Frame Cad-Self Tapping Screw Spec
2
10g FRAMECAD X Drive ® Framer Main Application • Pre-fabrication of steel frame walls and trusses • Pin Point: Designed for pre-punched, TCT 0.75 – 0.95 mm steel (22 – 20 gauge) • Drill Point: Designed for pre-punched as well as non-punched, TCT 0.95 to 1.55 mm steel (20 – 16 gauge) Features & Benefits • Self tapping Pin Point aligns pre-punched holes during frame assembly for a high quality, accurate finish • Self tapping Drill Point is designed for easy penetration into heavier gauge steel for quick and easy assembly • X Drive ® recess delivers increased stability and higher torque making it significantly easier to drive, reducing worker fatigue and increasing productivity • X Drive ® incorporates a larger surface area of engagement, reducing stress on driver bits resulting in fewer breakages • Low profile flat head sits perfectly flush with the steel frame edge, providing a smooth, flat finishing surface for easy and accurate installation of cladding and lining • Underhead serrations slow the head down when rotating, reducing the opportunity for strip out and providing resistance to back out, lessening the chance for vibrational loosening during transportation • Thin E-Coat plating (optional) enables better driver engagement and smoother driving as the coating does not strip and clog threads. Additionally, E-Coat offers a high level of corrosion resistance and durability to the X-Drive ® screw • Compatible with Superdrive ® collated screw system for increased speed • Quality assured, tested and engineered for strength and capability (FRAMECAD Screw Connection Design Capacity Report available on request) Manufacturing • Manufactured in ISO 9002 and ISO 14001 certified and approved facilities • The fasteners comply with SAE J78, DIN 18182 and ASTM C 1002, as referred in ICBO report ER-5280, and are approved for use by the Uniform Building Code • Patent protected More Information To request a quote, sample pack or for more information please contact your Regional Client Manager (details overleaf) 001236 Pin Point with E-Coat Plating 002056 Pin Point 001877 Drill Point with E-Coat Plating Low profile flat head for flush surface finish Specifically engineered to help businesses reach optimum production rates, the FRAMECAD X-Drive ® is the latest development in screw fastening technology
description
frame cad specification
Transcript of Frame Cad-Self Tapping Screw Spec
10g FRAMECAD X Drive® Framer
Main Application• Pre-fabricationofsteelframewallsandtrusses
• Pin Point: Designedforpre-punched,TCT0.75–0.95mmsteel(22–20gauge)
• Drill Point: Designedforpre-punchedaswellasnon-punched,TCT0.95to1.55mmsteel(20–16gauge)
Features & Benefits
• SelftappingPinPointalignspre-punchedholesduringframeassemblyforahighquality,accuratefinish
• SelftappingDrillPointisdesignedforeasypenetrationintoheaviergaugesteelforquickandeasyassembly
• XDrive®recessdeliversincreasedstabilityandhighertorquemakingitsignificantlyeasiertodrive,reducingworkerfatigueandincreasingproductivity
• XDrive®incorporatesalargersurfaceareaofengagement,reducingstressondriverbitsresultinginfewerbreakages
• Lowprofileflatheadsitsperfectlyflushwiththesteelframeedge,providingasmooth,flatfinishingsurfaceforeasyandaccurateinstallationofcladdingandlining
• Underheadserrationsslowtheheaddownwhenrotating,reducingtheopportunityforstripoutandprovidingresistancetobackout,lesseningthechanceforvibrationallooseningduringtransportation
• ThinE-Coatplating(optional)enablesbetterdriverengagementandsmootherdrivingasthecoatingdoesnotstripandclogthreads.Additionally,E-CoatoffersahighlevelofcorrosionresistanceanddurabilitytotheX-Drive®screw
• CompatiblewithSuperdrive®collatedscrewsystemforincreasedspeed
• Qualityassured,testedandengineeredforstrengthandcapability(FRAMECADScrewConnectionDesignCapacityReportavailableonrequest)
Manufacturing• ManufacturedinISO9002andISO14001certifiedandapprovedfacilities
• ThefastenerscomplywithSAEJ78,DIN18182andASTMC1002,asreferredinICBOreportER-5280,andareapprovedforusebytheUniformBuildingCode
• Patent protected
More InformationTorequestaquote,samplepackorformoreinformationpleasecontactyourRegionalClientManager(detailsoverleaf)
001236 Pin Point with E-Coat Plating
002056 Pin Point
001877 Drill Point with E-Coat Plating
Low profile flat head for flush surface finish
Specifically engineered to help businesses reach optimum production rates, the FRAMECAD X-Drive® is the latest development in screw fastening technology
10g FRAMECAD X Drive® FramerSPECIFICATIONS
SteelTopCoatThickness(TCT)GaugeRange 0.75–0.95mm(22–20gauge) 0.95–1.55mm(20–16gauge)
Name 10gXDrive®FramerPP(E-Coat)
10gXDrive®FramerPP(YellowZinc)
10gXDrive®FramerDP(E-Coat)
10gXDrive®FramerDP(YellowZinc)
TipType PinPoint(PP) PinPoint(PP) #3DrillPoint #3DrillPoint
FRAMECADPart# 001236(Loose)002962(Collated)
002056(Loose)002961(Collated)
001877(Loose)002964(Collated)
002048(Loose)002963(Collated)
Gauge 10(4.8mm) 10(4.8mm) 10(4.8mm) 10(4.8mm)
HeadType Flat Flat Flat Flat
DriveType XDrive#1 XDrive#1 XDrive#1 XDrive#1
TPI 18 18 18 18
Length(inches) 3/4" 3/4" 3/4" 3/4"
Length(mm) 19 19 19 19
Colour Grey/Green Yellow Grey/Green Yellow
SpeedRecommendation(RPM) 2500 2500 2500 2500
CoatingClassAS3566.22002 3 N/A 3 N/A
SaltSprayResults(hours)ASTMB117 1000 48 1000 48
KesternichResults(cycles)DIN500182.0L 15 2 15 2
*Allvaluesareaverageultimatevalues.
FRAMECADFastenersarenotcategorizedasstructuralbolts.Anappropriatesafetyfactormustbedeterminedbyaqualifiedprofessionalfordesignpurposes.
ULTIMATEFASTENERSTRENGTH*
AxialTension(kN)
SingleShear(kN)
BreakingTorque(kg/cm)
TorsionalStrength(Nm)
SheartoTensileRatio(%)
12.30 9.02 70 9.83 73%
Installation Guidelines:WhenusingtheFRAMECADX-Drive®Frameritisimportanttoensure:
• Pre-holesarewellalignedpriortodrivingscrews
• QualitybrandscrewgunsorImpactdriversareused.Suggestedspecificationforoptimalperformance:4ampsminimumandRPMrangeof0to2,500
NOTE: When using impact drivers care should be taken not to overdrive screws at the seating stage resulting in fastener (thread or head) failure, or strip out of the work surface
• Theheadisfullyseatedwhentheheadisflushwiththeworksurface.
• Thefastenerpenetratesbeyondthemetalbyaminimumofthreethreadpitches
ENGLISH–FCXD03–0811
For quotes or more information you can contact us at:
www.framecad.com framecad.com/contact-us
We have offices here:
Auckland, New Zealand (Head Office)Dallas, USADubai, UAE Hong Kong Melbourne, Australia
