Forklift truckwith front forks

Flexible and powerful electric front forklift trucks, ideal for small spaces and special applications

Ergos III 8-10 TA3 ac

FrameThe monobloc construction of the chassis ensures maximum stability and enhanced mechanical resistance during stacking and travelling, maintain-ing high residual capacities even at maximum height. The battery compart-ment can be easily opened by simply lifting the seat support, simplifying the daily and periodical battery recharge and check operations.

DrivePowerful and reliable ac traction motors, able to satisfy even the most demanding requests for performance, providing the necessary amount of power every time, as the speed of the truck can be adjusted by changing

the position of the accelerator.

SteeringHydraulic steering resistant to any type of mechanical stress, for safe and precise handling, keeping the truck under control at all times. Adjustable steering wheel for unique driving comfort.

Hydraulic functionsPowerful and silent ac lift motor for enhanced performance. All hydrau-lic functions are controlled by a microprocessor for precise and safe load handling.

The Ergos III 8-10 TA3 front forklift trucks are equipped with two powerful ac traction motors, are very compact, highly manoeuvrable and very efficient. Ideal for small spaces, with turning radius of less than 1,200 mm and aisles below 3,000 mm; the OMG front forklift trucks have as standard feature the exclusive T.O.S. tilting system (Tilting OMG System), which guarantees a considerable increase in residual capacities, as the centre of gravity of the forklift is not affected by the inclination of the mast, usually a limiting factor for this category of products. The battery compartment is accessible by opening the side of the truck provided with rollers for lateral battery extraction (standard feature), facilitating battery replacement in case of intensive use throughout multiple shifts.

α°β°

β° α°

T.O.S. Tilting OMG System

Operator’s compartmentResult of a meticulous ergonomic study that combines operating comfort with modern industrial design. All controls are easy to reach, ensuring en-hanced productivity, precision and efficiency:• comfortable adjustable seat;• depth adjustable steering wheel;• non-slip footrest;• LCD display showing all information necessary for optimal driving:

• parking brake indicator, warning lights (neutral position, controller overheating, motor overheating);

• operating hours indicator, speedometer, speed limiter “ON” indica-tor (tortoise), operating mode indicator S/P/E, S=super P=power E=economy;

• battery level indicator.

Lateral battery extractionStandard lateral battery extraction system for readily replacement in case of heavy duty appli-cations and multiple work shifts.

MastsMasts made of cold extruded profiles highly resistant to twisting and bend-ing, available in the following versions that ensure high visibility:• duplex and triplex with large overall free lift between 3,300 and 6,200

mm;• braking system with lift cylinders for smooth movement without jolts

and enhanced load stability;• built-in lateral shift adjustment to prevent changing the centre of gravity

and for maintaining optimal residual capacities at any height.• Brakes• Independent braking systems available on all the products in this range:• regenerative braking by reversing the running direction;• regenerative braking by releasing the accelerator pedal;• manual parking brake;• mechanical braking on load wheels.

Electronic systemThe Ergos III is equipped with regenerative braking system that can be enabled by:

• releasing the accelerator pedal;• reversing the running direction;• pressing the brake pedal.These controls check and enable all machine functions and allow unlimited adjustments for performance optimisation, adapting the truck to the opera-tion to be carried out. All hydraulic functions, electric drive and braking pa-rameters can be set electronically, according to customer’s requirements.

Accessories and special features

total free lift for duplex column forward/reverse control with double pedal

total free lift for triplex column reverse light

T.O.S. tilting system on frame headlights

built-in forks sid adjustment headlights / taillights

lateral battery extraction system semi-cabin (front and rear glass with wipers) PVC doors

single lateral battery extraction roller with wheels no-marking tyres

reverse buzzer and beacon light safety grid for bulky loads

superelastic tyres additional hydraulic function

anti roll-back system lexan top cover

electronic speed control 24V 575Ah traction battery 24V 100A current rectifier

electronic braking system 24V 625Ah traction battery 24V 100A current rectifier

standard optional

Standard masts Capacities:

DescriptionLowered mast

height

h1

Forks stroke

h3

Total lift

h3+s

Extended mast height

h4

Free lift

h2

Forks support plate tilting sys-

tem fwd/bwd α/α (°)

with shifter(t) c=500 mm

Ergos III 8 TA3 ac Ergos III 10 TA3 ac

Duplex

mm 2,195 3,170 3,200 3,730 3 / 6 0.8 1.0

mm 2,445 3,670 3,200 4,230 3 / 6 0.8 1.0

mm 2,595 3,970 4,000 4,530 3 / 6 0.7 0.9

mm 2,920 4,570 4,600 5,155 3 / 6 0.6 0.8

Triplex-GAL

mm 2,040 4,370 4,400 4,370 1,460 3 / 6 0.6 0.8

mm 2,240 4,970 5,000 5,570 1,660 3 / 6 0.5 0.7

mm 2,490 5,570 5,600 6,170 1,910 3 / 6 0.4 0.6

mm 2,740 6,170 6,200 6,770 2,160 3 / 6 0.4 0.6

* optional

m1m2

y x

l2 l

l1

c

Q

h2

h3

h4

h7

h6

h1

s

α°β°

b1

e

b3

a/2Ast

a/2

Wa

b10

b11

OMG S.r.l. Single member companyRegistered office:Via Johann Strauss, 42 - 20831 Seregno (MB)

Production site and head office:P.S. Pascoletto, 3 - 46023 Gonzaga (MN) ItalyTel. +39 0376 526011 Fax +39 0376 588008www.omgindustry.com - info@omgindustry.com

Characteristics 1.1 Manufacturer OMG S.r.l. Single member company

1.2 Model Ergos III 8 TA3 ac Ergos III 10 TA3 ac

1.3 Operation electrical

1.4 Operator position ride-on

1.5 Capacity Q t 0.8 1.0

1.6 Load centre of gravity c mm 500

1.8 Load distance x mm 350

1.9 Centre distance y mm 1,015

Weights 2.1 Truck weight incl. battery (see line 6.5) kg 1,950 2,295

2.2 Load on wheels (with load) kg 2,720 / 370 3,045 / 245

2.3 Load on wheels (without load) kg 1,250 / 1,040

Wheels Frame

3.1 Wheels and tyres superelastic

3.2 Front wheel size 16x6-8

3.3 Rear wheels size 4.00 4

3.5 Number of front / rear wheels (x = drive) N° 2x / 2

3.6 Front track b10 mm 725

3.7 Rear track b11 mm 195

Basedimensions

4.1 Mast/forks support plate inclination, forward/backward α/α ° 3 / 6

4.2 Lowered mast height h1 mm 2,195

4.3 Free lift h2 mm

4.4 Forks lifting stroke h3 mm 3,170

4.5 Extended mast height h4 mm 3,730

4.7 Upper edge overhead guard height (cabin) h6 mm 1,970

4.8 Seat height / Platform height h7 mm 950

4.12 Tow hook height h10 mm

4.19 Overall length l1 mm 2,670

4.20 Length including forks heel l2 mm 1,520

4.21 Overall width b1/b2 mm 850

4.22 Forks size s/e/l mm 30 / 100 / 1,150

4.23 Forks support plate ISO 2328, class/type A, B II A

4.24 Forks support plate width b3 mm 800

4.25 Width over forks b5 mm 750

4.31 Clearance under the mast with load m1 mm 90

4.32 Clearance at mid stroke m2 mm 120

4.33 Working aisle width with 1000 x 1200 transversal pallet Ast mm 2,820

4.34 Working aisle width with 800 x 1200 longitudinal pallet Ast mm 2,920

4.35 Turning radius Wa mm 1,170

Performance 5.1 Speed with / without load km/h 10 / 11.5

5.2 Lifting speed with / without load m/s 0.30 / 0.45 0.28 / 0.45

5.3 Lowering speed with/without load m/s 0.45 / 0.38

5.5 Max hook stress with / without load N 3,000 / 7,300

5.7 Max. feasible gradient with / without load S2 30 min % 7 / 15 6 / 14

5.8 Max. feasible gradient with / without load S2 5 min % 10 / 20 14 / 19

5.9 Acceleration with / without load s 7.0 / 6.0

5.10 Service brake hydraulic

Electric motors

6.1 Traction motor, performance with S2 60 min kW 3 x 2

6.2 Lift motor, power S3 15% kW 6

6.3 Battery as per DIN 43531 / 35 / 36 A, B, C, no no

6.4 K5 battery voltage, nominal capacity V/Ah 24 / 460 24 / 500

6.5 Battery weight kg 400 452

Battery dimensions L / B / H mm 820x320x610

6.6 Power consumption as per VDI cycle kW/h 3.8 3.9

Miscellaneous 8.1 Type of electronic system AC inverter

8.2 Equipment operating pressure bar 150

8.3 Oil flow rate for equipment l/min 15

8.4 Noise threshold as per EN 12 053 dB(A) < 70

8.5 Tow hook, model / type DIN

* optional

Technical data sheet referring to pallet truck in standard version; data determined in compliance with VDI 2198. These values may differ if your product is fitted with other types of wheels and tires, supports and accessories. All data and images herein are indicative, OMG S.r.l. Single member company reserves the right to modify the documentation without prior notice.