INSTALLATION MANUAL

FSM Data Connection

Please read this installation manual

carefully before installation.

Keep this manual in a safe place.

Utility Software

for FSM-60S/60R/18S/18R

LICENSE AGREEMENT READ THE TERMS OF THIS AGREEMENT CAREFULLY. Fujikura Co., Ltd. (hereinafter referred to as "Fujikura") provides this software product and the attached files (hereinafter referred to as "licensed product") for use on the following terms and conditions. If you do not agree to the terms of this license, do not install, copy, or otherwise use this licensed product. 1. Licensing Policy (a) The software may be installed in your computers as long as you comply the terms and condition of this License Agreement.

(b) You may make a single archival copy of the Software, but otherwise may not copy, modify, or distribute Software except Fujikura permits specifically by a document.

2. Prohibited Uses You may NOT: (a) Sell, lend, give away or in any way transfer copies of this software package to any other person or entity except as for backup purposes, or allow any other person to make copies of this licensed product.

(b) You may not rent, lease, or lend the Software. (c) Decompile, or reverse engineer the Software. (d) Export, re-export, or import the Software from/to another country. 3. Attribution of Intellectual Property Right "Use of the licensed products, unless pursuant to the terms of a license granted by Fujikura or as otherwise authorized by law, is an infringement of Intellectual Property Rights. 4. Limitation of Liability (a) Use of this licensed product is at your own risk, Fujikura assumes no liability and shall not be responsible for, and you hereby assume all risk of: any linkage to any communications with any third parties, and any damage resulting from any computer viruses or from linkage to any third party sites. Fujikura shall not be responsible for any direct, indirect, incidental, consequential damages arising out of your use.

(b) Licensed products will not be liable for any consequential damages under any circumstances, unless such exclusion is forbidden by law.

5. Nonassignability of Rights and Obligations Licensee may not assign or transfer any rights or obligations under this Agreement without prior written approval from Fujikura. 6. Termination "Your rights under this License will terminate automatically without notice from Fujikura if you fail to comply with any term(s) of this License Agreement. Upon the termination of this License, you shall cease all use of the licensed products and destroy all copies, full or partial, of the licensed product." 7. Term of Limitation This license agreement shall be effective until it goes into effect from the time of being used of this product, and the end of use of this product or Fujikura cancels this license agreement by regulation of the 6th clause. 8. Copyright Notice Copyright(c) Fujikura ltd. 2008. All Rights Reserved.

1

1 Introduction ..............................................................2

2 System Requirements .............................................2

3 Windows Update ......................................................3

4 Install.........................................................................4

4.1 STEP 1 : Start Installation...................................................................... 4

4.2 STEP 2 : Install the USB driver ............................................................. 6

4.3 STEP 3 : Install FSM Data Connection ................................................. 7

5 Test Run..................................................................10

5.1 Start Up.................................................................................................. 10

5.2 Communication Test............................................................................. 11

6 Uninstall ..................................................................15

6.1 STEP 1 : Start Uninstallation............................................................... 15

6.2 STEP 2 : Uninstall the USB driver....................................................... 16

6.3 STEP 3 : Uninstall FSM Data Connection........................................... 17

7 Re-install USB driver .............................................19

8 Contact Address ....................................................20

Table of Contents

2

1 Introduction FSM Data Connection (“FSMDC”) is the software included in the package of FSM-60S/60R/18S/18R, the splicer series produced by Fujikura. Read this installation manual before installing FSMDC.

2 System Requirements

Computer and processor 1.6 gigahertz(GHz) processor or higher (In case CoreTM2Duo, Intel Corp)

Operating System Microsoft Windows XP with Service Pack(SP)2, Windows Server 2003 with SP1, Windows Vista (32bit) *The operating system must be updated by latest update

Memory 1GB (Windows XP SP2, Windows Server2003 SP1) 2GB (Windows Vista)

Hard Disk 100MB available space

Drive CD-ROM or DVD drive

Display 1024x768, or higher resolution monitor

Other USB 2.0 Port Capable of Internet Access, 56kbps or higher Broadband access is recommended

3

3 Windows Update Operation System must be updated by latest update to run FSMDC. Connect your PC to the internet and perform Windows Update or Microsoft Update before starting installation. To go to Windows Update, select Start → All Programs → Windows Update.

In case of Windows Vista

In case of Windows XP

4

4 Install

4.1 STEP 1 : Start Installation (1) Insert the instruction CD into CD-ROM or DVD drive. (2) After a few second, the instruction menu will appear.

* If the menu does not appear, double click “fsmInstruction.exe” which is in the root of the drive.

(3) Click [Setup FSM Data Connection] button [1].

1

Do not connect USB cable before completing installation.

5

(4) License Agreement confirmation window will appear [1]. Click [Accept] [2]

button if you accept the License Agreement. Installation will start by clicking [Accept] button. If you do not accept the License Agreement, click [Decline] [3] button. In this case, installation should be cancelled.

1

3 2

6

4.2 STEP 2 : Install the USB driver (1) Installation of the USB driver will start after the License Agreement accepted. (2) The installation of the driver has completed. Click [Finish] button [4].

4

7

4.3 STEP 3 : Install FSM Data Connection (1) Click [Next] [5] button. (2) Choose an installation folder [6] and click [Next] button [7].

5

6

7

8

If you want to use the software only by yourself click [Just me] [8] in case the PC is shared by two or more user accounts.

8

(3) Click [Next] button [9]. (4) Installation is in progress.

9

9

(5) Installation has finished. Click close [10] button to close this window. (6) Click [Exit] button [11]. Short Cut will appear on the desktop.

10

11

10

5 Test Run

5.1 Start Up (1) Double-click the short cut on the desk top or click the program name in the

Start -> All Programs menu.

Trouble Shooting

a) FSM Data Connection does not start。

Windows may not be updated by the latest update. Perform Windows Update to update the operating system.

b) It takes long time to start the program. Approximately more than 10 seconds. Memory capacity or the processor speed may be insufficient.

11

5.2 Communication Test (1) Connect PC and the splicer by USB cable. Then turn on the splicer power and

confirm the "READY" displayed on the monitor of the splicer.

12

(2) “Found New Hardware” dialog may appear. In this case, click [Next] button [1]

and then click [Finish] button [2].

1

2

13

(1) If icon does not appear at [3].

a) Confirm the cable connection. b) The USB driver is not installed correctly. In this case, install the

USB driver again. (Refer to the chapter 7 “Re-install USB driver”)

(2) If a picture of the splicer is not shown at [4]. a) Confirm the cable connection. b) The splicer may not be in "READY" status. Press reset key to set

the splicer into the "READY" status.

Trouble Shooting

3

4

5

14

(3) Click [Start Video] [5] and confirm that the image on the splicer's monitor is

shown on the window.

The same image as the splicer is not displayed. Memory capacity or the processor speed may be insufficient. It is necessary to Increase memory or upgrade the processor.

Trouble Shooting

15

6 Uninstall

6.1 STEP 1 : Start Uninstallation (1) Insert the instruction CD into CD-ROM or DVD drive. (2) After few second, the instruction menu will appear. * If the menu does not appear, double click the "fsmInstruction.exe" which is in the root of CD drive.

(3) Click [Setup FSM Data Connection] button [1]. (4) Click [Uninstall] button [2].

1

2

16

6.2 STEP 2 : Uninstall the USB driver (1) The confirmation dialog will appear. Click [OK] [3] button to continue

uninstallation. (2) Click [Finish] [4] button

3

4

17

6.3 STEP 3 : Uninstall FSM Data Connection

(1) Click “Remove FSM Data Connection” [5] and then click [Finish] [6] button to proceed.

5

6

18

(2) Uninstallation has completed. Click [Close] [7] button to return the Instruction

Menu. (3) Click [Exit] [8] button to quit.

7

8

19

7 Re-install USB driver Following procedure shows how to re-install the USB driver. (1) Uninstall the USB driver with reference to Chapter 6. (2) Uninstallation of FSM Data Connection will start continuously. Click [Cancel]

button [1] to quit this uninstallation.

(3) Install the USB driver with reference to Chapter 4. (4) Uninstallation of FSM Data Connection will start again. Click [Cancel] [1] to quit

this uninstallation. (5) In order to confirm the driver is installed correctly, run FSMDC with the

procedure shown in Chapter 5.

1

20

8 Contact Address

Inquiries concerning products should be made to the nearest sales agency or one of the following:

Fujikura Europe Ltd.

C51 Barwell Business Park Leatherhead Road, Chessington, Surrey KT9 2NY England Tel. +44-20-8240-2000 (Service: +44-20-8240-2020) Fax. +44-20-8240-2010 (Service: +44-20-8240-2029) URL http://www.fujikura.co.uk

AFL Telecommunications

260 Parkway East Duncan, SOUTH CAROLINA 29334 U.S.A. Tel. +1-800-235-3423 (Service: +1-800-866-3602) Fax. +1-864-433-5560 (Service: +1-800-433-5452) P.O.Box 3127 Spartanburg, SC 29304-3127 URL http://www.AFLtele.com

Fujikura Asia Ltd.

460 Alexandra Road #22-01 PSA Building Singapore 119963 Tel. +65-6-2711312 Fax. +65-6-2780965 URL http://www.fujikura.com.sg

Fujikura Ltd. Optical Fiber & Equipment Department International Sales & Marketing 1-5-1 Kiba, Koto-ku, Tokyo 135-8512 Japan Tel. +81-3-5606-1164 Fax. +81-3-5606-1534 URL http://www.fujikura.co.jp/front_e.htm

--------------------------------------- End of Document -------------------------------------------