FRP Columns FRP - jbmillworks.com
Transcript of FRP Columns FRP - jbmillworks.com
10 | 800 423 3311 โข www .turncraft .com
POLY-CLASSICยฎ FRP Columns FRP z LIMITED LIFETIME WARRANTY
z READY TO PRIME AND PAINT
z EXTERIOR OR INTERIOR USE
z MADE WITH FLAME GUARDโข
z STRONGEST COLUMN AVAILABLE
z LOW MAINTENANCE
z WIDE ARRAY OF OPTIONS
z CAN BE SPLIT FOR REASSEMBLY
10 | 800 423 3311
11 | 800 423 3311 โข www .turncraft .com
TRANSFORMING STRUCTURES WITH POLY-CLASSICยฎ FRP COLUMNS Turncraft Poly-Classicยฎ FRP Columns are the product of choice for homeowners and builders who demand beauty, value, and performance . Poly-Classicยฎ FRP Columns are architecturally proportioned from rotocast fiberglass-reinforced polymer โ the most advanced construction material in the world โ so pound for pound they are stronger than concrete, steel, or aluminum .
LIMITED LIFETIME WARRANTYPoly-Classicยฎ FRP Columns are virtually maintenance-free . They are impervious to termite and carpenter ant attack as well as staining and decaying fungi . High-humidity environments have no effect on these non-porous, waterproof columns . All Turncraft Poly-Classicยฎ Columns are covered by a limited lifetime warranty to the original purchaser . Warranty details are available from your distributor or our website-www .Turncraft .com .
NOW WITH FLAME GUARDโขPoly-Classicยฎ FRP Columns were the first fiberglass-reinforced polymer columns to achieve the distinction of passing an industry test (ASTME, 84-01) that measures the flame spread and smoke development of building components in a fire .
PLAN TYPESPoly-Classicยฎ FRP Columns are available in the plan types below . Please specify when you order . (Fractional components shown are typical . Customer may specify actual returns, wall thicknesses, etc .)
Poly-Classicยฎ
FRP Paneled Non-tapered Square
Poly-Classicยฎ
FRP Tuscan Tapered Round
Poly-Classicยฎ
FRP Fluted Non-tapered Square
Poly-Classicยฎ
FRP Unfluted Non-tapered Square
Poly-Classicยฎ
FRP Tuscan Tapered Fluted
Poly-Classicยฎ
FRP Tuscan Non-tapered Round
Poly-ClassicยฎFRP Recessed Paneled Non-tapered Square
Poly-ClassicยฎFRP Unfluted Non-tapered Square with Pedestal
Poly-Classicยฎ
FRP Tuscan Non-tapered Fluted
Turncraft Poly-Classicยฎ FRP Columns with Flame Guard set a new industry standard:
Flame Spread Index (FSI)
Smoke Developed Index (SDI)
Industry Standard for FRP Columns 70-85 900-1025
Turncraft Poly-Classicยฎ Columns 15* 335**
*Achieving Class I Flame-Spread classification under 1997 uniform fire code. **Well below the allowable SDI index of 450.
FRP
3/43/4
1/4
1/2
3/4 1/4
1/2
www .Turncraft .com 11 |
12 | 800 423 3311 โข www .turncraft .com
TIMESAVER RAILING ADAPTER BRACKETOur TimeSaver railing adapter bracket solves the age old problem of attaching a railing system to the decorative base of a round column . Simply use one of these new brackets to make an attractive attachment to our 8โ, 10โ, and 12โ round Tuscan bases . Brackets are available in two different heights, allowing them to be used with just about any railing system on the market .
SPLIT KITEach kit contains six nylon locking straps with 1/8โ spacers and one quart (1 .85 lb .) automotive body filler . For columns over 12 foot in height, two kits will be required per column . Turncraft recommends using an abrasive (Carborundum or similar) or carbide blade to trim the shaft . Split columns are not load bearing .
INSTALL KITFor structural FRP columns, the install kit consists of 4 ABS brackets (2 for top of column and 2 for bottom) and fasteners required for standard installation . We recommend 2 kits for columns 16" and up: this will allow the installer to use 4 brackets at the top and bottom of the column . When installed, the cap and base will conceal these brackets and hardware .
โข Made out of fiber-reinforced recycled ABS (acrylonitrile butadiene styrene)
โข Designed for use on round FRP columns in 8โ, 10โ, and 12โ sizes
โข Made with 95% recycled materialโข Extremely strong and durableโข Self aligning with no fastenersโข Excellent paint adhesionโข Fast installation
TURNCRAFT EXCLUSIVES PRODUCTS
INSTALLATION KITS AVAILABLE
FRP
NEW! COPPER OR ALUMINUM FLASHINGTurncraft is now offering real flashing for our most popular sizes of columns - the 8", 10", and 12" round and square Poly-Classicยฎ FRP columns with Tuscan caps . Flashing is available in either copper or aluminum . Flashing is 3/4" larger than abacus size, to be folded over the edges of the cap, held in place with construction adhesive (not supplied) . Flashing for other sizes and styles of caps are available . Call for more information .
Crimp edges of flashing over sides of cap. Secure in place with construction adhesive.
PressureTabs
TIMESAVER CAP AND BASENew to the Turncraft product line, our 8โ Square TimeSaver Cap and Base employs the same Quick-Fit installation pressure tabs as our round 8โ, 10โ, and 12โ TimeSaver products . Our TimeSaver cap and base offers the easiest and quickest installation in the industry .
Standard Brackets(Tall brackets are 2" taller than the standard bracket)
8โ
3.68
8โ
2.170โ
10โ
2.287โ
12โ
4.56
3โ
2.558โ
4.06
3โ
12 | 800 423 3311
13 | 800 423 3311 โข www .turncraft .com
Tapered Round FRP Shafts Available Heights and Load Capacities
Column Bottom
Diameter j5โ 6โ 8โ 9โ 10โ 12โ 14โ 16โ 18โ 20โ 22โ 24โ Concentric
Load โซEccentric Load โซ
6โ โ โ โ 6,000 lb. 6,000 lb.8โ โ โ โโ โโ โโ 10,000 lb. 6,600 lb.
10โ โ โ โโ โโ โโ โโ 14,000 lb. 10,720 lb.12โ โ โ โโ โโ โโ โโ โ โโ 18,000 lb. 13,200 lb.14โ โ โ โ โ โ โ โ โ 20,000 lb. 11,520 lb.16โ โ โ โ โ โ โ โ โ โ โ 20,000 lb. 13,200 lb.18โ โ โ โ โ โ โ โ โ โ โ 20,000 lb. 9,040 lb.20โ โ โ โ โ โ โ โ โ 20,000 lb. 18,960 lb.24โ โ โ โ โ โ โ โ โ โ 20,000 lb. 13,200 lb.30" Available in DuraGlass. Please see page 25. 25,000 lb. n/a
Non-Tapered Round Shafts Available Heights and Load Capacities
Column Bottom
Diameter *8โ 10โ 11โ 12โ 14โ 15โ Concentric
Load โซEccentric Load โซ
8โ โ โ 10,000 lb. 8,240 lb.10โ โ โ 14,000 lb. 11,520 lb.12โ โ โ โ 18,000 lb. 11,520 lb.14โ โ โ โ โ 20,000 lb. 18,120 lb.16โ โ โ 20,000 lb. 13,200 lb.18โ โ โ โ 20,000 lb. 9,040 lb.20โ โ โ โ 20,000 lb. 18,960 lb.24โ โ โ โ โ โ 20,000 lb. 13,200 lb.30" Available in DuraGlass. Please see page 25. 25,000 lb. n/a
Non-Tapered Square Shafts Available Heights and Load Capacities
Column Bottom Width
8โ 9โ 10โ 12โ 14โ 16โ Concentric Load โซ
Eccentric Load โซ
6โ โ โ 6,000 lb. 6,000 lb.8โ โโโโ โโโ โโโโ 10,000 lb. 10,000 lb.
10โ โโ โโ โโ โ 12,800 lb. 12,800 lb.12โ โ โ โ โ โ โ 18,000 lb. 17,320 lb.14โ โ โ โ โ โ โ 20,000 lb. 17,320 lb.16" Available in DuraGlass. Please see page 24. 20,000 lb. n/a
ROUND COLUMN SIZESRound tapered and non-tapered shafts are available fluted and unfluted in a wide range of sizes . Flutes in most 8โ, 10โ, and 12โ diameter tapered shafts are molded right into the shaft, providing consistent Ionic fluting . All sizes can also be custom-fluted for specific opening heights, and adjusted for the cap and base chosen . When shafts are custom fluted, typically the flutes end 1โ from the top of the base .
SQUARE COLUMN SIZESSquare non-tapered shafts are available unfluted, fluted, recessed panel, or with a double raised panel . In addition, custom fluting is available . The astragal is molded into the shaft for consistent spacing and simplified installation .
Column Shaft
Overhead Beam
ConcentricLoading
EccentricLoading
j Actual shaft width may be smaller than nominal size shown .โซ Load capacities are reduced when loads are not centered .
Full documentation regarding eccentric load capacities can be found online at Turncraft .com/pdf/EccentricLoad .pdf and Turncraft .com/pdf/LoadAddendum .pdf .
Please refer to the online documentation regarding maximum eccentricity (beam offset from center) and other specifications .
Column Shaft
Overhead Beam
ConcentricLoading
EccentricLoading
Square FRP ColumnTapered & Non-tapered Round FRP Column
AVAILABILITY
Non-tapered square 8", 10", and 12" columns are also available in DuraGlass.All Poly-Classicยฎ FRP Columns are available with custom fluting.โโโโ
FRP
Available unfluted.Available with standard flutes.Available raised panel.Available with recessed panel.
www .Turncraft .com 13 |
14 | 800 423 3311 โข www .turncraft .com
POLY-CLASSICยฎ FRP COLUMN ROUND TAPERED SHAFT SPECIFICATIONS FRP
Refer to page 13 for Concentric and Eccentric load capacities. j Diameters may vary ยฑ 1/8โ.โ Neck Height is the distance from the top of the shaft to the top of the astragal ring, ยฑ 1/8โ.โก Astragal ring is only the ring portion, and does not include the fillet and cove.
Columnnominaldiameter
Shaft height
Shaft bottom j
Shaft top j
Space available inside shaft
Shaft neck Flute
width (24 each)
Straight portion of shaft
(unfluted)
Straight portion of shaft (fluted)
Smooth shaft
before flutesOutside
diameterInside
diameterOutsidediameter
Inside diameter
For round post
For square
post
Neck height โ
Astragal ring โก
(A) (C) (D) (H) (I) (G) (F) (B) (B) (E)
6โ5โ
5 11โ16โ 4 3โ4โ 4 13โ16โ 3 3โ4โ 3 3โ8โ 2 1โ2โ 3โ 1โ2โ 1โ2โ23 1โ16โ
n/a n/a6โ 35 1โ16โ8โ 59 1โ16โ
8โ
5โ
7 5โ8โ 6 3โ4โ 6 19โ32โ 5 1โ2โ 5 1โ8โ 3 1โ2โ 4 1โ4โ 1โ2โ 11โ16โ
14 1โ16โ n/a n/a6โ 26 1โ16โ n/a n/a8โ 50 1โ16โ 50โ 9 3โ4โ9โ 62 1โ16โ 54โ 9 3โ4โ
10โ 72 1โ16โ 65โ 9 3โ4โ
10โ
4โ
9 11โ16โ 8 3โ8โ 8 9โ16โ 7 3โ4โ 7 3โ8โ 4 15โ16โ 5 1โ8โ 3โ4โ 7โ8โ
0 n/a n/a5โ 0 n/a n/a6โ 10 11โ16โ n/a n/a8โ 34 11โ16โ 39โ 10 1โ4โ9โ 46 11โ16โ 56โ 10 1โ4โ
10โ 58 11โ16โ 65โ 10 1โ2โ12โ 82 11โ16โ 89โ 10 1โ2โ
12โ
5โ
11 5โ8โ 10 3โ4โ 10 1โ16โ 9 1โ4โ 8 7โ8โ 6โ 4 3โ4โ 3โ4โ 1โ
0 n/a n/a6โ 8 3โ4โ n/a n/a8โ 32 3โ4โ 42 3โ4โ 11 1โ4โ9โ 44 3โ4โ 49โ 11 1โ4โ
10โ 56 3โ4โ 53โ 11 1โ4โ12โ 80 3โ4โ 60โ 11 3โ8โ14โ 62โ n/a n/a16โ 86โ 87โ 11 3โ8โ
14โ
8โ
13 1โ2โ 11 1โ2โ 11 9โ16โ 10 1โ2โ 10 1โ8โ 6 3โ8โ 6 3โ4โ 1โ 1 1โ4โ
33 1โ4โ9โ 45 1โ4โ
10โ 57 1โ4โ12โ 81 1โ4โ14โ 57 1โ4โ16โ 81 1โ4โ18โ 105 1โ4โ20โ 129 1โ4โ
16โ
5โ
15 7โ16โ 13 1โ2โ 13 1โ8โ 12โ 11 5โ8โ 7 7โ16โ 7 3โ8โ 1โ 1 7โ16โ
16 1โ4โ6โ 28 1โ4โ8โ 18 1โ2โ9โ 30 1โ2โ
10โ 42 1โ2โ12โ 66 1โ2โ14โ 27 1โ4โ16โ 51 1โ4โ18โ 75 1โ4โ20โ 99 1โ4โ
18โ
8โ
17 3โ8โ 15โ 14 5โ16โ 12 3โ4โ 12 3โ8โ 8 5โ16โ 7 7โ8โ 1โ 1 1โ2โ
13 3โ8โ9โ 25 3โ8โ
10โ 37 3โ8โ12โ 61 3โ8โ14โ 85 3โ8โ16โ 26 1โ8โ18โ 50 1โ8โ20โ 74 1โ8โ22โ 98 1โ8โ24โ 122 1โ8โ
20โ
6โ
19 3โ8โ 18โ 16 5โ16โ 14 7โ8โ 14 1โ2โ 10โ 9 3โ16โ 1 3โ8โ 1 11โ16โ
08โ 22 1โ4โ
10โ 46 1โ4โ12โ 70 1โ4โ14โ 40 3โ8โ16โ 64 3โ8โ18โ 88 3โ8โ20โ 112 3โ8โ
24โ
8โ
23 3โ8โ 22โ 19 5โ16โ 18โ 17 5โ8โ 12 3โ16โ 12โ 1 5โ8โ 2 1โ8โ
8โ10โ 32โ12โ 56โ14โ 24 13โ16โ16โ 48 13โ16โ18โ 72 13โ16โ20โ 96 13โ16โ22โ 120 13โ16โ24โ 144 13โ16โ
The โSpace Available Inside Shaftโ measurements are calculated at the top inside diameter (with ยฑ 3/8โ tolerance), when using Tuscan or Roman Doric caps. Fluted and DuraStoneโข columns will have reduced tolerances.
E
G
F
B
A
C
D
H
I
Top Diameter
Inside Round
Inside Square
Top Diameter
14 | 800 423 3311
15 | 800 423 3311 โข www .turncraft .com
All caps, bases, and ornamental capitals are manufactured of low-maintenance materials . Materials for caps and bases will vary based on size and style . Standard Tuscan caps and bases for our 8โ, 10โ, and 12โ diameter round tapered columns are our new TimeSaver ABS (recycled ABS with fiberglass reinforcement) . Since these are molded products, specifications shown are ยฑ 1/8โ, and subject to change without notice .
TUSCAN CAPS AND BASES FOR ROUND TAPERED FRP COLUMNS
ROMAN DORIC CAPS AND BASES FOR ROUND TAPERED FRP COLUMNS
OPTIONAL ATTIC BASES FOR ROUND FRP COLUMNS
BUILDERS SERIES CAPS AND BASES FOR ROUND TAPERED FRP COLUMNSโ Attic bases are FRP. Also available in DuraStoneโข.
Column diameter
Attic Base โ
Plinth Torus Total height
(A) (B) (C) (D) (E) (F) (B-F)6โ 8โ 1โ 3โ4โ 3โ4โ 1โ2โ 1โ2โ 3 1โ2โ8โ 10 7โ8โ 1 7โ8โ 1 1โ8โ 7โ8โ 3โ4โ 1โ2โ 5 1โ8โ
10โ 13 1โ2โ 2 3โ8โ 1 1โ4โ 1 1โ8โ 7โ8โ 5โ8โ 6 1โ4โ12โ 16 1โ8โ 2 3โ4โ 1 1โ2โ 1 3โ8โ 1โ 5โ8โ 7 1โ4โ14โ 18 1โ2โ 3 5โ16โ 1 3โ4โ 1 5โ8โ 1 1โ4โ 11โ16โ 8 21โ32โ16โ 21 3โ16โ 3 3โ4โ 2 1โ8โ 1 7โ8โ 1 1โ2โ 13โ16โ 10 1โ8โ18โ 23 15โ16โ 4 1โ4โ 2 5โ16โ 2 1โ8โ 1 7โ16โ 1 1โ8โ 11 1โ4โ20โ 27 1โ16โ 4 3/4โ 2 11โ16โ 2 3โ8โ 1 3โ4โ 1 7โ16โ 13โ24โ 32 1โ2โ 5 3/4โ 3 5โ16โ 2 13โ16โ 2 1โ8โ 1 3โ4โ 15 3โ4โ
โ Cap and base are polystyrene (with foam core). Not available in DuraStoneโข.
Column diameter
Builders Series Base โ Builders Series Cap โ
Plinth Torus Total height Echinus Abacus Total
height(A) (B) (C) (D) (B-D) (E) (F) (G) (E-F)
8โ 10 7โ8โ 1 7โ8โ 1 1โ4โ 5โ8โ 3 3โ4โ 1 1โ4โ 1 1โ4โ 9 7โ16โ 2 1โ2โ10โ 13 1โ2โ 2 3โ8โ 1 5โ8โ 9โ16โ 4 9โ16โ 1 13โ16โ 1 3โ4โ 12 3โ16โ 3 9โ16โ12โ 16 1โ4โ 2 3โ4โ 2โ 7โ8โ 5 5โ8โ 1 7โ8โ 2โ 14 5โ8โ 3 7โ8โ
โ A-ABS TimeSaver, F-FRP, D-Durastoneโข, P-Polyurethane cap with FRP base; standard material is underlined
Column diameter
Tuscan Base Tuscan CapMaterials available โ Plinth Torus Total
height Echinus Abacus Total height
(A) (B) (C) (D) (B-D) (E) (F) (G) (E-F)6โ 8โ 1 1โ2โ 1 1โ4โ 1โ2โ 3 1โ4โ 1โ 1 1โ16โ 7 1โ2โ 2 1โ16โ P, D8โ 10 7โ8โ 1 7โ8โ 1 3โ4โ 5โ8โ 4 1โ4โ 1 5โ16โ 1 3โ8โ 9 7โ8โ 2 11โ16โ A, F, D, P
10โ 13 1โ2โ 2 3โ8โ 2 1โ8โ 3โ4โ 5 1โ4โ 1 13โ16โ 1 3โ4โ 12 1โ8โ 3 9โ16โ A, F, D, P12โ 16 1โ4โ 2 3โ4โ 2 3โ8โ 7โ8โ 6โ 1 7โ8โ 2โ 14 5โ8โ 3 7โ8โ A, F, D, P14โ 18 5โ8โ 3 5โ16โ 3โ 1โ 7 5โ16โ 2 1โ2โ 2 5โ16โ 17โ 4 15โ16โ P, D16โ 21 5โ16โ 3 7โ8โ 3 3โ8โ 1 1โ8โ 8 5โ16โ 2 3โ4โ 2 11โ16โ 19 1โ8โ 5 7โ16โ P, D18โ 24โ 4 3โ16โ 4โ 1 3โ8โ 9 9โ16โ 3โ 2 15โ16โ 21 5โ16โ 5 15โ16โ P, D20โ 27โ 4 3โ4โ 4 1โ16โ 1 3โ4โ 10 9โ16โ 3 1โ8โ 3 7โ16โ 24 1โ4โ 6 9โ16โ P, D24โ 32 1โ2โ 5 3โ4โ 5 1โ4โ 2 1โ4โ 13 1โ4โ 3 5โ16โ 4 1โ8โ 28 3โ4โ 7 7โ16โ P, D
โ Bases are FRP, caps are polyurethane. Only the bases are available in DuraStoneโข-not the caps.
Column diameter
Roman Doric Base โ Roman Doric Cap โ
Plinth Torus Total height Echinus Abacus Total
height(A) (B) (C) (D) B-D) (E) (F) (G) (E-F)
6โ 7 31โ32โ 1 1โ2โ 1โ 3โ4โ 3 1โ4โ 1โ 1 1โ4โ 8โ 2 1โ4โ8โ 10 7โ8โ 1 7โ8โ 1 7โ16โ 15โ16โ 4 1โ4โ 1 7โ16โ 1 1โ2โ 10 1โ4โ 2 15โ16โ
10โ 13 1โ2โ 2 3โ8โ 1 3โ4โ 1 1โ4โ 5 3โ8โ 1 7โ8โ 1 3โ4โ 13โ 3 5โ8โ12โ 16 1โ8โ 2 3โ4โ 2 1โ16โ 1 3โ8โ 6 3โ16โ 2 1โ8โ 2 3โ8โ 15 1โ8โ 4 1โ2โ14โ 18 3โ4โ 3 3โ8โ 2 3โ8โ 1 5โ8โ 7 3โ8โ 2 11โ16โ 2 3โ4โ 17 13โ16โ 5 9โ16โ16โ 21 1โ2โ 3 7โ8โ 2 7โ8โ 2โ 8 3โ4โ 3 3โ16โ 3 1โ8โ 20 5โ16โ 6 5โ16โ18โ 24โ 4 1โ8โ 3 5โ16โ 2 3โ8โ 9 13โ16โ 3 1โ2โ 3 9โ16โ 22 7โ16โ 7 1โ16โ
FRP
EF
BC
D
A
EF
G
BC
D
A
EF
G
B
CD
A
EF
G
B
CD
A
www .Turncraft .com 15 |
16 | 800 423 3311 โข www .turncraft .com
Standard FRP column shafts are the same height as the listed size . Tuscan caps and bases and Attic bases go around the shaft, and do not affect the overall height . Ornamental capitals are not typically available for non-tapered round shafts .
โ Attic bases are FRP. Also available in DuraStoneโข.
Column diameter
Attic Base โ
Plinth Torus Total height
(A) (B) (C) (D) (E) (F) (B-F)6โ 8โ 1โ 3โ4โ 3โ4โ 1โ2โ 1โ2โ 3 1โ2โ8โ 10 7โ8โ 1 7โ8โ 1 1โ8โ 7โ8โ 3โ4โ 1โ2โ 5 1โ8โ
10โ 13 1โ2โ 2 3โ8โ 1 1โ4โ 1 1โ8โ 7โ8โ 5โ8โ 6 1โ4โ12โ 16 1โ8โ 2 3โ4โ 1 1โ2โ 1 3โ8โ 1โ 5โ8โ 7 1โ4โ14โ 18 1โ2โ 3 5โ16โ 1 3โ4โ 1 5โ8โ 1 1โ4โ 11โ16โ 8 5โ8โ16โ 21 3โ16โ 3 3โ4โ 2 1โ8โ 1 7โ8โ 1 1โ2โ 13โ16โ 10 1โ8โ18โ 23 15โ16โ 4 1โ4โ 2 5โ16โ 2 1โ8โ 1 7โ16โ 1 1โ8โ 11 1โ4โ20โ 27 1โ16โ 4 3โ4โ 2 11โ16โ 2 3โ8โ 1 3โ4โ 1 7โ16โ 13โ24โ 32 1โ2โ 5 3โ4โ 3 5โ16โ 2 13โ16โ 2 1โ8โ 1 3โ4โ 15 3โ4โ
โ A-ABS, F-FRP, D-Durastoneโข, P-Polyurethane; standard material is underlined.
Column diameter
Tuscan Base Tuscan Cap
Plinth Torus Total height Materials
available โ Echinus Abacus Total
height Materials available โ (A) (B) (C) (D) (B-D) (E) (F) (G) (E-F)
8โ 10 7โ8โ 1 7โ8โ 1 3โ4โ 5โ8โ 4 1โ4โ A, F, D 1 13โ16โ 1 3โ4โ 12 1โ8โ 3 9โ16โ P, D10โ 13 1โ2โ 2 3โ8โ 2 1โ8โ 3โ4โ 5 1โ4โ A, F, D 1 7โ8โ 2โ 14 5โ8โ 3 7โ8โ P, D12โ 16 1โ4โ 2 3โ4โ 2 3โ8โ 7โ8โ 6โ A, F, D 2 1โ2โ 2 5โ16โ 17โ 4 13โ16โ P, D14โ 18 5โ8โ 3 5โ16โ 3โ 1โ 7 5โ16โ F, D 2 3โ4โ 2 11โ16โ 19 1โ8โ 5 7โ16โ P, D16โ 21 5โ16โ 3 7โ8โ 3 3โ8โ 1 1โ8โ 8 5โ16โ F, D 3โ 2 15โ16โ 21 5โ16โ 5 15โ16โ P, D18โ 24โ 4 3โ16โ 4โ 1 3โ8โ 9 9โ16โ F, D 3 1โ8โ 3 7โ16โ 24 1โ4โ 6 9โ16โ P, D20โ 27โ 4 3โ4โ 4 1โ16โ 1 3โ4โ 10 9โ16โ F, D 3 3โ16โ 4 1โ8โ 28 3โ4โ 7 5โ16โ P, D24โ 32 1โ2โ 5 3โ4โ 5 1โ4โ 2 1โ4โ 13 1โ4โ F, D 3 5โ16โ 4 1โ8โ 32 1โ2โ 7 7โ16โ P, D
The โSpace Available Inside Shaftโ measurements are calculated at the top inside diameter (with ยฑ 3/8โ tolerance) when using Tuscan or Roman Doric caps . Fluted and DuraStoneโข columns may have reduced tolerances .
POLY-CLASSICยฎ SHAFTS FOR ROUND NON-TAPERED FRP COLUMNS
TUSCAN CAPS AND BASES FOR ROUND NON-TAPERED COLUMNS
OPTIONAL ATTIC BASES FOR ROUND FRP COLUMNS
FRP
EF
BC
D
A
EF
G
B
CD
A
A
B
C
B
B
C
B
Inside Square
Top DiameterTop Diameter
Inside Round
Columnnominaldiameter
Shaft height
Shaft diameters j Space available inside shaftFlute width
(24 each)Concentric
LoadEccentric
LoadOutsidediameter
Inside diameter For round
postFor square
post(A) (B) (C)
8โ 8โ 7 5โ8โ 6 3โ4โ 6 3โ8โ 4 1โ2โ 11โ16โ 10,000 lb. 6,600 lb.10โ
10โ 8โ 9 11โ16โ 8 3โ8โ 8โ 5 5โ8โ 7โ8โ 14,000 lb. 10,720 lb.10โ
12โ8โ
11 5โ8โ 10 3โ4โ 10 3โ8โ 7 5โ16โ 1โ 18,000 lb. 13,200 lb.10โ12โ
14โ
8โ
13 1โ2โ 11 1โ2โ 11 1โ8โ 7 7โ8โ 1 5โ16โ 20,000 lb. 11,520 lb.10โ12โ14โ
16โ 8โ 15 7โ16โ 13 1โ2โ 13โ 9 3 โ16โ 1 1โ2โ 20,000 lb. 13,200 lb.10โ
18โ8โ
17 3โ8โ 15โ 14 1 โ2โ 10 1 โ4โ 1 11โ16โ 20,000 lb. 9,040 lb.10โ11โ
20โ8โ
19 3โ8โ 18โ 16 1 โ2โ 11 5 โ8โ 1 7โ8โ 20,000 lb. 18,960 lb.10โ11โ
24โ
8โ
23 3/8โ 21 1/4โ(top ID) 19 1โ2โ 13 3โ4โ 2 5/16โ 20,000 lb. 13,200 lb.
10โ12โ14โ15โ
j Diameters may vary ยฑ 1/8โ.
16 | 800 423 3311
17 | 800 423 3311 โข www .turncraft .com
Column nominal
width
Column shaft Shaft neck Flute width
20 each
Space available
inside shaft j
Heights available
Outside width
Inside width j
Neck height โ
Astragal ring โก
(B) (C) (E) (D)6โ 5 7โ8โ 4 3โ4โ 3 5โ8โ 3โ4โ 1โ2โ 4 1โ2โ 8'8โ 7 7โ8โ 5 3โ4โ 4 1โ2โ 3โ4โ 11โ16โ 5 1โ2โ 8', 9', 10'
10โ 9 7โ8โ 8 3โ4โ 5 1โ16โ 3โ4โ 7โ8โ 8 1โ2โ 8', 9', 10', 12'12โ 11 7โ8โ 10 3โ4โ 4 1โ2โ 3โ4โ 1โ 10 1โ2โ 8', 9', 10', 12', 14', 16'14โ 13 7โ8โ 12 3โ4โ 7โ 1โ 1 1โ4โ 12 1โ2โ 8', 9', 10', 12', 14', 16'
8โ Fluted column (stock)
Bottom of shaft before flutes
Flute length
(F) (G)8โ 10 15โ16โ 77 13โ16โ9โ 10 15โ16โ 89 13โ16โ
10โ 22 15โ16โ 89 13โ16โ
8โ Raised panel
columns
Bottom of shaft before panel
Bottom panel height
Top panel height
(H) (I) (J)8โ 9 5โ8โ 22 15โ16โ 45 7โ8โ9โ 9 5โ8โ 26 15โ16โ 53 7โ8โ
10โ 21 5โ8โ 26 15โ16โ 53 7โ8โ
Standard FRP column shafts are the same height as the listed size . Tuscan caps and bases, and the pedestal base go around the shaft, and do not affect the overall height . Ornamental capitals are set on top of the shaft (after the shaft is trimmed to the correct position), and will affect the overall height: see the Ornamental Capitals for Square Columns specifications for more information .
Column width
Tuscan Base โ Tuscan Cap โ Plinth Torus Total height Echinus Abacus Total height
(A) (B) (C) (D) (B-D) (E) (F) (G) (E-F)6โ 8โ 1 1โ2โ 1 1โ4โ 1โ2โ 3 1โ4โ 1โ 1 1โ16โ 8 7โ16โ 2 1โ16โ8โ 11 3โ8โ 1 7โ8โ 1 3โ4โ 5โ8โ 4 1โ4โ 1 5โ16โ 1 7โ16โ 11 1โ4โ 2 3โ4โ
10โ 13 1โ2โ 2 3โ8โ 2 1โ8โ 3โ4โ 5 1โ4โ 1 13โ16โ 1 3โ4โ 13 1โ4โ 3 9โ16โ12โ 17โ 2 3โ4โ 2 3โ8โ 7โ8โ 6โ 1 7โ8โ 2โ 17 1โ4โ 3 7โ8โ14โ 18 13โ16โ 3 3โ8โ 2 15โ16โ 1 1โ16โ 7 3โ8โ 2 1โ2โ 2 5โ16โ 18 11โ16โ 4 13โ16โ
โ 14โ bases are FRP, other cap and base are polyurethane. Also available in DuraStoneโข.
j For 8โ size, stock fluted shaft value is shown. Paneled and plain shafts are typically 1/2โ to 1โ greater.โ Neck Height is the distance from the top of the shaft to the top of the astragal ring (ยฑ1/8โ).โก Astragal ring is only the ring portion, and does not include the fillet and cove.
Recessed panel columns
Base to panel j
Panel height
Panel to top height
Panel width
(K) (L) (M) (N)8โ x 8โ 11 3โ8โ 76 3โ4โ 7 5โ8โ 4 7โ8โ8โ x 9โ 11 3โ8โ 88 3โ4โ 7 5โ8โ 4 7โ8โ
8โ x 10โ 11 3โ8โ 100 3โ4โ 7 5โ8โ 4 7โ8โ10โ x 8โ 14 1โ2โ 73 11โ16โ 8 3โ16โ 6 7โ8โ10โ x 9โ 14 1โ2โ 85 11โ16โ 8 3โ16โ 6 7โ8โ
10โ x 10โ 14 1โ2โ 97 11โ16โ 8 3โ16โ 6 7โ8โ
The โSpace Available Inside Shaftโ measurements are calculated at the top inside diameter (with ยฑ 1/4โ tolerance). Inside widths may vary. Ornamental capitals will reduce the inside widths.
Inside Round
Inside Square
POLY-CLASSICยฎ SQUARE SHAFTS FOR NON-TAPERED FRP COLUMNS
TUSCAN CAPS AND BASES FOR SQUARE NON-TAPERED FRP COLUMNS
Column width
Pedestal Base โ Bottom width
Total height Bottom Center Platform Top Top
width(A) (B) (C) (D) (E) (F) (G)
8โ 15โ 42 3โ8โ 8 11โ16โ 25 7โ8โ 2 1โ8โ 5 11โ16โ 8 1โ4โโ Pedestal bases are FRP. Also available in DuraStoneโข. Use with Tuscan cap (above) or Ornamental Capitals.
PEDESTAL BASE FOR SQUARE NON-TAPERED FRP COLUMNS
Column width
Attic Base โ Plinth Torus Total height
(A) (B) (C) (D) (E) (F) (B-F)6โ 8โ 1โ 3โ4โ 3โ4โ 1โ2โ 1โ2โ 3 1โ2โ8โ 10 7โ8โ 1 7โ8โ 1 1โ8โ 7โ8โ 3โ4โ 1โ2โ 5 1โ8โ
10โ 13 1โ2โ 2 3โ8โ 1 1โ4โ 1 1โ8โ 7โ8โ 5โ8โ 6 1โ4โ12โ 17โ 2 3โ4โ 1 1โ2โ 1 3โ8โ 1โ 5โ8โ 7 1โ4โ14โ 18 1โ2โ 3 5โ16โ 1 3โ4โ 1 5โ8โ 1 1โ4โ 11โ16โ 8 5โ8โ
โ Attic bases are FRP. Also available in DuraStoneโข
OPTIONAL ATTIC BASES FOR SQUARE FRP COLUMNS
FRP
EF
G
BC
D
A
EF
BC
D
A
G
F
A
E
D
C
BK
L
M
N
J
6"
I
H
7 5/8โ 1 9/16โ
4 7/8โ
E
F
B
C
D
A
G
Refer to page 13 for Concentric and Eccentric load capacities.
www .Turncraft .com 17 |
18 | 800 423 3311 โข www .turncraft .com
Shaft nominal bottom
diameter
Empire Empire with Necking Greek Angular Ionic Greek ErectheumCapital height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Scrollwidth
Height adjust j
6โ 3 1โ8โ 9โ 8 3โ4โ -1โ 6 7โ8โ 9โ 8 3โ4โ +3 1โ4โ 3 5โ8โ 9 1โ4โ 9โ -1โ2โ 3 1โ4โ 6 3โ4โ 8 1โ2โ -7โ8โ8โ 3 3โ4โ 10โ 9โ -1โ 7 3โ4โ 10โ 9โ +3 1โ2โ 3 3โ4โ 9 1โ2โ 9โ -1โ 3 3โ4โ 7 3โ4โ 11 3โ4โ -1โ
10โ 5 1โ2โ 16โ 13 1โ2โ -3โ8โ 10โ 13 1โ2โ 12 1โ4โ +4 7โ8โ 5 3โ8โ 14 1โ4โ 13 1โ4โ -1โ2โ 5 1โ2โ 12โ 17 1โ2โ -3โ8โ12โ 6 1โ4โ 18โ 17โ +3โ4โ 11โ 18โ 17โ +6 1โ4โ 6โ 17 1โ4โ 17โ +1โ2โ 6 1โ4โ 14 1โ2โ 21โ +3โ4โ14โ 7 1โ4โ 20 1โ4โ 19 1โ2โ -3โ4โ 14 1โ2โ 20 1โ2โ 19 1โ2โ +7 1โ2โ 7 1โ4โ 20 3โ4โ 19 1โ4โ -3โ4โ 7โ 15โ 21โ -1โ 16โ 8 3โ4โ 23โ 19 1โ2โ +5โ8โ 17โ 23โ 19 1โ2โ +9 7โ8โ 8 3โ8โ 20 1โ2โ 19 1โ2โ +1โ4โ 9โ 17 1โ2โ 26โ +7โ8โ 18โ 10โ 32โ 26 1โ4โ +3โ4โ 15โ 32โ 26 1โ4โ +6 3โ4โ 9 3โ4โ 24 1โ4โ 19 3โ4โ +1โ2โ 10 1โ2โ 22โ 29โ +1 1โ4โ20โ 11 1โ4โ 34โ 28โ +1 1โ8โ 17 1โ4โ 34โ 28โ +8 1โ2โ 11โ 29 3โ4โ 28โ +7โ8โ 11โ 26โ 36โ +7โ8โ24โ 12 3โ4โ 35 1โ2โ 35โ -1 1โ8โ 19โ 35 1โ2โ 35โ +6 3โ4โ 12 3โ4โ 35โ 34 1โ2โ -1 1โ8โ 13โ 30 1โ2โ 43โ -7โ8โ30โ n/a n/a n/a 15โ 31โ 45 1โ2โ
Shaft nominal bottom
diameter
Greek Erectheum with Necking Modern Composite Roman Corinthian Roman Doric OrnamentalCapital Height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Height adjust j
Capital height
Abacus width
Height adjust j
Capital height
Abacus width
Scrollwidth
Height adjust j
6โ 5 3โ4โ 7 3โ4โ 11 3โ4โ +2 1โ8โ 7โ 8โ +3 3โ8โ 7โ 9 1โ2โ +3 3โ8โ 4โ 8 3โ4โ n/a +1โ8โ 8โ 7 1โ2โ 10 1โ2โ 15โ +3 1โ4โ 8 1โ2โ 10 3โ4โ +4 1โ4โ 10 1โ4โ 12 3โ4โ +6โ 6โ 13 1โ8โ n/a +1 1โ4โ
10โ 8 1โ2โ 12โ 17 1โ4โ +3 3โ8โ 12 1โ4โ 16 1โ2โ +7 1โ8โ 13 7โ8โ 17 3โ4โ +8 3โ4โ 7โ 16 1โ4โ n/a +1 1โ8โ12โ 9 1โ2โ 14 1โ2โ 21โ +4 3โ4โ 14 1โ2โ 19โ +9 3โ4โ 15 1โ2โ 18 1โ2โ +10 3โ4โ 7โ 16 1โ4โ n/a +1 1โ2โ14โ 11 1โ4โ 15โ 21โ +4 1โ4โ 17โ 20โ +10โ 17โ 22โ +10โ 9โ 21โ n/a +1 1โ4โ 16โ 13 1โ2โ 17 1โ2โ 26โ +6 3โ8โ n/a 20โ 27โ +12 7โ8โ 10 1โ2โ 24โ n/a +2 1โ8โ 18โ 15โ 22 1โ2โ 29โ +6 3โ4โ 22 1โ2โ 25โ +14 1โ4โ 23โ 32 1โ2โ +14 3โ4โ 12 1โ2โ 28โ n/a +3 5โ8โ20โ 17โ 26โ 36โ +8 1โ4โ 22 1โ2โ 25โ +13 3โ4โ 25 1โ2โ 39โ +16 3โ4โ 12 1โ2โ 28โ 24โ +2 3โ8โ24โ 19โ 30 1โ2โ 43โ +6 3โ4โ n/a 28 1โ2โ 42โ +16 1โ4โ n/a30โ 24 3โ4โ 31โ 45 1โ2โ n/a 37 1โ2โ 46 1โ2โ n/a n/a
Shaft nominal bottom
diameter
Roman Ionic Scamozzi Temple of WindsCapital height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Height adjust j
6โ 2 1โ4โ 6 1โ8โ 8 1โ16โ -1 7โ8โ 2 5โ8โ 7 3โ4โ 6 1โ4โ -1 1โ2โ 7โ 8โ +3 3โ8โ8โ 3โ 8 1โ4โ 10 1โ2โ -1 3โ4โ 3โ 10 1โ4โ 9โ -1 3โ4โ 8โ 12โ +3 3โ4โ
10โ 3 5โ8โ 11โ 13 5โ8โ -2 1โ4โ 3 7โ8โ 14 1โ2โ 12 1โ2โ -2โ 11 1โ8โ 15 1โ4โ +6โ12โ 4 1โ2โ 12 1โ2โ 16 1โ2โ -1โ 4 7โ8โ 16 3โ4โ 14โ -5โ8โ 13 3โ4โ 17โ +9โ14โ 5 1โ2โ 17 1โ2โ 23โ -2 1โ2โ 5 1โ2โ 19โ 16 3โ4โ -2 1โ2โ 14โ 21 1โ4โ +7โ16โ 6 1โ8โ 17 1โ2โ 22โ -2โ 6 1โ4โ 22 1โ4โ 18 1โ2โ -1 7โ8โ 16โ 23โ +8 7โ8โ18โ 6 1โ2โ 20โ 24 1โ4โ -2 3โ4โ 7โ 23 1โ2โ 23โ -2 1โ4โ 18 1โ8โ 26 3โ4โ +9 7โ8โ20โ 8 3โ4โ 25โ 31 3โ4โ -1 3โ8โ 8 3โ4โ 26โ 21 1โ2โ -1 3โ8โ 21 1โ4โ 28โ +12 1โ2โ24โ 9โ 25 1โ4โ 33โ -4 7โ8โ 10 1โ4โ 34 1โ4โ 29 1โ2โ -3 5โ8โ 23 1โ4โ 34 1โ4โ +11โ30โ 12 1โ2โ 32โ 40 1โ2โ 12 3โ4โ 39โ 33โ 30โ 39โ n/a
Note: All Capitals are Poly/Resin.j Height Adjust is based on trimming the shaft at the architecturally correct location.
Our standard round capitals install on top of the column and are set on the fillet or the neckring . All of these capitals are structural and will meet the columns' stated load capacities when properly installed .
For Empire with Necking, Greek Erectheum with Necking, Modern Composite, Roman Corinthian, and Temple of Winds capitals, trim at this point:
For all other capital styles, trim at this point:
CAPITALS FOR FRP ROUND TAPERED COLUMNS FRP
Empire Empirewith Necking
Greek Angular Ionic
Roman Corinthian Roman Doric Ornamental
Roman Ionic
Greek Erectheum Greek Erectheum with Necking
Modern Composite
Scamozzi Temple of Winds
18 | 800 423 3311
19 | 800 423 3311 โข www .turncraft .com
j Height Adjust is based on trimming the shaft at the architecturally correct location.
Shaft nominal bottom
diameter
Modern Composite Roman Corinthian Roman Doric Ornamental Roman Ionic Scamozzi Temple of Winds
Capital height
Abacus width
Height adjustj
Capital height
Abacus width
Height adjustj
Capital height
Abacus width
Height adjustj
Capital height
Abacus width
Scrollwidth
Height adjustj
Capital height
Abacus width
Scrollwidth
Height adjustj
Capital height
Abacus width
Height adjustj
6โ 8 1โ2โ 10 3โ4โ +4 7โ8โ 8 1โ2โ 12โ +4 7โ8โ 4 1โ2โ 10 1โ2โ +5โ8โ 3โ 8 1โ4โ 10 1โ2โ -7โ8โ 3โ 10 1โ4โ 9โ -7โ8โ 7 1โ2โ 10 1โ2โ +3 7โ8โ8โ 11 1โ2โ 16 1โ2โ +7โ 11 1โ2โ 15โ +7โ 6โ 14 1โ4โ +7โ8โ 3 5โ8โ 10 1โ2โ 13 1โ2โ -1 1โ2โ 3 7โ8โ 14 1โ2โ 12 1โ2โ -1 1โ4โ 10โ 13 7โ8โ +5 1โ2โ
10โ 14 1โ2โ 19โ +9 7โ16โ 14 1โ2โ 18 1โ2โ +9 7โ16โ n/a 4 1โ2โ 12 1โ2โ 16 1โ2โ -1 3โ8โ 4 7โ8โ 16 3โ4โ 14โ -1โ 11 5โ8โ 16 7โ8โ +6 9โ16โ12โ 17โ 20โ +12 1โ2โ 17โ 22โ +12 1โ2โ 9โ 21โ +2 3โ4โ 5 1โ2โ 17 1โ2โ 23โ -3โ4โ 5 1โ2โ 19โ 19 3โ4โ -3โ4โ 14โ 21 1โ4โ +9 1โ2โ14โ 22 1โ2โ 25โ +15 1โ2โ 20โ 27โ +13โ 10 1โ2โ 24โ +2 7โ16โ n/a 6 1โ4โ 22 1โ4โ 18 1โ2โ -1 13 โ16โ 16โ 23โ +9โ
Shaft nominal bottom
diameter
Empire Empire with Necking Greek Angular Ionic Greek Erectheum Greek Erectheum with Necking
Capital height
Abacus width
Scrollwidth
Height adjustj
Capital height
Abacus width
Scrollwidth
Height adjustj
Capital height
Abacus width
Scrollwidth
Height adjustj
Capital height
Abacus width
Scrollwidth
Height adjustj
Capital height
Abacus width
Scrollwidth
Height adjustj
6โ n/a 7 3โ4โ 10โ 9โ +4 1โ8โ n/a 3 3โ4โ 7 3โ4โ 11 3โ4โ -1โ8โ 5 3โ4โ 7 3โ4โ 11 3โ4โ +2 1โ8โ8โ 5 1โ4โ 13 1โ2โ 12 1โ4โ +1โ8โ 10โ 13 1โ2โ 12 1โ4โ +5 1โ2โ 5 1โ8โ 14 1โ4โ 13 3โ4โ 0โ 5 1โ4โ 10 1โ2โ 15โ +1โ8โ 7 1โ2โ 10 1โ2โ 15โ +3โ
10โ 6 1โ4โ 18โ 17โ +3โ8โ 11โ 18โ 17โ +5 15โ16โ 6โ 17 1โ4โ 17โ +1โ8โ 6 1โ4โ 14 1โ2โ 21โ +3โ8โ 9 1โ2โ 14 1โ2โ 21โ +4 7โ16โ12โ 7 1โ4โ 20 1โ4โ 19 1โ2โ +1โ 14 1โ4โ 20 1โ2โ 19 1โ2โ +9 3โ4โ 7 1โ4โ 20 3โ4โ 19 1โ4โ +1โ 7โ 15โ 21โ +2 1โ2โ 11 1โ4โ 15โ 21โ +6 3โ4โ14โ 8 3โ4โ 23โ 19 1โ2โ +11โ16โ 17โ 23โ 19 1โ2โ +10โ 8 3โ8โ 20 1โ2โ 19 1โ2โ +5 โ16โ 9โ 17 1โ2โ 26โ +15 โ16โ 13 1โ2โ 17 1โ2โ 26โ +6 1โ2โ
Shaft nominal bottom
diameter
Roman Corinthian ScamozziCapital height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Scrollwidth
Height adjust j
6โ 8 11โ16โ 11โ n/a +5 11โ16โ 2 7โ16โ 8 5โ8โ 8 1โ2โ -7โ16โ8โ 11 5โ16โ 14 5โ16โ n/a +7 1โ16โ 3โ 11โ 10 13โ16โ -1 1โ8โ
10โ 14 3โ16โ 18 1โ8โ n/a +9 1โ16โ 4 1โ8โ 14 1โ2โ 14 3โ8โ -7โ8โ12โ 17โ 21 3โ4โ n/a +12 1โ4โ 4 13โ16โ 17โ 16 3โ8โ +1โ16โ
Our Poly-Classicยฎ FRP Quick-Fit Capitals are designed for simple installation . These capitals will slide right over the top of the shaft and will sit on the neckring .
Square Capitals install on top of the column and are set on the fillet or the neckring . All of these capitals are structural and will meet the columns' stated load capacities when properly installed .
QUICK-FIT CAPITALS FOR ROUND TAPERED FRP COLUMNS
ORNAMENTAL CAPS FOR SQUARE NON-TAPERED FRP COLUMNS
Shaft nominal bottom
diameter
Greek Erectheum Roman IonicCapital height
Abacus width
Scrollwidth
Height adjust j
Capital height
Abacus width
Scrollwidth
Height adjust j
6โ 3 1โ4โ 6 9โ16โ 8 3โ8โ +3โ8โ 2 3โ16โ 6โ 8โ -11โ16โ
j Height Adjust is based on trimming the shaft at the architecturally correct location.
FRP
Empire Empirewith Necking
Greek Angular Ionic
Roman Corinthian Roman Doric Ornamental
Roman Ionic
Greek Erectheum Greek Erectheum with Necking
Modern Composite
Scamozzi Temple of Winds
Roman CorinthianRoman IonicGreek Erectheum Scamozzi
www .Turncraft .com 19 |