FOR YOUR CRITICAL FACILITY - interworldna.com

[email protected] . 512-257-1462 . www.itwatchdogs.com

ENVIRONMENTAL MONITORING FOR YOUR CRITICAL FACILITY

ITWatchDogs manufactures web-enabled environmental monitoring systems allowing users to keep an eye on remote conditions from a secure web interface and receive SNMP, Email, text message or voice call alert notifications when sensor measurements fall outside of specified alarm thresholds.

The web interface displays live video surveillance and environmental measurements including temperature, humidity, air flow, light, sound, power, water detection and more. Measurements are logged and graphed for viewing trends. External devices can be controlled on alarm or manually through the web interface.

MissionITWatchDogs prevents disastrous situations resulting from climate and power related issues within mission-critical environments including data center / IT, telecom, healthcare and food storage. By manufacturing

the highest quality and most reliable environmental monitors on the market, we reduce revenue loss, guard reputations, and prevent system downtime, damage and data loss. Our friendly, knowledgeable and professional engineers provide superior service and customer education, and demonstrate our commitment to quality and innovation.

HistoryITWatchDogs was founded in 2001 with a mission of providing reliable and cost-effective environmental monitoring solutions. In 2005, ITWatchDogs became a division within the GEIST Data Center Solutions Group of companies held by PCE. Today, along with engineering the technology behind its web-enabled environmental monitors, ITWatchDogs talent is also used to design power and cooling solutions for GEIST.

Quality AssuredWe are constantly striving to improve customer experience around the globe while delivering the latest features to keep ahead of the competition. Every unit is 100% tested for functionality and visual defects prior to packaging. Our superior level of quality and reliability comes with every unit we manufacture.

Firmware upgrades and technical support are made available free of charge to all users for life. Technical support is provided by the same engineers and programmers who design and maintain our products.

FocusITWatchDogs is the leading provider of environmental monitors among data center and IT environments, pharmaceutical and food storage, power plants, intelligent transportation enclosures and a variety of other mission-critical areas.

In This Catalog

Company Profile

ITWatchDogs environmental monitors help prevent:

Monitor:

Kilowatt-Hour(s)

Battery

Smoke

Voltage

Amperage Video

Power Failure

Door Position

Water Leaks

Airflow

Sound

Light

Temperature

Humidity/Dew Point

Product Overview ........................................................... Environment Monitors WatchDog 15 ...................................................................

WatchDog 100 .................................................................

MiniGoose XP II ...............................................................

WeatherGoose II & SuperGoose II ...............................................................

RelayGoose II ...................................................................

Digital Sensors ..........................................................

Analog Sensors ..................................................................

IP Network Cameras .........................................................

Accessories ...................................................................

Web Interface ....................................................................

Firmware ...........................................................................

Console Aggregator Dashboard ....................................................................

How to Purchase ITWatchDogs Products ..................................................

4

6

6

7

8

9

10-11

12

13

14-15

16

17

18-19

Back

[email protected] . 18779022979 . www.interworldna.com

Viruses, spyware and network threats get most of the attention, but environmental factors like heat, humidity, water leakage, electricity, smoke and intrusion can be equally devastating to your daily IT operations.

ITWatchDogs line of environmental monitors enable administrators to strategically monitor the data center, server room and network closet environments to protect critical infrastructure and prevent system downtime, hardware damage and data loss.

Our environmental monitors offer proactive monitoring of climate and power conditions ideal for keeping an eye on base transceiver stations, cell sites, and communication and technical rooms to ensure your equipment is running under appropriate conditions.

Environmental parameters commonly monitored include incoming AC voltage, –48VDC bus voltage and battery power with the capability of remote power on/off.

Our environmental monitors are trusted by restaurants, cafeterias, grocery stores and warehouses across the globe to ensure food quality and safety by accurately monitoring cold storage facilities.

♦ Alert notifications via SNMP traps, Email, Email-to-SMS, and voice call* when user-adjustable thresholds are breached ♦ Automation and control of external devices via relay outputs ♦ Power monitoring & switching capabilities

Variety of environmental monitors available to match your needs

ITWatchDogs environmental monitors are used for a wide range of other applications including traffic control boxes, climate-controlled storage, wine cellars, air traffic control communications closets, research laboratories, stability chambers, green-houses, livestock and poultry farms and museums.

Monitor and validate temperature among various environments within pharmaceutical plants and warehouses, hospitals, blood and tissue banks, laboratories and more. ITWatchDogs sensors are designed to monitor extreme temperatures and offer FDA 21 CFR Part 11 compliant reporting.

Environmental Monitoring For Your Critical Facility

* Auto dialer required

Data Center Telecom

Cold StorageHealth Care

44

Wea

ther

Goose II

Super

Goose II

RelayG

oose II

Wat

chDog 1

5W

atch

Dog 100

MiniG

oose II

MiniG

oose XP

II

Digital Sensors: Temperature .................................................... $28Temperature/Humidity/Dew Point (THD)......... $85Temperature/Humidity/Dew Point Kit (T3HD).. $149Temperature/Humidity/Dew Point/Airflow....... $120Remote Power Manager X2.............................. $279I/O Expander .................................................... $399CCAT Analog-to-Digital Converter ................... $60

Analog Sensors:Water Sensor .................................................. $42Door Position .................................................. $14City Power Monitor ......................................... $46-48 VDC Sensor ............................................... $9360 VDC Sensor ................................................. $70Current Transformer 30/60/120A..................... $149Smoke Alarm ................................................... $99Carbon Monoxide Alarm ................................. $65WaterSnake Kit ................................................ $399

Accessories:Blanking Panels ................................................ $9 5 Port Splitter ................................................... $10Rack Shelves ..................................................... $49PoE Splitter & Injector kit ................................. $89 In-line Power Meter ......................................... $99-48 VDC Power Supply ..................................... $99 PSTN Auto-Dialer (Analog)................................ $169GSM Auto-Dialer (SIM card required) .............. $309

IP Network Cameras:Video Consolidation • Streaming • PoEWide range of IP cameras supported

D-Link DCS-930L .............................................. $120D-Link DCD-6112 ............................................. $415D-Link DCD-6113 ............................................. $433

Console Aggregator ......................................... $499i. You may add up to 32 additional dry contact/analog (0-5VDC) ports, 8 digital sensor ports and 3 relay output ports with the rack-mountable I/O Expander.+ This feature is not currently supported, but will be implemented in a future firmware update.

WatchDogSeries

Goose Series

On-B

oard

Sen

sors

Firm

war

eEx

tern

al

Sens

ors

Hard

war

e Fe

atur

esBe

nefit

sRe

gW

eb S

erve

r

Temperature • • • • • • •

Humidity / Dew point • • • • Airflow • • Light Level • • Sound Level • • Digital Sensor Ports 2 1 1 16 5 5 4Maximum Digital Sensor Capacity 4 4 16 16 16 16 160-5 VDC Analog Sensor Ports 0 4 0i 3i 3i 3i 6i

Optional Built-in PoE ($30) • • •

Built-in Alarm Buzzer • •

Relay Outputs 0 1 0i 0i 0i 0i 3i

LCD Display w scrolling measurements • •

Rackmount 19” 1U • • • • •

Ethernet IPv6 + + HTTP / HTTPS • • • • • • •

DHCP • • • • • • •

Network Time Protocol • • • • • • •

Syslog • • • • • • •

Real Time Sensor Data Feeds Sensor Data Logging & Graphing • • • • • • •

CSV & XML Data Logs • • • • • • •

SNMP • • • • • • •

Email & Email-to-SMS Alerts • • • • • • •

Alarm Escalations • • • • • • •

Alarm Repeat & Delay • • • • • • •

Business Hours + + • • • • •

Periodic Email Status Reports + + • • • • •

Friendly Names Per Sensor • • • • • • •

Display in Metric or US Measurements • • • • • • •

Multiple Languages + + • • • • •

Access Account Levels 3 3 3 3 3 3 3Encryption via TLS/SSL • • • • • • •

Support for Custom X.509 SSL Certificates • • • • •

Configuration Cloning + + • • • • •

Event Log + + • • • • •

Interface with IP Surveillance Cameras • • • • • • •

Remote Firmware Updates • • • • • • •

Lifetime Technical Support • • • • • • •

Lifetime Firmware Upgrades • • • • • • •

30 Day Money Back Guarantee • • • • • • •

Warranty 1 Year Standard Warranty

Regulatory Compliance

$189 $279 $219 $329 $439 $539 $579

GUI, HTTP, HTTPS, SNMP, XML

10/100 10Base-T

Model Comparison

Auto-DialerPower Failure

Water Temperature / Humidity

Smoke Alarm

Door Position


5

Overview

Record sensor data over time. Turn data logging on or off for certain sensor measurements. Export sensor data logs in XML or CSV file formats.

Graph sensor data over time to view trends. Graph select sensors in relation to each other.

Receive Email alerts on alarm. Configure SMS alerts via Email-to-SMS gateway. SMS messages are shortened so that you receive one text message per alarm as opposed to multiple messages.

Support for SNMP v1, v2c, v3* with traps. ITW devices are compatible with most network management software such as What’s Up Gold, Nagios, IP Sentry, OpenView and other SNMP based software.

Specify any combination of actions or recipients per alarm. Configure multiple alarm thresholds per sensor.

Specify a 0 to 240 minute delay per alarm to get an alert only when a threshold has exceeded continuously for the set number of minutes. Alarms can repeat every 10, 30, or 60 minutes until all measurements are back to normal.

Enable or disable Email alert notifications for selected recipients during specified business hours on certain days of the week.

Schedule Emails on an hourly or weekly basis with status of the environmental monitor including all sensor data.

Configure analog inputs by assigning a scale range to the 0—5 VDC signal to view sensor data in meaningful units.

User specifies descriptive names per sensor for easy identification.

Metric & Imperial measurements. Customizable date and time format options.

English (default), Spanish, French, German and Mandarin. Switch between languages on the fly.

HTTPS using SSLv3/TLSv1. Upload Custom X.509 SSL Certificates for encrypted connections (Series II Goose only).

Administrator, Control, and View Only accounts with varying privileges.

Push and pull configuration settings from one unit to another to simplify duplicating config settings on multiple units.

Click the “[?]” to learn more about a certain aspect of the user interface.

Non-volatile records for important events. Industry standard logging protocol

Integrate your IP cameras with our user interface to have a single overview of your facility.

Firmware automatically detects a sensor when connected.

Update firmware safely and easily through the web interface.

Goose Series II

WatchDog Series

At ITWatchDogs we strive to continually improve our product and feature set by listening to our customers and keeping up with the latest trends. Listed here are some of the major firmware features ITWatchDogs environmental monitors offer.

Logging

Graphing

Email & SMS Alerts

SNMP

Alarms Escalations

Alarm Repeat & Delay

Business Hours

Periodic Status Reports

Analog Inputs

Names per Sensor International Support

Supported Languages

Security

Access Account Levels

Configuration Cloning

Contextual Help System

Event Log

Interface with IP Surveillance Cameras

Plug and Play Sensors

Remote Firmware Updates

Up to 200

Up to 50

* WatchDog series firmware to include support for SNMP v3 in a future firmware update

+ To be implemented in a future firmware update

About Our Firmware

+

+

+

+

+

WatchDog 100 The WatchDog 100 combines climate monitoring with remote relay control. The relay outputs can be tied to alarm settings or triggered manually. The unit comes equipped with on-board temperature, humidity sensor and optional built-in Power over Ethernet (PoE).

The WatchDog 100 is a compact solution perfect for tight installments. It is shipped with rack-mount brackets offering flexible wire management options.

WatchDog 15 The WatchDog 15 is a self-contained environment monitor with an on-board temperature and humidity sensor. Equipped with two digital sensor ports, the WatchDog can support up to four external sensors using a splitter.

The WatchDog 15 is the most cost-effective and reliable solution in the market for monitoring temperature, humidity and other environmental parameters in critical environments.

WatchDog 100 Specifications

WatchDog 15 Specifications

Ethernet Connection6 VDC Power SupplyOptional Power over Ethernet (PoE)Power On indicatorIdle/Activity IndicatorIP Reset Button

Ethernet Connection6-18 VDC Power SupplyOptional Power over Ethernet (PoE)Power On indicatorIdle/Activity IndicatorIP Reset Button

On-board SensorsTemperature range: -22°F to 185°F (-30°C to 85°C), +/- .5°CHumidity: 0 to 100%, +/- 2% Dewpoint: Calculated

On-board SensorsOperating temperature range: -20°C to 85°C Humidity: 0 to 100%, +/- 2% Dewpoint: Calculated

FCC Part 15 Class A ConformanceChassis Dimensions: 1.6” X 8.5” X 2.5” (HxWxD)

FCC Part 15 Class A ConformanceChassis Dimensions: 5.22” X 1.72” X 1.29” (HxWxD)

1 Digital Sensor port (connect up to 4 using splitters)4 Analog Sensor ports1 Output Relay:Max Switching Capacity:DC: 60 V, 30 W / AC: 30 V

rms, 1 A

2 Digital Sensor port (connect up to 4 using splitters)

Temperature

Auto-DialerPower -48 VDCWaterSnakeWatchDog 100-PAdd built-in Power over Ethernet (PoE)

WatchDog 15-PAdd built-in Power over Ethernet (PoE)

$30

$30

6

$279

$189

Temperature, Humidity/ Dew point, Airflow

PowerConsumption


Typical Relay Output

NormallyClosed

Relay State

NormallyOpen

CommonEnergized

Relay OutputsRelay outputs allow users to automate low-voltage devices such as external auto-dialers, sirens and warning lights in response to a sensor exceeding its user-adjustable thresholds.

The relays can be controlled directly by the user from the user interface, allowing you to turn a device on or off remotely.

Max Switching Capacity:DC: 60 V, 30 W / AC: 30 Vrms, 1 A

De-Energized

Environmental M

onitors

7

On-B

oard

Sen

sors

Exte

rnal

Se

nsor

sHa

rdw

are

Feat

ures

Reg

Web

Ser

ver

Model Comparison

WatchDogSeriesWatchDog 15

WatchDog 100

MiniGoose II

Goose Series

10/100 10Base-T

$189 $279 $219

i. You may add up to 32 additional dry contact/analog (0-5VDC) ports, 8 digital sensor ports and 3 relay output ports with the rack-mountable I/O Expander.

+ This feature is not currently supported, but will be implemented in a future firmware update.

MiniGoose II Specifications

IP Cameras 6 VDCOn-board

Temperature Sensor

Analog to Digital Converter

Temperature, Humidity/ Dew point, Airflow Temperature

PowerDoor Position Water

$219

Temperature • • • Humidity / Dew point • • Airflow Light Level Sound Level Digital Sensor Ports 2 1 1Maximum Digital Sensor Capacity 4 4 160-5 VDC Analog Sensor Ports 0 4 0i

Optional Built-in PoE ($30) • • Built-in Alarm Buzzer Relay Outputs 0 1 0i

LCD Display w scrolling measurements Rackmount 19” 1U • Ethernet IPv6 + + HTTP / HTTPS • • • DHCP • • • Network Time Protocol • • • Syslog • • • Regulatory Compliance

Ethernet Connection6 VDC Power Supply IP Reset Button

On-board SensorsOperating temperature range: -10°C to 60°C (15°F to 140°F), +/- 0.5°C

Chassis Dimensions: 1.5”X5.25”X1.5” (HxWxD)FCC Part 15 Class A Conformance

One Digital sensor port (capacity of 16 with splitters)

MiniGoose II Need a lot of remote climate sensors? Short on cabinet space? This small monitor is well suited for strategic temperature monitoring in tight locations, plus monitoring up to 16 additional external sensors using splitters. Provides web-based remote surveillance of temperature and connected sensors. It supports 16 additional sensors using splitters. Analog sensors may be connected using a Remote Analog to Digital Converter.

SuperGoose - LCD Display

8

$439

$329

$539


Ethernet ConnectionPower On indicatorIdle / Activity indicator 6 VDC Power SupplyIP Reset Button

5 Digital sensor ports (capacity of 16 with splitters)3 Analog sensor portsLCD Display (SuperGoose II)Audible Alarm (SuperGoose II)

On-board SensorsOperating temperature range: -10°C to 60°C (15°F to 140°F), +/- 0.5°CHumidity: 0-100%, +/- 5% Dewpoint: CalculatedAirflow, Sound & Light: 0-99, relative

Chassis Dimensions: 1.61”X17”X1.61” (HxWxD)FCC Part 15 Class A Conformance

Ethernet Connection6 VDC Power SupplyPower On indicatorIdle/Activity IndicatorIP Reset Button

16 Digital sensor ports3 Analog sensor ports



MiniGoose XP IIWith sixteen digital sensor ports, the MiniGoose XP II is ideal for applications that require a low-cost climate monitor and a large number of remote sensors. The MiniGoose XP II is ideal for connecting up to 16 Digital and 3 Analog sensors in a convenient 1U device.

Satisfy ASHRAE standards by monitoring top, middle and bottom cabinet inlet temperatures on up to 5 cabinets with a single monitoring device. The addition of Analog sensors allow additional parameter monitoring of water, smoke, power failure or room entry.

SuperGoose II

The WeatherGoose II & SuperGoose II are ideal for monitoring cabinets and racks. Both contain 5 on-board environmental sensors and additional sensor ports for connecting external digital and analog sensors.

IP Reset Light Sensor

On-board Temp, Humidity/Dew point,

Airflow sensors

LCD Display

Audible AlarmSee WeatherGoose II

Goose II Specifications

WeatherGoose II

MiniGoose XP II Specifications

Temperature Door Position Water Power

WaterSnake Smoke AlarmRPM X2Temperature

Temperature, Humidity/ Dew point, Airflow

RelayGoose II-PAdd built-in Power over Ethernet (PoE)

$30

9

$579

On-B

oard

Sen

sors

Exte

rnal

Se

nsor

sHa

rdw

are

Feat

ures

Reg

10Base-T

i. You may add up to 32 additional dry contact/analog (0-5VDC) ports, 8 digital sensor ports and 3 relay output ports with the rack-mountable I/O Expander.

Environmental M

onitors

Web

Ser

ver

Tech Support - All technical support is handled by the same programmers and engineers that develop and maintain our products – NOT a scripted call center. Rest assured of receiving proper technical support when you need it most. Technical support and firmware upgrades

are available for life at no additional charge.

MiniGoose XP II

SuperGoose II

WeatherGoose II

$329 $439 $539 $579 Temperature • • • •

Humidity / Dew point • • Airflow • • Light Level • • Sound Level • • Digital Sensor Ports 16 5 5 4Maximum Digital Sensor Capacity 16 16 16 160-5 VDC Analog Sensor Ports 3i 3i 3i 6i

Optional Built-in PoE ($30) •

Built-in Alarm Buzzer • •

Relay Outputs 0i 0i 0i 3i

LCD Display w scrolling measurements • •

Rackmount 19” 1U • • • •

EthernetIPv6 HTTP / HTTPS • • • •

DHCP • • • •

Network Time Protocol • • • •

Syslog • • • •

Regulatory Compliance

RelayGoose II The RelayGoose II offers climate monitoring with three relay outputs. It comes equipped with an on-board temperature sensor and 6 analog inputs. It supports up to 16 remote digital sensors.

The relay outputs can be triggered on alarm or manually over the web interface.

Ethernet ConnectionPower On indicatorIdle / Activity indicator 6 VDC Power SupplyIP Reset Button

4 Digital sensor ports (capacity of 16 with splitters)6 Analog sensor ports 3 Relay outputs:Max Switching Capacity:DC: 60 V, 30 W / AC: 30 V

rms, 1 AAudible AlarmLCD Display



RelayGoose II Specifications

RPMX2 City Power Monitor

60VDC SensorYour Warning

Light Contactor

Auto-Dialer

Goose SeriesRelayGoose II

Model Comparison

10

$149

$85THD Sensor

T3HD Sensor


Note, the entire kit counts as a single digital sensor to the host device. The T3HD may be daisy chained from one rack to the next to achieve in-row temperature monitoring for top, middle and bottom of each rack as per ASHRAE guidelines.

Temperature Sensor

Temperature, Humidity, Dew Point, Airflow Combo SensorThe temperature, humidity, dew point, airflow combination sensor allows you to be sure that equipment is not overheating and helps prevent damage by condensation or static electricity using relative humidity and dew point readings.

12’ $120

20’ $125

50’ $130

100’ $140

12’ $28

20’ $30

50’ $42

100’ $50

Price by length

Price by lengthThese easy-to-install, remote temperature sensors are great for monitoring a variety of areas.

Most commonly used in:A/C inlet (return air)A/C Outlet (vent)Ambient room temperatureHot spotsInternal cabinet temperatureRefrigeration unitsOutdoors (sensor needs to be kept dry)

$28-$50

$120-$140

The Temperature, Humidity, Dew Point Sensor (THD) provides real-time measurements to the host device for data logging and alarming. The sensor comes equipped with two 6P6C modular jacks (aka RJ12), one for output to the host device and one supplementary input for daisy-chaining an additional digital sensor. A 6P6C modular patch cable for connection from sensor to host device is included. You may mount the sensor nearly anywhere using screws or adhesive.

The T3HD is an enhanced version of the Temperature, Humidity, Dew Point Sensor (THD) with four 6P6C modular jacks (aka RJ12), one for output to host device, a supplementary input for daisy-chaining and two additional inputs strictly compatible with temperature sensors. The unit comes kitted with 3 FT and 6FT temperature sensors and is especially ideal for monitoring top, middle and bottom of a server rack.

Sensors/Peripherals$60-$75

$229

Leader cable

J-clipsWater

sensingcable

C 1 2 3 C

Analog Inputs on Goose

White (-)

Green (+)

Red (+)

Black (-)

Fault Alarm

Water Detect

5VDC Power Supply

Wall Mounted Components

Top View ofServer Room Floor

WaterSnakeInterface Box

11

Remote Power Manager X2The ITWatchDogs Remote Power Manager X2 is an add-on accessory that provides remote power monitoring and switching capabilities. Get real time logging and graphing of voltage, amperage, real power, apparent power, power factor and kilowatt hours. Remotely reboot locked systems or control system power.

12’ $60

20’ $69

25’ $75

Price by length


Measurements:VoltsAmpsReal PowerApparent PowerPower FactorKilowatt Hours

Features:Auto Discovery – Quick & simple installationLCD Display for local current monitoringKilowatt-hour meter (non-resettable)Threshold alarms via Goose unitOne digital sensor input

Part # RPM15-515R

RPM15-C13

RPM20-515R

RPM20-C13

RPM20-C19

Price $229 $229 $229 $229 $229

Amps 15 15 20 20 20

Volts 120 120 or 208 120 120 or 208 120 or 208

Receptacle Type / QTY 5-15R/2 C-13/2 5-15R/2 C-13/2 C-19/2

IEC or NEMA Power Plug 5-15P C-14 5-20P C-20 C-20

Twist-Lock Plug Optional N/A Optional N/A N/A

Remote Power-SwitchingPanel Mounting Bracket10’ Power Cord

Per Outlet Rating: 12 Amps

UL and c-UL Listed per UL 60950FCC Part 15 Class A regulation

The remote interface converts analog sensor into a digital sensor that can be connected to a digital sensor port. Useful for units that don’t have an Analog Input port (like the MiniGoose II) or for adding additional analog sensors to any unit. The interface comes programmed for the type of analog sensor that will be connected to it. Types: Smoke, City Power, -48VDC, Current, Door Contact, Water, Water Snake

WaterSnakeThe advent of liquid cooling in datacenters increases the need to detect water leaks early, before equipment is damaged computer room environment. Water Sensing Cable Kits feature detection cables which sense the presence of water along the entire cable length. These kits are ideal for detecting moisture over a wide area such as the perimeter of a group of racks and cabinets. When connected to any monitor with Analog Input ports, you can be alerted to potential dangers via email, SMS or SNMP traps.

Connector: 4 pin, 0.96” diameter

Diameter of cable: not more than 0.25”

Weight: .02 lbs/ft

Plenum Rating: CL2P/CMP C(UL)

Specifications

Operating Environment

Temperature: 32°F to 167°F

Humidity: 5% to 95% RH, non-condensing

$399-$2,179

10’ $399

40’ $555

120’ $1099

300’ $2179

Price by length

$70-$93

$130

$99

-48 VDC & +60 VDC Sensor

Current Transformer

Smoke Alarm

Measure battery voltage. Continuously track the voltage of telephone batteries or cell phone system power with -48 VDC or 60 VDC. Designed for telephony battery voltage monitoring and other applications requiring monitoring of a DC voltage.

Measure amperage. Monitor how much current is being drawn by a particular device or group of devices. Measures current ranges of 30, 60, 120 amps, determined by a 3-position switch. Outputs 0 to 5 VDC (proportional to current)

Detect smoke. Provides real-time recognition of smoke. The kit contains a standard smoke alarm plus all the wiring to connect to an Analog Input. The detector comes equipped with its own audible alarm. Plugs into a standard US-style wall outlet. US power (120 VAC) only.

+60 VDC $70

-48 VDC $93

Price by voltage

C 1

2 3

C

The Current Transformer (CT) clamps around a single current-carrying wire, while the output of the CT connects to an Analog Input port.

12 [email protected] . 18779022979 . www.interworldna.com

Door Position $14-$19Detect when a door or cabinet is open or closed. Door position sensor has four components: magnet, switch with screw-terminal, cover and connection wires. The wired switch is mounted to the door frame (or cabinet) and the magnet on the door, opposite the switch. When door opens, the switch separates and sensor trips an alarm.

$42-$65Water Sensor

Detect water leakage. Sensor measures conductivity and indicates whether the sensor is dry, damp, or completely immersed in water.

Most commonly placed nearby:Plumbing fixturesA/C drip pansPipesWater sprinklers

15’ $42

100’ $65

Price by length

30’ $14

50’ $16

100’ $19

Price by length

$46-$50City Power MonitorDetect power outages . This power sensor provides real-time notification of a power outage. Commonly used to monitor main power, UPS and 3-phase. Connects to an Analog Input port and comes complete with its own power adapter that plugs directly into the power source being monitored. Status LEDs indicate system state. Cord length is 100 FT. Input voltage range 100 to 240 VAC.

Universal: includes interchangeable plugs for US, UK, Austrailia & Central Europe.

US British Universal

$46 $48 $50

Price by plug type

DCS-3411 IP Camera

Sensors and Security Cameras

$199

$399

DLink DCS 930L

13

DLink DCS 6112

The D-Link® DCS-930L Network Camera connects to a wireless (or wired) network to provide high quality video surveillance. With its sleek compact design, the DCS-930L is an affordable network camera ideal for yourcritical facility.

Built-in Network Interface

- 10/100Base-TX Fast Ethernet

- 802.11b/g/n WLAN

Wireless Connectivity

- 802.11b/g/n Wireless with WEP/WPA/WPA2 security

The DLink DCS 6112 is an indoor HD dome camera featuring 2 megapixel resolution and H.264 compression that enables high quality video footage to be recorded. The DCS-6112 features a 3-axis gimbal that allows for flexible installation and lens positioning and it also has a built-in microSD card slot which can be used for local backup by storing important events on a retrievable microSD card.

I/O Expander (IOE)

Specifications

$399

Back

8 Digital sensor ports 32 Analog sensor ports 3 Relay outputs:Max Switching Capacity:DC: 60 V, 30 W / AC: 30 V

rms, 1 A

Uses a digital sensor port on monitor. Counts as one sensor towards digital sensor limit of 16. For use with Series II units only.

Temperature Auto-Dialer

Uplink Port (connects to monitor)Power On indicatorIdle / Activity indicator 6VDC Power Supply

Temperature, Humidity/ Dew point, AirflowRPM X2

PowerDoor Position Water-48 VDCWaterSnake Smoke Alarm Current Transformer


The Input/Output Expander (IOE) is designed to provide 32 additional Analog Input ports and three relay output ports to your climate monitor. It connects to a digital port and allows you to store friendly names for each sensor.

Climate Monitor

PoE AdapterSplitter

PoE Injector120 VAC Power

Non-PoEInternet/Network

Power

EthernetPoE

Cat-5 300’

14 [email protected] . 18779022979 . www.interworldna.com

5 Port Splitter $10

$99-48 Volt DC Power Supply

-48VDC Power Supply allows you to use a -48 VDC power source to power any ITWatchDogs environmental monitor.

Input36 VDC to 60 VDC (max)Positive or Negative GroundRing Terminal Connectors

Output6 VDC1 Amp (max)Barrel Connector (fits monitor)

Increase the number of available sensor ports with the 5 port splitter. Chain the splitters together to connect up to 16 sensors. One RJ-11 plug, five receptacles, 5 foot cord.

$37-$89Power over Ethernet (PoE)

Power any environmental monitor and/or web camera over Ethernet cable using the PoE Splitter & Injector Kit. Only a standard CAT5 cable (max 300’) is required to carry both data and power to each device. The injector takes data from an Ethernet hub and power from a wall outlet and outputs both data and power through the CAT5 cable. The splitter is placed at the end of the CAT5 cable, returning data and power to their respective cables. This unit is a standalone device and does not interface to an environment monitor.

$99-$109In-Line Power MeterIn-line power meter for measuring amps, volts, watts and power factor from power source (wall plug or PDU). Values continually scroll on display. Available with IEC connectors (C13 & C14) or NEMA (5-15).

15 Amps load capacity 80 to 240 VAC, 50-60 Hz, single phase Passive operation (fail-safe)

IEC $99

NEMA $109

Price by plug type

PoE Adapter Splitter $37

PoE Injector $54

PoE Splitter & Injector Kit $89

$169-$309Analog PTSN Auto-Dialer KitAPD-T01 ($169)

The PTSN auto-dialer connects to a relay port and a standard phone line.

GSM Auto-Dialer KitAPD-G05 ($309)The APD-G05 GSM requires a SIM card.

Kit includes:1 x PSTN slave unit

1 x US 12V adaptor

1 x 5m (16 ft) alarm cable

1 x US telephone cable

1 x British telephone cable

1 x fixing kit for drywall

GSM Auto-Dialer Kit includes:1 x GSM slave unit

1 x US 12V adaptor

1 x 5m alarm cable

1 x fixing kit for drywall

1 x Installation Manual (universal for ITW/Gmfg)

1 x 7.2V NiMH battery pack

Blanking Panels

Rack Shelves

Accessories

Relay Controlled Auto-Dialer

While our environmental monitors provide IT administrators and facilities managers with a powerful combination of Email and SNMP-based alerts – what happens if your network connections go down and the messages can’t be sent? Models equipped with dry-contact relays, such as the RelayGoose II and WatchDog 100, can even trigger alarm lights or sirens via the relay outputs – but what if there’s no one around to hear or see them?

The auto-dialer provides an added level of alarm notification. When combined with an ITWatchDogs monitoring unit equipped with relay outputs, the dialer can be programmed to call up to nine different phone numbers and play a pre-recorded message to each person who answers, until one of them acknowledges the message by pressing the * or # key on their phone. The unit can even be programmed to play one of two different messages, depending on which trigger input is activated, and to only call certain numbers for one trigger vs. another. The dialer comes equipped with a built-in audible alarm and are able to dial out even while running on battery power.

1UBP $9

1UBPSKO $17

2UBP $11

3UBP $14

5UBP $19

2URS $49

3UCMRS $79

4UWR $149

A

3UCMRS

2URS

1UBPSKO

1UBP

2UBP

3UBP

5UBP

4UWR

DETAIL A

PANELS OVERLAPFOR IMPROVED SEAL

Blanking Panels & Shelves

15

Auto-dialer is compatible with any unit supporting at least one relay port.

16

Climate Monitor

Live Sensor Readings

Logging & Graphing

Integrates with IP Webcams

Web Interface Overview

C

B

E

F

G

A

CF

G

A D

B E

D International Support

Friendly Names Per Sensor

Analog Input Customization

Supported Language Selection

Live Sensor Values & Logging

Graphs Showing Data Trends

Interface with IP Surveillance Cameras


17

J

HK

M

O

I

L

N

Alarms with Escalations

Alarm Repeat & Delay Options

Alerts via Email, Email-to-SMS, & SNMP. Activation of Relay port(s) or power outlet(s) to control external processes.

K Event Log Messages

Syslog ConfigurationL

O Relay ControlsM Alarm Valid Hours

Periodic Status ReportsN

I

J

H

Web Interface

Console Aggregator Dashboard

ITWatchDogs Console Aggregator offers the convenience of managing a multi-unit deployment from a single web-interface.

The software runs as a Windows Service providing a central location for logging and graphing real-time sensor data and managing device configurations and alert notifications, all through a single IP address.

Network cameras interfaced on any ITW device are visible on the dashboard. A security camera tab con-solidates video image from all cameras, providing a visual summary of remote conditions. Video images are logged every minute, allowing users to review historic events.

Sensor data are stored in a SQL database on a monthly basis limited only by disk space. Data and event log can be accessed by any SQL management tools and can be exported in CSV format. Camera images are kept for one month and can be reviewed from the Console Aggregator web-interface.

Users can selectively upgrade firmware to multiple units at a time, from a click of a button.

Console Aggregator supports up to 100 environmental monitors. Access to the user interface is through any standard web browser – client software is not required.

18

Graph sensor readings across devices with overlapped line-graph view

Compare sensor readings across devices with a stacked-bar view

Security Cam view displays thumbnail array of all web-cams.

Color-coded bars indicate when devices are currently in an alarm state.

*(Console Lite - Free) Aggregates up to two units.

$499*


CRITICALMONITOR YOUR FACILITY

Door Position

Temperature

Airflow

Humidity/Dew Point

Smoke

Light

Power Failure

Video

without being there

Water Leaks

Contact Us

ITWatchDogs7600 N Capital of Texas HwySuite B-345Austin, TX 78731

Tell:18779022979Fax:18773294324saleswww.itwatchdogs.comwww.youtube.com/itwatchdogswww.twitter.comwww.facebook.com

Firmware Upgrades

At ITWatchDogs, we stand behind our products. Firmware updates are available free at itwatchdogs.com.

We value the on-going relationship with our customers and place great emphasis on designing the highest quality environmental monitors and diligently tracking the performance record of our offerings.

Customer feedback is extremely important and we listen very carefully to requests and recommendations on how to further enhance our products. Please Email your comments and recommendations to [email protected].

Technical Support

ITWatchDogs prides itself in providing top notch customer service and technical support to our customers. Technical support is available free of charge for life to all our users. Simply submit a support ticket online, call us, or Email [email protected]

Technical support is handled by the same engineers and developers who design and maintain our products, so questions and problems are resolved quickly and authoritatively.

www.itwatchdogs.com or through your preferred distributor or reseller.

ITWatchDogs environment monitors help prevent Equipment Failure, Downtime, Loss of Revenue, Loss of Reputation

Find us on

010513

ITWatchDogs environmental monitors help prevent:

Monitor:

Kilowatt-Hour(s)

Battery

Smoke

Voltage

Amperage Video

Power Failure

Door Position

Water Leaks

Airflow

Sound

Light

Temperature

Humidity/Dew Point

FOR YOUR CRITICAL FACILITY - interworldna.com

Documents

Transcript of FOR YOUR CRITICAL FACILITY - interworldna.com