COMMON

ENTRANCE EXAMINATION

(An apex body of 8 minority institutions of U.P.

(Regd.)Approved by AICTE and affiliated to GBTU/MMTU Lucknow (Formerly UPTU)

CONSORTIUM OF MINORITY PROFESSIONAL EDUCATIONAL INSTITUTIONS, U.P

IN

FO

RM

AT

IO

N B

RO

CH

UR

E

For Admission - Session - 2011-2012

Conducted by -

Through

Approved by AICTE and affiliated to GBTU & MTU Lucknow (Formerly UPTU)

MBA / MCA /B.Tech./ B.Pharm & B.FAD

All India Management Association

Sunday 22nd May 2011

IMPORTANT DATES

Sale of Application Forms Saturday, 5th Mar 2011

Last date of submission of completed Application forms Monday, 02nd May 2011

Written Entrance Examinations to be held at approved Center(s) Sunday, 22nd May 2011

Declaration of Result Tuesday, 02nd June 2011

Intimation to successful candidates on E-mail / by post Monday, 20th June 2011

SCHEDULE OF EXAMINATION

Date of Name of Subjects Timing TotalExamination Paper Period

May 22, 2011 Paper 1 Physics, Chemistry & 10:00 AM 2 HoursSunday Mathematics For B.Tech./ to 12:00 Noon

May 22, 2011 Paper 2 Physics, Chemistry & 10:00 AM 2 HoursSunday relevant aptitude test to 12:00 Noon

questions for B.Pharma

May 22, 2011 Paper 3 Relevant Aptitude test 10:00 AM 2 HoursSunday questions for B.FAD to 12:00 Noon

May 22, 2011 Paper 4 Aptitude Test for MBA 10:00 AM 2 HoursSunday to 12:00 Noon

May 22, 2011 Paper 5 Aptitude Test for MCA 10:00 AM 2 HoursSunday to 12:00 Noon

TO WHOM CONTACT

Contact Address:- / Fax / Mob

CONSORTIUM OF MINORITY PROFESSIONAL EDUCATIONAL 9236247477

INSTITUTIONS, 5- New Grand Market, Near Burlington Crossing, www.cmpei.inCantt. Road, Lucknow-226001

The Registrar Phone : 0522-2817609Azad Institute of Engineering & Technology, Azadpur, Fax : 0522-2817609adjacent CRPF Camp, Post Chandrawal via Banglabazar Road, Mob.: 9415013339, 9335207898Lucknow-226002 www.agei.in

Jahangirabad Educational Trust Group of Institutions Phone : 05248-320800Jahangirabad Fort, Jahangirabad Barabanki- 225203 Mobile no. 9936612612, www.jit.edu.in

Vidya College of Engineering Phone : 0121-2439188,89,92Vidya Knowledge Park, Baghpat Road, Meerut - 250002 www.vidya.in

Phone /Web0522-2202778,

Prin

ted

: P

ratib

ha

Prin

ting

Pre

ss L

ko.

Ph.:

26

30

68

6

INDEX

S.No. Content Page No.

1. Introduction 1

2. Intake Capacity of Member Institutes 2

3. Details About The Member Institutes 3

4. Admission Schedule 7

5. Purchase and Submission of Application Forms 8

6. General Instructions for Candidates 8

7. Admission Criteria 11

8. Eligibility for Admission 11

9. Papers and Subjects For Common Entrance Examination-2011 12

10. Schedule of Examination 12

11. Admit Card 13

12. Medium & Mode of Examination 13

13. Evaluation and Declaration of Result 13

14. Domicile Requirements 13

15. Medical Standards 13

16. Counseling 14

17. Tuition Fees 14

18. Syllabus for COMPEI CEE 2011 15

19. Formats for Certificates 22

a. Domicile Certificate 22

b. Undertaking By Candidate For Medical Fitness 22

c. Format For Medical Certificate 23

d. Character Certificate 24

20. Annexure-1 for list of examination centres

21. Application form

ROLE OF CONSORTIUM OF MINORITY PROFESSIONAL EDUCATIONAL INSTITUTIONS (COMPEI)

CONSIDERING REAL WORLD & ITS CHALLENGES

Vision

Mission

1. Empowerment of Minority Institutions 2. Providing an avenue for Technical Education to all Minority students 3. Enhance the opportunities of admissions to all Minority students in UG & PG Programmes.4. Bring awareness among Minority students to fulfill their professional objectives.5. To formulate and implement educational schemes and plans for the benefit of the educationally backward Minorities in particular and weaker sections in general.6. To promote research and encourage other efforts designed to mould educational policies of the State for the benefit of the educationally backward Minorities.7. To collaborate with norms of the Government and other Societies pursuing the objective similar to those of the Consortium.8. To serve and uplift among Minority Communities, the poor, depressed, backward and other for their betterment and to improve their Social, Educational and Economic status.

To transform the member Institutions in the modern multi-role Institutes engaged in teaching, research and entrepreneurship activities of international level by accepting the challenges that are embedded in this new role of Consortium.

To provide a technical environment where the discipline and the talent of students and faculty members are developed and used to generate new knowledge and technology for the benefit of society.

Quality Policy

The quality policy of COMPEI follows its mission and vision which places an emphasis on enterprise and entrepreneurship, innovation and creativity. Since these qualities are the best inculcated through the environment of work and play, COMPEI in its long-term quality policy will strive to create an atmosphere of easy interaction among students and faculty, spirit of freedom in thoughts, action and environment of churn and diversity

Let us come under a Common Umbrella of COMPEI and move towards Prosperity & Empowerment

Common Entrance Exam vk;ksftr djus dh ftEesnkjh All India Management

Association (AIMA), New Delhi dks nh xbZ gSA fnuk¡d 05 ekpZ 2011 ls mDRk 8 dkyst ifjlj ds

vfrfjDr HDFC Bank & Punjab National Bank dh 'kk[kkvksa ls czks'kj ftlesa vkosnu QkeZ layXu gS]

izkIr fd, tk ldsaxsA

vkosnu QkeZ osclkbV www.specialtest.in/compei2011 ls Hkh MkmuyksM fd, tk ldrs

gSaA Hkjs gq, vkosnu QkeZ fu/kkZfjr 'kqYd :0 600 ds fMekaM Mªk¶V lfgr AIMA dks vfUre frfFk

02 ebZ 2011 rd izsf"kr fd, tk,saxsA

INSTITUTES GBTU Code

1. Azad Institute Engineering & Technology, Lucknow 053

2. Azad Institute of Pharmacy & Research, Lucknow 197

3. Awadh Institute of Technology, Lucknow 650

4. Jahangirabad Educational Trust Group of Institutions, Barabanki 545 & 599

5. Lucknow Institute of Technology, Lucknow 362

6. Vidya College of Engineering, Meerut 229

7. Vidya Institute of Fashion Technology, Meerut 318

8. Vidya School of Business, Meerut 263

izns'k ds All India Council for Technical Educational, New Delhi ls ekU;rk izkIr

fuEu vkB ekbukfjVh dkystksa us feydj Consortium of Minority Professional Educational

Institutions U.P dk xBu fd;k gS tks vkxkeh 'kSf{kd o"kZ 2011&12 fd fy, B.Tech., B.Pharma.,

B.FAD., MBA, MCA ds dkslsZt dk fnuk¡d 22 ebZ 2011 ¼fnu jfookj½ dks ns'k ds 35 'kgjksa esa

Common Entrance Exam djok,xhA

List of centres where CEE for admission of respective minority community students in theinstitutions for the session 2011-2012 will be held.

Annexure-I

S.N. State Centres Centre Code

1. Uttar Pradesh 01

2. Uttar Pradesh Aligarh 02

3. Uttar Pradesh Allahabad 03

4. Uttar Pradesh Azamgarh 04

5. Uttar Pradesh Barabanki 05

6. Uttar Pradesh Barelli 06

7. Uttar Pradesh Bulandshahr 08

8. Uttar Pradesh Faizabad 09

9. Uttar Pradesh Ghaziabad 10

10. Uttar Pradesh Gonda 11

11. Uttar Pradesh Gorakhpur 12

12. Uttar Pradesh Jaunpur 13

13. Uttar Pradesh Jhansi 14

14. Uttar Pradesh Kanpur 15

15. Uttar Pradesh Lucknow 16

16. Uttar Pradesh Meerut 17

17. Uttar Pradesh Moradabad 18

18. Uttar Pradesh Varanasi 19

19. Utranchal Dehradun 20

20. Bihar Bhagalpur 21

21. Bihar Chappra 22

22. Bihar Gaya 23

23. Bihar Kishanganj 24

24. Bihar Muzaffarpur 25

25. Bihar Patna 26

26. Bihar Siwan 27

27. Delhi Delhi 28

28. West Bengal Kolkata 28

29. West Bengal Midnapur 29

30. West Bengal Murshidabad 30

33. Jharkhand Ramgarh 33

34. Jharkhand Ranchi 34

Agra

31. Assam Gauwhati 31

32. Jharkhand Jameshdpur 32

35. Jammu & Kashmir Srinagar 35

Note :- Proposed, final list shall be finalised based on the no. of candidates at each centres. If the no. of candidates at any centre isless than 50 it will be merged with next closest centre.

INTRODUCTION

The following institutions have been granted Minority Status Certificate by National Commission for

Minority Educational Institutions New Delhi (NCMEI)

1. Azad Institute of Engineering & Technology, Lucknow. (Muslim Minority)

2. Azad Institute of Pharmacy & Research, Lucknow. (Muslim Minority)

3. Awadh Institute of Technology, Lucknow. (Muslim Minority)

4. Jahangirabad Educational Trust Group of Institutions, Jahangirabad, Barabanki. (Muslim Minority)

5. Lucknow Institute of Technology, Lucknow. (Muslim Minority)

6. Vidya College of Engineering, Meerut. (Jain Minority)

7. Vidya Institute of Fashion Technology, Meerut. (Jain Minority)

8. Vidya School of Business, Meerut. (Jain Minority)

As regards the admissions to the various courses being run in the Minority Institutions the Govt. has

decided the following policy and procedure will be adopted.

a. 50% of the seats will be filled by the Technical University through counseling based on the result of State

Entrance Exam (UP-SEE).

b. 50% seats will be filled by the Management of the Institutes from the candidates of their community subject to

the conditions as laid down by the U.P. Govt./Technical University.

Honb’le Supreme Court of India under writ petition of ISLAMIC ACADEMY OF EDUCATION

Vs. STATE OF KARNATAKA & P.A. INAMDAR case has clarified that:-

1. Minority Institutions are free to admit students of their own choice including students of non-minority

community as also members of their own community from other States.

2. Institutions imparting same or similar professional education situated in one State or in more than one

State may join together as one group of institutions for holding a Common Entrance Examination.

Consequently as per direction of Honb’le Supreme Court and Govt. of UP the above named Institutions have

formed a society known as Consortium of Minority Professional Educational Institutions with its

headquarter at Lucknow. 5-NEW GRAND MARKET, CANTT. ROAD, HUSAINGANJ, LUCKNOW.

The Governing Body of the consortium vide its resolution no. 03 dated 29.12.2010 has decided to hold

Common Entrance Examination for admission of respective minority community students in the Institutions

for the session 2011-2012. Common Entrance Exam will be held for all the courses being run by the member

Institutions of the consortium at the centres as per list under. Annexure-01

The details of such courses & Intake are given Institution wise on next page.

CONSORTIUM OF MINORITY PROFESSIONAL

EDUCATIONAL INSTITUTIONS, U.P. (COMPEI, U.P)

1

NNA

ME

OF

IN

ST

ITU

TIO

NS

CS

IT

EE

EL

AZ

AD

IN

ST

ITU

TE

OF

EN

GIN

EE

RIN

G &

TE

CH

NO

LOG

Y, L

UC

KN

OW

12

0

60

90

12

0A

ZA

D I

NS

TIT

UT

E O

F P

HA

RM

AC

Y &

RE

SE

AR

CH

, LU

CK

NO

W

-

-

-

AW

AD

H I

NS

TIT

UT

E O

F T

EC

HN

OLO

GY

LU

CK

NO

W

60

-

-

IN T

AK

E C

AP

AC

ITY

OF

ME

MB

ER

IN

ST

ITU

TIO

NS

ST

AT

US

OF

CO

UR

SE

S O

FF

ER

ED

BY

MIN

OR

ITY

IN

ST

ITU

TIO

NS

UN

DE

R C

ON

SO

RT

IUM

OF

MIN

OR

ITY

PR

OF

ES

SIO

NA

L E

DU

CA

TIO

NA

L I

NS

TIT

UT

ION

S-U

P (

CO

MP

EI-

UP

)

INT

AK

E C

AP

AC

ITY

OF

PA

RT

ICIP

AT

ING

IN

ST

ITU

TIO

NS

UG

Co

urs

es

PG

Co

urs

es

CO

MP

UT

ER

SC

IEN

CE

INFO

RM

AT

ION

TE

CH

NO

LOG

Y

ELE

CT

RIC

AL

EN

GIN

EE

RIN

G

ELE

CT

RO

NIC

S E

NG

INE

ER

ING

ME

CH

AN

ICA

L E

NG

INE

ER

ING

ELE

CT

RO

NIC

S I

NS

TR

UM

EN

TAT

ION

ELE

CT

RO

NIC

S I

NS

TR

UM

EN

TAT

ION

& C

ON

TR

OL

ELE

CT

RO

NIC

S C

OM

MU

NIC

AT

ION

EN

GIN

EE

RIN

G

ELE

CT

RIC

AL

& E

LEC

TR

ON

ICS

EN

GIN

EE

RIN

G

CIV

IL E

NG

INE

ER

ING

BA

CH

ELO

R O

F P

HA

RM

AC

Y

BA

CH

ELO

R O

F F

AS

HIO

N &

AP

PA

RE

L D

ES

IGN

ING

MA

ST

ER

OF

BU

SIN

ES

S A

DM

INIS

TR

AT

ION

MA

ST

ER

OF

CO

MP

UT

ER

AP

PLI

CA

TIO

NS

EC

EN CE

B.P

HA

RM

B.F

AD

MB

A

MC

A

B.P

HA

RM

Bra

nch C

od

eB

ran

ch

Co

de

Bra

nch N

am

eB

ranch N

am

e

60

39

01

80

15

01

20

39

06

03

30

18

01

20

10

13

20

30

40

32

34

31

21

00

50

70

14

No

te -

50

% s

ea

ts w

ill

be

fil

led

un

de

r m

ino

rity

qu

ota

.

* A

pp

rova

l a

wa

ite

d

VID

YA C

OLL

EG

E O

F E

NG

INE

ER

ING

ME

ER

UT

90

60

-

VID

YA I

NS

TIT

UT

E O

F F

AS

HIO

N &

TE

CH

NO

LOG

Y, M

EE

RU

T

-

-

-

VID

YA S

CH

OO

L O

F B

US

INE

SS

ME

ER

UT

-

- -

LUC

KN

OW

IN

ST

ITU

TE

OF

TE

CH

NO

LOG

Y L

UC

KN

OW

60

60

-

60

21

0

60

60

60

JAH

AN

GIR

ABA

D E

DU

CATI

ON

AL

TRU

ST G

ROU

P O

F IN

STIT

UTI

ON

S.BA

RA

BAN

KI.

60

+6

0*

60

+6

0*

60

+3

0*

12

0

42

0

SL 1 2 3 4 5 6 7

CS IT EE

EL

ME

EI

EIC

30

0

27

30

8

2

51

0

54

0

66

0

12

0

60

12

0

Educational Institutions Under

Azad Educational Society5- New Grand Market, Near Burlington Crossing, Cantt. Road, Lucknow

All the institutions are Approved by AICTE & Affiliated to GB Technical University, Lucknow

Azad Educational Society was established and registered in September 1991 under the Societies

Registration Act, 1860. The aim of the society is to develop socially & intellectually

sound citizens by imparting high quality education.

The Group offers a comprehensive mix of undergraduate and postgraduate programmes in the areas of engineering, management and pharmacy.

It has evolved a modern networked '24x7 work and play' environment, which facilitates learning through interaction between diverse group of students and usage of video based course materials (like NPTEL etc.) which helps in reducing the strain in learning.

Besides the curricular requirements, the group places an emphases on the students acquiring soft skills, to be able to succeed in today's globalized work environment. This is facilitated through the 'Finishing School' ideas that have been incorporated into the main stream of education. The Group also provides opportunities to interact with the culturally vibrant city of Lucknow through its evolving City Centre located in the heart of the city.

The oldest institution of the group, running programmes in engineering and management, has already acquired the accreditation from AICTE/NBA and the group as a whole is moving towards acquiring autonomous/university status. The quality of its engineering programmes has made it eligible for being considered for the World Bank Grants towards further improving the employability of its graduates through upgrading the facilities and training the faculty.

The Group is committed to the idea of 'Social Inclusion' to provide equal opportunities to all section of the students with their diverse backgrounds. This diversity in tern is expected to help in inducing an atmosphere of enquiry, criticism and creativity.

Admissions at the State level will be offered through UPTU (MTU) Noida entrance tests (UPSEE), at the national level through AIEE and for the reserved minority students seats through COMPEI, conducted by AIMA. Further details about programmes, eligibility and applying procedure can be obtained from the website Scholarships & relief fund will be available to the economically deprived students from all sections of the society.

Final placement & Summer training by a full fledged and dynamic placement cell. Excellent track record of successfully placing students in prestigious positions in Industry.

List of Companies in which we have successfully placed our students.

accenture

L I F E I N S U R E N C E

3

Opportunity

Azad Institute of Engineering & Technology :

P.G.: M.Tech: Mech (Advance CAD), EIC (Instrumentation)

CS (Distib. Comp.-Evn. Prog), IT (Infra Mngt - Evn. Prog

MCA, MBA (several specializations,

M.Pharma : Pharmaceutics, Pharmaceutical Chemistry

Azad Institute of Technology :

U.G.: B.Tech: Civil, CS, EE, E-Com, Mech.

Azad College of Management Studies:

P.G.: PGDBM

Azad Degree College

U.G: BBA (affiliated to Lucknow Univ.)

Azad Institute of Pharmacy and Research:

M.Pharma : Pharmaceutics, Pharmaceutical Chemistry, U.G: B.Pharm

* All programmes have AICTE Approval and are affiliated GB Tech. University, Lucknow

Approved by AICTE & Affiliated to GB Technical University, Lucknow

Jahangirabad Educational Trust Group of Institution (JETGI) is a residential Campus with suitable accommodation & boarding facilities that not only ensures students intensive involvement in stimulating academic environment, but also in sports, cultural and other enriching activities.

An initiative of Jahangirabad Educational Trust (JET) (Regd.) was setup in the year 2001 and four batches of PG course in Electronic Media, one batch of each MBA and MA-MCJ have passed out since 2006. The institute got approved as integrated campus by the All India Council for Technical Education, Ministry of HRD, Govt. of India in 2009 & started MBA & B.Tech programs through UP Technical University to impart high quality education in a vibrant academic ambience with a faculty of distinguished teachers & seasoned professionals. The institute has been declared GBTU self-examination centre for university exams in a short span of time of its establishment.

The lush green campus is spread over 50 acres and is housed in the historic Jahangirabad Fort. Complete with modern amenities & recreational facilities, the campus is only a few minutes drive away from the town of Barabanki.

Jahangirabad Educational Trust Group of Institutions

Library

Language Lab

Computer Lab

Workshops

Institute has one of the best libraries in the Lucknow region with 14000 books in diverse subjects. There are thousands of e-books, computers with internet access & an air conditioned reading room as well.

The institute has a full-fledged Language Lab to enhance students language speaking skills.

The institute has latest computer hardware & software & round the clock 2 Mbps (1:1) high speed Internet connectivity.

Well equipped Engineering Workshops consisting of Machine Shop, Black Smithy Shop, Foundry Shop, Welding Shop, Sheet Metal Shop Carpentry Shop and Fitting Shop are available for practical exposure to the various machines & tools used in carrying out the mechanical operations.

4

70% previous batches students placed

Campus: Jahangirabad Fort, Jahangirabad, Barabanki-225203Tel:. 05248-320800, 9628090591-9628077619

01 0% Tuition r

Fee Waiver fo

e

30 Merit & 50% waiv r

ndeu

r Girls

rSchola ship

schemes

The institute provides excellent hostel and dining facilities, full power back up, laundry services and above all a secure environment especially for girls.

OTHER FACILITIES

*conditions apply

ACADEMIC FACILITIES

OUR PLACEMENT

Wifi enabled

ac mpus &

tCompu er Lab

Lucknow Institute of Technology, Lucknow

OUR MOTTO : BEST ACADEMIC STANDARD & ASSURED PLACEMENT

GBTU Code 362Azadpuram, Adjacent CRPF Group Centre, Post Chandrawal,

Bijnour-Banthara Road Lucknow-226 002

Lucknow Institute of Technology, Lucknow established in year 2008 (UPTU/GBTU Code-362).The Institute

is approved by All India Council for Technical Education (AICTE) Ministry of HRD, Govt. of India, New Delhi and

affiliated to G.B. Technical University, Lucknow.

LIT is located in serene, calm quite surroundings and has pollution free environment. Lucknow Institute of

Technology, Lucknow has high profile computer labs, Laboratories, Workshops, high standard class rooms, Tutorial

rooms, modern library, modern building, separate Boys & Girls Hostel, transportation facility. Institute has Wifi enabled

campus.

LIT fee is very low but result is very high.LIT has a provision of scholarships for needy, financially weaker and

meritorious students. LIT has association with IIM, Lucknow and other leading Institutions for guest lecture &

educational related activities. Campus selection is also available in our Institute.The Institute believes in practical

interaction between trade, industry and academics in order to play a significant role in social and economic development

of the country. Thus, the aim of the institute is to develop professionals with managerial and technical excellence, social &

cultural sensitivity, ethical responsibility and concern for the environment.

FOR ANY QUERY CONTACT:

0522-2817735, 3231187,09305036060, 09335601164, 9307937607

Website: www.litlucknow.ac.in

E-mail: contact@litlucknow.ac.in

5

• UG Programme: B.Tech. 4 years in following streams

1. Computer Science & Engg. 60

2. Electronics & Communication 60

3. Information Technology 60

4. Electrical & Electronics Engg 60

5. Civil Engineering 60

6. Mechanical Engineering 60

• PG Programme: MBA 2 years

Master of Business Administration 60

COURSES OFFERED

accenture

L I F E I N S U R E N C E

List of Companies in which we shall place our students.

PLACEMENT

City Office : 7, Valmiki Marg, Lal Bagh, Lucknow-226001 Telephone: 0522 - 4004018, 9415105127

Er. M.I.SiddiquiB.Sc.,B.Tech, City & Guilds (London)Rtd. Member (Generation), U.P. State Electricity BoardEx-Member, Indian Institute of Management, Lucknow

Prof. (Dr.) S.S.AlamB.Sc. (Engg.), M.Tech., Ph.D. (IIT Roorkee)Member-F.I.E.,M.M.I.Ch.E.,L.M.-ISHMTAward-Khosla Reserch Prize of University of Roorkee

Director:

Chairman:

CONSORTIUM OF MINORITY PROFESSIONAL

EDUCATIONAL INSTITUTIONS, U.P (COMPEI, U.P)

thi. Availability of Brochure and application form 15 Mar 2011

ndii. Last date of submission of completed Application forms 2 May 2011

thiii. Scrutiny of Applications forms 7 May 2011

thiv. Issue of Admit Cards for Entrance Examinations 12 May 2011

ndv. Written Entrance Examinations to be held 22 May 2011

at approved Center(s)

nd vi. Declaration of Result with list of successful candidates 02 June 2011

selected for Admission in order of Merit along with waiting list will be displayed on the website www.cmpei.in & memberinstitutes website

thvii. Intimation to successful candidates on E-mail / by post 20 June 2011

thviii. Counseling & Admission 04 July 2011

st ix. Academic session to be started 01 August 2011

An Admission committee has been constituted by Consortium of Minority Professional Educational

Institutions for conducting & supervising the Common Entrance Examination for admission of eligible

candidate to various professional courses being offered by Consortium Member Institutions. The Admission

Committee is a high powered Committee and its decision in the matters relating to admissions shall be final.

Confirmed admission will ordinarily be not changed.

Common Entrance Examination will be objective type comprising of subject knowledge and aptitude

type written test and the detailed syllabi are attached in the brochure.

Successful candidates will be called for counseling to finalize the admission as per their choice.

Consortium means - Consortium of Minority Professional Educational Institutions (COMPEI)

AIMA means – All India Management Association who will conduct the Common Entrance

Examination as authorized by Consortium. AIMA is the appex body of management in the federation of

Local Management Association. It is trusted orgainzation and has 15 years experience in conducting various

competitive examinations.

Admission to various courses will be made on the basis of the score in Common Entrance

Examination (CEE). Entrance Examination will be held at the authorized center(s) as per following schedule:

1. ADMISSION SCHEDULE

7

By Post

Rs.250

On Cash

Rs.200

8

2. PURCHASE AND SUBMISSION OF APPLICATION FORMS

3. GENERAL INSTRUCTIONS FOR CANDIDATES:

i. Information Brochure and Application Form may be purchased from the date of th

advertisement upto 27 April 2011 personally from the following institutions.

Azad Institute of Engg & Technology, Azad Puram Post: Chandrawal via Bangla Bazar &

Bijnour Near CRPF Camp,Lucknow-226002 Phone-0522-2817608,2817609

Vidya College of Engg vidya knowledge park, Baghpat Road, Meerut

Jahangirabad Educational Trust Group of Institutions, Jahangirabad Fort, Distt-

Barabanki Phone:05248-320801, 243352, 243373

ii. The candidate may also obtain application form by post from the Registrar Azad Institute of

Engineering & Technology, Azadpur, Post- Chandrawal, Adjacent CRPF Camp Lucknow-

226002 by sending a crossed bank draft in favour of AIET A/C COMPEI-CEE-2011 payable

at Lucknow along with two self addressed stickers.

iii. Application form can also be downloaded from the website : www.specialtest.in/compei

2011 and submitted ON-LINE.

iv. The cost of Information Brochure and Application Form -

Please Enclose Bank Draft of Rs.400/-along with application form

in favour of AIET A/C COMPEI-CEE 2011

v. The Application Form and Brochure will be sent to applicant by registered post/speed post nd

upto 22 April 2011.

vi. The candidate should write his/her name and address on the back of the Demand Draft.

However, the COMPEI will not be responsible if the forms are not (received/delayed) by

post.

vii. Completed application form duly filled in must reach All India Management Association nd

(AIMA) office latest by 02 May 2011 on following address:-

Post Box No. : 4334, Kalkaji Head Post Office (H.P.O.), New Delhi-110019

i. All the candidates are advised to study the Information Brochure thoroughly before filling

and submitting the application form for appearing in Common Entrance Examination.

ii. Candidates should ensure their eligibility that they have passed the qualifying examination

from any recognized Board/University and that they are eligible to seek admission as per

eligibility criteria.

iii. If the candidate has passed qualifying examination from outside U.P. State he has to submit

the domicile certificate in prescribed format.

iv. A candidate who has just appeared or is due to appear in qualifying examination and their

result is likely to be declared before the counseling can also appear in the Common Entrance

Examination. However no candidate will be admitted to any course if the result is not

declared before counseling inspite of his qualifying in Common Entrance Examination.

v. If any certificate or other document submitted by candidate is found forged/false at any stage

the admission to any course will be cancelled and legal action may be initiated against him.

vi. If any Board/University awards only grades and not equivalent percentage of marks then the

decision of the admission committee will be final.

vii. At the time of counseling seats will be allotted as per merit obtained by candidate in Common

Entrance Examination. Choice for particular course will depend upon the availability of seats

in that course in Institution.

viii. If the candidate fails to seek admission on the allotted seat after counseling the fee deposited

before counseling shall stand forfeited.

ix. Result of Common Entrance Examination declared by Admission Committee will be final.

Scrutiny of answer books can be allowed on payment of Rs. 1000/- per paper within 10 days

after the declaration of result.

x. All the Institutions under Consortium have been allowed Minority status by Govt. of UP and

as such 50% seats of each course will be filled from Minority Students including NRI quota

and the rest 50% seats will be filled through Counseling by G.B. Technical

University/Mahamaya Technical University. No other reservation will be applicable.

xi. If any candidate withdraws after completing all formalities of admission and depositing all

fees as required he will be allowed refund of fee as per Govt. orders.

xii. The candidates should attach the self attested photo copy of certificates and documents with

the application form and not the original. Such documents/certificates in original will be

submitted at the time of counseling.

xiii. Candidates are to report to the allotted test centre at least 45 minutes before the scheduled

commencement of the test.

xiv. Neither any candidate will be admitted 15 minutes after the commencement of the test nor

any extra time granted for competing the test.

xv. Candidates are to be in possession of the following when reporting to the test centre:

Document : Admit Card duly completed. Writing Materials : Ball Point Pen, HB Pencils,

Eraser and Sharpener.

xvi. The test room will be opened about 30 minutes before the commencement of the test. The

candidates are to be seated at the allotted place.

xvii. Admit Card will be verified during the test. One part of Admit Card will be given to candidate

as proof of having appeared in the test. Please ensure that this is duly signed by candidate and

the test invigilator.

xviii. The duration of the test is 2 hours. There are 100 questions. All questions are compulsory.

Each question has four options marked (1), (2), (3) and (4).

xix. All questions carry equal mark.

xx. It is the responsibility of candidate to make certain that he understands and follows the

directions for answering. AIMA can accept the responsibility of scanning / capturing answer

accurately only if it is competed in accordance with directions.

xxi. Take the questions in order, but do not waste time pondering over those that seem extremely

difficult or unfamiliar to you. A wise practice is to first answer the questions you are sure of.

Then, if you complete the test before time is called, go back and reconsider any questions

about which you were uncertain.

xxii. Although the MAT stresses on accuracy more than speed, it is important to use the allotted time wisely.

9

Make every effort to pace yourself by making yourself familiar with the mechanics of the test.

xxiii. The directions explain exactly what each set of questions requires to answer those questions.

xxiv. Read all test directions carefully. Read each question carefully and thoroughly. Before

answering a question, determine exactly what is being asked.

xxv. Calculator, Paper, Mobile, etc are not permitted inside the test room.

xxvi. All the questions and instruction of the test will be in English/Hindi only.

xxvii. Candidate will be allowed to leave the test room after the completion of test and only after

permitted by the invigilator. If you wish to leave the room during the test, you must have the

invigilator’s permission. You will not be permitted to make up the time you lose.

xxviii. AIMA reserves the right to cancel the admission/entry to the test/withhold the results of any

candidate who impersonsates/uses unfair means during the test. This is without prejudice to

any other action that can be initiated.

xxix. Non-adherence to any instructions or failure to comply with any rules governing the conduct

of test will lead to cancellation of your candidature.

xxx. All disputes pertaining to any aspect of the test will be settled through any arbitrator, who

shall be appointed by the Director General, AIMA. Further, all legal cases pertaining to any

matter of the test will be dealt with under the jurisdiction of Delhi Court only.

xxxi. The candidate will be provided a sealed Question Booklet and an OMR Answer Sheet. Do not

open the Question Booklet until announced.

xxxii. Fill the necessary information in the space provided on the cover of the Question Booklet and

the Answer Sheet before commencement of the test.

xxxiii. The candidates are to sign the attendance sheet during test duly endorsing the Question

Booklet series as given on the Question Booklet and other details.

xxxiv. Answer are to be marked on the Answer Sheet, which is provided separately. Choose the

correct option and darken the oval completely corresponding to (1), (2), (3) & (4) against the

relevant question number. Use only HB Pencil to darken the oval for answering. Please do not

darken more than one oval against any question, as scanner will not read the same correctly.

xxxv. If you wish to change any answer, erase completely the one already marked and darken the

fresh oval with an HB pencil. Do not tear or bend or mutilate the Answer Sheet.

xxxvi. Rough work, if any, is to be done on the Question Booklet only. No separate sheet will be

provided / used for rough work.

xxxvii. Answer Sheet is scanned by machine and scores are computed. Accuracy in scoring is

dependent on the examinees marking their answer sheets properly and the completeness of

their erasures when used. Therefore accurate scoring is dependent on you strict adherence to

the following points:

� No credit will be given for the answers marked in the question booklets.

� Use HB pencil to complete the answer sheet. Please do not darken more than one oval

against any question, as scanner will not read the same.

� Do not tear, bend or mutilate the answer sheet.

� Be sure that you accurately mark all identification and question booklet series.

xxxviii. At the conclusion of the test you should hand over your Question Booklet and Anser Sheet to

the invigilator.

xxxix. Appropriate civil/criminal proceedings will be initiated against applicant found taking or

attempting to take the full or part of the Question Booklet or Answer Sheet outside the test room.

10

Course Qualifying Exam Compulsory Subjects Anyone of the following subject

B.TECH. 10+2 Physics & Mathematics Chemistry, Bio-Technology,

Biology

B.Pharm 10+2 Physics & Chemistry Mathematics, Bio-Technology,

Biology

B.FAD 10+2 Any Stream

MCA 3 Year Graduation Graduation level Passed Mathematics at 10+2 level or at

Bachelor degree level.

MBA 3 Year Graduation Graduation level Passed

11

4. ADMISSION CRITERIA

5. ELIGIBILITY FOR ADMISSION TO FIRST YEAR OF

B. TECH./B.Pharma/B.FAD/MBA /MCA COURSE

Admission of students to the 1st Year of the various courses under Consortium of

Minority Professional Educational Institutions (COMPEI) shall be made according to the

following criteria.

i. Common Entrance Examination for admission to B.Tech./B.Pharm/B.FAD/MBA/MCA and

other professional courses will be conducted by the COMPEI through All India Management

Association (AIMA). The minimum qualification for appearing in Common Entrance

examination and the schedule of examination shall be as given hereafter.

ii. The Consortium of Minority Professional Educational Institutions (COMPEI) will insert

advertisement in NEWSPAPERS regarding the admissions in different courses being run in the

various Institutions under COMPEI.

iii 50% Admission of sanctioned intake in each course will be through the CEE of COMPEI

conducted through AIMA and the rest 50% admissions will be through UPSEE-2011.

iv. In case the Minority seats in any course remain vacant/left over or dropout the same will be

filled from the candidates in the waiting list. In case the seats still remain vacant COMPEI will

have the right to admit other eligible candidates.

The minimum academic qualification to appear in Common Entrance Examination-2011 (CEE) is a

pass in the final qualifying examination as given below.

6. PAPERS AND SUBJECTS FOR THE COMMON ENTRANCE EXAMINATION-2011

7. SCHEDULE OF EXAMINATION

Date of Name of Subjects Timing Total

Examination Paper Period

22 May, 2011 Paper 1 Physics, Chemistry & Mathematics 10:00 AM 2 Hours

Sunday For B.Tech. to 12:00 Noon

22 May, 2011 Paper 2 Physics, Chemistry & Biology 10:00 AM 2 Hours

Sunday for B.Pharm to 12:00 Noon

22 May,2011 Paper 3 Aptitude Test for B.FAD 10:00 AM 2 Hours

Sunday to 12:00 Noon

22 May, 2011 Paper 4 Aptitude Test for MBA 03:00 PM 2 Hours

Sunday to 5:00 PM

22 May, 2011 Paper 5 Aptitude Test for MCA 03:00 PM 2 Hours

Sunday to 5:00 PM

Paper Subjects Number of Questions Marks

Paper 1 Physics, Chemistry There will be 100 questions in total. 200

& mathematics For *50 objective type questions with equal

B.Tech. And weightage to Physics, Chemistry and

General Aptitude Mathematics.

*50 General Aptitude.

Paper 2 Biology for B.Pharm Total 100 Questions. 50 objective type 200

questions with equal weightage to

Physics, Chemistry & Biology and 50 on

General Aptitude.

Paper 3 Aptitude Test for B.FAD 100 objective type questions 200

(General aptitude)

Paper 4 Aptitude Test for MBA 100 objective questions 200

Paper 5 Aptitude Test for MCA 100 objective questions 200

12

8. ADMIT CARD

i. Admit Card will be sent by post to each candidate byAIMA.

ii. In case of non-receipt of admit Card Duplicate Admit Cards can be downloaded from website

www.specialtest.in/compei2011and can also be collected from the examination centre.

iii. For getting duplicate admit card, the candidate should contact his center of examination. Such

candidates should carry the following to the center:

a. Two passport size photographs (Black & White) similar to that pasted on the application form.

b. Rs. 50.00 as Fee for duplicate admit card.

c. The application form number.

d. Proof of having submitted the application form.

Iv. A plea that the candidate failed to receive the information for appearing at the Common Examination will

not be accepted as a ground for the refund of fee or any other redressal. The Admission Committee may

withdraw the permission to appear in Common Entrance Examination granted by mistake to a candidate

who is not eligible to appear at the Common Entrance Examination even though an Admit Card has been

issued and produced by the candidate before the concerned Center Superintendent at the center.

9. MEDIUM AND MODE OF EXAMINATION

The candidates appearing in the Common Entrance Examination have to answer the papers in English

or Hindi. In all cases the Standard English numbers must be used. All question papers will carry objective

multiple choice questions.

10 EVALUATION AND DECLARATION OF RESULT.

i. The results of Common Entrance Examination will be declared on website : specialtest.in/compei2011

and on member institutions website.

ii. Separate merit lists on the basis of performance of candidates in Common Entrance Examination will

be prepared for B. Tech. /B.Pharma/B.FAD/MBA/MCA courses.

iii. In case two or more candidates secure equal marks, inter – se- merit of such candidates shall be

determined.

iv. The Admission Committee reserves right to impose a certain cut – off percentage of marks (to be

decided at the time of declaration of result) about passing in exam. All successful candidates will be

called for counseling by giving intimation through website : specialtest.in/compei2011 and by post

but delay on part of Post Office will not be owned.

13

11. DOMICILE REQUIREMENTS

Candidates, who have passed the qualifying examination from an institution/ University located

outside the State of Uttar Pradesh and who are eligible for admission to any course are required to produce

Domicile Certificate at the time of admission on certificate no- 01.

12. MEDICAL STANDARDS

i. Candidates called for counseling will have to submit an undertaking for Medical fitness on certificate no.-02

ii. The candidates will have to submit Medical certificate on profarma given as per certificate no.- 3 at the

time of admission in the Institute.

13. COUNSELLING

i. ON-CAMPUS COUNSELLING There will be counseling of the successful candidates at counseling

center on a scheduled date. The counseling schedule will also be available on

website : specialtest.in/compei2011.

ii. The allotment of the seat/branch will be made during the ON CAMPUS counseling on the basis of

candidate’s merit position in Common Entrance Examination.

iii. Candidates submitting the downloaded form shall submit Demand Draft of Rs. 600/- (Rupees 600) A

counseling letter will be sent through post to the successful candidates. Any delay on part of Post office

is not the responsibility of the AIMA/COMPEI Institute/Admission Committee. Candidate can

download counseling letter from the website : specialtest.in/compei2011

iv. The candidates called for the counseling will be required to come with original certificates of

qualifying examination/marksheet, certificates etc. with one attested copy of each.

v. Verification of Original documents would be done at the time of counseling at the counseling center.

The candidates will not be considered for admission if he does not show the original documents at

counseling center. However the originals will be returned to candidates after the counseling.

vi. The initial fee of Rs. 5000/- will be deposited at the time of counseling in the form of Bank draft drawn

in favour of Consortium of Minority Professional Educational Institutions payable at Lucknow.

However, this initial fee is adjustable against total fee payable at Institution if candidate takes

admission.

vii. The initial fee deposit of Rs. 5000/- will be forfeited if the candidate does not take the admission in the

concerning Institute after allotment of seat / branch. Requests for return of this fee in such case will not

be entertained.

viii. The latest instructions of AICTE / GBTU /MTU and Govt. of UP regarding admissions shall be

applicable.

14

14. TUITION FEE

As per decision of the Management of concerning Institute.

15. SYLLABUS COMPEI-CEE-2011

Syllabus for each question paper for the Common Entrance Examination is given under Appendix ..A..

Appendix - A

SYLLABI FOR COMPEI-CEE– 2011

15

PAPER – 1 (PHYSICS, CHEMISTRY & Mathematics)

PHYSICSMeasurement: Dimensional analysis and error estimation, dimensional compatibility and significant

figures.

Motion in one dimension: Average velocity, instantaneous velocity, one dimensional motion with constant

accelerations, freely falling bodies.

Laws of motion: Force and inertia, Newton’s laws of motion, and their significance

Motion in two dimensions: Projectile motion, uniform circular motion, tangential and radial acceleration in

curve-linear motion, relative motion and relative acceleration.

Work, power & energy : Work done by a constant and variable forces, kinetic and potential energy, power,

Conservative and non conservative forces, conservation of energy, gravitational energy, work energy

theorem, potential energy store in a spring.

Linear Momentum And Collisions: Linear momentum and impulse, conservation of linear momentum for

two particle system, collision, collision in one dimension, collision in two dimension, rocket propulsion.

Rotation of rigid body about a fixed axis: Angular velocity and angular acceleration, rotational

kinematics, rotational motion with constant angular acceleration relationship between angular and linear

quantities, rotational energy, moment of a inertia for a ring, rod, spherical shell, sphere and plane lamina,

torque and angular acceleration, work and energy in rotational motion, rolling motion of a solid sphere and

cylinder.

Gravitation: Gravitational field, Kepler’s laws and motion of planets, planetary and satellite motion,

geostationary satellite.

Oscillatory motion: Harmonic motion, oscillatory motion of mass attached to a spring, kinetic and potential

energy, Time period of a simple pendulum, comparing simple and harmonic motion with uniform circular

motion, forced oscillations, damped oscillations and resonance.

Mechanics of solids and fluids: States of matter young’s modulus, bulk modulus, shear modulus of rigidity,

variations of pressure with depth, Buoyant forces and Archimedes principles, Pascal’s Law Bernoulli’s

theorem and its application, surface energy, surface tension, angle of contact, capillary rise, coefficient of

viscosity, viscous force, terminal velocity, stoke’s law, stream line motion, Reynold’s numbers.

Heat and thermodynamics: First law of thermodynamics, specific heat of an ideal gas at constant volume

and constant pressure, relation between them, , thermodynamics process (reversible, irreversible,

isothermal, adiabatic), second law of thermodynamics, concept of entropy and concept of absolute scale,

efficiency of a carnot engine, thermal conductivity, newton;s law of cooling, black body radiation, wien’s

displacement law, stefan’s law.

Wave : Wave motion, phase, amplitude and velocity of wave, newton’s formula for a longitudinal waves,

propagation of sound waves in air, effect of a temperature and pressure on a velocity of sound, Laplace’s

correction, principle of superposition, formation of standing waves, standing waves in strings and pipes,

beats , doppler’s effect.

Electrostatics: Coulomb’s law, electric field and potential due to point charge, dipole and its field along the

axis and perpendicular to axis, electric flux, Gauss’s theorem and its application to find the field due to

infinite sheet of charge, and inside the hallow conducting sphere, capacitance, parallel plate capacitor with

air and dielectric medium between the plates, series and parallel combination of capacitors, energy of a

capacitor, displacement currents.

Current Electricity: Concept of free and bound electrons, drift velocity and mobility, electric current,

Ohm’s law , resistivety, conductivity, temperature dependency of resistance, resistance in series and parallel

combination, kirchoff’s law and their application to network of resistances , principle of potentiometer,

effect of temperature on resistance and its application.

Magnetic Effect of Current: Magnetic field due to current, Biot-Savart’s law, magnetic field due to

solenoid, motion of charge in a magnetic field, force on a current carrying conductors and torque on current

loop in a magnetic field, magnetic flux, forces between two parallel current carrying conductors, moving coil

galvanometers and its conversion into ammeter and voltmeter.

Magnetism in Matter: The magnetization of substance due to orbital and spin motions of electrons,

magnetic moment of atoms, diamagnetism, paramagretism, ferromagnetism, earth’s magnetic field and its

components and their measurement.

Electromagnetic induction: Induced e.m.f. Faraday’s laws, Lenz’s law, electromagnetic induction, self and

mutual induction B-H curve, hysisteresisloss and its importance, eddy currents.

Ray optics and optical instruments: Source of light, luminous intensity, luminous flux, illuminarce,

photometry, wave nature of light, huygen’s theory for propagation of light and rectilinear propagation of

light, reflection of light , total internal reflection, reflection and refraction at spherical surfaces, focal length

of a combination of lenses, spherical and chromatic aberration and their removal, refraction and dispersion

of light due to a prism, simple and compound microscope, reflecting and refracting telescope, magnifying

power and resolving power.

Wave Optics: Coherent and incoherent sources of light, interference, young’s double slit experiment

diffraction due to a single slit, linearly polarized light, polaroid.

Modern Physics: Photo electric equation, matter wave, quantization, Planck’s hypothesis, Bohr’s model of

hydrogen atom and its spectra, ionisution potential, Rydberg constant, solar spectrum and fraunhofer lines,

fluorescence and phosphorescence, x-rays and their productions, characteristics and continuous spectra.

Nuclear instability, radioactive decay laws , emission of a, ß , r rays, mass-defect, mass energy

equivalence, nuclear fission nuclear reactors, nuclear fusion.

Classifications of a conductors, insulators and semi conductors, on the basis of energy bands in solids, PN

junction, PN diode, junction, transistors, transistors as an amplifier and oscillator.

Principles of a logic gates (AND, OR and NOT) Analog vs digital communication, difference between a

radio and television, signal propagation, principles of LESER and MASER, population inversion,

spontaneous and stimulated emission.

CHEMISTRYAtomic Structure: Bohr’s Concept, Quantum numbers, Electronics configuration, molecular orbital theory

for homonuclear molecules, pauli’s exclusion principle.

Chemical Bonding: Electrovalency, co-valency, hybridization involving s,p and d orbitals hydrogen

bonding.

Redox Reactions: Oxidation number, oxidising and reducing agents, balancing of equations

Chemical Equilibrium And Kinetics: Equilibrium constant (for gaseous system only) le chaterlier’s

principle, ionic equilibrium, ostwald’s dilution law, hydrolysis , ph and buffer solution, solubility product,

common-ion effect, rate constant and first order reaction.

16

Acid-Base Concepts: Bronsted Lowry & Lewis.

Electrochemistry: Electrode potential and electro chemical series,

Catalysis: Types and applications.

Colloids: Types and preparation, brownian movement, tyndall effect, coagulation and peptization.

Colligative Properties Of Solution: Lowering of vapour pressure, osmoti pressure, depression of freezing

point, elevation of boiling point, determination of molecular weight.

Periodictable: classification of elements on the basis of electronic configuration, properties of s,p and d

block elements, ionization potential, electronegativity & and electron affinity.

PreparationAnd Properties Of The Following: Hydrogen peroxide, copper sulphate, silver nitrate, plaster

of paris, borax, mohr’s salt, alums, white and red lead, microcosmic salt and bleaching powder, sodium

thiosulphate.

Thermochemistry: Exothermic & endothermic reactions heat of reaction, heat of combustion & formation,

neutralisation, hess’s law.

General Organic Chemistry: Shape of organic compounds, inductive effect, mesomeric effect,

electrophiles & nucleophiles, reaction intermediates, carboniumion, carbanions & free radical, types of

organic reactions, cannizzaro friedel craft, perkin, aldol condensation.

Isomerism: Structural Geometrical & Optical.

IUPAC: Nomenclature of simple organic compounds

Polymers:Addition & condensation polymers

Carbohydrates: Monosaccharides

PreparationAnd Properties Of The Following: Hydrocarbons, monohydric alcohols, aldehydes, ketones,

monocarboxylic acids, primary amines, benzene, nitrobenzene, aniline, phenol, benzaldehyde, benzoic acid,

Grignard Reagent.

Solid State: Structure of simple ionic compounds, Crystal imperfections (point defects only), Born-Haber

cycle.

Petroleum: Important industrial fractions, cracking, octane number, anti knocking compounds.

MATHEMATICSAlgebra: Sets relations & functions, De-morgan’s Law, Mapping Inverse relations, Equivalence relations,

Peano’s axioms, Definition of rationals and integers through equivalence relation, Indices and surds,

Solutions of simultaneous and quadratic equations, A.P., G.P. and H.P., Special sums i.e. ? n2 and ? n3 ( n?

N), Partial fraction, Binomial theorem for any index, Exponential series, logarithm and logarithmic series.

Determinants and their use in solving simultaneous linear equations, Matrices, algebra of matrices , Inverse

of amatrix, Use of matrix for solving equations.

17

Probability: Definition, Dependent and independent events, Numerical problem on addition and

multiplication, Theorem of probability.

Trigonometry: Identities, Trigonometric equations, Properties of triangles, Solutions of triangles, heights

and distances, Inverse function, complex numbers and their properties, Cube roots of unity,

De-moivre’s theorem.

Co-Ordinate Geometry: Pair of straight lines, Circles, general equation of second degree, Parabola, Ellipse

and hyperbola, tracing of conics.

Calculus: Limits and continuity of functions, Differentiation of function of function, Tangents & normal,

simple examples of maxima and minima, Indeterminate forms, integration of function by parts, by

substitution and by partial fraction, Definite integral, application to volumes and surface of frustums

ZOOLOGYOrigin Of Life: Oparin;s theory, miller’s experiment, viruses-structure, properties, distribution

classification and pathogenesis (eg.AIDS, CANCER), viroids & prions, biotic balance.

Organic Evolution: Relationship among organisms and evidences of organic evolution-principles of

evolution-lamarkism, darwinism and speciation.

MechanismOfOrganicEvolution:Variations-Definition, causes and types, mutations (principles of hugo

de’veries), role of mutations in speciation, evolution through ages and human evolution.

Human Genetics & Eugenics: Human Hereditary Traits, Study Of Twins, A.B.O. blood groups and their

inheritance, Rh-Factor, sex determination, Chromosomal Aberrations, Important Human Syndromes, Sex

Linked CharactersAnd Their Inheritance,Applied Genetics-Eugenics, Euthenics, Euphenics & I.Q. Test.

Applied Biology: Wild life of India-Endangered species: Biospheres Reserves, National Parks and

sanctuaries, Project Tiger, Conservation of wild life, Bio-energy, Poultry, Fisheries (edible fishes), Human

Population, Population explosion, problems & control, Test-Tube babies, Amniocentasis , Application of

Biotechnology in human welfare, HumanAging.

Mammalian Anatomy (Eg. Rabbit): Reproductive system (excluding embryonic developments)

Osteology, structure and organization of different systems.

AnimalPhysiology:

(A) Animal Nutrition: Food, Balanced diet, Nutritional imbalances and deficiency diseases,

Digestion,Absorption,Assimilation of food, (comparison between human and Rabbit).

(B) Animal Excretion And Osmoregulation: Chemical Nature of Excretory Products in

Various Animals, Physiology of Excretion, Function of Liver & Kidney (Homeostatic

regulatory Functions of Kidneys)Formation of Urine , Osmoregulation by Kidneys.

(C) Respiratory System:Exchange and Transport of Gases (O2And Co2) FactorsAffecting O2

and Co2 Transport, Cellular Respiration, Different Lung Volumes, Breathing & Sound

Production.

(D) Nervous Systems: Central, Autonomic and Peripheral Nervous System, Receptors,

Effectors, Reflex-Action, Nature and Conduction of Nerve-Impulses, Synapse, Sense-

Organs-Structure & Working of Eys & Ear , Biochemistry of Vision & Taste Buds.

(E) Endocrine System: Different Endocrine Glands and Hormones-Definition, Types,

Characteristic and their Functions, (In Relation to Human Beings) Hormonal Disorders and

Pheromones.

(F) Circulatory System:Circulation of Body Fluids-Blood & Lymph, Open & Closed Vascular

Systems, Structure & Working Physiology of Heart, Comparison Between Arteries & Veins,

Lymphatic System.

18

of sphere, Cone and cylinder, Differential equations of first order and of first degree.

Vectors: Algebra of vectors, scalar and vector products of two and three vectors and their applications

Dynamics: Velocity, composition of velocity, relative velocity, acceleration, composition of acceleration,

motion under gravity, Projectiles, Laws of motion, principles of conservation of momentum and energy,

direct impact of smooth bodies.

Statics: Composition of coplanar, concurrent and parallel forces moments and couples resultant of set of

coplanar forces and condition of equilibrium, determination of centroid in simple cases, problems

involving friction.

(G) Animal Diversity: Classification of Animal Kingdom (Based on Storar & Eusinger),

Characteristic Feature of Different Phyla and Classes With Examples.

Detailed Studies of The Following:

(A) Protozoa

i. Amoeba-Habit & Habitat, Structure, Locomotion , Reproduction, Osmoregulation,

Parastic Amoebae-Entamoeba Histolytica and Entamoeba Gengivalis, Structure,

Diseases Caused by Them and Their Control,measures.

ii. Plasmodium Vivax-Life-Cycle, Malaria Therapy and Control.

iii. Protozoan & Diseases

(B) Porifera : A Simple Sponge (Leucosolenia); Detailed Study of Structure & Physiology,

Sponge Industry.

(C) Coelenterata : Hydra-Habit & Habitat, Morphology, Tissue Differentiation in Relation to

Physiological Division of Labour And Regeneration.

(D) Aschelminthes: Ascaris – Morphology, Life-Cycle, Therapy and Control.

(E) Annelida: Pheretima Posthuma – Bionomics and Economic Importance.

(F) Arthropoda: (Periplanata): Structure – External and Internal

Comparison Between Periplananta and Blatta.

(i) Housefly & Mosquito : Structure and Life – Cycle

(Ii) Economic Importance of Insets & Their Control.

BOTANY

Plant Cell: Structure & Functions Electron Microscopic Structured Mitochondria, Plastids Centrosomes.

Lysosomes, Microsomes, Endoplasmic Reticulum, Nucleus, Golgibodes, D.N.A. & R. N. A. Cytoplasm,

Membranes and Cell Wall.

Protoplasm: Structure, Components Physical and Chemical Properties.

Cell division (Formation)- free cell formation, Amitosis & Meosis, Duplication of (Prof. Mohd Husain)

DirectorN.A.

Ecology: Ecological Factors (Atmospheric, Edaphic, Climatic, Geological & Biotic Factors).

Ecosystem: Structure, Components of Ecosystem Eg. Water Soluble Minerals and Gases, Producers

Consumers, Decomposers, Pond and Forest Ecosystem.

Atmospheric pollution-causes and control, Types of pollution-Detergents, chemicals automobile exhaust,

Radioactive matter, Smog, sound, Pesticides.

Genetics: Mendalism, Mendals Experiment and Law of Inheritance.

Modern Classification of Plant Kingdom – (According to Ostwald & Tippo) (Outline).

Seeds In Angiospermic Plants: Descripition of Development of Angiospermic Plants (Life History of

Angiospermic Plants).

Fruiti: Dispersal of Fruits and Seeds.

Cell Differentiation Plant Tissue: Meristimatic Classification of Meritimatic & Permanent Tissue and

Functions and Classification of Tissue System.

ANATOMY OF Rooot, Stem And Leaf Difference Between Dicot and Monocot Stem. Secondary Growth

of Stem and Root. Anatomy of Hydrophytes, Xerophytes & Mesophytes.

19

IMPORTANT PHYLUMS:

Algae: Habitat, general characters & uses, description of ulothrix & spirogyra. Bacteria: structure – types of

nutrition. reproduction and economic importance.

Fungi: structure description of Rhizopus and yeast and their economic importance, Fermentation.

Broyophyta: structure and economic importance, description of funaria (Moss).

Pteridopyyta: general structures of pteridophytes description of tern (Droypteris).

General study of gymnosperms and life history of cycas.

classification of angiospermn.

Description of families – identification and economic importance.

Curciferae, Malvaceae, Leguminosae, compositeae, cucurbitaceae.

Soil:

Absorption of water through root hairs osomosis, Translocation and Root pressure Nitrogen cycle.

Special modes of nutrition in plants (Autotrophic, heterotrophic, Parasites, saprophytes, Symbionts

insectivorous and their ecological relation.

Photosynthesis: Chloroplast, light, chlorophyll and Carbon dioxide, Mechanism of photosynthesis

formation of A.T.P. and their functions and importance of photosynthesis.

Transpiration: factors and importance, Mechanism of opening and closing of stomata.

Respiration: aerobic, anaerobic respiration, mechanism of respiration (Glycolysis, Kerb’s cycle, E.T.S.)

Growth & movement: definition of growth, Region of growth & their measurements, types of movements

in plants, Growth harmone.

(A) Reasoning & Logical Deduction :

Geometrical designs & Identification

Selection of related letters/words/numbers/figures

Identification of odd thing/item out from a group

Completion of numberical series based on the pattern/logic

Fill in the blanks of the series based on the numerical pattern and logic of the series

Syllogisms (logic based questions), Identification of logic & selection of correct answers based on the logic

(B) Numerical Ability & Scientific Aptitude :

Airthmetical questions up to 10th standard

Calculation of fraction, percentages, square roots etc.

Profit & Loss and Interest calculations

Data/Table analysis, Graph & Bar Diagram and Pie Chart analysis

Questions related to common use of science (Physics & Chemistry)

Health & Nurtition

(C) General Knowledge :

Current Affairs/Events (Political, Social, Cultural & Economics), Historical events

Geography including Tourist Places/Spots, Current affairs relating to Business & Trade

Countries & Currencies, Latest Who’s Who?, Sports & Games

(D) English Language:

Word Meanings, Antonyms & Synonyms, Meaning of Phrases & Idioms

Fill in the blanks, Complete/Inprovement of the sentences with correct use of Pronouns,

Verbs, Adverbs & Adjective, Reading comprehension followed

20

PAPER – 3 (APTITUDE TEST FOR B.FAD)

The test is aimed at evaluating the verbal ability, quantitative aptitude, logical & abstract reasoning and

knowledge of current affairs. The following is a brief description of contents of the test paper.

Section A (English Language): Grammar, vocabulary, uncommon words, sentence completion, synonyms,

antonyms, relationship between words & phrases and comprehension of passages.

Section B (Numerical Aptitude): Numerical calculation, arithmetic, simple algebra, geometry and

trigonometry, Interpretation of graphs, charts and tables.

Section C (Thinking and Decision Making): Creative thinking, unfamiliar relationships, verbal reasoning,

finding patternstrends and Assessment of figures & diagrams.

Section D (General Awareness): Knowledge of current affairs and other issues related to trade, industry,

economy, sports, culture and science.

(i) MATHEMATICS

Modern Algebra: Idempotent law, identities, complementary laws, Demorgan’s theorem, mapping, inverse

relation, equivalence relation, Piano’s Axiom, definition of rational numbers and integers through

equivalence relation.

Algebra: Surds, solution of simultaneous and quadratic, equations, arithmetic, geometric and harmonic

progression, Binomial theorem for any index, logarithms, exponential and logarithmic series, determinants.

Probability: Definition, dependent and independent events, numerical problems on addition and

multiplication of probability, theorems of probability.

Trigonometry: Simple identities, trigonometric equations, properties of triangles, use of mathematical

tables, solution of triangles, height and distance, inverse functions, DeMoiver’s theorem.

Co-Ordinate Geometry: Co-ordinate geometry of the straight lines, pair of straight lines, circle, parabola,

ellipse and hyperbola and their properties.

Calculus: Differentiation of function of functions, tangents and normal, simple examples of maxima of

minima, limits of function, integration of function (by parts, by substitution and by partial fraction), definite

integral (application to volumes and surfaces of frustums of sphere, cone and cylinder).

Vectors: Position vector, addition and subtraction of vectors, scalar and vector products and their applications.

Dynamics: Velocity, composition of velocity, relative velocity, acceleration, composition of acceleration,

motion under gravity, projectiles, laws of motions, principles of conservation of momentum and energy,

direct impact of smooth bodies, pulleys.

Statics: Composition of co-planar,concurrent and parallel forces, moments and couples, resultant of set of

coplanar forces and conditions of equilibrium, determination of Centroides in simple case, problems

involving friction.

(ii) STASTISTICS

Theory of portability, Mean, Median, Mode, Dispersion and Standard Deviation.

(iii) LOIGICAL ABILITY

Questions to test analytical and reasoning capability of candidates.

21

PAPER – 4 (APTITUDE TEST FOR MBA)

PAPER – 5 (APTITUDE TEST FOR MCA)

CERTIFICATE – 1

DOMICILE CERTIFICATE

(To be issued by Competent Authority of the Distt.)

Certified that Sri./Kum……………………S/o.D/o……...………………….…………

generally reside in village/town.……………. Tehsil………..……… Distt………………... of

Uttar Pradesh. Parents of Sri………………………………… do reside on the above address.

Date:…………………….. * Signature

Full Name………………………

Designation……………………

* Certificates issued by Disstt. Magistrate/ Addl. Disstt. Magistrate/ Sub Divisional Magistrate of the

District will be acceptable issued under G.O. no 157/3-2003-77 (11) /83 dated 18.02.2003

CERTIFICATE – 2

UNDERTAKING BY CANDIDATE FOR MEDICAL FITNESS

in the courses in which I am seeking admission. If at stage it is found that I have a physical

handicap/disability which would hinder the pursuit of studies in the courses in which I am seeking admission

then my admission will be liable to be cancelled. I will produce medical fitness certificate from a

C.M.O./C.M.S. at the time of my joining the institution allotted by COMPEI - CEE-2011 counseling.

Dated: Counter Signed by Signature of the Candidate

Father/ Guardian

II certify that I have no such physical handicap/disability which would hinder the pursuit of studies

22

CERTIFICATE – 3

L.T. M.I.

Height Weight Chest Abdomen

This certificate has to be submitted at the time of admission to the college allotted.

*FORMAT FOR MEDICAL CERTIFICATE

(To be obtained from a Chief Medical officer or Medical Officer of a participating U.P.State Funded Engg. Institute)

Signature of the Candidate Signature of the issuing Medical Officer (with official stamp)

23

CERTIFICATE – 4

CHARACTER CERTIFICATE FROM

THE HEAD OF THE INSTITUTION LAST ATTENDED

This is certify that Sri./Kum…………….…….…….............S/o.D/o……………………

has been bonafide student of …………….....................… from …………………………….

to................................and has passes / appeared at the ……………………………………..

examination in the year …………………… Proctorial reports:

1. Has he/ she involved himself/ herself if any act of indiscipline? Yes/No

2. Has he/ she been warned, Fined or punished for any act of indiscipline? Yes/No

3. Has he/ she been restricted or expelled from Hostel of College Yes/No

for any reason?

4. Has he/ she been involved in any act of indisiple outside the Yes/No

College campus like group clashes or fraction fights etc.

5. Has he/ she been addicted to drugs or intoxicants? Yes/No

*General remarks (Please state your assessment of the student)

Date:…………………….. Signature………………………………….

Full Name………...………………………

Designation…………………………….…

24

CONSORTIUM OF MINORITY PROFESSIONAL EDUCATIONAL INSTITUTIONSCOMMON ENTRANCE EXAMINATION (COMPEI-CEE-2011)

Application form for Admission of Minorities toB.Tech / B.Pharm / B.FAD / MCA / MBA

Application Form No.

Paste RecentColoured

Photographsize

3.5x4.5 cm

1. Name of the candidate (as in High School or Equivalent)

3. Father's Occupation

2. Father's /Husband's Name

4. Address (Mailing in capital letters)

5. Phone No. with STD Code

Mob.

6. E-mail

7. Date of Birth

8. Nationality INDIAN NRI OTHERS

9. Gender MALE FEMALE

10. Religion

11. Categories GENERAL OBC OTHERS

12. Qualifying Examinations Intermediate

B.A./B.Sc./B.Com/Other

Passed

Appeared

13. Name of Qualifying Examination Board/University Year of Passing Div. % marks

14. Subject in Qualifying Examination

Physics

Biology

English

Others

Chemistry

Commerce

Hindi

Mathematics

Computer Science

Urdu

15. Physically Handicapped Yes No

16. Course Applied B.Tech B.Pharm B.FAD MBA MCA

17. Branch Code (in case of B.Tech)

19. Receipt/DD No., Date and Bank

DECLARATION

I certify that the particulars given by me in this Application Form are true to the best of my

knowledge and belief and any mistake/misinformation found at any stage will result in the cancellation of

admission. I have carefully read the Information Brochure of COMPEI-CEE and agree to abide by the

terms and conditions laid therein. Further, it is entirely my responsibility to prove the eligibility for

admission to the course applied for in respect of qualification and entitlement & also for any reserved

category, if claimed, to the entire satisfaction of the examining body.

Date Counter signed by Parent/Guardian Signature of Candidate

COMMENTS OF REGISTERING OFFICER(FOR OFFICE USE ONLY)

CHECKED BYOFFICER

SIGNATURE

18. Centre Choice (Please specify centre code in order of preference see annexure 1 for centre code)

1. 2. 3.