From Thermochemistry to Thermodynamics
Transcript of From Thermochemistry to Thermodynamics
![Page 1: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/1.jpg)
From Thermochemistry to Thermodynamics
Chapter 5 to Chapter 19
break out the clickers
11
![Page 2: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/2.jpg)
Spontaneity• Every process has a preferred direction, under a
given set of conditions.
• This direction can be referred to as the spontaneous direction or the thermodynamically favored direction
• A spontaneous (thermodynamically favored) process is one that occurs without ongoing outside intervention
• A spontaneous (thermodynamically favored) process can be reversed only by some action, energy, or outside force.
2
2
![Page 3: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/3.jpg)
Not to confuse spontaneous with spontaneous
• Most thermodynamically favored (spontaneous) reactions, will require an activation or ignition energy:✓ Water behind a dam won’t flow until the gate is opened✓ A mixture of CH4 and O2 will remain until sparked
• In the general language, spontaneous means: occurring as a result of a sudden inner impulse or inclination and without premeditation or external stimulus.
• In the thermodynamics, spontaneous means: occurring without continuous outside intervention.
3
3
![Page 4: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/4.jpg)
The Common-Sense Law• Things tend to become dispersed.✓ Marbles will scatter, but not roll back in the bag.✓ Fences fall down, but piles of wood don’t assemble
into fences.✓ Jigsaw puzzles disassemble easily, but shaking the
box never result in reassembly.
• Each of the spontaneous (thermodynamically favored) processes above reduces the constraints on the objects making the system more disordered, more dispersed. 4
4
![Page 5: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/5.jpg)
The Common-Sense Law applies at the molecular level as well.
• Salt dissolves• Gases disperse
5
5
![Page 6: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/6.jpg)
The Common-Sense Law also Applies to Energy Dispersal
• A hot piece of metal will cool when dropped in water and the water will warm until the water and metal are in thermal equilibrium.
• Energy disperses.
6
6
![Page 7: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/7.jpg)
Which process(es) shown below is(are) spontaneous (thermodynamically favored)?
7
situation #1 situation #2
7
![Page 8: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/8.jpg)
Which process(es) shown below is(are) spontaneous? Both are spontaneous.1. Ice at room
temperature:• energy in, ice melts.
2. water in the freezer:• energy out, water
freezes.
8
situation #1 situation #2
8
![Page 9: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/9.jpg)
The Common Sense Law• Situation #1 is endothermic.• Endothermic reactions seem to oppose the energy
dispersal Common Sense Law.• Most spontaneous reactions you are familiar with,
combustion reactions, are all exothermic, which obey the Common Sense Law, yet here we have an endothermic process, disobeying the Common Sense Law for energy, yet the reaction is spontaneous
• This tells us that analyzing just energy dispersal is not enough to determine if a process will be spontaneous or not...
• This reaction does obey the Common Sense Law for matter dispersal
9
#1
9
![Page 10: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/10.jpg)
The Common Sense Law• Situation #2 is exothermic.• Exothermic reactions seem obey the energy
dispersal common sense law.• Yet this reaction seems to be disobeying the
Common Sense Law for matter − the water is freezing and becoming more ordered.
• This tells us that analyzing just matter dispersal is not enough to determine if a process will be spontaneous or not…
• So what should we consider to determine spontaneity?
10
10
![Page 11: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/11.jpg)
What drives reactions, and determines spontaneity?
Dispersal of energy and matter
11
EnergyEntropyand
low
high
processes that move toward higher entropy and lower energy are thermodynamically favorable
11
![Page 12: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/12.jpg)
EntropyEntropy, (S) is a measure of dispersal -
dispersal of matter and dispersal of energy
• In 1877, Austrian Ludwig Eduard Boltzmann defined the entropy of a substance as: ✓ the number of different ways to describe
a system✓ He called this the “degrees of freedom”
of the system• We can loosely describe entropy to be a
measure of the disorder of a substance. 12
1844-1906
12
![Page 13: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/13.jpg)
Spontaneity and Kinetics and Reaction Direction
• Spontaneity is unrelated to the speed of a reaction - It’s kinetics that tells us about the rate of a reaction.✓ Some spontaneous processes may be extremely slow.✓ Some may be fast.
• Spontaneity tells us the direction in which a reaction proceeds, not the speed.
13
13
![Page 14: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/14.jpg)
Entropycomparisons to help us predict entropy
1414
![Page 15: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/15.jpg)
Which has the least amount of entropy?
1. solid2. liquid3. gas4. not enough information to
determine15
15
![Page 16: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/16.jpg)
Which has the least amount of entropy?1. solid• phase is an important factor in
determining entropy2. liquid3. gas4. not really enough information to
determine16
16
![Page 17: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/17.jpg)
Which has least entropy at room conditions1. 1 mole of gold2. 1 mole of mercury3. equal amounts of entropy since
there is 1 mole of each substance
4. not enough information to determine 17
17
![Page 18: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/18.jpg)
Which has least entropy at room conditions1. 1 mole of gold, • since gold is solid, yet the mercury would
be liquid at room temp.• Yes, AP expects you to know the phase of
elements at room conditions.• Again, phase is a very important factor
when deciding on entropy2. 1 mole of mercury3. not enough information to determine 18
18
![Page 19: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/19.jpg)
Which gas has more entropy?1. NO2. NO2
3. they have the same entropy4. not enough information to
determine5. I have absolutely no idea how
I would even venture a guess.19
These gases are at the same T, P, V conditions.
19
![Page 20: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/20.jpg)
Which gas has more entropy?1. NO (211 J/molK)
2. NO2 (240 J/molK)• All else being the same, larger molecules have
higher entropy.There are more confirmations and more ways to distribute energy.
3. they have the same entropy4. not enough information to determine5. I have absolutely no idea how I
would even venture a guess.20
These gases are at the same T, P, V conditions.
20
![Page 21: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/21.jpg)
Which has more entropy?
1. two moles of NO2(g)
2. one mole of N2O4(g)
3. the same4. not enough information to
determine21
at the same temp, same volume
21
![Page 22: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/22.jpg)
Which has more entropy?
• Hard to say...lets look it up on the Thermo Sheets
1. two moles of NO2 240.45 J/molK
2. one mole of N2O4 304.3 J/molK
3. the same4. not enough information to
determine22
at the same temp, same volume
22
![Page 23: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/23.jpg)
Which has more entropy?
1. two moles of NO2 2(240.45 J/molK)• since these molecules are not tied
together with a bond, they have more “degrees of freedom” or positional possibilities.
• more molecules means more entropy.2. one mole of N2O4 (304.3 J/molK)3. the same4. not enough information to determine 23
at the same temp, same volume
23
![Page 24: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/24.jpg)
Which has more entropy?1. 10 ml of 1 M NaCl2. 10 ml of 2 M NaCl3. 1 and 2 have the same entropy
since they both represent the same molecule in solution.
24
24
![Page 25: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/25.jpg)
Which has more entropy?1. 10 ml of 1 M NaCl2. 10 ml of 2 M NaCl• All other parameters being equal,
higher concentration will have more entropy since there are more molecules present.
3. 1 and 2 have the same entropy since they both represent the same molecule. 25
25
![Page 26: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/26.jpg)
Which has the most entropy?
And can you name these three molecules?
26
1 2 3
All molecules at the same temperature.
HC
26
![Page 27: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/27.jpg)
Which has the most entropy?• Propane is larger and thus has more
entropy than smaller molecules.
27
27
![Page 28: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/28.jpg)
Which has more entropy?
1. 1 mole HF(g) at 25ºC, 1 atm
2. 1 mole HCl(g) at 25ºC, 1 atm
3. not enough information to determine
4. 1 and 2 have the same entropy
28
28
![Page 29: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/29.jpg)
Which has more entropy?
1. 1 mole HF(g) at 25ºC, 1 atm• (174 J/mol K)
2. 1 mole HCl(g) at 25ºC, 1 atm • (187 J/mol K) • Likely, the more entropy is due to Cl’s larger
electron cloud.
3. not enough information to determine
4. 1 and 2 have the same entropy29
29
![Page 30: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/30.jpg)
Which has the most entropy?(Choose more than one if there are molecules with the same entropy.)
30
1 2
3 45
1 2
3 45
1 2
3 45
12
3
30
![Page 31: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/31.jpg)
Which has the most entropy?(Choose more than one if there are molecules with the same entropy.)
• All three molecules are C5H12
• All other factors equal, straight chain molecules have more “degrees of freedom” than branched chain molecules.
• They are more “floppy.”
• What is the name of molecule #1?
1 2
3 452
1 2
3 45
1
31
1 2
3 453
31
![Page 32: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/32.jpg)
Which has the most entropy?(Choose more than one if there are molecules with the same entropy.)
• All three molecules are C5H12
• All other factors equal, straight chain molecules have more “degrees of freedom” than branched chain molecules.
• What is the name of molecule #1?
• Pentane
1 2
3 452
1 2
3 45
1
32
1 2
3 453
32
![Page 33: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/33.jpg)
Which has more entropy?1. 1 mol He(g) at 0ºC2. 1 mol He(g) at 10 K3. not enough information to
determine4. 1 and 2 have the same
entropy
33
33
![Page 34: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/34.jpg)
Which has more entropy?
1. He at 0ºC• All other parameters being equal,
higher temp, means higher entropy
2. He at 10 K3. not enough information to determine4. 1 and 2 have the same entropy
34
34
![Page 35: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/35.jpg)
When predicting the entropy of one substance to another, consider★ Phase
• gases have significantly more entropy than liquids which have more entropy than solids★ Number of molecules
• more molecules have more positional possibilities, which means more entropy
• molecule size• significantly larger molecules have more entropy because they have more bending and
folding options
• molecule shape• long, straight chained molecules have more entropy than branched molecules
• larger atoms• for similar molecules, the one that contains larger atoms with larger electron cloud, will
have more entropy
• temperature• higher temperature causes greater entropy
If there are conflicting conditions, consider the change in the number of gas molecules as the determining factor.
35
35
![Page 36: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/36.jpg)
Select the process(es) below in which entropy increases, ∆S = +
1. CaCO3(s) → CaO(s) + CO2(g)
2. 2SO2(g) + O2(g) → 2SO3(g)
3. H2O(g) → H2O(L)
4. Fe3O4(s) + 4H2(g) → 3Fe(s) + 4H2O(g)
36
Predict without using your thermo sheets
36
![Page 37: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/37.jpg)
Select the processes below in which entropy increases.1. CaCO3(s) → CaO(s) + CO2(g)
• solid reactant to 1 mol gas product
2. 2SO2(g) + O2(g) → 2SO3(g)
• 3 mol gas reactant to 2 mol gas product
3. H2O(g) → H2O(L)
• 1 mol gas reactant to only liquid product
4. Fe3O4(s) + 4H2(g) → 3Fe(s) + 4H2O(g)
• 4 mol gas reactant to 4 mol gas product, but total 5 mol reactant to 7 mol product 37
37
![Page 38: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/38.jpg)
Use your thermodynamic table to calculate ∆Sº forCaCO3(s) → CaO(s) + CO2(g)
• Report your answer to the nearest whole number.
38
∆ Srxn = ΣnSºProducts − ΣnSºReactants
38
![Page 39: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/39.jpg)
Use your thermodynamic table to calculate ∆Sº forCaCO3(s) → CaO(s) + CO2(g)
• [(+39.75 J/molK + (+213.6 J/molK)] − (+92.88 J/molK) = +160.47 J/molK
• A positive value as you would predict because of the formation of a gas.
39
39
![Page 40: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/40.jpg)
Use your thermodynamic table to calculate ∆Sº for2SO2(g) + O2(g) → 2SO3(g)
• Report your answer to the nearest whole number.
40
40
![Page 41: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/41.jpg)
Use your thermodynamic table to calculate ∆Sº for2SO2(g) + O2(g) → 2SO3(g)
• 2(+256.2 J/molK) - [2(+248.5 J/molK + (+205.0 J/molK)]
• = -189.6 J/molK• A negative value as you would
predict because of the change of 3 moles of gas into only 2 moles of gas.
41
41
![Page 42: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/42.jpg)
Use your thermodynamic table to calculate ∆Sº for
H2O(g) ⇋ H2O(L)
• Report your answer to the nearest whole number.
42
42
![Page 43: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/43.jpg)
Use your thermodynamic table to calculate ∆Sº for H2O(g) ⇋ H2O(L)
• (+69.91 J/molK) + (+188.83 J/molK) = −118.92 J/molK
• A negative value as you would predict because of the formation of a liquid from a gas.
43
43
![Page 44: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/44.jpg)
Use your thermodynamic table to calculate ∆Sº forFe3O4(s) + 4H2(g) → 3Fe(s) + 4H2O(g)
• Report your answer to the nearest whole number.
44
44
![Page 45: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/45.jpg)
Use your thermodynamic table to calculate ∆Sº forFe3O4(s) + 4H2(g) → 3Fe(s) + 4H2O(g) [3(+27.15 J/molK + 4(+188.83 J/molK)] − [(+146.4 J/molK) + 4(+130.58 J/molK)]
• = +160.05 J/molK• A positive value as you would predict
because of the change of 5 moles of reactant into only 7 moles of product, while moles of gas is same on both side.
45
45
![Page 46: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/46.jpg)
Select the process(es) below in which entropy increases, ∆S = +
1. 2O3(g) → 3O2(g)
2. 2CH4(g) → C2H6(g) + H2(g)
3. NaCl(s) → Na+(aq) + Cl−(aq)
4. MgCl2(s) → Mg2+(aq) + 2Cl−(aq)
46
Predict without using your thermo sheets
46
![Page 47: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/47.jpg)
Select the processes below in which entropy increases.1. 2O3(g) ⇋ 3O2(g)
2. 2CH4(g) → C2H6(g) + H2(g)• It would be unlikely that you would be asked to distinguish something
like this as it is a VERY tough decision as demonstrated by the following slide showing that there is very small entropy decrease.
3. NaCl(s) → Na+(aq) + Cl−(aq)• Unless there is some other info in the problem, you can assume for
dissolution ∆S is positive
4. MgCl2(s) → Mg2+(aq) + 2Cl−(aq)• This is a case in which ∆S is negative, though there is nothing in the
problem that indicates this.• Let’s take a closer look to see why... 47
47
![Page 48: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/48.jpg)
Use your thermodynamic table to calculate ∆Sº for 2O3(g) → 3O3(g)
• Report your answer to the nearest whole number.
48
48
![Page 49: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/49.jpg)
Use your thermodynamic table to calculate ∆Sº for 2O3(g) → 3O2(g)
• 3(+205 J/molK) − 2(+237.6 J/molK)] = +139.8 J/molK
• This is a positive entropy change which makes sense since
• gas on both sides• # molecules increases during the reaction
49
49
![Page 50: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/50.jpg)
Use your thermodynamic table to calculate ∆Sº for 2CH4(g) → C2H6(g) + H2(g)
• Report your answer to the nearest whole number.
50
50
![Page 51: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/51.jpg)
Use your thermodynamic table to calculate ∆Sº for 2CH4(g) → C2H6(g) + H2(g)
• [(+229.5 J/molK) + (+130.58 J/molK)] − 2(+186.3 J/molK) = −12.52 J/molK
• This is a very small entropy change which makes sense since
• gas on both sides• same # molecules on both sides• It is possible that the very limited positional
possibilities for the tiny H2 molecule, contribute to the decrease in entropy. 51
51
![Page 52: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/52.jpg)
Use your thermodynamic table to calculate ∆Sº for NaCl(s) → Na+(aq) + Cl−(aq)
• Report your answer to the nearest whole number.
52
52
![Page 53: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/53.jpg)
Use your thermodynamic table to calculate ∆Sº for
NaCl(s) → Na+(aq) + Cl−(aq) (or NaCl(aq))• (+115J/molK) − (+72.33 J/molK) = +43 J/molK • This is a positive ∆S, thermodynamically
favorable, as you would expect from a salt breaking apart into its ions.
53
53
![Page 54: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/54.jpg)
Use your thermodynamic table to calculate ∆Sº for MgCl2(s) → Mg2+(aq) + 2Cl−(aq)
• Report your answer to the nearest whole number.
54
54
![Page 55: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/55.jpg)
Use your thermodynamic table to calculate ∆Sº for
MgCl2(s) → Mg2+(aq) + 2Cl−(aq)• [(+89.6 J/molK) + (−137 J/molK)] − 2(+56.1 J/molK) = −114.4 J/molK • This is a negative ∆S, thermodynamically unfavorable,
Whaaaat!!!???• The hydration shell makes the
water part of the system decreases the entropy more than the salt part of the system breaking apart increases the entropy .
• Nonethless, unless you have some other indicator in the problem, you should assume that dissolution increases entrogy
2+
55
55
![Page 56: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/56.jpg)
56
The unit label on ∆Sº could be1. 2.
3.
4.
5.
6.
7.
8.
9.
JmolJ
mol ⋅KJgJºC
JgºC
kJmol
kJmol ⋅ oF
J
kJ
56
![Page 57: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/57.jpg)
57
The unit label on ∆Sº could be1. 2.
3.
4.
5.
6.
7.
8.
9.
JmolJ
mol ⋅KJgJºC
JgºC
kJmol
kJmol ⋅F
J
kJ
57
![Page 58: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/58.jpg)
Which graph below might best represent entropy changes as temperature increases
58
temp (K) →
Solid liquid gas
temp (K) →
S
Solid liquid gas
temp (K) →
S
Solid liquid gas
temp (K) →
S
Solid liquid gas
temp (K) →
S
1 5
4 6
Solid liquid gas
temp (K) →
S2
Solid liquid gas
temp (K) →
S
3
58
![Page 59: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/59.jpg)
Which graph below might best represent entropy changes as temperature increases• #3• Note the larger
entropy change for the L-G phase change
59
temp (K) →
melting
boilingSolid liquid gas
temp (K) →
S
3
59
![Page 60: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/60.jpg)
SpontaneityWhat drives reactions?
How can we mathematically combine energy and entropy?
What information do we need to know inorder to predict the spontaneity of a process?
6060
![Page 61: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/61.jpg)
• Low energy is favored✓∆H decrease (−) is
thermodynamically favorable✓You are aware that exothermic
reactions are favorable reactions‣ combustion reactions
Two Forces Drive Reactions
61
61
![Page 62: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/62.jpg)
LAD C.5Ammonium thiocyanate + barium hydroxide.
What drives reactions?
Caution, the products of this reaction have a potent smell. WAFT − do not put you nose into the beaker.
6262
![Page 63: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/63.jpg)
The equation for the reaction between ammonium thiocyanate and barium hydroxide.2NH4SCN(s) + Ba(OH)2(s) → Ba(SCN)2(ppt) + 2NH3(g) + 2H2O(L)
2NH4SCN(s) + Ba(OH)2•8H2O(s) → Ba(SCN)2(ppt) + 2NH3(g) + 10H2O(L)
This reaction is spontaneous, yet very endothermic.
Since the energy factor is unfavorable and not helping the reaction be spontaneous.
What is it that is driving this reaction?
Entropy is thermodynamically favorable and helping the reaction to be spontaneous.
63
63
![Page 64: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/64.jpg)
Energy AND Entropy drive reactions• High entropy is favored✓∆S increase (+) is favored
• For spontaneous processes with unfavorable energy change, the entropy change must be favorable.✓NH4NO3 → NH4+ + NO3− ✓H2O(s) → H2O(L)
✓ 2NH4SCN(s) + Ba(OH)2•8H2O(s) → Ba(SCN)2(ppt) + 2NH3(g) + 10H2O(L)
64
64
![Page 65: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/65.jpg)
So how can we predict spontaneity?• Josaiah Willard Gibbs (USA) in 1873
combined enthalpy and entropy, the two driving forces into one mathematical relationship
• Gibbs Free Energy (G).✓∆G = ∆H - T∆S✓ ∆G is a measure of the spontaneity of a
process and the “useful” energy available from it.
✓ ∆H is enthalpy✓ ∆S is entropy✓ T is temperature in Kelvin 65
1839-1903
65
![Page 66: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/66.jpg)
∆G = ∆H - T∆S• If ∆G < 0, a reaction will proceed in
the forward direction and is considered thermodynamically favorable (aka spontaneous).
• If ∆G > 0, a reaction will not proceed in forward direction and is considered thermodynamically unfavorable (aka not spontaneous).
66
66
![Page 67: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/67.jpg)
Using ∆Gº• Standard conditions✓ 1 atm✓ 1 M concentration
• The ∆Gº values in the table are reported for temperatures at 25ºC
• ∆Gfº values have been established for many substances making the ∆Gº calculation at 1 M or 1 atm and for 25ºC.
• ∆GºRx = ∑n∆Gfºprod - ∑n∆Gfºreact
67
67
![Page 68: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/68.jpg)
• q = c×m×∆T• q = C×∆T• q = ∆H×amount• ∆HºRx = ∑n∆Hfºprod - ∑n∆Hfºreact
• Hess’ Law• ∆SºRx = ∑n∆Sºprod - ∑n∆Sºreact
• ∆Gº = ∆Hº - T∆Sº• ∆GºRx = ∑n∆Gfºprod - ∑n∆Gfºreact
So what reactions do we know how to use in this unit?
68
13 Chemistry Practice Exam
��
�
GASES, LIQUIDS, AND SOLUTIONS
PV = nRT
PA = Ptotal u XA, where XA = moles Atotal moles
Ptotal = PA + PB + PC + . . .
n = mM
K = qC + 273
D = m
V
KE per molecule = 12
mv2
Molarity, M = moles of solute per liter of solution
A = abc
1 1
pressurevolumetemperaturenumber of molesmassmolar massdensitykinetic energyvelocityabsorbancemolar absorptivitypath lengthconcentration
Gas constant, 8.314 J mol K
0.08206
PVTnm
DKE
Aabc
R
¥
� �
M
1 1
1 1
L atm mol K
62.36 L torr mol K 1 atm 760 mm Hg
760 torr
STP 0.00 C and 1.000 atm
� �
� � D
THERMOCHEMISTRY/ ELECTROCHEMISTRY
products reactants
products reactants
products reactants
ln
ff
ff
q mc T
S S S
H H H
G G G
G H T S
RT K
n F E
qIt
'
'
' ' '
' ' '
' ' '
�Ç Ç
�Ç Ç
�Ç Ç
�
�
�
D D D
DD D
DD D
D DD
D
!
heatmassspecific heat capacitytemperature
standard entropy
standard enthalpy
standard free energynumber of moles
standard reduction potentialcurrent (amperes)charge (coulombs)t
qmcT
S
H
Gn
EIqt
DDD
D
ime (seconds)
Faraday’s constant , 96,485 coulombs per moleof electrons1 joule1volt 1coulomb
F
���
13 Chemistry Practice Exam
��
�
GASES, LIQUIDS, AND SOLUTIONS
PV = nRT
PA = Ptotal u XA, where XA = moles Atotal moles
Ptotal = PA + PB + PC + . . .
n = mM
K = qC + 273
D = m
V
KE per molecule = 12
mv2
Molarity, M = moles of solute per liter of solution
A = abc
1 1
pressurevolumetemperaturenumber of molesmassmolar massdensitykinetic energyvelocityabsorbancemolar absorptivitypath lengthconcentration
Gas constant, 8.314 J mol K
0.08206
PVTnm
DKE
Aabc
R
¥
� �
M
1 1
1 1
L atm mol K
62.36 L torr mol K 1 atm 760 mm Hg
760 torr
STP 0.00 C and 1.000 atm
� �
� � D
THERMOCHEMISTRY/ ELECTROCHEMISTRY
products reactants
products reactants
products reactants
ln
ff
ff
q mc T
S S S
H H H
G G G
G H T S
RT K
n F E
qIt
'
'
' ' '
' ' '
' ' '
�Ç Ç
�Ç Ç
�Ç Ç
�
�
�
D D D
DD D
DD D
D DD
D
!
heatmassspecific heat capacitytemperature
standard entropy
standard enthalpy
standard free energynumber of moles
standard reduction potentialcurrent (amperes)charge (coulombs)t
qmcT
S
H
Gn
EIqt
DDD
D
ime (seconds)
Faraday’s constant , 96,485 coulombs per moleof electrons1 joule1volt 1coulomb
F
���
13 Chemistry Practice Exam
��
�
GASES, LIQUIDS, AND SOLUTIONS
PV = nRT
PA = Ptotal u XA, where XA = moles Atotal moles
Ptotal = PA + PB + PC + . . .
n = mM
K = qC + 273
D = m
V
KE per molecule = 12
mv2
Molarity, M = moles of solute per liter of solution
A = abc
1 1
pressurevolumetemperaturenumber of molesmassmolar massdensitykinetic energyvelocityabsorbancemolar absorptivitypath lengthconcentration
Gas constant, 8.314 J mol K
0.08206
PVTnm
DKE
Aabc
R
¥
� �
M
1 1
1 1
L atm mol K
62.36 L torr mol K 1 atm 760 mm Hg
760 torr
STP 0.00 C and 1.000 atm
� �
� � D
THERMOCHEMISTRY/ ELECTROCHEMISTRY
products reactants
products reactants
products reactants
ln
ff
ff
q mc T
S S S
H H H
G G G
G H T S
RT K
n F E
qIt
'
'
' ' '
' ' '
' ' '
�Ç Ç
�Ç Ç
�Ç Ç
�
�
�
D D D
DD D
DD D
D DD
D
!
heatmassspecific heat capacitytemperature
standard entropy
standard enthalpy
standard free energynumber of moles
standard reduction potentialcurrent (amperes)charge (coulombs)t
qmcT
S
H
Gn
EIqt
DDD
D
ime (seconds)
Faraday’s constant , 96,485 coulombs per moleof electrons1 joule1volt 1coulomb
F
���
13 Chemistry Practice Exam
��
�
GASES, LIQUIDS, AND SOLUTIONS
PV = nRT
PA = Ptotal u XA, where XA = moles Atotal moles
Ptotal = PA + PB + PC + . . .
n = mM
K = qC + 273
D = m
V
KE per molecule = 12
mv2
Molarity, M = moles of solute per liter of solution
A = abc
1 1
pressurevolumetemperaturenumber of molesmassmolar massdensitykinetic energyvelocityabsorbancemolar absorptivitypath lengthconcentration
Gas constant, 8.314 J mol K
0.08206
PVTnm
DKE
Aabc
R
¥
� �
M
1 1
1 1
L atm mol K
62.36 L torr mol K 1 atm 760 mm Hg
760 torr
STP 0.00 C and 1.000 atm
� �
� � D
THERMOCHEMISTRY/ ELECTROCHEMISTRY
products reactants
products reactants
products reactants
ln
ff
ff
q mc T
S S S
H H H
G G G
G H T S
RT K
n F E
qIt
'
'
' ' '
' ' '
' ' '
�Ç Ç
�Ç Ç
�Ç Ç
�
�
�
D D D
DD D
DD D
D DD
D
!
heatmassspecific heat capacitytemperature
standard entropy
standard enthalpy
standard free energynumber of moles
standard reduction potentialcurrent (amperes)charge (coulombs)t
qmcT
S
H
Gn
EIqt
DDD
D
ime (seconds)
Faraday’s constant , 96,485 coulombs per moleof electrons1 joule1volt 1coulomb
F
���
13 Chemistry Practice Exam
��
�
GASES, LIQUIDS, AND SOLUTIONS
PV = nRT
PA = Ptotal u XA, where XA = moles Atotal moles
Ptotal = PA + PB + PC + . . .
n = mM
K = qC + 273
D = m
V
KE per molecule = 12
mv2
Molarity, M = moles of solute per liter of solution
A = abc
1 1
pressurevolumetemperaturenumber of molesmassmolar massdensitykinetic energyvelocityabsorbancemolar absorptivitypath lengthconcentration
Gas constant, 8.314 J mol K
0.08206
PVTnm
DKE
Aabc
R
¥
� �
M
1 1
1 1
L atm mol K
62.36 L torr mol K 1 atm 760 mm Hg
760 torr
STP 0.00 C and 1.000 atm
� �
� � D
THERMOCHEMISTRY/ ELECTROCHEMISTRY
products reactants
products reactants
products reactants
ln
ff
ff
q mc T
S S S
H H H
G G G
G H T S
RT K
n F E
qIt
'
'
' ' '
' ' '
' ' '
�Ç Ç
�Ç Ç
�Ç Ç
�
�
�
D D D
DD D
DD D
D DD
D
!
heatmassspecific heat capacitytemperature
standard entropy
standard enthalpy
standard free energynumber of moles
standard reduction potentialcurrent (amperes)charge (coulombs)t
qmcT
S
H
Gn
EIqt
DDD
D
ime (seconds)
Faraday’s constant , 96,485 coulombs per moleof electrons1 joule1volt 1coulomb
F
���
13 Chemistry Practice Exam
��
�
GASES, LIQUIDS, AND SOLUTIONS
PV = nRT
PA = Ptotal u XA, where XA = moles Atotal moles
Ptotal = PA + PB + PC + . . .
n = mM
K = qC + 273
D = m
V
KE per molecule = 12
mv2
Molarity, M = moles of solute per liter of solution
A = abc
1 1
pressurevolumetemperaturenumber of molesmassmolar massdensitykinetic energyvelocityabsorbancemolar absorptivitypath lengthconcentration
Gas constant, 8.314 J mol K
0.08206
PVTnm
DKE
Aabc
R
¥
� �
M
1 1
1 1
L atm mol K
62.36 L torr mol K 1 atm 760 mm Hg
760 torr
STP 0.00 C and 1.000 atm
� �
� � D
THERMOCHEMISTRY/ ELECTROCHEMISTRY
products reactants
products reactants
products reactants
ln
ff
ff
q mc T
S S S
H H H
G G G
G H T S
RT K
n F E
qIt
'
'
' ' '
' ' '
' ' '
�Ç Ç
�Ç Ç
�Ç Ç
�
�
�
D D D
DD D
DD D
D DD
D
!
heatmassspecific heat capacitytemperature
standard entropy
standard enthalpy
standard free energynumber of moles
standard reduction potentialcurrent (amperes)charge (coulombs)t
qmcT
S
H
Gn
EIqt
DDD
D
ime (seconds)
Faraday’s constant , 96,485 coulombs per moleof electrons1 joule1volt 1coulomb
F
���
68
![Page 69: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/69.jpg)
Use the thermodynamic tables to calculate ∆Gº298 (at 25ºC) (º refers to standard conditions: 1atm and 1M)(Because temperature is not a standard condition like pressure and molarity, the subscript number gives the particular temperature. If no number is given, assume 298 K.)
2SO3(g) → 2SO2(g) + O2(g)
69
69
![Page 70: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/70.jpg)
Use the thermodynamic tables to calculate ∆Gº298 (at 25ºC) (º refers to standard conditions: 1atm and 1M)(the subcript number give the temperature)
2SO3(g) → 2SO2(g) + O2(g)
∆Gºf SO2(g) = −300.4kJ∆Gºf SO3(g) = −370.4kJ∆Gºf O2(g) = 0 kJ
70
70
![Page 71: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/71.jpg)
Use the thermodynamic tables to calculate ∆Gº298 at 25ºC (º refers to standard conditions: 1atm and 1M)
2SO3(g) → 2SO2(g) + O2(g)• ∆Grxº = ∑n∆Gfºprod - ∑n∆Gfºreact
• [2(-300.4kJ/mol) + 0kJ/mol] - [2(-370.4kJ/mol)]
• ∆Gºrx = +140 kJ/molrx (per reaction as written)
• A positive ∆Gº does not mean that nothing happens, it simply means that the reaction favors reactants NOT products.
• that is to say if you put 1 atm of each substance in a container, the reaction would not proceed in the forward direction, but it would proceed in the reverse direction.
71
71
![Page 72: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/72.jpg)
Use the thermodynamic tables to calculate ∆Hº and ∆Sº at 25ºC2SO3(g) → 2SO2(g) + O2(g)
∆Hºf SO2(g) = −296.9 kJ∆Hºf SO3(g) = −395.2 kJ∆Hºf O2(g) = 0 kJ
Sº SO2(g)= 248.5 JSº SO3(g)= 256.2 JSº O2(g) = 205 J
72
72
![Page 73: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/73.jpg)
Use the thermodynamic tables to calculate ∆Hº and ∆Sº at 25ºC2SO3(g) → 2SO2(g) + O2(g)
• ∆H = [2(-296.9)+ 0] - 2(-395.2)• ∆H = +196.6 kJ/molrx
✓ (which is to say per 2 mol of SO3, per 2 mol of SO2, per 1 mol of O2)
• ∆S = [2(+248.5)+ 205] - 2(256.2)• ∆S = +189.6 J/molrx K
✓ (which is to say per 2 mol of SO3, per 2 mol of SO2, per 1 mol of O2)
73
73
![Page 74: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/74.jpg)
Using the ∆Hº and ∆Sº just calculated, use them to calculate ∆Gº with Gibbs Free Energy Formula at 25ºC.2SO3(g) → 2SO2(g) + O2(g)
• ∆Gº = ∆Hº − T∆Sº
• ∆H = [2(-296.9)+ 0] - 2(-395.2)• ∆H = +196.6 kJ/molrx
• ∆S = [2(+248.5)+ 205] - 2(256.2)• ∆S = +189.6 J/molrx K
74
74
![Page 75: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/75.jpg)
Using the ∆Hº and ∆Sº just calculated, use them to calculate ∆Gº with Gibbs Free Energy Formula at 25ºC.2SO3(g) → 2SO2(g) + O2(g)
• ∆Gº = ∆Hº − T∆Sº• Watch out for the units!!• ∆G = +196.6kJ − [298K(0.1896kJ/K)] = +140 kJ/mol
• How does it compare to the previously calculated with ∆Gfº values?
• the same since it was all for 25º.75
• ∆S = +189.6 J/molrx K• ∆H = +196.6 kJ/molrx
75
![Page 76: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/76.jpg)
Calculating ∆GºTemp at other than 25º• Conditions are often NOT at 25ºC.• ∆Gº is very temperature dependent✓ notice the T in the formula ∆Gº = ∆Hº − T∆Sº
• When not at 25º✓ You can not use ∆GRxº = ∑n∆Gfºprod − ∑n∆Gfºreact
‣ because ∆Gfº values are listed only for 25ºC✓ You must use ∆Gºtemp = ∆Hº − T∆Sº
• How can we get away with this? ✓ ∆Hº and ∆Sº are NOT very temp dependent,
thus a decent estimation of ∆Gºtemp can be determined at different temperatures using Gibbs Equation. 76
76
![Page 77: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/77.jpg)
Using the ∆Hº and ∆Sº previously calculated and the Gibbs Free Energy Formula, to calculate free energy at 1127ºC, which is 1400K.2SO3(g) → 2SO2(g) + O2(g)
• ∆Gº1400. = ∆Hº − T∆Sº
• ∆Hº = +196.6 kJ/molrx
• ∆Sº = +189.6 J/molrxK77
77
![Page 78: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/78.jpg)
Using the ∆Hº and ∆Sº previously calculated and the Gibbs Free Energy Formula, calculate free energy at 1127ºC2SO3(g) → 2SO2(g) + O2(g)
∆GºT,1400 at 1400 K?∆Gº = ∆Hº - T∆Sº
• Watch out for the units!!• ∆G = +196.6kJ/- [1400 K (0.1896kJ/K)] = -68.84kJ
• This is spontaneous! Say whaaaat!!• at 298 K the Rx was NOT spontaneous, +140 kJ/molrx
78
• ∆S = +189.6 J/molrx K• ∆H = +196.6 kJ/molrx
78
![Page 79: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/79.jpg)
2SO3(g) → 2SO2(g) + O2(g)
∆Hº = +196.6 kJ and ∆Sº = 0.1896 kJ• This reaction is not spontaneous at room
temperature• (∆Gº298 = +140kJ),
• It is spontaneous at 1127ºC• (∆Gº1400 = −68.84kJ),
• at what temperature (in ºC) does the spontaneity change from spontaneous to not spontaneous?
79
79
![Page 80: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/80.jpg)
2SO3(g) → 2SO2(g) + O2(g)
If this reaction is not spontaneous at room temperature (∆Gº298 = +140kJ), and it is spontaneous at 1127ºC (∆Gº1400 = −68.84kJ), at what temperature (in ºC) does the spontaneity change from spontaneous to not spontaneous?
• ∆Gº = ∆Hº − T∆Sº
• The sign of ∆G changes when ∆G = 0, solve for T
• 0 = +196.6kJ − T(0.1896kJ/K)
• T = 1037 K, which is 764ºC80
• ∆S = +189.6 J/molrx K• ∆H = +196.6 kJ/molrx
80
![Page 81: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/81.jpg)
What is going on when
∆G = 0?
8181
![Page 82: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/82.jpg)
2SO3(g) → 2SO2(g) + O2(g)
If this reaction is not spontaneous at room temperature, 25ºC (∆Gº298 = +140kJ), and it is spontaneous at 1127ºC (∆Gº1400 = −68.84kJ)What happens at 764ºC?1. The reaction “stops.”2. The reaction is at equilibrium.3. It depends on if you start above or
below 764ºC.4. Some other situation.
82
• ∆Hº = +196.6 kJ/for the reaction
• ∆Sº = +189.6 J/K for the reaction
82
![Page 83: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/83.jpg)
2SO3(g) → 2SO2(g) + O2(g)
If this reaction is not spontaneous at room temperature, 25ºC (∆Gº298 = +140kJ), and it is spontaneous at 1127ºC (∆Gº1400 = −68.84kJ)What happens at 764ºC?1. The reaction “stops.”
• For now, we’ll define equlibrium as the moment at which a reversible reaction “stops.”
2. The reaction is at equilibrium, since ∆Gº1127 = 0
3. It depends on if you start above or below 764ºC
4. Some other situation. 83
83
![Page 84: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/84.jpg)
Consider the effect of temperature on spontaneity. Remember Kelvin temps are always positive ∆H − T∆S = ∆G
84
∆H ∆S ∆G−
favorable+
favorableis always spontaneous
+ unfavorable
− unfavorable
is never spontaneous
− favorable
− unfavorable
Spontaneous only if |∆H| > |T∆S|lower T favors spontaneity
+unfavorable
+favorable
Spontaneous only if |∆H| < |T∆S|higher T favors spontaneity
84
![Page 85: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/85.jpg)
What is ∆G = 0?• If ∆Gº < 0 the reaction is spontaneous• if ∆Gº > 0 the reaction is not spontaneous• What is ∆G = 0 ?✓Equilibrium✓For now, we’ll define equilibrium as the point
at which a reversible reaction “stops.”✓There is no “net” movement of the reaction
in the forward direction or the reverse direction − No changes of concentrations or amounts of reactants or products.
85
85
![Page 86: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/86.jpg)
The reaction below is NOT spontaneous at 298 K. Without making any calculations, is there a temperature at which this reaction can become spontaneous?2NOCl(g) → 2NO(g) + Cl2(g)
For the reaction: ∆Hº = +74 kJ, ∆Sº = +117 J
1. Yes2. No3. Not enough information to determine.
86
86
![Page 87: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/87.jpg)
The reaction below is NOT spontaneous at 298 K. Without making any calculations, is there a temperature at which this reaction can become spontaneous?2NOCl(g) → 2NO(g) + Cl2(g)
For the reaction: ∆Hº = +74 kJ, ∆Sº = +117 J
1. Yes2. Whenever ∆S is favorable (+), the
possibility exists for a large enough T to make |T∆S| large enough to counteract the unfavorable ∆H
3. No4. Not enough information to determine. 87
87
![Page 88: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/88.jpg)
The reaction below is NOT spontaneous at 298 K. Without making any calculations, is there a temperature at which this reaction can become spontaneous?R → PFor the reaction: ∆Hº < 0 and ∆Sº < 0
1. Yes2. No3. Not enough information to determine.
88
88
![Page 89: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/89.jpg)
The reaction below is NOT spontaneous at 298 K. Without making any calculations, is there a temperature at which this reaction can become spontaneous?X → YFor the reaction: ∆Hº < 0 and ∆Sº < 01. Yes• Whenever ∆S is unfavorable (−), the possibility
exists for a small enough T to make |T∆S| small enough to be overtaken by the favorable ∆H
• Remember, when the sign of ∆S and ∆H are the same, spontaneity can be changed with temperature changes.
2. No3. Not enough information to determine.
89
89
![Page 90: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/90.jpg)
The reaction below is NOT spontaneous at 298 K. Without making any calculations, is there a temperature at which this reaction can become spontaneous?2 A → 3 BFor the reaction: ∆Hº > 0 and ∆Sº < 0
1. Yes2. No3. Not enough information to determine.
90
90
![Page 91: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/91.jpg)
The reaction below is NOT spontaneous at 298 K. Without making any calculations, is there a temperature at which this reaction can become spontaneous?2 A → 3 BFor the reaction: ∆Hº > 0 and ∆Sº < 0
1. Yes2. No• Whenever ∆S(−) and ∆H(+) are both
unfavorable, ∆G can never be spontaneous (−).
3. Not enough information to determine.91
91
![Page 92: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/92.jpg)
When a reaction is happening, we can describe the extent of the reaction with a ratio, Q
2NOCl(g) ⇋ 2NO(g) + Cl2(g)
• Q is called the reaction quotient.• If a reaction “finishes” (goes as far as it can, and
reaches equilibrium), we would now call the ratio K (instead of Q), the equilibrium konstant.✓ Kp in in atmospheres, Kc in molarity
• [ ] refers to molarity ( ) to pressure• Note that the substances are raised to the
power of their coefficient…(not to worry about why just yet.)92
Q = [Cl2 ][NO]2
[NOCl]2
Kp =PCl2( ) PNO( )2
PNOCl( )2Kc =
[Cl2 ][NO]2
[NOCl]2
92
![Page 93: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/93.jpg)
Reversible Reactions
93
Q = Kfavors reactants
reverse reaction proceeds
Q is the reaction quotient. It is a ratio of extent.
Q =[NH 3]
2
[N2 ][H2 ]3
K =[NH 3]
2
[N2 ][H2 ]3
When at equilibrium, we call the reaction quotient, the equilibrium constant, K
favors productsforward reaction proceeds
reverse is spontaneous
forward is spontaneous
Gºreactants0
Gºproducts−33.32
G o
f the
reac
ting
syst
em
extent of the reaction
EquilibriumPosition
∆Gº of this reaction is −33.32 kJ/molrx
93
![Page 94: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/94.jpg)
Reversible Reactions
94extent of the reaction
Q is the reaction quotient. It is a ratio of extent.
K = [SO2 ]2[O2 ]
[SO3]2
K = [SO2 ]2[O2 ]
[SO3]2
G o
f the
reac
ting
syst
em
Q = KEquilibrium
Position
2SO3(g) → 2SO2(g) + O2(g)∆Gº of this reaction is +140 kJ/molrx
Gºproducts−600.8
Gºreactants−740.8
Q > Kreverse reaction proceeds
Q < Kforward reaction proceeds
94
![Page 95: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/95.jpg)
So we know how to calculate ∆Gº at temperatures other than 298 K, (using ∆Gºtemp = ∆Hº − T∆Sº)what if we want to know ∆G at non-standard conditions: pressures other than 1 atm or concentrations other than 1 M?
• We need a new equation….
95
95
![Page 96: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/96.jpg)
So we know how to calculate ∆Gº at temperatures other than 298 K, using ∆Gºtemp = ∆Hº − T∆Sºwhat if we want to know ∆G at non-standard conditions: pressures other than 1 atm or concentrations other than 1 M?The relationship between ∆G and ∆Gº can be calculated with the following mathematical relationship:
∆Gtemp = ∆Gºtemp + RT lnQ9696
![Page 97: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/97.jpg)
∆Gtemp at nonstandardpressure & concentration
• ∆Gtemp = ∆Gºtemp + RT lnQ✓ R = 8.314 J/mole K (the gas constant in energy units)✓ T is always in Kelvin✓ Q is the reaction quotient
‣ Right-side over left side raised to their equation coefficients.
• If temp = 298✓ calculate ∆Gº using ∆GºRx = ∑n∆Gfºprod − ∑n∆Gfºreact
✓ then use formula above to calculate ∆G (nonstandard pressure or concentration
• If temp is something other than 298✓ calculate ∆Gºtemp using ∆Gºtemp = ∆Hº − T∆Sº✓ then use formula above to calculate ∆G (nonstandard pressure or
concentration 97
97
![Page 98: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/98.jpg)
What is ln? Natural Log• ∆Gtemp = ∆Gºtemp + RT lnQ• so what is lnQ?• Find the the ln (not log, base 10) key on your
calculator.• For now we will simply accept that taking the
natural log of Q is a mathematical tool to analyze the progress of the reaction i.e. the difference between the products and reactants.
• This is what we need to do in order to solve the mathematical equation above.
98
98
![Page 99: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/99.jpg)
The following reaction is spontaneous: 2 NO(g) + O2(g) → 2 NO2(g) ∆Gº = −71.2 kJ/rx
∆G under the following pressure conditions: NO = 0.100 atm, O2 = 0.100 atm, NO2 = 2.00 atm, would be
1. more negative2. less negative3. stay the same
99
∆G =∆Gº+RT lnQ
99
![Page 100: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/100.jpg)
The following reaction is spontaneous: 2 NO(g) + O2(g) → 2 NO2(g) ∆Gº = −71.2 kJ/rx
∆G under the following pressure conditions: NO = 0.100 atm, O2 = 0.100 atm, NO2 = 2.00 atm, would
1. more negative2. less negative
• although still spontaneous, but less so3. stay the same
100
∆G =∆Gº+RT lnQ ∆G =∆Gº+RT lnPNO2( )2
PNO( )2 PO2( )⎛
⎝⎜⎜
⎞
⎠⎟⎟
∆G = −71.2 + 0.008314( )× 298( )ln 2( )2
0.1( )2 0.1( )⎛
⎝⎜⎞
⎠⎟
∆G = −50.7kJ
100
![Page 101: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/101.jpg)
natural log Facts
• If products increase, Q >1, ln+, ∆G more positive
• If reactants increase, Q <1, ln−, ∆G more negative
101
ln(# > 1) +
ln(1) 0
ln(# < 1 & bigger than zero) -
∆G = ∆Gº+RT lnQ
101
![Page 102: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/102.jpg)
LeChatelier’s PrincipleA general rule that will help us predict the direction in which an equilibrium reaction will move when the equlibrium is disturbed.
If an external “stress” is applied to a system at equilibrium, the system adjusts in such a way that the “stress” is partially offset as the system reaches a new equilibrium position.
102
102
![Page 103: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/103.jpg)
LeChatelier’s PrincipleWhile the reaction just described, was not at equlibrium, we can use this same principle to guide the expected shift in ∆G change from standard conditions.
If the conditions are different than standard, the ∆G will adjusts in such a way to partially offset different conditions.
103
103
![Page 104: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/104.jpg)
The following reaction is spontaneous: 2 NO(g) + O2(g) → 2 NO2(g) ∆Gº = −71.2 kJ/rx
∆G under the following pressure conditions: NO = 0.100 atm, O2 = 0.100 atm, NO2 = 2.00 atm, would be larger or smaller.
• At standard conditions, Q = 1
• Since the products are greater than 1, and reactants are less than 1, Q will be greater than 1, and lnQ will be positive, then ∆G will end up more positve (less negative) and will “shift” left.
• That is to say be less spontaneous than at standard conditions.
104
∆G =∆Gº+RT lnQ
104
![Page 105: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/105.jpg)
The following reaction is spontaneous: Zn + Cu2+ → Zn2+ + Cu ∆Gº = −212 kJ/mol, Eº = +1.10 VIf we increased the concentration of Cu2+ and decreased the concentration of Zn2+ in the cell, the spontaneity of the reaction would
1. more negative2. less negative3. stay the same
105
105
![Page 106: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/106.jpg)
For the following reaction from a Galvanic cell, ∆Gº298 = −212 kJ/mol Zn + Cu2+ → Zn2+ + CuIf we increased the concentration of Cu2+ and decreased the concentration of Zn2+ in the cell, the spontaneity of the reaction would
1. increase• We can answer this question again by
invoking LeChatelier’s Principle. “Stressing” the reaction by increasing reactants (compared to standard) will increase the “push” to the right to try to relieve that “stress.” Let’s calculate….
2. decrease3. stay the same 106
106
![Page 107: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/107.jpg)
For the following reaction from a Galvanic cell, ∆Gº298 = −212 kJ/mol Eº = 1.10 V
Zn + Cu2+ → Zn2+ + CuCaluculate ∆G if the Galvanic cell was set up with [Cu2+] = 2M and [Zn2+]= 0.1M
107
∆G = ∆Gº+RT lnQ
∆G = ∆Gº+RT ln [Zn2+ ]
[Cu2+ ]
107
![Page 108: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/108.jpg)
For the following reaction from a Galvanic cell, ∆Gº298 = −212 kJ/mol Zn + Cu2+ → Zn2+ + CuCaluculate ∆G if the Galvanic cell was set up with [Cu2+] = 2M and [Zn2+]= 0.1M
• ∆G = −219 kJ more negative, thermodynamically favored108
∆G = ∆Gº+RT ln [Zn2+ ]
[Cu2+ ]∆G = −212kJ + (0.00831kJ )(298)ln [0.1]
[2]
Q <1, thus logQ negative
108
![Page 109: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/109.jpg)
The Relationship between ∆G and K
• ∆Gtemp = ∆Gºtemp + RT lnQ• When at equilibrium,✓ ∆Gtemp = 0, and Q = Keq
• the equation at the top becomes✓ 0 = ∆Gºtemp + RT lnK
• and will reduce to, ✓ ∆Gºtemp = −RT lnK
109
109
![Page 110: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/110.jpg)
Calculate ∆GºT, 300K in kJ/mole for a reaction at 300K in whichKeq = 2.2 x 10−4
Round to the nearest whole number - You may use your calculator.
1. Submit your answer rounded to the nearest whole number.
110
110
![Page 111: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/111.jpg)
Calculate ∆GºT, 300K in kJ/mole for a reaction at 300K in which Keq = 2.2x10−4
Round to the nearest whole number − You may use your calculator.
• ∆Gº = −RT lnK• ∆Gº = −(0.00831 kJ/K)(300K)(ln 2.2x10−4)• +21 kJ/mol or 21,000J/mol
111
111
![Page 112: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/112.jpg)
Using the ∆Hº and ∆Sº previously calculated and the Gibbs Free Energy Formula, use those values to calculate free energy at 1127ºC2SO3(g) → 2SO2(g) + O2(g)
∆GºT=1400 = −69kJCalculate K for this reaction at this temp
112
112
![Page 113: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/113.jpg)
Using the ∆Hº and ∆Sº previously calculated and the Gibbs Free Energy Formula, use those values to calculate free energy at 1127ºC2SO3(g) → 2SO2(g) + O2(g)
∆GºT,1400 = −69kJ∆GºT,1400 = −RT lnK-69 kJ = −(0.00831 kJ)(1400K)lnK
K = 377, large, thermodynamically favored as you would expect by the negative ∆G
113
−69− 0.00831( )(1400) = lnK e
−69− 0.00831( )(1400) = K
113
![Page 114: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/114.jpg)
Need more practicewith your calculator? Calculate K for a reaction in which
1. ∆Gº = −4
2. ∆Gº = +12
3. ∆Gº = 0
114
∆Gº− 0.00831( )(298) = lnK
∆Gº= −RT lnK
e∆ G º
− 0.00831( )(298) = K
114
![Page 115: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/115.jpg)
Need more practicewith your calculator? Calculate K for a reaction in which
1. ∆Gº = −4• K = 5
2. ∆Gº = +12
• K = 0.0079
3. ∆Gº = 0
• K = 1115
∆Gº− 0.00831( )(298) = lnK
∆Gº= −RT lnK
e∆ G º
− 0.00831( )(298) = K
115
![Page 116: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/116.jpg)
Calculate the free energy at 25ºCC6H12O6 + 6O2 → 6CO2(g) + 6H2O(L)
∆GºT,298 = −2879 kJCalculate K for this reaction at 25ºC
116
116
![Page 117: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/117.jpg)
Calculate the free energy at 25ºCC6H12O6 + 6O2 → 6CO2(g) + 6H2O(L)
∆GºT,298 = −2879 kJCalculate K for this reaction at 25ºCK = 8 x 10520 (this is ridiculously huge!!)
On most calculators, this will give you an error readout, because most calculators will only produce scientific notation up to 1099
117
117
![Page 118: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/118.jpg)
Relationship of ∆G and K•∆Gºtemp = −RT ln Keq
• If ∆Gº < 0 then K > 1✓ natural log of any number larger than 1 is a positive #
• If ∆Gº = 0 then K = 1 (lnK = 0)✓ Since at standard conditions 1 M and 1 atm✓ and natural log of 1 = 0
• If ∆Gº > 0 then K < 1 ✓ natural log of any number smaller than 1 is a negative #
118
118
![Page 119: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/119.jpg)
Free Energyand
Electrical EnergyThe relationship between
∆G and Ecell
Wrapping up the end of chapter 20
119119
![Page 120: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/120.jpg)
Free Energy, ∆Gand Electrochem, E
• Remember, a reaction is thermodynamically favored when✓ Ecell > 0✓ ∆Grxn < 0✓ A more positive Ecell gives rise to a more negative ∆G
• Ecell is measured in V, volts✓ 1 volt = 1 Joule per coulomb✓ A coulomb is the charge on 6.242 x 1018 electrons
120
120
![Page 121: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/121.jpg)
∆Gº = −nF Eº• Consider why the need for the negative sign✓ ∆G is negative = spontaneous✓ E is positive = spontaneous
• ∆G = free energy✓ usually kJ mol−1
• n = mole of electrons transferred• F = the Faraday, 96,485 coulombs/mol e−
• E = potential (voltage), joules/coulomb
121
121
![Page 122: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/122.jpg)
Effect of Concentration on Cell Potential, EDon’t write….just watch.
• Remember
• and we now know
• substitute
• divide through by −nF
122
∆G = ∆Go + RT lnQ
∆Go = −nFEo
−nFE = −nFEo + RT lnQ
E = Eo −RTnFlnQ
E = Eo − 0.0592n
logQmany texts convert natural log to base 10 log: multiply by 2.303
E = Eo − 0.0257n
lnQE = Eo −8.314 J
molK× 298K
n × 96,485 coulmol e−
lnQ remember, a J/coul = Volt
122
![Page 123: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/123.jpg)
For the following reaction from a Galvanic cell Zn + Cu2+ → Zn2+ + Cu Eº = 1.10 VCaluculate E if the Galvanic cell was set up with [Cu2+] = 2M and [Zn2+]= 0.1M
123
123
![Page 124: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/124.jpg)
For the following reaction from a Galvanic cell Zn + Cu2+ → Zn2+ + Cu Eº = 1.10 VCaluculate E if the Galvanic cell was set up with [Cu2+] = 2M and [Zn2+]= 0.1M
124
E = Eo − 0.0257n
ln [Zn2+ ]
[Cu2+ ]
E = 1.10 − 0.02572
ln [0.1][2]
= 1.14V
• more positive, thermodynamically favored
Q <1, thus lnQ, negative
124
![Page 125: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/125.jpg)
Electrochem and EquilibriumDon’t write….just watch.
• Now you know, ∆Gº = −nFEº• Remember ∆Gº = −RT lnKeq
• Now combine these two equations✓ −RT lnK = −nFEº then solve for Eº
• Units:‣ R = 8.314 J/molRxn K‣ T = temperature in Kelvin‣ n = number of electrons transferred, per moleRxn, unitless ratio‣ F = the Faraday, 96,485 C/mol‣ K = the equilibrium constant, unitless 125
Eo =RTnFlnK
125
![Page 126: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/126.jpg)
• The reality is that many K values are very large or very small and expressed to the power of 10 so it is convenient to convert natural log to base 10 log
• ln K to log K: logx = 2.303 lnx
126
Eo =RTnFlnK
Eo = 2.3038.314 J
molRx iK⎛⎝⎜
⎞⎠⎟ 298K( )
n mol of e−
molRx⎛⎝⎜
⎞⎠⎟
96,500 coulmol of e−
⎛⎝⎜
⎞⎠⎟
logK
Eo =0.0592V
nlogK
by definition 1 V = 1J/coul
Eo = 0.0257Vn
lnK
Electrochem and EquilibriumDon’t write….just watch.
E = Eo − 0.0592n
logQ
• Further, at equilibrium, E = 0
thus
126
![Page 127: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/127.jpg)
Consider a lead / silver voltaic cell made with each metal and their respective nitrate solutions at room temperature, 25ºC.
1. Write the balanced net ionic equation and calculate the voltage, Eº
2. Calculate free energy, ∆Gº
3. Calculate the equilibrium constant, K
127
half-reaction Eº (V)Ag+ + 1e− → Ag 0.80
Pb2+ + 2e− → Pb -0.13
127
![Page 128: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/128.jpg)
Consider a lead / silver voltaic cell made with each metal and their respective nitrate solutions.
1. Write the balanced net ionic equation and calculate the voltage, Eº
• Pb + 2Ag+ → Pb2+ + 2Ag• Eºcell = 0.93 V
2. Calculate free energy, ∆Gº• ∆Gº = −179 kJ/mol
128
∆Go = −nFEo
∆Go = −(2mole−) 96,485 coulmole−
⎛⎝⎜
⎞⎠⎟ 0.93 Joule
coul⎛⎝⎜
⎞⎠⎟
half-reaction Eº (V)Ag+ + 1e− → Ag 0.80Pb2+ + 2e− → Pb -0.13
128
![Page 129: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/129.jpg)
Consider a lead / silver voltaic cell made with each metal and their respective nitrate solutions.
1. Write the balanced net ionic equation and calculate the voltage, Eº
• Pb + 2Ag+ → Pb2+ + 2Ag
• Ag Eºred = 0.80 V Pb2+ Eºox = 0.13 V Eºcell = 0.93 V• ∆Gº = −179 kJ/mol
3. Calculate the equilibrium constant, K
4. solve for K = 2.97 x 1031
129
lnK = −180kJ mol0.00831kJ mol K −1( ) 298K( )
lnK = 72.5
∆Go = −RT lnK
129
![Page 130: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/130.jpg)
Electrochem, Equilibrium, Free Energy
130
Eºcell K
∆Gº
Eo =0.0592n
logK
∆G o= −RT lnK∆G
o = −nFEo
Reaction Parameters at Standard StateReaction Parameters at Standard StateReaction Parameters at Standard StateReaction Parameters at Standard State∆Gº K Eºcell reaction at standard state is
130
![Page 131: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/131.jpg)
Electrochem, Equilibrium, Free Energy
131
Eºcell K
∆Gº
∆G o= −RT lnK∆G
o = −nFEo
Reaction Parameters at Standard StateReaction Parameters at Standard StateReaction Parameters at Standard StateReaction Parameters at Standard State∆Gº K Eºcell reaction at standard state
− > 1 + spontaneous0 1 0 at Equlibrium+ < 1 − nonspontaneous
Eo =0.0592n
logK
131
![Page 132: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/132.jpg)
In which of the following conditions can you be sure about the spontaneity of a reaction?
132
∆H ∆S1 + +2 + -3 - -4 - +
132
![Page 133: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/133.jpg)
In which of the following conditions can you be sure about the spontaneity of a reaction? • For # 2 we know that it
will never be spontaneous since both ∆H and ∆S are unfavorable.
• For # 4 we know that it will always be spontaneous since both ∆H and ∆S are favorable. 133
∆H ∆S1 + +2 + -3 - -4 - +
133
![Page 134: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/134.jpg)
Select the set of thermodynamic parameters that best describes the system below at room conditionsH2O(s) ⇋H2O(L)
134
∆G ∆H ∆S ∆Volume
1 0 > 0 > 0 > 02 0 > 0 < 0 03 < 0 > 0 < 0 < 04 < 0 > 0 > 0 < 05 < 0 < 0 > 0 > 06 < 0 > 0 > 0 > 0
134
![Page 135: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/135.jpg)
Select the set of thermodynamic parameters that best describes the system at room conditionsH2O(s) ⇋H2O(L)
135
∆G ∆H ∆S ∆Volume
1 0 > 0 > 0 > 02 0 > 0 < 0 03 < 0 > 0 < 0 < 04 < 0 > 0 > 0 < 05 < 0 < 0 > 0 > 06 < 0 > 0 > 0 > 0
135
![Page 136: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/136.jpg)
Calculating ∆Sfor phase changes
136136
![Page 137: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/137.jpg)
At what temperature is this process at equilibrium? H2O(g) ⇋H2O(L)
• What temperature does ice melt?• What temperature does water
freeze?• At 0ºC, water can do either,
depending on whether or not energy is entering or exiting the system.
• If no heat is transfering, the system is at equilibrium
137
137
![Page 138: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/138.jpg)
Using Boiling and Melting points to calculate ∆S
• When a substance is at its normal boiling or melting temperature it is at equilibrium.
• And at equilibrium ∆G = 0• Since ∆G = ∆Hº − T∆Sº• T∆Sº = ∆Hº• So the ∆S of melting or boiling = ∆H/T✓ This is one method of calculating entropy for some
substances.138
138
![Page 139: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/139.jpg)
The molar heat of fusion, ∆Hfus, for water is 6.01 kJ mol-1. Which expression gives the molar entropy of fusion, ∆Sfus, in kJ K-1 mol-1 for ice at its normal melting point?
1. ∆Sfus = 6.01 x 4.182. ∆Sfus = 6.01 x 2733. ∆Sfus = 6.01 x 298
4. ∆Sfus =
5. ∆Sfus =
139
6.012736.01298
139
![Page 140: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/140.jpg)
The molar heat of fusion, ∆Hfus, for water is 6.01 kJ mol-1. Which expression gives the molar entropy of fusion, ∆Sfus, in kJ K-1 mol-1 for ice at its normal melting point?
1. ∆Sfus = 6.01 x 4.182. ∆Sfus = 6.01 x 2733. ∆Sfus = 6.01 x 298
4. ∆Sfus =
5. ∆Sfus =
140
6.01298
6.01273
140
![Page 141: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/141.jpg)
More Practice
141141
![Page 142: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/142.jpg)
Consider the gas phase equilibrium 2CO + O2 ⇋ 2CO2 at 25ºCK = 11.1 Calculate ∆G
1. 500 kJ
2. 0.500 kJ
3. 5.96 kJ
4. 5960 kJ
5. −500 kJ
6. −0.500 kJ
7. −5.96 kJ
8. −5960 kJ142
142
![Page 143: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/143.jpg)
Consider the gas phase equilibrium 2CO + O2 ⇋ 2CO2 at 25ºCK = 11.1 Calculate ∆G
1. 500 kJ2. 0.500 kJ3. 5.96 kJ4. 5960 kJ
5. −500 kJ6. −0.500 kJ7. −5.96 kJ8. −5960 kJ
143
∆G = −RT lnK ∆G = − 0.00831kJ / K( )(298K )(ln11.1)
143
![Page 144: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/144.jpg)
Which apply to any reaction that proceeds spontaneously to form products from initial standard conditions.1. ∆G < 02. Keq > 13. ∆H < 04. ∆S > 0
144
144
![Page 145: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/145.jpg)
Which apply to any reaction that proceeds spontaneously to form products from initial standard conditions.1. ∆G < 0
• because we know that if the reaction proceeds (spontaneous) it must have a negative ∆G.
2. Keq > 1• because we know at standard conditions of 1 atm, 1M K
would always = 1, so if the reaction proceeds K will end up greater than 1 since as the reaction proceeds products will increase and reactants will decrease resulting in K larger than 1.
3. ∆H < 04. ∆S > 0 145
145
![Page 146: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/146.jpg)
Can every and any non spontaneous reaction be made spontaneous at some temperature?1. yes2. no3. I don’t know, and I would just be
guessing or following my neighbors, but I don’t really know how to analytically think through to an answer.
146
146
![Page 147: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/147.jpg)
Can every and any non spontaneous reaction be made spontaneous at some temperature?1. yes2. no, remember: ∆G = ∆H − T∆S
• When ∆H is +, and ∆S is −, NO temperature will ever make the reaction spontaneous
• If ∆H is + and ∆S is +,✓ increasing the T will at some (even if theoretical)
temp make |T∆S| > |∆H| resulting in ∆G < 0
• If ∆H is − and ∆S is −,✓ decreasing the T will at some temp
make |T∆S| < |∆H| resulting in ∆G < 0147
147
![Page 148: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/148.jpg)
For a spontaneous reaction, what happens to the value of ∆G as a reaction proceeds?1. gets more negative2. gets less negative3. stays the same
148
148
![Page 149: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/149.jpg)
For a spontaneous reaction, what happens to the value of ∆G as a reaction proceeds?1. gets more negative2. gets less negative3. stays the same
149
149
![Page 150: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/150.jpg)
The reaction below is not spontaneous at room condition but becomes spontaneous at higher temperatures. 2C(g) → A(g) + 3B(g) Which one of the following is true at 298 K (room temp)?
1. ∆G, ∆H, and ∆S are all positive2. ∆G, ∆H, and ∆S are all negative3. ∆G and ∆H are positive, but ∆S is negative4. ∆G and ∆S are positive, but ∆H is negative5. ∆G and ∆H are negative, but ∆S is positive6. ∆G and ∆S are negative, but ∆H is positive7. ∆G is positive, but we can not know about the sign
of ∆S or ∆H 8. ∆G is negative, but we can not know about the sign
of ∆S or ∆H 150
150
![Page 151: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/151.jpg)
The reaction below is not spontaneous at standard conditions but becomes spontaneous at higher temperatures. 2C(g) → A(g) + 3B(g) Which of the following is true at 298 K?1. ∆G, ∆H, and ∆S are all positive
• at 298 K, not spontaneous means G +• when ∆S is positive, the |T∆S| factor will increase at higher
temperatures and since the equation is, − T∆S, at some temp the |T∆S| factor will be greater than the |∆H| and the value of ∆G will become negative.
2. ∆G, ∆H, and ∆S are all negative3. ∆G and ∆H are positive, but ∆S is negative4. ∆G and ∆S are positive, but ∆H is negative5. ∆G and ∆H are negative, but ∆S is positive6. ∆G and ∆S are negative, but ∆H is positive7. ∆G is positive, but we can not know about the sign of ∆S or ∆H 8. ∆G is negative, but we can not know about the sign of ∆S or ∆H 151
151
![Page 152: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/152.jpg)
Which parameters below correctly describe the condensation of water on the inside of your car windshield on a cold morning. Select all that apply.
1. ∆G < 02. ∆H < 03. ∆S < 0 4. ∆V < 0
152
152
![Page 153: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/153.jpg)
Which parameters below correctly describe the condensation of water on the inside of your car windshield on a cold morning. Select all that apply.1. ∆G < 0• indeed this is a spontaneous reaction, you’ve seen it
happen as you are trying to see through the windshield while driving to school.
2. ∆H < 0• vaporization is endothermic, condensation is exothermic3. ∆S < 0 • liquid has less entropy than the gas4. ∆V < 0• the liquid takes up less space than its gas
153
153
![Page 154: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/154.jpg)
∆H for the reaction below is negativeN2(g) + 3H2(g) → 2NH3(g) ∆H = −97kJWhich is larger, the bond dissociation value of the reactants or products?
1. reactants2. products3. depends on other factors and cannot
be determined with the given information
154
154
![Page 155: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/155.jpg)
∆H for the reaction below is negativeN2(g) + 3H2(g) → 2NH3(g) ∆H = −97kJWhich is larger, the bond dissociation value of the reactants or products?1. reactants2. products• Without looking up and dissocation values,
we know that bond forming, exothermic must be greater than bond breaking in order for the ∆H of the reaction to be negative, exothermic.
3. depends on other factors and cannot be determined with the given information
155
155
![Page 156: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/156.jpg)
Consider the disorder of the following reactions and select the choice for which the sign of ∆S is INCORRECT.Select all that apply.1. H2O(s) → H2O(L) ∆S − 2. Ag+(aq) + Cl−(aq) → AgCl(s) ∆S − 3. CaO(s) + CO2(g) → CaCO3(s) ∆S − 4. 2SO2(g) + O2(g) → 2SO3(g) ∆S +5. 2Fe2O3(s) → 4Fe(s) + 3O2(g) ∆S +
156
156
![Page 157: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/157.jpg)
Consider the disorder of the following reactions and select the choice for which the sign of ∆S is INCORRECT.Select all that apply.1. H2O(s) → H2O(L) ∆S − 2. Ag+(aq) + Cl−(aq) → AgCl(s) ∆S − 3. CaO(s) + CO2(g) → CaCO3(s) ∆S − 4. 2SO2(g) + O2(g) → 2SO3(g) ∆S +5. 2Fe2O3(s) → 4Fe(s) + 3O2(g) ∆S +
157
157
![Page 158: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/158.jpg)
Choose the pair of samples of matter that correctly compares their entropy values. Select all that apply.
158
The entropy of is the entropy of1 HCl(g) at 25º < Na2SO4(s) at 25º
2 H2O(L) at 25º < H2O(L) at 50º
3 Ne(g) at 25º < Ar(g) at 25º
4 NO2(g) at STP < N2O4(g) at STP
5 N2(g) + 3H2(g) at STP < 2NH3(g) at STP
158
![Page 159: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/159.jpg)
Choose the pair of samples of matter that correctly compares their entropy values. Select all that apply.
159
The entropy of is the entropy of1 HCl(g) at 25º < Na2SO4(s) at 25º
2 H2O(L) at 25º < H2O(L) at 50º
3 Ne(g) at 25º < Ar(g) at 25º
4 NO2(g) at STP < N2O4(g) at STP
5 N2(g) + 3H2(g) at STP < 2NH3(g) at STP
159
![Page 160: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/160.jpg)
Select the thermodynamic quantity below that is negative for any exothermic reaction. Select as many as apply.
1. Keq
2. ∆G 3. ∆H 4. ∆S 5. ∆V (volume)
160
160
![Page 161: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/161.jpg)
Select the thermodynamic quantity below that is negative for any exothermic reaction. Select as many as apply.
1. Keq
2. ∆G 3. ∆H 4. ∆S 5. ∆V (volume)
161
161
![Page 162: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/162.jpg)
Select the thermodynamic quantity below that is always positive for all reactions. Select as many as apply.
1. Keq
2. ∆G 3. ∆H 4. ∆S 5. ∆V (volume)
162
162
![Page 163: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/163.jpg)
Select the thermodynamic quantity below that is always positive for all reactions. Select as many as apply.
1. Keq
2. ∆G 3. ∆H 4. ∆S 5. ∆V (volume)
163
163
![Page 164: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/164.jpg)
Select the thermodynamic quantity below that can be negative for spontaneous reactions. Select as many as apply.
1. Keq
2. ∆G 3. ∆H 4. ∆S 5. ∆V (volume)
164
164
![Page 165: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/165.jpg)
Select the thermodynamic quantity below that can be negative for spontaneous reactions. Select as many as apply.
1. Keq• Keq is never a negative value
2. ∆G (must be)3. ∆H4. ∆S5. ∆V (volume)
165
165
![Page 166: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/166.jpg)
∆Gfº for NO = +87 kJ/mol∆Gfº for NO2 = +52 kJ/molSelect the true statement(s) below.1. The formation of NO will occur faster
than the formation of NO2.2. NO2 is more stable than NO.3. NO + ½O2 → NO2 is a spontaneous
reaction.4. The formation of NO2 is spontaneous
at all reaction temperatures.5. NO → N2 + ½O2 is spontaneous 166
166
![Page 167: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/167.jpg)
∆Gfº for NO = +87 kJ/mol∆Gfº for NO2 = +52 kJ/molSelect the true statement(s) below.1. The formation of NO will occur faster
than the formation of NO2.2. NO2 is more stable than NO.3. NO + ½O2 → NO2 is a spontaneous
reaction.4. The formation of NO2 is spontaneous
at all reaction temperatures.5. NO → N2 + ½O2 is spontaneous 167
167
![Page 168: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/168.jpg)
When two solutions are combined and a precipitate forms, the solution cools. Which describes the value of ∆G, and its components?1. ∆G < 0, |∆H| > |T∆S|2. ∆G < 0, |∆H| < |T∆S|3. ∆G > 0, |∆H| > |T∆S|4. ∆G > 0, |∆H| < |T∆S|5. ∆G = 0, |T∆S| = |∆H|
168
168
![Page 169: From Thermochemistry to Thermodynamics](https://reader031.fdocuments.in/reader031/viewer/2022012502/617b3e49b6b526486a770813/html5/thumbnails/169.jpg)
When two solutions are combined and a precipitate forms while the solution cools. Which describes the value of ∆G, and its components?1. ∆G < 0, |∆H| > |T∆S|2. ∆G < 0, |∆H| < |T∆S|• Since we know that the solution cools, we know that ∆H is
positive, and since that is an unfavorable factor the S must be driving the reaction, thus ∆S must be positive.
• although it is completely counter intuitive, the driving force for this reaction must be an increase in entropy,
• and for the reaction to be spontaneous (∆G<0), the |T∆S| factor must be larger than the |∆H| factor.
3. ∆G > 0, |∆H| > |T∆S|4. ∆G > 0, |∆H| < |T∆S|5. ∆G = 0, |T∆S| = |∆H|
169169