Form Release Agent Selection Guide
-
Upload
nox-crete-products-group -
Category
Documents
-
view
229 -
download
1
description
Transcript of Form Release Agent Selection Guide
Form Release Agents
ChembetonUse On: Handset Forms; B-B Plywood; Steel Forms; Aluminum Forms
■■ Economical, general purpose.
■■ Petroleum based formulation.
■■ Dries fast and resists removal from rain showers and foot traffic.
(800) 669-2738
Nox-Crete PCEUse On: HDO, PSF & CBF Overlaid Plywood Forms; Steel Forms; Plastic & Rubber Form Liners; Fiberglass Forms
■■ 100% biodegradable.
■■ Water based formulation.
■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.
■■ Dries to form a non-slippery film which is ideal for raised horizontal decks.
■■ Resists removal by heavy rain, foot traffic, running water and scouring during concrete placement common with vertical pours.
■■ Maximum performance with low slump, high density, pozzolan-containing or superplasticized concrete mix designs.
■■ Reduces binding.
®
®Nox-Crete Form CoatingUse On: Handset Forms, B-B Plywood; Overlaid Plywood Forms; Steel Forms; Plastic Form Liners
■■ Exceptional performance on non- overlaid plywood, dimensional lumber and MDO plywood.
■■ Available in petroleum based, water based and biodegradable formulations.
■■ Extends the life of wood forms by reducing the absorption of destructive alkaline bleed water.
■■ Produces smooth, uniformly white concrete surfaces with no staining and reduced surface voids (bugholes).
®
This Symbol Indicates Products Available In A Version For Building Green, Respecting The Environment And Protecting People.
This Symbol Indicates Products Available In A 100% Biodegradable Version.
SELECTION GUIDE FORM PERFORMANCE LEVEL SUBSTRATE MAXIMUM STANDARD
Aluminum Alumi-Nox Alumi-Con Chembeton Pro-Release MDO/B-B Plywood Nox-Crete Form Coating Chembeton Pro-Release Utility Release
Overlaid Plywood Bio-Nox Chembeton Faced Handset Forms Nox-Crete Form Coating Pro-Release Utility Release HDO, PSF & CBF Bio-Nox Chembeton Overlaid Plywood Nox-Crete Form Coating Pro-Release Nox-Crete PCE Release Agent #10
Steel Bio-Nox Chembeton Nox-Crete Form Coating Pro-Release Nox-Crete PCE Release Agent #10
Plastic/Fiberglass Bio-NoxForms & Form Liners Nox-Crete Form Coating Nox-Crete PCE Release Agent #10
Rubber Form Liners Bio-Nox Nox-Crete Form Coating E Nox-Crete PCE
Precast Bio-Nox Pallet-Nox Precast Release #80 Release Agent #10 IP
Not Sure Which Release Agent Is Right For Your
Application?
Our Knowledgeable Technical Support Staff
Can Help!
(800) 669-2738
Product Data Sheets & MSDS Available Online
www.nox-crete.com
Alumi-ConUse On: Aluminum Forms
■■ Super concentrated for maximum economy.
■■ Variable dilution rate to meet specific performance needs.
■■ Dries fast. Non-slippery.
■■ Resists removal by normal rain showers.
■■ Non-staining, low odor.
■■ Stays mixed longer due to improved emulsion technology.
■■ Won’t freeze prior to dilution with water.
■■ Dilutes and mixes easily with water using Nox-Crete’s drum-mounted Mix Station - requires no measuring.
®
Alumi-NoxUse On: Aluminum Forms
■■ Maximum performance for improved concrete appearance with reduced spalling, bugholes and surface voids and with no staining.
■■ Available in petroleum and water based formulations.
■■ Performs well with concrete mix designs utilizing chemical and mineral admixtures, such as fly ash and blast furnace slag.
■■ Low viscosity petroleum based version is easily sprayable at temperatures below freezing.
®
24-Hour Access To The Information You Need
Bio-NoxUse On: Handset Forms; Overlaid Plywood Forms; Steel Forms; Plastic & Rubber Form Liners
■■ 100% biodegradable.
■■ Water based formulation.
■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.
■■ Can be used with aggressive stripping schedules where forms are stripped and repoured within 24 hours.
■■ Does not oxidize or turn tacky.
®
Consult current product data sheet before final selection and application of any Nox-Crete form release agent.
Power Sprayer
Release Agent #10Use On: HDO, PSF & CBF Overlaid Plywood Forms; Steel Forms; Plastic & Fiberglass Forms
■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.
■■ Available in petroleum based and water based formulations.
■■ Ideal for forms which see daily use or aggressive stripping schedules.
■■ Dries fast. Non-slippery.
APPLICATION EQUIPMENT
www.nox-crete.com
Pallet-NoxUse On: Precast Pipe Header Rings; Overlaid Plywood, Steel & Aluminum Paver Pallets
■■ 100% biodegradable.
■■ Water based formulation.
■■ Ideal for dry cast concrete production.
■■ Combines chemical reactivity and physical barrier type release properties.
■■ Ideal for dip tank applications.
■■ Variable dilution rate to meet specific performance needs.
■■ Pallet and header rings remove easily, minimizing concrete damage and related patching and repair.
■■ Produces smooth, uniformly white concrete surfaces with no staining and substantially fewer surface voids (bugholes).
®
Precast Release #80Use On: HDO, PSF & CBF Overlaid Plywood Forms; Steel Forms; Plastic & Fiberglass Forms In Precast Applications
■■ Combines chemical reactivity and physical barrier type release properties.
■■ Available in petroleum and water based formulations.
■■ Ideal for steam-cured precast concrete and precast mix designs using high amounts of cement, fly ash, silica fume or high-range water reducers.
■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.
®
Pro-ReleaseUse On: Handset Forms; B-B Plywood; Steel Forms; Aluminum Forms
■■ Available in ready-to-use and concentrated formulation.
■■ Economical and water based.
■■ Specially designed for sticky concrete mix designs, such as those containing pozzolans.
■■ Dries fast. Non-slippery.
■■ Available with Winter Guard™ additive for cold weather application and storage. Winter Guard™ prevents freezing and protects the product from freeze damage.
■■ Resists removal by normal rain showers.
■■ Non-staining, pleasant odor.
■■ Concentrated version dilutes and mixes easily with water using Nox-Crete’s drum-mounted Mix Station - requires no measuring.
®
Utility ReleaseUse On: Handset Forms; B-B Plywood
■■ Super concentrated for maximum economy.
■■ Variable dilution rate to meet specific performance needs.
■■ Dries fast. Non-slippery.
■■ Resists removal by normal rain showers.
■■ Non-staining, low odor.
■■ Stays mixed longer due to improved emulsion technology.
■■ Won’t freeze prior to dilution with water.
■■ Dilutes and mixes easily with water using Nox-Crete’s drum-mounted Mix Station - requires no measuring.
®
®
Perfect Form & Concrete Sprayer
Ideal Form & Concrete Sprayer
Hand Pump Sprayers
Parts & Service For All Application Equipment Available Directly From Nox-Crete
Mix StationMixes and dilutes Nox-Crete’s super concentrated
form release agents in one easy step!
Nox-Crete developed the world’s first chemically active
form release agent in 1956.
• Nox-Crete form release agents are non-staining and leave no residue
• Nox-Crete form release agents extend wood form panel life - up to double the number of pours
• Your overlaid plywood forms were probably produced by a mill using and recommending Nox-Crete form release agents for longer life of their form panels
• The crisp, positive release of Nox-Crete form release agents eliminates form damage during stripping
• Nox-Crete form release agents produce uniformly colored concrete surfaces with minimal surface voids
-
01/2012
Nox-Crete Products Group1444 S 20th Street Omaha, NE 68108 USA
Phone (800) 669-2738 (402) 341-1976www.nox-crete.com