for John Deere Tractors series 5000, 6000, 7000 and...
Transcript of for John Deere Tractors series 5000, 6000, 7000 and...
www.rockinger-agriculture.de
for John Deere Tractorsseries 5000, 6000, 7000 and 8000
Hitch systems
2 ROCKINGERMember of JOST-World
Ladders for 5000 series
RO✶880 A
• Standard long
• Ladder for height-adjustable hitches
• Only for John Deere 5 E series 5055, 5065, 5075
ROS(t)
D(kN) ABG EG
880 A 3004* 1 1 20880 A 3034* 2 1 201 for gear bolt 9 x 32 for gear bolt 12 x 12
RO✶880 A
• Standard long
• Ladder for height-adjustable hitches
• Only for John Deere 5M series 5070, 5080, 5100
ROS(t)
D(kN) ABG EG
880 A 2904* 2 48,5
Track width for all ladders for series 5000 is 330 mmTowing hitches for use in ladders please refer to page 8 and following
RO✶880 E
• With Piton-Fix
• Ladder for height-adjustable hitches
• For John Deere series 5080, 5090, 5100, 5620, 5820 and 5020
ROS(t)
D(kN) ABG EG
880 C 110401 2 65,7880 E 110402 2 65,71 with built in Piton-Fix2 with built in Piton-Fix and drawbar support
Equipment Order No.Fastening kit ROE 71435
RO✶880 A
• Standard long
• Ladder for height-adjustable hitches
• For John Deere series 5020, 5080, 5090, 5100, 5620 and 5820
ROS(t)
D(kN) ABG EG
880 A 1104* 2 65,7
Equipment Order No.Fastening kit ROE 71435
* Technical status
ROCKINGERMember of JOST-World 3
Ladders for 6000, 7000 und 8000 series
RO✶880 A
• Ladder for height-adjustable towing hitches
• A 08042 long standard
• A 09142 short for Pick-Up-Hitch
ROS(t)
D(kN) ABG EG
880 A 0804* 2 / 3 1 89,3880 A 0914* 2 89,31 below PTO
RO✶880 C
• Ladder for height-adjustable hitches
• With built-in Piton-Fix
• Type 70397 version
ROS(t)
D(kN) ABG EG
880 C 0114* 2 89,3883 C 0114* 1 2 89,3880 E 01140* 2 2 89,3for Piton-Fix
3 89,31 with drawbar support Swiss version2 with drawbar support for original John Deere swinging drawbars
Track width for all ladders for series 6000, 7000 and 8000 is 330 mmTowing hitches for use in ladders please refer tp page 8 and following
* Technical status
RO✶880 K
• Ladder for height-adjustable hitches
• With built-in ball hitch
ROS(t)
D(kN) ABG EG
880 K 0114* 2 89,3for ball hitch
4 93,6
Equipment Order No.Forced steering (right) ROE 74 L 018Forced steering (left) ROE 74 L 019Forced steering (both sides) ROE 74 L 023Fastening kit ROE 71352
4 ROCKINGERMember of JOST-World
Kupplungskugeln und Piton-Fix zum Einsatz in Anhängeböcke
Zuglaschen und Zubehör
ROi825A3034C KS 80 zum Abstecken imAnhängebockRO Spurweite S D ABG EG
(mm) (t) (kN) M e1
825A3034C 330 3 89,3 1025 0492
Anbausatz Zwangslenkung 74L026
ROi825B50001mit höhenverstellbarem KupplungsträgerROE Spurweite S D ABG EG
(mm) (t) (kN) M e1
74L04440 330 3 89,3 9887 040074L106 390 3 98,1 9887 0400
Aufrüstsatz Zwangslenkung lieferbar
Anbausatz Zwangslenkung 74L026
Für John Deere 6000 – 7030ROi820L0304C Zuglasche mit Piton-Fix ROi825L0304C Zuglasche mit Kugel 80
RO S D ABG EG(t) (kN) M e1
820L03040 2,8 89,3 EA EA825L0304C 2,8 89,3 9747 0279
Kupplungsträger mit SW 330 und SW 390RO Spurweite S* D Lochbild Bohrung Bolzen
(mm) (t) (kN) (mm) (mm) (mm)
899D30100 330 2/0 89,3/102 83x 56 M10 25899D30300 330 2/0 89,3/102 120x 55 M14 25899D30400 330 2/0 89,3/102 140x 80 M16 25899D30501 330 3/0 89,3/102 160x100 M20 25899D9050C 390 3/1 98,1/102 160x100 M20 25* Für Kupplung 560 Adapter 71053 nötig – S = 0 t
Kupplungskugel 50 mm für Pkw AnhängerRO Lochbild D S EG
(mm) (kN) (kg) e4
KK260 83x56 22,5 275 2462KK370 83x56 24,8 300 2358KK390 83x56 22,1 270 2124
Automatische Kupplung mit 50 mm Bolzen für Lkw AnhängerRO Lochbild S3 D Dc2 V2 ABG EG94/20
(mm) (t) (kN) (kN) (kN) M Kl. S e1
560A6000C 160x100 1,0 190 106 45,6 – 0404560B6000C1 160x100 1,0 190 106 45,6 – 04041 Handhebel abwärts 2 bei Anwendung außerhalb LoF-Bereich3 Mit Kupplungsträger ROE 70904 – S = 1 t
Für John Deere 8000/8R SerieROi820L2134C Zuglasche mit Piton-Fix ROi825L2134C Zuglasche mit Kugel 80 RO S D ABG EG
(t) (kN) M e1
820L2134C 3 89,3 EA EA825L2134C 3 89,3 EA EA
Drawbar for 6000, 7000 und 8000 series
RO✶825 L • Drawbar with KS80 (ball)
• For John Deere 8000/8R serie
ROS(t)
D(kN) ABG EG
825 L 2134* 2,8 89,3 –
RO✶820 L• Drawbar with Piton-Fix
• For JD 6000-7030
ROS(t)
D(kN) ABG EG
820 L 0304* 2,8 89,3 EA EA
RO✶825 L• Drawbar with KS80 (ball)
• For JD 6000-7030
ROS(t)
D(kN) ABG EG
825 L 0304* 2,8 89,3
For original swinging drawbar by John Deere
RO✶820 L• Drawbar with Piton-Fix
• For John Deere 8000/8R serie
ROS(t)
D(kN) ABG EG
820 L 2134* 3 89,3 –
* Technical status
ROCKINGERMember of JOST-World 5
Heavy Duty!
Heavy Duty!
Heavy Duty!
Ladders and Equipment for 6000, 7000 and 8000 HD series
RO✶820 L • Drawbars with Piton-Fix
• Heavy Duty
RO for seriesS(t)
D(kN) ABG EG
820 L 3334* 6000 / 7000 4 97,1820 L 3734* 8000 / 8R 4 97,1
Mounting drawbar, adapter plate and fastening pin have to be ordered additonally.
RO✶825 L• Drawbar with KS80 (ball)
• Heavy Duty
RO for seriesS(t)
D(kN) ABG EG
825 L 3334* 6000 / 7000 4,5 97,1825 L 3734* 8000 / 8R 4,5 97,1
Mounting drawbar, adapter plate and fastening pin have to be ordered additonally.
RO✶880 R • Ladder for high adjustable hitches
• With frame for drawbars with KS80 (ball) (frame 40x200 mm ROE 75L124) or Piton-Fix
ROTrack width
(mm)S(t)
D(kN) ABG EG
880 R 3304* 330 2/41 89,31 below PTO
ROE for series
ROE70L467 drawbar adapter (75 mm plate with ZPH and 27,5 mm pin); RO820/825 L 3334 C drawbar Piton-Fix or KS80 (ball); ROE 75L133 screw set
JD 6100-6534, 6105R-6130R, 6115M-6130M
ROE70L468 drawbar adapter (53 mm plate with ZPH and 27,5 mm pin); RO820/825 L 3334 C drawbar Piton-Fix or KS80 (ball); ROE75L134 screw set
JD 6630-6930, 7000-7530, 6140R-6150R, 6140M-6170M
ROE70L495 drawbar adapter (53 mm plate with ZPH and 27,5 mm pin); RO820/825 L 3334 C drawbar Piton-Fix or KS80 (ball); ROE75L135 screw set
JD 6170-6210R
ROE70L351 drawbar adapter (30 mm plate with ZPH and 27,5 mm pin); RO820/825 L 3334 C drawbar Piton-Fix or KS80 (ball) JD 7730, 7830, 7930ROE70L306 drawbar adapter (75 mm plate with ZPH and 31,5 mm pin); RO820/825 L 3734 C drawbar Piton-Fix or KS80 (ball); not useable with special JD Option "Stabilizer de Luxe"
JD 8R, 8245-8345
ROE70L468 drawbar adapter (53 mm plate with ZPH and 27,5 mm pin); RO820/825 L 3334 C drawbar Piton-Fix or KS80 (ball); ROE75L134 screw set
JD 7R in combination with Ladder RO 889 B 3504 C
Equipment Order No.Installation kit for forced steering with pin ROE 74 L 131Installation kit for forced steering with ball ROE 74 L 130
Accessories
* Technical status
6 ROCKINGERMember of JOST-World
Ladders and drawbars for 7R seriesTrack width for all ladders for series 7R is 390 mm
RO✶820 L• Drawbar with Piton-Fix-drawbar
ROS (t)
D (kN)
length freely electable (mm) ABG EG
820 L 3534* 4,0 100 max. 160Remark: Only use with RO 889 B 3504 C and appropiate detent ROE 74 L 15940
RO✶825 L • Drawbar (with forced steering) with KS80 (ball)
ROS (t)
D (kN)
ength freely electable (mm) Forced steering ABG EG
825 L 3564* 4,5 100 160 with forced steering ball ø50825 L 3534* 4,5 100 160 without forced steering825 L 3574* 4,5 100 160 with forced steering pin ø30
Remark: Only use with RO 889 B 3504 C and appropiate detent ROE 74 L 15940
RO✶801 L• Swinging drawbar with different span
ROS1 (t)
D (kN) ABG EG
801 L 0800* 1,7 / 2,5 82,41 different span
RO✶889 C• Ladder with Piton-Fix
ROVertical load KS80
(t)Vertical load
(t) D (kN) ABG EG889 C 3514* 3,0 2 / 41 1001 below PTO
RO✶889 K• Ladder with integrated KS80 (ball)
ROVertical load PF
(t)Vertical load
(t) D (kN) ABG EG889 K 3534* 3,5 2 / 41 1001 below PTO
Equipment Order No.Forced steering K50 optionally (left) ROE 74 L 161Forced steering K50 optionally (right) ROE 74 L 162Forced steering D30 optionally (left) ROE 74 L 173Forced steering D30 optionally (right) ROE 74 L 174
RO✶889 B• Ladder with swinging drawbar for KS80 (ball) or Piton-Fix
ROVertical load swinging
drawbar (t)Vertical load
(t) D (kN) ABG EG889 B 3504* 4,5 2 / 41 1001 below PTO
* Technical status
Drawbar detent ROE 74 L 15940
Swinging drawbar latch
ROE 74 L 16040
ROCKINGERMember of JOST-World 7
Ladders and drawbars for 8R seriesTrack width for all ladders for series 8R is 390 mm
RO✶889 C• Ladder with Piton-Fix
ROVertical load KS80
(t)Vertical load
(t) D (kN) ABG EG889 C 5514* 3,0 2 / 41 1001 below PTO
RO✶889 K• Ladder with integrated KS80 (ball)
ROVertical load PF
(t)Vertical load
(t) D (kN) ABG EG889 K 5534* 3,5 2 / 41 1001 below PTO
RO✶889 B• Ladder with swinging drawbar for KS80 (ball) or Piton-Fix
ROVertical load swinging
drawbar (t)Vertical load
(t) D (kN) ABG EG889 B 5504* 4,5 2 / 41 1001 below PTO
RO✶889 A• Ladder for high adjustable hitches
ROVertical load
(t) D (kN) ABG EG889 A 5504* 2 / 41 1001 below PTO
Drawbar latch and drawbar detent in preparation
* Technical status
8 ROCKINGERMember of JOST-World
32 ROCKINGERMember of JOST-World
110
l16
,5
138228
150
106
52
200
182
88
62
57l30,6
17
37
5214
070
R 36
18
131
320,4
53 186
24,5
114
156
1 min.
RO mit Bock Bolzen S D ABG EG with support Pin (kg) (kN) M e1
850 A 01342 – 70231 2 73,5 5038 0055850 A 01512 65585 70231 2 73,5 5038 0055 850 A 02342 – 70336 2 73,5 5038 0055850 A 02512 65590 70336 2 73,5 5038 0055
RO mit Bock Bolzen S D ABG EG with support Pin (kg) (kN) M e1
860 A 0134 C – 70231 2 73,5 9606 0152860 A 0151 C 65585 70231 2 73,5 9606 0152 860 A 0234 C – 70336 2 73,5 9606 0152860 A 0251 C 65590 70336 2 73,5 9606 0152
ANHÄNGEKUPPLUNG TOWING HITCH
ROi850 A / ROi860 A John Deere 6000 – 6920
Bolzen / Pin l 25 mm/70321l 32 mm/70336
Technische Daten x automatische Anhängekupplung mit
Steckbolzenlager x zylindrischer Kupplungsbolzen: l 30,6 mm
x verwendbar für John Deere Serien 6100 – 6300 = 810 A 01 6400 – 6900 = 810 A 02
Technical data x automatic towing hitch with
bolt on bearing x cylindrical hitch pin l 30,6 mm
x usable for John Deere series 6100 – 6300 = 810 A 016400 – 6900 = 810 A 02
Technische Daten – 860A x automatische Anhängekupplung mit
Steckbolzenlager x balliger Kupplungsbolzen: l 38 mm x nur für John Deere Serie 6000 - 6920 x vorbereitet für mechanische
Fernbedienung
Technical data – 850A x automatic towing hitch with plug in
bearing x crowned hitch pin l 38 mm x usable with John Deere 6000 – 6920 x prepared for mechanical remote
control
Zugösen Drawbar eyesDIN Nennmaße Schwenkwinkel / turn-angle a (mm) b (mm) c (mm) horizontal vertical
11026 100 40 42 min. 90h min. 20h 11043 100 40 32 min 90h min. 20h 74054 100 40 30,5 min. 90h min. 20h
LoF-Katalog D-GB 1011.indd 32 13.10.11 21:38
32 ROCKINGERMember of JOST-World
110
l16
,5
138228
150
106
52
200
182
88
62
57l30,6
17
37
5214
070
R 36
18
131
320,4
53 186
24,5
114
156
1 min.
RO mit Bock Bolzen S D ABG EG with support Pin (kg) (kN) M e1
850 A 01342 – 70231 2 73,5 5038 0055850 A 01512 65585 70231 2 73,5 5038 0055 850 A 02342 – 70336 2 73,5 5038 0055850 A 02512 65590 70336 2 73,5 5038 0055
RO mit Bock Bolzen S D ABG EG with support Pin (kg) (kN) M e1
860 A 0134 C – 70231 2 73,5 9606 0152860 A 0151 C 65585 70231 2 73,5 9606 0152 860 A 0234 C – 70336 2 73,5 9606 0152860 A 0251 C 65590 70336 2 73,5 9606 0152
ANHÄNGEKUPPLUNG TOWING HITCH
ROi850 A / ROi860 A John Deere 6000 – 6920
Bolzen / Pin l 25 mm/70321l 32 mm/70336
Technische Daten x automatische Anhängekupplung mit
Steckbolzenlager x zylindrischer Kupplungsbolzen: l 30,6 mm
x verwendbar für John Deere Serien 6100 – 6300 = 810 A 01 6400 – 6900 = 810 A 02
Technical data x automatic towing hitch with
bolt on bearing x cylindrical hitch pin l 30,6 mm
x usable for John Deere series 6100 – 6300 = 810 A 016400 – 6900 = 810 A 02
Technische Daten – 860A x automatische Anhängekupplung mit
Steckbolzenlager x balliger Kupplungsbolzen: l 38 mm x nur für John Deere Serie 6000 - 6920 x vorbereitet für mechanische
Fernbedienung
Technical data – 850A x automatic towing hitch with plug in
bearing x crowned hitch pin l 38 mm x usable with John Deere 6000 – 6920 x prepared for mechanical remote
control
Zugösen Drawbar eyesDIN Nennmaße Schwenkwinkel / turn-angle a (mm) b (mm) c (mm) horizontal vertical
11026 100 40 42 min. 90h min. 20h 11043 100 40 32 min 90h min. 20h 74054 100 40 30,5 min. 90h min. 20h
LoF-Katalog D-GB 1011.indd 32 13.10.11 21:38
Manual and automatic pin hitchFor use in ladders for John Deere series 3100 – 3400, 1350 – 2850, 3050 – 3650, 5620 – 5820, 6000 – 6930, 7600 – 7930, 8100 – 8530
For pinning in series: 6100 – 6300 (A01), 6400 – 6600 (A02), 3040 – 3650 A (A40)
RO✶850 A • Automatic towing hitch with 30,6 mm pin
RO✶860 A • Automatic towing hitch with 38 mm pin
RO PinS(t)
D(kN) ABG EG
850 A 0134* 70231 2 73,5850 A 0234* 70336 2 73,5860 A 0134* 70231 2 73,5860 A 0234* 70336 2 73,5850 A 4034* – 1,8 70,0 –860 A 4034* – 1,8 70,0 –
RO✶810 D • Manual towing hitch
• With 30,5 mm insert pin*
ROTrack width
(mm)S(t)
D(kN) ABG EG
810 D 30045 330 2 97,1810 D 90045 390 2 98,1
Insert pin not included in delivery contents
1 = ROE 66887; 2 = ROE 66984; 3 = ROE 67086
RO✶855 D • Automatic towing hitch with 30,6 mm cylindrical hitch pin
• Equipped for safety sensor
RO✶865 D • Automatic towing hitch with 38 mm crowned hitch pin
• Equipped for safety sensor
RO✶873 D • Automatic towing hitch with 36 mm pin
• For 40 and 50 mm DIN-Towing eye and swiss drawbar eye
* Technical status
RO inc. safety sensorTrack width
(mm)S(t)
D(kN) ABG EG
855 D 3034* 855 D 30D 4C 330 2 120855 D 9034* 855 D 90D 4C 390 2 120865 D 3034* 865 D 30D 4C 330 2 120865 D 9034* 865 D 90D 4C 390 2 120873 D 3034* - 330 2 97,1873 D 9034* - 330 2 98,1
ROCKINGERMember of JOST-World 9
Ball hitch for use in Ladders
Piton-Fix for use in ladders
RO✶820 X • With Piton-Fix for insert in ladders
ROTrack width
(mm)S(t)
D(kN) ABG EG
820 X 3000* 330 3 89,3820 X 9000* 390 3 98,1
RO✶820 A • With Piton-Fix for insert in ladders
ROTrack width
(mm)S(t)
D(kN) ABG EG
820 A 3044* 330 3 89,3820 A 9044* 390 3 –
RO✶825 A • For insert in ladders
ROTrack width
(mm)S(t)
D(kN) ABG EG
825 A 3044* 330 4 89,3825 A 9044* 390 4 –
Equipment Order No.Fastening kit forced steering ROE 74 L 026
RO✶825 B • With height adjus screws
ROTrack width
(mm)S(t)
D(kN) ABG EG
74 L 04440 330 3 89,374 L 10640 390 4 98,1
Equipment Order No.Fastening kit forced steering ROE 74 L 026
* Technical status
10 ROCKINGERMember of JOST-World
Other Towing hitches and old discontinued models
ROHole pattern
(mm)S
(kg)D
(kN) EGKK 260 83 x 56 275 22,5KK 370 83 x 56 300 24,8KK 390 83 x 56 270 22,1
Hitch ball • 50 mm
ROTrack width
(mm)S1
(t)D
(kN)Hole pattern
(mm)Hole (mm)
Pin (mm) ABG EG
899 D 3010* 330 2 / 0 89,3 / 102 83 x 56 M10 25899 D 3030* 330 2 / 0 89,3 / 102 120 x 55 M14 25899 D 3040* 330 2 / 0 89,3 / 102 140 x 80 M16 25899 D 3050* 330 3 / 0 89,3 / 102 160 x 100 M20 25899 D 9050* 390 3 / 1 98,1 / 102 160 x 100 M20 251 for hitch 560 adapters are required 71053 – S = 0 t
Hitch Support • With track width 330 or 390
Accessories
* Technical status
RO✶560 X • Towing hitch for use on trucks, with 48 mm mounted on support plate
ROE 70904 / ROE 70 L 469
ROTrack width
(mm)S(t)
D(kN) ABG EG
560 X 3000* 330 1,0 93,6560 X 9000* 390 1,0 93,6
ROCKINGERMember of JOST-World 11
Towing hitch for combine and forage harvester
RO✶841 B • Automatic towing hitch with 38 mm pin
• For flange bearing
ROHole pattern
(mm)S
(kg)D
(kN) Dc1
(kN) V1
(kN) ABG EG841 B 3000* 120 x 55 500 60 45 15,61 for applications beyond agiculture and forestry
RO✶846 B • Automatic towing hitch with 38 mm pin
• For flange bearing
• With release lever
• Prepared for remote control
ROHole pattern
(mm)S
(kg)D
(kN) Dc1
(kN) V1
(kN) ABG EG846 B 3030* 120 x 55 500 60 45 15,61 for applications beyond agiculture and forestry
RO✶850 B • Automatic towing hitch with 30 mm cylindrical pin or with 38 mm crowned pin
• For flange bearing
• With safety sensor (optional)
ROHole pattern
(mm)S(t)
D(kN) ABG EG
850 B 4030* 140 x 80 2 82855 B 4030* 140 x 80 2 82860 B 4030* 140 x 80 2 82865 B 4030* 140 x 80 2 82
RO✶810 B • Manual towing hitch with insert pin
• For flange bearing
* Technical status
ROHole pattern
(mm)S(t)
D(kN) ABG EG
810 B 3000* 120 x 55 1,5 50,0810 B 4000* 140 x 80 1,5 78,2810 B 5000* 160 x 100 2 89,3
Insert pin not included
1 = ROE 66887
11
12
10
8
5
4
7
1
2
68
996
3
3
13
14
3 Landing gearsLanding gears with variable bolting heights, crank handles, connection shaft-lengths and foot types, special landing gears for special applications
2 King pins2" and 3½" king pins with a conical or plate-shaped flange
6 Ball bearing turntablesBall bearing turntables and slewing rings in a wide range of sizes and versions
7 Container technologyComponents for intermodal transports, supports, twist locks and bolsters, swap body lifting devices, guide roller bearings and bearings
5 HubodometersUsed to calculate distance driven, independent of the truck
4 Axle systemsWide range of weight-saving trailer axles with additional special equipment
1 Fifth wheel couplings and systems2" and 3½" fifth wheel couplings in a variety of construction heights, bearing types and versions, mounting plates, sliders and dual-height fifth wheel systems; sensor-controlled systems for the coupling procedure between truck and trailer 9 Drawbars and towing eyes
Drawbars and towing eyes as well as custom-made products for on and off-road usage
8 Road trafficOpen-end, hook and ball towing hitches, suspension elements, VARIOBLOCK alternating system and special models
10 AgricultureOpen-end, hook and ball towing hitches, height adjustable brackets and clutch carriers for agriculture and forestry
11 Steering systems Axel-independent or manufacturer-independent mechanically, hydraulic and electronically controlled steering systems for trailers
12 Axle suspensions Air suspension or hydraulically suspended axle suspensions for on and off-road usage
13 Vehicle-mounted hydraulic systems Front end, underbody and tipping ejector cylinders for trucks and trailers / trailer tippers
14 Customer-specific hydraulic component kits Hydraulic component kits for various applications, chassis-specific hydraulic container component kits
JOST, Germany Tel. +49 6102 295-0, [email protected], www.jost-world.comFLY
017
006
EN
_10-
2017
S
ubje
ct to
cha
nge
with
out p
rior
notic
e