Formwork - thacampbell.typepad.com · Formwork INTRODUCTION .....3
FORMWORK PANELS - HASSLACHER NORICA TIMBER...Nailing, drilling or screwing through the Formwork...
Transcript of FORMWORK PANELS - HASSLACHER NORICA TIMBER...Nailing, drilling or screwing through the Formwork...
NATURAL BEAUTY FOR CONCRETE SURFACES.
FORMWORK PANELS
AREAS OF APPLICATION Concrete formwork systems Wall formwork Floor formwork Formwork for engineered structures (bridge constructions, foundations)
Tunnel formwork
ADVANTAGES Dimensionally stable through a locked lay-up Almost no crack occurence High bending strength and stiffness Sanded surface for perfect results Lower costs due to a higher number of reuses High endurance due to gluing all around
01AT A GLANCE
PRODUCT STANDARDÖNORM B 3023
THICKNESSES21 mm27 mm
FORMATSWidths: 500 mmLengths: 1,000 to 3,000 mm in 500 mm steps
SURFACESanded and sealed with melamine resin
02OVERVIEW
EDGESEdges glued with end strips, sealed with acrylic coating
WOOD SPECIESCover layer: Spruce/firMiddle layer: Spruce, fir, pine
SUSTAINABILITYThe HASSLACHER Group stands for a careful use of wood as a resource. Our raw materials come from sustainable and controlled forestry. Our locations are certified according to the strict PEFCTM standards.
HASSLACHER NORICA TIMBER | FORMWORK PANELS2
BONDINGAlkaline-resistant, water and weatherproof bonding
MOISTURE CONTENT15% ±3% at time of delivery
MASS IN KG/M2
21 mm thickness: 10.0 kg/m²27 mm thickness: 12.5 kg/m²
DENSITYApproximately 450 kg/m³ to 500 kg/m³
SHRINKAGE AND SWELLING BEHAVIOURPerpendicular to panel planeau,90 = 0.24% per 1% change in moisture content
Parallel to the panel planeau,0 = 0.01% per 1% change in moisture content
SURFACE Quality Selection Standard quality Surface sanded Treated with durable melamine resin sealant
DIMENSIONAL TOLERANCESin accordance to EN 13353
Length, width: limit deviations ±2 mmPanel thickness: 0.5 mm within a panel, limit deviations ±1 mm
Edge straightness: 1.0 mm/mPerpendicularity: 1.0 mm/m
03TECHNICAL DATA
FORMWORK PANELS | HASSLACHER NORICA TIMBER 3
04TABLES FOR PRELIMINARY DESIGN
DEFLECTION OF FORMWORK PANELS LIP BLED D.D.3-LAYERED, THICKNESS 27 MM
DEFLECTION OF FORMWORK PANELS LIP BLED D.O.O.3-LAYERED, THICKNESS 21 MM
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75
20.0 kN/m2
15.0 kN/m2
12.5 kN/m2
10.0 kN/m2
7.5 kN/m2
5.0 kN/m2
2.5 kN/m2
De
fle
ctio
n (
mm
)
Width between supports L (m)
L L L L
Belastung q [kN/m²] Load q (kN/m2)
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75
De
fle
ctio
n (
mm
)
30 kN/m2
25 kN/m2
20 kN/m2
15 kN/m2
10 kN/m2
5 kN/m2
2 kN/m2
L L L L
Belastung q [kN/m²] Load q (kN/m2)
Width between supports L (m)
HASSLACHER NORICA TIMBER | FORMWORK PANELS4
05DURABLEMAINTENANCE, STORAGE, CLEANING AND TREATMENT.
RECOMMENDATIONS FOR USEIn order to maximize the number of use cycles and the longest endurance, the following recommendations have to be considered.
The plates are to be treated with an appropriate form oil and sprayed with sufficient water immediately before concreting.
After removing the shuttering, the plates should be cleaned as fast as possible and stored on a level surface.
Suitable forming oils are recommended for maintenance. Please use them according to the manufacturer’s instructions.
Nailing, drilling or screwing through the Formwork panels should be minimised, since they impair the Formwork panels’ protective coating, and therefore its endurance.
FORMWORK PANELS | HASSLACHER NORICA TIMBER 5
06PRODUCT PORTFOLIO
PANEL FORMATSThickness 21 mm, 27 mmFormats 500 x 1,000 mm, 500 x 1,500 mm, 500 x 2,000 mm, 500 x 2,500 mm, 500 x 3,000 mm
PACKAGING UNITS
Thickness Format [mm] Pieces per packet m² per packet
21 mm
500 x 1,000 2 x 50 50 m²
500 x 1,500 2 x 50 75 m²
500 x 2,000 2 x 50 100 m²
500 x 2,500 2 x 50 125 m²
500 x 3,000 2 x 50 150 m²
27 mm
500 x 1,000 40 20 m²
500 x 1,500 40 30 m²
500 x 2,000 40 40 m²
500 x 2,500 40 50 m²
500 x 3,000 40 60 m²Other packaging units are also available on request. Every packet is wrapped in a plastic cover.
HASSLACHER NORICA TIMBER | FORMWORK PANELS6
Glued laminated timber
Surfaced timber
Cross laminated timber
Pellets
Glued ceiling systems
Sawn timber
Glued laminated timber – special components
Formwork panels
Structural finger jointed solid timber & GLT®
Special products
Glued solid timber Duo/Trio
Pallets & packaging solutions
HASSLACHER NORICA TIMBER’S PRODUCT PORTFOLIO
07
FORMWORK PANELS | HASSLACHER NORICA TIMBER 7
HASSLACHER groupFeistritz 1 | 9751 Sachsenburg | AustriaT +43 4769 22 49-0 | F +43 4769 22 49-129 [email protected] | hasslacher.com
UP
PE
RC
UT.
at
HNT0210_DE_201902