Frames

16-2

F R A M E

TM

Softail® Style frameSRolling Thunder makes some of the greatest frames on the planet. Big Bone frames are constructed by this high quality manufacturer. Thanks Spencer! They are a fat 1 3/8” or 1 1/2” D.O.M. with .125” wall tubing, and have 1 1/4” swing arm. Frame components are CNC machined from billet steel. All frame designs on the following pages can accommodate stock up to 250mm rear tire sizes with an offset kit. Our 230mm frames will also accommodate a 250 tire with chain. You can install a 9” wide fender on 200mm frames and 230-250mm’s accept a 10 1/2” wide fender. See page 12-29 for Ness Big Wheel Conversion Kit for this frame and other frames. Also see page 16-3 for other frame features.f5001 200mm Win Big Bones f5003 230mm Win Big Bones

frame components include:

axle Coversfor 200mm frame

Hidden axle adjusters

flush mounted Swingarm Pivot Bolts

rock Guardinternal fork Stop

radius

top fill Wrap-around extended oil tankrubber mounted

Softail® frameS inClude

StrutS

16-3

Frames

riGid Style framef5002 200mm Win Big Bones f5004 230mm Win Big Bones Accepts 250 tire with chain

Softail® and rigid frame features include:• All frames are available in 1 3/8” or 1 1/2” tubing. Please specify.• 1” or 3/4” axle available. Please specify.• 100% tig welded• All frame components are CNC machined from billet steel• Hourglass style neck set-up for races and bearings • Internal fork stops• Transmission options of 5, 6 speed or Baker’s right side drive • Includes oil tank • Struts Softail® only• 38o rake with 2” forward stretch • Flush mount 1 ¼” swing arm with bolts Softail®• Hidden axle adjusters• 200mm frames only come with Rear Axle Covers, N/A for 230 to 250mm • Axis tube Softail® only• Splash guard• 230mm Big Bones Frame comes with built in offset kit and 1” inner primary aluminum spacer • Can build rake and stretch to your specifications on Special Orders

* Note: 200mm Frame accepts a 9” wide fender and 230-250mm accepts a 10 ½” wide fender.

F R A M E

TM

rock Guard

axle Coversfor 200mm frameHidden axle adjusters

radiusinternal fork Stop

top fill Wrap-around extended oil tankrubber mounted

riGid frame inCludeS oil tank

frame ComPonentS inClude tHe folloWinG ProduCtS BeloW.

Frames

16-4

Softail® frames

do not come painted.

f5022 B Motor 1” Trans Offset Kit Allows you to run 250 fat tire

B motor frame 1” offSet kit BiG tWin

tWin Cam B Style frameSAll B frames include most of the components on page 16-5 and require a B motor and transmission.

rigid frames do not come painted.

SHeet metal CHaSSiSThis chassis is designed to save time and eliminate fabrication nightmares without compromising quality or style. Includes a formed side plate filling the space between the oil tank and starter.1 3/8” tube, molded, primed and ready for paint. Includes most of the components located on page 16-5.f5016 230mm Softail® Molded Chassis

B riGid tire Sizef5012 200mm f5013 230mmB riGHt Hand drivef5014 250mm

B Softail® tire Sizef5008 200mm f5009 230mmB riGHt Hand drivef5011 250mm

16-5

axle Covers for 200mm frame

Hidden axle adjusters

flush mounted Swingarm Pivot Bolts

rock Guard

radius

f5006 250mm Right Hand Softail® f5007 250mm Right Hand Rigid

internal fork Stop

top fill Wrap-around extended oil tankrubber mounted

Right hand drive profile 250 Tire shown

Softail® & rigid frames do not come painted SinGle doWn tuBe frame

Softail® riGid tire Sizef5017 f5019 200mmf5018 f5021 230mm

riGHt Hand drivef5026 f5027 250mm

Frames

Frame accessories

16-6

CHrome CHain drive SWinGarm By PauGHCoThis replacement for ‘73-82 4 speed FX & FL models with chain drive comes chrome plated. Bearing races included. 9” center to center width.f2404 Swingarm repl. oem 47500-78

SWinGarm PartS from PauGHCo

Skid PlateThis polished Stainless Steel skid plate has ribs for increased strength.f3030 ‘36-E84 Big Twin 4 speed repl. oem 24490-36

PauGHCo tranSmiSSion Platet3640 For stock Softail® frame when using 5 speed transmission. repl. oem 47698-86t3211 For mounting a Softail® transmission to a rigid belt drive frame.

f2405f2407f2408f2406

SWinGarm Pivot BearinGManufactured from high quality materials for all factory and aftermarket swingarms. For Softail® models from ‘84-99. Sold in pairs.f2409 Pivot bearing repl. oem 9076

CHrome SWinGarm Pivot Boltf2406 ‘58-84 4 speed Big Twin repl. oem 47510-58f3020 ‘58-84 Big Twin Stock style repl. oem 47510-58SWinGarm BearinG SealSSold pairf2408 Bearing seals repl. oem 47519-58

SWinGarm BearinGSf2407 ‘58-84 4 speed Big Twin repl. oem 9052SWinGarm BearinG SPaCerS Sold pairf2405 Bearing spacers

16-7

Side Cover frame allen SCreW SetS By Gardner-WeStCottf6143 ‘82-up FXR

tHree PieCe frame ClamPSThese chrome heavy-duty frame clamps fit on frames or engine guards. Four sizes available. Chrome.t3495 1 1/4” diametert3494 1 1/8” diameter t3493 1” diametert3492 7/8” diameter

CHrome frame CoverSHide that unsightly area between the tank and side covers with this frame cover set.f3100 ‘86-96 Dresser

neSS full lenGtH air SCooPSThese ABS vented air scoops feature full coverage styling,bolt-on design, an aluminum vented screen, and allmounting hardware. Adds a whole new look to your bike. Ready to sand and paint.a3263 FX 4-speed, all FXST a3011 Air scoop insert, all Softail® & 4 sp FX with Ness air scoop satin finish only

Frame accessories

CHrome SWinGarm end CaP CoverSThese chrome covers are for the swingarm pivot end caps.f2225 ‘82-89 FXR repl. oem 47850-88f2255 ‘90-94 FXR

pivot bolt covers

16-8

knurled Billet SWinGarm Pivot Bolt CoverS CHromea3176 Swingarm bolt cover

millennium SWinGarm Pivot Bolt CoverSMade from chrome billet aluminum. Fits ‘84-up Softail®, except FLSTF & FLSTNf2073 Smooth f2074 Ball Milled

Bullet Style SWinGarmPivot BoltS This American made stainless steel set is part of a complete set of Bullet Style hardware. See hardware section for complete set. Sold pair.f6403 All Softail® models

kÜryakyn SWinGarm Pivot Bolt CoverSThis American made chrome die-cast Swingarm pivot cover fits the pivot bolt that holds the swingarm on Softail®.f3671 Swingarm pivot covers

16-9

kÜryakyn uPPer SWinGarm CoverSHides and beautifies the ugly upper area on Softail® swingarms. Chromea3143 All Softail® models.

kÜryakyn PHantom SWinGarmCoverS for Softail®

Perfectly blends the clean lines of the Softail® frame and covers up unsightly axle nuts, adjusters, etc. All hardware and instructions are included.a3142 L86-up Softail®a3141 L86-up Fat Boy®

kÜryakyn SWinGarm BoomeranG CoverThese covers for Softail® add the perfect finishing touch.Sold pair.a3140 Chrome a3144 Black

swingarm covers

Forward controls

16-10

WitHout maSterCylinder Solid PeGSf2500 ‘86-up Softail® f2501 ‘82-94 FXRf2502 ‘91-up Dyna

neSS-teCH® radiuS forWard Control kit for SoftailS®

Newly designed integrated 5/8” master cylinder, integrated brake light switch eliminates need for custom brake tee junctions, all master cylinder linkage is hidden, custom shifter rod included. Accepts any male mount footpegs and shifter pegs. Chrome.f2525 Softail® radius control kit, note: Kit does not include footpegs or shifter pegs. Order one pair of male mount footpegs and two shift pegs. One for the shift lever and one for the brake arm. See pages 16-8 thru 16-13.

CHrome forWard ControlS By leGendSthese american made forward controls are completely machined from 6061-t6 aluminum.

WitH maSter Cylinder & foldinG PeGSf2509 ‘86-up Softail®f2514 ‘82-94 FXRf2515 ‘91-up Dyna

SHifter SideChrome shifter kit. Complete withhardware and rubber footpegs.f3430 ‘52-84 FLH, ‘71-84 FX, ‘80-85 FXWG

Brake Sidef3410 ‘36-85 Big Twin when using Lockheed and Kelsey-Hayes style Master Cylinders

CHrome forWard mounted ControlS

16-11

Forward controlsHiGH quality uSa made forWard ControlS

f2456 2000-05 Softail® Chrome f2457 2000-05 Softail® 2” Ext. Chrome f2458 2000-05 Softail® Polished f2459 2000-05 Softail® 2” Ext. Polished f2444 ‘86-99 Softail® Chrome f2445 ‘86-99 Softail® 2” Ext. Chrome f2446 ‘86-99 Softail® Polished f2447 ‘86-99 Softail® 2” Ext. Polished f2448 ‘82-94 FXR Chrome f2449 ‘82-94 FXR Polished f2450 ‘91-up Dyna Chrome f2451 ‘91-up Dyna Polished f2454 Floorboard Controls Chrome f2455 Floorboard Controls Polished

CHrome rePlaCement PartS eaCHf2462 Footpegf2463 Shift & brake peg f2464 Brake armf2465 Shift arm f2466 Left side cap f2467 Right side cap f2468 Rubbers set/12CHrome PeGS for rear PaSSenGer Pairf2452 Chrome f2453 Polished mountinG HardWare f5241 Chrome flathead allen mounting hardware 10 pack Needed for all forward control kits

Bdl CHrome forWard ControlS By dalton deSiGnSThese show quality forward controls are CNC machined from billet aluminum. Features hidden hardware securing the master cylinder cover, pivot points and footpegs. Adjustable brake and shifter lever height. Side brake hose port. Direct brake actuation eliminates the flex often found in heim joints. f2461 ‘86-99 Softail® f2469 Master cylinder rebuild kitf2473 Replacement gasket for forward control

maSter Cylinder reBuild kitThis rebuild kit is for all of the forward controlslisted above.B4153 Master cylinder kit

f2469 f2473

Forward controls

16-12

forWard ControlSBy JayBrake

These units provide maximum comfort and quick response without moving your foot

off the peg. They are machined from billet aluminum and polished to a mirror finish.

The shift and brake levers adjust to suit your height and leg reach. Foot control lever and

foot peg are set out away from your bike. Braking unit has ¾” master cylinder for

stopping power. Mounting hardware except brake line is included.

Shifter linkage sold separately.For matching footpegs see page 16-18

forWard Control mountinG kit for Xl’SJayBrakes kits include steel brake & shifter brackets with black baked-on finish, polished stainless shifter lever & control rod, and mounting hardware to mount F3382 & F3412 controls.f3399 L84-90 4 speed

f3381 Wide Band style for Dyna Glide®

neSS-teCH® 3” forWard Control eXtenSion kit for all 2000 SoftailS®

Moves factory foot control 3” forward to increase leg room. Includes black anodized billet aluminum adapter plates, extended stainless steel rear brake line, extended shifter rod, kickstand spring pin and necessary hardware.f2460 Extension kit

16-13

Forward control accessories

SHifter linkaGe for JayBrake ControlSHighest quality stainless steel with a high polished finish. Fits JayBrakes Big Twin forward controls.

f3379 Smooth Linkage

f2245 Sculpted Linkage

e5021 Radius Shifter Rod

e5018 See-Thru Shifter Rod

e5019 Round Grooved Shifter Rod

e5022 Round Grooved 12 3/16” long for use with Ness 3” extender kit or other forward controls that are extended 3”.

neSS-teCH® SHifter linkaGeSthese chrome shifter rods are designed to work on all ‘86-up Softail® models 9 3/16” long

maSter Cylinder forWard ControlSfrom JayBrake B3674 5/8” JayBrake polished

CHrome SHift linkaGe rod endS CHromef2522 5/16” Female

tranSmiSSion SHift lever CHromet3570 ‘85-up Big Twin

t3169 Shifter coverk3520 ‘70-84 FL repl. 33630-70

Jiffy Stand, SHift lever, footreSt & Brake lever BraCketS mountinG kitChrome plated polished allen screws, flat head allen screws and custom countersunk washers.f4052 2000-up Softail®

t3169k3520

CHrome Billet SHifter linkaGeSBillet aluminum & precision made in America.

e5016 9 5/8” e5017 11 5/8”

Footpegs

16-14

rePlaCement neoPrene o-rinGSf2168 1” Set for large rider peg & flat kick pedal 12 pack f2169 7/8” Set for passenger/highway footpeg 14 pack f2170 3/4” Set for shift peg 8 pack

eXtended male mount rider PeGSf2178 Extended rider pegsf2179 Extended rider pegs with chrome endsf2172 Extended rider pegs with chrome ends large diameterf2180 Replacement rubbers for F2178

SHifter PeG

larGemalemount

Smallmalemount

larGe PeG larGe female mount

Small PeGSmall femalemount

kiCkerPedal

f3014 f3011 f3012 f3010 f3013 k3091 round

f3110 f2165 f2164 f3140 f3120Includes mountingblocks

k3190Popsicle Typek3140 Round

f2101 f2161 f2160 f2159 f2162 k3090 Popsicle type

f2306 f2305ReplacmentRubber only

f2302f2303ReplacmentRubber only

f2304 f2300

f2102 f2173 f2176 f2174 f2175 k3070 Popsicle type

16-15

Footpegs

univerSal footPeGSAll are available with two types of mounts. The clamp-on mount is chrome and includes a universal steel clamp for mounting onto frames or case guards. The stud mount is a 5/8” square block with 3/8” 24 thread for custom frame mounting or for mounting onto lower shocks.

footPeG allen SCreW SetS By Gardner-WeStCott

Groovedf2705 Female mountf2706 Male mountf2707 Shift peg

tWiSterf2700 Male mountf2702 Shifter peg

CHrome neSS-teCH® footPeGSSold in pairs, except shifter peg.

flamedf2053 Male mountf2054 Female mountf2055 Shifter Peg

leGendS Style footPeGS for Softail®, fXr & dynaTop quality chrome billet aluminum construction. Sold pair.

f2505

f4440 Thru-85 FX, FLH, XL front & rear footpeg mount

f4441 ‘91-up Dyna Glide® footpeg & bracket mount

f2505 Stealth pegs rear, Softail® f2506 Stealth pegs rear, FXR & Dyna

f3854 Stealth pegs rear, rubber

ruBBer inlayf2157 Clamp-onf2158 Stud mount

WinG loGof2151 Clamp-onf2152 Stud mount

riBBedf2153 Clamp-onf2154 Stud mount

WitH HoleSf2155 Clamp-onf2156 Stud mount

o-rinGf2166 Clamp-onf3120 Stud mount

torPedof2308 Male mountf2309 Shifter peg

Footpegs

16-16

tHe CHrome muStaCHe™You might just think you died and went to heaven when you go on a long putt with this jewel. Just put your feet up, lean back and enjoy. Sure gets the kinks out of those knees.f2472 2000-02 FXST, FLST Mustache Bar with small ISO®-Pegs

Pilot™ PeGSPilot™ Pegs set the standard in custom footpeg style and function. Their flowing teardrop profile compliments the shape of several components found on some of today’s cutting edge customs. A variety of models are available for virtually any application. Notice the similarities in the footpeg, stirrup and shift peg, and how great they look as a set. Check out the stirrup arm with its smooth radius. It even has a built in heel guard to prevent the heel of your boot on the front pipe.f2508 Pilot™ pegs, pairf2511 Pilot™ shift pegf2512 Pilot™ pegs with stirrups, pairB3311 Pilot™ brake pedal pad for FXST, FXDWG, or Küryakyn forward controls.

kÜryakyn male mount iSo®-PeGSRecognized as one of the best pegs on the market. Get ready to fall in love. ISO®-Pegs are the industry’s most comfortable footpegs. They dampen vibrations and give your scoot that custom look all at the same time. They feature hollow core long lasting neoprene rubber insert cleats which are isolastically mounted on a special grade 8 chrome socket head bolt. They have a soft cushiony feel, and the adapter ends are interchangeable for use on early and late model Harley®. If you’re tired of broken O-rings or drab-looking stock pegs, these are for you. f2507 ISO®-Pegs

kÜryakyn footPeGS

16-17

Footpegs

iSo-PeGS™ rePlaCeaBle endSSold pair

iSo-PeGS™ rePlaCeaBle ruBBer PadS

kÜryakyn iSo-PeGS™These dampen vibrations and give that custom look. They feature hollow-core, long-lasting neoprene rubber inserts. They have a soft feel and the adapter ends are interchangeable on early and late-model Harley®. Sold pair Chrome

kÜryakyn iSo-StirruP™ Heel reStSYou get the comfort and support of floorboards without the cumbersome look.The arm and pad swivel to any angle, then lock into place with the locknut. Sold in pairs with or without exclusive vibration dampening Iso-Pegs. Sold pair Chrome

f3670 Stirrups with small pegs

f3672 f3674 f3673f3675

f3678 Male end f3676 Female end large

f3681 Shift peg 3 pack

k3870f3682

f3679 Small peg 8 pack

f3685 f3687

k3871 Kickstart peg 4 pack

f3680 Large peg 8 pack

f3683 Stirrups without pegs

f3684 Stirrups with large pegs

B3731 Replacement heel pad

f3677 Female end small

f3672 Small male end f3673 Small 5/8” female end f3674 Large male end

f3682 Small with large female end f3675 Large 5/8” female end

f3685 Shift peg eachk3870 Kickstart peg not shown

Footpegs

16-18

rePlaCement ruBBerS for Wide Band PeGS

f3396 1 ¼” 8 pack

Sold in PairS Wide Band dovetail full ruBBer

SHiftPeG f3389 f3416 f3406

1 ¼” diametermale mount

1” diametermale mount f3415 f3403

1 ¼” diameterfemalemount

f3388 f3404

1” diameterfemale mount

f3387 f3414 f3405

1 ¼”diameter

SHort SHankf3408

1 ¼”diameter

lonG SHank

16-19

Footpeg brackets & mounts

CHrome PaSSenGer footPeG reloCation BraCketSThis chrome bracket is for relocating passenger footpegs. Attaches with stock mounting screws that fasten the fender struts to the frame. f2262 ‘84-up Softail®

footPeG mountSZinc plated bullet style footpeg rest studs available with 3/8”-24 & ½”-20 male ends for female mount style footpegs.f2183 ‘65-84 FL, ‘71-85 FX bullet style footpeg rest stud 3/8”-24 thread repl. oem 50973-65f2184 ‘41-64 FL, ‘71-72 FX bullet style footpeg rest stud ½”-20 thread repl. oem 52683-74

CHrome footPeG mountinG BarSThese 5/8” square chrome steel bars can be used as peg mounts, extensions or replacements for highway bars. Bolts & washers included. Sold pairf2238 2” long Front f2239 4” long Front f2240 3” long Rear f2238 f2239

f2240

CHrome footPeG eXtenSionSf2229 ‘80-86 FXWG, ‘84-up FXST

Footpeg mounts

16-20

rePlaCement footPeG CleviSChrome footpeg rest clevis available with 3/8”-24 and 1/2”-20 female end accepts male mount style footpegs. Sold pairf2186 ‘41-64 FL, ‘71-72 FX, ‘73-93 XL footpeg clevis with 1/2”-20 threads repl. oem 50900-72 f2189 Fits Softail 2000 & later. Bolts thru supports with 3/8”-16 x 1¾” allen. repl. oem 50942-00

HiGHWay Bar BraCketS for XlBolts into the front motor mount. Hardware included. Pegs not included. Chrome f2271 Generator XL models thru mid ‘84 repl. oem 49106-78t

HiGHWay footPeG mountinG kitSComplete with hardware. Footpegs not included.Chrome f2269 ‘82-up FXR without engine guard repl. oem 49170-85f2270 ‘71-86 FX, ‘79-85 FX except FXST, FXWG repl. oem 49170-85

PaSSenGer footPeG SuPPort kit for Xlf2241 ‘82-up XL, chrome repl. oem 50610-86t

HiGHWay footPeG mount for XlThese chrome peg blocks combine with your foot pegs and bolt to the front engine mounts. They will greatly increase comfort on long rides.f2171 ‘84-up XL repl. oem 49159-88t

f2186

f2189

16-21

Floorboards

late model floorBoardSThese late model floorboards work with stock mounting brackets on ‘80-up FLT, FLHT, FLHS, and FLHR. Also ‘86-up FLSTC, FLSTF, and FLSTN.f3301 Standard ovalf3302 Oval shaker repl. oem 50599-89tf3303 Rectangular shaker repl. oem 50621-79arePlaCement PadSf3310 Oval repl. oem 50614-40f3330 Rectangular repl. oem 50614-66

early Style floorBoardSThese original style floorboards work with stock mounting brackets on all 4-speed FL models from ‘40-79.f3300 Standard oval repl. oem 50603-40f2145 Oval shaker f3320 Rectangular shaker repl. oem 50603-74arePlaCement PadSf3310 Oval repl. oem 50614-40f3330 Rectangular repl. oem 50614-66

adJuStaBle floorBoardSThese adjustable floorboards kits will fit all 4-speed FX models ‘84-up FXST and ‘91-up FXD.f2143 Oval f2144 Oval shaker f2148 Rectangular shaker

Floorboard covers

16-22

CHrome Billet rear floorBoard CoverThese billet covers are designed to bolt over the existing rear floorboards and come complete with all necessary mounting hardware. Pairf2806 ‘87-up FLT, FLHT, FLHS & Roadking®

neSS-teCH® floorBoard SkinSThese billet aluminum covers fit over the base of rectangular styled floorboards. Pair Chromef2704 Most models f2703 Replacement rubbers

floorBoard ruBBer mountSf3340 Late style bumper set of eight repl. oem 50620-74

floorBoard BraCketSf3350 5 piece for FL with steel primaryf3360 3 piece for FL with aluminum primary

f3350

f3360

CHrome PaSSenGer floorBoard CoverSFit ‘87-up FLT, FLHTf2263 Floorboard covers repl. oem 50782-91

16-23

Floorboards

neSS-teCH® mini Billet floorBoardSArlen’s mini floorboard are the perfect compliment to Ness full length billet floorboards.Pair Chromef2058 Mini billet floorboards male mount

CuStom floorBoard WitH inSet trimAvailable in three styles. Floorboard rubber is raised through

a high-tech polished stainless steel grid for the ultimate custom look.

neSS-teCH® full lenGtH Billet floorBoard kitSMade from 3/8” billet aluminum plate and machine grooved to fit custom rubber inserts, they measure approximately 19” X 4” X 3/8”. All mounting brackets are specifically designed to work with the three models listed below. Pair

f2251 Rear fits any equipped with rear OEM passenger floorboard ‘87-up FLT, FLHT

f2252 ‘66-up FL & Softail® front with aftermarket oval shaker

CHrome PoliSHed fitment

f3973 ‘80-up flt, flHt, flHS ‘94-up flHr

f3974 f2056 ‘87-up fXStf2057 ‘86-up flSt

OvalRectangle

f2059 rePlaCement ruBBer Set

kickstands

16-24

kiCkStandS for fX, fl & Xlk3534 ‘36-86 4-speed Big Twin ‘84-88 Softail® stock length repl. oem 50061-36k3535 ‘36-86 4-speed Big Twin ‘84-88 Softail® 1” overk3530 Stock length For ‘52-84 XL/K flat bottom repl. oem 50063-59

CHrome CuStom Side Stand for Softail®

k3351 ‘84-99 and 4 Speed Big Twin

CHrome kiCkStand aSSemBlyFits ‘36-86 Big Twink3350 Standard height. repl. oem 50013-74ak3349 1” over for extended front ends.

CuStom loWered kiCkStandSThese chrome custom kickstands have no external springs for that clean look. The return mechanism is internal.k3340 Bent Legk3341 Bolt On Straight Legk3342 Weld On Bent Legk3343 Weld On Straight Leg

neSS-teCH® teleSCoPiC kiCkStand kitS WitH SPrinG loaded Ball BearinG loCkThe ulitimate in custom kickstand kits for your lowered application. Our chrome plated kickstands have a telescopic design that adjusts the height of your bike 1 inch. Our mounting brackets are machined from polished stainless steel to eliminate chrome wear in the high contact areas. All of these kits feature a hidden ball bearing design return spring for positive feel and a clean look. k3352 ‘84-99 Softail® 4 speed Big Twin models front mount k3353 2000-up Softail® rear mount

k3351

16-25

CHrome kiCkStand BraCketk3240 ‘36-up 4 speed Big Twin repl. oem’s 50049-36 & 50014-74

CHrome kiCkStand leG StoPk3360 Thru-86 Big Twin, ‘84-up Softail® & ‘80-up FLT, HT repl. oem 50094-36

kiCkStand SPrinGSk3130 ‘71-84 Big Twin 4 speed FLT & ‘80-90 thru-E84 XL repl. oem 50011-30a

kiCkStand SPrinGSk3131 ‘85-up Softails®

repl. oem 50005-85a

kiCkStand SPrinGSk3132 ‘91-up Dynas repl. oem 50057-90

kiCkStand BumPer PadSold each.k3529 ‘70-86 4-speed Big Twin & ‘84-88 Softail®

repl. oem 50100-70

kiCkStand WedGeThe wedge changes the angle of your kickstand when lowering your bike. Hardware included.k3011 Kickstand Wedge

kiCkStand allen SCreW Set By Gardner-WeStCottf4610 Thru-85 FLH & FX

kickstand accessories

CHrome kiCkStand SPrinG Platek3359 ‘36-up Big Twin repl. oem 50036-36

Front Fenders

16-26

neSS SPort front fenderThis performance styled front fender features more siding than the Cafe fender. Made ABS.f2047 5 ½” Sport fender without mounting holes

neSS WideSPort front fenderThis performance styled front fender is designed for use on a Wide Glide® front end using a 16” wheel. It looks great and is made of heavy ABS.f2048 7” Widesport fender without mounting holes

fiBerGlaSS front fenderThis fenders is made of quality, hand-laminated fiberglass with a gel-coat finish. It’s completely smoothed over with no holes. Fat Boy® style ready for primer & paint. Fits Wide Glide® front ends with 16” or 18” wheels.f2817 Fat Boy® style

CuStom front fenderS By milWaukee ironThese front fenders are laser cut from 16 gauge cold rolled steel and are precision tig welded. Fenders not indicated bolt on come smooth and will need to be drilled. Some body work may be necessary before painting.

f2600 6 ¾” width Thin skirt bolt on FXWG

f2605 7” width Long thin skirt bolt all Narrow Glide®

f2603 3 ½” width FLH style skirt.

neSS Cafe front fenderMade of heavy ABS, this front fender fits most glide-type front forks. Ready for primer & paint.f2046 4 ¾” Cafe fender without mounting holes

16-27

Front Fenders

CuStom Skirted front fender for flFor custom applications on FL front fenders only. Fits 18” or 19” wheels. Mounting bolt spacers may be necessary on certain models.f2266 ‘54-84 FL

front fender for narroW Glide®

This stock replacement front fender fits ‘73-up FX, FXR and XL models except ‘87 FXLR and FXRS Sport Edition. Comes with chrome mounting brackets.f3510 Front fender repl. oem 59007-73

Skull leatHer mudflaPProtect yourself and your bike from road debris, rain and mud being thrown back at you. Matching saddlebags, dash panels, and license frame available. See index.l3201 Mudflap

CuStom Steel front fenderSmooth Nomad gives approximately 140° wheel coverage.f3615 4 ¾” Wide smooth Nomad fenderf3616 6 ¼” Wide smooth Nomad fender

CuStom Steel front fenderSmooth gives approximately 140° wheel coverage.f3617 4 ¾” Wide smooth Spartan fenderf3606 6 ¼” Wide smooth Spartan fender

Front Fenders

16-28

front fender for HeritaGe Softail®

This replacement fender for ‘86-up Heritage Softail® comes smooth without holes & dimples for custom applications. Can also be used on ‘91-up FLSTF.f2267 6 ¾” wide repl. oem 59129-86

CuStom front fenderfor Wide Glide®

Works with the popular Wide Glide® style front forks and a 16” wheel. It is dresser style and fits ‘80-up FXST, FXWG & FXDWG models. f2268 7” wide Wide Glide® dresser fender

narroW front fenderfor Wide Glide®

Original replica front fender complete with chrome bracket. 5 ¼” wide.f2188 ‘80-up FXWG/FXST & FXSTC repl. oem 59924-80

front fender forfl modelS8 ½” wide.f3970 ‘49-84 FL repl. oem’s 59000-58, 59000-81, 59100-82 & 59101-79a.

CuStom narroW front fender for fX & XlThis custom narrow front fender for 35mm or 39mm front fork is unpainted and can be used with 18”, 19” or 21” wheels. Includes chrome brackets. 5” wide.f3570 ‘73-up FX, FXR & XL repl. oem 59031-83

CuStom narroW front fender for flUnpainted for 18”, 19” or 21” wheels.f3520 ‘49-84 FL with chrome brackets

16-29

rear Fenders

CuStom Wide rear fenderSHeritaGe StyleAll fenders are undrilled. Mounting holes mustbe determined by the builder.f3607 9” wide rear fenderf3608 11” wide rear fender

CuStom Steel rear fenderSmooth Sentry has round cut sides and gives approximately 135° wheel coverage.f3613 9” Wide smooth Sentry fenderf3614 11” Wide smooth Sentry fender

CuStom Wide rear fatBoB

Style fenderSAll fenders are undrilled. Mounting holes mustbe determined by the builder.f3619 7.5” Wide rear fenderf3620 8.5” Wide rear fenderf3602 9” Wide rear fender

rear fenderSAll fenders are undrilled. Mounting holes mustbe determined by the builder.f3622 8.5” wide rear fenderf3603 9” wide rear fenderf3604 10” wide rear fenderf3605 11” wide rear fender

H-BomB riGid rear fenderSf3621 9” wide rear fender with support brackets

late Style rear fenderSf3601 ‘97-up Softail®

repl. oem 59753-97

rear Fenders

16-30

CuStom rear fenderS By milWaukee ironThese custom rear fenders are laser cut from 16 gauge cold roll steel and are precision tig welded. Offered in a variety of custom styles to suit your individual taste. Note: Fenders come without mounting holes for custom applications. Holes will need to be drilled and some body work may be necessary before painting. Fender measurements are from skirt to skirt of the mounting area.f2608 7 ¾” Wide Fender Thick Skirt Flat Cut

fiBerGlaSS rear fenderSThese American Made hand laminated fiberglass fenders are a full 8” wide and are designed for frames widened to accept a wide wheel they work on the Pro-Fat chassis with no modification. They come in black gel-coat and have mounting holes located but not drilled. These fenders include conduit attached underneath for running taillight and license light wiring.f2813 Fatbob stylef2815 Contoured

univerSal flat Steel rear fenderSf3610 6” flat with bobbed endf2207 6” flat

flat rear fender By PauGHCof2402 6” rear custom

f2813

f2815

16-31

rear Fenders

oriGinal fatBoB rear fenderSOriginal style and custom application available with left &right chain cutaway 7” widef3530 ‘73-up Big Twin all with left side chain drivesf2196 ‘73-up XL all with right side chain drives

oriGinal Style fatBoB rear fender for Wide Glide®

Original style rear fender for ‘80-86 FXWG Fits ‘65-84 FL for custom applications. 7 ½” widef3600 ‘80-86 FXWG ‘65-84 FL repl. oem 59904-80

StoCk tyPe Style rear fender f2264 ‘81-up FXR & FXRS models repl. oem 59634-81a

oriGinal Style rear fenderS for SPortSter®

f2213 ‘59-E73 XL 6 ½” wide with light hole for early style taillight repl. oem 59611-67a f2197 L73-78 XL 6 ¼” wide with late style taillight mount repl. oem 59611-73a

oriGinal Style rear fenderS for ‘73-85 fX modelS 6 ½” Widef2192 With light mount, uses stock taillightf2193 Without light mountf2195 Bobbed with light mountf2194 Bobbed without light mount

one PieCe rear fenderS for fl This fender is stock replacement for ‘80-84 FL but can be used on ‘73-84 in place of hinged fender.f2202 7 ¼” smooth Without light mount, f2203 7 ¼” With light mount & turn signal indent repl. oem 59601-79B

oriGinal Style rear fender for late SPortSterS®

f2198 ‘82-93 XL rear fender with late style taillight mount repl. oem 59674-81a

rear fenderS f2204 ‘86-up FLSTC & FLSTN Late style with taillight mount & turnsignal mounting holes. not picturedf2205 ‘90-up FLST & FLSTF with late style taillight mount, without saddlebags repl. oem 59596-89f2206 ‘84-91 Softail® without taillight mounts or saddlebags

Fender struts

16-32

fender allen SCreW SetS By Gardner-WeStCottf6142 ‘86-up FXST Fender rail-rear

Billet rear fender Coverf3213 ‘87-94 FXR

CHrome fender Strut SetSThese strut sets come drilled OEM style or smooth with internal mounts for a custom look. Pair

oem Style WitHoutturn SiGnal

oem Style WitHturn SiGnal internal mountS aPPliCation rePl. oem’S

f3701 f3703 flSt ‘86-uP 59964-86a59969-86a

f3702 f3703 fXSt ‘86-uPflStS ‘97-uP

59954-86a59955-86a

f3710 f3750 fX ‘72-85 59928-7359929-73

f3720 f3760 fl ‘58-84 59938-5859933-58

f3730 f3770 fXWG ‘80-85 59960-8059961-80

f3740 f3780 Xl ‘54-78 59934-73

Chrome

f3702

f3701f3703

f3710 f3750

f3720 f3760

f3730 f3770

f3740 f3780

16-33

Fender accessories

Bullet Style rearHardWare Strut kit These American made stainless steel beauties are part of a complete set of Bullet Style hardware.See hardware section for complete line.f6407 Softail® bolt, nut, washer kit

Bullet Style fender Bolt Set This American made stainless steel beauty is part of a complete set of Bullet Style hardware. See hardware section for complete line.f6411 ‘84-90 Softail® front fender bolt set

CHrome univerSal fender ClamPf2212 For rigid frame repl. oem 59800-36.

reinforCed ruBBer WaSHerSThe answer to mechanical vibrations. Made of 1/8” thick reinforced neoprene rubber. Ideal for thin panels, fenders, license plates, air cleaner lids and a host of other items than benefit from rubber mounting.m9010 1/4” hole 10 pack m9020 5/16” hole 8 pack

fender trim railSBeautifully chromed for front & rear applications.f2141 ‘58-84 FLH, FLST Rear repl. oem 91007-58

16-34

rear fender SkirtChromef2265 ‘86-up FLH, FLSTC.

noStalGia tiPSThese chrome plated zinc die cast fender tips are a Nostalgic Chevron design.f2209 ‘58-86 FL rear repl. oem 59887-59af2211 ‘49-86 FL style front repl. oem 59216-59a

v fender tiPSThese chrome plated zinc die cast fender tips are a cool V design.f2208 ‘58-86 FL rear repl. oem 59887-59f2210 ‘49-86 FL style front repl. oem 59216-59

eaGle fender tiPFits most OEM and aftermarketnarrow front fenders. Chrome.f3560 Front tip repl. oem 59280-85

Fender tips

16-35

Fender lights

Skull fender ornament liGHtDress up your fender with this flaming skull. It’s red eyes light up. Comes complete with mounting gasket. Chrome.f3170 Skull fender ornament with lighted red eyes.

front fender railliGHt SetThis raillight set fits Harley® FL models and enhances the looks of the plain styled FL fender. Chrome.f2236 Front raillight set

eaGle ornament liGHtThis unique chrome front fender light has red eyes which light up. The eagle is detailed to perfection, with a gold plated beak, and will add the finishing touch to any fender.t3150 Front fender light.f2214 Replacement bulb and wire for lighted eyes.

saddlebag supports

16-36

CHrome SaddleBaG SuPPortSHold your bags away from the brake caliper and swing arm by fastening these onto either thefender struts or the shock absorber upper studs.

f2140 ‘91-up Dyna Glide® repl. 90589-91

f2133 ‘84-up Softail® repl. oem 91790-84

f2135 ‘82-up FXR, FXRS repl. oem 90587-85B

f2136 ‘94-up XL repl. oem 90799-94f2134 ‘82-93 XL repl. oem 90799-86

f2132 ‘71-85 FX FXE, ‘80-86 FXWG repl. oem 90584-85

turn SiGnal reloCation kitThis kit is required when installing our chrome saddlebag supports.t3441 ‘82-86 FXR repl. oem 90504-82at3541 ‘94-up XL repl. oem 68471-94

16-37

sissy bars & Fender racks

S4272

S4273

S4275

S4279

S4280

S4274

S4281

S4278

S4276

CHrome SiSSy BarS and Side PlateSBolt on sissy bars are constructed from solid steel bars and chrome plated. The short back rest measures approximately 8 “ above the fender, while the tall backrest measures approximately 14” above the fender. Side plates allow for a quick and easy exchange between short and tall Sissy Bars. All plates are 1/8” heavy steel plate with a chrome finish. Side plates are sold in pairs and include mounting hardware.

Side PlateS tall BaCkreSt SHort BaCkreSt aPPliCationS4276 S4282 S4290 ‘86-uP flStC/flStf/flStnS4278 S4282 S4290 ‘84-uP fXSt/C/S ‘80-86 fXWGS4273 S4287 S4295 ‘91-’95 fXd eXCePt fXdWGS4279 S4287 S4295 ‘82-’94 fXrS4275 S4283 S4291 ‘77-’84 fl modelS, 2 SCreW mountS4274 S4282 S4290 ‘58-’84 fl modelS, 4 SCreW mountS4275 S4285 S4293 ‘72-’85 fX modelS eXCePt fXSt/fXWGS4272 S4285 S4293 ‘94-uP XlS4281 S2485 S4293 ‘79-’93 Xl

S4280 S4288 S4296 ‘57-’78 Xl

5”

5”

13”

7”

luGGaGe raCk for Softail® modelSFits ‘86-up Softail® models with solo seat. Includes 4 extended saddlebag bolts for ‘90-up FLSTC models with OEM bags.Our T3441 turn signal relocation kit is required to install this rack. Chromef2128 ‘90-up Fat Boy®

repl. oem 53461-90

CuStom Billet tourinG Contour raCkCustom rack is manufactured from 1 piece of billet aluminum and is available in your choice of chrome or black anodize. Same mounting holes as stock H-D®. Drill pattern included to insure correct hole locations. All mounting hardware and instructions also included.

BoBtail fender raCkFollows the contour of your Bobtail fender. Formed steel tubing and silver brazed bell flanged joints. Fits FXST, FXSTC, FXSTS, Bad Boy™ & 4 speed FXWG models. Chromef3640 Fender rack repl. oem 56466-86

f3642 Chrome contour rackf3643 Black anodize contour rack

Patent Pending

license Frames

16-38

neSS-teCH® liCenSe Plate frameS WitH turn SiGnalSThese super-trick custom license frames with turn signals are it! With two finish styles and two lens colors to choose from, you can take your pick of the ultimate accessory to add that finishing touch you’ve been looking for. Chromel3121 Red lensl3124 Oval amber replacement lensl3125 Oval red replacement lensl3126 Replacement bulb

Billet liCenSe Plate frame WitH vertiCal turnSiGnal liGHtSl3700 Vertical Signal Lights

Skull Billet liCenSe Plate framel3504 Chrome Skull frame

iron CroSS liCenSe Plate framel3514 Iron Cross frame

Skull CHain liCenSe Plate framel3513 Skull Chain frame

16-39

license Frames

CHrome Billet liCenSe Plate mountThe use of a unique hidden mounting design eliminates any visible bolts on the face of the license frame. Includes backing plate frame & wedge bracket.l3503 Ball Milled

liGHted liCenSe Plate frameLighted license plate frame with grooved ball milled design. Chromel3702 License plate frame

CHrome Billet liCenSe Plate frameSExpertly machined billet aluminum license frames.

Four distinctive styles mean there’s something for everyone.

Standard license Plate frame Measurements are 7 1/2” x 5 1/8”l3511 Ball milled

license brackets & mounts

16-40

liCenSe Plate BraCket Easy to install, complete with stainless steel mounting hardware. Chrome l3316 All models except FXST, FXWG

CHrome liCenSe BraCketThis adjustable 3 hole license plate mounting bracket will accept almost any license plate.Does not fit FXWG & FXST.l3010 ‘55-up Big Twin-Spst repl. oem 59983-75

fatBoB tailliGHt & liCenSe Plate BraCketReplacement rear fender bracket, taillight-license plate. Fits Softail® & 4-speed FXWG with Fatbob fender.f2200 Black repl. oem 59993-80f2201 Chrome repl. oem 59993-80t

liCenSe Plate & tailliGHt fender mount BraCketl3020 7” x 4” License & Taillight Bracket

CHrome Billet tailliGHt& liCenSe Plate BraCket t3013 ‘93-95 Dyna Glide® Fatbob taillight & license plate bracket t3014 ‘80-up Softail® & 4 Speed FXWG Fatbob taillight & license plate bracket

CuStom tailliGHt & turn SiGnalThis custom taillight has both brake light and turn signals into one unit. It has a slotted lens cover for a cool custom look. Fits bobtail fenders on FXST & FXWG models 1980-up. Brackets sold separately. Parts T3013 & T3014.t3012 Taillight Assembly

16-41

license brackets & Frames

deluXe eaGle liCenSe frameThis die-cast license frame features a cast eagle emblem.l3050 Chrome

CHrome liCenSe framel3040 Frame

CuStom liCenSe Plate & tailliGHt mountFatbob fender mount. Allows license & light to mount on rear fender. Fills in space between fender & tire. Bracket slides inside of fender for a complete custom look. Either tack weld or bolt through fender. Straight, not curved.l3030 Custom License & Taillight Mount

CHrome kÜryakyn Star CaPS™ Each includes a 6mm stud, nut and washer. They install with ease. Their low draw means long life.t3531 Amber lensest3532 Blue lenses

liCenSe mount allen SetS By Gardner-WeStCottf4630 License Plate Mount All Modelsf4640 License Plate Bracket to fender all with large washers

taillights

16-42

neSS-teCH® Cateye tailliGHt aSSemBlieSChrome billet aluminum construction with slots machined. Two hot styles.

t3216 Horizontal slotst3215 Angled slots

CHrome Billet Cateye tailliGHtNever change a bulb again. This classic cateye taillight with cutting edge billet style is equipped with L.E.D.‘s. Made by Paul Yaffe.t3900 Billet Cateye Taillight

malteSe Cateye Billet tailliGHt Will work on all cateye taillight backing plates. Shown on two different licensebacking plates which are sold separatelySee page 16-43. t3901 Cateye billet taillight

CHrome liCenSe Plate BraCketS WitH l.e.d. liGHtL3154 & L3155 are for ¾” axles & stock style axle adjusters. Will not work with custom frames that use set screws inside the axle plates.l3153 ‘86-99 Softail® License plate & brake support bracket l3154 Vertical axle mount license plate bracket with ¾” axlel3155 Horizontal axle mount license plate bracket with ¾” axle

l3103Chrome License Holder for cateye taillight

l3114Chrome License Holder with L.E.D. light

vertiCal Side mount liCenSe Plate HolderS By Paul yaffe oriGinalS

l3102

16-43

license brackets & mounts

l3106 ‘89-up Softail® primary mount l3119 Pro-Street swingarm mount l3107 FXR shock mount or Ness double rail swingarm l3118 ‘87-up FXR primary mount l3109 Atlas swingarm mount l3113 1” Frame mount l3145 Rigid frame mount 1 1/8” Not Shown

vertiCal Side mount liCenSe PlateS & BraCketSBy Paul yaffe oriGinalS100% American made, Precision manufactured from T-6066 aircraft aluminum and beautifully show chrome. Mounts to axle, passenger peg or primary.

l3116l3117 l3106

l3119

l3109

l3107

l3118

l3113

l3102 License holder with license plate lightl3103 License holder for cateye taillightl3114 License Holder with LED taillightl3116 Softail® axle mount l3117 Softail® peg mount

l3152 ‘86-99 Softail® Brake Support License Plate Taillight Mount Bracket for Cateye taillight page 16-42

l3150 For Softail® with ¾” axle & stock style adjusters. License plate bracket for Cateye taillight page 16-42

l3151 ‘86-99 Softail® Brake support and License Plate Bracket

l3105Chrome License Holder with Diamond L.E.D. light not shown

taillights & brackets

16-44

l.e.d. BaGGer liGHtSCustomize your dresser with running and brake Lights.L.E.D. 1 row red prismatic lens.l5920 ‘93-up Dressers, FLT, FLHT, FLHS, & FLHR

Wide liCenSe Plate BraCket & l.e.d. tailliGHtFits those hot, new super wide rear fenders.8 ¼” wide.l5922 LED 2 row red prismatic lens light & license bracket

one roWtWo roW

fXSt & BoBtail fenderStwo row l5905 Red prismatic l5907 Red lens

dyna Wide Glide®

two rowl5904 Red prismatic l5906 Red lens

CHrome liCenSe Plate BraCket &l.e.d. tailliGHt aSSemBlieSThese top quality American made bracket assemblies are constructed to fit Bobtail & Dyna Glide® fenders without modification. These are simple bolt-on assemblies which use the stock mounting hardware. They come with a super bright L.E.D. light available in plain red or prismatic red lens. Available as a turn signal, brake light and combo park/brake light. L.E.D. units are also available separately for custom lighting installations. These lights are fully housed from the elements. These L.E.D. taillights should be used with Badland’s Load Equalizer part E1951. Will not work for Bobtails, Softails®, and Dynas with fender racks.

16-45

belt guards

neSS-teCH® Billet Belt GuardSTrue billet construction from Arlen Ness. Machined from one piece of 6061-T6 Aluminum. Available in Grooved Skirted Style and Radial Style with windows for all ‘86-up Softail® models including international models. Chrome.C2466 Grooved skirted style

CHrome uPPer Belt GuardS for fXr’SC2932 ‘85-86 FXR, FXRS, &‘85-92 FXRT C2933 ‘87-94 FXR, FXRS, FXRS-SP, FXLR, FXRS-CON not XRT

StainleSS Steel SHortyBelt GuardThis ultra-custom shorty belt guard will add that final show winning touch to your Softail®. C1474 Shorty Softail® belt guard

loWer Belt GuardChrome lower belt guard C2931 ‘85-up FXR, FLT, FLHT & FLHS repl. oem 60397-85

CHrome loWer Belt GuardThe perfect addition for your ‘91-up Dyna Glide® with 65T or 70T rear sprocket or international model with 61T rear sprocket.C2934 65T or 70T repl. oem 60475-92C2935 61T repl. oem 60474-92

StoCk Style uPPer Belt GuardC1560 ‘86-92, and ‘94 Softail®. repl. oem 60533-86

chain guards

16-46

CHain GuardS for SWinGarm modelSThese chain guards serve as stock replacement for custom applications.

Their exact specifications enable them to bolt on in minutes to most models from ‘53-91. Chrome.

riGid frame CHain GuardMounting tabs enable fitment on all Big Twin rigid frames. Chrome.C1510 Rigid frame chain guard for aluminum primary.

C1530

C2928 C2927

C2924

for fXr modelSC2928 ‘82-84 & ‘86 FXR OEM style except FXRT repl. oem’s 60640-86 & 60607-81a

for fl & fX modelSC1530 ‘73-85 FX, FXWG 4 speeds repl. oem 60302-73

for SPortSter® modelSC2929 ‘89-91 XL, ‘91-92 XLH 883 oem 60365-89C2927 ‘88-90 XL and ‘87 Hugger® OEM style repl. oem’s 60365-87 & 60405-87C2924 ‘67-78 XLH, ‘70-78 XLCH

16-47

shocks & lowering kits

neSS-teCH® ComPlete loWerinG kitEverything you need to lower the front and rear of your Softail®. Kits lower the front of FXST models by 2 ½” & FLST models by 2” while the rear designs are adjustable to lower as much as desired. Each kit includes 2 specially designed dampners. 2 adjustable rear shock adjusters & a 1” shorter kickstand. Always check ground clearance & tire to fender clearance when installing these kits.f3961 2000-up Softail® except Springer®

f3490 f2120 f3500

CHrome SHoCk aBSorBerSThese shocks are ideal for stock replacement complete with chrome springs, cams and pistons. Available with or without covers.‘73-86 4 SPeed BiG tWinS eXCePt fXSt f3490 12” eye to eye without coversf2120 12” eye to eye with coversf3500 11” eye to eye without covers‘58-72 4 SPeed BiG tWinSf2121 13 ½” eye to eye without cover

loWerinG kit for Softail® New Bulletproof kit raises or lowers your bike up to 3” with ease. Aircraft quality, made in U.S.A. by Wild One.f3960 ‘89-99 Softail®

neSS-teCH® adJuStaBle Slam kit for Softail® Adjustable design lowers the rear of your motorcycle to any desired height. Made from 1144 stress proof steel. Accepts factory mounting hardware.f3958 2000-up Softail®

CHrome SHoCk mountinG kitS for Softail® Upgrade the hardware when you upgrade your shocks. f3493 ‘84-99 Softail®

Kit includes 4 shoulder bolts & washersf3494 2000-up Softail®

Kit includes 2 shoulder bolts & nylok nuts

adJuStaBle CHrome SHoCkS for Softail® Adjustable from ½” - 1 ½”.f3492 ‘84-99 Softail®

lowering kits & shock covers

16-48

loWer SHoCk CoverSfor fXrChrome cast aluminum lower shock covers.f2126 ‘82-up FXR

SHoCk Stud CoverSThese chrome plated stud covers fit 4 speedBig Twin & XL models.f3590 ‘70-84 FL, FX, ‘65-74 XL repl. oem 54704-65f2123 ‘75-78 XL repl. oem 54704-75

SHoCk WaSHer Set By Gardner-WeStCottThese chrome washer sets are available stock and cupped designs. Replaces stock washers.f4095 Inner shock washer, 5/8 I.D.f4085 Lower shock washer, 1/2 I.D.f4975 Cupped shock washer, 3/8 I.D.f4801 ‘84-up FXR & ‘86-up XL Shock absorber mountf4800 ‘73-85 FX & FLH Shock absorber mount

CHrome SHoCk toP CoverS50’s Dome style, fits all models of with stock shocks.f3580 ‘58-up Big Twin 4 speed & ‘52-78 XL repl. oem’s 54704-52 & 54705-52

neSS-teCH® adJuStaBle Slam kit for 2002-09 flt ruBBermount modelSAdjustable feature lowers your bike from stock height to 1 ½” maximum. Kit includes 2 black powder coated adjustable brackets and all necessary hardware. Always check fender & tire clearance on lowered applications.f3959 2002-09 FLT models, except Road King® Classic

CHrome fXr SHoCk CoverSCustomize your bike with these high quality shock covers. Pairf3214 ‘86-up FXR