Front View - Lutz-JESCO America · 1" SSV SS/Viton® * Stainless Steel Viton® LJSV-B1 *Ex II 2G...
Transcript of Front View - Lutz-JESCO America · 1" SSV SS/Viton® * Stainless Steel Viton® LJSV-B1 *Ex II 2G...
Air O
pera
ted
Dia
phra
gm P
umps
A
IRTR
AN
1” Bolted Version (metallic)
8.4” (213mm)
1.5” (38mm)
9.1” (231mm)
8.4” (213mm)
12.4”(315mm)
9.1” (231mm)
1/4”-18 FNPT
13.0” (330mm)
1.3”(33mm)
11.6”(295mm)
7.5”(191mm)
6.9” (175mm)
13.0” (330mm)
1.3”(33mm)
11.6”(295mm)
7.5”(191mm)
6.9” (175mm)
1/4”-18 FNPT (Air Inlet)
Side View
Front View
Dimensions in inches (mm).
Rev. 6
55 Bermar Park Phone: 585-426-0990 E-Mail: [email protected] Toll Free: Rochester, NY 14624 USA Fax: 585-426-4025 http://www.lutzjescoamerica.com 1-800-554-2762
Lutz-JESCO America Corp.
Air O
pera
ted
Dia
phra
gm P
umps
A
IRTR
AN
Material descriptionGeolast® = NBR/PP compound Kynar® = PVDF = Polyvinylidenfluoride Nylon = PA = Polyamide-compound Polypropylene = PP Santoprene® = EPDM/PP-compound Teflon® = PTFE = Polytetrafluorethylene
PERFORMANCE CURVESPerformance Specifications
Max. Flow: 48 gpm (182 lpm)Max. Air Pressure: 120 psi (8.3 bar)Max. Solids: 1/4” (6.4 mm)Max. Suction Lift Dry: 17 ft-H2O (5.2 m-H2O)Max. Suction Lift Wet: 30 ft-H2O (9.1 m-H2O)Weight: AL-18 lbs (8 kg) / SS-38 lbs (17 kg)Air Inlet: 1/4” FNPTLiquid Inlet: 1” FNPT or 1” FBSPTLiquid Outlet: 1” FNPT or 1” FBSPTHeight: 12.4” (315 mm)Width: 13.0” (330 mm)Depth: 8.4” (213 mm)
epyTnoitcurtsnocfoslairetaM
.oNtraPgnisuoH evlaV,mgarhpaiD
slaeS,sllaB
tsaloeG/ulABLA"1 ® * munimulA tsaloeG ® 1B-GAJL
enerpotnaS/ulAELA"1 ® * munimulA enerpotnaS ® 1B-EAJL
nolfeT/ulATLA"1 ® * munimulA nolfeT ® 1B-TAJL
notiV/ulAVLA"1 ® * munimulA notiV ® 1B-VAJL
tsaloeG/SSBSS"1 ® * leetSsselniatS tsaloeG ® 1B-GSJL
enerpotnaS/SSESS"1 ® * leetSsselniatS enerpotnaS ® 1B-ESJL
nolfeT/SSTSS"1 ® * leetSsselniatS nolfeT ® 1B-TSJL
notiV/SSVSS"1 ® * leetSsselniatS notiV ® 1B-VSJL
4TCG2IIxE*
Typical applicationDrum and small tank transfer, pickling solutions, chem-ical feed
Teflon® and Viton® are registered Trademarks of DuPont Company. Kynar® is a registered Trademark of Penwalt Corp. Santoprene® is a registered Trademark of Monsanto Company. Geolast® is a registered Trademark of Advanced Elastomer Systems.