Fridge-tag 2 Fridge-tag 2 E · Fridge-tag 2 Fridge-tag 2 E External sensor (optional) Fridge-tag...
Transcript of Fridge-tag 2 Fridge-tag 2 E · Fridge-tag 2 Fridge-tag 2 E External sensor (optional) Fridge-tag...
-
QUICK INFO – SET UP
Fridge-tag 2
Fridge-tag 2 E
External sensor (optional)
Fridge-tag
Note: If you have ordered a Fridge-tag with an external sensor, place the external sensor in its predetermined location, before activating the device.
Packaging content1 Fridge-tag information2
Placing the Fridge-tag?See point 8
0510 320 max. °CInt.Sensor
Port to insertexternal sensor
Logger ID
Set button Read button
Temperature measured
Profile (alarm zones)
Temperature status
30 days history
33
yyy_ ydd_
Setting the calendar format
To activate the device, press the SET and the READ buttons simultaneously for more than 3 seconds. The following calendar format will appear: dd.mm.yyyy.
Note: After approx. 60 seconds without pressing any button of the Fridge-tag the device goes back into sleep mode. Start from the beginning.
Press READ to change the calendar format.
Then press SET to save the calendar format.
Note: If required note the date of activation on the back of the Fridge-tag.
Note: Once the device has been activated, it cannot be stopped anymore. Option 1Setting the calendar format to: dd.mm.yyyy
You receive the Fridge-tag in sleep mode. The display(LCD) is blank.
State of delivery3
Activation of the device45
3yyyd y__d
Option 2Setting the calendar format to: mm.dd.yyyy
3
3
The READ button is used to adjust the numbers. Each time you press the READ button, the number in the flashing digit will increase by 1.
The SET button is used to save the number. After pressing the SET button, the next digit will start flashing.
81020201
The 1st digit is flashing:Press READ until « » appears as the first digit.Press SET to save the digit.Go on with the next digits in the same way until date and time is set.
6 Activation completed
As soon as the last digit of the time setting is confirmed, the activation is completed. Now place the Fridge-tag. If you have a device with external sensor, connect the device with the external sensor. During max. 1 minute after activation no temperature is displayed on the screen.
7
Connection error?See user manual in chapter «Learn More»
Correct or change settings? See user manual in chapter «Learn More»
Setting the date and time
Placing the Fridge-tag
The activated Fridge-tag must be placed immediately in its predetermined location. It is recommended and important to place the device in the centre of the refrigerator for an optimal temperature observation.
8
External sensorTwo hours before activating the device the external sensor must be placed in its predetermined location. It is recommended and important to place the external sensor in the centre of the refrigerator for an optimal temperature observation and to avoid any incorrect measurements when starting the device.
Placing the Fridge-tag?See user manual in chapter «Learn More»
Fridge-tag Support
Product infor-mation
User Manual
Berlinger Website
Video
Learn More
Scan the QR codeor click on
www.berlinger.com/support/fridge-tag
Technical Specification
http://www.berlinger.com/support/fridge-taghttp://www.berlinger.com/support/fridge-tag
-
QUICK INFO – USER GUIDE
Fridge-tag 2
Fridge-tag 2 E
Temperature status1
Reading the history2
Download reports3
8101 2026
881 425 °CInt.Sensor
!
Indication of an OK display
Indication of an alarm display
The alarm symbol
The current date and time
The upper/lower Alarm indicator
The current temperature
Alarm display and confirmation options? See user manual in chapter «Learn More»
In measurement mode, when no alarm has been triggered, the following in-formation is indicated:
In measurement mode, when an alarm has been triggered, the following in-formation is indicated
The additional warning symbol
The current temperature
8101 2026561 473 °CInt.SensorThe OK symbol
The current date and time
Example of an alarm display
Press
READ
once
0510 320 max. °CInt.Sensor
Example of an OK display
8101 2026
1 218!
The highest recorded tem-perature of that day
The OK symbol
The corresponding flashing arrow Press
READ
once
The time duration out of the preset temperature high limit
The data and time of the alarm
The alarm and the warning symbol
The corresponding flash-ing alarm indicator
Acknowledge alarm? See user manual in chapter «Learn More»
1
1
Alarm display: additional information
The Fridge-tag will now generate a PDF and an ASCII report. This process can take up to 2 minutes.
Note: Continue repetitively pressing the READ button to read out the details of the past 30 days.
Note: Press and hold the READ button again for at least 3 seconds and the next alarm event will appear on the screen.
Acknowledge alarm?See user manual in chapter «Learn More»
Connect the device via USB with your PC/MAC.
Note: Disconnect the external sensor from the device first.
Download reports?See user manual in chapter «Learn More»
Press READ a second time for additionalinformation.
0510 320 max. °CInt.Sensor
2
Berlinger & Co. AG Mitteldorfstrasse 2 9608 Ganterschwil Switzerland
Tel. +41 71 982 88 11 [email protected] www.berlinger.com
Press and hold READ for 3 seconds for the Alarm-Super-Jump Function
0510 320 max. °CInt.Sensor
For more information click on www.berlinger.com/support/fridge-tag
400-01232_1
http://www.berlinger.com/support/fridge-tag