Four-wheel Electric Counterbalanced Lift Trucks E3.50–5 · Product Features Application matched...
Transcript of Four-wheel Electric Counterbalanced Lift Trucks E3.50–5 · Product Features Application matched...
E3.50XL, E4.00XL, E4.50XLS, E4.50XL, E5.50XL
Equipment and weight:Weights (line 2.1) are based on the following specifications:Complete E3.50-4.00XL truck with 3 100 mm Vista 2-stage limited free lift mast, E4.50-5.50XL truck with 2 850 mm Vista 2-stage limited free lift mast, 1 070 mm hook type carriage with load backrest and 1 200 mm forks. 48 volt electrical components and overhead guard.
Specification data is based on VDI 2198
Forks:E3.50/E4.00XL: 50 x 130 x 1 000 to 1 800 mm longE4.50XLS/E4.00XL/E5.50XL: 60 x 150 x 1 200 to 2 400 mm long
Fork spacing:Fork carriage width: 1 070 mm 1 220 mmInside to inside, minimum: 30 mm 20 mmOutside to outside, maximum: 900 mm 1 130 mm
Load centre (mm)
Rat
ed lo
ad (k
g)
E5.50XLE4.50XL/E4.50XLSE4.00XLE3.50XL
Load centre
Distance from front of forks to centre of
gravity of load.
Rated load
Based on vertical masts up to
4 600 mm to top of forks.
= Centre of gravity of unladen truck
a = Minimum operating clearance
(V.D.I. standard = 200 mm BITA recommendation = 300 mm)
l6 = Load length
*Standard tread shown-see line 3.6 for optional tread
NOTE:Specifications are affected by the conditionof the vehicle and how it is equipped, as wellas the nature and condition of the operatingarea. If these specifications are critical, theproposed application should be discussedwith your dealer.
¶ Bottom of forks
◗ Without load backrest
h6 subject to +/- 5 mm tolerance
FLS 1500 full-suspension seat
Add 30 mm with load backrest
Stacking aisle width (lines 4.33 & 4.34) is based on the V.D.I. standardcalculation as shown on illustration.The British Industrial Truck associationrecommends the addition of 100 mmto the total clearance (dimension) forextra operating margin at the rear ofthe truck.
† Gradeability figures (lines 5.7 & 5.8) areprovided for comparison of tractiveperformance, but are not intended toendorse the operation of the vehicle onthe stated inclines. Follow instructionsin the operating manual regardingoperation on inclines.
Extended shift on
Variable
Tables key:
Add 501 mm with load backrestextension
Add 452 mm with load backrestextension
� Deduct 452 mm with load backrestextension
Add 375 mm with load backrestextension
Add 326 mm with load backrestextension
Add 321 mm with load backrestextension
Deduct 326 mm with load backrestextension
Deduct 321 mm with load backrestextension
Wide tread required
Notice
Care must be exercised when handling
elevated loads. When the carriage
and/or load is elevated, truck stability
is reduced. It is important that mast tilt
in either direction be kept to a
minimum when loads are elevated.
Operators must be trained and adhere
to the instructions contained in the
Operating Manual.
Safety:
This truck conforms to the current EU requirements.
Hyster products are subject to change without notice.
Lift trucks illustrated may feature optional equipment.
Mast and Capacity Information
The rated capacities shown are for masts in a vertical position on trucks equipped with standard or sideshift carriage and nominal length forks. Masts above themaximum fork heights shown in the mast table are classified as high lift and, depending on the tyre/tread configuration may require reduced capacity, restricted back tiltor wide tread.
Values shown are for standard equipment. When using non-standard equipment these values may change. Please contact your Hyster dealer for information.
Product Features
Application matched performance and battery shift life
■ Hyster ACX system offers extended shift life or extra AC performance options to suit each application.
■ AC technology on both traction and hydraulics for reliable, positive performance.
■ Brushless DC steering motor.
■ Compact dimensions and extraordinary manoeuvrability offer tight aisle widths.
■ Available with cushion or pneumatic shaped solid tyres.
■ Available with 48V or 80V battery configuration.
Advanced ergonomic features to inspire productivity
■ Hydraulic control/seat choices
Standard fully adjustable semi-suspension seat with integral armrest. With low effort, soft touch, manualhydraulic levers.
Optional e-hydraulic seat with TouchPoint™ mini-levers provide ultimate fingertip precision control.
Optional e-hydraulic seat with TouchControl™ joystick. Especially suited to intensive applications where hydraulic operation is frequent and accurate/delicate hydraulic control is required.
■ Convenient step and handgrip for ease of access
■ Demand Sense Steering
■ Monotrol® pedal (optional)
■ Clear view dash display with LCD indicators
■ 4 pre-programmed performance modes
Pin codes (optional) can be allocated to individual drivers allowing them access only to the performancelevel suited to their ability and experience.
■ Battery discharge indicator with lift interrupt
■ Full range of Vista masts. 2 stage limited free lift, 2 or 3 stage full free lift with
hydraulic mast cushioning for dependable handling of fragile loads.
Offering excellent visibility with smooth, low noise operation.
Dependability and low cost of operation
■ Extended battery shift life
■ 1 000 hour service intervals on most major components*
■ 100% brushless AC motors
■ Auto regenerative braking
■ On board diagnostics for early warning of maintenance requirements
■ One piece frame, designed using FEA** technology, and robust steer axle design for proven durability
* Subject to applications survey
**Finite Element Analysis
Hyster Europe, Flagship House, Reading Road North, Fleet, Hants GU51 4WD, England.
Tel: +44 (0) 1252 810261 Fax: +44 (0) 1252 770702
Email: [email protected] http://www.hyster.co.uk
A division of NACCO Materials Handling Limited.
06/06/TLC Printed in EnglandForm No. 901040/0
Hyster®, ®, Vista® and Monotrol® are registered trademarks of Hyster Company in the United States and in certain other countries.TM, FortensTM, Pacesetter VSMTM, DuraMatchTM, DuraMatch PlusTM, TouchPointTM, TouchControlTM, EZXchange & HSMTM are trademarks
of Hyster Company in the United States and in certain other countries. TM
Strong Partners, Tough Trucks,
for Demanding Operations Everywhere.
Hyster supplies a complete product range,
including Warehouse trucks, IC and Electric
Counterbalanced trucks, Container Handlers
and Reach Stackers.
Hyster is committed to being much more than a
lift truck supplier. Our aim is to offer a complete
partnership capable of responding to the full
spectrum of materials handling issues:
Whether you need professional consultancy on
your fleet management, fully qualified service
support, or reliable parts supply, you can
depend on Hyster. Our network of highly trained
dealers provides expert, responsive local
support.
They can offer cost-effective finance packages
and introduce effectively managed maintenance
programmes to ensure that you get the best
possible value. Our business is dealing with
your materials handling needs so you can focus
on the success of your business today and in
the future.