FRAUNHOFER INSTITUTE FOR MANUFACTURING TECHNOLOGY … · the exchange of experience in adhesive...
Transcript of FRAUNHOFER INSTITUTE FOR MANUFACTURING TECHNOLOGY … · the exchange of experience in adhesive...
F R A U N H O F E R I N S T I T U T E F O R M A N U F A C T U R I N G
T E C H N O L O G Y A N D A D VA N C E D M AT E R I A L S I F A M
BREMEN BONDING DAYS NOVEMBER 11-12, 2020
Date and location of the event
November 11-12, 2020
Fraunhofer Institute for Manufacturing Technology
and Advanced Materials IFAM
– Adhesive Bonding Technology and Surfaces –
Wiener Strasse 12 | 28359 Bremen | Germany
www.ifam.fraunhofer.de
Participation fee and services
The participation fee is 785 € and includes:
Conference documents
Lunchtime snack
Drinks during breaks
Certificate of participation
If the event can't take place as planned due to the COVID-
19-pandemic, it will be postponed and the fee will only be char-
ged if you are able to participate at the alternative date.
Registration
Please register until November 4, 2020 per the following link:
www.ifam.fraunhofer.de/bremen-bonding-days/registration
You will receive the invoice after the event.
In case of questions, please contact:
Laura Limberg
Phone +49 421 2246-564
© Fraunhofer IFAM
DIRECTIONS BREMEN BONDING DAYS NOVEMBER 11-12, 2020
Hotel room reservation
Please check available rooms for staying overnight in these hotels:
ATLANTIC Hotel Universum
Wiener Strasse 4 | 28359 Bremen | +49 421 2467-0
[email protected] | www.atlantic-hotels.de
7THINGS – my basic hotel
Universitätsallee 4 | 28359 Bremen | +49 421 696 77 3 77
[email protected] | www.7things-hotel.de
Both hotels are located within a range of ten walking minutes to
Fraunhofer IFAM. Please reserve a hotel room depending on availibi-
lity directly at the hotel by September 16, 2020, using the keyword
»Bremen Bonding Days«.
Conference Organizers
Dr. Holger Fricke Prof. Dr. Andreas Groß
Phone +49 421 2246-637 Phone +49 421 2246-437
[email protected] [email protected]
We look forward to meet you in Bremen!
1 ATLANTIC Hotel Universum | Wiener Str. 4 | Phone +49 421 2467-0
2 7THINGS – my basic hotel | Universitätsallee 4 | Phone +49 421 696 77 3 77
You can reach us
By car:
A 27 until exit Horn-Lehe /
Universität, direction Universität
Turn right into Hochschulring at the
1st traffic light
After about 1km turn left into Wiener
Strasse at the 2nd traffic light
By train:
From Bremen Hauptbahnhof/Central
Station, take tram line 6 to the last
station »Universität Nord«
By plane:
From Bremen airport, take tram line 6
to the last station »Universität Nord«
BREMEN BONDING DAYS NOVEMBER 11-12, 2020
The Bremen Bonding Days are a new international conference at Fraunho-
fer IFAM. We took the concept of the long-validated German »Bremer
Klebtage« and merged it with the former EAE-Refresher course.
The first Bremen Bonding Days will take place on November 11 and 12,
2020 for the very first time. The conference is directed at practitioners,
technicians, engineers and managers in adhesive bonding from around
the world and will be held completely in English.
In five sessions, highly experienced speakers from industry and science
offer the latest insights and developments on surfaces, adhesives,
regulations, adhesive properties and production. Participants will have
the opportunity for exchanging views with expert colleagues and for
international networking. Furthermore, they will get an impression of
adhesive bonding technology at Fraunhofer IFAM during a tour through
the laboratories.
By attending the Bremen Bonding Days, all participants keep up to date
in their profession: The conference is recognized as continuous training
within the scope of DVS®/ EWF- and EWF-Personnel Qualification as well
as DIN 2304, DIN 6701 and TL A-0023.
As the worldwide leading independent research organization, Fraunhofer
IFAM has detected the potential of adhesive bonding technology very
early and has been offering commissioned research, development and
consulting regarding all aspects of adhesive bonding technology science
for over 30 years now.
With the Bremen Bonding Days, Fraunhofer IFAM aims to contribute to
the exchange of experience in adhesive bonding and the further develop-
ment of this technology on an international level.
PROGRAM
Wednesday, November 11, 2020
10:00 am Registration and welcome11:00 am Start program
IntroductionProf. Dr. Andreas Gross and Dr. Holger Fricke | Fraunhofer IFAM
SESSION 1: SURFACES
Sticking Together: The Science of What Works core principles behind real-world adhesionProf. Steven Abbott | Director | Steven Abbott TCNF Ltd
Testing the Stability of Surface Pre-treatment for Bonding surface pre-treatment – free surface energy – passivation – aluminum – contact angle measurement Tomáš Konečný | Rail Group Bonding Coordinator | Knorr-Bremse Rail Vehicle Systems
12:50 pm Lunch2:00 pm Session 2
SESSION 2: ADHESIVES
Light Curing Adhesives – Innovative Solutions for Medical Device Assemblylight curable adhesives – medical devices assembly – cost-saving assem-bly solutions – needle bonding – catheter assemblyDr. Thérèse Hémery | Head of Product Development & Application Engineering EMEA | Dymax Europe GmbH
Adhesives Chemistry – There Are Many Challenges Left for the Future renewable raw materials – improved functions like debonding on de-mand – thermal conductivity or low CTE – contradicting requirements between any purpose adhesives and adhesives manufactured for only one applicationProf. Dr. Andreas Hartwig | Deputy Director | Fraunhofer IFAM
Improved Bondings Based on Modelling functionally graded adhesive joints – simulation – optimization – dissimi-lar materialsDr. Agustín Chiminelli | Responsible R+D in Composites and Adhesives | ITAINNOVA - Aragon Institute of Technology
10:20 am Coffee break10:40 am Session 5 - Part 1
SESSION 5: PRODUCTION
Application Technology 4.0definition industry 4.0 – application to metering technology – visi-on – status of implementationAndreas Kiefer | Vice President | AtlasCopco Industrial Assembly Solu-tions
High-Rate Metallic Bonding of Typical Aircraft Fuselages automation – high-rate – aircraft – fuselage – metallic bondingDr. Patryk Burka | Project Manager | Airbus Operations GmbH
12:00 pm Coffee break12:20 pm Session 5 - Part 2
Bonding of FRP Products for Construction40 years project experiences in bonding FRP – regulations – current challenges – future developmentsMirfet Malagic | Product Manager | Fiberline A/S
E-Mobility@Audi: Innovation in Adhesive Application e-mobility – battery – gapfiller – Audi e-tron – production conceptsDr. Michael Frauenhofer | Head of Technology Development Adhesive/Polymer | Audi AG
1:40 pm Summary and farewell greetings2:00 pm Lunch2:30 pm Lab tour: Adhesive Bonding at Fraunhofer IFAM
3:20 pm Coffee break3:40 pm Session 3
SESSION 3: REGULATIONS
Circular Economy and Adhesive Bonding Technologylinear economy – circular economy – life cycle assessment – debon-ding and other sectors relevant to LCAProf. Dr. Andreas Gross | Head of Department Workforce Qualification and Technology Transfer | Fraunhofer IFAM
Techno-Economic Benefits of Quality Assurance in Adhesive Bondingstandardisation – ISO – special processes – production – training – con-fidence Dr. Gareth McGrath | Director | Flexible Manufacturing Solutions Ltd.
Plenary Discussion: Circular Economy in Adhesive Bonding Dr. Axel Heßland | Managing Director Technical Affairs | Industriever-band Klebstoffe e.V.
5:30 pm End 5:45 pm Get-together
Thursday, November 12, 2020
09:00 am Session 4
SESSION 4: ADHESIVE PROPERTIES
Power and Deception of FEA for Adhesive Bond Design AnalysisFEA – design analysis – load limit – stress distributionProf. Dr. Stijn Debruyne | Assistant Professor | KU Leuven
Program subject to change