From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George...

35
From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer
  • date post

    19-Dec-2015
  • Category

    Documents

  • view

    222
  • download

    1

Transcript of From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George...

Page 1: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

From Pixels to ProjectsUnderstanding and Using Digital Photographyby Jessica Heldman and George Privateer

Page 2: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

What you’ll learn today

• The basics of how a digital camera works

• What to look for in a digital camera and how to choose the right one for you

• How to take the best possible picture

• The basics of digital photo adjustment

• How to set up your photos for laser engraving

Page 3: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Digital Camera 101

Page 4: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

How digital cameras work

• At the most basic level, a digital camera works much the same as a film-camera– The camera captures images through a series of lenses that

bounce light off a subject.

• Where digital cameras differ is in the image processing– Film cameras process images chemically…heck, you don’t

even need electricity to operate a camera!– Digital cameras convert images into a series of 0’s and 1’s that

represent the tiny colored dots, or pixels, that make up the image.

– The number of pixels a digital camera can copy makes up the cameras resolution.

Page 5: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

“Learning the lingo”

Here are some of the basic digital camera terms we’ll beusing throughout the presentation:

• Resolution: Refers to the number of pixels a digital camera can capture. Can be stated as either 3 mega pixel, 3 MP, or 2048 x 1536. Resolution is the most common term used to differentiate digital cameras.

• Aperture: Refers to the size of the opening of the lens and how much light gets to the digital camera sensor.

• Shutterspeed: Refers to how long the sensor is exposed to light.

• Memory: How a camera stores images. Can be internal and external. Also referred to as storage.

Page 6: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

“Learning the lingo”

• Zoom: How the camera “zooms” in on an object. Can be either digital or optical.

• White balance: Tells the camera what elements of a photo should look white, and, in turn, what should look black and all colors in between. Can be automatic or manual.

• LCD: Short for Liquid Crystal Display. It is the screen on the back of most digital cameras that allows you to preview photos.

• File format (type): Refers to the type of digital file the camera will save images as. Most common are .jpeg, .tiff and RAW.

• File size: Refers to the size of each photo taken. This will vary based on resolution and file format.

Page 7: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Picking the right camera for you

Page 8: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

What do I want?

There are literally thousands of options available in digital cameras. When choosing a camera, you should focus on what I call The Big Three:

Resolution

Zoom

“Feel”

Page 9: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Resolution

• When choosing a camera, here is an easy way to determine what resolution you should be looking for:– 2-mega pixel (2 million pixels) cameras can create prints up to

4” x 5” that are similar in quality to a photo lab print. This camera would be fine for small sublimation jobs.

– 3-mega pixel cameras can make decent 8” x 10” prints. This would be a good camera for sublimation and some photo lasering.

– 4-mega pixel cameras can make very nice 11” x 17” prints, and still hold good quality up to 16” x 20”. 4-mega pixel is the current standard resolution, and would suit all sublimation and most photo lasering jobs. Also allows for better image quality after cropping in a photo-editing software package.

– 5-mega pixel and up cameras will produce very large 20” x 24” prints with no loss of quality.

Page 10: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Zoom

• As stated earlier, there are two types of zoom in digital cameras: optical and digital.– Optical zoom means the lens does the work.– Digital zoom means the computer processor does the work.

• Optical zoom will produce better results, as the zoom happens before the image is captured.

• Digital zoom simply magnifies the pixels of the zoom area after the image has been captured.

• Buyer beware! Cameras often list Optical and Digital zoom together for a total camera zoom. The more optical zoom, the better.

Page 11: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

“Feel”

• This is the totally subjective part of the evaluation process.

• If possible, use the camera before you buy.– How does it feel in your hand?– How easy is it to access the camera settings?– Is the LCD screen bright enough?– Is the camera menu intuitive?

• While a camera might have all the features you are looking for, if it’s not comfortable to use, don’t buy it! Being happy with the camera is the most important “user feature”!

Page 12: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Other considerations

• Battery type– Digital cameras are battery hogs. If possible, buy one with a

rechargeable battery or buy rechargeable batteries separately. And always buy extras!

• Exposure controls– If you want to adjust the aperture and white balance manually,

look for manual controls. Most cameras offer some level of control, with the more expensive models offering more control.

• Memory– Your camera should come with some sort of removable

memory, such as SmartMedia or Compact Flash cards. You’ll want to add additional memory to store photos, so make sure you know what kind of memory your camera takes.

Page 13: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Things to avoid

• “Digital zoom only” cameras– Digital zoom doesn’t give you enough flexibility and decreases image

resolution and quality.

• Cameras that use floppy disks or CD’s– Believe it or not, there are still cameras that use floppy disks and CD-

ROMS for storage. They are often bulky and slow. Avoid these if at all possible.

• Memory card readers– They sound like a good idea, but memory card readers can be unstable

and accidentally erase your memory card, particularly multi-format memory card readers. It’s best to just hook your camera up directly to your PC.

• Basing your decision on video capability– Most digital cameras today offer the ability to capture video. While this

sounds like a nice feature, video files take up A LOT of memory card space, and the video files themselves are often poor quality. Get a dedicated video camera for video projects.

Page 14: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Our recommendations

• A camera with 4-mega pixels.

• A camera with at least 2x optical zoom.

• A camera with an easy-to-navigate menu system.

• A camera with removable memory (SmartDisk or Compact Flash).

Page 15: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Ready…set…shoot!

Page 16: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Taking the best picture possible

• Besides your camera, the most important element to the success of your photo is….

LIGHTING, LIGHTING, LIGHTING!

Page 17: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Taking the best picture possible

• Remember: a photo is really an image of the light reflected through the lens of the camera.

• While the built-in flash for your camera provides some illumination, you may want to consider an external flash.

• At the very least, add some of your own artificial light through additional lamps.

• Not only does poor lighting cause shadows, but it will also throw off your cameras white balance, giving you inconsistent color.

Page 18: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Some helpful lighting tips

• When taking pictures of people outdoors, try to take the photo between 11am and 2pm, with the subject facing the sun. The sun is high enough in the sky to adequately light the subject and will minimize squinting.

• In low-light situations, increasing the aperture on your camera will increase the amount of light the lens lets in, and will help your picture quality.

• Even small work lamps will help light a subject indoors. Have the subject face the light, and tilt the lamp either toward the ceiling or toward the floor to avoid “washing out” your subject.

• If you do a lot of product photography for catalogs or mailings, consider purchasing a light box.

Page 19: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Other tips for great photos

• Stabilize your image with a tripod. Tripods with built-in levels can cost less than $50, and will improve the quality of your photos.

• Keep a lens cloth handy. There are cloths made especially for digital cameras, although a lint-free eyeglasses cloth will do fine and probably cost less.

• Is your background too dark out? Try increasing the ISO speed. This will increase the sensitivity of the image sensor in your camera, and will bring the background into better focus. However, your camera will be more sensitive to movement, so this would be a good time to use a tripod.

Page 20: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Other tips for great photos

• When you are shooting a subject that is far away, such as a performer on stage, don’t use your flash. A typical internal flash illuminates up to 6’. This means the subjects in the foreground will be brightly lit, while the subject on stage will be in the dark.

• While the LCD screen is a great tool on digital cameras, don’t forget about the viewfinder. The viewfinder is a true representation of what you are shooting, as it looks directly through the lens. You’ll be able to detect shadows and other minor imperfections better through the viewfinder.

Page 21: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

After you take the picture

Page 22: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Basic photo correcting on a PC

• For the purposes of this presentation, we will refer to features in Corel Photo-Paint 11. All image editing software (like Adobe Photoshop and Paint Shop Pro) has similarly named features that will perform the same functions.

• Once your image is loaded on to your computer, you may still need to make some adjustments.

• Corel Photo-Paint 11 is pretty smart. Seven times out of ten, image imperfections can be fixed by using the “Auto Equalize” function. – This will automatically adjust the basic parameters of the photo based

on the white balance of the image.

– Remember, Photo-Paint is going to look for the color “white” in the image and base all of its color corrections off of that measure.

Page 23: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Basic photo correcting on a PC

• When the Auto Equalize doesn’t quite do it:– Start with adjusting Brightness/Contrast/Intensity

• Usually, making an image slightly brighter will help you determine what colors need to be adjusted.

• Beware! Don’t make your image too bright or it will throw off the rest of your colors.

• Once you’ve adjusted the Brightness/Contrast/Intensity, try the Auto Equalize again. This time, you might get the results you want.

– Adjusting the Color Balance• If you take a photo with a predominate color in the background,

you may see other objects in the image taking on this colors characteristics (I.e. – A person in a photo with a bright green background might have a slight green tint to them).

• Use Color Balance to tame certain colors or make others more prominent.

Page 24: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Laser engraving your photo

Page 25: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

“Learning the lingo”

Here are some of the basic laser engraving terms we’ll beusing throughout the remainder of the presentation:

• Halftones: Refers to how the laser sees your photograph. Halftones are the series of small black dots that simulate the gray tones of a photograph. In order for a laser to read a photo, it must be converted to grayscale.

• DPI: Dots Per Inch. How many small black dots (halftone dots) there are per inch of a photo. The higher the DPI, the sharper the image (as far as the laser is concerned).

• LPI: Lines Per Inch. A term that originated in newspaper printing, it also affects the quality of the image. Halftone images have a maximum LPI of 150.

• PPI (for your laser): Pulse Per Inch. How many times in an inch that a laser will fire. A PPI of 1000 means the laser will fire 1000 in an inch.

Page 26: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Halftones and you

• When you look at a photo in a magazine or newspaper, you eyes see a continuous grey image.

• In reality, it is a series of black dots that get smaller or bigger, depending on the shading of the image. When printers make a “halftone screen”, they are creating the illusion of shades of grey.

• Your laser, in raster mode, sees your photo as a series of black dots, and engraves all of those little dots at different sizes to recreate the image on your substrate.

• The key to achieving a good reproduction of the original image is to render the halftone dots accurately!

Page 27: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Digital camera settings

• Set the image quality of your digital camera to the best image quality available.– You’ll probably be saving the picture at a higher resolution than your

laser needs, but it is better to resize the picture down then to try and enlarge it. You will end up with better lasering results.

• Once you’ve downloaded the picture, import it in to the image editing software of your choice.– For the purposes of this presentation, we will refer to features in Corel

Photo-Paint 11. All image editing software (like Adobe Photoshop and Paint Shop Pro) has similarly named features that will perform the same functions.

• Under the Image/Resample menu, adjust the image to the size you want. You can also adjust the DPI at this time.– NOTE: Photo lasering can be done between 72 and 300 DPI (180 to

250 is recommended). An image DPI more than 300 will dramatically increase the file size, but not improve the rendering of your halftone screen.

Page 28: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Rotary engraving a photo

• A rotary engraving system uses three axis –

X, Y, and Z.• The software that drives the engraver is designed to

move from one point to another along a “vector” or line.• The engraver was not designed to recognize each pixel

of a gray scale image. If that were the case, it would have to raise and lower for each pixel, and engraving would take hours or days to complete.

• The laser was designed to pulsate at short intervals very quickly, thereby re-creating the gray scale image.

Page 29: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Setting up your picture for the laser

• After resizing, convert your image to grayscale. Do this under Image/Color Mode/Grayscale.– Check the brightness of the image after conversion to

grayscale. If the image is too dark, your laser will have to remove a lot of the cap layer of your substrate, which can cause overheating, warping, and loss of image quality. If the image is too light, your laser will not cut through enough of the cap and the image will appear faint.

– Adjusting the contrast of the image may make the grayscale image more defined. The best way to see if this helps is to play with the contrast setting.

• The ultimate goal is to have the image on your screen look as close as possible to the desired outcome.

Page 30: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Basic laser settings

• For the best possible engraving, use the smallest available lens size.– A 1.5” lens produces a beam that is .003” in diameter, meaning

it will be able to render extremely small dots in your halftone.

• In general, combining this small lens size with a laser software setting of 1000 DPI and 1000 PPI will give you the greatest potential for success and rendering a detailed halftone screen.

• The more accurately the halftone dot is rendered, the clearer and sharper the image will be.

Page 31: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Source and reference materials

Page 32: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Sources

• Howstuffworks:– http://electronics.howstuffworks.com/digital-camera.htm

• Yahoo! Shopping– http://shopping.yahoo.com

• CNET Reviews– http://reviews.cnet.com/4520-10165_7-5512377-1.html?tag=txt– http://reviews.cnet.com/4520-11244_7-5535981-5.html?tag=nav

• Olympus Cameras– http://www.olympusamerica.com/cpg_section/cpg_tipstricks.asp

• Digital Camera HQ– http://www.digitalcamera-hq.com/hqguides/top-ten.html

• Rowmark’s Laser Guide Online– http://www.rowmark.com/MARK/laser_guide/start.asp

Page 33: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

elementswww.animationfactory.com

Page 34: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

Your Topic Goes Here

• Your Subtopics Go Here

Page 35: From Pixels to Projects Understanding and Using Digital Photography by Jessica Heldman and George Privateer.

TRANSITIONAL PAGE