Freio_valvula P3HPA

Moduflex ProportionalTechnology

1/8” and 1/4” ported

Proportional Regulator MPT40

Catalogue no. PDE2534TCUK-abEdition: December 2006

2

Parker Hannifin CorporationPneumatic Division - Europe

PDE2534TCUK-ab

Moduflex proportional technlogy

Energy Saving

Low Watt Power Consumption

No Unnecessary Loss of Air inSteady State

Total flexibility

User friendly and easilyaccessible softwareOne basic unit suits all customerrequirements

Special applications

Food version:

Clean line design

Suitable for washdown: IP65

Compact & light weight

Small envelope

Light weight (P3HP = 285 gram)

Flexible mounting options

Stand-alone

Foot bracket mounting

DIN-rail mounting

Man-machine interface

High visibility LED display

Easy to read characters

All controls on the same face

3


PDE2534TCUK-ab


Applications for this innovative product in theAutomotive industry can be seen in majormanufacturers ‘body-in-white’ lines.

The control of clamping and welding forcesduring panel assembly is an ideal application,also accurate control in paint dipping andspraying can be achieved

The Packaging and Food industry providesanother ideal area for application of theElectronic Proportional Regulator, where finecontrol of tension on wrapping foils and paper isrequried. The degree of control and the ability tomanually change parameters makes this unitideally suited to the varying requirements of thisindustry.

Automotive

Packaging and Food

The new P3HP Regulator is designed to quicklyand accurately adjust and maintain a set outputpressure.

The unit will operate regardless of flow, inresponse to an electronic control signal. Themedium can be compressed air or an inert gas.

Applications for this technology are virtuallyunlimited; from paint spray control, papermanufacture and printing to weaving and lasercutting control; in fact anywhere that requiresaccurate remote pressure control.

In the field of general automation, the need tocontrol processes or movement via electronicsignals is of paramount importance. This newunit provides the facility to incorporate pressurecontrol into a fully integrated control system.

Automation

Generic Industries

Outstanding performance

Very fast response times

Full flow exhaust

Excellent linearity

4


PDE2534TCUK-ab


Why proportional technology ?

The difference between open or closed circuitcontrol

Standard pressure regulators, designed as part of our FRLseries go a long way towards meeting our customersneeds. In most cases these regulators work well in generalpneumatic and automation applications. However,sometimes the application calls for more precise pressurecontrol. The effects of time, cycling, input, back pressureor pressure and flow variation can all causeinconsistencies in pneumatic systems. Our newProportional Regulators are designed to eliminate thoseinconsistencies.

Open Control CircuitIn a normal pressure regulated control system, the inletpressure (p1) is converted into the output pressure (p2) bythe regulator. The set pressure (set value) is usuallymanually set by adjusting the control knob and in normalcircumstances the regulator maintains the output pressure(actual value).No facility for monitoring the output pressure is providedand there is consequently no way of checking that the setvalue and the actual value are the same. Also, no accountis taken of external influences such as air consumption bythe system, which can drastically alter the actual value.

Closed Loop Control CircuitThe input signal (set value) is converted into the outputvalue (actual value) - as in control systems but this outputvalue is continuously measured and compared with theinput signal. If they are different, the regulation unitintervenes and adjusts the output value to correspond tothe set value.

Proportional Pressure RegulatorsThe new P3H-P provides all the advantages of a closedcircuit regulated system. When a set value is defined viathe input signal (e.g. 0-10V), the pressure regulator setsthe corresponding output pressure (e.g. 0-10 bar). At thesame time the integrated pressure sensor measures theactual pressure at the unit’s outlet (actual value).If the electronic regulation system finds that the actualvalue has deviated from the set value, it immediatelycorrects the actual value. This is a continuous processensuring fast, accurate pressure regulation.

Typical application in automotive body inwhite welding pressure control

5


PDE2534TCUK-ab


Order Key

Pressure Range

Z 0 - 2 bar

S 0 - 7 bar

D 0 - 10 bar

Port type1 G Thread (BSP) Female

9 NPT Female

Port or tube size

1 1/8

2 1/4

Control Signal

A 4-20mA

V 0-10 V

P A P 3 1 D H 2 A S 2 V 1 A

Power supply

2 24 volts

Output Signal

D Digital, PNP 1)

P PNP or 0-10V 2)

N NPN or 0-10V 3)

M 4-20mA fixed 4)

Version

A Bottom exhaust

B Side exhaust

F Food version

E Forced exhaust *

Input connector

1 M12 (4 pin)

On request

*When the supply voltage is lost the unit will automaticaly exhaust the regulated pressure to 0 bar (atmospheric pressure)

1) Digital PNP output only, no analogue output selectable

2) Digital PNP and analogue 0-10V outputs selectable, by means of parameter 6. (Factory default 0-10V)

3) Digital NPN and analogue 0-10 V outputs selectable by means of parameter 6. (Factory default 0-10V)

4) Analogue 4-20mA output only.

Note: On all analogue outputs the F.S. value can be adjusted by means of parameter 8

6


PDE2534TCUK-ab


Popular Options

Port Size Order Code Control Signal Output Signal Output Pressure

G1/4 P3HPA12AZ2VD1A 0-10 V Digital, PNP only 0 - 2 bar

G1/4 P3HPA12AS2VD1A 0-10 V Digital, PNP only 0 - 7 bar

G1/4 P3HPA12AD2VD1A 0-10 V Digital, PNP only 0 -10 bar

G1/4 P3HPA12AZ2VP1A 0 - 10 V Digital, PNP or 0-10V 0 - 2 bar

G1/4 P3HPA12AS2VP1A 0 - 10 V Digital, PNP or 0-10V 0 - 7 bar

G1/4 P3HPA12AD2VP1A 0 - 10 V Digital, PNP or 0-10V 0 -10 bar

G1/4 P3HPA12AZ2VN1A 0 - 10 V Digital, NPN or 0-10V 0 - 2 bar

G1/4 P3HPA12AS2VN1A 0 - 10 V Digital, NPN or 0-10V 0 - 7 bar

G1/4 P3HPA12AD2VN1A 0 - 10 V Digital, NPN or 0-10V 0 -10 bar

G1/4 P3HPA12AZ2VM1A 0 - 10 V 4-20mA, analogue only 0 - 2 bar

G1/4 P3HPA12AS2VM1A 0 - 10 V 4-20mA, analogue only 0 - 7 bar

G1/4 P3HPA12AD2VM1A 0 - 10 V 4-20mA, analogue only 0 -10 bar

G1/4 P3HPA12AZ2AD1A 4-20mA Digital, PNP only 0 - 2 bar

G1/4 P3HPA12AS2AD1A 4-20mA Digital, PNP only 0 - 7 bar

G1/4 P3HPA12AD2AD1A 4-20mA Digital, PNP only 0 -10 bar

G1/4 P3HPA12AZ2AP1A 4-20mA Digital, PNP or 0-10V 0 - 2 bar

G1/4 P3HPA12AS2AP1A 4-20mA Digital, PNP or 0-10V 0 - 7 bar

G1/4 P3HPA12AD2AP1A 4-20mA Digital, PNP or 0-10V 0 -10 bar

G1/4 P3HPA12AZ2AN1A 4-20mA Digital, NPN or 0-10V 0 - 2 bar

G1/4 P3HPA12AS2AN1A 4-20mA Digital, NPN or 0-10V 0 - 7 bar

G1/4 P3HPA12AD2AN1A 4-20mA Digital, NPN or 0-10V 0 -10 bar

G1/4 P3HPA12AZ2AM1A 4-20mA 4-20mA, analogue only 0 - 2 bar

G1/4 P3HPA12AS2AM1A 4-20mA 4-20mA, analogue only 0 - 7 bar

G1/4 P3HPA12AD2AM1A 4-20mA 4-20mA, analogue only 0 -10 bar

Mounting Options

DIN rail Foot bracket

Cable’sFor dimensional information, refer to page 17.

Order Code Description

P8L-MC04A2A-M12 2 mtr. cable with moulded straight M12x1 connector

P8L-MC04R2A-M12 2 mtr. cable with moulded 90 degree M12x1 connector.

Order Code Description

P3HKA00MK DIN rail mounting kit

P3HKA00MF Foot bracket mounting kit

7


PDE2534TCUK-ab


Technical information

PneumaticsWorking mediumCompressed air or inert gasses, filtered to min. 40µ,lubricated or non-lubricated, dried or un-dried, pressuredewpoint 3-5oC.

Supply pressureMax. Operating Pressure:

2 bar unit: ......................... 3 bar (43.5 PSI) 7 bar unit: ......................... 10.5 bar (152 PSI)10 bar unit: ........................ 10.5 bar (152 PSI)Min. Operating Pressure ... P2 Pressure + 0,5 bar (7.3 PSI)

Pressure control rangeAvailable in three pressure ranges, 0-2 bar, 0-7 bar or 0-10bar. Pressure range can be changed through the softwareat all times. (parameter 19)

Temperature range 0oC up to +50oC (32oF up to122oF)

Weight:P3HP = 285 gram

Air consumptionNo consumption in stable regulated situation.

DisplayThe regulator is provided with a digital display, indicatingthe output pressure, either in BAR or PSI.The factory setting is as indicated on the label, can bechanged through to software at all times (parameter 14).

ElectronicsSupply voltage24 VDC +/- 10%

Power consumptionMax. 1.1W with unloaded signal outputs

Control signalsThe electronic pressure regulator can be externallycontrolled through an analogue control signal of either0-10V or 4-20mA.(parameter 4 see page 9).

Output signalsAs soon as the output pressure is within the signal band asignal is given of 24V DC, PNP Ri = 1 kOhmOutside the signal band this connection is 0V.

Connections(In case of output signal (option D))Central M12 connector 4-pole

The electrical connections are as follows:

Pin no. Function Colour

1 24V supply brown2* 0-10V* control signal Ri = 100 kOhm white3 0V (GND) supply blue4 24V alarm output signal black

.

Schematic

* In case of 4-20 mA the Ri will be 500 Ohm.

8


PDE2534TCUK-ab


Technical information

Dead bandThe dead band is preset at 1,3% F.S.(parameter 13, see page 13)

AccuracyLinearity: = < 0,3% F.S.

Proportional bandThe proportional band is preset at 10% F.S.

Fail safe operationAfter interrupting the power supply the present outputpressure is maintained at approximately the same level.After switching on the power supply again the pressurecan be adjusted immediately by giving a new controlsignal.

Full exhaustComplete exhaust of the regulator is defined as P2 ≤1% F.S.

Degree of protectionIP 65

Full scale (F.S.)For 2 bar versions this will 2 bar, for the 7 and 10 bar versionfull scale will be 10 bar.

time

a = proportional effect

pressure

requiredpressure1

requiredpressure2

control signal

dead band

signal band

proportional band

ααααα

Regulation characteristics

EU conformityCE: standardEMC: according to directive 89/336/EECThe new pressure regulator is in accordance with:

EN 61000-6-1:2001EN 61000-6-2:2001EN 61000-6-3:2001EN 61000-6-4:2001

These standards ensure that this unit meets the highestlevel of EMC protection.

Mounting positionPreferably vertically, with the cable gland on top.

MaterialsParts in contact with the working media:• Magnet Core ............................................................... Steel• Solenoid Valve Poppet ................................................. FPM• Core Housing ............................................................. Brass• Solenoid Valve Housing ............................ Techno Polymer• Regulator Housing .................................... Techno Polymer• Valve ............................................................... Polyurethane• Seats and Auxiliary Piston ............................. Delrin, Brass• Remaining Seals .......................................................... NBR• Port Connections

Standard Version ........................................................ BrassFood ............................................................. Stainless Steel

9


PDE2534TCUK-ab


How to change parameters

Pressing the Accept key “acc” for more than 3 seconds, willactivate parameter change mode. The user can then selectthe parameters by pressing up or down key. (display willshow Pxx). When parameter number is correct, pressingaccept again will enter parameter number.(display will showparameter value).

Pressing the up or down key will change the parameteritself. (display will flash indicating parameter editing mode).Pressing the accept key will accept the new parametervalue. (all digits will flash whilst being accepted).

After releasing all keys , the next parameter number will bepresented on the display. (you may step to the nextparameter). When no key is pressed, after 3 seconds thedisplay will show the actual output pressure.

When the unit is initially powered up allow approximately 10seconds for the unit to “boot-up” before changing parametersettings.

Only parameter numbers 0, 4, 6, 8, 9, 14, 18, 19, 20, 12, 13and 21 are accessible to edit. All other parameters are fixed.

Manual modeManual modeManual modeManual modeManual mode

When keys DOWN and UP are pressed during startup,(connecting to the 24V power supply) manual mode isactivated. This means that the user is able to in/decreasethe output pressure of the P3HP, by pressing the UP orDOWN key. During this action the display will blink,indicating that the manual mode is activated. Afterpowering up again, the unit will revert back to normalmode.

Advanced functionality

Pilot valve protectionWhen the required output pressure can not be achievedbecause of a lack of input pressure the unit will open fullyand will display NoP. Approximately every 10 seconds theunit will retry. The output pressure will then be approximatelyequal to the inlet pressure. As soon as the input pressure isback on the required level, the normal control functionfollows.

Safety exhaustShould the control signal fall below 0,1 volts the valve willautomatically dump downstream system pressure .

Fail safeWhen the supply voltage drops, the electronic controlreverts to the fail safe mode. The last known outputpressure is maintained at approximately the same leveldepending upon air consumption. The digital displayindicates the last known pressure setting.When the supply voltage is reinstated to the correct level,the valve moves from the fail safe mode and the outputpressure immediately follows the control signalrequirement. The display indicates the actual outputpressure.

Input protectionThe unit has built-in protection against failure and burnoutresulting from incorrect input value, typically:

The 24v DC supply is incorrectly connected to the setpointinput, the display will show ‘OL’, as an overload indication.The unit will need to be rewired and when correctlyconnected will operate normally.

The overload indicator ‘OL’ will also appear should thewrong input value be applied or the wrong input value beprogrammed: 4 - 20m instead of 0 - 10V. To correct this adifferent set point value should be input or the unitreprogrammed to correct the set point value acceptance.(via parameter 4).

Response timesTo fill volume of 100cm³, connected to the outlet of theregulator:Pressure increase from 2 to 4 bar (30 to 60 PSI) 30 msecsPressure increase from 1 to 6 bar (15 to 90 PSI) 120 msecsPressure decrease from 4 to 2 bar (60 to 30 PSI) 60 msecsPressure decrease from 6 to 1 bar (90 to 15 PSI)160 msecs

SettingsThe regulator is pre-set at the factory. If required,adjustments can be made.

Flow characteristics

Flow characteristics (supply pressure 10 bar (150 PSI))

10


PDE2534TCUK-ab


Back to Factory SettingAfter start up. (Power is on)Entering this value in parameter 0 will store the calibrated factory data into the working parameters.(Default calibration data is used)

Parameter Number 0 – Reset Back to Factory SettingsStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads

Flashing Decimal Flashing Decimal Flashing

Edits parameter.3 = standard

factory settings.Description If other than 3, Accepts and

Accesses use Up or Down saves newchangeable Accesses Displays current Arrow and parameter Sequences toparameters parameter no. 0 parameter value. accept 3 setting. next parameter.

or or

Parameter Number 4 – Set Control Signal in Volts or MilliampsStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


Displays currentparameter Accepts and

Description Accesses value. saves newchangeable Accesses 1 = V parameter Sequences toparameters parameter no. 4 0 = mA Edits parameter setting. next parameter.

Set Control SignalThe unit is factory set for 0-10 V control signal. If 4-20 mA control signal is required, change parameter 4.

or

Parameter Number 6 – Set output signalStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads

Flashing Decimal Flashing Decimal Flashing(value 0, 1 or 2)

Displays currentparameter Edits parameter

Description value. 0 = digital Accepts andAccesses 1 =m factory (NPN or PNP) saves new

changeable Accesses default for P3H 1= analog 0 .. 10 V parameter Sequences toparameters parameter no. 06 with analog options 2 = analog 4...20 mA setting. next parameter.

or or

11


PDE2534TCUK-ab


Adjust Digital DisplayIf necessary, adjustments can be made to the digital display readout in order to match to an external pressure gauge.

Parameter Number 9 –Adjust Displayed PressureStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


Use up or downarrows and

Description accept, to match Accepts andAccesses the readout saves new

changeable Accesses Displays current to an external parameter Sequences toparameters parameter no. 9 digital display. pressure gauge. setting. next parameter.

or or

Parameter Number 8 – Adjust span analog output signalStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads

Flashing Decimal Flashing Decimal Flashing(for 2 bar versions (value between

value = 92) 0 and 130)

Accepts andsaves new

Description parameterAccesses Displays current setting and

changeable Accesses parameter implements the Sequences toparameters parameter no. 8 value. Edits parameter new analog next parameter.

signal span

eller or

12


PDE2534TCUK-ab


Set Pressure ScaleUnits with NPT port threads are supplied with a factory set PSI pressure scale. Use parameter 14 to change scale to bar.

Preset Minimum PressureIf there is a need for a pre-set minimum pressure, use parameter 18. (Note: preset pressure is affected by % P19.)

Parameter Number 18 – Set Minimum Preset PressureStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads

Flashing Decimal Flashing Decimal Flashing(value between

0 and 200)

Displays currentparameter value.

Incrementalvalue is:

Description 2 bar unit:x 2 mbar x % P19 Accepts and

Accesses saves newchangeable Accesses 10 bar unit: parameter Sequences toparameters parameter no. 18 x 10 mbar x % P19 Edits parameter setting. next parameter.

or or

Parameter Number 14 – Set Pressure Scale in PSI or barStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


Displays currentparameter Accepts and

Description Accesses value. saves newchangeable Accesses 1 = PSI parameter Sequences toparameters parameter no. 14 0 = bar Edits parameter setting. next parameter.

or or

13


PDE2534TCUK-ab


Set Pressure CorrectionPressure correction allows the user to set a maximum pressure as a percentage of secondary pressure F.S.Example: If F.S. is 10 bar, set parameter 19 to 50 for maximum preset pressure of 5 bar.Pressure correction also affects the minimum preset pressure in parameter 18.Example: If F.S. is 10 bar and parameter 18 is set to a value of 100 (1 bar), and parameter 19 is set to 50%, then the actualminimum preset pressure seen is 0.5 bar.

Parameter Number 19 – Set Maximum Preset PressureStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


0 and 100)

Displays currentparameter

Description value. Accepts andAccesses Incremental saves new

changeable Accesses value is parameter Sequences toparameters parameter no. 19 % of F.S. Edits parameter setting. next parameter.

or or

Behavior ControlThe regulation speed of the pressure regulator can be modified by means of one parameter. (P 20)The value in this parameter has a range from 0-5. A higher value indicates slower regulation speed, but will be more stable.

Parameter Number 20 – Set Behavior ControlStep 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


0 and 5)

Edits parameter0 = custom set*

1 = fastest (narrowproportional band)

Description 2 = fast3 = normal4 = slow Accepts and

Accesses Displays current 5 = slowest saves newchangeable Accesses parameter (proportional parameter Sequences toparameters parameter no. 20 value. band is broad) setting. next parameter.

*When the value 0 is entered, you are able to create your own custom settings true parameters 12, 13 and 21.

or

14


PDE2534TCUK-ab


Parameter Number 12 – Set Proportional Band (P20 Must be Set to 0)Step 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


50 and 250)



changeable Accesses value is parameter Sequences toparameters parameter no. 12 X 10 mbar. Edits parameter setting. next parameter.

Set Proportional BandProportional band is used for setting the reaction sensitivity of the regulator. The displayed value is X 10 mbar and has arange between 50 (0.5 bar) and 250 (2.5 bar).

Fine Settings

Parameter Number 13 – Set Deadband (P20 Must be Set to 0)Step 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


4 and 40)



changeable Accesses value is parameter Sequences toparameters parameter no. 13 X 10 mbar. Edits parameter setting. next parameter.

Set DeadbandDeadband is the minimum limit of accuracy at which the regulator is set for normal operation.The displayed value is X 10 mbar and has a range between 2 (20 mbar) and 40 (400 mbar).

or or

or or

15


PDE2534TCUK-ab


Parameter Number 21 – Set Proportional Effect (P20 Must be Set to 0)Step 1 2 3 4 5

Press

3-6 seconds

Until DisplayReads


5 and 100)

Edits parameter5 = fastest Accepts and

Description Accesses Displays current regulation saves newchangeable Accesses parameter 100 = slowest parameter Sequences toparameters parameter no. 21 value. regulation setting. next parameter.

Proportional Effect

or

Parameter Number 39 – Displays Current Software VersionStep 1 2 3

Press

3-6 seconds

Until DisplayReads

Flashing Decimal

Displays current

Description parameter value.Accesses Accesses XXX = current

parameters parameter no. 39 software version

16


PDE2534TCUK-ab


Troubleshooting guide

Problem

Display will not light up

Unit will not, or not correctlyrespond to given setpoint

Display shows NoP.

Unit behaviour is not considerednormal

Desired pressure can not bereached

Secondary side stayspressurized

Display shows unrealistic value

Unit response time too slow ortoo quick

Unit gives too much overshoot

Unit is adjusting/regulatingconstantly

Can not enter software throughtouchpad

Display indicates ‘OL’

Any other problem

Possible Reason

No 24 volts power supply

Wrong current applied ( I.e. Voltinstead of mA or mA instead ofVolt

Setpoint signal is not stableenough

Unit detects that required outputpressure is higher than the suppliedpressure

No inlet pressure at all

Faulty settings made in the parameters

Setpoint value to low

Pre-set pressure limit has been changedto a lower max. outlet pressure

Supply pressure is to low

Setpoint value is higher than 0,1 Volt

Pre-set pressure has been enabled to acertain pressure

Display maybe configured in the wrongvalue ( bar instead of psi)

Volume behind the unit is either too bigor too small

Relation between volume and responsetime is out of balance

Airleakage in the system behind the unit

Constant changing volume behind theunit

“Deadband “area is set too small

Unit is currently working/processing

Activating time is too short

Wiring not according to diagram (24 voltconnected on the setpoint connection pin)

Wrong setpoint value given in relation toprogrammed setpoint value acceptance

Solution

Check if the wiring is connected accordingto the schematic wiring diagram

Change setpoint current or re configurethe setpoint current through the softwareby changing parameter 4

Check wiring if the setpoint signal lead isconnected to the right pin within the male M12connector ( should be pin 2)

Stabilize setpoint signal input

Adjust the inlet pressure to a higher value,preferably 0,5 bar higher than requested outputpressure

Give lower setpoint value which corresponds toa output pressure lower than the inlet pressure

Connect port 1 to the supply pressure

Reset the unit to factory settings by using thegreen key function under parameter 0

Increase setpoint value

Change max. outlet pressure back to requiredpressure by changing parameter 19

Increase supply pressure

Lower your setpoint value, preferably to 0 Volts

Reset parameter 18 to 0

Check through parameter 14, if the display valueis set on either psi or bar, if necessary changeit to the required setting

Adjust the regulating speed of the unit throughparameter 20

Adjust response time to a higher value throughparameter 20, to acheive more accurate behaviour

Resolve leakage

Unit needs to regulate to keep required pressureat the same level

Try to minimize the volume changes

Enlarge deadband setting through parameter13 in the software ( parameter 20 has to beset to 0 before changing parameter 13)

Make sure that the unit is in steady state whileactivating the software

Hold the accept button for at least 3 seconds

Rewire so that on the setpoint connection pin will beeither 0-10v or 4-20mA

Change over setpoint value to either V or mAorReprogramme the unit to the correct setpoint valuevia parameter 4

Please consult factory

17


PDE2534TCUK-ab


Side exhaust version

Dimensional drawings

Bottom exhaust version

18


PDE2534TCUK-ab

Moduflex proportional technlogy Moduflex FRLs

• Lightweight aluminium construction

• Body ported as standard

• Modular combinations may be assembledin seconds without tools

• Easy to service filter cartridge

• High performance

‘Cliploks’ locate and fix units incombination, allowing easyremoval for servicing with nowidth penalty.

Body ported as standardwith a choice of BSPP,BSPT and NPT threadforms

Standard filter units feature 5micron elements as standardwith a 40 micron option.

Large sights providedas standard

Manual, semi-auto andautomatic drain optionsare available.

Condensate bowl

One hand operation foreasy servicing, no smalleasily lost part to worryabout.

Working pressure: Max 17 bar14 bar when fitted with auto drain

Working temperature: -20 °C to +80 °C

Operating information

1/8” 1/4” 3/8” 1/2” 1/2” 3/4” 1”

40 Series 60 Series 80 Series

Port sizes:

Flow: 40 Series 60 Series 80 Series

1/8 1/4 3/8 1/2 1/2 3/4 1”

Filter 11 l/s 17 l/s 45 l/s 50 l/s 80 l/s 101 l/s 105 l/s

Regulator 13 l/s 26 l/s 63 l/s 73 l/s 101 l/s 129 l/s 130 l/s

Filter/Regulator 11 l/s 25 l/s 48 l/s 61 l/s 113 l/s 120 l/s 120 l/s

Lubricator 13 l/s 26 l/s 44 l/s 70 l/s 87 l/s 103 l/s 108 l/s

Moduflex Air SetsBody Ported Fully Modular Air Preparation System

19


PDE2534TCUK-ab


WARNING

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY ANDPROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users havingtechnical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety ofoperating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systemsand assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs,availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

!

SALE CONDITIONSThe items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governedby the provisions stated in Parker’s standard terms and conditions of sale (copy available upon request).

We reserve the right to make alterations without prior notification.

Parker Hannifin LtdPneumatic DivisionWalkmill Lane, Bridgtown,Cannock, Staffs. WS11 3LRUnited Kingdomwww.parker.com/euro_pneumatic

Pneumatic DivisionSales Offices

Austria - Wr.NeustadtTel: +43 2622 23501Fax: +43 2622 66212

Belgium - NivellesTel: +32 67 280 900Fax: +32 67 280 999

Czech and SlovakRepublics - KlecanyTel: +420 284 083 111Fax: +420 284 083 112

Denmark - BallerupTel: +45 43 560 400Fax: +45 43 733 107

Finland - VantaaTel: +358 9 4767 31Fax: +358 9 4767 3200

France - ContamineTel: +33 4 50 25 80 25Fax: +33 84 50 03 67 37

Germany - KaarstTel: +49 2131 4016-0Fax: +49 2131 4016-9199

Greece - AthensTel: +30 210 933 6450Fax: +30 210 933 6451

Hungary - BudapestTel: +36 1 220 4155Fax: +36 1 422 1525

Ireland - DublinTel: +353 1 4666370Fax: +353 1 4666376

Italy - Corsico, MilanTel: +39 02 4519 21Fax: +39 02 4479 340

Netherlands - OldenzaalTel: +31 541 585 000Fax: +31 541 585 459

Norway - LanghusTel: +47 6491 1000Fax: +47 6491 1090

Poland - WarsawTel: +48 22 573 24 00Fax: +48 22 573 24 03

Portugal - Leça daPalmeiraTel: +351 22 999 7360Fax: +351 22 996 1527

Romania - BucharestTel: +40 21 252 3382Fax: +40 21 252 3381

Russia - MoscowTel: +7 095 234 0054Fax: +7 095 234 0528

Slovenia - Novo mestoTel: +386 7337 6650Fax: +386 7337 6651

Spain - MadridTel: +34 91 675 7300Fax: +34 91 675 7711

Sweden - SpångaTel: +46 (0) 8 5979 5000Fax: +46 (0) 8 5979 5110

Switzerland - BollingenTel: +41 31 917 1850Fax: +41 31 917 1859

Turkey - IstanbulTel: +90 212 482 91 06Fax: +90 212 482 91 10

UK - CannockTel: +44 1543 456000Fax: +44 1543 456001

Ukraine - KievTel: + 380 44 220 7432Fax: + 380 44 220 6534

Freio_valvula P3HPA

Documents

Transcript of Freio_valvula P3HPA