nr.
2 x 12 28-EH50/50
MOQ
1
Branch Off 40 mm.
Size(mm.) Art.Nr.
40 28-EH40/40
MOQ
1
Features :
• Branch-off connectors for outside applications• Designed as manipulation point for branching at any
place in network.
Port Maxifold
Size/Cable Art.Nr.
50/ 7x12 28-E50/7x12
MOQ
1
Port Minifold
Size/Cable Art.Nr.
50/ 5x10 50-33E5x10
MOQ
1
ACCESSORIES FOR MICRO/TELE DUCTS
Port Reducer
Size(mm.) Art.Nr.
50/ 2x20 28-ER50/20/20
MOQ
1
Port Reducer
Size(mm.) Art.Nr.
50-20 28-EPR 50/20
50-32 28-EPR 50/32
50-40 28-EPR 50/40
40-32 28-EPR 40/32
MOQ
1
1
1
1
Materials :
• Body - PE• Colour - Black
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
22
ACCESSORIES FOR MICRO/TELE DUCTS
Repairing Connector
Size(mm.) Art.Nr.
32 33-EBM032
40 33-EBM040
50 33-EBM050
MOQ
12
12
12
Coupler for PE ducts.
The connector is used for the gas- and water-tight connection of split ducts and ducts. The connectors are resistant to tensile. Fittings are out of PVC-U and are divisible.
Materials :
• PVC-U
Performance :
• 0.5 bar permanent (10 bar/30 min.)
Coupler for connecting PE cable ducts.
• The split ducts were developed for the pressure-tight repair of empty ducts or ducts occupied with cables or pipes.
• They are suitable for the gas- and water-tight sealing of blow-in points
• They consist of two half shells manufactured out of high-quality PVC-U.
• The easy installation facilitates the branching off from pipeline routes.
Materials :
• Body - PVC
Performance :
• Gas- and water-tight up to 0,5 bar.
Repairing Ducts, 2 mtr. splittable
Size(mm.) Art.Nr.
32 33-EBMR32
40 33-EBMR40
50 33-EBMR50
MOQ
1
1
1
Tool for repairing Ducts
Size(mm.) Art.Nr.
32 33-EBMV32
40 33-EBMV40
50 33-EBMV50
MOQ
1
1
1
ACCESSORIES FOR MICRO/TELE DUCTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
23
ACCESSORIES FOR MICRO/TELE DUCTS
Fiberflex
Size Art.Nr. MOQ
1
1
1
30 Meter 28-EKR72358
50 Meter 28-EKR72359
25 Meter 28-LEKR54552
Trace Ball
Art.Nr.
37-D/OM0019A
MOQ
1
Trace Ball :
• The Electronic Marker System quickly pinpoints the location of burried facilities including buried splices, fiber optic facilities, service drops and manholes.
• Markers operate even in the presence of metal conduit or pipe, metallic conductors, fences.
Pull Eye (1)
Size(mm.) Art.Nr.
32 50-10PE118U
40 50-12PE142U
50
63
50-12PE173U
50-20PE228U
MOQ
1
1
1
1
Pull Eye(2)
Size(mm.) Art.Nr.
32 50-11PE118U
40 50-11PE142U
50
63
50-11PE173U
50-11PE228U
MOQ
1
1
1
1
Expandable Plug
Size Art.Nr. MOQ
1
1
1
1
40 50-12PE142U
50
63
50-12PE173U
50-20PE228U
32 50-10PE118U
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
24
ACCESSORIES FOR MICRO/TELE DUCTS
Features :
• This fiberglass tape is used to protect cables and/or microducts, in all situations where they may be exposed to attacks by rodents, for example inside handholes, manholes, tunnels, and other empty spaces. The tape can be applied to both new and already existing infrastructures.• The tape is made with a 1.5 mm thickness fiberglass weave, natural color, and has one pre-glued side to facilitate installation on cables and/or ducts.
Features :
• The micro-cable storage bag is used inside manholes to protect the micro-cable overlength and to keep it secure and organized.• It is made of a fiberglass fabric to prevent rodent attacks.
The bag has a high-resistance Velcro opening at the top with two flaps at the opposite sides to wrap the ducts and protect the entrance to the bag. A steel band inserted at the top back allows easy mounting of the bag on a multi-point bracket fixed to the wall. At the front, the bag has a transparent envelop to host the identification label of the cable / customer.
Rodent protection Tape
Width/Length Art.Nr.
50mm/30m
100mm/30m
150mm/30m
200mm/30m
27-001.66.2
27-001.66.4
27-001.66.3
27-001.66.5
Pipes Ø max
12mm
20mm
40mm
50mm
Micro cable storage bag
Size (mm)
420x 420x15 27-001.67
500x 500x15
610x 630x15
27-001.66
27-001.67.2
Art.Nr.
MANHOLE AND ACCESSORIES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
25
MANHOLE AND ACCESSORIES
Manhole (PC)
Size(mm.) Art.Nr.
250 x 250 37-EK 268
400 x 400 37-EK 358
400 x 650 37-EK 368
400 x 800 37-EK 378
400 x 1165 37-EK 478
400 x 1600 37-EK 628
550 x 550 37-EK 288
550 x 1165 37-EK 338
650 x 650
800 x 800
800 x 1400
800 x 1600
800 x 1825
800 x 2000
800 x 2200
800 x 1165
37-EK 388
37-EK 328
37-EK 428
37-EK 708
37-EK 728
37-EK 738
37-EK 748
37-EK 508
MOQ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Manhole Frame (70mm , 220mm)
Size(mm.) Art.Nr.
250 x 250 37-EKR 268
400 x 400 37-EKR 358
400 x 650 37-EKR 368
400 x 800 37-EKR 378
400 x 1165 37-EKR 478
400 x 1600 37-EKR 628
550 x 550 37-EKR 288
550 x 1165 37-EKR 338
650 x 650
800 x 800
800 x 1400
800 x 1600
800 x 1825
800 x 2000
800 x 2200
800 x 1165
37-EKR 388
37-EKR 328
37-EKR 428
37-EKR 708
37-EKR 728
37-EKR 738
37-EKR 748
37-EKR 508
MOQ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Features :
• Polycarbonate manholes are suitable as cable drawing manholes, telecommunication distribution systems and underground distribution systems. They are a durable and flexible alternative to concrete manholes.
Materials :
• Polycarbonate
Manhole Frame with Cassette (ALU)
Size(mm.) Art.Nr.
250 X 250 37-EK268BK
400 X 650 37-EK368BK
400 X 800 37-EK378BK
400 X 1165 37-EK478BK
550 X 550 37-EK288BK
550 X 1165 37-EK338BK
800 X 800 37-EK328BK
800 X 1600 37-EK708BK
MOQ
1
1
1
1
1
1
1
1
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
26
Manhole Basebox (PET)
Size(mm.) Art.Nr.
250 x 250 37-EK 268
400 x 400 37-EK 358
400 x 650 37-EK 368
400 x 800 37-EK 378
400 x 1165 37-EK 478
MOQ
1
1
1
1
1
MANHOLE AND ACCESSORIES
Product advantages :
• Modular design• Frame elements that can be built over on the face side possible at any level• ø 110 mm standard break points• Covers made of glass fibre reinforced resin up to 125kN• Grooved base plate for better anti-slip characteristics• Logo option possible
Technical Data :
• Body - Foam-moulded PET• Frame material - Hot-dip galvanised steel• Locking cross-bar material - Hot-dip galvanised steel• Cover - Glass-reinforced resin• Weight per cover - Between 7 and 25 kg• Max. load - 125 kN• Can be built over - Yes, on the face side• Locking mechanisms - Hexagon socket head, COLT/Telenet
The BaseBox is sustainable PET manhole designed as a basic product for use in a wide range of an applications. And it‘s all possible due to a production process using PET foams to make injection-moulded parts. This enables us to supply a manhole made from recycled disposable PET bottles.
Example: 400x800 with 4 framesand a GRP cover with locking
MANHOLE AND ACCESSORIES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
27
MANHOLE AND ACCESSORIES MANHOLE AND ACCESSORIES
Ø110mm Manhole Seal For Flatliner/Multiduct
Size(mm.) Art.Nr.
110 37-200.112
MOQ
1
Product advantages :
• The protective duct sealings are used at road crossings and for unoccupied cable ducts
against the penetration of sand• Due to the pre-cut sealing frame, ducts occupied with
cables can be protected against alluvial sand• The high-quality fittings are suitable for cable duct
sockets and insertion ends• They can easily and quickly be installed and
substitute insecure temporary solutions
Materials :
• Body - PE• Colour - Black
Product advantages :
• Protection for your cables, pipes and manholes• The conduit seal prevents silting or sanding up of the
cable installation pipes or manholes• The special insert of egg crate foam seals off the
cables• The conduit seal can be opened so that it can be fitted to cables or manholes that are allready installed
Materials :
• Body - PE• Colour - Black
Ø50-160mm Manhole Seal For Micropipes
Size(mm.) Art.Nr.
50 37-200.050
110 37-200.110
140
160
37-200.140
37-200.160
MOQ
1
1
1
1
Ø110mm Manhole Seal For Micropipes
Size(mm.) Art.Nr.
110 37-200.111
MOQ
1
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
28
MANHOLE AND ACCESSORIES
Reducer for a Manhole
Size(mm.) Art.Nr.
110/ 2x50 37-ST006302
MOQ
1
Product description :
• Pipe adapter, divisible• For opening Ø 110 mm• With 2 pipes inlets Ø 50 mm • For inserting cables or pipes
Materials :
• Body - PE• Colour - Black
Reducer for a Manhole
Size(mm.) Art.Nr.
110 / 1 x 50 37-ST006300
MOQ
1
Rubber Reducer
Size(mm.) Art.Nr.
50-32 37-100/024
50-40 37-100/025
MOQ
1
1
Covering
Size(mm.) Art.Nr.
50-110 37-200.026
MOQ
1
Product description :
• Stepped grommet• To allow connection of different pipe sizes• For opening Ø 110 mm• Allows connection of pipes with external diameter 90,
75, 63, 50 and 40 mm
Product description :
• Moulded transition piece (reducer)• Reducer for Ø 50 mm opening , divisible • Can also be used with existing cables or manholes
MANHOLE AND ACCESSORIES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
29
MANHOLE AND ACCESSORIES MANHOLE AND ACCESSORIES
Key
Art.Nr.
37-KEY
MOQ
1
Logo Plates
Size(mm.) Art.Nr.
40 x 80 37-311899
MOQ
50
Hook, 2pc set
Art.Nr.
37-100/040
MOQ
1
Product description :
• Lifting hook for cover• Set (2 ea.)
Product description :
• Tools for attaching manhole cover • Offset screwdriver for head form hex socket
Product description :
• Customer-specifi c company symbol • Covers can be equipped with a company-specifi c logo • Cast bronze: for cast and chequered stud plate covers • Aluminium: for concrete covers • Recessed in cover
Materials :
• Body - Bronze , Aluminium• Size - 80 x 40 mm
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
30
DUCT TOOLS
Tools Box Art.Nr.
79-100.002
79-100.001
Size
S
L
Included : Knife for Flatliner, Micro Cutter, In-side Beveler, 2-26mm Cutter, 32-50mm Cutter, Pipeplough
Cutter
Size(mm.) Art.Nr.
32 - 50 79-041.041
MOQ
1
Spare Blades
Size(mm.) Art.Nr.
32 - 50 79-041.041K
MOQ
1
Minimum effort during cutting :
• Precise right-angled cuts• Pin-point precision without deformation• Precise pressure transfer and guided cutter feed• Automatic, controlled opening of the blade at the
push of a button• Secure grip with the rubberised handles• Shear arms lockable in transport position
Materials :
• Body - Aluminium• Blade - Stainless Steel
Cutter Big
Size(mm.) Art.Nr.
50 - 75 79-041.047
MOQ
1
DUCT TOOLS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
31
DUCT TOOLS DUCT TOOLS
Cutter
Size(mm.) Art.Nr.
2 - 26 79-041.039
MOQ
1
Application advantages :
• Shear arms lockable in transport position • Secure grip with the rubberised handles • Precise right-angled cuts • Precise pressure transfer and guided cutter feed • Pin-point precision without deformation • Minimum effort during cutting • Automatic, controlled opening of the blade at the
push of a button
Materials :
• Body - Aluminium• Blade - Stainless Steel
Chain Cutter
Size(mm.) Art.Nr.
20 -110 79-7.0285
MOQ
1
Pipeplough
Size(mm.) Art.Nr.
20 - 110 79-041.050
MOQ
1
Pipeplough Spare Parts
Item Art.Nr.
Holder 79-041.052
Knife 79-041.051
MOQ
1
1
Key Features :
• For copper, brass, aluminium, thin-walled steel pipes, as well as plastic coated pipe
• Ideal for working in confined spaces, e.g. parallel-running pipes
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
32
DUCT TOOLS
Cable Stripping Knife with Safety Cap
Size(mm.) Art.Nr.
47mm 79-041.055
MOQ
1
Key Features :
• Special blade with guide blade prevents damage of conductor strands
• For removal of insulation and sheath• Blade and back sharpened• Blade of tempered stainless steel
Knife for Flatliner
Art.Nr.
79-041.053
MOQ
1
Key Features :
• Both the handle and holster are made from super-durable PP plastic
• The holster can be attached to both a belt and a button on your work clothes - If your belt is thick, cut away the small pin on the cover
• The blade is made from Japanese knife steel, 2.5 mm carbon steel that has been hardened to 58–60 HRC
Micro Cutter
Size(mm.) Art.Nr.
0 - 12 79-041.038
MOQ
1/10
Key Features :
• A hardened steel blade is mounted to a sturdy plastic spring-action frame
• Blade is easly replaced by removing two screws.• Just align your duct with the blade and the “V” anvil
and squeeze.
DUCT TOOLS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
33
DUCT TOOLS
Cutter :
• Rottary microduct cutter• Fast Cut: Quick cutting with just a few turns• Flexible casing, allows cutting on smaller diameters• Less space required, ideal for hard-to-reach places• No deformation of the pipe: self-clamping
Rottary Cutter
Size(mm.) Art.Nr.
3 - 14 79-041.038C
MOQ
1
Cutter
Size(mm.) Art.Nr.
32
40
50
79-041.0032
79-041.0040
79-041.0050
MOQ
1
1
1
Reifer
Size(mm.) Art.Nr.
32 79-0410.25
40 79-0410.30
50 79-0410.35
MOQ
1
1
1
Size(mm.) Art.Nr.
4 -36 79-041.019
MOQ
1
Inside/Outside Beveler
Inside Beveler w. Blade
Art.Nr.
79-041.037
MOQ
1
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
34
Compact Receiver is an easy-to-use wire, cable and duct sondes locator. CR can be used to trace and pinpoint duct sondes and underground cables from several metres depth. Indoors CR be used e.g. to locate floor heating cables and wires inside walls.
Technical Specification:
• Adjustments2 buttons for power on/off, 7-step gain adjustmentand change of receiving frequency
• ConnectorsMale connector for interchangeable probes
• Sondes - additional setup 4,6mm, 6,4mm, 7,5mm, 9,5mm,18,0mm• LED indicators
Green LED for power on and low battery indication,12 red LEDs for received signal strength display (24levels), for firmware version display, for battery statusdisplay and for active operating frequency display
• Sound indicatorsInternal speaker for tracing signal and for otheraudible indications
• Batteries3pcs. 1.5V IEC LR03 (AAA) alkaline batteries. Lowbattery warning at approx. 3.7V
• Enclosure material & sizeStainless steel and aluminium, 180 x Ø40 mm, weightapprox. 230g (batteries included, no probes)
• Protection classIEC 60529 IP44
• Environmental conditionsUsage -40...+60ºC (dry or moist conditions)
Storage -40....+60oC (dry conditions)
DUCT TOOLS
FPT-Compact Receiver
Sondes - additional setup
Sonde18 mm
Sonde9,0 mm
Sonde7,5 mm
Sonde6,4 mm
Sonde4,6 mm
Accessories
MountingAdapter
BatteryTester
SpareBattery
SpareBatteries kit
Compact Receiver
Size Art.Nr.
- 43-17.750.500-789
DUCT TOOLS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
35
DUCT TOOLS
galvanised steel
Standard colourways :
Multiduct Flatter TM R P
• The length of the jack 120mm for regulation• Ø200mm wheels• Black POM wheels with SKF bearings• Type-plate with serial number• GPS-Tracker• Bracket to hold the crossbar during transport
Multiduct Flatter is a patented, innovative solution for loosening the microducts tension in the bundle.
It allows to get rid of stress on the whole length of the drum before final installation.
If the multiduct is installed with twists and turns the blowing length can be reduced to 10-20% of straight installation.
The multiduct has to be installed in a straight line to guarantee the best blowing performance and installation length.
Dimensions Art.Nr. 42-805.111
External dimensions W x H x D 1380 x 780 x 192 mm
Cabinet material : Galvanised Steel
Features :
NEWin our offer
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
36
Depending on the drum size the twists and turs are making the job more difficult.
Even after unrolling multiducts the stress is still in the bundle. Problems of overlength and “corkscrew” or “snake” effect disturb the process.
Example of the multiduct withoutFlatter treatment on the left and afteron the right side.
1
1
3
3
2
2
DUCT TOOLS
Multiduct Flatter TM R P
• Twists and turns • “Corkscrew” or “Snake” effect• Overlength problem• Disturbance in the installation process• Poor blowing length and performance• Maintenance issues
Problems :
DUCT TOOLS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
37
1.Height and pressure regulation
120 mm
SKF bearings
2 pcs.
2. Black POM wheels
3. Bracket
6. GPS Tracker
5. Stabilisation support
4.Steel Frame
Quick installation saves time and money
Reduces duct’stension
Long life Compact size
DUCT TOOLS
Multiduct Flatter TM R P
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
38
Product description :
• Tube cutter• Bead crimper• Manifold tube measurement guide• Tube reforming nipple• Gas and water block activation tool• 30mm splice protector fibre guide
Product description :
• Cutting and stripping to the very highest tolerances• Stripping and removal of 2 - 3 mm outer jacket• Stripping 900μm buffer insulation• Stripping 250μm acrylate coating• Length:162mm• Weight: 119g
Product description :
• For circumferential and longitudinal stripping
• The stripper uses two ‘V’ groove steps 0-3.2mm and
3mm- 6.4mm)
• Stripping of most fibre optic cables up to a maximum
diameter of 6.4mm.
Product description :
• A simple and effective longitudinal sheath stripper tool for easy removal of the outer sheath of most fibres with a diameter of 1.5mm to 3.3mm
• 4 preset grooves, ( 1.5-1.9mm, 2.0-2.4mm, 2.5 -2.9mm and 3.0-3.3mm)
Blown Fibre Preperation Tool
Size(mm.) Art.Nr.
multi 79-00.5480
MOQ
1
Compact Fibre Optic Cable Stripper
Size(mm.) Art.Nr.
multi 79-00.6912
MOQ
1
Fibre Optic Cable Stripper
Size(mm.) Art.Nr.
multi 79-00.6170
MOQ
1
Slitter Mid Span Fibre Access Stripper
Size(mm.) Art.Nr.
multi 79-00.6625
MOQ
1
FIBER TOOLS FIBER TOOLS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
39
Product description :
• Scores buffer tube sizes from 1.3 mm to 6.0 mm, eliminating multiple tools
• Factory fixed hardened carbon steel blade requires no timely blade adjustment
• Body made of strong resilient acetal polymer
Overview :
• Across and Lengthwise Fiber Cable Stripper is used for stripping the sheath of optical cable• It is portable, compact, easy to operate, timesaving• Crosswise stripping function
Product description :
• Tool for deburring or reaming the internal surface of plastic blown fibre tubes from 2mm to 12mm• Comfort grip handle
Fibre Tube Scoring Tool
Art.Nr.
79-00.4743
MOQ
1
Cable Jacket Stripper
Art.Nr.
79-00.4799
MOQ
1
Reaming and Deburring Tool
Size(mm.) Art.Nr.
2 - 12 79-00.6467
MOQ
1
FIBER TOOLS
Tools organizer
Art.Nr.
79-00.4800
MOQ
1
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
40
Product description :
• PTFE coated blade for precision cutting of microducts up to a diameter of 14mm
• Incorporating a one-handed locking system• Length - 133mm
Product description :
• Designed to cut through Kevlar and steel wire reinforced fibre optic cables
• Length - 160mm
Product description :
• The adjustable blades can be set for any depth to help ensure nick-free stripping on a variety of coaxial cables
• The stripper is supplied with one round and three straight blades.
• The stripper can be used for circumferential and longitudinal stripping of fibre cables with a diameter of between 0 mm – 8 mm
Compact Plastic Duct Cutter
Size(mm.) Art.Nr.
1 - 14 79-00.6468
MOQ
1
All-in-one Fibre Cable & Kevlar Cutter
Size(mm.) Art.Nr.
0 -13 79-00.6469
MOQ
1
Multi Fibre Stripper
Size(mm.) Art.Nr.
1,0 - 3,2
3,2 - 5,6
5,0 - 8,0
79-00.2018
79-00.5878
79-00.3035
MOQ
1
1
1
FIBER TOOLS INDOOR CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
41
INDOOR CABINETS
Light Grey 7035 RAL
Standard colourways :
• Number of Flats: 1-12• Wall Mountable Cabinet with all accessories• 1 -144 optical fibers• Breakout possibility• Rubber sealings elements ø2 - ø12mm• PG for cable solution • Connectors for microducts solution• Different cable sizes• Different lock systems• Small series on customers demand
Professional street cabinet used in FTTH projects. Excellent performance, flexible structure. For small and medium buildings. Easy installation process.
SCB350 is an innovative solution that is the optimal balance between size, density and access.
Optimal for cable protection.
Comb system for easy planning, blowing and splicing documentation.
Dimensions Art.Nr. 42-800.105
External dimensions W x H x D 350 x 380 x 141 mm
Cabinet material : Aluminium
Wall Mounted (Inhouse) Distribution Cabinet S SCB350
Features and Benefits :
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
42
Light Grey 7035 RAL
Standard colourways :
• Number of Flats: 1-36• Wall Mountable Cabinet with all accessories• 1-288 optical fiber• Breakout possibility• Rubber sealings elements ø2 - ø12mm• PG for cable solution • Connectors for microducts solution• Different cable sizes• Different lock systems• Small series on customers demand
Professional street cabinet used in FTTH projects. Excellent performance, flexible structure. For small and medium buildings. Easy installation process.
SCB500 is an innovative solution that is the optimal balance between size, density and access.
Optimal for cable protection.
Comb system for easy planning, blowing and splicing documentation.
Dimensions Art.Nr. 42-800.102
External dimensions W x H x D 500 x 500 x 142 mm
Cabinet material : Aluminium
Wall Mounted (Inhouse) Distribution Cabinet L SCB500
Features and Benefits :
INDOOR CABINETS INDOOR CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
43
INDOOR CABINETS
Quick installation saves time and money
Long life Light weight
1. Comb system
Different combinations Pipe/Cable entranceSizes 5mm, 7mm, 8mm, 10mm,12mm, 14mm, 16mm
Different options Modules Standard / HD Cassettes Shrink / Crimp
4 pcs. as standard
2. Cassettes + Holder + Cover + Mixer
3. Mounting screws wall
4. Cable entrance support
5. Cable entrance insert
6. Connectors for Micorducts
7. Core attachment
Wall Mounted (Inhouse) Distribution Cabinet S/L
INDOOR CABINETS
2 pcs. as standard
2 pcs. as standard
Excellent mechanical endurance.
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
44
1.Comb System
Small series on customers demand. Different combinations. Sizes 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 14mm, 16mm
1-36x1-12x
INDOOR CABINETS
2.Splice modules
48 Splices STP6-8S Size
48 43-17.150.500-702 48 (6x8)
Art.Nr. Splices pro modul Type
- Heatshrink Splice Protector- Ø 2.5mm | L 40/45mm
72 Splices STP3-24S Size
72 43-17.150.500-703 72 (3x24)
Art.Nr. Splices pro modul
- Heatshrink Splice Protector- Ø 2.5mm | L 40/45mm
72/144 Splices* STP6-24M Size
72/144 43-17.150.500-700
Art.Nr.
- Crimp (ANT)/μ-Smouv
6 PLC with 48/96 Splices STP3-PLC Size
48/96 43-17.150.500-701
Art.Nr.
- Crimp (ANT)/μ-Smouv
INDOOR CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
45
INDOOR CABINETS
- Heatshrink Splice Protector- Ø 2.5mm | L 40/45mm
- Heatshrink Splice Protector- Ø 2.5mm | L 40/45mm
- Crimp (ANT)/μ-Smouv
- Crimp (ANT)/μ-Smouv
Core attachment
Part Art.Nr.
holder 43-965639
Straight Connector
Size(mm.) Art.Nr.
3 28-PFTC003
4 28-PFTC004
5 28-PFTC005
6 28-PFTC006
7 28-PFTC007
8 28-PFTC008
10 28-PFTC010
12
16
20
28-PFTC012
28-PFTC016
28-PFTC020
14 28-PFTC014
Cable entrance support
Size(mm.) Art.Nr.
M20 5-11 42-35009
M20 7-13 42-35010
Cable entrance insert
Size Art.Nr.
M20 42-350332
M25 42-350333
M32 42-350334
Cable entrance inset
Size(mm.) Art.Nr.
M20 4x3 42-350631
M20 4x4 42-350632
M25 6x4 42-350812
M25 4x5 42-350811
M25 3x6 42-350809
M25 3x7 42-350810
M32 9x4 42-350625
M32 8x5
M32 4x7
M32 3x8
42-350626
42-350628
42-350629
M32 5x6 42-350627
Cable entrance filler
Size(mm.) Art.Nr.
3 42-350633
4 42-350634
5 42-350635
6 42-350636
7 8
42-350637
42-350638
INDOOR CABINETS
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
46
Professional terminal box used in FTTH projects.For indoor installations (wall-mounted). It applies to wiring and protection of 4 cores indoorterminal. SC, FC, and E2000 adapters are applicable.The maximum capacity is 4F.
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 150x110x30
Fiber tray capacity : 4 core
Weight (kg) : 0.2-0.3
FPT-FN-1
Terminal box
Terminal box
INDOOR SPLICE BOXES
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
INDOOR SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
47
INDOOR SPLICE BOXES
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 165x131x34
Fiber tray capacity : 2 core
Weight (kg) : 0.2-0.3
Protection grade : IP65
FPT-FN-12
Fiber optical terminal box
Fiber optical terminal box
Professional terminal box used in FTTH projects. For indoor installations (wall-mounted). It can be used universally with standard A86 splice box. SC adapter and FC adapter are both applicable.
INDOOR SPLICE BOXES
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
48
Professional terminal box used in FTTH projects.For indoor installations (wall-mounted). 1 SC or 2 double LC adapters are applicable.
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 148x90x16
FPT-C1
Fiber optical terminal box
Fiber optical terminal box
INDOOR SPLICE BOXES
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
INDOOR SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
49
INDOOR SPLICE BOXES
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 115x86x23
FPT-1F
Fiber optical terminal box
Fiber optical terminal box
Professional terminal box used in FTTH projects. For indoor installations (wall-mounted). 1 SC or 1 double LC adapter is applicable.
INDOOR SPLICE BOXES
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
50
Professional terminal box used in FTTH projects.For indoor installations (wall-mounted). 2 SC or 4 LC adapters are applicable.
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 84x130x24
FPT-2H
Fiber optical terminal box
Fiber optical terminal box
INDOOR SPLICE BOXES
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
INDOOR SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
51
INDOOR SPLICE BOXES
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 105x82,5x22,5
FPT-2DFiber optical terminal box
Fiber optical terminal box
Professional terminal box used in FTTH projects. For indoor installations (wall-mounted). 2 SC or 2 double LC adapters are applicable.
INDOOR SPLICE BOXES
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
52
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 100,5x80,5x28,8
FPT-4F
Fiber optical terminal box
Fiber optical terminal box
Professional terminal box used in FTTH projects. For indoor installations (wall-mounted). 4 SC or 4 double LC adapters are applicable.
INDOOR SPLICE BOXES
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
STREET CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
53
INDOOR SPLICE BOXES
Light Grey 7035 RAL
Standard colourways :
• IP44 Class and IK10 Class• Tested according to EN 50298:98• 12-288 optical fibers• Breakout possibility• Organized ducts, Easy access• Rubber sealings elements ø2 - ø12mm• Easy mounting in sections• Made in Aluminium• Different combinatios • Violence protected with different lock systems• Standard cable size from ø2 - ø12mm
Professional street cabinet used in FTTH projects. Excellent performance, flexible structure. For medium and large areas. Easy installation process.
SC854523 is an innovative solution that is the optimal balance between size, density and access.
SC906023 is a slightly bigger solution for different conditions.
Optimal for cable protection.
Comb system for easy planning, blowing and splicing documentation.
Dimensions Art.Nr. 42-805.111
External dimensions W x H x D 450 x 850 x 230 mmExternal dimensions W x H x D 600 x 900 x 230 mm
Cabinet material : Aluminium
Street Cabinet for Microinfrastructure
Features and Benefits :
STREET CABINETS
IP44IK10EN 50298:98
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
54
Street Cabinet for MicroinfrastructureArt.Nr. 42-805.111
Changable Front
1. Terminal Distribution Box
Different combinations Cable entrance
4. Comb system for microducts
5.Base for grounding
6.Side cable cover
2.Cable Organizer
3.Top cover
STREET CABINETS STREET CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
55
STREET CABINETS
Street Cabinet for Microinfrastructure
Splice moduls are designed as a flexible and modular system with high fiber density. Ready for splicing.
A high splice panels density with intelligent cable management. It provides fast, intuitive and easy deployment.
Cable overlength can be layed over Cable Managment Set Elementsfor future use.
Comb system as a part of the cable managment system (CMS)
1
1
3
3
4
4
2
2
STREET CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
56
Terminal Distribution Boxes
FPT-144F.24K.BASIC -terminal box Tray capacity Box size in mm
- Heatshrink Splice Protector- Crimp Splice Protector
144 core 410×225×118
STREET CABINETS
Available in different colors and with different types of splice-cassets.
Max. amount of splicings = 144 Max. amount of cables Ø2-3.5mm = 48 Max. amount of cables Ø6-13mm = 4
Ideal for use in the SC854523 & SC906023 street-cabinets.
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
STREET CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
57
STREET CABINETS
Light Grey 7035 RAL
Standard colourways :
• 10” round profile provides maximum workspace and bend radius for all cables and connectors
• Round pedestal maintains a consistent look in the field
• Constructed of durable, high-strength materials for maximum security and long life service
• Universal mounting bracket for passives facilitates installation standardization and reduces inventory
• Optional stake mounting part for joint trench or other special applications
Designed specially for passive housing equipment. Pedestal features direct-bury base with a high rib design that do not require stake for installation. The direct-bury pedestal base allows a more uniform and secure installation and is less likely to lean or tilt.
An optional stake mounting part is available for joint trench or other special applications.A special cover security feature ensures that the pedestal locks properly without any special alignment
Dimensions Art.Nr. 42-805.222
External dimensions W x H 280 x 835 mm
Cabinet material : HDPE
Street Cabinet for Microinfrastructure
Features and Benefits :
STREET CABINETS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
58
Terminal Distribution Boxes
FPT-DW-2 Tray capacity Box size in mm
- Box material : Polymer synthetic plastic- Weight (kg) : 0.5- 0.6- Protection grade : IP65
4 core 208×153×52
Long life Light weight
1.Mounting stake
2.Distribution Box
5. Pedestal Base
4. Pedestal Lock
3.Cable Organizer
Mounted Distribution Boxe
STREET CABINETS SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
59
STREET CABINETS SPLICE BOXES
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 208x153x52
Fiber tray capacity : 4 core
Weight (kg) : 0.5-0.6
Protection grade : IP65
FPT-DW-2
Passive optical terminal box
Professional terminal box used in FTTH projects. Excellent sealing , reusable. For outdoor installations.
Optimal for cable protection under 12mm Diameter. 1:2SC or 1:4LC micro-splitter is applicable, and it also can be installed with SC or LC double core adapters.
Maximum of LC adapter is 4 cores while 2 cores is the maximum for SC adapter.
Passive optical terminal box
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
60
SPLICE BOXES
Passive optical terminal box
Professional terminal box used in FTTH projects.Excellent sealing , reusable. For outdoor installations(wall-mounted, pole-mounted - using different accessories).
Optimal for cable protection under 12mm Diameter.1:8 SC or 1:16 LC micro-splitter(also SC single core or LC double core adapters).
FPT-DW-1
Passive optical terminal box
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 210x175x50
Fiber tray capacity : 12 core
Weight (kg) : 0.5-0.6
Protection grade : IP65
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
61
SPLICE BOXES
Optical terminal box
FPT-144F.24K.BASIC
Fiber terminal distribution box
Product details :
• Box size (mm) : 410x225x118
Fiber tray capacity : 144F
Available in different colors and with different types of splice-cassets.
Max. amount of splicings = 144 Max. amount of cables Ø2-3.5mm = 48 Max. amount of cables Ø6-13mm = 4
Ideal for use in the SC854523 & SC906023 street-cabinets.
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
62
Professional terminal box used in FTTH projects.Excellent sealing, reusable. For outdoor installations.
Optimal for cable protection under 12mm Diameter.1:8SC or 1:16LC micro-splitter is applicable, and it also can be installed with SC double cores or 4 cores LC adapters.
Maximum of LC adapter is 24 cores while 12 cores is the maximum for SC adapter.
SPLICE BOXES
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 258x186x61
Fiber tray capacity : 12 or 24 core
Weight (kg) : 0.9-1.0
Protection grade : IP65
FPT-DW-3
Passive optical terminal box
Passive optical terminal box
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
63
SPLICE BOXES
Professional terminal box used in FTTH projects.For outdoor installations (wall-mounted,pole-mounted using different accessories).
Equipped with reliable fiber optic cable, soft cable fixed device. It is allowed to install the cassette optical splitter (1:4 ,1:8 ,1:16) and matched adapters.Equipped with fiber splice protection and blade PLC splitter fixing devices.
Product details :
• Box material : Polymer synthetic plastic
Box size (mm) : 504×374×134
Fiber tray capacity : 48 core
Weight (kg) : 4.8-5.2
Protection grade : IP65
FPT-A48/B48
Terminal distribution box
Terminal distribution box
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
64
FPT-DW-2.5 - is a splice closure for a multi residential units. It terminates 12 fibers in a compact design with innovative sealing concept and fiber management solution.
Easy wall mounting and access protection accessories are included in the set. This applies also to seals which are pre-perforated and ready for a quick installation.
The bottom plate offers enough place to store excess lengths of fiber. A clip-mounting for a PLC splitter and a Crimp-Splice-Holder for 12 splices are enclosed to the set.
In the upper, mobile and removable fold-out-tray there can be placed up to 6 SC/E2000 or LC-Duplex-couplings. Therefore up to 12 fibers (LC) can be led out through connectors.
Product details :
• 12x splice tray
• 1x holder for PLC-splitter
• 6x couplings in fold-out tray (12x LC)
• 3x flexible, divisible sealing sets for 2 – Ø 10 mm
( 1x Ø 10 mm, 2x Ø 7 mm, 1x 2x Ø 7 mm, 1x 12x Ø 5 mm, 1x 24x
up to Ø 3 mm )
• Strain relief
• Snapping and removable cover
• Sealable, lockable
• IP 54
• 150 x 212 x 53 mm
FPT-DW-2.5
Terminal distribution box
Terminal distribution box
SPLICE BOXES
Terminal distribution box
SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
65
Terminal distribution box
Product details :
• 166x splice tray
• 4x holder for PLC-splitter
• 2x 12 couplings in fold-out holder (48x LC)
• 4x flexible, divisible sealing sets for 2 – 10 mm Ø
( 1x Ø 10 mm, 2x Ø 7 mm, 3x 12 x Ø 5 mm, 2x 24x up to
Ø 3 mm )
• Strain relief
• Snapping and removable cover
• Sealable, lockable
• IP 54
• 209 x 341 x 91 mm
FPT-DW-4
Passive optical terminal box
FPT-DW-4 - is a splice closure for a larger number of residential units. It terminates 166 fibers in a compact design with innovative sealing concept and fiber management solution.
Easy wall mounting and access protection accessories are included in the set. This applies also to seals which are pre-perforated and ready for a quick installation.
The bottom plate and the cassettes offer enough place to store excess lengths of fiber. Four clip mountings for PLC-Splitter and two 12x crimp-splice-holder are enclosed to the set.
The 2 x 6 splice cassettes can be removed and have space for up to144 splices as well as unused fiber excess lengths.
Up to 2x 12 SC/E2000 or LC-duplex-couplings can be placed in the removable flap-holder. Therefore up to 48 patchcords (LC) can be connected.
SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
66
SPLICE BOXES
Splice closure
Product details
• Box material : modified polymer plastic
Sealing material : vulcanized rubber
Cable entrances : 3 - 2 round ports and 1 oval port
Suitable cable diameter : round port - ø8 - 17,5 mm
oval port - ø10 - 17,5 mm
Box size (mm) : 295×220×90
Weight (kg) : 2.1-2.3
Protection Rate : IP68
Installation Method: Wall/Pole-mounted, Manhole
FPT-9401
Splice closure
Professional Splice closure used in FTTx projects.Used for outdoor installations (Manhole, Wall/Pole-mounted)
Easy to use and install, provides security for fiber optic connections. Resistant to pressure, twisting and crushing. Suitable for usage with the various optical cables. Excellent sealing performance and compact appearance.
Can be equipped with a powerful RFID card used for tagging underground cable or pipe infrastructures, manholes, access points and more.
Excellent pressure resistance
Great sealingperformance
SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
67
SPLICE BOXES
Small Port Seals
Big Port Seals
Seal gasket parts
Seal gasket parts
Cable size
Cable size
14#+Plastic Washer I (standard)
40# (standard)
ø 12 - 17,5 mm
ø 10 - 16,0 mm
ø 8 - 12,0 mm
4-(ø 5 - 7 mm)
8-(ø 3 / 5 mm)
6 self support soft cable
8-8 figure soft cable/ ø 5mm
2-(4,5*8,2 flat cable)
41#+Plastic Washer I (standard)
20#+2*20#Seal Gasket Washer (optional)
36#+2*36#Washer (op-tional)
18#+Plastic Washer I (optional)
19#+Plastic Washer I (optional)
21#+Plastic Washer I (optional)
36 Splices STP6-8S
Size Art.Nr.
36 43-17.150.500-778
36 Splices
Size Art.Nr.
36 43-17.150.500-777
+
+
+
+
+
+2x
+2x
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
68
Splice box cover is tagged with a powerful RFID card for tagging underground cable or pipe infrastructures, manholes, access points and more.
It can be mounted vertically on any underground or hidden installation directly or by using rubber bands (RFID tag extruded inside the band).
SPLICE BOXES
Splice closure localisation
RFID Tag
Size Art.Nr.
95x65mm Inteli-Rfid-Card
Tag Size95 x 65 x 1 mm
Rangeup to 100cm
RFID Card tracking
SPLICE BOXES
Stress resistance
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
69
Splice box cover with it’s rubber sealing clamps harder due to higher pressure from above.
It’s mounting procedure is very simple and effective. It can be additionally strengthen by padlock or nylon stripes
SPLICE BOXES
Stress resistance
High Stress Resistance
Clamping rubber seal
Additionalloads
Excellent pressure resistance
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
70
SPLICE BOXES
FPT-AA-BASIC FPT-AB-BASIC FPT-AC-BASIC
Ø300 x h380 Ø300 x h505 Ø300 x h630
43-17.190.500-737 43-17.190.500-738 43-17.190.500-828
6 14 20
36 84 120 864 2016 2880 432 1008 1440
18 42 60 576 1344 1920 288 673 960 36 84 120
36 84 120 288 672 960
18 42 60 432 1008 1440
Tray Nr
Tray Nr
Tray Nr
Splitter Nr
Splitter Nr
Splitter Nr
Maximum Splices Maximum Splices Maximum Splices
Standard Standard Standard µ-Smouv µ-Smouv µ-Smouv ANT ANT ANT
Name
Size
Part Nr
Tray Pack
STP6-24M
STP6-PLC
STP6-8S
STP6-24S
Available in 3 different heights with a maximum capacity of 2880 splices, with μ-SMOUV sleeves.
Suitable for outdoor use wit wall and pole mounting kits, it can support PLC splitter installation as well. UV resistant, RoHS complaint and IP68 certified solution.
FPT-AA FPT-AB FPT-AC
Fiber Distribution Closures
SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
71
SPLICE BOXES
Boost and complete your closure with our sealing kits in round and oval style, our traypacks for splitter, mechanical or fusion sleeves and our installation kits.
Fiber Distribution Closures
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
72
SPLICE BOXES
Wall mounting bracket
Size Art.Nr.
- 43-17.150.500-654
Pole mounting bracket
Size Art.Nr.
- 43-17.150.500-826
Oval port heatshrink seal
Size Art.Nr.
- 43-17.750.500-789
72/144 Splices* STP6-24M
Size Art.Nr.
72/144 43-17.150.500-700
6 PLC with 48/96 Splices STP3-PLC
Size Art.Nr.
48/96 43-17.150.500-701
48 Splices STP6-8S
Size Art.Nr.
48 43-17.150.500-702
Round port heatshrink seal
Size Art.Nr.
- 43-17.750.500-770
72 Splices STP3-24S
Size Art.Nr.
72 43-17.150.500-703
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
SPLICE BOXES
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
73
SPLICE BOXES
Size Art.Nr.
2x16mm 43-17.750.500-633
Oval cold seal 2 ports( Cable OD from 0 to 16 mm )
Round cold seal 4 ports( Cable OD from 0 to 8 mm )
Size Art.Nr.
4x8mm 43-17.750.500-634
Round cold seal 4 ports( Cable OD from 0 to 10 mm )
Size Art.Nr.
4x10mm 43-17.190.500-A00
Size Art.Nr.
8x6mm 43-17.750.500-761
Round cold seal 8 ports( Cable OD from 0 to 6 mm )
Round cold seal 2 ports( Cable OD from 7 to 12 mm )
Size Art.Nr.
2x12mm 43-17.750.500-861
Round cold seal 1 port( Cable OD from 0 to 16 mm )
Size Art.Nr.
1x16mm 43-17.750.500-862
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
74
RACK SYSTEMS
Light Grey 7035 RAL
Standard colourways :
• EIA-310-E• IEC297-2• DIN41491 PART 1• DIN41494 PART 7• GB/T3047.2-92 standard• compatible with ETSI standard
Racksystem Patchmodul Type 1 is provided with XODF Rack and other steel parts in light grey 7035 RAL colour.
FPT Rack height can be adjusted via four foot mountings in the bottom. Additional racks can be added on the sides or on the backside. Cable entrance is on the top/bottom of both sides or on the top/bottom of the Racksystem.
Racksystem is provided with 32 Pcs. Patch Panels 72 splices each that allows total of 2304 splices. Optimal for cable protection.
Comb system for easy splicing
Dimensions Art.Nr. 43-0903.01
External dimensions W x H x D 900 x 2174 x 300 mmCabinet material : painted SteelWeight : 51,48 kg Racksystem 172,08 kg Racksystem Patchmodule Type 1
Racksystem Patchmodul Type 1
Standards :
Standards :
RACK SYSTEMS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
75
RACK SYSTEMS RACK SYSTEMS
• Multifunctional use in the FTTx and data center areas
• Front access for easy patching• Adjustable height• Additional racks can be added on the sides or
back to back• Patch Cable Management• 32 Pcs. Patch Panels 72 splices each• Total 2304 splices• Cable entrance top/bottom both sides• Small series on customers demand
Racksystem Patchmodul Type 1 - overview
Features and Benefits :
Patch moduls are designed as a flexible and modular system with high fiber density. Ready for splicing.
A high patch panels density with intelligent cable management. It provides fast, intuitive and easy deployment.
Patch cable overlength can be layed down over Cable Managment Set Elements.
Comb system as a part of the cable managment system (CMS)
1
1
3
3
4
4
2
2
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
76
Racksystem Patchmodul Type 1 SetArt.Nr. 43-0903.01
Quick installation saves time and money
Excellent mechanical endurance.
Long life Compact size
1. XODF Rack + Backside CMS 1x Art.Nr. 42-1402.10
Different options 51,48 kg
0,24 kg
32 Pcs. Patch panels 72 splices each in 4 groups
3,32 kg
0,57 kg
0,35 kg
0,52 kg
0,52 kg
2. Patch panels 32x Art.Nr. 42-951302
3. Patch panels holder 8x Art.Nr. 43-2102.08
5. Patch Cable Managment Set 8x Art.Nr. 43-2002.06
4. Comb system set 4x Art.Nr. 43-100717.02.1
6. Patch panels lock 4x Art.Nr. 43-100717.01
7. Cable organizer 4x Art.Nr. 43-2002.10
RACK SYSTEMS RACK SYSTEMS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
77
RACK SYSTEMS
Splice Cassette
Size(mm.) 155 x 92 x 8 mm
Splice Cassette Cover
Size(mm.) 155 x 92 x 2 mm
Straight Connector
Size(mm.) Art.Nr.
3 28-PFTC003
4 28-PFTC004
5 28-PFTC005
6 28-PFTC006
7 28-PFTC007
8 28-PFTC008
10 28-PFTC010
12
16
20
28-PFTC012
28-PFTC016
28-PFTC020
14 28-PFTC014
Core attachment
Part Art.Nr.
holder 43-965639
RACK SYSTEMS
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
78
• XODF Rack 1x• Backside CMS Panel 1x• Splicebox 288 splices 4x• Splicebox Comb set 4x• Comb system set 3x• Cable organizer 2x
Racksystem Splicebox Type 2 is provided with XODF Rack and other steel parts in light grey 7035 RAL colour.
FPT Rack height can be adjusted via four foot mountings in the bottom. Additional racks can be added on the sides or on the backside. Cable entrance is on the top/bottom of both sides or on the top/bottom of the Racksystem.
Racksystem is provided with 4 Pcs. Spliceboxes 288 splices each that allows total of 1152 splices.
System elements :
Light Grey 7035 RAL
Standard colourways :
Dimensions Art.Nr. 43-0903.02
External dimensions W x H x D 900 x 2174 x 300 mmCabinet material : painted SteelWeight : 51,48 kg Racksystem 74,32 kg Racksystem Splicebox Type 2
Racksystem Splicebox Type 2
RACK SYSTEMS RACK SYSTEMS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
79
RACK SYSTEMS
Features and Benefits :
1
3
4
2
• Multifunctional use in the FTTx and data center areas
• Front access for easy patching• Adjustable height• Additional racks can be added on the sides or
back to back• Cable Management• 4 Pcs. Spliceboxes 288 splices each• Total 1152 splices• Cable entrance top/bottom both sides• Small series on customers demand
Racksystem Splicebox Type 2 is provided with 4 Spliceboxes - splice capacity 288
Intelligent cable managementprovides fast, intuitive and easy deployment.
Comb system as a part of the cable managment system (CMS)
Splice Cassettes organizer
1
3
4
2
Racksystem Splicebox Type 2 - overview
RACK SYSTEMS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
80
Quick installation saves time and money
Excellent mechanical endurance.
Long life
Racksystem Splicebox Type 2 SetArt.Nr. 43-0903.02
1. XODF Rack + Backside CMS 1x Art.Nr. 42-1402.10
Different options 51,48 kg
0,26 kg
0,52 kg
4,95 kg
0,32 kg
2.Cable organizer 2x Art.Nr. 43-2002.10
3. Splicebox 288 splices 4x Art.Nr. 42-950987
4. Splicebox Comb set 4x Art.Nr. 43-2002.04
5. Comb system set 3x Art.Nr. 43-2002.05
Compact size
RACK SYSTEMS RACK SYSTEMS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
81
RACK SYSTEMS
Core attachment
Part Art.Nr.
holder 43-965639
RACK SYSTEMS
Art.Nr. Pcs.
150pcs/bag 27-010.1614
Crimp spliceseams
Size
30x3x1,2mm
Heatshrink spliceseams
Size Art.Nr. Pcs.
1,0x45mm 100pcs/bag 27-010.1605
Splice modules
48 Splices STP6-8S Size
48 43-17.150.500-702 48 (6x8)
Art.Nr. Splices pro modul Type
- Heatshrink Splice Protector- Ø 2.5mm | L 40/45mm
72 Splices STP3-24S Size
72 43-17.150.500-703 72 (3x24)
Art.Nr. Splices pro modul
- Heatshrink Splice Protector- Ø 2.5mm | L 40/45mm
72/144 Splices* STP6-24M Size
72/144 43-17.150.500-700
Art.Nr.
- Crimp (ANT)/μ-Smouv
6 PLC with 48/96 Splices STP3-PLC Size
48/96 43-17.150.500-701
Art.Nr.
- Crimp (ANT)/μ-Smouv
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
82
ADJUSTABLE DRUMRACK
galvanized steel
Standard colourways :
• Flexible steel frame (galvanized steel)• H & V lifting towers with hand crank (galvanized steel)• 4 x ball bearings (galvanized steel)• 2 x axle cones (aluminum)• 1 x long axle L = 1040 mm (aluminum)• 1 x short axle L = 740 mm (aluminum)• 1 x allen key (6 mm)• 2 x pre-mounted spirit levels• 4 x quick release pins
• Max. load 500 kg• Drum diameters Ø 400-1250 mm• Drum width 200-800 mm• Drum hole diameter Ø 60-89 mm
Danish-made, high quality, adjustable, rolling rack designed for use with both small and medium fiber drums.
Smart design makes it possible to adjust the width of the stand, so it is ideal for use in the car.
Art.Nr. 79-140918-99
Min. External dimensions W x H x D 740 x 670 x 610 mm
Max. External dimensions W x H x D 1040 x1000 x 610 mm
Weight : 39 kg (whole set) 35 kg (without 2 axles and 2 cones)
Rack material : Galvanized steel (rack) Aluminium (axles)
Rolling rack for cable drums
Set Componets :
Features :
ADJUSTABLE DRUMRACK
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
83
ADJUSTABLE DRUMRACK
Rolling rack for cable drums
Adjustable width
Adjustable height
Spirit levelsboth sides
Quick ReleasePins
SwinghandleM22 hex outputpossible
Quick ReleasePins
6 mmAllen key
Easy to disassemble/assemble
frame regulation 740 /1040 mm
short distanceusing the swinghandle
hor. / ver. surfaceleveling
mounting cons on the axle
Adjustable height
large distance
max. 5oRight and left side cantilt forwards/backwardsindependently of each other, max. 5 degrees.
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
84
ADJUSTABLE DRUMRACK
Rolling rack for cable drums
• Easy to assemble and disassemble• Fast height adjustment with QuickRelease Pins• Adjustable width for different drum types• Right and left side can tilt forwards/backwards
max. 5o
• Ideal for car usage and uneven surfaces• Light weight
Features and Benefits :
Drum Rack set is easy to disassemble and transport.
Quick Release Pins for fast height and witdh adjustments.
Aluminium cons mounted on the axle to fix the cable drum.
Lifting towers with hand crank (galvanized steel). Swinghandle can be replaced with M22 output.
1
1
2
3
4
4
3 2
ADJUSTABLE DRUMRACK
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
85
Fiberpowertech Drumrack-Lock set is a direct fit to the Fiberpowertech Drumrack, easy to use coil/spring-mechanism lets you secure the drumrack with ease.
Only sold as a set, left + right.
Materials :
• El.galvanised steel
ADJUSTABLE DRUMRACK
Drumrack lock ( L+R Set )
Size(mm.) Art.Nr.
- 79-140918-90
MOQ
L+ R set
Features :
Easy toassemble
L+R sidemontage
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
86
Fiber/Cable Diameter 0,8-5,5 mm
Tube Size (OD) 5-16 mm
Max. Pushing Force -
Install Speed to 100 m/min
Distance Up to 2,5 km
Recommended Airflow 200-500 l/per min Recommended Pressure 8-16 bar air
Machine: Control Box: Length: 25 cm 25 cm Width: 15 cm 16 cm Height: 22 cm 13 cm Weight: 9,7 kg 1,9 kg
FPT MicroFlowModel
BLOWING MACHINES
The blowing process
• The machine is placed on a stable surface and the fiber cable is placed in the machine. • The duct, in which the fiber cable is to be blown, is placed
in the machine .• The pulling wheels are adjusted. • With the control unit the torque level, speed and blowing
distance can be adjusted.• Press the start button to start the machine, and after 10-20 m the air is turned on.• The cable blowing is now automatic and can be
stopped either manually by pressing the stop button or automatically when the preset blowing distance has been reached.
Control unit
FPT Microflow’s control unit has a user friendly touch display, which can be used to make a number of different adjustments:
• Adjustment of maximum motor torque• Adjustment of maximum speed• Presetting of counter with automatic stop after a certain
blowing distance• Acceleration - from start to maximum speed• Deceleration - from maximum speed to stop• The display shows different information during blowing,
for instance: Meter count, Actual speed and Actual torque
Protection technology
• Unique protection technology that stops the machine if the fiber cable meets an obstacle.
• Unique protection technology that stops the machine if the motor exceeds the preset maximum torque level.
In both cases the machine stops immediately so the fiber cable does not get damaged. After the protection technology has stopped the machine, it will automatically start up again. It will try 3 times total to get through the obstacle, if it still has not succeeded it will come to a full stop.
FPT MicroFlow
BLOWING MACHINES
FPT MiniFlow
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
87
BLOWING MACHINES BLOWING MACHINES
Fiber/Cable Diameter 4-12,0 mm
Tube Size (OD) 7-20,0 mm
Max. Pushing Force -
Install Speed to 100 m/min.
Distance Up to 3.5 km
Recommended Airflow 1.000 l/pr. min. Recommended Pressure 8-16 bar air
Length: 650 mm Width: 220 mm Height: 225 mm Weight: 24kg.
FPT MiniFlowModel
The following equipment is needed to run:• Hydraulic pump + control valve.• High pressure compressor + hoses.
We offer all accessories on request.Full training - theory and practice - is always provided.
User friendly design
FPT MiniFlow has a user friendly design, that makes for easy operation. The machine is designed with the main focus on functionality that includes:
• Rugged Stainless construction• Safety chain guard• Large easy to use adjustable knobs • Push force indicator
Efficient cable blowing
FPT MiniFlow is a compact and efficient cable blowing machine. The machine is capable of installing fiber cable at a speed up to 100 m/min. and up to a distance of 3,5 km.
Built-in meter counter
FPT MiniFlow has a built-in mechanical meter counter. The counter is easy to read and is robust and simple to operate. OPTIONAL: available with electronic counter and tachometer.
Flexibility
FPT MiniFlow is very flexible, the machine can quickly be adapted to accommodate different cable and duct sizes.
Cable damage safety
FPT MiniFlow has a unique monitoring system, which continuously monitors the pushing force, applied on the fiber cable. This makes it possible to stop the drive wheels before the cable is damaged.
FPT MiniFlow
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
88
The following equipment is needed to run:• Hydraulic pump + control valve.• High pressure compressor + hoses.
We offer all accessories on request.Full training - theory and practice - is always provided.
User friendly design
FPT MultiFlowhas a user friendly design, which makes the machine easy to operate. The machine is designed with main focus on functionality that makes cable blowing is easy.
Efficient cable blowing
Fiber MultiPower is a very efficient cable blowing machine. It can blow cables with a speed up to 80 m/min. It is possible to blow distances up to 10 km.
Cable blowing using either air or water
With Fiber MultiPower it is possible to install fiber optic cables using either air or water. With water assisted cable blowing you can achieve optimal results, especially when installinglarger cables or blowing long distances.
Robust
Fiber MultiPower is constructed in a way that it is robust and can withstand being used as the special conditions there sometimes are at a cable blowing location are taken into account.
Flexibility
Fiber MultiPower is very flexible as the machine can be quickly changed to blow different sizes and numbers of micro ducts. There are many different sizes and combinations available to fit the different dimensions needed in a specific situation.
FPT MultiFlow
Fiber/Cable Diameter 8-32,0 mm
Tube Size (OD) 18-70 mm
Max. Pushing Force -
Install Speed to 80 m/min.
Distance Up to 10 km*
Recommended Airflow 8.000-12.000 l/pr. min. Recommended Pressure 8-12 bar air
Length: 700 mm Width: 230 mm Height: 350 mm Weight: 40 kg.
FPT MultiFlowModel
7 / 5,5 mm5x 8x 12x 3x 5x 7x 10 / 8 mm - 3x 5x 12 / 8 mm - - 4x 14 / 11,5 mm
32mm 40mm 50mm MICRODUCTRELINER
BLOWING MACHINES BLOWING MACHINES
FPT-KAT Micro
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
89
FPT MultiFlow
BLOWING MACHINES BLOWING MACHINES
Fi
Fiber/Cable Diameter 3 -8 mm OD
Tube Size (OD) 7 -20,0 mm OD
Max. pushing force 180N
Install Speed to 100 m/min.
Distance 2.5 km
Recommended Airflow - Motor Air Pressure 7 bar
Length: 330 mm Width: 220 mm Height: 280 mm Weight: 7 kg.
Fiber Kat Micro Model
Accessories• All of our machines are delivered with aluminium carrying case• Sealing kit for cable diameters of 3-8mm and external duct diameters of 10mm• Compressed air hose 10m
ALL YOU NEED IS AIR
High Performance
The cable blowing machine type FPT-KAT Micro may be used for the installation of sensitive micro-cables into micro-duct in just one procedure using compressed air.
During the blow-in operation the micro-cable is passing the cabling caterpillar. The integrated compressed-air connector consists of a two-piece aluminium casing.
Split sealing washers hermetically surround the cable to be blown-in.
The cable is driven forward by the air supplied from a suitable compressor. Air regulation is done by a valve which is integrated into the machine.
Two drive belts guarantee an excellent closed linkage to the cable.The upper belt can manually be moved up and down.
The aluminium-frame construction of the caterpillar guarantees stability, long operating life and light weight.
FPT-KAT Micro
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
90
Accessories• All of our machines are delivered with aluminium carrying case• Electronic speed/meter counter• Adapter for cable OD 3-12mm• Adapter for pipe OD 10-12-14-16-20 mm• 2 sets. rubber band• Gaskets set for fibercable 3-12mm• 10 meter ¾” airhose with couplers
ALL YOU NEED IS AIR
High Performance
The cable blowing machine type FPT-KAT may be used for the installation of sensitive micro-cables into micro-duct in just one procedure using compressed air.
During the blow-in operation the micro-cable is passing the cabling caterpillar. The integrated compressed-air connector consists of a two-piece aluminium casing.
Split sealing washers hermetically surround the cable to be blown-in.
The cable is driven forward by the air supplied from a suitable compressor. Air regulation is done by a valve which is integrated into the machine.
Two drive belts guarantee an excellent closed linkage to the cable.The upper belt can manually be moved up and down.
The electronic measuring device displays the blown-in cable length as well as the cable speed during blowing work.
The aluminium-frame construction of the caterpillar guarantees stability, long operating life and light weight.
FPT-KAT Mini
Fi
Fiber/Cable Diameter 3 -12 mm OD
Tube Size (OD) 7 -20,0 mm OD
Max. pushing force 400N
Install Speed to 120 m/min.
Distance 3.5 km
Recommended Airflow - Motor Air Pressure 7 bar
Length: 540 mm Width: 240 mm Height: 290 mm Weight: 12 kg.
Fiber Kat Mini Model
BLOWING MACHINES BLOWING MACHINES
FPT-KAT Mini Log Box
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
91
FPT-KAT Mini
BLOWING MACHINES BLOWING MACHINES
Features
1. Blowing data logging
- Blowing length, cable speed
- Engine pressure
- Push force on the cable
- Air pressure in the duct
- Environmental data (GPS, temperature, ect.)
2. Frame parameter preselection
- Pipe, cable information
- Construction project, section
- Compressor, etc.
3. Diagram Live View
4. Internal memory for re-selection
Accessories
• All of our machines are delivered with aluminium
carrying case
• Electronic speed/meters counter
• Adapter for cabel OD 3-12mm•
• Adapter for pipe OD 10-12-14-16-20 mm
• 2 sets Rubber band
• Gaskets set for fibercable 3-12mm
• 10 meter ¾” airhose with couplers
Fi
Fiber/Cable Diameter 3 -8 mm OD
Tube Size (OD) 7 -20,0 mm OD
Max. pushing force 180N
Install Speed to 120 m/min.
Distance 3.5 km
Recommended Airflow - Motor Air Pressure 7 bar
Length: 540 mm Width: 240 mm Height: 290 mm Weight: 12 kg.
Fiber Kat Mini Log Box Model
ALL YOU NEED IS AIR
High Performance
Through the eletroniic measure system is the FPT-KAT MINI Innovation on the fiber blowing equipment market and is listed as aproved by Deutsche Telekom. All relevant data are automatically recorded and output as PDF in the USB port for data transfer.
FPT-KAT Mini Log Box
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
92
A special water based lubricant for fiber optical installations. LUBRIC allows to prelube the pipe or cable before/during the blowing procedure.
It adheres perfectly to the cable or internal pipe surface and leaves a very tiny film. Lubric protects cables against dirt and retains its lubricating power even when water is present.
LUBRIC reduces surface friction and increases the blowing distance. Due to it’s consistency, fluidity and low evaporation rate, LUBRIC is recommended for all cable/pipe installations.
Materials :
• Water emulsion of different kind of polymers
Technical Specification:
• White liquid• None odour• Viscosity 120 sec. Ford cup diam. mm 4 at 20°C• Mass Density 1,030 (+/-) 0,03 gr/cm3• PH 7,5 (+/-) 0,5• Non Inflammable• Temperature -5°C to +70° C• Biodegradable• Non-toxic
FPT Lubric Micro 4-20mm &FPT Lubric Pipe 25-60mm
Size Art.Nr.
500ml Lubric-micro 0,5l
25l Lubric-micro 25l
MOQ
12pcs in box
500ml Lubric-pipe 0,5l 12pcs in box
-
- 25l Lubric-pipe 25l
Suggested quantities :
5 ml x 1000 m for internal Ø 4 mm10 ml x 1000 m for internal Ø 8 mm15 ml x 1000 m for internal Ø 12 mm20 ml x 1000 m for internal Ø 14 mm25 ml x 1000 m for internal Ø 16 mm35 ml x 1000 m for internal Ø 20 mm60 ml x 1000 m for internal Ø 25-30 mm70 ml x 1000 m for internal Ø 30-40 mm80 ml x 1000 m for internal Ø 40-60 mm
FPT Lubric Allround Gliss
Size Art.Nr.
1l Lubric-gliss 1,0l
25l Lubric-gliss 25l
MOQ
-
-
LUBRICANTS LUBRICANTS
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
93
LUBRICANTS
A special water based lubricant for fiber optical installations.LUBRIC Super 5000/5000 Winter allows to prelube the pipe orcable before/during the blowing procedure also in winter season(Super5000Winter).
It adheres perfectly to the cable or internal pipesurface and leaves a very tiny film. LUBRIC Super 5000/5000 Winterprotects cables against dirt and retains its lubricating power evenwhen water is present.
LUBRIC Super 5000/5000 Winter reduces surface friction andincreases the blowing distance. Due to it’s consistency, fluidityand low evaporation rate, LUBRIC Super 5000/5000 Winter isrecommended for all cable/pipe installations.
Materials :
• Water emulsion of different kind of polymers
Technical Specification:
• White liquid• None odour• Viscosity about 500 cps.• PH 7,0• Not flammable• Temperature Lubric Super5000Winter : -10°C to +70° C• Temperature Lubric Super5000 : 0°C to +70° C• Biodegradable• Non-toxic
FPT Lubric Super5000 FPT Lubric Super5000Winter
Size Art.Nr.
250ml Lubric-S5000
250ml Lubric-S5000Winter
MOQ
15pcs in box
-
LUBRICANTS
93
WWW.FIBERPOWERTECH.DK 14.10.2019
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk