FOS Series Checked

8/3/2019 FOS Series Checked

http://slidepdf.com/reader/full/fos-series-checked 1/5

FOS Series

FOS Series Fin Mills are the first choice of OEM and After Service heat exchanger

manufacturers worldwide. They are designed and built to be the most rugged, reliable,

precision producers of high efficiency heat transferring air way fins and turbulators available.

INNOVATION IN FIN PRODUCTION TECHNOLOGY

The FOS Series of Fin Mills includes

simple technology models for cost

effective low volume manufacturing and

high speed models utilizing advanced

technologies for the highest possible

statistical capabilities of every

operating specification and the highest

speed operating rates required by any

manufacturing systems.

All FOS Finmodels are built for years of

reliable production use in any

manufacturing environment.

Louvered, non-louvered, offset and side wavy designs can be

produced on a range of FOS series Fin Mills that can be suited for any

manufacturing application.



FOS STANDARDIZED COMPONENTS AND TOOLING

All FOS Fin Mills share a variety of

common components and assemblies.FOS form roll tooling and tooling stands

can be used on any FOS model, from

the FOS-Mini to the FOS-150 highest

speed model. Other standard

components are common among many

models.

LONG LIFE FIN ROOLL TOOLING

Fin Rolls from Creads are the longest life, highest

precision fin rolls in the world. Creads rolls are

unmatched for fin forming precision of height,

louver length and configuration, fin density and fin

shape. Available in conventional radius

convolution, “flat top” (“square wave”) and offset

and lanced-offset fin designs.

EASE OF OPERATION AND CHANGEOVER

All FOS Fin Mills are designed for ease of

set-up, adjustment and operation.

Operators of any skill level can easily

maintain and operate all FOS fin mills.

Maintenance staff of all skill levels can

make most fin model changeovers in

minutes.



SPECIFICATION (FOS80/100/150)

Machine descriptions

Standard Units Options Main Machine

Uncoiler

Dancer roll unit

Tension control unit

Strip lubrication unitFin pitch control unit

Hump unit

Feed unit

Cut off unit

Uncoiler (Single coil type)

Fin Flattening unit

Forming unit auto clamp

Fin length checker and OK/NG dividing

chute

Fin Alignment unit

Fin tray

* Fin forming unit is available upon request.

Utility and Basic specification

Power supply Standard AC 200V 50/60 Hz

Control Voltage Control Voltage AC100V/50Hz DC24V

Power Voltage AC200V/50Hz

Control pneumatic More than 0.39MPa

Guaranteed term Within one series of operation / one(1)year

Production capability

FOS-80 FOS-100 FOS-150

Forming speed MAX 300m / min MAX 350m / min MAX 400m / min

Cutting speed MAX 80cuts / min MAX 100cuts / minMAX 150cuts / min

Cutting tolerance ±0 convolution

Fin specification: Standard model

Fin width 12－60㎜

Fin height Max12㎜

Fin length Max900mm

Material thickness 0.05－0.3㎜

Coil material specification

OD Max 1,800mm

ID 200mm – 300mm



Weight capacity Max 250kg/1 coil

COMPACT MODEL of FOS FIN MILLSThe FOS-Mini Fin Mill uses fundamental

technologies for lower volume

manufacturers while providing the same

durability and precision fin production of

higher speed FOS models.

SPECIFICATION for FOS-Mini

Standard Units

Uncoiler

Dancer roll unit

Tension control unit

Strip lubrication unit

Fin forming unit

Fin pitch control unit

Hump unit

Feed unit

Cut off unit

* Fin forming unit is available upon request.

Utility and Basic specification

Power supply Standard AC 200V 50/60 Hz

Control Voltage Control Voltage AC100V/50Hz DC24V

Power Voltage AC200V/50Hz

Control pneumatic More than 0.39MPa

Guaranteed term Within one series of operation / one(1)year



Production capability

Forming speed Max 100 m/minCut off speed Max 40 cuts/min

Cut off tolerance ±0 convolution

Fin specification: Standard model

Fin width 12－60㎜

Fin height Max12㎜

Fin length Max900mm

Material thickness TBD

Coil material specification

OD Max 1,000mm

ID 200mm – 300mm

Weight capacity Max 150kg/1 coil

FOS Series Checked

Documents

Transcript of FOS Series Checked