Fortiap-222B-quickstart

7/27/2019 Fortiap-222B-quickstart

1/20

FortiAP 222BQuickStart Guide


2/20

January 08, 2013

20-000-02972-20130108

Copyright 2013 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, andFortiGuard, are registered trademarks o Fortinet, Inc., and other Fortinet

names herein may also be trademarks o Fortinet. All other product or company

names may be trademarks o their respective owners. Perormance metrics

contained herein were attained in internal lab tests under ideal conditions, and

perormance may vary. Network variables, dierent network environments and

other conditions may aect perormance results. Nothing herein represents any

binding commitment by Fortinet, and Fortinet disclaims all warranties, whether

express or implied, except to the extent Fortinet enters a binding written contract,signed by Fortinets General Counsel, with a purchaser that expressly warrants

that the identifed product will perorm according to the perormance metrics

herein. For absolute clarity, any such warranty will be limited to perormance in

the same ideal conditions as in Fortinets internal lab tests. Fortinet disclaims

in ull any guarantees. Fortinet reserves the right to change, modiy, transer, or

otherwise revise this publication without notice, and the most current version o

the publication shall be applicable.


3/20

Table o Contents

Package Contents 1

Connecting the FortiAP Unit 2

Conguring the FortiAP Unit 3

Technical Specications 5

Cautions and Warnings 6

Documentation and Links 9

Register Your Product 10

Product License Agreement 11


4/20

Package Contents

Thank you or purchasing the FortiAP 222B. The FortiAP 222B oers you

unmatched perormance, fexibility, and security or your wireless network. The

appliance combines high perormance hardware with multi-band wireless support,

weatherproong, 802.3a Power over Ethernet, and provides simplied protection

or your network with Fortinets unmatched depth and breadth o security services.

Your box contains the ollowing:

FortiAP-222B

Mounting Hardware2x 2.4GHz Wireless Antenna (N-type connector)

2x 5GHz Wireless Antenna (N-type connector)

Power over Ethernet Adapter

Weatherproo connector

QuickStart and Installation Guides

Page 1

2 x 5 GHz Antenna

2 x 2.4 GHz Antenna

Pole-Mount Bracket Wall-Mount Base

Weatherproof

Connector

PoE

Adapter

Grounding Cable &

Power Adapter

Mounting

Screws & Bolts

Install

Guide

Pole Strap

HardwareInstallation Guide

FortiAP-222B

Fo rtiAP222B

802.11A/ B/G/NDUAL CONCURRENTRADIOA P

RealTimeNetworkProtection

QuickStar tGuide

For tiAP-222B

2 x 5 GHz Antenna

2 x 2.4 GHz Antenna

Pol e-Mount B rac k et Wal l -Mount Bas e Waterproof

Connector

PoE

Adapter

Grounding Cable&Power Adapter

Mounting Screws

&Bolts

Install

Guide

QuickStart Guide

Pole

Strap

HardwareInsta lla tionGuide

FortiAP-222B

FortiAP222B802.11A/B/G/NDUALCONCURRENTRADIOAP

Rea lTimeNe twork Pro tection

Quick StartG uideFo rtiA P-222 B

2 x5 GH zA nte nna2 x2 .4G Hz An tenn a

P ole-Mo unt Bra cke tWa ll- Mo unt Ba se Wa terp roo fCo nne cto r

PoEAda pte r

G rou ndin gC ab le& Po wer Ad apte rMou ntin gS cre ws&B olts

In sta llGuid e

Qu ick Sta rtGuid e

PoleStra p

Har dwar eInstallationGuideFor tiAP-2 22BSte p1.Unpackin gOpe ntheshippingcartonand carefullyunpackitsconte nts.Thecartonshouldco ntainthefollowingitems :=FortiAP-222Bunit=48VPoEAdapterunitw/g roundingcableandpow eradapter=1xHosestrap

=4xMountingscrews

=2xMountingbolts=4xWiFiantennae=1xPole-mountbracket=1xWall-mountbase=1xWaterproofconnector=FortiAP-222BQuickStartGuide(QSG)=FortiAP-222BHardware InstallationGuide(thisdo cument)=Warrantyregistrationcard=SoftwareCD

Ifan yitemisfoundmissingord amaged,pleasecontac tyourlocalresellerforrep lacement.P ac k ag eC ontents:

Ste p2.Installin gThe FortiAP-222Bunitisdes ignedforoutdooruseand maybeattachedeithert oapoleorawall.Awate rproofconnectorissupp liedtoensureawe athertightsealforconnec tingtheEthernetcableto theFortiAP-222Bunit.T o mounttheF ortiAP -2 2 2 B unitonaw all1.U singwall-mountbasea satemplate,markthelo cationofthemountingbo ltholesonaflatwallsurf ace.2.D rillthemountingholes inthemarkedofflocation3.F astenthewall-mountb asesecurelytotheback ofFortiAP-222Bunit,usin gthesuppliedmountings crews.4.A ttachtheFortiAP-222B unitandbaseassembly tothewall.5.T ightenthemountingbo ltssecurely.

Step 1.U npacki ngOp en th e sh ipp in g cart o na nd c are fu lly un pa ck its c on te nts .T h ec art on s ho uld c on tain th efoll ow in g ite ms :

Fo rtiA P -22 2 Bu nit 48 VD C P oE A da pte r un itw / gro un din g ca ble a nd p ow e ra da pte r 1x P ole s tra p 4x Wall -mou nt b rac ke tfa s ten in gs cre w s (he x he ad )w /w a sh ers 4x P ole -mo un tb rac ke tfa s ten in gs cre w s (P hilli ps h ea d) w/w a s he rs 4x C on cre te mou nti ng b olts w / wa sh ers 2x 5 GHz WiF ia nte nn ae a n d2 x 2.4 GH z WiF ia n ten n ae 1x P ole -mo un tb rac ke t

1x Wall -mou nt b ase 1x Wate rp ro of co nn ec to r Fo rtiA P -22 2 BQu ick Sta rt Guid e (QSG ) Fo rtiA P -22 2 B Ha rd wa re In sta lla tio n Gu id e(t h isd o cu me nt) Wa rra n ty reg is tra tio nc ardIfa ny ite mis fo un d miss ing o rd ama ge d, ple as e co nta ct yo u rlo ca lre s elle r for re pla ce men t.

P a c k a g e C o nte n ts :

Step 2. Instal li ngT he F orti A P-2 22 B un it is de sig ne d for o utd oo ru se a nd may b ea tta ch ed e ith er to a po le or a wa ll. Aw a terp ro o fc on ne cto ris s up pli ed to e ns ure aw ea th erti gh t sea lfo r co nn ec tin g the P oE c ab le to th eF ort iA P-2 2 2B u nit.

T o mo u nt th eF ort iA P -2 2 2 Bu n ito n a w a ll1 . 8 VLQ JZ D OOPR XQ WE DV HD V D WH PS OD WH PDUN WK H OR FDWL RQ R IWK H PRX QWLQ J ER OWK R OHV R QD DW ZD OOV X UID FH

2 . D rillt h emo un tin g ho les in th e ma rk ed o fflo ca tio n3 . F as ten th e wa ll-mo un tb a se se cu re ly to the b ac ko fF ort iA P -22 2B u nit ,u sin g th es up pli ed h ex -he ad mo un tin gs cre w s, se e Fig ure 1 .4 . A tta ch th eF o rtiA P -22 2B u nit a nd ba se a ss emb lyto th e w allu s in gth e co nc re te mou ntin g bo lts p ro vid ed .5 . T igh te nth e mou nti ng b olts s ec ure ly .

FortiAP222B802.11A/B/G/NDUALCONCURRENTRADIOAP

Forti AP-2 22Bunit

Step 1. Unpacking

Opentheshipping cartonandcarefully unpack its contents. Thecartonshould containthefollowingitems:

FortiAP-222B unit 48V DCPoE Adapterunit w/ groundingcableandpoweradapter

1x Polestrap 4x Wall-mount bracket fasteningscrews (hex head) w/ washers

4x Pole-mount bracket fasteningscrews (Phillips head)w/ washers 4x Concretemountingbolts w/ washers

2x 5GHz WiFiantennae and2x 2.4GHz WiFiantennae 1x Pole-mount bracket

1x Wall-mount base 1x Waterproof connector

FortiAP-222B QuickStart Guide(QSG) FortiAP-222B HardwareInstallationGuide(this document)

Warranty registrationcardIf any itemis foundmissingor damaged, pleasecontact yourlocal resellerforreplacement.

PackageContents:

Step 2. InstallingTheFortiAP-222B unit is designedforoutdooruse andmay beattachedeitherto apoleor awall. Awaterproof connectoris suppliedtoensureaweathertight sealforconnecting thePoE cabletothe FortiAP-222B unit.

To mounttheFortiAP-222Buniton awall

1. 8VLQJZDOOPRXQWEDVHDVD WHPSODWHPDUNWKHORFDWLRQRIWKHPRXQWLQJ EROWKROHVRQDDWZDOO VXUIDFH2. Drillthe mountingholes inthemarked off location

3. Fasten thewall-mount basesecurely totheback of FortiAP-222B unit, usingthesuppliedhex-head mountingscrews, seeFigure1.4. Attach theFortiAP-222B unit andbaseassembly tothewall usingtheconcrete mountingbolts provided.5. Tightenthe mountingbolts securely.

FortiAP 222B

802.11A/B/G/NDUALCONCURRENTRADI OAP

FortiAP-222Bunit

FortiAP 222B

QuickStart Guide

QuickStartGuide


5/20

Connecting the FortiAP Unit

Using the provided mounting brackets, attach the FortiAP unit to a wall or pole,

as described in the FortiAP-222B Hardware Installation Guide. The PoE adapter

unit is not weatherproo and must be mounted indoors. Adequate grounding must

be provided to the FortiAP unit and the PoE adaper, compliance with your localelectrical code or regulations. Grounding lugs are provided or this purpose.

Connect the FortiAP unit as ollows:

1. Connect your region-specic AC plug adapter to the AC Adapter by inserting the

round disk into the Adapter and rotating clockwise until you hear the disk lock

in place.

2. Insert the DC plug o the power adapter into the DC IN port on the PoE adapter.

Plug the AC Adapter into a wall outlet or power strip. The PWR LED will light up.

3. Connect one end o a cross-over Ethernet cable into the Network port on the

PoE adapter. Connect the other end to the FortiGate controller or router.

4. Using the supplied weatherproo connector, connect one end o a weather-proo

straight-through Ethernet cable to the PoE port on the bottom o the FortiAP unit,

ollowing the procedure in the FortiAP-222B Install Guide. Insert the other end o

the Ethernet cable into the AP/Bridge port on the PoE adapter.

Note: The FortiAP 222B is certied or use with only the included antennas or with

the FortiAP Antenna-336R.

Page 2

AP/BRIDGE

NETWORK

AP/BRIDGE

DC IN

GROUND

FortiAP222B

802.11 A/B/G/NDUAL CONCURRENT RADIOAP

FortiAP-222B

NETWORK

To the FortiGate controller

PoE Adapter

2

Power

Adapter

Grounding

Cable

Weatherproof

Connector

RESET Button

3

1


6/20

Page 3

Conguring the FortiAP Unit

The FortiAP unit is designed to require no conguration in most networks. Zero

Conguration mode works i the unit is directly connected to the FortiGate or

FortiWi perorming the Wireless LAN Controller (WLC) unctions, or on the same

layer-2 network and subnet as the FortiGate or FortiWi unit.

I the FortiAP wireless controllers IP address cannot be determined using Zero

Conguration mode, or i the network uses static IP addresses, it can be congured

to use a static IP address.

To enable the FortiAP using Zero Confguration:

1. Ater connecting the FortiAP unit as described in the previous chapter, the unit

goes through its boot procedure and requests an IP address rom the DHCP

server.

2. I the IP address is retrieved successully, the FortiAP enters discovery mode to

locate a FortiGate or FortiWi wireless controller. The discovery modes are:

Broadcast

Multicast DHCP option 138

3. Veriy that the FortiAP has successully connected to the controller.

In the FortiGate Web-based Manager, go to WiFi Controller > Managed Access

Points > Managed FortiAP. A successully discovered unit displays an orange

circle with a question mark.

4. Select the access point and clickEdit.

5. In the State eld, selectAuthorize.

6. In theAP Profle eld, select Change, then select a prole rom the list and clickOK.

To enable the FortiAP with a static IP address:

1. Connect the FortiAP device to a separate private switch or hub, or directly

connect it to your management computer via a cross-over cable.

2. Congure the management computer to be on the same subnet as the internal

interace o the FortiAP unit:

a. Browse to the Network and Sharing Center > Change Adapter Settings >

Local Area Connection Properties > Internet Protocol Version 4 (TCP/IPv4)

Properties.

b. Change the IP address o the management computer to 192.168.1.3 and the

netmask to 255.255.255.0.

3. Use a Telnet apllication to connect to IP address 192.168.1.2.

4. Type admin in the Name eld, leave the Passwordeld blank, and press Enter.


7/20

5. Congure a static IP address or the FortiAP unit and netmask & gateway

inormation or your network, using the ollowing commands:cfg -a ADDR_MODE=STATICcfg a AP_IPADDR=xxx.xxx.xxx.xxcfg a AP_NETMASK=255.255.255.0cfg a IPGW=yyy.yyy.yyy.yyycfg a AC_IPADDR_1=zzz.zzz.zzz.zzz

where xxx is the IP address o the FortiAP unit, yyy is the Gateway IP address

and zzz is the IP address o the FortiGate Wireless Controller.

6. Save the conguration by typing the ollowing command:cfg c

7. Unplug the FortiAP unit and plug it back in order or the conguration to take

eect.

8. Move the FortiAP to the intended deployment location and connect the Ethernet

cable as described in the Connecting Your FortiAP Unit section.

9. Log in to the FortiGate controller Web-based Manager, and go to WiFi Controller> Managed Access Points > Managed FortiAP. A successully discovered unit

displays an orange circle with a question mark in the Status column.

10. Select the access point and clickEdit.

11. In the State eld, selectAuthorize.

12. In the Edit FortiAPdialog box, select Enable Wireless Radio. Leave the remaining

settings at their deault values. The conguration is downloaded rom the

FortiGate unit to the FortiAP device.

Resetting the FortiAP unit:

Following an upgrade, some old conguration items rom a previous rmware

version or wrong conguration might remain in the conguration le. This may cause

the unit to display unexpected behavior. Resetting the unit to actory deault settings

can correct this issue and will not change the rmware version.

The FortiAP unit can be reset to actory deault settings in two ways: using the CLI,

or using the hardware reset button.

To reset the unit using the CLI:1. Connect to the unit using steps 1 through 4 o the enabling the FortiAP unit using

the CLI.

2. Enter the ollowing command:

cfg -x

To reset the unit using the hardware reset button:

1. Locate the hardware reset button on the side o the PoE adapter.

2. Using an appropriate implement, press and hold the reset button or 5 seconds.The unit will reboot to actory deault settings.

For more inormation, see the Deploying Wireless Networks Guide, available on

Fortinets technical documentation website, http://docs.ortinet.com.

Page 4
http://../FAP-221B/FortiAP-221B-QuickStart.pdfhttp://docs.forticare.com/http://docs.forticare.com/http://../FAP-221B/FortiAP-221B-QuickStart.pdf


8/20

Top Bottom

PoE Adapter

1

2

1

23

AP/BRIDGE

NETWORK4 5

6 7

Technical Specications

Page 5

# Interace Type Description1 WLAN 1 N-type Two 802.11a/n (5 GHz) antenna mounts.

2 WLAN 2 N-type Two 802.11b/g/n (2.4 GHz) antenna mounts.

3 PoE Port RJ-45 Gigabit Ethernet 48V PoE input rom adapter via weatherproo

Ethernet cable. Use with a weatherproo connector.

4 Ground Copper Electrical ground connection or PoE Adapter.

5 Network RJ-45 Connection to your network.

6 AP/Bridge RJ-45 PoE output. Provides 48V o DC power and networkconnectivity to the AP.

7 DC in Provides power to PoE Adapter.

100-240V AC, 50-60Hz, 1.5A max

Hardware Description

Dimensions LxWxD: 10in x 8in x 3in (245mm x 200mm x 75mm)

Housing Weatherproo enclosure

Mount Wall or pole.

Frequency Bands (GHz) 802.11a/n: 5.15-5.35, 5.47-5.72, 5.725-5.825

802.11b/g/n: 2.400-2.484

Antenna Type N-type connector

Note: The availability o some specic channels and/or operational requency bands

are country-specic and are rmware programmed at the actory to match the intended

destination. The rmware setting is not accessible by the end user.


9/20

Cautions and Warnings

Please review the ollowing cautions and warnings.

Environmental and mounting specifcations

Operating temperature: -20 - 60C (-4 - 140F)

Storage temperature: -20 - 60C (-4 - 140F)

Humidity: 0 to 100%

Operating Altitude:


10/20

Page 7

Industry Canada Equipment Standard or Digital Equipment (ICES)

Canada

CAN ICES-3 (B) / NMB-3 (B)

This device complies with RSS-210 o the Industry Canada Rules. Operation is subject to

the ollowing two conditions: (1) This device may not cause harmul intererence, and (2) this

device must accept any intererence received, including intererence that may cause undesired

operation.

Ce dispositi est conorme la norme CNR-210 dIndustrie Canada applicable aux appareils

radio exempts de licence. Son onctionnement est sujet aux deux conditions suivantes: (1)

le dispositi ne doit pas produire de brouillage prjudiciable, et (2) ce dispositi doit accepter

tout brouillage reu, y compris un brouillage susceptible de provoquer un onctionnement

indsirable.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set orth or an uncontrolled

environment. This equipment should be installed and operated with minimum distance 21cm

between the radiator & your body.Dclaration dexposition aux radiations:

Cet quipement est conorme aux limites dexposition aux rayonnements IC tablies pour un

environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de

21 cm de distance entre la source de rayonnement et votre corps.

Caution: The device or the band 5150-5250 MHz is only or indoor usage to reduce potential

or harmul intererence to co-channel mobile satellite systems. High-power radars are allocated

as primary users (i.e. priority users) o the bands 5250-5350 MHz and 5650-5850 MHz and

that these radars could cause intererence and/or damage to LE-LAN devices.

Avertissement: Les dispositis onctionnant dans la bande 5 150-5 250 MHz sont rservsuniquement pour une utilisation lintrieur an de rduire les risques de brouillage prjudiciable

aux systmes de satellites mobiles utilisant les mmes canaux. De plus, les utilisateurs

devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns

utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5

650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux

dispositis LAN-EL.

This device has been designed to operate with an antenna having a maximum gain o 5dBi.

Antenna having a higher gain is strictly prohibited per regulations o Industry Canada. The

required antenna impedance is 50 ohms.Under Industry Canada regulations, this radio transmitter may only operate using an antenna

o a type and maximum (or lesser) gain approved or the transmitter by Industry Canada. To

reduce potential radio intererence to other users, the antenna type and its gain should be so

chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary

or successul communication.

Ce dispositi a t conu pour onctionner avec une antenne ayant un gain maximal de dBi 5.

Une antenne gain plus lev est strictement interdite par les rglements dIndustrie Canada.

Limpdance dantenne requise est de 50 ohms.

Conormment la rglementation dIndustrie Canada, le prsent metteur radio peutonctionneravec une antenne dun type et dun gain maximal (ou inrieur) approuv pourlmetteur par

Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention

des autres utilisateurs, il aut choisir le type dantenne et son gain de sorte que lapuissance

isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement

dune communication satisaisante.


11/20

Page 8

European Conormity (CE) - EU

This is a Class B product. In a domestic environment, this product may cause radio intererence,

in which case the user may be required to take adequate measures.

National Communications Commission (NCC) Taiwan

NCC

NCC

GroundingEnsure your Fortinet product is connected and properly grounded to a lightning and surge

protector. WAN or LAN connections that enter the premises rom outside the building should

be connected to an Ethernet CAT5 (10/100 Mb/s) surge protector.

Shielded Twisted Pair (STP) Ethernet cables should be used whenever possible rather than

Unshielded Twisted Pair (UTP).

Do not connect or disconnect cables during lightning activity to avoid damage to your

Fortinet product or personal injury.

Electrostatic discharge (ESD) can damage Fortinet equipment. Only perorm the procedures

described in this document rom an ESD workstation. I no such station is available, you can

provide some ESD protection by wearing an anti-static wrist strap and attaching it to an

available ESD connector or other bare metal object.

Adequate grounding must be provided to the FortiAP unit and the PoE adapter. Grounding

lugs are provided on both units or this purpose. Consult a certied electrician to ensure that all

grounding and cabling is installed in compliance with the local electrical code.

Caution: For devices that contain a battery there is a risk o explosion i battery is replaced by

an incorrect type. Recycle used batteries according to your local regulations.

Caution: This equipment is to be connected only to PoE networks without routing to the

outside plant.


12/20

Documentation and Links

The ollowing Fortinet web pages provide inormation and resources or your

Fortinet product:

1. Customer Service & Support:https://support.ortinet.com

On this page you can create a support account with Fortinet, register and

manage your products, download updates, rmware images and release notes,

and create technical support tickets.

2. Technical Documentation:http://docs.ortinet.com

This page provides the most up-to-date versions o Fortinet publications or the

entire amily o Fortinet products.

3. Knowledge Base:http://kb.ortinet.com

This page provides Fortinet technical documentation, such as troubleshooting,

how-to articles, example congurations , FAQs, technical notes, and more.

4. Technical Discussion Forums:https://support.ortinet.com/orum

This page allows you to communicate with other customers and Fortinetpartners about Fortinet products, services, and conguration issues in a orum

environment.

5. Training Services:http://training.ortinet.com

This page provides course descriptions, availability, schedules, and locations o

training programs in your area.

6. FortiGuard Threat Research and Response:http://www.ortiguard.com

This page provides up-to-date inormation on vulnerabilities and threats, andincludes a virus scanner, Internet Protocol (IP) signature look-up, web ltering

tools, and related inormation.

Tools and Documentation CD

The tools and documents on this CD are current as o shipping time.

Comments on Technical Documentation

Please send comments or inormation about any errors or omissions in this or any

Fortinet technical documents to [email protected].

Page 9
http://support.fortinet.com/http://docs.forticare.com/http://kc.forticare.com/http://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://kc.forticare.com/http://docs.forticare.com/http://support.fortinet.com/


13/20

Register Your Product

I you did not register your Fortinet product using the FortiExplorer wizard,

please register your product now.

Register

Register your Fortinet product in order to receive:

TechnicalSupportNewproductfeaturesProtectionfromnewthreats

Enregistrer

Vous devez enregistrer le produit pour recevoir:

SupporttechniqueNouvellesfonctionnalitesduproduitProtection

contre de nouvelles menaces

Registra

La reistrazione ti permette di usuruire di:

SupportoTecnicoNuovefunzionalitaProteezionedalleultime

minaccce

Registrar

Debe registrar el producto para recibir:

ApoyotcnicoNuevasfuncionalidadesdelproductoProteccincontra

ataques

Web: https://support.ortinet.com/

Toll ree: 1 866 648 4638

Phone: 1 408 486 7899

Fax: 1 408 235 7737

Email: [email protected]

Page 10
http://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdfhttp://../AppData/Local/Adobe/InDesign/Version%207.0/en_US/Caches/InDesign%20ClipboardScrap1.pdf


14/20

Product License Agreement

The parties to this agreement are you, the end customer, and either (i) where you have purchased your Product within the Americas, Fortinet, Inc., or (ii) where youhave purchased your Product outside o the Americas, Fortinet Singapore Private Limited (each reerred to herein as Fortinet) .CAREFULLY READ THE FOLLOW-

ING LEGAL AGREEMENT (THE OR THIS AGREEMENT OR EULA). USE OF FORTINET PRODUCT(S) AND ANY UPDATES THERETO, INCLUDING HARDWARE APPLIANCE

PRODUCTS, SOFTWARE AND FIRMWARE INCLUDED THEREIN BY FORTINET, AND STAND-ALONE SOFTWARE PRODUCTS SOLD BY FORTINET (TOGETHER, THE PROD-

UCTS) CONSTITUTES ACCEPTANCE BY YOU OF THE PROVISIONS IN THIS AGREEMENT. FORTINET SHALL NOT BE BOUND BY ANY ADDITIONAL AND/OR CONFLICTING

PROVISIONS IN ANY ORDER, RELEASE, ACCEPTANCE OR OTHER WRITTEN CORRESPONDENCE OR OTHER WRITTEN OR VERBAL COMMUNICATION UNLESS EXPRESSLY

AGREED TO IN A WRITING SIGNED BY THE GENERAL COUNSEL OF FORTINET. YOUR INSTALLATION OR USE OF ANY PRODUCT REPRESENTS AGREEMENT TO THE TERMS

HEREIN, AS AMENDED OR UPDATED FROM TIME TO TIME IN FORTINETS DISCRETION BY FORTINET PUBLISHING AN AMENDED OR UPDATED VERSION. IF YOU DO NOT

AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT START THE INSTALLATION PROCESS OR USE THE PRODUCTS. IF YOU DO NOT AGREE TO THE PROVISIONS

OF THIS AGREEMENT, YOU SHOULD IMMEDIATELY, AND IN NO EVENT LATER THAN FIVE (5) CALENDAR DAYS AFTER YOUR RECEIPT OF THE PRODUCT RETURN THE

PRODUCTS TO THE LOCATION WHERE YOU OBTAINED THEM FOR A FULL REFUND FROM THE PARTNER SELLING TO YOU.

1. License Grant.

This is a license, not a sales agreement, between you and Fortinet. The term Sotware, as used throughout this Agreement, includes all Fortinet and third party

rmware and sotware provided to you with, or incorporated into, Fortinet appliances and any stand-alone sotware provided to you by Fortinet, with the exception

o any open source sotware contained in Fortinets Products which is discussed in detail in section 15 below, and the term Sotware includes any accompanyingdocumentation, any updates and enhancements o the sotware or rmware provided to you by Fortinet, at its option. Fortinet grants to you a non-transerable (except

as provided in section 5 (Transer) and section 15 (Open Source Sotware) below), non-exclusive, revocable (in the event o your ailure to comply with these terms

or in the event Fortinet is not properly paid or the applicable Product) license to use the Sotware solely or your internal business purposes (provided, i a substantial

portion o your business is to provide managed service provider services to your end-customers, you may use the Sotware embedded in FortiGate and supporting

hardware appliances to provide those services, subject to the other restrictions in this Agreement), in accordance with the terms set orth in this Agreement and subject

to any urther restrictions in Fortinet documentation, and solely on the Fortinet appliance, or, in the case o blades, CPUs or databases, on the single blade, CPU or

database on which Fortinet installed the Sotware or, or stand-alone Sotware, solely on a single computer running a validly licensed copy o the operating system or

which the Sotware was designed, or, in the case o blades, CPUs or databases, on a single blade, CPU or database. For clarity, notwithstanding anything to the contrary,

all licenses o Sotware to be installed on blades, CPUs or databases are licensed on a per single blade, solely or one blade and not or multiple blades that may be

installed in a chassis, per single CPU or per single database basis, as applicable. The Sotware is in use on any Fortinet appliances when it is loaded into temporary

memory (i.e. RAM). You agree that, except or the limited, specic license rights granted in this section 1, you receive no license rights to the Sotware.

2. Limitation on Use.

You may not attempt to, and, i you are a corporation, you are responsible to prevent your employees and contractors rom attempting to, (a) modiy, translate, reverse

engineer, decompile, disassemble, create derivative works based on, sublicense, or distribute the Sotware; (b) rent or lease any rights in the Sotware in any orm toany third party or make the Sotware available or accessible to third parties in any other manner; (c) except as provided in section 5, transer assign or sublicense right

to any other person or entity, or (d) remove any proprietary notice, labels, or marks on the Sotware, Products, and containers.

3. Proprietary Rights.

All rights, title, interest, and all copyrights to the Sotware and any copy made thereo by you and to any Product remain with Fortinet. You acknowledge that no title

to the intellectual property in the Sotware or other Products is transerred to you and you will not acquire any rights to the Sotware or other Products except or the

specic license as expressly set orth in section 1 (License Grant) above.

4. Term and Termination.

Except or evaluation and beta licenses or other licenses where the term o the license is limited per the evaluation/beta or other agreement or in the ordering docu-

ments, the term o the license is or the duration o Fortinets copyright in the Sotware. Fortinet may terminate this Agreement, and the licenses and other rights herein,

immediately without notice i you breach or ail to comply with any o the terms and conditions o this Agreement. You agree that, upon such termination, you will cease

using the Sotware and any Product and either destroy all copies o the Fortinet documentation or return all materials to Fortinet. The provisions o this Agreement,

other than the license granted in section 1 (License Grant), shall survive termination.

5. Transer.

I you are a Fortinet contracted and authorized reseller or distributor o Products, you may transer (not rent or lease unless specically agreed to in writing by Fortinet)

the Sotware to one end user on a permanent basis, provided that: (i) you ensure that your customer and the end user receives a copy o this Agreement, is bound by

its terms and conditions, and, by selling the Product or Sotware, you hereby agree to enorce the terms in this Agreement against such end user, (ii) you at all times

comply with all applicable United States export control laws and regulations, and (iii) you agree to reund any ees paid to you by an end user who purchased Product(s)

rom you but does not agree to the terms contained in this Agreement and thereore wishes to return the Product(s) as provided or in this Agreement. Further, i you

are a non-authorized reseller o Products, you are not authorized to sell Product(s) or Sotware, but, regardless, by selling Product(s) or Sotware, you hereby agree

you are bound by the restrictions and obligations herein and are bound to: (i) ensure that your customer and the end user receive a copy o this Agreement and are

bound in ull by all restrictions and obligations herein (ii) enorce the restrictions and obligations in this Agreement against such customer and/or end user, (iii) comply

with all applicable United States export control laws and regulations and all other applicable laws, and (iv) reund any ees paid to you by a customer and/or end user

who purchased Product(s) rom you but does not agree to the restrictions and obligations contained in this Agreement and thereore wishes to return the Product(s) as

provided or in this Agreement. Notwithstanding anything to the contrary, distributors, resellers and other Fortinet partners (a) are not agents o Fortinet and (b) are not

authorized to bind Fortinet in any way.

6. Limited Warranty.

Fortinet provides this limited warranty or its product only to the single end-user person or entity that originally purchased the Product rom Fortinet or its authorizedreseller or distributor and paid or such Product. The warranty is only valid or Products which are registered on Fortinets Support Website: https://support.ortinet.com;

or on the TalkSwitch support website: http://global.talkswitch.com; or such other website as provided by Fortinet. For the below sotware warranty to start, registration

must take place within three hundred sixty-ve (365) days rom the date the Product was originally shipped rom Fortinets acilities or the warranty is null and void

and will not be honored. For the hardware warranty, such warranty starts on the earlier o the date o Product registration on Fortinets Support Website or ninety (90)

days rom the date that the Product was originally shipped rom Fortinets acilities. It is the Fortinet distributors and resellers responsibility to make clear to the end

user the date the product was originally shipped rom Fortinet, and it is the end users responsibility to understand the original ship date rom the party rom which the

end user purchased the product. All warranty claims must be submitted in writing to Fortinet beore the expiration o the warranty term or such claims are waived in

ull, i.e. ninety (90) days rom the earlier o registration or the automatically started term or hardware and spare parts claims and three hundred sixty-ve (365) days

rom registration within three hundred sixty-ve (365) days rom shipment or sotware claims. Fortinet provides no warranty or any beta, donation or evaluation

Products, or any spare parts not purchased directly rom Fortinet by the end-user, or any accessories, or or any stand-alone sotware.

Fortinet warrants that the hardware portion o the Products, including spare parts unless noted otherwise (Hardware) will be ree rom material deects in workman-

ship as compared to the unctional specications or the period set orth as ollows and applicable to the Product type (Hardware Warranty Period): a three hundred

sixty-ve (365) day limited warranty or the Hardware excluding spare parts, and, or spare parts, solely a ninety (90) days limited warranty. Fortinets sole obligation

shall be to repair or replace the deective Hardware at no charge to the original owner. This obligation is exclusive o transport ees, labor or installation costs, and anyPage 11


15/20

other cost which are not directly associated to the Product. Such repair or replacement will be rendered by Fortinet at an authorized Fortinet service acility as deter-

mined by Fortinet. The replacement Hardware need not be new or o an identical make, model, or part; Fortinet may, in its discretion, replace the deective Hardware

(or any part thereo) with any reconditioned Product that Fortinet reasonably determines is substantially equivalent (or superior) in all material respects to the deective

Hardware. The Hardware Warranty Period or the repaired or replacement Hardware shall be or the greater o the remaining Hardware Warranty Period or ninety days

rom the delivery o the repaired or replacement Hardware. I Fortinet determines in its reasonable discretion that a material deect is incapable o correction or that it

is not practical to repair or replace deective Hardware, the price paid by the original purchaser or the deective Hardware will be reunded by Fortinet upon return to

Fortinet o the deective Hardware. All Hardware (or part thereo) that is replaced by Fortinet, or or which the purchase price is reunded, shall become the property o

Fortinet upon replacement or reund.

Fortinet warrants that the sotware portion o Hardware Products will substantially conorm to Fortinets then current unctional specications or the Sotware, as set

orth in the applicable documentation or a period o ninety (90) days (Sotware Warranty Period), i the Sotware is properly installed on approved Hardware and

operated as contemplated in its documentation. Fortinets sole obligation shall be to repair or replace the non-conorming Sotware with sotware that substantially

conorms to Fortinets unctional specications. Except as otherwise agreed by Fortinet in writing, the replacement Sotware is provided only to the original licensee,and is subject to the terms and conditions o the license granted by Fortinet or the Sotware. The Sotware Warranty Period shall extend or an additional ninety (90)

days ater any replacement sotware is delivered. I Fortinet determines in its reasonable discretion that a material non-conormance is incapable o correction or that

it is not practical to repair or replace the non-conorming Sotware, the price paid by the original licensee or the non-conorming Sotware will be reunded by Fortinet;

provided that the non-conorming Sotware (and all copies thereo) is rst returned to Fortinet. The license granted respecting any Sotware or which a reund is given

automatically terminates immediately upon reund. For purpose o the above hardware and sotware warranties, the term unctional specications means solely

those specications authorized and published by Fortinet that expressly state in such specications that they are the unctional specications reerred to in this section

6 o this Agreement, and, in the event no such specications are provided to you with the Sotware or Hardware, there shall be no warranty on such Sotware.

7. Disclaimer o Other Warranties and Restrictions.

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED IN SECTION 6 ABOVE, THE PRODUCT AND SOFTWARE ARE PROVIDED AS-IS WITHOUT ANY WARRANTY OF ANY KIND

INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY, IMPLIED OR EXPRESS WARRANTY OF MERCHANTABILITY, OR WARRANTY FOR FITNESS FOR A PARTICULAR

PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH

IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS FROM THE DATE OF ORIGINAL SHIPMENT FROM FORTINET. EXCEPT AS EXPRESSLY COVERED UNDER

THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF

THE PRODUCT. NOTWITHSTANDING ANYTHING TO THE CONTRARY, THE HARDWARE WARRANTY PERIOD DISCUSSED ABOVE DOES NOT APPLY TO CERTAIN FORTINETPRODUCTS, INCLUDING FORTIFONE WHICH HAS A NINETY (90) DAY LIMITED WARRANTY AND FORTITOKEN WHICH HAS A 365 DAY WARRANTY FROM THE DATE OF

SHIPMENT FROM FORTINETS FACILITIES, AND THE SOFTWARE WARRANTY DOES NOT APPLY TO CERTAIN FORTINET PRODUCTS, INCLUDING FORTIGATE-ONE AND

VDOM SOFTWARE.

The warranty in Section 6 above does not apply i the Sotware, Product or any other equipment upon which the Sotware is authorized to be used (a) has been altered,

except by Fortinet or its authorized representative, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Fortinet, (c)

has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; or (d) is licensed or beta, evaluation, donation, testing or demonstration

purposes or or which Fortinet does not charge a purchase price or license ee. In the case o beta, testing, evaluation, donation or ree Sotware or Product, the end

user acknowledges and agrees that such Sotware or Product may contain bugs or errors and could cause system ailures, data loss and other issues, and the end user

agrees that such Sotware or Product is provided as-is without any warranty whatsoever, and Fortinet disclaims any warranty or liability whatsoever. An end users

use o evaluation or beta Sotware or Product is limited to thirty (30) days rom original shipment unless otherwise agreed in writing by Fortinet.

8. Governing Law.

This Agreement and the warranty herein shall be governed by the laws o the state o Caliornia, without regards to the conficts o laws principles thereo.

9. Limitation o Liability.

TO THE MAXIMUM EXTENT PERMITTED BY LAW AND NOTWITHSTANDING ANYTHING TO THE CONTRARY, FORTINET IS NOT LIABLE UNDER ANY CONTRACT, NEGLI-GENCE, TORT, STRICT LIABILITY, INFRINGEMENT OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT OR SERVICE OR ANY DAMAGES

OF ANY KIND WHATSOEVER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL,

LOSS OF PROFIT, LOSS OF OPPORTUNITY, LOSS OR DAMAGE RELATED TO USE OF THE PRODUCT OR SERVICE IN CONNECTION WITH HIGH RISK ACTIVITIES, DAMAGE

TO PERSONAL OR REAL PROPERTY, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, COMPUTER SECURITY BREACH, COMPUTER VIRUS INFECTION, LOSS

OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT INCLUDING ANY PRODUCT RETURNED TO FORTINET FOR WARRANTY

SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THE LIMITED WARRANTY IN SECTION

6 ABOVE, EVEN IF FORTINET HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE LIMITED WARRANTY IS REPAIR,

REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT AS SPECIFICALLY STATED IN SECTION 6 ABOVE.

10. Import / Export Requirements; FCPA Compliance.

You are advised that the Products may be subject to the United States Export Administration Regulations and other import and export laws; diversion contrary to

United States law and regulation is prohibited. You agree to comply with all applicable international and national laws that apply to the Products as well as end user,

end-use, and destination restrictions issued by U.S. and other governments. For additional inormation on U.S. export controls see www.bis.doc.gov. Fortinet assumes

no responsibility or liability or your ailure to obtain any necessary import and export approvals. You represent that neither the United States Bureau o Industry and

Security nor any other governmental agency has issued sanctions against you or otherwise suspended, revoked or denied your export privileges. You agree not to useor transer the Products or any use relating to nuclear, chemical or biological weapons, or missile technology, unless authorized by the United States Government by

regulation or specic written license. Additionally, you agree not to directly or indirectly export, import or transmit the Products contrary to the laws or regulations o

any other governmental entity that has jurisdiction over such export, import, transmission or use. Furthermore, you represent that you understand, and you hereby

agree to comply with, all requirements o the U.S. Foreign Corrupt Practices Act and all other applicable laws. For beta, testing, evaluation, donation or ree Products

and/or related services, you hereby agree, represent and warrant to Fortinet that (a) receipt o the Products and/or services comply with all policies and you have

obtained all necessary approvals or such Products and/or services, (b) the Products and/or services are not provided in exchange or Fortinet maintaining current busi-

ness or or new business opportunities, and (c) the Products and/or services are not being received or the benet o, and are not being transerred to, any government

entity, representative or aliate.

11. U.S. Government End Users.

The Sotware and accompanying documentation are deemed to be commercial computer sotware and commercial computer sotware documentation, respec-

tively, pursuant to DFAR Section 227.7202 and FAR Section 12.212, as applicable. Any use, modicat ion, reproduction, release, perormance, display or disclosure

o the Sotware and accompanying documentation by the United States Government shall be governed solely by the terms o this Agreement and shall be prohibited

except to the extent expressly permitted by the terms o this Agreement and its successors.

12. Tax Liability.

You agree to be responsible or payment o any sales or use taxes imposed at any time on this transaction.

13. General Provisions.

Except as specically permitted and required in section 5 (Transer) above, you agree not to assign this Agreement or transer any o the rights or obligations under

this Agreement without the prior written consent o Fortinet. This Agreement shall be binding upon, and inure to the benet o, the successors and permitted assigns o

the parties. The United Nations Convention on Contracts or the International Sales o Goods is expressly excluded. In the event o any claim arising out o this Agree-

ment, the parties hereby submit to the jurisdiction o the ederal and state courts located in Santa Clara County, Caliornia, as applicable. This Agreement and other

Fortinet agreements may be amended or supplemented only by a writing that reers explicitly to the agreement signed on behal o both parties, or, or this Agreement,

as otherwise expressly provided in the lead-in above Section 1 above, provided, notwithstanding anything to the contrary and except or this Agreement which may be

amended or updated as expressly provided in the lead-in above Section 1 above, or any amendment or other agreement to be binding on Fortinet, such amendment

or other agreement must be signed by Fortinets General Counsel. No waiver will be implied rom conduct or ailure to enorce rights nor eective unless in a writing

signed on behal o the party against whom the waiver is asserted. I any part o this Agreement is ound unenorceable, that part will be enorced to the maximum

extent permitted and the remainder shall continue in ull orce and eect. You acknowledge that you have read this Agreement, understand it, and agree to be bound by

its terms and conditions. Page 12


16/20

14. Privacy.

By entering into this Agreement, you agree and consent that Fortinet may collect, retain and use personal inormation supplied, including name, address, and e-mail

address o individuals and payment details and other inormation. Personal inormation will be used primarily to provide services and product unctionality to end us-

ers. Fortinet may also use personal inormation or additional communication, subject to an opt-out notice provided by you in writing per below. Fortinet may engage

other companies and individuals to perorm unctions on its behal, such as payment processing, order ulllment, marketing programs and customer service. Fortinet

may share personal inormation with such subcontractors in order to perorm these and other unctions, but such subcontractors may not use your personal inorma-

tion or other purposes, unless you agree. By entering into this Agreement, you agree and consent to the transer the supplied personal inormation to Fortinets oces

in the United States and elsewhere, or the purposes stated above. For more detailed inormation on the collection, use and transer o your personal inormation, and

or inormation on how to opt out o or unsubscribe rom the communications described above, please read the Fortinet privacy policy on the Fortinet web site (www.

Fortinet.com).

15. Open Source Sotware.

Fortinets products may include sotware modules that are licensed (or sublicensed) to the user under the GNU General Public License, Version 2, o June 1991 (GPL)or GNU Lesser General Public License, Version 2.1, o February 1999 (LGPL) or other open source sotware licenses which, among other rights, permit the user touse,

copy, modiy and redistribute modules, or portions thereo, and may also require attribution disclosures and access to the source code (Open Source Sotware). The

GPL requires that or any Open Source Sotware covered under the GPL, which is distributed to someone in an executable binary ormat, that the source code also be

made available to those users. For any Open Source Sotware covered under the GPL, the source code is made available on this CD or download package. I any Open

Source Sotware licenses require that Fortinet provide rights to use, copy or modiy a Open Source Sotware program that are broader than the rights granted in this

agreement, then such rights shall take precedence over the rights and restrictions herein. Fortinet will provide, or a charge refecting our standard distribution costs,

the complete machine-readable copy o the modied sotware modules. To obtain a complete machine-readable copy, please send your written request, along with

a check in the amount o US $25.00, to General Public License Source Code Request, Fortinet, Inc., 1090 Kier Rd, Sunnyvale, CA 94086 USA. In order to receive the

modied sotware modules, you must also include the ollowing inormation: (a) Name, (b) Address, (c) Telephone number, (d) E-mail Address, (e) Product purchased

(i applicable), () Product Serial Number (i applicable). All open source sotware modules are licensed ree o charge. There is no warranty or these modules, to the

extent permitted by applicable law. The copyright holders provide these sotware modules AS-IS without warranty o any kind, either expressed or implied. In no

event will the copyright holder or the open source sotware be liable to you or damages, including any special, incidental or consequential damages arising out o the

use or inability to use the sotware modules, even i such holder has been advised o the possibility o such damages. A ull copy o this license, including additional

open source sotware license disclosures and third party license disclosures applicable to certain Fortinet products, may obtained by contacting Fortinets Legal Depart-ment at [email protected].

GNU GENERAL PUBLIC LICENSE GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Sotware Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms o this General

Public License. The Program, below, reers to any such program or work, and a work based on the Program means either the Program or any derivative work

under copyright law: that is to say, a work containing the Program or a portion o it, either verbatim or with modications and/or translated into another language.

(Hereinater, translation is included without limitation in the term modication.) Each licensee is addressed as you.

Activities other than copying, distribution and modication are not covered by this License; they are outside its scope. The act o running the Program is not restricted,

and the output rom the Program is covered only i its contents constitute a work based on the Program (independent o having been made by running the Program).

Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies o the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriatelypublish on each copy an appropriate copyright notice and disclaimer o warranty; keep intact all the notices that reer to this License and to the absence o any war-

ranty; and give any other recipients o the Program a copy o this License along with the Program. You may charge a ee or the physical act o transerring a copy, and

you may at your option oer warranty protection in exchange or a ee.

2. You may modiy your copy or copies o the Program or any portion o it, thus orming a work based on the Program, and copy and distribute such modications or

work under the terms o Section 1 above, provided that you also meet all o these conditions:

a) You must cause the modied les to carry prominent notices stating that you changed the les and the date o any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived rom the Program or any part thereo, to be licensed as a whole

at no charge to all third parties under the terms o this License.

c) I the modied program normally reads commands interactively when run, you must cause it, when started running or such interactive use in the most ordinary way,

to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and

that users may redistribute the program under these conditions, and telling the user how to view a copy o this License. (Exception: i the Program itsel is interactive

but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modied work as a whole. I identiable sections o that work are not derived rom the Program, and can be reasonably consideredindependent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when

you distribute the same sections as part o a whole which is a work based on the Program, the distribution o the whole must be on the terms o this License, whose

permissions or other licensees extend to the entire whole, and thus to each and every part regardless o who wrote i t.. Thus, it is not the intent o this section to claim

rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution o derivative or collective works based

on the Program. In addition, mere aggregation o another work not based on the Program with the Program (or with a work based on the Program) on a volume o a

storage or distribution medium does not bring the other work under the scope o this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable orm under the terms o Sections 1 and 2 above

provided that you also do one o the ollowing:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms o Sections1 and 2 above on a medium

customarily used or sotware interchange; or,

b) Accompany it with a written oer, valid or at least three years, to give any third party, or a charge no more than your cost o physically perorming source distribu-

tion, a complete machine-readable copy o the corresponding source code, to be distributed under the terms o Sections 1 and 2 above on a medium customarily used

or sotware interchange; or,

c) Accompany it with the inormation you received as to the oer to distribute corresponding source code. (This alternative is allowed only or noncommercial distribu-tion and only i you received the program in object code or executable orm with such an oer, in accord with Subsection b above.)

Source code or a work means the preerred orm o the work or making modications to it. For an executable work, complete source code means all the source

code or all modules it contains, plus any associated interace denition les, plus the scripts used to control compilation and installation o the executable. However,

as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary orm) with the major components

(compiler, kernel, and so on) o the operating system on which the executable runs, unless that component itsel accompanies the executable. I distribution o execut-

able or object code is made by oering access to copy rom a designated place, then oering equivalent access to copy the source code rom the same place counts

as distribution o the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modiy, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modiy, sublicense

or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, rom you under

this License will not have their licenses terminated so long as such parties remain in ull compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modiy or distribute the Program or its

derivative works. These actions are prohibited by law i you do not accept this License. Thereore, by modiying or distributing the Program (or any work based on the

Program), you indicate your acceptance o this License to do so, and all its terms and conditions or copying, distributing or modiying the Program or works based on

Page 13


17/20

it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license rom the original licensor to copy, distrib-

ute or modiy the Program subject to these terms and conditions. You may not impose any urther restrictions on the recipients exercise o the rights granted herein.

You are not responsible or enorcing compliance by third parties to this License.

7. I, as a consequence o a court judgment or allegation o patent inringement or or any other reason (not limited to patent issues), conditions are imposed on you

(whether by court order, agreement or otherwise) that contradict the conditions o this License, they do not excuse you rom the conditions o this License. I you can-

not distribute so as to satisy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the

Program at all. For example, i a patent license would not permit royalty-ree redistribution o the Program by all those who receive copies directly or indirectly through

you, then the only way you could satisy both it and this License would be to rerain entirely rom distribution o the Program.

I any portion o this section is held invalid or unenorceable under any particular circumstance, the balance o the section is intended to apply and the section as a

whole is intended to apply in other circumstances.

It is not the purpose o this section to induce you to inringe any patents or other property right claims or to contest validity o any such claims; this section has thesole purpose o protecting the integrity o the ree sotware distribution system, which is implemented by public license practices. Many people have made generous

contributions to the wide range o sotware distributed through that system in reliance on consistent application o that system; it is up to the author/donor to decide i

he or she is willing to distribute sotware through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence o the rest o this License.

8. I the distribution and/or use o the Program is restricted in certain countries either by patents or by copyrighted interaces, the original copyright holder who places

the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among

countries not thus excluded. In such case, this License incorporates the limitation as i written in the body o this License.

9. The Free Sotware Foundation may publish revised and/or new versions o the General Public License rom time to time. Such new versions will be similar in spirit

to the present version, but may dier in detail to address new problems or concerns. Each version is given a distinguishing version number. I the Program species

a version number o this License which applies to it and any later version, you have the option o ollowing the terms and conditions either o that version or o any

later version published by the Free Sotware Foundation. I the Program does not speciy a version number o this License, you may choose any version ever published

by the Free Sotware Foundation.

10. I you wish to incorporate parts o the Program into other ree programs whose distribution conditions are dierent, write to the author to ask or permission. For

sotware which is copyrighted by the Free Sotware Foundation, write to the Free Sotware Foundation; we sometimes make exceptions or this. Our decision will be

guided by the two goals o preserving the ree status o all derivatives o our ree sotware and o promoting the sharing and reuse o sotware generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT

WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE

ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL

NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/

OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE

OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER

PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

GNU LESSER GENERAL PUBLIC LICENSEVersion 2.1, February 1999

Copyright (C) 1991, 1999 Free Sotware Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any sotware library or other program which contains a notice placed by the copyright holder or other authorized party saying it

may be distributed under the terms o this Lesser General Public License (also called this License). Each licensee is addressed as you.

A library means a collection o sotware unctions and/or data prepared so as to be conveniently linked with application programs (which use some o those unctions

and data) to orm executables.

The Library, below, reers to any such sotware library or work which has been distributed under these terms. A work based on the Library means either the

Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion o it, either verbatim or with modications and/or translated

straightorwardly into another language. (Hereinater, translation is included without limitation in the term modication.)

Source code or a work means the preerred orm o the work or making modications to it. For a library, complete source code means all the source code or all

modules it contains, plus any associated interace denition les, plus the scripts used to control compilation and installation o the library.

Activities other than copying, distribution and modication are not covered by this License; they are outside its scope. The act o running a program using the Library isnot restricted, and output rom such a program is covered only i its contents constitute a work based on the Library (independent o the use o the Library in a tool or

writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies o the Librarys complete source code as you receive it, in any medium, provided that you conspicuously and appropri-

ately publish on each copy an appropriate copyright notice and disclaimer o warranty; keep intact all the notices that reer to this License and to the absence o any

warranty; and distribute a copy o this License along with the Library. You may charge a ee or the physical act o transerring a copy, and you may at your option oer

warranty protection in exchange or a ee.

2. You may modiy your copy or copies o the Library or any portion o it, thus orming a work based on the Library, and copy and distribute such modications or work

under the terms o Section 1 above, provided that you also meet all o these conditions:

a) The modied work must itsel be a sotware library.

b) You must cause the les modied to carry prominent notices stating that you changed the les and the date o any change.

c) You must cause the whole o the work to be licensed at no charge to all third parties under the terms o this License.

d) I a acility in the modied Library reers to a unction or a table o data to be supplied by an application program that uses the acility, other than as an argument

passed when the acility is invoked, then you must make a good aith eort to ensure that, in the event an application does not supply such unction or table, the acilitystill operates, and perorms whatever part o its purpose remains meaningul.

These requirements apply to the modied work as a whole. I identiable sections o that work are not derived rom the Library, and can be reasonably considered

independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when

you distribute the same sections as part o a whole which is a work based on the Library, the distribution o the whole must be on the terms o this License, whose

permissions or other licensees extend to the entire whole, and thus to each and every part regardless o who wrote it. Thus, it is not the intent o this section to claim

rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution o derivative or collective works based on

the Library. In addition, mere aggregation o another work not based on the Library with the Library (or with a work based on the Library) on a volume o a storage or

distribution medium does not bring the other work under the scope o this License.

3. You may opt to apply the terms o the ordinary GNU General Public License instead o this License to a given copy o the Library. To do this, you must alter all the

notices that reer to this License, so that they reer to the ordinary GNU General Public License, version 2 instead o to this License. (I a newer version than version 2

o the ordinary GNU General Public License has appeared, then you can speciy that version instead i you wish.) Do not make any other change in these notices.

Once this change is made in a given copy, it is irreversible or that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative

works made rom that copy. This option is useul when you wish to copy part o the code o the Library into a program that is not a library.

Page 14


18/20


19/20


20/20

Fortiap-222B-quickstart

Documents

Transcript of Fortiap-222B-quickstart