Bosch brake drums to suit common vehicle applications. Made from quality stabilised grey cast iron, Bosch brake drums are precision-machined, offering:

High rigidity Excellent heat dissipation For further information on brake drums refer to the Bosch Disc Rotor and Brake Drum Catalogue.

Slotted Disc RotorsThe Bosch rotor program also includes “Street Performance” slotted rotors.

Nine precision machined slots are featured on eachface of the disc to deliver improvements in overallbrake performance.

With almost 50 key part numbers across the range, Bosch’s rotors are perfectly suited for motor enthusiasts, drivers with an aggressive driving style and for towing or heavy loads, such as trade utilities.

Unlike the Bosch Performance brake upgrade kits, where the disc rotors are larger in diameter than the original discs, Bosch rotors are size matched to the originals so that they can be exchanged without any further vehicle modifi cation.

Robert Bosch (Australia) Pty Ltd1555 Centre RoadClayton, Victoria, 3168

Tel: 1300 307 040Fax: 1300 307 041www.boschautoparts.com.auCustomerService.aa@au.bosch.com

Front Cover Background.pdf 1 27/02/2014 11:53 am

Brake DrumsStreet Performance

Whilst every care has been taken in the preparation of this publication, Bosch does not warrant the accuracy or completeness of the information in this publication and Bosch reserves the right to alter specifi cations without notice. To the extent permitted by law, including the Australian Consumer Law and the Consumer Guarantees Act 1993 (NZ), Bosch excludes all liability, including negligence, for any loss incurred in the reliance on the contents of this publication.

BC

RO

TOR

DL2

0131

2

Bosch Disc Rotorsand Brake Drums

0103 Bosch Disc rotor and brake drum Brochure.indd 1,3 12/03/2014 2:17 pm

Superior Quality Cast SteelThe production of brake discs and drums requires in-depth know-how and extreme precision. Bosch selects casting materials and alloying constituents based on its long experience in braking. Rigorous testing at Bosch rotor and drum testing facilities assure the following critical properties:

A consistently high quality safety and reliability standard Excellent high and low temperature mechanical strength Wear resistance High thermal conductivity for fade and cracking resistance High damping characteristics for low noise

High Quality MachiningBosch’s experience in producing original equipment brake discs also guarantees minimum tolerances for run-out and disc thickness variation (DTV). Excessive run-out produces DTV, which in turn causes pedal vibrations, steering wheel or entire wheel pulsation and brake noise.

This is particularly critical for replacement rotors so that drivers experience a consistently high level of “as-new” brake performance with each brake service.

Bosch Rotors and Drums

Bosch has over 80 years of experience in the automotive industry, supplying premium brake parts to both vehicle manufacturers and the automotive aftermarket.

Today, Bosch is a recognised leader in automotive technology. With its global resources at its disposal, Bosch is able to source the highest quality brake components available including disc rotors and disc drums.

Product Features

Rotor feature Benefi t

Tight machining tolerances Minimised brake shudderLow lateral runoutLow disc thickness variation

Optimised design Improved thermal effi ciencyCooler brakingFade resistance

Alloy controlled castings Low noiseWear resistance

Precision balanced Minimised brake shudder

Minimum thickness marking Safety warning

Unmatched Experience Reliability Bosch Built inWear Indicators

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

Brand new brake disc showing full depth-of-wear indicators.

New

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

The disc is halfway to minimum thickness. All wear indicators are still visible.

Half Worn

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

One or two wear indicators are no longer visible. Driving is still possible, but replacements is recommended.

Almost Worn OutMinimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

All wear indicators are gone, minimum thicknessis reached. The disc must be replaced.

Worn Out

Wear Indicator

Slotted Rotors

Standard Rotors

Drums

0103 Bosch Disc rotor and brake drum Brochure.indd 4-6 12/03/2014 2:32 pm

Superior Quality Cast SteelThe production of brake discs and drums requires in-depth know-how and extreme precision. Bosch selects casting materials and alloying constituents based on its long experience in braking. Rigorous testing at Bosch rotor and drum testing facilities assure the following critical properties:

A consistently high quality safety and reliability standard Excellent high and low temperature mechanical strength Wear resistance High thermal conductivity for fade and cracking resistance High damping characteristics for low noise

High Quality MachiningBosch’s experience in producing original equipment brake discs also guarantees minimum tolerances for run-out and disc thickness variation (DTV). Excessive run-out produces DTV, which in turn causes pedal vibrations, steering wheel or entire wheel pulsation and brake noise.

This is particularly critical for replacement rotors so that drivers experience a consistently high level of “as-new” brake performance with each brake service.

Bosch Rotors and Drums

Bosch has over 80 years of experience in the automotive industry, supplying premium brake parts to both vehicle manufacturers and the automotive aftermarket.

Today, Bosch is a recognised leader in automotive technology. With its global resources at its disposal, Bosch is able to source the highest quality brake components available including disc rotors and disc drums.

Product Features

Rotor feature Benefi t

Tight machining tolerances Minimised brake shudderLow lateral runoutLow disc thickness variation

Optimised design Improved thermal effi ciencyCooler brakingFade resistance

Alloy controlled castings Low noiseWear resistance

Precision balanced Minimised brake shudder

Minimum thickness marking Safety warning

Unmatched Experience Reliability Bosch Built inWear Indicators

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

Brand new brake disc showing full depth-of-wear indicators.

New

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

The disc is halfway to minimum thickness. All wear indicators are still visible.

Half Worn

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

One or two wear indicators are no longer visible. Driving is still possible, but replacements is recommended.

Almost Worn OutMinimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

All wear indicators are gone, minimum thicknessis reached. The disc must be replaced.

Worn Out

Wear Indicator

Slotted Rotors

Standard Rotors

Drums

0103 Bosch Disc rotor and brake drum Brochure.indd 4-6 12/03/2014 2:32 pm

Superior Quality Cast SteelThe production of brake discs and drums requires in-depth know-how and extreme precision. Bosch selects casting materials and alloying constituents based on its long experience in braking. Rigorous testing at Bosch rotor and drum testing facilities assure the following critical properties:

A consistently high quality safety and reliability standard Excellent high and low temperature mechanical strength Wear resistance High thermal conductivity for fade and cracking resistance High damping characteristics for low noise

High Quality MachiningBosch’s experience in producing original equipment brake discs also guarantees minimum tolerances for run-out and disc thickness variation (DTV). Excessive run-out produces DTV, which in turn causes pedal vibrations, steering wheel or entire wheel pulsation and brake noise.

This is particularly critical for replacement rotors so that drivers experience a consistently high level of “as-new” brake performance with each brake service.

Bosch Rotors and Drums

Bosch has over 80 years of experience in the automotive industry, supplying premium brake parts to both vehicle manufacturers and the automotive aftermarket.

Today, Bosch is a recognised leader in automotive technology. With its global resources at its disposal, Bosch is able to source the highest quality brake components available including disc rotors and disc drums.

Product Features

Rotor feature Benefi t

Tight machining tolerances Minimised brake shudderLow lateral runoutLow disc thickness variation

Optimised design Improved thermal effi ciencyCooler brakingFade resistance

Alloy controlled castings Low noiseWear resistance

Precision balanced Minimised brake shudder

Minimum thickness marking Safety warning

Unmatched Experience Reliability Bosch Built inWear Indicators

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

Brand new brake disc showing full depth-of-wear indicators.

New

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

The disc is halfway to minimum thickness. All wear indicators are still visible.

Half Worn

Minimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

One or two wear indicators are no longer visible. Driving is still possible, but replacements is recommended.

Almost Worn OutMinimum Thickness

Minimum Thickness

Minimum Thickness

Minimum Thickness

All wear indicators are gone, minimum thicknessis reached. The disc must be replaced.

Worn Out

Wear Indicator

Slotted Rotors

Standard Rotors

Drums

0103 Bosch Disc rotor and brake drum Brochure.indd 4-6 12/03/2014 2:32 pm

Bosch brake drums to suit common vehicle applications. Made from quality stabilised grey cast iron, Bosch brake drums are precision-machined, offering:

High rigidity Excellent heat dissipation For further information on brake drums refer to the Bosch Disc Rotor and Brake Drum Catalogue.

Slotted Disc RotorsThe Bosch rotor program also includes “Street Performance” slotted rotors.

Nine precision machined slots are featured on eachface of the disc to deliver improvements in overallbrake performance.

With almost 50 key part numbers across the range, Bosch’s rotors are perfectly suited for motor enthusiasts, drivers with an aggressive driving style and for towing or heavy loads, such as trade utilities.

Unlike the Bosch Performance brake upgrade kits, where the disc rotors are larger in diameter than the original discs, Bosch rotors are size matched to the originals so that they can be exchanged without any further vehicle modifi cation.

Robert Bosch (Australia) Pty Ltd1555 Centre RoadClayton, Victoria, 3168

Tel: 1300 307 040Fax: 1300 307 041www.boschautoparts.com.auCustomerService.aa@au.bosch.com

Front Cover Background.pdf 1 27/02/2014 11:53 am

Brake DrumsStreet Performance

Whilst every care has been taken in the preparation of this publication, Bosch does not warrant the accuracy or completeness of the information in this publication and Bosch reserves the right to alter specifi cations without notice. To the extent permitted by law, including the Australian Consumer Law and the Consumer Guarantees Act 1993 (NZ), Bosch excludes all liability, including negligence, for any loss incurred in the reliance on the contents of this publication.

BC

RO

TOR

DL2

0131

2

Bosch Disc Rotorsand Brake Drums

0103 Bosch Disc rotor and brake drum Brochure.indd 1,3 12/03/2014 2:17 pm

Bosch brake drums to suit common vehicle applications. Made from quality stabilised grey cast iron, Bosch brake drums are precision-machined, offering:

High rigidity Excellent heat dissipation For further information on brake drums refer to the Bosch Disc Rotor and Brake Drum Catalogue.

Slotted Disc RotorsThe Bosch rotor program also includes “Street Performance” slotted rotors.

Nine precision machined slots are featured on eachface of the disc to deliver improvements in overallbrake performance.

With almost 50 key part numbers across the range, Bosch’s rotors are perfectly suited for motor enthusiasts, drivers with an aggressive driving style and for towing or heavy loads, such as trade utilities.

Unlike the Bosch Performance brake upgrade kits, where the disc rotors are larger in diameter than the original discs, Bosch rotors are size matched to the originals so that they can be exchanged without any further vehicle modifi cation.

Robert Bosch (Australia) Pty Ltd1555 Centre RoadClayton, Victoria, 3168

Tel: 1300 307 040Fax: 1300 307 041www.boschautoparts.com.auCustomerService.aa@au.bosch.com

Front Cover Background.pdf 1 27/02/2014 11:53 am

Brake DrumsStreet Performance

Whilst every care has been taken in the preparation of this publication, Bosch does not warrant the accuracy or completeness of the information in this publication and Bosch reserves the right to alter specifi cations without notice. To the extent permitted by law, including the Australian Consumer Law and the Consumer Guarantees Act 1993 (NZ), Bosch excludes all liability, including negligence, for any loss incurred in the reliance on the contents of this publication.

BC

RO

TOR

DL2

0131

2

Bosch Disc Rotorsand Brake Drums

0103 Bosch Disc rotor and brake drum Brochure.indd 1,3 12/03/2014 2:17 pm