from HIROSE ELECTRIC CX90MWD2 Series · 2019. 1. 21. · Hirose Electric Co., LTD • •...
Transcript of from HIROSE ELECTRIC CX90MWD2 Series · 2019. 1. 21. · Hirose Electric Co., LTD • •...
Hirose Electric Co., LTD • www.hirose.com • US-CX90M16P-DS-18-270-1.0 / Issued October 2018
DATA SHEETfrom HIROSE ELECTRIC
◗◗◗◗
Waterproof USB Type-C (Mid-mount)
CX90MWD2 Series
Components
Features:◗ Waterproof USB Type-C Receptacle(IPX8 compliant)◗ Robust design with deep drawing shell◗ Reduced product volume by 22% compared to competition◗ Improved peeling strength using 6 THR* mounting posts◗ USB Type-C compliant interface connector◗ Reversible plug orientation ensures easy insertion* Through-Hole-Reflow
ALL RIGHTS RESERVEDALL R
IGHTS RESERVED
Bottom shell
Potting
Inner shell
Top shell
Insulator
Mid-plate
Contact
Improved Peeling Strength
Waterproof Design
Improved peeling strength using 6 THR* mounting posts
■ Mounted on the PCB
Mounting
*THR is also known as PIP(Pin-in-Paste) process, a method to solder components with through holeleads using surface mount (SMT) assembly process steps, enhances manufacturing efficiency.
:
Ground pins
CX90MWD2Mid-plate
Shell
IPX8WATERPROOF
STANDARD
Water-penetration route Water protected location
Case body
Case body
2. Potting
1.Gasket*1
1.Gasket*1
PCB
*1 Customer supplied gasket required for waterproof performance
To prevent water penetration into the case body
To prevent water penetration into the connector interior
IPX8*2 waterproof design
*2 IPX8 waterproof (unmated) test Immersed in 1.5meter of water for 30 minutes
C O N N E C T I N G T H E F U T U R E◗◗◗◗
For additional information please go to https://www.hirose.com/product/en/products/CX/
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
STAY CONNECTED
Hirose Electric Co., LTD • www.hirose.com • US-CX90M16P-DS-18-270-1.0 / Issued October 2018
Pin Assignment
Specifications
Finish, RemarksMaterialComponent
MATERIAL AND FINISH
A12
B1
A1
B12Mid plate
Pin No. A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12
GND TX1+ TX1- Vbus CC1 D+ D- SBU1 Vbus RX2- RX2+ GND
GND RX1+ RX1- Vbus SBU2 D- D+ CC2 Vbus TX2- TX2+ GND
Pin No. B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1
Mid plate
: USB3.1 Super speed+: USB2.0 High speed 480Mbps: Secondary Bus: USB Power Delivery Communication
(MATING SIDE) (SOLDER SIDE)
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12
GND TX1+ TX1- Vbus CC1 D+ D- SBU1 Vbus RX2- RX2+ GND
GND RX1+ RX1- Vbus SBU2 D- D+ CC2 Vbus TX2- TX2+ GND
Pin No.
Pin No.
B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1
A1 A12
B12 B1
:
: USB3.1 Super speed+USB2.0 High speed 480Mbps
: Secondary Bus: USB Power Delivery Communication
Insulator LCP* Black
Mid-plate Stainless Steel Ni plating
Contact Copper Alloy Contact : Au plating over Pd-Ni plating over Ni plating Lead : Au plating over Ni plating
Inner shell Stainless Steel Degreasing
Top shell Stainless Steel Ni plating
Bottom shell Stainless Steel Ni plating
Potting Silicone Black
* NOTE : This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine.
No. of Contacts 24 pos.
Rated Current 1.25A DC Max. for each power pin (i.e. A1, A4, A9, A12, B1, B4, B5, B9, B12)0.25A DC for the other pins
Rated Voltage 20V AC
Operating Temperature -40 to +85 C
Contact Resistance 40mΩ Max.
Withstanding Voltage 100V AC for 1 minute
Mold Resistance 100MΩ Min. (500V DC)
Mating Cycles 10,000 times
・RoHS compliant
PERFORMANCE CHARACTERISTICS