FP-TAUR10

1
FP-128P FP-TAUR10 Rev 03/11 Ford Taurus (2008-Never) Ford Taurus X (2008-Newer) Vehicle Base The purpose of this instruction sheet is to illustrate the manufacturer’s recommended method of installing the Ford Taurus 2008-Newer vehicle base. The base is a simple and discreet solution that installs in minutes and requires no drilling. Installation 1.) Remove the seat bolts located at the front of the passenger seat. 2.) Loosen but do not remove the seat bolts at the back of the passenger seat. 3.) Orient the Ford Taurus base with the bent flange towards the front of the vehicle. 4.) Slide the base between the seat legs and the vehicle floor pan (see Figure 2). 5.) Align the slots of the base with the mounting holes on the seat and vehicle floor. 6.) Re-insert the bolts that were removed in STEP 1. 7.) Tighten all four (4) seat bolts securing the passenger seat. 8.) Secure the Offset Riser (FP- STEP) to the Ford Taurus base. Product Mounting Disclaimer Lund Industries, Inc. is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Lund Industries, Inc. products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is required. Lund Industries, Inc. specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications and recommendations, Lund Industries, Inc. product instruction sheets. Specialists in Emergency Vehicle Products Since 1978 Design, Manufacturing, Distribution & Installation Mounting Slots Offset Riser (FP-STEP) 4 x 3/8 Washers 4 x 3/8 Lock Washers 4 x 3/8-16 x 3/4" Hex Head Bolts

description

 

Transcript of FP-TAUR10

Page 1: FP-TAUR10

FP-128P FP-TAUR10

Rev 03/11 Ford Taurus (2008-Never) Ford Taurus X (2008-Newer) Vehicle Base

The purpose of this instruction sheet is to illustrate the manufacturer’s recommended method of installing the Ford Taurus 2008-Newer vehicle base. The base is a simple and discreet solution that installs in minutes and requires no drilling. Installation 1.) Remove the seat bolts located at the front of the passenger seat.

2.) Loosen but do not remove the seat bolts at the back of the passenger seat.

3.) Orient the Ford Taurus base with the bent flange towards the front of the vehicle.

4.) Slide the base between the seat legs and the vehicle floor pan (see Figure 2).

5.) Align the slots of the base with the mounting holes on the seat and vehicle floor.

6.) Re-insert the bolts that were removed in STEP 1.

7.) Tighten all four (4) seat bolts securing the passenger seat.

8.) Secure the Offset Riser (FP-STEP) to the Ford Taurus base. Product Mounting Disclaimer Lund Industries, Inc. is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Lund Industries, Inc. products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is required. Lund Industries, Inc. specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications and recommendations, Lund Industries, Inc. product instruction sheets. Specialists in Emergency Vehicle Products Since 1978 Design, Manufacturing, Distribution & Installation

Mounting Slots

Offset Riser (FP-STEP)

4 x 3/8 Washers

4 x 3/8 Lock Washers

4 x 3/8-16 x 3/4" Hex Head Bolts

June 17, 2010 · 2018. 4. 18. · 2,933 2,905 2,978 2,964 3,032 2,967 0 1,000 2,000 3,000 1st FP 2nd FP 3rd FP 4th FP 5th FP 6th FP 7th FP 8th FP 9th FP(Forcast) 10th FP(Forcast)

June 17, 2010 · 2018. 4. 18. · 2,933 2,905 2,978 2,964 3,032 2,967 0 1,000 2,000 3,000 1st FP 2nd FP 3rd FP 4th FP 5th FP 6th FP 7th FP 8th FP 9th FP(Forcast) 10th FP(Forcast)

S PEED S TILE FP - Gunneboassets.gunnebo.com/Documents/SpeedStile-FP-BA-EV-Datasheet.EN… · s peed s tile fp product data ba | ev. standard ... speed stile fp s peed s tile fp ...

S PEED S TILE FP - Gunneboassets.gunnebo.com/Documents/SpeedStile-FP-BA-EV-Datasheet.EN… · s peed s tile fp product data ba | ev. standard ... speed stile fp s peed s tile fp ...

Ball Valve Technical Documentation, B2VS/VSS and B3.....VALVE SIZE Cv TYPE MODEL # ¾” Fp Cv 1” Fp Cv 1¼” Fp Cv 1½” Fp Cv 2” Fp Cv 2½” Fp Cv 3” Fp Cv 4” Fp Cv ½”

Ball Valve Technical Documentation, B2VS/VSS and B3.....VALVE SIZE Cv TYPE MODEL # ¾” Fp Cv 1” Fp Cv 1¼” Fp Cv 1½” Fp Cv 2” Fp Cv 2½” Fp Cv 3” Fp Cv 4” Fp Cv ½”

DIRECT TO GATEWAY CASINOS INNISFILinnisfil.gatewaycasinos.com/wp-content/uploads/2020/02/angel_schedu… · TRAVELS TO GATEWAY CASINOS INNISFIL & CASINO RAMA RESORT FP FP FP FP FP

DIRECT TO GATEWAY CASINOS INNISFILinnisfil.gatewaycasinos.com/wp-content/uploads/2020/02/angel_schedu… · TRAVELS TO GATEWAY CASINOS INNISFIL & CASINO RAMA RESORT FP FP FP FP FP

U01 FA FP - CEPT University CEPT University 2015... · fa-304 fp-402 fa-102 fa-103 fa-104 fp-101 fp-102 fp-103 piraji sagra studio m.plan 1st year m.plan 1st year fp-104 fp-105 fm

U01 FA FP - CEPT University CEPT University 2015... · fa-304 fp-402 fa-102 fa-103 fa-104 fp-101 fp-102 fp-103 piraji sagra studio m.plan 1st year m.plan 1st year fp-104 fp-105 fm

FP transactions. Basic FP transactions FPMISC FPCAP.

FP transactions. Basic FP transactions FPMISC FPCAP.

FP-growth - ULisboa · PDF file1 FP-growth Challenges of Frequent Pattern Mining Improving Apriori Fp-growth Fp-tree Mining frequent patterns with FP-tree Visualization of Association

FP-growth - ULisboa · PDF file1 FP-growth Challenges of Frequent Pattern Mining Improving Apriori Fp-growth Fp-tree Mining frequent patterns with FP-tree Visualization of Association

FP-7-FP-4 MIDI Imple e

FP-7-FP-4 MIDI Imple e

FP-410 FP-350

FP-410 FP-350

› 12.pdfFP-IV, FP-V, FP-VI, FP-VII, FP-VIII, FP-IX, FP-X, FP-XI, FP-XII, FP-XIII, FP-XIV and FP-XV (Plate 1). Out of 20 samples collected from ten villages of patan district (Table

› 12.pdfFP-IV, FP-V, FP-VI, FP-VII, FP-VIII, FP-IX, FP-X, FP-XI, FP-XII, FP-XIII, FP-XIV and FP-XV (Plate 1). Out of 20 samples collected from ten villages of patan district (Table

FP-2500/FP-2600 Series User Manual - Pro-face Touch … · FP-2500/FP-2600 Series User Manual Digital Electronics Corporation. FP-2500/FP-2600 Series User Manual 1 1) ... • Do not

FP-2500/FP-2600 Series User Manual - Pro-face Touch … · FP-2500/FP-2600 Series User Manual Digital Electronics Corporation. FP-2500/FP-2600 Series User Manual 1 1) ... • Do not

PureFlow AirDog® AirDog® FP-100 & FP-150 1994 … · PureFlow AirDog® AirDog® FP-100 & FP-150 1994-1998 Cummins Diesel

PureFlow AirDog® AirDog® FP-100 & FP-150 1994 … · PureFlow AirDog® AirDog® FP-100 & FP-150 1994-1998 Cummins Diesel

FP P l a c e RU CT Z oni g By -law N . 9 14€¦ · mp -1 s ru f ru ru-29 mr-2 rr ct r -5 s rls fp-10 rmhp ru fp-23 ru rls fp-35 fp ru-2 6-s fp-5 rls ru-2 5 rls-6 fp fp-16 fp-48 fp-27

FP P l a c e RU CT Z oni g By -law N . 9 14€¦ · mp -1 s ru f ru ru-29 mr-2 rr ct r -5 s rls fp-10 rmhp ru fp-23 ru rls fp-35 fp ru-2 6-s fp-5 rls ru-2 5 rls-6 fp fp-16 fp-48 fp-27

PMS System FP Analysis. Step-1: Type of FP Count Development project FP count.

PMS System FP Analysis. Step-1: Type of FP Count Development project FP count.

FP-growth. Challenges of Frequent Pattern Mining Improving Apriori Fp-growth Fp-tree Mining frequent patterns with FP-tree Visualization of Association.

FP-growth. Challenges of Frequent Pattern Mining Improving Apriori Fp-growth Fp-tree Mining frequent patterns with FP-tree Visualization of Association.

Quadro per un Giglio - Pasquale Aiezza: Home per un giglio Partitura.pdf · ff 8 f f f f f fp f fp f fp f fp f f fp f f fp f f fp f f fp f fp f & &b b > ∑ ∑ ∑ &bb∑ ∑ ∑

Quadro per un Giglio - Pasquale Aiezza: Home per un giglio Partitura.pdf · ff 8 f f f f f fp f fp f fp f fp f f fp f f fp f f fp f f fp f fp f & &b b > ∑ ∑ ∑ &bb∑ ∑ ∑

FP-I4C User's Manual€¦ · Programmable Controller User's Manual FP-Industry 4.0 Communicator (FP-I4C) ACGM0162V2EN 2020.06

FP-I4C User's Manual€¦ · Programmable Controller User's Manual FP-Industry 4.0 Communicator (FP-I4C) ACGM0162V2EN 2020.06

FP+ Operation Manual OM-FP+ Rev105

FP+ Operation Manual OM-FP+ Rev105

FP-A80U FP-A60Ufiles.sharpusa.com/Downloads/ForHome/HomeEnvironment/AirPurifier/...E-1 ENGLISH ENGLISH Declaration of Conformity SHARP AIR PURIFIER FP-A80U / FP-A60U This device complies

FP-A80U FP-A60Ufiles.sharpusa.com/Downloads/ForHome/HomeEnvironment/AirPurifier/...E-1 ENGLISH ENGLISH Declaration of Conformity SHARP AIR PURIFIER FP-A80U / FP-A60U This device complies

Anasim -fp Power integrity analyzer/optimizer Bottomline Benefits -fp -fp Raj Nair, Anasim Corporation Anasim Q3 2010.

Anasim -fp Power integrity analyzer/optimizer Bottomline Benefits -fp -fp Raj Nair, Anasim Corporation Anasim Q3 2010.