For: ISSA Workshop 2013 Presented By: Blaine D. Hone and Jon James VSS Macropaver / Reed...
-
Upload
lewis-ward -
Category
Documents
-
view
216 -
download
3
Transcript of For: ISSA Workshop 2013 Presented By: Blaine D. Hone and Jon James VSS Macropaver / Reed...
For: ISSA Workshop 2013
Presented By: Blaine D. Hone and Jon James
VSS Macropaver / Reed International
P.O. Box 178, Hickman, CA 95323 USA(209) 874-2357 – Phone
Email: [email protected]: www.slurry.com
UsesHow it worksOperation
MaintenanceParts and schedulesCleaning and storage
TroubleshootingSource Based ProblemsSolutions
Spreader Box Outline
What does the Spreader Box Do?
Even distribution Consistent texture Complete seal
▪ Connect
▪ Control
▪ Adjust
Frame – contains material
Flaps – texture
Augers
Adjustment
Catwalks/access
Drag Links
Microsurfacing 8’ – 14’
Rut Filling
Expandable Microsurfacing
8’ – 14’
Slurry Seal 8’ – 13’
Controls Up/Down Left/Right Consistency (augers)
On-truck operator Box monitoring Control design
Box operators In box Out of box
What is the difference between Slurry and Micro Surfacing?
Surface Treatments Scratch Course / Leveling Course Finish Course Rut Fill
Quality Even
distribution▪ Rate of
application▪ Box Level▪ Auger monitoring
Consistent texture▪ Strike off▪ Hand work
Complete seal▪ Mix fluidity▪ Rate of
application
Operator
Box/hand work crew
Who has your back?
Tips and Tricks Adjustment Box level Strike off Hand work Number of passes
Parts Wear parts Moving parts Stationary parts
Storage/cleaning Regular Use Seasonal
What could go wrong in your box? Source Based Problems
▪ Equipment▪ Material▪ Anomalies
Solutions▪ Settings▪ Controls▪ Operators
UsesHow it worksOperation
MaintenanceParts and schedulesCleaning and storage
TroubleshootingSource Based ProblemsSolutions
Pugmill Outline
Purposes
Receive
Mix
Dispense
FunctionsParts Shell Shafts Paddles Paddle Tips Drive
Hold material Turn the paddles Hold paddle tips Mix material Turn shaft
Functions Regulate/control Material exits Stop material Distribute to box
Parts Control Chute Gate Diverter
ControlsVisualsHow to. . .(and why would you. . .)
▪ Stop/Go▪ Move material forward/backward▪ Increase/decrease flow▪ Change mix consistency in pugmill
Parts to maintain Wear parts Permanent parts
Planned maintenance Cleaning/Storage
• What to do if. . .• Loose Paddles (vibration noise)• Broken/Cracked paddles• Chunks coming out• Mix problems• What else?
What we have covered: Spreader Boxes
▪ Operations▪ Maintenance▪ Troubleshooting
Pugmill▪ Operations▪ Maintenance▪ Troubleshooting
Consider yourself an expertLike. . .