for Main Auxiliary Engines, and 2stroe meeting OEM reuirementsklassenhydraulics.com/Marine Lube Oil...
2
Marine Lube Oil Purifier CJC™ Product Sheet PSST1115-UK 26.09.2014 for Main & Auxiliary Engines, 4- and 2-stroke - meeting OEM requirements Page 1/2 APPLICATION The CJC™ Marine Lube Oil Purifier provides owners, operators and crews with a simple, cost effective and efficient method for maintaining LO quality, meeting OEM lube oil cleanliness require- ments. BENEFITS The CJC™ Marine Lube Oil Purifier is a reputed solution for maintain- ing LO quality. The purifier is installed off-line, similar to for example a centrifuge, except all aspects of installing, operating and main- taining are much more simple. The CJC™ Marine Lube Oil Purifier can be installed on both 4- and 2 stroke engines. Our credibility and heritage goes back more than 6 decades, but the principle of opera- tion remains the same, except the fitted pump now provides clean oil 24/7/365. Furthermore, with the new line-up and selection of in- serts we can deal with higher flows, better cleanliness, with lower consumption of filter inserts and can therefore be fitted on bigger engines than before. The CJC™ Marine Lube Oil Purifier provides for a filtration rating of 3/0,8 micron, regardless of density. Furthermore, the purifier ab- sorbs any condensated water and removes varnish. Our research is focused on the performance of the inserts, and this has enabled filter units capable of matching the turnover requirement from the engine manufacturers. By installing CJC™ Marine Lube Oil Purifier the sludge production is eliminated and in most cases, so is heating. If heating of the sump is desirable, this is catered for by a separate heating unit. On our new compact units with screw type pump and frequency control, the pump can be detached and placed at a suitable location at a lower deck. The control box is designed for bulkhead mounting, but can be mounted on the purifier itself. The same simple principle as always,but with an integrated flexibility to suit your requirements for engine room design. WHY y No sludge y Reduced LO consumption y Easy installation y Easy operation y Easy maintenance y Smart design PAYOFF Whether for retrofit or newbuilding, the CJC™ Marine Lube Oil Purifier will have earned itself within the first year of operation, compared to other means of cleaning the lube oil. If installed on newbuildings, the savings on related installation costs compared to other means of cleaning the lube oil is substan- tial. The CJC™ Marine Lube Oil Purifier is uncomplicated to main- tain, so vessel crew will not only benefit from operating the unit without much maintenance, also the vessel owner will experience reduced operational costs for maintaining lube oil clean and dry. HOW The CJC™ Marine Lube Oil Purifier can deliver 500-3000 l/h of clean, dry lube oil, enabling operation on very large engines. With a filtration rating of 3/0,8 micron and removal of water and varnish/ soot, the CJC™ Filter Inserts reduce the wear on engine parts. The simple design means easy maintenance and uncomplicated opera- tion without sludge production. Being, in principle, an off-line solu- tion, the quality of lube oil is unparalleled. y Proven track record y Small footprint y Density independent y High dirt capacity y Reduced wear on parts y Lower emissions OPTIONS Preheater, separate pump skid, control cabinet mounted on filter, drain tank. The CJC™ Marine Lube Oil Purifier is available in multiple sizes for the individual purpose with 1-3 filter stays and 2-12 filter inserts. The CJC ™ Marine Lube Oil Purifier 27/54, 3 stay version Dim. CJC™ Marine Lube Oil Purifier From To Pump flow/hour (std.) ltr/gal 500/132 3000/793 Inverter operation Down to approx. 20% of std. flow Power consumption, ave. kW 0.18-0.90 Pump type screw spindle Pump inlet pressure, max bar/psi 2.0 / 29 Pressure control pressure switch & internal by-pass in pump Pressure drop, max bar/psi 1.8 / 26 Design pressure, filter bar/psi 4 / 58 Filter Inserts, 27/27 pcs. 2-6 Weight, net kg/lb 121/267 193/426 Weight, operating, wet & w/o control box kg/lb 155/342 305/672 Weight, control box kg/lb 30/66 Temp. oil, max *) ºC/ºF 60/140 Temp. ambient, max ºC/ºF 45/113 CAPABILITIES Dirt holding capacity approx. ltr/gal 9/2.4 54/14.4
Transcript of for Main Auxiliary Engines, and 2stroe meeting OEM reuirementsklassenhydraulics.com/Marine Lube Oil...
Marine Lube Oil Purifier
CJC™ Product Sheet
PSST1115-UK26.09.2014
for Main & Auxiliary Engines, 4- and 2-stroke - meeting OEM requirements
Page 1/2
APPLICATIONThe CJC™ Marine Lube Oil Purifier provides owners, operators and crews with a simple, cost effective and efficient method for maintaining LO quality, meeting OEM lube oil cleanliness require-ments.
BENEFITSThe CJC™ Marine Lube Oil Purifier is a reputed solution for maintain-ing LO quality. The purifier is installed off-line, similar to for example a centrifuge, except all aspects of installing, operating and main-taining are much more simple. The CJC™ Marine Lube Oil Purifier can be installed on both 4- and 2 stroke engines. Our credibility and heritage goes back more than 6 decades, but the principle of opera-tion remains the same, except the fitted pump now provides clean oil 24/7/365. Furthermore, with the new line-up and selection of in-serts we can deal with higher flows, better cleanliness, with lower consumption of filter inserts and can therefore be fitted on bigger engines than before.The CJC™ Marine Lube Oil Purifier provides for a filtration rating of 3/0,8 micron, regardless of density. Furthermore, the purifier ab-sorbs any condensated water and removes varnish.Our research is focused on the performance of the inserts, and this has enabled filter units capable of matching the turnover requirement from the engine manufacturers. By installing CJC™ Marine Lube Oil Purifier the sludge production is eliminated and in most cases, so is heating. If heating of the sump is desirable, this is catered for by a separate heating unit. On our new compact units with screw type pump and frequency control, the pump can be detached and placed at a suitable location at a lower deck. The control box is designed for bulkhead mounting, but can be mounted on the purifier itself. The same simple principle as always,but with an integrated flexibility to suit your requirements for engine room design.
WHY y No sludge y Reduced LO consumption y Easy installation y Easy operation y Easy maintenance y Smart design
PAYOFFWhether for retrofit or newbuilding, the CJC™ Marine Lube Oil Purifier will have earned itself within the first year of operation, compared to other means of cleaning the lube oil.If installed on newbuildings, the savings on related installation costs compared to other means of cleaning the lube oil is substan-tial. The CJC™ Marine Lube Oil Purifier is uncomplicated to main-tain, so vessel crew will not only benefit from operating the unit without much maintenance, also the vessel owner will experience reduced operational costs for maintaining lube oil clean and dry.
HOWThe CJC™ Marine Lube Oil Purifier can deliver 500-3000 l/h of clean, dry lube oil, enabling operation on very large engines. With a filtration rating of 3/0,8 micron and removal of water and varnish/soot, the CJC™ Filter Inserts reduce the wear on engine parts. The simple design means easy maintenance and uncomplicated opera-tion without sludge production. Being, in principle, an off-line solu-tion, the quality of lube oil is unparalleled.
y Proven track record y Small footprint y Density independent y High dirt capacity y Reduced wear on parts y Lower emissions
OPTIONSPreheater, separate pump skid, control cabinet mounted on filter, drain tank.The CJC™ Marine Lube Oil Purifier is available in multiple sizes for the individual purpose with 1-3 filter stays and 2-12 filter inserts.
The CJC ™ Marine Lube Oil Purifier27/54, 3 stay version
Dim.CJC™ Marine Lube Oil Purifier
From To
Pump flow/hour (std.) ltr/gal 500/132 3000/793
Inverter operation Down to approx. 20% of std. flow
Power consumption, ave. kW 0.18-0.90
Pump type screw spindle
Pump inlet pressure, max bar/psi 2.0 / 29
Pressure control pressure switch & internal by-pass in pump
Pressure drop, max bar/psi 1.8 / 26
Design pressure, filter bar/psi 4 / 58
Filter Inserts, 27/27 pcs. 2-6
Weight, net kg/lb 121/267 193/426
Weight, operating, wet & w/o control box kg/lb 155/342 305/672
Weight, control box kg/lb 30/66
Temp. oil, max *) ºC/ºF 60/140
Temp. ambient, max ºC/ºF 45/113
CAPABILITIES
Dirt holding capacityapprox.
ltr/gal 9/2.4 54/14.4
Marine Lube Oil Purifier
CJC™ Product Sheet
PSST1115-UK26.09.2014
for Main & Auxiliary Engines, 4- and 2-stroke - meeting OEM requirements
C.C.JENSEN A/SLøvholmen 13 y DK-5700 Svendborg y DenmarkPhone: +45 6321 2014 y Fax: +45 6222 4615
[email protected] y www.cjc.dkPage 2/2
2,050
37,8960
0
8,0 ±0,8202 ±20
a ±0,8a ±20
b Free height
Ø[0,7]4xØ18
D
E G
0,8 ±0,220 ±5
41,71060
39
,410
00
0
10,5 ±0,8267 ±20
18,8 ±0,8478 ±20
36,9 ±0,8938 ±20
A
B
C
F
F
3,075
33,5850
7,
8 ±0
,819
8 ±2
0
11
,8 ±0
,829
9 ±2
0
Design pressure 4 bar/60 psiDesign temp. 60 C/140 F
A = DN25, oil inletB = DN25, oil outletC = Drain valveD = 1/4" BSP AutoventE = Sampling pointF = Pressure transmitterG = Leak detection
Weight:Filter (X) kg/ lbsControl box (Q) kg/ lbsDrip pan & misc. kg/ lbsTotal kg/ lbs
Measurements in mm and [inches]P&I Diagram No. 7000520
FA9601322-XYZQ
Customer:
F
E
3
D
4
C
2
B
1
A
DateAppr.Rev.
Weight:
Ref:
Tolerance:EN ISO13920-BF
07-01-2014
CJC FineFiltertype HDU 3x27/- S-DE2PZGeneral Arrangement
Project:
Date
Appr.
Constr.
Sign
LØVHOLMEN 13, DK-5700 SVENDBORG, DENMARK Fax +45 62224615 Phone +45 63212014 www.cjc.dk
C.C.JENSEN A/S
Drawing no.
This document has been prepared by C.C.JENSEN A/S of Svendborg, Denmark, and remains the property of the company.Reproduction or use of this document without the consent of C.C.JENSEN A/S or its subsidiaries is prohibited. All rights reserved.
9601322
INSTALLATION PRINCIPLE System Pump In-Line Filter
Oil System
Tank System
CJC™
Mar
ine
Lube
Oil
Purif
ier
DIMENSIONSOPERATIONAL FEATURES
y Compact design y All steel design y Skid type unit/ drip pan y Logic control Unit y LCD display y Frequency controlled pump y Back-pressure control option y Flow matches OEM requirements*) y Screw type pump y Detachable pump and bracket*) y Separate control cabinet*)
or integrated control cabinet y Separate pre-heater unit*) y Tank mounted optional*) y Fixed inlet/outlet connection y Preheater unit matches connections y Remote start/stop y Inlet/outlet pressure y Inlet/outlet shut off valves y Step file drawings y Centre of gravity data y Class approval
*) optional features, to be stated upon ordering
SAFETY FEATURES
y Alarm for leak detection y Remote stop/ESD
