Follow-up of the 11T 1in1 assembly FE analysis · ANSYS Release Build 19.1 PLOT NO. NODAL SOLUTION...
Transcript of Follow-up of the 11T 1in1 assembly FE analysis · ANSYS Release Build 19.1 PLOT NO. NODAL SOLUTION...
logoarea
Follow-up of the 11T 1in1 assembly FE analysis
Emma Gautheron, Susana Izquierdo Bermudez
24-07-2019
1
11T Model vs Serie 300um excess
- With 300um excess, with collar_bt, without the ‘assembly’ step -
- With collaring forces (8.8MN for model/24.35MN for serie) giving 150um clearance -
2
Different collaring tools
Model Serie
3
Collaring
Model Serie
4
Keying
Model Serie
5
Welding
Model Serie
6
Cool Down
Model Serie
7
@Nominal
Model Serie
8
@Ultimate
Model Serie
9
Model – Azimuthal Stresses at the Midplane
10
Focus on the powering
11
Model – Nominal vs Ultimate: Seqv
@Nominal @Ultimate
12
Model – Nominal vs Ultimate: Uazim
@Nominal @Ultimate
13
Model – Nominal vs Ultimate: Contact gap
@Nominal @Ultimate
14
11T Model PoweringExcess 100um, 200um, 300um
- With with collar_bt, without the ‘assembly’ step -
- With collaring forces giving 150um clearance -
15
Model – Nominal vs Ultimate: 100um
@Nominal @Ultimate
16
Model – Nominal vs Ultimate: 200um
@Nominal @Ultimate
17
Model – Nominal vs Ultimate: 300um
@Nominal @Ultimate
18