FORESTRY Price list 15€¦ · Working width (m) 1,60 1,80 2,00 2,25 2,50 Total width (m) 2,09 2,29...

F O R E S T R Y Price l ist

15

NEW AGRICULTURAL AND FORESTRY AGE

U N I Q U E

E F F I C I E N T

S T R O N G

D I F F E R E N T

I N N O V AT I V E

4

22

MULCHERS

ROTARY BRUSH CUTTERS

38ANNEXES

ale (HIGH STReNGTH STeel)The steel has two main parts in their behavior, the elastic and plastic. The elastic part is a steel enabling a deformation and subjecting this to recover its initial properties. When we apply a force in the steel and it crosses the line between elastic and plastic, it will be deformed permanently. Each steel has a load value in the passing of the elastic to the plastic zone. The high strength steels have a high values in this load. The A.L.E. cold forming steel has a yield stress value (point from which appears the deformation), which duplicates the value of a traditional steel. TMC Cancela incorporates A.L.E. steel in the frame of its machines to provide an extra quality, avoiding cracks and breaks in the most demanding working conditions.

Hdx (WeaR ReSISTaNT STeel)It’s a steel that has in its composition many elements which give excellent properties against abrasion and wear without compromising important steel factors such as bending and welding. The wear-resistant values increase steel double lifetime with respect to traditional steel. Wear-resistant TMC Cancela steels incorporate all the elements that are in direct contact with the ground, such as skates, plates, inner shells and counterblades.

fTS (faN TRaNSMISSION SYSTeM)System of refrigeration incorporated in the pulleys of the mulchers in order to evacuate the heat of the pulleys and drive transmission during the operation.

dUal SpeedSystem that allows to change the input speed configuration in the gearbox interchanging the position of the pulleys. With this system we can work with different tractors and change quickly the input speed in the machine. With PTO to 540 rpm we get a leverage ratio in the pulleys (the bigger pulley is the drive one). With 1.000 rpm input we need a reduction ratio for obtaining the same rotor speed. In this case the drive pulley is the small one. This system ensures the work with any type of tractor and switch from one speed input to another quickly.

WIdeST Patented side openings in rotary brush cutter skids for maximum utilization of working width of the machine. At the same time a better mulching of the material is ensured due to the blockage in the cavity created in the opening “window”.

eSb (exTeRNal SHafT beaRING)Built-in system applied to the side extension shafts of the gearbox and drive lines. The bearing of of the transmission extension is positioned on the side of the frame ensuring a very close distance between the pulley and this bearing, reducing dramatically the bending in the shaft. This will increases the life of the shaft, reduce the bearing loads and consequently also decrease the temperature in the drive line.

bOlTOpSystem for assemblying the hammers to the rotor with special socket connection between bolts and lugs. The bolt head is completely embedded into the lug and ensures a precise fit, preventing rotation and loosening. The bolts are 10.9 quality and Ø27 mm with lock nut. This is the most robust assembly system in the market for swinging hammers, ensuring no bolts breakage and avoiding downtimes during work.

zMZero Maintenance patented system, built at the joint between central and lateral gearboxes of agricultural and forestry rotary brush cutters. Ensures zero maintenance on connections through a special adjustment joint between two grooved tapered shafts.

flOaTDamping system incorporated in the three point hitch of the agricultural mulchers with lateral parallelogram displacement, which enables the decoupling of the tractor linkage and the adaptation of the machine to the ground. This system eliminates the traditional bolt joint which was very problematic and created many breaks and deformations. This new system allows to built a three point hitch much more robust according to expectations and demands of the machine. A double advantage is obtained with this device: acts as a damping system and reduces the impact on the frame of the machine and on the tractor lifting arms, especially when driving at high speed during transport by roads.

SIdeSTepSystem for overcoming obstacles on the sides of forestry and agricultural mulchers. The pulleys surround plates are rigid and the reinforcement fairings make a wedge effect ensuring the lateral rigidity while avoiding obstacles snagging during work. This system reinvented traditional caps that did not act like a real protection, only made the barrier function between pulleys and the environment, but the impacts in some cases bended the cover causing serious problems to the drive line. With the Sidestep, the impacts to the sideways of the machines translate into simple happenings of daily work without any inconvenience to the integrity of the drive line.

flOW UpFlow Up is a cutting system consisting in blades with flaps that cause a suction of the material (grass, low brush…) in the back part of the cutting area, ensuring a better and cleaner cut. These blades are assembled to concave plate with bolts and bushes. The special shape of the rotor ensures optimum sliding as close to the ground as possible without damaging the topsoil. Assembled in the range of rotary brush cutters intended for green spaces, large areas and farming works.

TMC

SYST

EMS

MULCHERS

CV

cmWORKING WIdTH

MOd. 060

150

160

180

190

200

210

225

250

pg.

TFS • • • 70-110 6

TFS2 • • 90-130 8

TFK • • • • 100-180 10

TFX • • • • • 130-250 12

TFZ • • • 150-300 14

TFT • • 200-360 16

TFR • 300-500 18

TFC • 150-250 20

060

150

160

180

190

200

210

225

250

0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232

MULCHER

www.tmccancela.com |+34 981 695 232

w w w. t m c c a n c e l a . c o m 76

TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST

MOD. TFS-150 TFS-180 TFS-200

TECHNICAL FEATURES

Working width (m) 1,50 1,80 2,00

Total width (m) 1,88 2,18 2,38

Required input power (Hp) 70 80 95

Max. allowed power (Hp) 110

Rotor cutting diameter (mm) 413

Gearbox input speed (rpm) 540

Nr. of hammersf03 34 42 46

f04 2 2 2

Counterblades 3 fixed rows

Coupling category Cat. 2

Nr. of belts - type 6 - xpb

Skids bolted adjustable (2 positions)

pTO shaft bondioli SH type

Weight (kg) 1.172 1.284 1.351

REF. MOD. HM7X15 HM7X18 HM7X20

OPTIONS

050 Mechanical rear pushing frame

254 Skids to work a little bit deeper

KM1.F03.7X Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.7X Maintenance kit (basic kit + 6 belts)

Ø 250 mm

01 Body built in high strength steel.

02 4 chain curtains for front protection and 2 chain curtains on rear hood.

03 Hydraulic hood to improve the material entrance.

04 Sidestep system on body sides.

05 Toolbox compartment built-in frame.

06 Skids with 2 height positions.

07 Rotor with fixed hammers with helical disposition.

08 Transmission with 6 XPB belts.

09 Gearbox with built-in free-wheel, input to 540 rpm and 1”3/4 Z6.

10 Reinforced PTO shaft.

11 Hammers with 2 carbide tips model F03 + F04.

B E L T Sx6

TFS

F03

F04

01

05

02

03

06

04

06

02

0907


MULCHER




Ø 275 mm

MOD. TFS2-180 TFS2-200

TECHNICAL FEATURES

Working width (m) 1,80 2,00

Total width (m) 2,29 2,49

Required input power (Hp) 110 125



Gearbox input speed (rpm) 1.000

Nr. of hammersf03 42 46

f04 2 2



Nr. of belts - type 12 xpb

Skidsbolted adjustable

(2 positions)


Weight (kg) 1.531 1.602

REF. MOD. HM8V18 HM8V20

OPTIONS



KM1.F03.8V Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.8V Maintenance kit (basic kit + 12 XPB belts)


02 4 chain curtains for front protection and 2 chain curtains on rear hood.





07 Transmission with 12 XPB belts and ESB system.

08 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z6.



TFS2B E L T Sx6

B E L T Sx6 + F0

3

F04

01

05

03

04

02

03 06


MULCHER




MOD. TFK-160 TFK-180 TFK-200 TFK-225

TECHNICAL FEATURES

Working width (m) 1,60 1,80 2,00 2,25

Total width (m) 2,06 2,26 2,46 2,71

Required input power (Hp) 100 120 130 145




Nr. of hammersf03 36 44 48 54

f04 2 2 2 2

Counterblades 2 fixed rows + 2 replaceable rows




Transmission bondioli SH type

Weight (kg) 1.520 1.625 1.745 1.910

REF. MOD. HM9W16 HM9W18 HM9W20 HM9W03

OPTIONS


121 Hydraulic rear pushing frame with raker teeth


KM1.F03.9W Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.9W Maintenance kit (basic kit + 10 XPB belts)

Ø 325 mm

01 Body built in high strength steel with special design in the front for improving the

material entrance.

02 4 chain curtains for front protection + 1 extra chain curtains in the middle area.

03 Coupling to tractor Cat. 2 with fast coupling balls.









12 2 replaceable rows of counterblades.

TFKB E L T Sx5

B E L T Sx5 + F0

3

F04

02

03

05

01

06

04

05

0706


MULCHER




MOD. TFX-160 TFX-180 TFX-200 TFX-225 TFX-250

TECHNICAL FEATURES

Working width (m) 1,60 1,80 2,00 2,25 2,50

Total width (m) 2,09 2,29 2,49 2,74 2,99

Required input power (Hp) 130 140 145 160 180




Nº de hammersf03 36 44 48 54 58

f04 2 2 2 2 2






Weight (kg) 1.926 2.098 2.178 2.271 2.374

REF. MOD. HM8X16 HM8X18 HM8X20 HM8X03 HM8X25

OPTIONS




KM1.F03.8X Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.8X Maintenance kit (basic kit + 12 XPB belts)

Ø 375 mm

01 Body built in high strength steel with special design in the front to improve the

material entrance.

02 Chain curtains for front protection + extra chain curtains in the middle area.





07 Rotor with fixed hammers double helical disposition.





TFX

F03

F04

02

05

06

04

07

05

0601-02

B E L T Sx6

B E L T Sx6 +


MULCHER




MOD. TFZ-200 TFZ-225 TFZ-250

TECHNICAL FEATURES


Total width (m) 2,49 2,74 2,99



Rotor cutting diameter (mm) 575,5


Nr. of hammersf05 (Stump) / f11 (Heavy) 34 40 46

f13 (Stump) / f12 (Heavy) 2 2 2

Counterblades 1 fixed row + 4 replaceable rows

Coupling category Cat. 3N




Weight (kg) 2.884 3.004 3.148

REF. MOD. HM5U20 HM5U03 HM5U25

OPTIONS



055 Kit turbo

057 Skids for deeper work*

243 Rotor Heavy (hammers F11 + F12)

244 Rotor Super (hammers F03 + F04)

245 Rotor Multi (hammers F01 + F04)

KM1.F05.5U Maintenance basic kit (2 hammers F05 + 2 bolts + grease) KM2.F05.5U Maintenance kit (basic kit + 12 XPB belts) KM1.F03.5U Maintenance basic kit (2 hammers F03 + 2 bolts + grease) KM2.F03.5U Maintenance kit (basic kit + 12 XPB belts) KM1.F11.5U Maintenance basic kit (2 hammers F11 + 2 bolts + grease) KM2.F11.5U Maintenance kit (basic kit + 12 XPB belts)


material entrance.

02 4 chain curtains for front protection + 2 extra chain curtains in the middle.

03 Coupling to tractor Cat. 3N with fast coupling balls.

04 3rd hydraulic point with permanent aligning device (patent pending).

05 Hydraulic hood with “Superfinish” system.


07 Skids with 2 height positions and side protection.

08 Rotor with replaceable shafts, with fixed hammers with helical disposition.

09 Hammers with carbide tips and different configurations.




13 Replaceable counterblades on body frame and on hydraulic hood.

14 Hammers with 3 carbide tips TMC Cancela F05+F13 (standard).

TFZB E L T Sx6

B E L T Sx6 +

05

06

07

08

Ø 500 mm

F11

F12

F01

F03

F04

F05

MultiSuper

Stump

Heavy

F13

04

0106

02

* This option excludes the Turbo Kit


MULCHER




MOD. TFT-225 TFT-250

TECHNICAL FEATURES




Max. allowed power (Hp) 360 360



Nr. of hammersf05 (Stump) / f11 (Heavy) 40 46

f13 (Stump) / f12 (Heavy) 2 2

Counterblades 1 fixed row + 4 replaceable rows


Nr. of belts - type 12 - xpC

Skidsbolted adjustable

(2 positions)


Weight (kg) 3.178 3.295

REF. MOD. HM0X03 HM0X25

OPTIONS



055 Kit turbo




245 Rotor Multi (hammers F01 + F04)

KM1.F05.0X Maintenance basic kit (2 hammers F05 + 4 bolts + grease) KM2.F05.0X Maintenance kit (basic kit + 12 belts XPC) KM1.F03.0X Maintenance basic kit (2 hammers F03 + 4 bolts + grease) KM2.F03.0X Maintenance kit (basic kit + 12 belts XPC) KM1.F11.0X Maintenance basic kit (2 hammers F11 + 4 bolts + grease) KM2.F11.0X Maintenance kit (basic kit + 12 belts XPC)

01 Body built in high strength steel with special design in the front

to improve the material entrance.









10 Transmission with 12 XPC belts and ESB system.





TFTB E L T Sx6

B E L T Sx6 +

01

05

06

07

01 03 08

F11

F12

F01

F03

F04

F05

MultiSuper

Stump

Heavy

Ø 600 mm

F13

* This option excludes the Turbo Kit0604

02


MULCHER




MOD. TFR-225

TECHNICAL FEATURES

Working width (m) 2,25

Total width (m) 2,88

Required input power (Hp) 360




Nr. of hammersf05 (Stump) /f11 (Heavy) 40

f13 (Stump) /f12 (Heavy) 2

Counterblades

2 fixed rows + 2

replaceable rows

Coupling categoryCat. 3/ Cat

4N

Nr. of belts - type 12 - xpC

Skidsbolted

adjustable(2 positions)


Weight (kg) 4.440

REF. MOD. HM1W03

OPTIONS



055 Kit turbo


124 Kit HD 500 HP



KM1.F05.1W Maintenance basic kit (2 hammers F05 + 4 bolts + grease) KM2.F05.1W Maintenance kit (basic kit + 12 belts XPC) KM1.F03.1W Maintenance basic kit (2 hammers F03 + 4 bolts + grease) KM2.F03.1W Maintenance kit (basic kit + 12 belts XPC) KM1.F11.1W Maintenance basic kit (2 hammers F11 + 4 bolts + grease) KM2.F11.1W Maintenance kit (basic kit + 12 belts XPC)

Ø 700 mm


material entrance.














TFRB E L T Sx6

B E L T Sx6 +

06

02

F11

F12

F03

F04

F05

SuperStump

Heavy

01

06

05

07

F13

04



MULCHER




MOD. TFC-060

TECHNICAL FEATURES

Working width (m) 0,60

Total width (m) 1,17

Required input power (Hp) 150




Nr. of hammersf13 16

f07 6


Nr. of belts - type 12 xpC

SkidsSliding bolted

adjustable height control

Roller with hydraulic

adjustment (as option)

Roller diameter / shaft (mm) 510/55

pTO shaft bondioli SH

Weight (kg) 2.175

REF. MOD. HM2W06

OPTIONS

125 Rear roller for compacting the soil

KM1.F13.2W Maintenance basic kit (2 hammers F13 + 4 bolts + grease) KM2.F13.2W Maintenance kit (basic kit + 12 belts XPC)


02 4 chain curtains for front protection.

03 Coupling to tractor Cat. 2.

04 Hydraulic rear hood.



07 Hardox inner shell in body.






TFCB E L T Sx6

B E L T Sx6 +

01

06

02

300 mm depth

Ø 500 mm

F07

08

04

05

F13

ROTARY BRUSH CUTTERS

MOd. 130

140

150

160

170

180

190

200

210

220

240

270

300

320

pg.

D3R • • • • • • 50-100 24

D5R • • • • • 85-300 26

D5F • • 130-300 28

R3 • • • 70-95 30

R4 • • • 85-250 32

R5 • • • • 150-300 34

130

140

150

160

170

180

190

200

210

220

240

270

300

320

cmWORKING WIdTH

CV

ROTARY BRUSH CUTTER

2524

TMC CANCELA FORESTRY PRICE LISTwww.tmccancela.com |+34 981 695 232

w w w. t m c c a n c e l a . c o m

TMC CANCELA FORESTRY PRICE LIST

MOD. D3R-130 D3R-140 D3R-150 D3R-160 D3R-170 D3R-180

TECHNICAL FEATURES

Working width (m) 1,30 1,40 1,50 1,60 1,70 1,80

Total width (m) 1,42 1,52 1,62 1,72 1,82 1,92

Required input power (Hp) 55 60 75 85 90 95



Nr. of rotors 1

Nr. of chains 4


Skids adjustable in height (3 positions) with Widest system

adjustable height control Skids

pTO shaft pTO shaft with clutch

fix model weight (kg) 476 549 583 628 695 761

Shifting model weight (kg) 563 637 674 721 784 848

Hydraulic cylinder stroke (mm) 400 400 400 500 500 500

Working reachmechanical (mm) 570-730 620-780 670-830 720-880 770-930 820-980

hydraulic (mm) 850-850 900-900 950-950 1.050-1.050 1.100-1.100 1.150-1.150

REF. FIX MODEL VM9B13 VM9B14 VM9B15 VM9B16 VM9B17 VM9B18

REF. SHIFTING MODEL VM0B13 VM0B14 VM0B15 VM0B16 VM0B17 VM0B18

01 Body with internal reinforcements.

02 Front and rear chain curtains for protection.

03 Adjustable in height rounded skids with Widest system.

04 Rear bent pins for guiding the brush when working backwards.

05 Three point linkage made of steel sheet with steel plate tensioners.

06 Hydraulic shifting three point linkage with nylon bushes for guiding

(shifting models).

07 Rotor with 2 cutting height levels.

08 Chains assembled to the rotor with connecting links.

09 PTO shaft with clutch.

10 Gearbox with 540 rpm input and

1”3/8 Z6 (D3R-130-140) / 1”3/4 Z20 (D3R-150-180).

D3R

RV0

7St

anda

rd

01

06

05

03

06

05

02

02

04

03 1004

ROTARY BRUSH CUTTER

2726




MOD. D5R-150 D5R-160 D5R-170 D5R-180 D5R-200

TECHNICAL FEATURES

Working width (m) 1,50 1,60 1,70 1,80 2,00

Total width (m) 1,62 1,72 1,82 1,92 2,12

Required input power (Hp) 85 90 110 120 140

Max. allowed power (Hp) 200 200 200 300 300

Gearbox input speed (rpm) 1.000 (540 optional)

Nr. of rotors 1

Nr. of chains 4


Skids Regulables en altura (3 positions) con sistema Widest



fix model weight (kg) 840 930 1.064 1.106 1.152

Shifting model weight (kg) 1.080 1.115 1.150 1.224 1.396

Hydraulic cylinder stroke (mm) 400 500 500 500 500

Working reachmechanical (mm) 670-830 720-880 770-930 820-980 920-1.080

hydraulic (mm) 950-950 1.050-1.050 1.100-1.100 1.150-1.150 1.250-1.250

REF. FIX MODEL VM1C15 VM1C16 VM1C17 VM1C18 VM1C20

REF. SHIFTING MODEL VM2C15 VM2C16 VM2C17 VM2C18 VM2C20

OPTIONS

251 Rotor RV09 with pins

P01 Special body for narrow and crawler tractors

130 Gearbox with input to 540 rpm




04 Rear bent pins for guiding the brush when working backwards.

05 Three point linkage made of steel sheet with steel tube tensioners.


(shifting models).




10 Gearbox with 1.000 rpm input and 1”3/4 Z6.

D5R

0109

03

06

05

05

02

04

06

02

RV0

9O

ptio

n

04 10 RV09

RV0

7St

anda

rd

ROTARY BRUSH CUTTER

2928




MOD. D5F-180 D5F-210

TECHNICAL FEATURES






Nr. of rotors 1

Nr. of chains 4


Skidsadjustable in height

(3 positions)with Widest system



Weight (kg) 1.506 1.884

Working reach mechanical (mm) 820-980 920-1.080

REF. MOD. VM3C18 VM3C21

OPTIONS


021 Hydraulic rear hood





03 Built-in body toolbox compartment.







D5F

01

03

09

04

05

RV0

9O

ptio

n

0402 09 RV09

RV0

7St

anda

rd

ROTARY BRUSH CUTTER

3130




MOD. R3-180 R3-190 R3-200

TECHNICAL FEATURES


Total width (m) 1,92 2,02 2,12




Nr. of rotors 2

Nr. of chains 8


Skidsadjustable in height (3 positions)

with Widest system



fix model weight (kg) 912 936 1.096

Shifting model weight (kg) 982 1.110 1.188

Hydraulic cylinder stroke (mm) 500

Working reachmechanical (mm) 900-900 950-950 1.000-1.000

hydraulic (mm) 1.150-1.150 1.200-1.200 1.250-1.250

REF. FIX MODEL VM4C18 VM4C19 VM4C20

REF. SHIFTING MODEL VM5C18 VM5C19 VM5C20

OPTIONS








(shifting models).

06 2 rotors with 2 cutting height levels.



09 Gearbox with 540 rpm input and 1”3/4 Z6.

10 ZM patented system and rubber shock-absorbers between gearboxes.

R3

0105

03

02

02

04

RV0

7St

anda

rd

0302

ROTARY BRUSH CUTTER

3332




MOD. R4-205 R4-220 R4-240

TECHNICAL FEATURES


Total width (m) 2,17 2,32 2,52


Max. allowed power (Hp) 110 250 250

Gearbox input speed (rpm) 1.000 (540 optional)

Nr. of rotors 2

Nr. of chains 8



with Widest system

adjustable height control lateral skids


fix model weight (kg) 1.283 1.325 1.550

Shifting model weight (kg) 1.312 1.354 1.579

Hydraulic cylinder stroke (mm) 500

Working reachmechanical (mm) 1.025-1.025 1.100-1.100 1.200-1.200

hydraulic (mm) 1.275-1.275 1.350-1.350 1.450-1.450

REF. FIX MODEL VM6C02 VM6C22 VM6C24

REF. SHIFTING MODEL VM7C02 VM7C22 VM7C24

OPTIONS









(shifting models).





10 Rubber shock-absorbers between gearboxes.

R4

01

04

03

02

02

RV0

9O

ptio

n

0302 09 RV09

RV0

7St

anda

rd

ROTARY BRUSH CUTTER

3534




MOD. R5-240 R5-270 R5-300 R5-320

TECHNICAL FEATURES

Working width (m) 2,40 2,70 3,00 3,20

Total width (m) 2,55 2,85 3,15 3,35

Required input power (Hp) 150 180 210 250



Nr. of rotors 2

Nr. of chains 8



with Widest system



Weight (kg) 1.862 2.046 2.266 2.431

Working reach mechanical (mm) 1.200-1.200 1.350-1.350 1.500-1.500 1.600-1.600

REF. MOD. VM8C24 VM8C27 VM8C30 VM8C32

OPTIONS





01 Body with two levels and with internal reinforcements.



04 Toolbox compartment built-in body.

05 Three point linkage made of steel sheet.





10 ZM patented system and rubber shock-absorbers between gearboxes.

R5

02

01

05

03

04

02

RV0

9O

ptio

n

02 RV09

RV0

7St

anda

rd

NeWMOdel

NeWMOdel

ANNEXES

www.tmccancela.com |+34 981 695 232 TMC CANCELA FORESTRY PRICE LIST

w w w. t m c c a n c e l a . c o m40 w w w. t m c c a n c e l a . c o m

HAMMERS

TFS • •TFS2 • •TFK • •TFX • •TFZ • • • • • • •TFT • • • • • • •TFR • • • • • •TFC • •

MODEL

F01 F03 F04 F05 F11F07 F12 F13

F05

2,2 kg

F13

2,2 kgF11

2,7 kg F12

2,7 kg

F01

1,7 kg F03

1,5 kg

F04

1,5 kg F07

2,4 kg

THREE POINT LINKAGE

Cat 1 2 3 4

Tractorhorse power …50 Hp …100 Hp …225 Hp …475 Hp

a 683 825 965 1.166,5

b 44,5 52 52 65

C 39 49 52 68

d1 22 28 36,6 50,8

d2 19 25,4 31,7 45

H 460 610 685 685

d2

B

H

d1

A C

1 3/4” – Z20

CLOCKWISE

D8x32x38

COUNTERCLOCKWISE

PTO (POWER TAKE OFF)

d1mm

d2mm

d3mm

d4mm

Rmm

dIN 9611* 35,6635,40

31,9031,75

34,8734,47

31,10 7,156,65

ISO 500 34,9634,93

31,9031,75

34,8734,85

31,1030,85

7,056,55

aSae S203 34,9634,92

31,8731,75

34,8734,85

30,68 7,116,61

d1mm

d2mm

T1mm

d3mm

d4mm

T2mm

Rmm

dIN 9611* 35,6735,40

31,9031,75

34,8734,47

31,10 7,156,65

ISO 500 34,9634,93

31,9031,75

34,8734,85

29,0028,90

8,648,51

7,056,55

aSae S203 34,9534,90

29,9729,72

8,768,69

34,8734,70

27,89 8,648,51

7,116,61

T2D

3

D4

T1

D1

D2

38±0,8

Ø29

,5Ø

29,3

R

60˚

6

D3

D4

D1

D2

25.5 ±0,8

Ø29

,5Ø

29,3

5R

60˚

1 3/8” – Z6

1 3/8” – Z21

1 3/4” – Z6


TMC CANCELA FORESTRY PRICE LIST www.tmccancela.com |+34 981 695 232 TMC CANCELA FORESTRY PRICE LIST

MA

QU

INA

RIA

AG

RÍC

OLA

CA

NC

ELA

, S. L

. In

scri

ta e

n e

l Reg

istr

o M

erca

nti

l de

A C

oru

ña,

To

mo

177

4 d

el a

rch

ivo

, Sec

ció

n G

ral.,

Fo

lio 5

7, H

oja

nº.

C-1

5911

, In

scri

pci

ón

1ª

- C

. I. F

.: B

-155

4974

4

Pedra Salgueira, s/n | Anxeriz

15684 | Tordoia | A Coruña (SPAIN)

Tlf: +34 981 695 074

Fax: +34 981 695 232

[email protected]

www.tmccancela.com

ORDER FORM

DATE / / N.º

DISTRIBUTOR SIGNATURE AND STAMP (in accordance with the order) PAYMENT METHOD

COMPANY

ADDRESS

DELIVERY ADDRESS

NAME OF PURCHASER

PHONE NUMBER CELL PHONE

MACHINE REFERENCE

MACHINE DESCRIPTION

OPTIONAL 1 OPTIONAL 3


OPTIONAL 2

OPTIONAL 6

OPTIONAL 4

OPTIONAL 8

KIT KIT



OPTIONAL 2

OPTIONAL 6

OPTIONAL 4

OPTIONAL 8

KIT KIT

QUANTITY

REMARKS

DELIVERY DATE

DELIVERY DATE

MACHINE REFERENCE

MACHINE DESCRIPTION

QUANTITY

REMARKS

NOTES / COMMENTS

HOW TO PLACE AN ORDER


0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232www.tmccancela.com |+34 981 695 232

17


MOD. TFT-225 TFT-250

TECHNICAL FEATURES



Required input power (HP) 200 250

Max. allowed power (HP) 360 360



Nr. of hammersF05 (Stump) / F11 (Heavy) 40 46

F13 (Stump) / F12 (Heavy) 2 2

Counterblades 1 fi xed row + 4 replaceable rows


Nr. of belts - type 12 - XPC

SkidsBolted adjustable

(2 positions)

PTO shaft Bondioli SH type

Weight (kg) 3.178 3.295

REF. MOD. HM0X03 HM0X25

58.050 € 60.050 €OPTIONS

122 Mechanical rear pushing frame 1.295 €123 Hydraulic rear pushing frame with raker teeth 2.800 €055 Kit turbo 19.513 €057 Skids for deeper work* 1.353 €243 Rotor Heavy (hammers F11 + F12) 0 €244 Rotor Super (hammers F03 + F04) 0 €245 Rotor Multi (hammers F01 + F04) 0 €

KM1.F05.0X Maintenance basic kit (2 hammers F05 + 4 bolts + grease) 278 €KM2.F05.0X Maintenance kit (basic kit + 12 belts XPC) 1.196 €KM1.F03.0X Maintenance basic kit (2 hammers F03 + 4 bolts + grease) 214 €KM2.F03.0X Maintenance kit (basic kit + 12 belts XPC) 1.132 €KM1.F11.0X Maintenance basic kit (2 hammers F11 + 4 bolts + grease) 247 €KM2.F11.0X Maintenance kit (basic kit + 12 belts XPC) 1.167 €


MA

QU

INA

RIA

AG

RÍC

OLA

CA

NC

ELA

, S. L

. In

scri

ta e

n e

l Reg

istr

o M

erca

nti

l de

A C

oru

ña,

To

mo

177

4 d

el a

rch

ivo

, Sec

ció

n G

ral.,

Fo

lio 5

7, H

oja

nº.

C-1

5911

, In

scri

pci

ón

1ª

- C

. I. F

.: B

-155

4974

4

Pedra Salgueira, s/n | Anxeriz15684 | Tordoia | A Coruña (SPAIN)Tlf: +34 981 695 074Fax: +34 981 695 [email protected] www.tmccancela.com

ORDER FORMDATE / /

N.º

DISTRIBUTOR SIGNATURE AND STAMP (in accordance with the order)

PAYMENT METHOD

COMPANY

ADDRESS

DELIVERY ADDRESS

NAME OF PURCHASER

PHONE NUMBER

CELL PHONE

MACHINE REFERENCE

MACHINE DESCRIPTION

OPTIONAL 1

OPTIONAL 3OPTIONAL 5

OPTIONAL 7

OPTIONAL 2

OPTIONAL 6

OPTIONAL 4

OPTIONAL 8KIT

KIT

OPTIONAL 1

OPTIONAL 3OPTIONAL 5

OPTIONAL 7

OPTIONAL 2

OPTIONAL 6

OPTIONAL 4

OPTIONAL 8KIT

KIT

QUANTITY

REMARKS

DELIVERY DATE

DELIVERY DATE

MACHINE REFERENCE

MACHINE DESCRIPTION

QUANTITY

REMARKS

NOTES / COMMENTS

TFT-225

AGRÍCOLA PORRIÑOPONTEVEDRAO PORRIÑOJESÚS CAAMAÑO

608 112 457

H M 0 X 0 3 1 2 2

AGRICOLA PORRIÑO

C.I.F. B-15559634

O Porriño

Pontevedra

2

K M 1 F 0 5 0 X

8 1 2015

988 023 112

44

SPARE PARTS SERVICE


w w w. t m c c a n c e l a . c o mw w w. t m c c a n c e l a . c o m

Use always original partsQuality Assurance

46

www.tmccancela.com |+34 981 695 232 TMC CANCELA FORESTRY PRICE LIST

TERMS AND CONDITIONS

The information and photographic material contained in this document is indicative.It is not allowed to do any copies. TMC Cancela reserves the right of doing any changes, even substantial or

important ones, without notice.The usage of this price list is only reserved for the TMC Cancela authorized dealers and distributors.

TECHNICAL DATA

| The technical data in this document is only indicative. TMC CANCELA reserves the right to make any changes to the

products without notice.

EC DECLARATION OF CONFORMITY

| The TMC CANCELA equipment and machines are in accordance with the current Machinery Directive 2006/42/EC

(with application from 29/12/2009, replacing the old Directive 98/37/EC).

| Each machine is accompanied by the EC Declaration of Conformity, the Certificate of Manufacture and the User’s

Manual, being responsibility of the reseller agent the delivery to the end user.

NOTES / COMMENTS

FORESTRY Price list 15€¦ · Working width (m) 1,60 1,80 2,00 2,25 2,50 Total width (m) 2,09 2,29...

Documents

Transcript of FORESTRY Price list 15€¦ · Working width (m) 1,60 1,80 2,00 2,25 2,50 Total width (m) 2,09 2,29...