FOLGER ADAM - Southern Folger
Click here to load reader
Transcript of FOLGER ADAM - Southern Folger
FOLGER ADAM PRODUCT CATALOG
4634 S. Presa Street, San Antonio, TX 78223Phone 210-533-1231 • Fax 210-533-2211
www.SouthernFolger.comSee who we are. See all we do.
FA Rev. 02-10 1
For more information, please call 210.533.1231.
Electric Locks ................................................................................................................................................................................................................... A3
Pneumatic Locks ............................................................................................................................................................................................................. B3
Mechanical Locks ........................................................................................................................................................................................................... C3
Locking Devices/Door Operators ............................................................................................................................................................................... D3
FOLGER ADAM TABLE OF CONTENTS
TABLE OF CONTENTS
RECOMMENDED APPLICATION GUIDELINES
ELECTRIC LOCKS
Introduction to Electric Locks ...................................................................................................................................................................................... A1
Guide and Section Index .............................................................................................................................................................................................. A2
51E Deadlatch ........................................................................................................................................................................................................... A5-A6
51M Deadlatch .......................................................................................................................................................................................................... A7-A8
50HBM Deadlatch .................................................................................................................................................................................................. A9-A10
How to Specify 50HBM Locks ................................................................................................................................................................................... A11
120E Deadlatch ..................................................................................................................................................................................................... A13-A14
120M Deadlatch .................................................................................................................................................................................................... A15-A16
120MC Half-Cycle Deadlatch ............................................................................................................................................................................. A17-A18
120ED Deadbolt ................................................................................................................................................................................................... A19-A20
120RUP Deadlatch .............................................................................................................................................................................................. A21-A22
How to Specify 120 Locks ................................................................................................................................................................................. A23-A24
NS400E Solenoid-Operated Deadlatches ..................................................................................................................................................... A25-A26
NS400M and 400MC Motor-Operated Deadlatches ................................................................................................................................. A27-A28
NS400MCD Motor-Operated Deadbolts ....................................................................................................................................................... A29-A30
How to Specify NS400 Locks ........................................................................................................................................................................... A31-A32
800 Gate Locks .................................................................................................................................................................................................... A33-A34
D9300 Electric Maxi-Mortise™ .......................................................................................................................................................................... A35-A40
2 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM TABLE OF CONTENTS
TABLE OF CONTENTS
MECHANICAL LOCKS
Introduction to Pneumatic Locks ............................................................................................................................................................................... B1
Guide and Section Index .............................................................................................................................................................................................. B2
NS400P Pneumatic Deadlatch .............................................................................................................................................................................. B5-B6
120P Deadlatch ......................................................................................................................................................................................................... B7-B8
51P Deadlatch ......................................................................................................................................................................................................... B9-B10
Introduction to Mechanical Locks .............................................................................................................................................................................. C1
Guide and Section Index ............................................................................................................................................................................................. C2
10 Deadlock .............................................................................................................................................................................................................. C5-C6
80 Deadlock ............................................................................................................................................................................................................. C 7-C8
FGM-80 Fence Gate Lock/Mounting ................................................................................................................................................................ C9-C10
30/30D Locks ....................................................................................................................................................................................................... C11-C12
70 Deadlatch ......................................................................................................................................................................................................... C13-C14
60/60K Latch and Key Operated Deadlocks ................................................................................................................................................. C15-C16
15 Latch ........................................................................................................................................................................................................................... C17
17 Latch ........................................................................................................................................................................................................................... C19
17-M Latch ..................................................................................................................................................................................................................... C20
Lock Mountings .................................................................................................................................................................................................. C21-C22
3600 and 3800 Cremone Bolts ...................................................................................................................................................................... C23-C25
Keeper Switches .......................................................................................................................................................................................................... C27
D9300 Maxi-Mortise™ ........................................................................................................................................................................................ C29-C36
A9300 Maxi-Mortise™ ......................................................................................................................................................................................... C37-C44
9300 Lock Conversion Chart .................................................................................................................................................................................... C45
D9300/A9300 Handing Chart ................................................................................................................................................................................... C46
PNEUMATIC LOCKS
FA Rev. 02-10 3
For more information, please call 210.533.1231.
FOLGER ADAM TABLE OF CONTENTS
TABLE OF CONTENTS
Introduction to Accessories .......................................................................................................................................................................................... E1
Guide and Section Index .............................................................................................................................................................................................. E2
Escutcheon and Cylinder Shield ................................................................................................................................................................................. E3
Door Pulls ......................................................................................................................................................................................................................... E4
Prison Hinges ............................................................................................................................................................................................................. E5-E6
No. 4-1/2FM-ICS Institutional Hinges ....................................................................................................................................................................... E7
No. 4-1/2EH Electric Hinge ........................................................................................................................................................................................... E8
FOLGER ADAM ACCESSORIES
LOCKING DEVICES
Introduction to Locking Devices ................................................................................................................................................................................ D1
Guide and Section Index ............................................................................................................................................................................................. D2
Locking Device/Door Operator Application Guidelines ....................................................................................................................................... D4
Guide to Specification Preparation ............................................................................................................................................................................ D5
102 Track and Hanger Sets ................................................................................................................................................................................... D7-D8
2B.3 Sliding Door Locking Device ..................................................................................................................................................................... D9-D11
3B.2 Sliding Door Locking Device .................................................................................................................................................................. D13-D15
KR.3 Sliding Door Locking Device ................................................................................................................................................................... D17-D19
Mechanical Control Cabinets ........................................................................................................................................................................... D21-D22
D Corridor Door Operator ............................................................................................................................................................................... D23-D24
D2B.3 Corridor Door Operator ....................................................................................................................................................................... D25-D26
D3B.2 Corridor Door Operator ....................................................................................................................................................................... D27-D28
D5B Corridor Door Operator ........................................................................................................................................................................... D29-D30
DKR Corridor Operator ..................................................................................................................................................................................... D31-D32
G Operators ......................................................................................................................................................................................................... D33-D34
J Operators Sliding Fence Gate ....................................................................................................................................................................... D35-D36
continued
4 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM TABLE OF CONTENTS
TABLE OF CONTENTS
Abbreviations and Finishes .......................................................................................................................................................................................... G1
General ...................................................................................................................................................................................................................... G2-G5
GLOSSARY
Safety Mirrors ................................................................................................................................................................................................................ SF1
Clothes Hook/Shelf ...................................................................................................................................................................................................... SF2
Key Cabinet and Door Stop ....................................................................................................................................................................................... SF3
Pistol Lockers ................................................................................................................................................................................................................. SF4
TestPro Test Unit .................................................................................................................................................................................................. SF5-SF6
SOUTHERN FOLGER ACCESSORIES
FOLGER ADAM ACCESSORIES
Head and Foot Bolts ...................................................................................................................................................................................................... E9
523 Concealed Door Position Switch .............................................................................................................................................................. E11-E12
534 Door Position Switch ................................................................................................................................................................................... E13-E14
ASSW-105A Magnetic Switch ..................................................................................................................................................................................... E15
continued from previous page
FA Rev. 02-10 A1
For more information, please call 210.533.1231.
Folger Adam brand electric locks arecharacterized by superior quality anddependability. These locks have beenproven by years of use in prisons, jailsand detention facilities throughout theworld. Each model offers a wide rangeof features to allow customized functionfor specific security requirements.
Qualification ofSecurity Levels___________The security level of a lock or otherhardware item is determined by itsability to endure in the specificenvironment in which it is used, thelevel of supervision within the areawhere it is installed, and a variety ofother factors. The terms minimum,medium and maximum are used todescribe the relative relationship ofproducts to one another.
Each lock on the following pages carriesa level of security designation or range.These designations are Southern FolgerDetention Equipment Company’sevaluation of the ability of the productto withstand the rigors probable in thatparticular security level. Key type,cylinder type, and overall strength andconstruction of the locks have beenconsidered in reaching the publishedlevels. Because of the number ofvariables affecting security level, thedesignations in this catalog should beconsidered as guidelines only.
Keys_____________________
All keys are registered before shipmentto allow prompt, accurate response torequests for additional or replacementkeys. To ensure the security of your
keying system, keys are sold only toproperly authorized buyers. Keys aresold separately and are not included inthe price of the locks.
Prison Keys
Southern Folger’s standard policy doesnot allow master keying lever tumblerlocks. This is done for the protection ofthe end user.
� Lever tumbler locks have a limitednumber of usable keying combinations.Master keying reduces the number ofcombinations to three or four, whichdrastically limits the change keyapplications within a facility.
� Master keying lever tumbler locksrequires the bypass of four of the fivetumblers leaving only one tumbler toresist picking attempts. This wouldmake the remaining usablecombinations easy to pick.
� A master keyed lock is more easilypicked by an inmate/resident.
Keying Security__________Proper use and care of keys helps tomaintain overall security.
� Keys should be handled only by staffpersonnel.
� Keys should be stored in a lockedcabinet, in the charge of an executiveofficer.
� Staff personnel should conceal thebitted end of the key from view ofinmates. Key shields available.
� Keys should never be left in a cylinderor out of reach of the officer.
Doors should be closed and locked afteruse and locks/keepers checkedfrequently for tampering or vandalism.Doors left open for extended periods
should be subject to lock and boltkeeper inspection to eliminateobstructions which may interfere withproper operation.
Templates________________Templates are issued on a job specificbasis only. Southern Folger does notissue registered template books.Templates will be issued upon receipt ofa valid purchase order and hardwareschedule.
Southern Folger reserves the right tomodify template information at any timeand without prior notice. When achange in templates occurs, material willbe shipped in accordance with thetemplates used for each specific job.
Dimensional drawings in this catalog arenot to be used for template information.
Electrical Indication______In systems using custom graphic panelsor electronic monitoring consoles,electrical indication is achieved byadding internal switches to the locks.These switches monitor the condition ofthe lock, indicating its locked orunlocked status. Details on specifyingthese switches are contained on eachproduct page.
IMPORTANT NOTE: When a door is open,the deadlock actuator of the lock may bemanually depressed, giving a falseindication that the door is closed andlocked. To eliminate this false indication, adoor position switch should be installedand wired in series with the indicationswitches of the lock. Then a “secure”indication may be produced only afterthree conditions have been met:
1) Deadlock actuator is depressed.
2) Latchbolt is extended.
3) The door is closed.
FOLGER ADAM ELECTRIC LOCKS
INTRODUCTION
A2 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Deadlatch Lever tumbler Swinging 51E Maximum A5-6
51M Maximum A7-8
Deadlatch Sliding 50HBM Maximum A9-10
How to Specify A1150HBM SeriesLocks
Deadlatch Pin tumbler Swinging 120E Med/Max A13-14(Mogul Cyl.) 120M Med/Max A15-16
120MC Med/Max A17-18
Deadlock Swinging 120ED Med/Max A19-20
Deadlatch Roll-up 120RUP Med/Max A21-22
How to Specify A23-24120 Series Locks
Deadlatch Pin tumbler Swinging NS400E Min/Med A25-26(Builders NS400M/400MC Min/Med A27-28Hardware Cyl.)
Deadlock Swinging NS400MCD Min/Med A29-30
How to Specify A31-32NS400 Series Locks
Fence Gate Locks Lever tumbler Swinging/Sliding 800 Maximum A33-34
Mortise Pin Tumbler Swinging D9300 Min/Med A35-40Deadlatch (Mogul Cyl.)
FOLGER ADAM ELECTRIC LOCKS
ELECTRIC LOCK SELECTIONGUIDE AND SECTION INDEX
LOCKTYPE
CYLINDERTYPE
DOORTYPE
APPLICABLESERIES
SECURITYLEVEL PAGE
The above is a generalized guideline only. To determine specific models required for your application, refer to product pages fordetailed descriptions.
FA Rev. 02-10 A3
For more information, please call 210.533.1231.
FOLGER ADAM ELECTRIC LOCKS
ELECTRIC LOCKAPPLICATION GUIDELINES
IMPORTANT NOTE: The above guidelines are not specific recommendations. The security of a particular door or group of doorsdepends upon not only hardware employed, but also supervision both direct and indirect. For questions on the application of aparticular lock, contact the factory.
BLANK PAGE
FA Rev. 02-10 A5
For more information, please call 210.533.1231.
Description______________Series 51E Deadlatches are levertumbler, solenoid-operated locks forswinging doors. Specify keying asfollows:
52E Five tumbler model, keyed cover side
52E-6 Six tumbler model, keyed cover side
56E Five tumbler model, keyed both sides
56E-6 Six tumbler model, keyed both sides
Applications_____________51E Deadlatches are designed for doorjamb installation and provide maximumsecurity for heavily used cell, corridor orentrance doors. They provide theconvenience of slam-locking withremote, electrical unlocking.
Operations______________Standard (1): When connected to amomentary-contact switch, the latchboltretracts when the solenoid is energized.Once retracted, the latchbolt is heldmechanically retracted until the door isopened. The latchbolt extends when thedoor is open.
Standard (1a): When connected to amaintained-contact switch, the latchboltretracts when the solenoid is energized.Once retracted, it is held electricallyretracted for an extended period oftime. The latchbolt extends only whenthe solenoid is de-energized.
No-notch (2): Latchbolt extends whenthe switch is selected to lock.
Standards Compliance____All 51E Series models are UL Listed asBurglary-Resistant Mechanisms and FireDoor Accessories to a three-hour rating.
ASTM F-1577 Grade 1 – Impact
Standard Features_______� Solenoid voltage – 120VAC
� Two piece plug connector –Simplifies wiring.
� Instant solenoid operation –Dependable, continuous-dutysolenoid.
� Automatic deadlocking – When thelatchbolt is extended, it automaticallydeadlocks on closure.
� Full 3/4" bolt throw – Projects 1/4"when retracted.
� Mechanical unlocking by key – Foruse during power failure, or any timethe lock unlocks by use of prisonparacentric key. Latchbolt remainsretracted until relocked by key.
FOLGER ADAM ELECTRIC LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 51E DEADLATCH
A6 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Indication switch – A lock statusindication switch which monitors theextension of the latch bolt and thedeadlocked condition is included.
� Rugged construction – Case andcover are 7 gauge steel.
� Tumbler Options – Choice of five orsix tumbler models. Six tumblermodel offers greater pick resistance.
� Solid steel latchbolt – Latchbolt iszinc plated steel; concealed pins resistsawing.
� Deadlock actuator – Roller type, zincplated steel, adjustable for variationsin door-to-jamb clearance.
� Finish – Zinc plated.
Optional Features________� Solenoid voltage – 220VAC
� No-notch feature – The holdbacklever has no notch to hold thelatchbolt mechanically retracted. Thelatchbolt extends in the lockedposition regardless of the position ofthe door.
� Interlocking – Accomplished throughthe control console.
Specifications_________� Case and cover – 7 gauge steel.
� Latchbolt – Solid steel with hardened steel roller pins.
� Deadlock actuator – Zinc platedsteel, roller type.
� Lever tumblers – spring temperbrass, activated by heavy phosphor bronze springs.
� Key cylinder – One piece,bronze alloy with paracentrickeyway.
� Bolt size – 2" x 3/4"
� Bolt throw – 3/4"
ElectricalCharacteristics________� Solenoid – Continuous-duty type.
� Ratings – 120VAC, 60HZ, 13amps inrush, .75 amps seated220VAC, 60Hz, 6.5 amps inrush,.38 amps seated.
� Indication switch –SPDT, UL Listed.
� Rating – 15 amps at 125 or 250 VAC.
How to Specify___________
NOTE: The above are standard 5-tumbler models. To specify 6-tumblerunits, add –6 after the basic modelnumber. Example: 56E-6-L.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM ELECTRIC LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum51E DEADLATCH
OPERATION KEYING WITH IND.SWITCH
Standard (1)one side 52EL
two sides 56EL
No-notch (2)one side 52ELNN
two sides 56ELNN
LEGEND
56 LOCKKEYEDBOTHSIDES
52 LOCKKEYEDHINGESIDE
POCKET COVER HINGE SIDE
25 LHRB LATCHBOLT RHRB 26
27 LHRB LATCHBOLT RHRB 28
Specify circled swing number when ordering.
FA Rev. 02-10 A7
For more information, please call 210.533.1231.
Description______________Series 51M Deadlatches are levertumbler, motor operated locks forswinging doors. Specify keying asfollows:
52M Five tumbler model, keyed cover side
52M-6 Six tumbler model, keyed cover side
56M Five tumbler model, keyed both sides
56M-6 Six tumbler model, keyed both sides
Applications_____________These jamb-mounted locks providemaximum security for cell, corridor orentryway doors. They slam lock onclosure and provide staff with the safetyand convenience of remote, electricunlocking. Quiet motor operation is wellsuited to residence areas.
Operations______________When used in conjunction with amomentary contact switch, the unitunlocks when energized. The latchboltretracts, and once retracted, it is heldmechanically retracted until the door isopened. The latchbolt extends when thedoor is open.
Standards Compliance___51M Series Deadlatches are UL Listed asBurglary-Resistant Mechanisms and asFire Door Accessories to a three-hourrating. UL Fire Door rating is notavailable with Model 51MC.
ASTM F 1577 Grade 1 - Impact
Standard Features_______� Motor voltage – 120VAC� Two piece plug connector –
Simplifies wiring.� Quiet operation – Unlocks by
smooth motor action.� Automatic deadlocking – All models
automatically deadlock on closure.� Rugged construction – 7 gauge steel
for durability.� Indication switch – A lock status
indication switch which monitors theextension of the latch bolt and thedead locked condition is included.
� High security – Five or six tumblermodels available. Six tumbler modeloffers greater pick resistance.
� Mechanical unlocking by key – Inthe event of power failure, or at anytime, 51M Series deadlatches may beunlocked by prison paracentric key;latchbolt remains retracted untilrelocked by key.
� Solid steel latchbolt – Zinc plated,with two hardened steel pins to resistsawing.
� Deadlock actuator – Roller type, zincplated steel, adjustable for variationsin door-to-jamb clearance.
� Full 3/4" bolt throw – Projects 1/4"when retracted.
� Finish – Zinc plated.
FOLGER ADAM ELECTRIC LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 51M DEADLATCH
A8 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________� Motor voltage – 24VDC� Continuous-duty function – Using a
two-position, maintained contactswitch, and a two-position cam on themotor, the latchbolt may be heldretracted for extended periods. Thelatchbolt extends only when the dooris open and the motor is energized asecond time. The latchbolt deadlockswhen extended and the door isclosed.
� No-notch feature – The holdbacklever has no notch to hold thelatchbolt mechanically retracted. Thisfeature may be used with ContinuousDuty feature, and operates in thesame manner as above, except thatthe latchbolt extends when the motoris energized a second time regardlessof the position of the door.
� Interlocking – Accomplished throughthe control console.
Specifications_________� Case and cover – 7 gauge steel.
� Latchbolt – Solid steel with hardened steel roller pins.
� Deadlock actuator – Zinc platedsteel, roller-type.
� Lever tumblers – Spring-temperbrass, activated by heavy phosphor-bronze springs.
� Key cylinder – One piece, bronzealloy with paracentric keyway.
� Bolt size – 2" x 3/4"
� Bolt throw – 3/4"
ElectricalCharacteristics________� Motor (AC) – Synchronous-type
with brake.
� Ratings (120VAC) – 60HZ, 1.3 amps full load.
� Ratings (220VAC) – 60HZ, .65 amps full load.
� Motor (DC) – Permanent magnetgearmotor.
� Ratings – 24VDC, 2.2 amps at full load.
� Indication switch – SPDT, ULListed, 15 amps at 125VAC or 250VAC.
How to Specify___________
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM ELECTRIC LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum51M DEADLATCH
OPERATION KEYING W/INDICATIONSWITCHES
W/INDICATION& INT. SWITCHES
Standardone side 52ML 52MLI
two sides 56ML 56MLI
ContinuousDuty
one side 52MCL N/A
two sides 56MCL N/A
WithNo-notch
one side 52MCLNN N/A
two sides 56MCLNN N/A
LEGEND
56 LOCKKEYEDBOTHSIDES
52 LOCKKEYEDHINGESIDE
POCKET COVER HINGE SIDE
25 LHRB LATCHBOLT RHRB 26
27 LHRB LATCHBOLT RHRB 28
Specify circled swing number when ordering.
NOTE: The above are standard 5-tumbler models. To specify6-tumbler units, add -6 after the basic model number.Example: 52M-6-L
FA Rev. 02-10 A9
For more information, please call 210.533.1231.
Description______________Series 50HBM Deadlatches are levertumbler, motor-operated locks forsliding doors, utilizing hookbolts. Specifykeying as follows:
51 Keyed case side52 Keyed cover side56 Keyed both sides
Applications_____________Jamb-mounted 50HBM locks should bespecified for maximum security cell,corridor, sallyport, or entrance/egresssliding doors. May be installed within alock pocket or full height column. Theyare designed to be part of an electricallocking/unlocking system to provideinstitutional staff with maximum safetyand flexibility of operation.
Operations______________All 50HBM locks are operated by electricmotor. The choice of two motoroperations provides a variety offunctions:
Full-Rotation Motor (50HBM) with latchback (1): Unlocks when the motor is energized bya momentary contact switch. Onceunlocked, the hookbolt is heldmechanically in the raised position untilthe door is opened. It then returns tonormal, lowered position.
Two-Position Motor (50HBMC) without latchback (2): Same as above, except that thehookbolt is raised and lowered as themotor runs. A door starter should beinstalled in the track housing to pushthe door open when the motor reachesthe unlocking point.
Testing__________________50HBM locks have been tested for over1,000,000 operations.
Standard Features_______� Motor voltage – 120VAC� External mounting – Locks install
without cover plate removal. Externalslotted mounting holes simplifyinstallation and allow for variations indoor gap by permitting lateralmovement.
� Two-piece plug connector –Simplifies wiring at time of installationand allows pre-wiring at the lockpocket.
� Superior durability – Working partsare stainless steel and designed formaximum strength and corrosionresistance.
� Hardened hookbolt and deadlockactuator – Zinc plated for corrosionresistance.
� Motor operation – A choice of twooperations is available, as shown onfollowing page.
� High security – Choice of five or sixlever tumbler models. Six tumblermodel offers greater pick resistance.
� Mechanical unlocking by key –Once unlocked by key, the hookboltremains in that position until relockedby key (Models without latchbackfeature). Key is removable in theunlocked position.
� Indication switch – The indicationswitch monitors the deadlock lever toindicate a deadlocked hookbolt.
� Finish – Zinc plated.
FOLGER ADAM ELECTRIC LOCKSKey: Prison Paracentric
Door: Sliding
SecurityLevel: Maximum 50HBM DEADLATCH
A10 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________Motor voltage – 24VDC
Lock bolt keepers – Select 50H-4DBwith dust box.
Dimensional Data________Note: Dimensions are for informationand planning purposes only and shouldnot be used as templates.
Specifications_________� Case – 7 and 10 gauge steel.
� Cover – 10 gauge HRS.
� Hookbolt – .5 inch steel, casehardened and zinc plated.
� Deadlock actuator – .5 inchsquare CRS, hardened and zinc plated.
� Deadlock and operator levers –Stainless steel.
� Springs – Stainless steel.
� Motor – Synchronous-typegearmotor with brake.
ElectricalCharacteristics________� Motor (AC) – Synchronous-type
gearmotor with brake.Ratings: 120VAC, 60HZ, 1.3 ampsat full load.
� Motor (DC) – Permanent magnet gearmotor.Ratings: 24VDC, 2.2 amps at fullload.
� Indication switch – SPDT, UL Listed. Deadlock Ratings: 15 amps at 125or 250 VAC.Auxiliary Ratings: 10 amps 125 or 250 VAC.
FOLGER ADAM ELECTRIC LOCKS Key: Prison Paracentric
Door: Sliding
SecurityLevel: Maximum50HBM DEADLATCH
MODEL NO.OPERATION
DESCRIPTION
LATCHBACK OPERATIONSWITCHESINTERLOCK
INDICATIONSWITCH
DEADLOCKWITH WITHOUT
50HBM-1-01 1 X X
50HBMC-1-04 2 X X
LEGEND
50HB Series LocksLOCK COVER PLATE TRACK SIDE
56HBKEYEDBOTHSIDES
52HBKEYEDTRACKSIDE
31 HRHL 23
33 HRHL 34
Specify circled swing number when ordering.
This chart shows applicability of functions and features to specific 50HBM models.For complete details, see How To Specify on the following page.
1 2
3
4 6
5
7KeyingLocation
51HBCase Side
52HBCover Side
56HBBoth Sides
BasicModels
MFull-Rotation
Motor
MCTwo-Position
OperationSeries
1Standard
SwitchFunctions
WithLatchback
01DeadlockIndication
WithoutLatchback
04DeadlockIndication
Handing*
LHLeft Hand
RHRight Hand
LeverTumblers
5Five
6Six
OperatingVoltages
120 VAC
24 VDC
1 2 3 4 5 6 7
56HB M - 1 01 x 5 x LH x 120 VAC
FA Rev. 02-10 A11
For more information, please call 210.533.1231.
FOLGER ADAM ELECTRIC LOCKS
HOW TO SPECIFY50HBM SERIES LOCKS
*For information on handing, see chart on previous page.
BLANK PAGE
FA Rev. 02-10 A13
For more information, please call 210.533.1231.
Description______________Series 120E Deadlatches are pintumbler, solenoid-operated locks forswinging doors. Specify keying asfollows:
121 Keyed case side122 Keyed cover side126 Keyed both sides
Applications_____________Series 120E Deadlatches are suited formedium or maximum securityapplication including cell doors, sallyportor egress doors, corridor or entrancedoors. Sensitive administration areas ofan institution may also warrant 120Series locks. These jamb-mounted locksare designed to be part of an electricalsystem with remote operation andmonitoring to provide supervisorypersonnel with optimum protection andflexibility.
Operation_______________Standard (1): Series 120E locks unlockwhen the solenoid is energized by amomentary-contact switch. Onceunlocked, the latchbolt is heldmechanically retracted until the door isopened. It then extends automatically.
Without latchback (1a) 04 one switch;05 two switches: Once unlocked, thelatchbolt is held retracted as long as thesolenoid is energized. A maintainedcontact switch may be used to keep thelatchbolt retracted for an extendedperiod of time.
Knob release(2): 120E Deadlatchesmay be specified with knob release onone side, where the knob is alwaysactive. Knob may be mounted on thecase side, or the cover side.
Key holdback (3): When unlocked bykey, the deadlatch remains retracteduntil relocked by turning the key in theopposite direction. Available one sideonly. For locks keyed both sides,available cover side only.
Note: Key cylinders for locks with key holdbackfeature must be installed at the factory. Thisfunction is not UL Listed for Fire Doors.
Testing__________________120E Series Deadlatches and Maxi-Mogul® Key Cylinders have been testedto 1,000,000 operations.
Standards Compliance___Series 120E locks are UL Listed asBurglary-Resistant Mechanisms and FireDoor Accessories to a three-hour rating.Maxi-Mogul® Key Cylinders meet UL437requirements.
ASTM F1577 Grade 1 - Impact
Standard Features_______� Solenoid voltage – 120 VAC� Superior durability – Working parts
of stainless steel afford greaterstrength and corrosion-resistance.
� Standard lock size – All models usethe same size case, cover andmounting holes for simplifiedinstallation and frame preparation.
� External two-piece plug connector –All models install without coverremoval. Simple plug-in connection tofield wiring.
� External mounting holes – Easyinstallation eliminates the need forcover removal.
� Standard lock – Mounts behindframe and does not require afaceplate.
� 1" throw latchbolt – Offers greatersecurity. Each bolt is hardened toresist sawing. When latchbolt isengaged in strike, bevel is concealedto prevent picking.
� Mechanical unlocking by key –Specify Folger Adam Mogul cylinders,Maxi-Mogul® high security cylinders orother mogul cylinders.
� Investment-cast stainless steelstrike – Furnished with four tamper-resistant screws.
� Continuous-duty solenoid – Forinstant action.
� Finish – Zinc plated case and cover.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum 120E DEADLATCH
A14 Printed in USA FA Rev. 07-12
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________� Optional solenoid voltage –
230 VAC, 60Hz.� Faceplate – US32D finish.� Indication/auxiliary switches –
An indication switch monitors thedeadlock lever indicating adeadlocked latchbolt. The auxiliaryswitch monitors the roller bolt forextended or retracted position.
� Local electric key (LEK) – A uniquefunction which uses two types of keysfor applications where inmates carrytheir own keys, but supervision isnecessary. One key turns in onedirection only and operates the lockelectrically. The supervisory key turnsin both directions to operate the lockelectrically and mechanically. Theelectric operation may be cancelledfrom a central console or controlpoint at any time via a three-positionswitch. The Maxi-Mogul® Key Cylinder isuniquely suited for this highfrequency operation, shown by cycletest of 1,000,000 operations.LEK not available on any 120E-3Series Locks.
� Key Cylinder Extension – When thelock is keyed on the stop side of thejamb, an extension eliminates theneed for a special, recessed framepocket. Specify E-3 for 3", E-4 for 4"or E-5 for 5".
The chart at right shows applicability of above options to all 120E Models.
For complete details, see How toSpecify in this section.
Specifications_________� Case and cover – 10 gauge steel.
� Latchbolt – Investment-caststainless steel hardened, 1" throw.
� Deadlock lever – Stainless steel, adjustable for door gap variations.
� Bolt opening – Does not allowaccess to mechanism.
� Roller bolt – Investment-caststainless steel with stainless steel roller.
� Operating lever – Stainless steelto operate with solenoid.
� Strike – Investment-cast stainlesssteel, attached with screws in twodirections.
� Solenoid – 120 VAC continuousduty with stainless steel guides;230VAC optional.
� Springs – Stainless steel.
ElectricalCharacteristics________� Solenoid voltages (120 VAC) –
13 amps inrush - .75 amps seated.
� Solenoid voltages (230 VAC) –6.6 amps inrush - .38 amps seated.
� Switches – SPDT, UL Listed, 15 amps @ 125 or 250 VAC.
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum120E DEADLATCH
MODEL NO. OPERATIONLATCHBACK OPERATIONAL
SWITCHESINDICATIONSWITCHES LEK
AVAILABLEWITH W/O HOLDBACK RELOCK INT. DEADLATCH AUX
120E-1-01 Standard (1) X X Yes120E-1-04 Standard (1a) X X Yes120E-1-07 Standard (1b) X X X Yes120E-2-01 Knob Release (2) X X Yes120E-2-04 Knob Release (2a) X X Yes120E-2-07 Knob Release (2b) X X X Yes120E-3-01 Key Holdback (3) X X No120E-3-04 Key Holdback (3a) X X No120E-3-07 Key Holdback (3b) X X X No
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FA Rev. 02-10 A15
For more information, please call 210.533.1231.
Description______________Series 120M Deadlatches are pintumbler, motor-operated electro-mechanical locks for swinging doors.
Specify keying as follows:
121 Keyed case side122 Keyed cover side126 Keyed both sides
Applications_____________Series 120M Deadlatches are jamb-mounted and designed for use inmedium or maximum securityapplications to secure cell doors,sallyports, corridors or entrance doors.The motor provides smooth, quietoperation and positive locking. 120Mlocks are designed to be part of anelectrical system with remote operationand monitoring. They afford flexibilityand safety to institution staff.
Operations______________Standard (1): Series 120M locks unlockwhen the motor is energized by amomentary-contact switch. Onceunlocked, the latchbolt is heldmechanically retracted until the door isopened. It then extends automatically.
Knob release(2): 120M Deadlatchesmay be specified with knob release onone side, where the knob is alwaysactive. Knob may be mounted on thecase side, or the cover side.
Key holdback (3): When unlocked bykey, the deadlatch remains retracteduntil relocked by turning the key in theopposite direction. Available one sideonly. This function is not UL Listed forFire Door Accessories to a three-hourrating.
Note: Key cylinders for locks with key holdbackfeature must be installed at the factory.
Testing__________________120M Series Deadlatches and Maxi-Mogul® Key Cylinders have been testedto 1,000,000 operations.
Standards Compliance___All Series 120M locks are UL Listed asBurglary-Resistant Mechanisms and FireDoor Accessories to a three-hour rating,except Key holdback function, which isnot Fire rated.
Maxi-Mogul® Key Cylinders meet UL437requirements.
ASTM F1577 Grade 1 - Impact
Standard Features_______� Motor voltage – 120 VAC� Superior durability – Working parts
of stainless steel afford greaterstrength and corrosion resistance.
� Standard lock size – All models usethe same size case, cover and
mounting holes for simplifiedinstallation and frame preparation.
� External two-piece plug connector –All models install without coverremoval. Simple plug-in connection tofield wiring.
� External mounting holes – Easyinstallation eliminates the need forcover removal.
� Standard lock – Mounts behindframe and does not require afaceplate.
� 1" throw latchbolt – Offers greatersecurity. Each bolt is hardened toresist sawing. When latchbolt isengaged in strike, bevel is concealedto prevent picking.
� Mechanical unlocking by key –Specify Folger Adam Mogul cylinders,Maxi-Mogul® high security cylinders orother Mogul cylinders.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum 120M DEADLATCH
A16 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Investment-cast stainlesssteel strike – Furnished with fourtamper-resistant screws.
� Fractional HP Motor – Permanentlylubricated for smooth quiet operationwith thermal overload protection anda brake for accurate locking position.
� Finish – Zinc plated case and cover.
Optional Features________� Faceplate – US32D finish.� Indication/auxiliary switches –
An indication switch monitors thedeadlock lever indicating adeadlocked latchbolt. The auxiliaryswitch monitors the latchbolt forextended or retracted position.
� Local electric key (LEK) – A uniquefunction which uses two types of keysfor applications where inmates carrytheir own keys, but supervision isnecessary. One key turns in onedirection only and operates the lockelectrically. The supervisory key turnsin both directions to operate the lockelectrically and mechanically. Theelectric operation may be cancelledfrom a central console or control pointat any time via a three-position switch.The Maxi-Mogul® Key Cylinder isuniquely suited for this highfrequency operation, shown by cycletest of 1,000,000 operations.LEK not available on any 120M-3Series Locks.
� Key Cylinder Extension – When thelock is keyed on the stop side of thejamb, an extension eliminates theneed for a special, recessed framepocket. Specify E-3 for 3", E-4 for 4"or E-5 for 5".
� Optional motor voltage – 24 VAC or24 VDC.
Specifications_________� Case and cover – 10 gauge steel.
� Latchbolt – Investment-cast stainless steel, hardened. 1"throw.
� Deadlock lever – Stainless steel, adjustable for door gapvariations.
� Bolt opening – Does not allowaccess to mechanism.
� Roller bolt – Investment-caststainless steel with stainless steelroller.
� Operating lever – Stainless steelto operate with solenoid.
� Strike – Investment-cast stainlesssteel, attached with screws in twodirections.
� Motor – 120 VAC continuousduty, 24 VAC or 24 VDC optional,synchronous-type gearmotor.
� Springs – Stainless steel.
ElectricalCharacteristics________� AC motors – Synchronous-type
gearmotor with brake.
Ratings: 120 VAC: 60 Hz, 1.3amps at full load.
� DC motors – Permanent-magnetgearmotor.
Ratings: 24 VDC, 2.2 amps at fullload.
� Switch – SPDT, UL Listed, 15 amps @ 125 or 250 VAC.
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum120M DEADLATCH
MODEL NO.OPERATION
DESCRIPTIONLATCHBACK
INDICATION SWITCHES LEKAVAILABLE
DEADLATCH
120M-1-01 Standard (1) X X Yes
120M-2-01 Knob Release (2) X X Yes
120M-3-01 Key Holdback (3) X X No
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
The chart below shows applicability ofabove options to all 120M Models.
For complete details, see How toSpecify in this section.
FA Rev. 02-10 A17
For more information, please call 210.533.1231.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum
Description______________Series 120MC Deadlatches are pintumbler, motor-operated locks utilizing atwo-position motor cam.
Specify keying as follows:
121 Keyed case side122 Keyed cover side126 Keyed both sides
Applications_____________Series 120MC Deadlatches are suitable foruse in medium or maximum securitysituations to lock cell, corridor or entrancedoors. Especially appropriate for areasrequiring the latchbolt to remain retracteduntil it is selected to lock again.
Like all Series 120 locks, the jamb-mounted 120MC Deadlatch is designedfor use as part of an electrical system withremote operation and monitoring.
Operations______________Standard (1): Unlocks when the motor isenergized by either a two or threeposition, maintained contact switch, or athree position momentary contact switch.Once unlocked, the latchbolt remainsretracted until it is selected to lock.Opening and closing the door has noeffect on the lock when selected tounlock. The latchbolt extends only whenthe door is opened and the motor isselected to lock. If the door is closed, itmust be opened to extend the latchbolt.Two additional variations on this featureare offered:
Without latchback (1a): Once unlocked,the latchbolt is held retracted only as longas the motor remains in the unlockedposition. A maintained-contact switch maybe used to keep the latchbolt retracted foran extended period of time.
Relock (1b) 09: Once unlocked, thelatchbolt is held retracted until the door isopened. It then extends automatically.This operation requires an additionalcontrol wire, and may be cancelled byadding an additional control switch. Amomentary-contact switch is used forunlocking, and the auxiliary switch is usedfor relocking. When the door is opened,the auxiliary switch repositions the motorto a locked position so that the lock willdeadlatch on closure.
Knob release(2): 120MC Deadlatchesmay be specified with knob release onone side, where the knob is always active.Knob may be mounted on the case side,or the cover side.
Key holdback (3): When unlocked by key,the deadlatch remains retracted untilrelocked by turning the key in the oppositedirection. Available one side only.
Note: Key cylinders for locks with key holdbackfeature must be installed at the factory.
Testing__________________120MC Series Deadlatches and Maxi-Mogul® Key Cylinders have been tested to1,000,000 operations.
Standards Compliance___All Series 120MC locks are UL Listed asBurglary-Resistant Mechanisms.
Maxi-Mogul® Key Cylinders meet UL437requirements.
Standard Features_______� Motor voltage – 120 VAC� Superior durability – Working parts of
stainless steel afford greater strengthand corrosion resistance.
� Standard lock size – All models usethe same size case, cover and mountingholes for simplified installation andframe preparation.
� External two-piece plug connector –All models install without coverremoval. Simple plug-in connection tofield wiring.
� External mounting holes – Easyinstallation, and eliminate the need forcover removal.
� Standard lock – Mounts behind frameand does not require a faceplate.
� 1" throw latchbolt – Offers greatersecurity. Each bolt is hardened to resistsawing. When latchbolt is engaged instrike, bevel is concealed to preventpicking.
� Mechanical unlocking by key – SpecifyFolger Adam Mogul cylinders, Maxi-Mogul® high security cylinders or otherMogul cylinders.
� Investment-cast stainless steel strike –Furnished with four tamper-resistantscrews.
� Fractional HP Motor – Permanentlylubricated for smooth quiet operationwith thermal overload protection and abrake for accurate locking position.
� Finish – Zinc plated case and cover.
120MC HALF-CYCLEDEADLATCH
A18 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum120MC HALF-CYCLE
DEADLATCHOptional Features________� Faceplate – US32D finish.� Indication/auxiliary switches – An
indication switch monitors the deadlocklever indicating a deadlocked latchbolt.The auxiliary switch monitors thelatchbolt for extended or retractedposition.
� Local electric key (LEK) – A uniquefunction which uses two types of keysfor applications where inmates carrytheir own keys, but supervision isnecessary. One key turns in onedirection only and operates the lockelectrically. The supervisory key turns inboth directions to operate the lockelectrically or mechanically. The electricoperation may be cancelled from acentral console or control point at anytime via a three-position switch.The Maxi-Mogul® key cylinder isuniquely suited for this high frequencyoperation, shown by cycle test of1,000,000 operations.
LEK not available on any 120MC-3Series Locks.
� Key Cylinder Extension – When thelock is keyed on the stop side of thejamb, an extension eliminates the needfor a special, recessed frame pocket.
� Optional motor voltage – 24 VAC or24 VDC.
Dimensional Data________Note: Dimensions are for information andplanning purposes only, and should notbe used as templates.
The chart at right shows applicability ofabove options to all 120MC Models.
For complete details, see How toSpecify in this section.
Specifications_________� Case and cover – 10 gauge steel.
� Latchbolt – Investment-caststainless steel, hardened, 1" throw.
� Deadlock lever – Stainless steel,adjustable for door gap variations.
� Bolt opening – Does not allowaccess to mechanism.
� Roller bolt – Investment-caststainless steel with stainless steelroller.
� Operating lever – Stainless steel tooperate with motor.
� Strike – Investment-cast stainlesssteel, attached with screws in twodirections.
� Motor – 120 VAC continuous duty,24 VAC or 24 VDC optional,synchronous-type gearmotor.
� Springs – Stainless Steel.
ElectricalCharacteristics________� AC motors – Synchronous-type
gearmotor with brake.
Ratings:
120 VAC: 60 Hz, 1.3 amps at fullload.
� DC motors – Permanent-magnetgearmotor.
Ratings: 24 VDC, 2.2 amps at fullload.
� Switches – SPDT, UL Listed, 15amps @ 125 or 250 VAC.
MODEL NO. OPERATIONLATCHBACK RELOCK
SWITCHINDICATION SWITCHES LEK
AVAILABLEWITH W/O DEADLATCH AUX
120MC-1-01 Standard (1) X X Yes120MC-1-04 Standard (1a) X X Yes120MC-1-09 Standard (1b) X X X Yes120MC-2-01 Knob Release (2) X X Yes120MC-2-04 Knob Release (2) X X Yes120MC-2-09 Knob Release (2) X X X Yes120MC-3-01 Key Holdback (3) X X No120MC-3-04 Key Holdback (3) X X No120MC-3-09 Key Holdback (3) X X X No
FA Rev. 02-10 A19
For more information, please call 210.533.1231.
Description______________Series 120ED Deadbolts are pintumbler, solenoid-operated locks forswinging doors. Specify keying asfollows:
121 Keyed case side122 Keyed cover side126 Keyed both sides
Applications_____________Series 120ED Deadbolts are ideal for awide range of medium or maximumsecurity applications including celldoors, corridor doors, entryways or anyopening requiring a deadbolt-typelocking. These jamb-mounted locks aredesigned to be part of an electricalsystem with remote unlocking andmonitoring to provide staff safety andoperational flexibility.
Operation_______________Key Holdback (3): Units unlock by keyor when the solenoid is energized by amomentary-contact switch oremergency-unlock signal (fire alarm).Once unlocked, the deadbolt is heldmechanically retracted, regardless ofdoor position, and must be relocked by key.
Testing__________________120ED Series Deadbolts and Maxi-Mogul® key cylinders have been testedto 1,000,000 operations.
Standards Compliance___Series 120ED locks are UL Listed asBurglary-Resistant Mechanisms. Maxi-Mogul® key cylinders meet UL437requirements.
ASTM F-1577 Grade 1 Impact
Standard Features_______� Solenoid voltage – 120 VAC� Superior durability – Working parts
of stainless steel afford greaterstrength and corrosion-resistance.
� Standard lock size – All models usethe same size case, cover andmounting holes for simplifiedinstallation and frame preparation.
� External two-piece plug connector –All models install without coverremoval. Simple plug-in connection tofield wiring.
� External mounting holes – Easyinstallation eliminates the need forcase and cover removal.
� Standard lock – Mounts behindframe and does not require afaceplate.
� 1" throw deadbolt – Offers greatersecurity. Each bolt is hardened toresist sawing.
� Mechanical unlocking by key –Specify Folger Adam Mogul cylinders,Maxi-Mogul® high security cylinders orother mogul cylinders.
� Continuous-duty solenoid – Forinstant action; positive unlocking.
� Finish – Zinc plated case and cover.� Deadlock switch – Monitors the
deadlock lever indicating adeadlocked deadbolt.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum 120ED DEADBOLT
A20 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________� Optional solenoid voltage –
230 VAC, 60Hz.� Key Cylinder Extension – When the
lock is keyed on the stop side of thejamb, an extension eliminates theneed for a special, recessed framepocket. Specify E-3 for 3", E-4 for 4"or E-5 for 5".
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
For complete details, see How toSpecify in this section.
Specifications_________� Case and cover – 10 gauge steel.
� Deadbolt – Investment-cast stainless steel, hardened, 1" throw.
� Deadlock lever – Stainless steel, adjustable for door gap variations.
� Bolt opening – Does not allowaccess to mechanism.
� Operating lever – Stainless steelto operate with solenoid.
� Solenoid – 120 VAC continuousduty with stainless steel guides,230VAC optional.
� Springs – Stainless steel.
ElectricalCharacteristics________� Solenoid voltage standard
(120 VAC) – 13 amps inrush - .75amps seated.
� Solenoid voltages optional(230 VAC) – 6.6 amps inrush -.38 amps seated.
� Switches – SPDT, UL Listed, 15amps @ 125 or 250 VAC.
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum120ED DEADBOLT
MODEL NO.OPERATION
DESCRIPTIONLATCHBACK
INDICATIONSWITCH
DEADLOCK
120ED-3-01 Key Holdback (3) X X
The chart below shows applicability ofabove options to all 120ED Models.
FA Rev. 02-10 A21
For more information, please call 210.533.1231.
Description______________Series 120RUP Deadlatches are pintumbler, solenoid-operated locks forroll-up doors. Specify keying as follows:
121 Keyed case side122 Keyed cover side126 Keyed both sides
Applications_____________Series 120RUP Deadlatches aredesigned to provide security for garageand service bay roll-up doors. In thecase of roll-up shutters or unusualclosures, the units may be keyed twosides, with key holdback one side only.120RUP Models are fully compatiblewith electrically operated and monitoredsystems and provide safe, remotelocking and unlocking.
Operation_______________This device unlocks when the solenoidis energized by a momentary contactswitch. Once unlocked, the latchbolt isheld mechanically retracted and a switchenergizes the “open” circuit of the roll-up door. When the door is opened, thelatchbolt extends automatically. 120RUPlocks may be mechanically unlocked bykey, with latchbolt remaining retracteduntil relocked by key.
Testing__________________120RUP Deadlatches and Maxi-Mogul®
key cylinders have been tested to1,000,000 operations.
Standards Compliance___120RUP locks are UL Listed as Burglary-Resistant Mechanisms. Maxi-Mogul® keycylinders meet UL437 requirements.
Standard Features_______� Solenoid voltage – 120 VAC.
� Superior durability – Working partsof stainless steel afford greaterstrength and corrosion-resistance.
� Standard lock size – All models usethe same size case, cover andmounting holes for simplifiedinstallation and frame preparation.
� External mounting holes – Easyinstallation and eliminate the need forcase and cover removal.
� 1" throw latchbolt – Offers greatersecurity. Each bolt is hardened toresist sawing.
� Mechanical unlocking by key –Specify Folger Adam Mogul cylindersor Maxi-Mogul® high securitycylinders.
� Continuous-duty solenoid –Provides instant unlocking action.
� Finish – Zinc plated case and cover.
Optional Features________� Optional solenoid voltage –
230 VAC, 60Hz.
� Indication/auxiliary switches –An indication switch monitors thedeadlock lever indicating adeadlocked latchbolt.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Roll-up
SecurityLevel: Medium/Maximum 120RUP DEADLATCH
A22 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Key cylinder extension – When thelock is keyed on the stop side of thejamb, an extension eliminates theneed for a special, recessed framepocket. Specify E-3 for 3", E-4 for 4"or E-5 for 5" extensions.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
For complete details, see How toSpecify in this section.
Specifications_________� Case and cover – 10 gauge steel.
� Latchbolt – Investment-caststainless steel, hardened, 1" throw.
� Deadlock lever – Stainless steel,adjustable for door gapvariations.
� Roller bolt – Investment-caststainless steel with stainless steelroller.
� Operating lever – Stainless steelto operate with solenoid.
� Solenoid – 120 VAC continuousduty with stainless steel guides,230VAC optional.
� Springs – Stainless steel.
ElectricalCharacteristics________� Solenoid voltage standard
(120 VAC) – 13 amps inrush -.75 amps seated.
� Solenoid voltages optional (230 VAC) – 6.6 amps inrush -.38 amps seated.
� Switches – SPDT, UL Listed, 15 amps @ 125 or 250 VAC.
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Roll-up
SecurityLevel: Medium/Maximum120RUP DEADLATCH
1 3
2
4 5
8
6
FA Rev. 02-10 A23
For more information, please call 210.533.1231.
FOLGER ADAM ELECTRIC LOCKS
HOW TO SPECIFY120 SERIES LOCKS
KeyingLocation
121Case Side
122Cover Side
126Both Sides
Basic ModelsDeadlatches
ESolenoid
MFull-Rotation
Motor
MCTwo-Position
Motor
DeadboltsED
Solenoid
RUPSolenoid
(Roll-Up Door)
OperationSeries
1Standard
2Knob Release
3Holdbackby Key
(one side only)
SwitchFunctions
01DeadlockIndication
Switch WithLatchback
04DeadlockIndicationSwitch NoLatchback
07Electric
Holdback
Key Cylinderand Finish
Folger AdamMogul
MPrep. Only
M0-US26D110 Mogul
Cylinder withUS26D Finish
M1-US26D190-1 Maxi-Mogul® KeyCylinder withUS26D Finish
190-AASSA Mogul Key Cylinderwith US26D
Finish
190MMedeco MogulKey Cylinder
with US4 Finish
Available KeyCylinderFinishes:
US26D(standard)
US26D
LEKFeature
LEK-1Case Side
LEK-2Cover Side
LEK-6Both Sides
9Key CylinderExtension
E33" Long
E44" Long
E55" Long
LockHanding*
Deadlatches
LHRBLeft Hand
Reverse Bevel
RHRBRight Hand
Reverse Bevel
DeadboltsLH
Left Hand
RHRight Hand
7OperatingVoltage
Solenoid120 VAC230 VAC
Motor120 VAC24 VDC
1 2 3 4 5 6 7 8 9
126 E - 1 - 01 x M0-US26D x LHRB x 120 VAC x LEK-2 x E3
*For applicationhanding see thehanding chart onthe followingpage.
A24 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ELECTRIC LOCKS
HOW TO SPECIFY120 SERIES LOCKS
Specify circled swing number when ordering.
FA Rev. 02-10 A25
For more information, please call 210.533.1231.
Description______________NS400E Series Deadlatches are pintumbler, solenoid-operated locks forswinging doors. Specify buildershardware cylinders and keying asfollows:
NS402E & NS402EFSKeyed one side
NS406E & NS406EFSKeyed both sides
Note: See optional features for factory or customer-supplied key cylinders. For modelsNS400E and NS400EFS, no cylinders are supplied.
Applications_____________Specify for minimum/medium securityswinging cell, corridor or administrationareas of institutions with 2" wide hollowmetal jamb construction.
Operations______________A remote switch is used to control thelock electrically, or it may be operatedmechanically by builders hardwarecylinder. These locks offer theconvenience of remote, electricunlocking or locking and automaticdeadlocking when the door is closed.
Fail-Safe Models
Unlock when solenoid is de-energized(1): by switch or power failure, and thelatch remains retracted while the door isopen. Upon closure, with powerrestored, the latchbolt extends anddeadlocks.
Non-Fail-Safe Models
Unlock when solenoid is energized(1): by a momentary-contact switch.Latchbolt remains retracted mechanically
until the door is opened. Upon closure,the latchbolt extends automatically(mechanical latchback).
Unlock when solenoid is energized(2): by a momentary-contact switch.Latchbolt is electrically held retractedonly as long as control switch is tripped(no mechanical latchback). The doormust be opened while control switch isin the unlocked position. Upon closure,the latchbolt deadlocks automatically.Continuous-duty feature is standard tohold bolt retracted for extended periods(no latchback, continuous-duty powermodulator).
Unlock when solenoid is energized(3): by a momentary-contact switch.Latchbolt is held electrically retracteduntil door is opened, then it extendsautomatically (electric holdback).
Standards Compliance____� All deadlatch models UL1034 –
Burglary-resistant electric deadbolts.� Non-fail-safe models, UL10B –
Electrically controlled single pointlocks or latches, three-hour rating, A label.
� ASTM F-1577 Grade 1 Impact
Standard Features_______� Instant solenoid actuation – Heavy
duty solenoid provides fast, audiblelatchbolt operation.
� Fail-safe model operation – Solenoidholds latchbolt extended anddeadlocked.
� Compact size – Designed for hollowmetal frames with standard 2" face.
� Power modulator – Allows solenoidmodels to operate on either 24VAC or24VDC - reduces power consumption.UL listed and patented (Pat. No.4,797,779).
� Two-piece, twelve-pin plug connector – Simplifies wiring, allowspre-wiring of the lock opening.
� Heavy duty lock mechanism –Designed with heavy duty, corrosion-resistant working parts tested over1,000,000 cycles.
� Stainless steel strike – Angled lip-type, furnished with tamper-resistantscrews. Requires less force to closeand lock the door.
� Mechanical latchback (ModelNS400E-01) – Holds latchboltretracted until door opens. Notavailable in fail-safe models.
� Mechanical unlocking by key –Offers manual control at the door inevent of power failure or at any othertime.
� Stainless steel latchbolt – 3/4" throw,hardened to resist sawing.
FOLGER ADAM ELECTRIC LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/Medium NS400E
SOLENOID-OPERATED DEADLATCHES
A26 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Holdback switch (ModelsNS400EFS, NS400E with electricalholdback) – Maintains electricalholdback. Requires a relay in thecentral control console.
� Finish – US32D satin stainless steel.� Indication switch – An internal switch
to monitor the positions of thedeadlock actuator. Signals deadlockedcondition.
Optional Features_______� Builders hardware cylinders – High
security six-pin tumbler cylinder maybe specified. Special keying requestswill be accommodated, if possible.
NOTE: Customer-supplied key cylinders may beused to adapt NS400 Series locks to a specifickeying system. These cylinders must have:a) 1-5/32" diameter, full bar stock bodies.b) 1-1/8" length, including cam.c) Standard, removable Yale-type cam.Cylinders and all keys should be sent to SouthernFolger Detention Equipment Company and arerequired with cylinder extenders.
� Local electric key (LEK) – Inmate keyoperates lock electrically. Staff keysalways operate the lock manually andcan operate it electrically. Feature isenabled or canceled from a remotecontrol console.
NOTE: When key cylinders for LEK are suppliedby customer, contact factory before ordering orsending cylinders.
� Inmate push button – Allowsoperation of the lock from inside theroom or cell. May be canceled fromcentral control console. A double-pole,double-throw switch is available foradditional functions.
� Key cylinder extension – Requiredwhen lock is keyed on the stop side ofthe door frame. Five standard lengthsare offered:Jamb CylinderSize Extension4-1/2" – 5" 4-3/4"5" – 6" 5-3/4"6" – 7" 6-3/4"7" – 8" 7-3/4"8" – 9" 8-3/4"
NOTE: Please specify appropriate cylinderextension length when ordering. Special lengthsmay be provided for other jamb thicknesses.Contact factory for pricing and availability.
� Finish – Key Cylinder: US26D
Specifications_________� Lock case – Investment-cast
stainless steel.
� Latchbolt – Investment-caststainless steel hardened.
� Latchbolt throw – 3/4"
� Operating lever – Stainless steel.
� Deadbolt lever/trigger bolt –Investment-cast stainless steel.
� Strike – Stainless steel stamping,angled lip.
ElectricalCharacteristics________� Solenoid – Tubular, continuous-
duty power modulator.
� Voltage – 24 VAC or DC, 3.3amps, 82 watts inrush; .25 amps6 watts seated.
� Indication switch – SPDT, UL listed.
� Switch rating – 5 amp @ 125 or 250 VAC.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
For complete details, see How toSpecify in this section.
FOLGER ADAM ELECTRIC LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/MediumNS400E
SOLENOID-OPERATED DEADLATCHES
MODEL OPERATIONINDICATION
SWITCH
LATCHBACK OPERATIONALSWITCH
HOLDBACK
LEKOPTION
CONTINUOUSDUTY
MODULATORWITH WITHOUT ELECTRIC
NS400E-01 1 • • Available Standard
NS400E-04 2 • • Available Standard
NS400E-07 3 • • • Available Standard
NS400EFS-04 1 • • • Available Standard
Feature/Option Chart
FA Rev. 02-10 A27
For more information, please call 210.533.1231.
Description______________NS400M and NS400MC SeriesDeadlatches are pin tumbler, motor-operated locks for swinging doors.Specify builders hardware cylinders andkeying as follows:
NS402M/MC Keyed one sideNS406M/MC Keyed both sides
Note: See optional features for factory orcustomer-supplied key cylinders. For ModelsNS400M and NS400MC, no cylinders aresupplied.
Applications_____________Specify for minimum/medium securityswinging cell, corridor or administrationareas of institutions, with 2" widehollow metal jamb construction.
Operations______________A remote switch is used to control thelock electrically, or may be operatedmechanically by a builders hardware keycylinder. These locks offer theconvenience of remote, electricunlocking or locking and automaticdeadlocking when the door is closed.
Motor-Actuated Models
Unlock when the motor is energized(1): by a momentary-contact switch.Latchbolt is held mechanically retracteduntil the door is opened. It then extendsautomatically (mechanical latchback).
Two-Position Motor Actuated Models
Lock or unlock when the motor isenergized (1): by either a two or three-position maintained-contact switch, orby a three-position, momentary-contactswitch. When unlocked by controlswitch, latchbolt remains retracted
by motor position until control switch isset to lock. Latchbolt is heldmechanically retracted until the door isopened. It will then extendautomatically, if the control switch is setto the lock position (mechanicallatchback).
Lock or unlock when the motor isenergized (2): by either a two or three-position maintained-contact switch, or athree-position momentary-contactswitch. Latchbolt then remains retracteduntil selected to lock. Opening andclosing the door has no effect on thelock (no latchback).
Unlock when the motor is energized(3): by a momentary contact switch. Arelock switch energizes the motor torelock once the door is open. Onclosure, the latchbolt deadlocksautomatically (no latchback with relock).
Standards Compliance___� All deadlatch models, UL1034 –
Burglary-Resistant Mechanisms.� All models (except two-position
motor actuated), UL10B – Electricallycontrolled single point locks orlatches, three-hour rating, A label.
� ASTM F-1577 Grade 1 Impact
Standard Features_______� 300 lb. rated side load motor
operation (Models NS400M,NS400MC) – Preclude jamming byapplying side pressure on the door.
� Compact size – Designed for hollowmetal frames with standard 2" face.
� Two-piece, twelve-pin plugconnector – Simplifies wiring, allowspre-wiring of the lock opening.
� Heavy-duty lock mechanism –Designed to complement the hightorque motor. Corrosion resistantworking parts tested over 1,000,000cycles.
� Stainless steel strike – Angled liptype, furnished with tamper resistantscrews. Requires less force to closeand lock the door.
� Mechanical latchback (ModelsNS400M, NS400MC) – Holdslatchbolt retracted until door opens.
� Mechanical unlocking by key –Offers manual control at the door inevent of power failure, or at any othertime.
� Stainless steel latchbolt – 3/4" throw,hardened to resist sawing.
� Relock switch (Model NS400MC) –Repositions motor to relock whendoor is opened.
� Finish – Key Cylinder: US32D.
FOLGER ADAM ELECTRIC LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/Medium NS400M and 400MC
MOTOR-OPERATED DEADLATCHES
� Indication switch – An internal switchto monitor the positions of thedeadlock actuator. Signals deadlockedcondition.
Optional Features________� Builders hardware cylinders – High
security six-pin tumbler cylinder maybe specified. Special keying requestswill be accommodated, if possible.
Note: Customer supplied key cylinders may beused to adapt NS400 Series locks to a specifickeying system. These cylinders must have:a. 1-5/32" diameter, full bar stock bodies.b. 1-1/8" length, including cam.c. Standard, removable Yale-type cam.
Cylinders and all keys should be sent toSouthern Folger Detention EquipmentCompany and are required with cylinderextenders.
� Local electric key (LEK) – Inmate keyoperates lock electrically. Staff keysalways operate the lock manually andcan operate it electrically. Feature isenabled or canceled from a remotecontrol console.
� Inmate push button – Allowsoperation of the lock from inside theroom or cell. May be canceled fromcentral control console. A double pole, double throw switch is available foradditional functions.
� Key cylinder extension – Requiredwhen lock is keyed on the stop side ofthe door frame. Five standard lengthsare offered:Jamb CylinderSize Extension4-1/2" – 5" 4-3/4"5" – 6" 5-3/4"6" – 7" 6-3/4"7" – 8" 7-3/4"8" – 9" 8-3/4"
NOTE: Please specify appropriate cylinderextension length when ordering. Special lengthsmay be provided for other jamb thicknesses.Contact factory for pricing and availability.
� Finish – Key Cylinder: US26D.
Specifications_________� Lock case – Investment-cast
stainless steel.
� Latchbolt – Investment-cast stainless steel hardened.
� Latchbolt throw – 3/4"
� Operating lever – Stainless steel.
� Deadbolt lever/trigger bolt –Investment-cast stainless steel.
� Strike – Stainless steel stamping,angled lip.
ElectricalCharacteristics________� Motor – High-torque,
permanently lubricated,permanent magnet, planetarygearmotor, UL Listed.
� Voltage – 24 VDC, operates on24 VAC via rectifier 0.12 Ampsrunning, 1.29 amps stalled.
� Indication switch – SPDT, ULlisted.
� Switch rating – 5 amp @ 125 or250 VAC.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
For complete details, see How toSpecify in this section.
A28 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ELECTRIC LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/MediumNS400M and 400MC
MOTOR-OPERATED DEADLATCHES
Feature/Option Chart
MODEL OPERATIONINDICATION
SWITCH
LATCHBACK OPERATIONALSWITCH
HOLDBACK
LEKOPTION
CONTINUOUSDUTY
MODULATORWITH WITHOUT
NS400M-01 1 • • Available No
NS400MC-01 1 • • No No
NS400MC-04 2 • • No No
NS400MC-09 3 • • • Available No
FA Rev. 02-10 A29
For more information, please call 210.533.1231.
Description______________NS400MCD is a pin tumbler, two-position motor-operated deadbolt forswinging doors. Specify buildershardware cylinders and keying asfollows:
NS402MCD Keyed one sideNS406MCD Keyed both sides
Note: See optional features for either factory orcustomer-supplied key cylinders. ModelNS400MCD, no cylinder supplied.
Applications____________Specify for minimum/medium securityswinging cell or office areas ofinstitutions requiring deadbolt locks foruse in 2" wide hollow metal jambconstruction.
Operations______________Locks or unlocks when motor isenergized by either a two or three-position maintained contact switch.Once unlocked, the deadbolt remainsretracted until selected to lock. Openingand closing the door have no effect onthe lock. Non-fail-safe only. Holdbackswitch prevents the deadbolt fromextending while the door is open.Deadbolt is deadlocked upon closure ofthe door.
Standards Compliance___� UL1034 – Burglary-Resistant
Mechanisms.� ASTM F-1577 Grade 1 Impact
Standard Features_______� 300 lb. rated side load motor
operation – Precludes jamming byapplying side pressure on the door.
� Heavy-duty lock mechanism –Designed to complement the hightorque motor. Corrosion-resistantworking parts tested over 1,000,000cycles.
� Compact size – Specifically for hollowmetal frames with standard 2" face.
� Two-piece, twelve-pin plugconnector – Simplifies wiring, allowspre-wiring of the lock opening.
� Stainless steel strike – Furnished withtamper-resistant screws.
� Holdback switch – Does not allowdeadbolt to extend while door isopen.
� Mechanical unlocking by key –Offers manual control at the door inevent of power failure, or at any othertime.
� Stainless steel deadbolt – 3/4"throw, hardened to resist sawing.
� Faceplate finish – US32D satinstainless steel.
� Indication switch – An internal switchto monitor the positions of thedeadlock actuator. Signals deadlockedcondition.
Optional Features________� Builders hardware key cylinders –
High security six-pin tumbler cylindermay be specified. Special keyingrequests will be accommodated, ifpossible.Note: Customer supplied key cylinders may beused to adapt NS400 Series locks to a specifickeying system. These cylinders must have:1. 1-5/32" diameter, full bar stock bodies.2. 1-1/8" length, including cam.
3. Standard, removable Yale-type cam.Cylinders and all keys should be sent toSouthern Folger Detention EquipmentCompany and are required with cylinderextenders.
� Key cylinder extension – Requiredwhen lock is keyed on the stop side ofthe door frame. Five standard lengthsare offered:Jamb CylinderSize Extension4-1/2" – 5" 4-3/4"5" – 6" 5-3/4"6" – 7" 6-3/4"7" – 8" 7-3/4"8" – 9" 8-3/4"
Note: Please specify appropriate cylinderextension length when ordering. Speciallengths may be provided for other jambthickness. Contact factory for pricing andavailability.
� Finish – Key cylinder: US26D.
FOLGER ADAM ELECTRIC LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/Medium NS400MCD
MOTOR-OPERATED DEADBOLTS
A30 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Specifications_________� Lock case – Investment-cast
stainless steel.
� Deadbolt – Investment-caststainless steel hardened.
� Deadbolt throw – 3/4"
� Deadlock lever/operating lever– Stainless steel.
� Strike – Stainless steel stamping.
ElectricalCharacteristics________� Motor – High-torque,
permanently lubricated,permanent magnet, planetarygearmotor, UL Listed.
� Voltage – 24VDC or 24VAC 0.12running, 1.29 amps stalled.
� Indication switch – SPDT, ULlisted.
� Switch rating – 5 amp @ 125 or250 VAC.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
For complete details, see How toSpecify in this section.
FOLGER ADAM ELECTRIC LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/MediumNS400MCD
MOTOR-OPERATED DEADBOLTS
MODEL OPERATIONINDICATION
SWITCHLATCHBACKWITHOUT
LEKOPTION
CONTINUOUSDUTY
MODULATOR
NS400MCD-04-01 Standard • • No No
Feature/Option Chart
FA Rev. 02-10 A31
For more information, please call 210.533.1231.
FOLGER ADAM ELECTRIC LOCKS
HOW TO SPECIFYNS400 SERIES LOCKS
1 4
2
3
5
6
7
89
10KeyingLocation
NS400No Cylinder
NS402Keyed 1 Side
NS406Keyed 2 Sides
Basic ModelsDeadlatches
ESolenoid
MMotor
MC2-Position Motor
DeadboltMCD
2-Position Motor
SwitchFunctions
01Deadlock
Indication SwitchWith Latchback
04Deadlock
Indication SwitchNo Latchback
07Deadlock
Indication SwitchNo Latchback
Auxiliary SwitchFor ElectricHoldback
09Deadlock
Indication SwitchNo Latchback
Auxiliary SwitchFor Electric
RelockMode of
Operation(E Solenoid Only
For Fail-Safe)
NFSNon-Fail-Safe
FSFail-Safe
CylinderOptions
BCPrep For Builders
HardwareCylinder,CustomerSupplied
B2High Security
Builders HardwareCylinder
LatchboltHanding*
RHRB LHRBRHSB LHSB
DeadboltHanding
LHRH
Voltage
Solenoid24 VAC24 VDC
Optional
Local ElectricKey
Optional
Inmate PushButton
FaceplateFinish
StandardUS32D
11Optional
CylinderExtension
Select StandardOffered Length
1 2 3 4 5 6 7 8 9 10 11
NS400 E FS 01 B2 RHRB 24 VAC LEK PB-1 US32D Cyl. Ext.5-3/4"
* For application handing, see the handing chart on the following page.
A32 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ELECTRIC LOCKS
HOW TO SPECIFYNS400 SERIES LOCKS
Specify circled swing number when ordering.
FA Rev. 11-12 A33
For more information, please call 210.533.1231.
Description______________Series 800 Deadlatches are levertumbler, solenoid operated locks forswinging or sliding chain-link fencegates. Specify keying as follows:
For Swinging Gates:802ES-L Keyed cover side806ES-L Keyed both sides
For Sliding Gates:802ER-L Keyed cover side806ER-L Keyed both sides
Applications_____________For use on sliding or swinging chain-linkfence gates. Provide automaticdeadlocking with flexibility of remoteunlocking.
Operation_______________This lock is electrically operated forunlocking. The deadbolt retracts whensolenoid is energized. Once retracted,deadbolt is held electrically retracteduntil gate is closed. Deadbolt extendsautomatically in case of power failure.Emergency mechanical operation byparacentric key.
Testing__________________The 800 Series Electric Gate locks havebeen electrically tested for over1,000,000 operating cycles.
Standard Features_______� Solenoid actuated – 120 VAC, 60hz,
continuous-duty type.� Unlocking by prison paracentric key
in case of power failure or for localcontrol. When unlocked by key,deadbolt remains retracted untilrelocked by key.
� Deadlocks automatically –When gate is closed.
� Adjustable mounting and lockingtongue – Fits fence posts between 2" and 8-5/8" diameter; gate postsbetween 1" and 4-1/4" diameter.See "How to Order" page A34.
� Push-in type terminal strip – Foreasy field wiring.
� Case and cover – 7-gauge steel� Corrosion resistant working parts� Stainless steel deadbolt –
3/4" diameter� Hardened-steel deadlock lever� Tumbler options – Choice of five or
six tumbler models. Six tumblermodel offers greater pick resistance.Tumblers are made of spring-temperbrass and activated by heavy,phosphor-bronze springs.
� One-piece key cylinder – Investment-cast, bronze alloy with paracentrickeyway. (Paracentric, lever tumblerkeys must be purchased separately.)
� Tamper resistant screws forattaching cover.
� Finish – Zinc plated.� Mounting hardware – Supplied with
mounting brackets, locking tongueand mounting screws.
� Indication switch – A lock statusswitch monitors the deadbolt and itsdeadlocked condition.
FOLGER ADAM ELECTRIC LOCKSKey: Prison ParacentricDoor: Swinging/Sliding
Fence GateSecurityLevel: Maximum
800 GATE LOCKS
802ESLeft hand shown.
802ERLeft hand shown.
A34 Printed in USA FA Rev. 11-12
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________� Solenoid voltage – 220VAC, 60hz.� Auxiliary indication switch – Specify
“ES-LL” or “ER-LL”.Note: When gate is open, the switch actuatorfor the locking tongue can be manuallydepressed, giving a false indication that thegate is locked. This can be eliminated byinstalling a gate position indication switch andwiring it in series with the indication switch inthe lock. A “secure” signal can then beproduced only after three conditions havebeen met:
1. Locking tongue switch actuator isdepressed;
2. Deadbolt is extended and deadlocked, and3. Gate is closed.
Note: Electrical interlocking of gates requiresspecial wiring and/or adaptations for controlconsoles.
Specifications_________� Case and cover – 7 gauge steel.
� Finish – Zinc plated.
� Working parts – Zinc plated steel.
� Springs – Stainless Steel.
� Deadbolt size – 3/4" diameter.
ElectricalCharacteristics________� Actuator – Continuous-duty
solenoid.
� Voltage – 120VAC, 60HZ, 13amps inrush, .75 amps seated. 220VAC, 60HZ, 6.5 amps inrush,0.3 amps seated.
� Indication switch(es) – SPDT, ULlisted.
� Ratings – 15 amps @ 125 or 250 VAC.
How to Specify__________Dimensional Data
1. Model Number
2. Handing
3. Tumbler (example 802ES-6)
4. Any optional features desired(example 802ES x LH)
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM ELECTRIC LOCKS Key: Prison ParacentricDoor: Swinging/Sliding
Fence GateSecurityLevel: Maximum
800 GATE LOCKS
800ER Fence Gate LocksLOCK COVER PLATE TRACK SIDE
802 ERKEYEDTRACKSIDE
806 ERKEYEDBOTHSIDES
13 HRHL 32
33 HRHL 34
LEGEND
Specify circled swing number when ordering.
802ESLeft hand shown.
802ERLeft hand shown.806ES
KEYEDBOTHSIDES
800ES Fence Gate LocksCOVER PLATE HINGE SIDE
74 HRHL 48
802ESKEYEDHINGESIDE
94 HRHL 50
FA Rev. 02-10 A35
For more information, please call 210.533.1231.
Description______________Series D9300 locks are pin tumblermortise locks with an electrically-controlled knob-lockout function forswinging doors.
Applications_____________An extra heavy duty mortise lockfor use on swinging doors inminimum/medium security cell, orpublic areas of detention facilities.Available in a deadlocking latchbolt style only.
Operation_______________Active knob(s) or lever handles may belocked and unlocked from a remotelocation. Latchbolt is retracted by eitherthe key cylinder or active knob/lever,unless the knob/lever is locked out.Available in fail-safe or non-fail-safeoperation with a variety of lockingfunctions.
Models__________________D9341/D9345 Fail-Safe Operation:Controlled knobs/levers unlock whenpower is off or in case of power failure.
D9346/D9350 Non-Fail-SafeOperation: Controlled knobs/leversremain locked in case of power failure.
Standards Compliance___UL10B listed as Fire Door Accessory, 4 hour rating.
UL437 Listed Maxi-Mogul® Cylinders.
Tested to over 1,000,000 operations.
Standard Features_______� Fits ANSI door preparation –
Standardized installation in hollowmetal doors modified toaccommodate lock body thickness of1-1/8" and wiring requirements.
� Door thickness – Doors must be1-3/4" to 2-1/2" thick. Specify doorthickness.
� Armored front – 8" x 1-1/4" steel, 10 gauge.
� High strength case and cover – 12-gauge wrought steel, zinc chromated.
� Corrosion-resistant working parts –Internal working parts are stainlesssteel or zinc chromated steel.
� Durable hubs – Solid stainless steelconstruction, on the square.
� Spindle – 11/32" cold drawn steel.� Latchbolt – 3/4" throw solid stainless
steel.
� Solenoid-actuated lockout – 24VDCtubular, continuous-duty solenoid.
� Latchbolt size – 11/16" x 1-1/4".� Reversible – Locks are field
reversible. Handing should bespecified upon ordering.
� Key cylinder – Furnished with UL437listed, high security Maxi-Mogul®
Cylinder.� Screws – Tamper-resistant screws. � Tamper-resistance – All bolts,
including the auxiliary latchbolt, arefully tunneled to help preventjamming of the mechanism withforeign material.
� Strike – Supplied with curved-lipstrike having 1-1/4" lip length, anddust box (see page A38 for details).Buffed stainless steel only.
� Finish – US32D.� Maxi-Mogul® key cylinder – Six pin
tumbler high security cylinder.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Minimum/Medium D9300 ELECTRIC
MAXI-MORTISE™
Shown without LeverTrak®.
Optional Features_______� Strike switch – Strike-mounted
indication switch for electricallymonitored systems indicates whetheror not the latchbolt is extended intothe opening in the strike plate. Theswitch is supplied with a 16-gaugezinc plated steel housing.
� Mogul cylinder – Specify “MO” forkeying locks into an existing Mogulsystem.
� ASSA or Medeco Mogul cylindersare available.
� Indication switches – For monitoringthe position of the deadlock lever orknob/lever lock out. These switchescan be used for remote doormonitoring to control alarms,indication lights, interlocking, etc.Specify “DIS” – Deadlock IndicationSwitch shows the latchbolt isdeadlocked.Specify “KLO” – Knob Lock Out showslocking of the active knobs.
Trim Design_____________Knobs� Specify “KR” – For knob and rose
trim with lock.� Material – Stainless steel.� Dimensions – 2-1/4" diameter.� Safety knob – Specify “SK” knob and
side installed on.� See “How to Order” on page A38.Roses� Material – Stainless steel.� Dimensions – 2-11/16" diameter,
concealed trim design.
LeverTrak® Handle Guide Sets� LT & LTE – Handle guides must be
specified. The track prevents damageto mortise locks from over-travel ofthe handle.
� Material – Stainless steel.� Lever handles must be installed with
track.
A36 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Minimum/MediumD9300 ELECTRIC
MAXI-MORTISE™
KR – Knob handle and rose SK – Safety knob (inside)
LT – Lever handles and track setThe “Lemont”
LTE – Lever handles, track set and escutcheon
The “Limited”
FA Rev. 02-10 A37
For more information, please call 210.533.1231.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Minimum/Medium D9300 ELECTRIC
MAXI-MORTISE™
D9341 – Fail-Safe Deadlatch� Deadlatch operated by key outside.� Power locks inside handle – unlocks when
power is off.Outside handle is rigid.
D9342 – Fail-Safe Deadlatch� Deadlatch operated by key both sides.� Power locks inside handle – unlocks when
power is off.Outside handle is rigid.
D9343 – Fail-Safe Deadlatch� Deadlatch operated by key outside.� Power locks both handles – unlocks when
power is off.
D9344 – Fail-Safe Deadlatch� Deadlatch operated by key both sides.� Power locks both handles – unlocks when
power is off.
D9345 – Fail-Safe Deadlatch� Deadlatch operated by key outside.� Power locks outside handle – unlocks when
power is off.� Inside handle always active.
D9346 – Non-Fail-Safe Deadlatch� Deadlatch operated by key outside.� Power unlocks inside handle – locks when
power is off.Outside handle is rigid.
D9347 – Non-Fail-Safe Deadlatch� Deadlatch operated by key both sides.� Power unlocks inside handle – locks when
power is off.Outside handle is rigid.
D9348 – Non-Fail-Safe Deadlatch� Deadlatch operated by key outside.� Power unlocks both handles – locks when
power is off.
D9349 – Non-Fail-Safe Deadlatch� Deadlatch operated by key both sides.� Power unlocks both handles – locks when
power is off.
D9350 – Non-Fail-Safe Deadlatch� Deadlatch operated by key outside.� Power unlocks outside handle – locks when
power is off.� Inside handle always active.
OUTSIDE INSIDE OUTSIDE INSIDE
A38 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Cylinder Data____________� Maxi-Mogul® key cylinders – D9300
Series Mortise Locks are provided withMaxi-Mogul® Key Cylinders, six pintumbler.
� Cylinder collar – An adjustablecylinder collar will be provided to suitthe cylinder length and door thicknesswhen both locks and cylinders areordered. If not specified, rings will befor 1-3/4" thick door.Keys must be ordered separately.
Strikes__________________D9300 Series Locks are supplied with acurved lip strike having a 1-1/4" liplength, for use with doors 1-3/4" to 2"thick. Buffed stainless steel finish only.� Strike with indication switch – For
electrical monitoring.� Strike box – Wrought steel, zinc
plated, reversible for installation withflat or curved-lip strike.
� Special lip lengths – Strikes areinstalled on the same verticalcenterline as the lock. 1-1/4" lip lengthis standard. 1-1/2" lip length isoptional for doors from 2-1/8" to 2-1/2" thick.
How to Order____________Specify1) Trim
a. KR, Knob and rose set.(Safety knob available, “SK”,specify side.)
b. LT, LeverTrak® Guide with handleand rose.
c. LTE, LeverTrak® Guide withhandle, rose and escutcheon.
2) Lock modelExample: D9350.
3) Function (see function descriptions).4) Handing (RH, LH, RHR, LHR).5) Cylinder
(Maxi-Mogul® is standard.)a. With “MO” Mogul Cylinder
option.b. With “ASSA” or “Medeco”
Cylinder option.6) Door material/thickness.7) Strike lip length
Strikes are installed 3/8" above thevertical centerline of the lock. 1-1/4"lip length is standard. 1-1/2" liplength is optional for doors from 2-1/8" to 2-1/4" maximum thickness.
8) Lock switch(es)DIS – Deadlock indication.KLO – Knob lockout indication.
9) Strike switch(es)S – Strike (keeper) switch.
10) FinishExample:LT-D9350 LH2" HM x 918-LS x US32D.The above is a remote unlockingentrance having free egress fromthe inside.
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Minimum/MediumD9300 ELECTRIC
MAXI-MORTISE™
Maxi-Mogul® Key Cylinder
Maxi-Mogul® Key
918-D-SStrike switch
900-BOXDust box
918-L ANSILatchbolt-only
strikeRH/LHR shown
FA Rev. 02-10 A39
For more information, please call 210.533.1231.
FOLGER ADAM ELECTRIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Minimum/Medium D9300 ELECTRIC
MAXI-MORTISE™
Specify circled swing number when ordering.
A40 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Minimum/MediumD9300 ELECTRIC
MAXI-MORTISE™
FA Rev. 02-10 B1
For more information, please call 210.533.1231.
Folger Adam brand pneumatic locks arecharacterized by superior quality anddependability. Pneumatic locks utilizecompressed air power to operateefficiently, economically and safely. Eachmodel offers a wide range of features toallow customized function for specificsecurity requirements.
Qualification ofSecurity Levels___________The security level of a lock or otherhardware item is determined by itsability to endure in the specificenvironment in which it is used, thelevel of supervision within the areawhere it is installed, and a variety ofother factors. The terms minimum,medium and maximum are used todescribe the relative relationship ofproducts to one another.
Each lock on the following pages carriesa level of security designation or range.These designations are Southern FolgerDetention Equipment Company’sevaluation of the ability of the productto withstand the rigors probable in thatparticular security level. Key type,cylinder type, and overall strength andconstruction of the locks have beenconsidered in reaching the publishedlevels. Because of the number ofvariables affecting security level, thedesignations in this catalog should beconsidered as guidelines only.
Keys_____________________
All keys are registered before shipmentto allow prompt, accurate response torequests for additional or replacementkeys. To ensure the security of yourkeying system, keys are sold only to
properly authorized buyers. Keys aresold separately and are not included inthe price of the locks.
Prison Keys
Southern Folger’s standard policy doesnot allow master keying lever tumblerlocks. This is done for the protection ofthe end user.
� Lever tumbler locks have a limitednumber of usable keying combina-tions. Master keying reduces thenumber of combinations to three orfour, which drastically limits thechange key applications within afacility.
� Master keying lever tumbler locksrequires the bypass of four of the fivetumblers leaving only one tumbler toresist picking attempts. This wouldmake the remaining usablecombinations easy to pick.
� A master keyed lock is more easilypicked by an inmate/resident.
Keying Security__________Proper use and care of keys helps tomaintain overall security.
� Keys should be handled only by staffpersonnel.
� Keys should be stored in a lockedcabinet in the charge of an executiveofficer.
� Staff personnel should take care,when carrying keys in theperformance of daily duties, toconceal the bitted end of the key fromview of inmates. Key shields available.
� Keys should never be left in acylinder or out of reach of the officer.
Doors should be closed and lockedafter use and locks/keepers checkedfrequently for tampering or vandalism.
Doors left open for extended periodsshould be subject to lock and boltkeeper inspection to eliminateobstructions which may interfere withproper operation.
Templates________________Templates are issued on a job specificbasis only. Southern Folger does notissue registered template books.Templates will be issued upon receipt ofa valid purchase order and hardwareschedule.
Southern Folger reserves the right tomodify template information at any timeand without prior notice. When achange in templates occurs, material willbe shipped in accordance with thetemplates used for each specific job.
Dimensional drawings in this catalog arenot to be used for template information.
Electrical Indication______In systems using custom graphic panelsor electronic monitoring consoles,electrical indication is achieved byadding internal switches to the locks.These switches monitor the condition ofthe lock, indicating its locked orunlocked status. Details on specifyingthese switches are contained on eachproduct page.
IMPORTANT NOTE: When a door is open,the deadlock actuator of the lock may bemanually depressed, giving a falseindication that the door is closed andlocked. To eliminate this false indication, adoor position switch should be installedand wired in series with the indicationswitches of the lock. Then a “secure”indication may be produced only afterthree conditions have been met:
1) Deadlock actuator is depressed.
2) Latchbolt is extended.
3) The door is closed.
FOLGER ADAM PNEUMATIC LOCKS
INTRODUCTION
B2 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM PNEUMATIC LOCKS
PNEUMATIC LOCK SELECTIONGUIDE AND SECTION INDEX
Deadlatch Pin tumbler Swinging NS400P Min/Med B5-B6(Builders Hardware Cyl.)
Deadlatch Pin tumbler Swinging 120P Med/Max B7-B8(Mogul Cyl.)
Deadlatch Lever tumbler Swinging 51P Maximum B9-B10
LOCKTYPE
CYLINDERTYPE
DOORTYPE
APPLICABLESERIES
SECURITYLEVEL PAGE
The above is a generalized guideline only. To determine specific models required for your application, refer to product pages fordetailed descriptions.
FA Rev. 02-10 B3
For more information, please call 210.533.1231.
FOLGER ADAM PNEUMATIC LOCKS
PNEUMATIC LOCKAPPLICATION GUIDELINES
IMPORTANT NOTE: The above guidelines are not specific recommendations. The security of a particular door or group of doorsdepends upon not only hardware employed, but also supervision both direct and indirect. For questions on the application of aparticular lock, contact the factory.
BLANK PAGE
FA Rev. 02-10 B5
For more information, please call 210.533.1231.
Description______________NS400P Series Deadlatches are pin-tumbler, pneumatically-operated locksfor swinging doors. Specify buildershardware cylinders and keying asfollows:
NS402P Keyed one sideNS406P keyed both sides(See Optional Features for factory or customer-supplied key cylinders. Model NS400P, nocylinder supplied.)
Applications_____________Specify for minimum/medium securityswinging cell, corridor or administrationareas of institutions with 2" wide hollowmetal jamb construction.
Operation_______________A remote switch is used to control thelock pneumatically, or it may beoperated mechanically by buildershardware key cylinder. These locks offerthe convenience of remote, electricunlocking or locking and automaticdeadlocking when the door is closed.
Non-Fail-Safe Models
Unlock when solenoid is energized(1): by a momentary-contact switch.Latchbolt remains retractedmechanically until the door is opened.Upon opening the door the latchboltextends. The latchbolt is deadlockedmechanically when the door is closed.
Unlock when solenoid is energized(2): by a momentary-contact switch.Latchbolt is electrically held retracted aslong as control switch is tripped. (Nomechanical latchback). The door must
be opened while control switch is in the unlocked position. The latchbolt isdeadlocked when the door is closed. A maintained-contact switch will holdthe lock unlocked until the switch is released.
Standard Features_______� Instant solenoid actuation – Instant
bolt retraction provided by pneumaticcylinder.
� Compact size – Designed for hollowmetal frames with standard 2" face.
� Two-piece, twelve-pin plugconnector – Simplifies wiring, allowspre-wiring of the lock opening.
� Heavy duty lock mechanism –Designed with heavy duty, corrosion-resistant working parts tested over1,000,000 cycles.
� Stainless steel strike – Angled lip-type, furnished with tamper-resistantscrews. Requires less force to closeand lock the door.
� Mechanical latchback(Model NS400P-01) – Holds latchboltretracted until door opens.
� Mechanical unlocking by key –Offers manual control at the door inevent of power failure or at any othertime.
� Stainless steel latchbolt – 3/4" throw,hardened to resist sawing.
� Finish – US32D.� Indication switch – an internal switch
to monitor the positions of thedeadlock actuator. Signals deadlockedcondition.
Standards Compliance___All deadlatch models are UL1034Burglary-Resistant Mechanisms.
ASTM F-1577 Grade 1 – Impact.
FOLGER ADAM PNEUMATIC LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/Medium NS400P PNEUMATIC
DEADLATCHES
B6 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________� Manual air release system – Allows
for the manual release of door orgroups of doors from a remotelocation. Doors remain unlocked untilsystem is manually reset. SpecifyMARS.
� Builders hardware key cylinders –High security six-pin tumbler cylindermay be specified. Special keyingrequests will be accommodated, if possible.NOTE: Customer-supplied key cylinders maybe used to adapt NS400 Series locks to aspecific keying system. These cylinders musthave:
a) 1-5/32" diameter, full bar stockbodies.
b) 1-1/8" length, including cam.c) Standard, removable Yale-type cam.
Cylinders and all keys should be sent toSouthern Folger Detention EquipmentCompany. Required with LEK feature andcylinder extensions.
Customer is responsible for supplying theappropriate spacer ring(s). Any variationsfrom removable, Yale-type cam require specialpricing.
� Local electric key (LEK) – Inmate keyoperates lock electrically, staff keysalways operate the lock manually, andcan operate it electrically. Feature isenabled or canceled from a remotecontrol console.
� Inmate push button – Allowsoperation of the lock from inside theroom or cell, may be canceled fromcentral control console. A double-pole,double-throw switch is available foradditional functions.
� Key cylinder extension – Requiredwhen lock is keyed on the stop sideof the door frame. Five standardlengths are offered:Jamb CylinderSize Extension4-1/2" – 5" 4-3/4"5" – 6" 5-3/4"6" – 7" 6-3/4"7" – 8" 7-3/4"8" – 9" 8-3/4"
NOTE: Please specify appropriate cylinderextension length when ordering. Speciallengths may be provided for other jambthicknesses. Please contact factory for pricingand availability.
� Finish – Key Cylinder: US26D.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
Specifications_________� Lock case – Investment-cast
stainless steel.
� Latchbolt – Investment-caststainless steel, hardened.
� Latchbolt throw – 3/4".
� Operating lever – Stainless steel.
� Deadbolt lever/trigger bolt –Investment-cast stainless steel.
� Strike – Stainless steel stamping,angled lip.
ElectricalCharacteristics________� Pneumatic solenoid voltage –
24VDC with 1.5 watts power, consumption, self -return type.
� Indication switch – SPDT, UL listed.
� Rating – 5 amp @ 125 or 250 VAC.
FOLGER ADAM PNEUMATIC LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: Minimum/MediumNS400P PNEUMATIC
DEADLATCHES
MODEL NO.OPERATION
DESCRIPTIONINDICATION
SWITCHLATCHBACK LEK
OPTION MARSWITH WITHOUT
NS400P-01 1 X X Available Available
NS400P-04 2 X X Available Available
Feature/Option Chart_________________________________
FA Rev. 02-10 B7
For more information, please call 210.533.1231.
Description______________120P Series Deadlatches are pin-tumbler, pneumatically-operated locksfor swinging doors. Specify keying asfollows:
121 Keyed case side122 Keyed cover side126 Keyed both sides
Applications_____________Series 120P Deadlatches are suited for medium or maximum securityapplication including cell doors,sallyport or egress doors, corridor orentrance doors. Sensitive administrationareas of an institution may also warrant120 Series locks.
These jamb-mounted locks aredesigned to be controlled by anelectronic control system and providemonitoring of lock status for optimumprotection and flexibility.
Operation_______________Standard (1): Series 120P locks unlockwhen the pneumatic solenoid isenergized by a momentary-contactswitch. Once unlocked, the latchbolt isheld mechanically retracted until thedoor is opened. It then extendsautomatically.
Without latchback (1a), 04: Onceunlocked, the latchbolt is held retractedas long as the pneumatic solenoid isenergized. A maintained-contact switchmay be used to keep the latchboltretracted for an extended period oftime.
Knob release (2): 120P Deadlatchesmay be specified with knob release onone side, where the knob is alwaysactive. Knob may be mounted on thecase side or the cover side.
Key holdback (3): When unlocked bykey, the deadlatch remains retracteduntil relocked by turning the key in theopposite direction. Available one sideonly.
Testing__________________120P Series Deadlatches and Maxi-Mogul® Key Cylinders have been testedto 1,000,000 operations.
Standard Features_______� Indication switch – A lock status
switch monitors the latchboltextension and its deadlockedcondition.
� Pneumatic solenoid voltage –24VDC.
� Superior durability – Working partsof stainless steel afford greaterstrength, durability and corrosion-resistance.
� Standard lock size – All models usethe same size case, cover andmounting holes for simplifiedinstallation and frame preparation.
� External, two-piece plug connector(not shown) – All models installwithout cover removal. Simple plug-inconnection to field wiring.
� External air coupler – Allows airsystem connection to lock withoutremoving covers.
� External mounting holes – Easyinstallation eliminates the need forcover removal.
� Standard lock – Mounts behindframe and does not require afaceplate.
� 1" throw latchbolt – Offers greatersecurity. Each bolt is hardened toresist sawing. When latchbolt isengaged in strike, bevel is concealedto prevent picking.
� Mechanical unlocking by keys –Specify Folger Adam Maxi-Mogul®
high-security cylinders. � Investment-cast stainless
steel strike – Furnished with fourtamper-resistant screws.
� Finish – Zinc plated.
Standards Compliance___All Series 120P locks are UL1034Burglary-Resistant Mechanisms. Maxi-Mogul® key cylinders are UL437 listed.
ASTM F-1577 Grade 1 – Impact.
FOLGER ADAM PNEUMATIC LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum 120P DEADLATCH
Left handshown.
B8 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________� Local electric key (LEK) – A unique
function which uses two types of keysfor applications where inmates carrytheir own keys, but supervision isnecessary. One key turns in onedirection only, and operates the lockelectrically. The supervisory key turnsin both directions to operate the lockelectrically and mechanically. Theelectric operation may be canceledfrom a central console or controlpoint at any time via a three-positionswitch. The Maxi-Mogul® Key Cylinder isuniquely suited for this highfrequency operation, shown by cycletests of 1,000,000 operations.
� Key cylinder extension – When thelock is keyed on the stop side of thejamb, an extension eliminates theneed for a special, recessed framepocket. Specify E-3 for a 3" extension,E-4 for a 4" extension or E-5 for a 5"extension.
� Manual air release system – Allowsfor the manual release of doors orgroups of doors from a remotelocation. Latchbolt remains retracteduntil system is manually reset. SpecifyMARS.
� ASSA or MEDECO Mogul cylinders –Are available to match existing.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only and shouldnot be used as templates.
Specifications_________� Case and cover – 10 gauge steel.
� Latchbolt – Investment-caststainless steel, hardened 1"throw.
� Deadlock lever – Stainless steel, adjustable for door-gapvariations.
� Bolt opening – Does not allowaccess to mechanism.
� Roller bolt – Investment-caststainless steel with stainless steel roller.
� Operating lever – Stainless steelto operate with solenoid.
� Strike – Investment-cast stainlesssteel, attached with screws in twodirections.
� Springs – Stainless steel.
ElectricalCharacteristics________� Pneumatic solenoid voltage –
24VDC with 5.4 watts power consumption. 2.4 watts on MARSoption.
� Indication switch – Deadlockand auxiliary.
� Rating – 15 amps @ 125 or 250 VAC.
FOLGER ADAM PNEUMATIC LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Medium/Maximum120P DEADLATCH
MODEL NO.OPERATION
DESCRIPTION
LATCHBACK INDICATIONSWITCH
DEADLATCH
LEKOPTION MARS
WITH WITHOUT
120P-1-01 Standard (1) X X Available Available
120P-1-04 Standard (1a) X X Available Available
120P-2-01 Knob Release X X Available Available
120P-2-04 Knob Release X X Available Available
120P-3-01 Key Holdback X X No Available
120P-3-04 Key Holdback X X No Available
Feature/Option Chart_________________________________
FA Rev. 02-10 B9
For more information, please call 210.533.1231.
Description______________Series 51P Deadlatches are lever-tumbler, pneumatically-operated locksfor swinging doors. Specify keying asfollows:
52P Five-tumbler lock,keyed cover side.
52P-6 Six-tumbler lock,keyed cover side.
56P Five-tumbler lock,keyed both sides.
56P-6 Six-tumbler lock,keyed both sides.
Applications_____________51P Deadlatches are designed for jamb-mounted installation, and providemaximum security for heavily-used cell,corridor, or entrance doors. Theyprovide the convenience of slam-locking with remote unlocking.
Operation_______________Standard (1): When connected to amomentary-contact switch, the latchboltretracts when the pneumatic solenoid isenergized. Once retracted, the latchboltis held mechanically retracted until thedoor is opened. The latchbolt extendswhen the door is open.
Standard (1a): When connected to amaintained-contact switch, the latchboltretracts when the pneumatic solenoid isenergized. Once retracted, it is heldelectrically retracted for an extendedperiod of time. The latchbolt extendsonly when the door is open and thesolenoid is de-energized.
No-notch (2): Latchboltextends when the switchis selected to lock. (No-notch feature, seedescription on page B10.)
StandardsCompliance___All 51P Series Models areUL1034 listed as Burglary-Resistant Mechanisms.
ASTM F-1577Grade 1 – Impact.
StandardFeatures_______� Pneumatic solenoid
voltage – 24VDC.� Two-piece plug
connector – Simplifieswiring.
� External air coupler – Allows airsystem connection to lock withoutremoving covers.
� Instant solenoid operation –Dependable, continuous-dutypneumatic solenoid.
� Automatic deadlocking – When thelatchbolt is extended, it automaticallydeadlocks on closure.
� Full 3/4" bolt throw – Projects 1/4"when retracted.
� Mechanical unlocking by key –During power failure, or any time thelock unlocks by use of prisonparacentric key. Latchbolt remainsretracted until relocked by key.
� High security – 6-tumbler modeloffers greater pick resistance.
� Indication switch – A lock statusindication switch which monitors theextension of the latch bolt and thedeadlocked condition is included.
� Rugged construction – Case andcover are 7 gauge steel.
� Solid steel latchbolt – Latchbolt iszinc plated steel, concealed pins resistsawing.
� Deadlock actuator – Roller-type, zincplated steel, adjustable for variationsin door-to-jamb clearance.
� Finish – Zinc plated.
FOLGER ADAM PNEUMATIC LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 51P DEADLATCH
Righthandshown.
B10 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Optional Features________� Bolt projection – Standard 1/4" when
retracted 3/4" bolt throw. Consultfactory for other projections.
� No-notch feature – The holdbacklever has no notch to hold thelatchbolt mechanically retracted. Thelatchbolt extends in the lockedposition regardless of the position ofthe door.
� Interlocking – Accomplished throughthe control console.
� Manual air release system – Allowsfor the manual release of doors orgroups of doors from a remotelocation. Latchbolt remains retracteduntil system is manually reset. SpecifyMARS.
Specifications_________� Case and cover – 7 gauge steel.
� Latchbolt – Solid steel, with hardened steel roller pins.
� Deadlock actuator – Zinc platedsteel, roller-type.
� Lever tumblers – spring-temperbrass, activated by heavy phosphor-bronze springs.
� Key cylinder – One-piece,bronze alloy with paracentric keyway.
� Bolt size – 2" x 3/4".
� Bolt throw – 3/4"
ElectricalCharacteristics________� Pneumatic solenoid voltage –
24VDC with 5.4 watts power consumption; 2.4 watts on MARSoption.
� Indication switch – SPDT, ULListed.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only and shouldnot be used as templates.
FOLGER ADAM PNEUMATIC LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum51P DEADLATCH
OPERATION KEYING WITH INDICATIONSWITCH MARS
Standard (1)One Side 52PL Available
Two Sides 56PL Available
No-Notch (2)One Side 52PLNN Available
Two Sides 56PLNN Available
How to Specify________________________________________
NOTE: The above are standard 5-tumbler models. To specify 6-tumbler units, add 6 after the basicmodel number. Example: 52P-6-LL.
FA Rev. 02-10 C1
For more information, please call 210.533.1231.
Folger Adam brand mechanical locksare characterized by superior qualityand dependability. These locks havebeen proven by years of use in prisons,jails and detention facilities throughoutthe world. Each model offers specificfeatures to allow customized functionfor specific security requirements.
Qualification ofSecurity Levels___________The security level of a lock or otherhardware item is determined by itsability to endure in the specificenvironment in which it is used, thelevel of supervision within the areawhere it is installed, and a variety ofother factors. The terms minimum,medium and maximum are used todescribe the relative relationship ofproducts to one another.
Each lock on the following pages carriesa level of security designation or range.These designations are Southern FolgerDetention Equipment Company’sevaluation of the ability of the productto withstand the rigors probable in thatparticular security level. Key type,cylinder type, and overall strength andconstruction of the locks have beenconsidered in reaching the publishedlevels. Because of the number ofvariables affecting security level, the
designations in this catalog should beconsidered as guidelines only.
Keys_____________________All paracentric and Mogul keys areregistered before shipment to allowprompt, accurate response to requestsfor additional or replacement keys. To
ensure the security of your keyingsystem, keys are sold only to properlyauthorized buyers. Keys are soldseparately and are not included in theprice of the locks.
Prison Keys
Southern Folger’s standard policy doesnot allow master keying lever tumblerlocks. This is done for the protection ofthe end user.
� Lever tumbler locks have a limitednumber of usable keyingcombinations. Master keying reducesthe number of combinations to threeor four, which drastically limits thechange key applications within afacility.
� Master keying lever tumbler locksrequires the bypass of four of the fivetumblers leaving only one tumbler toresist picking attempts. This wouldmake the remaining usablecombinations easy to pick.
� A master keyed lock is more easilypicked by an inmate/resident.
Keying Security__________Proper use and care of keys helps tomaintain overall security.
� Keys should be handled only by staffpersonnel.
� Keys should be stored in a lockedcabinet in the charge of an executiveofficer.
� Staff personnel should take care,when carrying keys in theperformance of daily duties, toconceal the bitted end of the key fromview of inmates. Key shields available.
� Keys should never be left in acylinder or out of reach of the officer.
Doors should be closed and lockedafter use and locks/keepers checkedfrequently for tampering or vandalism.Doors left open for extended periodsshould be subject to lock and boltkeeper inspection to eliminateobstructions which may interfere withproper operation.
Templates________________Templates are issued on job specificbasis only. Southern Folger does notissue registered template books.Templates will be issued upon receipt ofa valid purchase order and hardwareschedule.
Southern Folger reserves the right tomodify template information at any timeand without prior notice. When achange in templates occurs, material willbe shipped in accordance with thetemplates used for each specific job.
Dimensional drawings in this catalog arenot to be used for template information.
Electrical Indication______Mechanical locks can provide indicationin systems using custom graphic panelsor electronic monitoring consoles. Thisis accomplished by the addition ofoptional indication switches locatedbehind the keeper or strike plate. Thisswitch will indicate the locked orunlocked condition of the door.
IMPORTANT NOTE: When a door is open,the switch may be depressed manually,giving a false indication that the door isclosed and locked. To eliminate this falseindication, a door position switch should beinstalled and wired in series with theindication switch. Then a “secure”indication may be produced only afterthree conditions have been met:
1) Indication switch button is depressed.
2) Latchbolt is extended.
3) The door is closed.
FOLGER ADAM MECHANICAL LOCKS
INTRODUCTION
C2 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Deadlocks Lever tumbler Swinging 10 Maximum C5-C6
80 Maximum C7-C8
FGM-80 Maximum C9-C10
Sliding 30D Maximum C11-C12
Deadlatches Lever tumbler Sliding 30 Maximum C11-C12
Swinging 70 Maximum C13-C14
60/60K Maximum C15-C16
Latches Lever tumbler Swinging 15 Medium C17
17 Medium C19
Pin tumbler 17-M Medium C20
Lock C21-C22Mountings
Cremone Sets Lever tumbler Swinging 3600, 3800 Maximum C23-C25
Keeper N/A Swinging Maximum C27Switches or Sliding
Mortise Pin tumbler Swinging D9300 Min/Medium C29-C36Deadlatches
A9300 Min/Medium C37-C46
FOLGER ADAM MECHANICAL LOCKS
MECHANICAL LOCK SELECTIONGUIDE AND SECTION INDEX
LOCKTYPE
CYLINDERTYPE
DOORTYPE
APPLICABLESERIES
SECURITYLEVEL PAGE
The above is a generalized guideline only. To determine specific models required for your application, refer to product pages fordetailed descriptions.
FA Rev. 02-10 C3
For more information, please call 210.533.1231.
FOLGER ADAM MECHANICAL LOCKS
MECHANICAL LOCKAPPLICATION GUIDELINES
IMPORTANT NOTE: The above guidelines are not specific recommendations. The security of a particular door or group of doorsdepends upon not only hardware employed, but also supervision both direct and indirect. For questions on the application of aparticular lock, contact the factory.
BLANK PAGE
FA Rev. 02-10 C5
For more information, please call 210.533.1231.
Description______________Series 10 Deadlocks are lever tumbler,mechanical locks for swinging doors.Specify keying as follows:
12 Five tumbler model,keyed cover side
12-6 Six tumbler model,keyed cover side
16 Five tumbler model,keyed both sides
16-6 Six tumbler model,keyed both sides
Applications_____________Series 10 Deadlocks are designed foruse on small swinging doors such asaccess panels, plumbing spaces, electricpanels or hatches which are infrequentlyused. They are not intended for use oncell doors. Specify handing whenordering.
Standard Features________� Mechanical operation – Locks and
unlocks by key. For key removal inlocked position only, specify a singlewing escutcheon on lock mounting oraccess door.
� Durable case – Ductile iron case,1/4" thick steel cover.
� Corrosion resistance – Working partsare corrosion resistant.
� Heavy-duty lever tumblers – Spring-temper brass tumblers, activated byheavy phosphor bronze springs.Precision fit to locking fence.
� Large, solid deadbolt – Zinc platedsteel, 1-1/2" x 3/4".
� Bolt throw – 5/8".
� Bolt projection – 1/2" or 1-1/4" standard.
� Investment-cast key cylinder –One-piece bronze alloy withparacentric keyway.
� Finish – Zinc plated.
Optional Features________� High security – Six tumbler model
offers greater pick resistance.
� Mounting – Hollow metal or platemounting.
Accessories______________(must be specified separately)
� 10-4B – Mortise Keeper andmounting screws.
� 10-4BL – Mortise Keeper Switch withmounting screws.
� 10-4DB – Mortise Keeper withdustbox and mounting screws.
� 10-4F – Surface Keeper and mountingscrews.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 10 DEADLOCK
Right hand shown.
C6 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
How to Order____________Specify:
1) Quantity
2) Handing
3) Bolt projection.
4) Mounting required.
5) Key code instructions.
6) Optional features/accessoriesrequired.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum10 DEADLOCK
EDIS POTS ETALP GNITNUOMEDIS EGNIH ETALP GNITNUOM
KEYEDBOTHSIDES
KEYEDHINGESIDE
KEYEDSTOPSIDE
KEYEDSTOPSIDE
KEYEDBOTHSIDES
KEYEDHINGESIDE
1 HLHR 32 HRHL 4
5 HLHR 76 HRHL 8
9 HRHL 1101 HLHR 12
Specify circled swing number when ordering.
LEGEND1-1/4" projection required with stop-side mounting.
FA Rev. 02-10 C7
For more information, please call 210.533.1231.
Description______________Series 80 Deadlocks are lever tumbler,mechanical locks for swinging doors.
82 Five tumbler model, keyed cover side
82-6 Six tumbler model, keyed cover side
86 Five tumbler model, keyed both sides
86-6 Six tumbler model, keyed both sides
Applications_____________Series 80 Deadlocks are designed foruse on cell doors, corridor doors,dormitory doors and dayrooms. Theyare also suited for storage rooms orlarge control cabinets. Specify handingwhen ordering.
Standard Features________� Mechanical operation – Locks and
unlocks by key. For key removal inlocked position only, specify a singlewing escutcheon on lock mounting oraccess door.
� Durable case – Ductile iron case,3/8" thick steel cover.
� Corrosion resistance – Working partsare corrosion resistant.
� Heavy-duty lever tumblers – Springtemper brass activated by heavyphosphor bronze springs. Precision fitto locking fence.
� Large, solid deadbolt – Zinc platedsteel with three hardened steel rollerpins to resist sawing, 2" x 3/4".Projects 1/2" when retracted.
� Bolt throw – 3/4"
� Bolt projection – 1/2" or 1-1/4" standard.
� Investment-cast key cylinder –One-piece, bronze alloy withparacentric keyway.
� Finish – Zinc plated for corrosionresistance.
Standards Compliance____ASTM F-1450 Grade 1
Optional Features________� High security – Six-tumbler model
offers greater pick resistance.
� Mounting – Hollow metal, plate orgrille mounting.
Accessories______________(must be specified separately)
� 80-4B – Mortise keeper andmounting screws.
� 80-4BL – Mortise keeper with switchand mounting screws.
� 80-4DB – Mortise keeper withdustbox and mounting screws.
� 80-4F – Surface mounted keeperand mounting screws.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 80 DEADLOCK
Right hand shown.
C8 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
How to Order____________Specify:
1) Quantity
2) Handing
3) Bolt projection.
4) Mounting required.
5) Key code instructions.
6) Optional features/accessoriesrequired.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum80 DEADLOCK
EDIS POTS ETALP GNITNUOMEDIS EGNIH ETALP GNITNUOM
KEYEDBOTHSIDES
KEYEDHINGESIDE
KEYEDSTOPSIDE
KEYEDSTOPSIDE
KEYEDBOTHSIDES
KEYEDHINGESIDE
1 HLHR 32 HRHL 4
5 HLHR 76 HRHL 8
9 HRHL 1101 HLHR 12
LEGEND
Specify circled swing number when ordering.
1-1/4" projection required with stop-side mounting.
FA Rev. 02-10 C9
For more information, please call 210.533.1231.
Description______________Model FGM-80 Deadlock is a levertumbler, 80 Series mechanical lock forswinging chain link fence gates. Specifykeying as follows:
FGM-82 Five tumbler modelkeyed cover side
FGM-82-6 Six tumbler model,keyed cover side
FGM-86 Five tumbler model,keyed both sides
FGM-86-6 Six tumbler model,keyed both sides
Applications_____________FGM-80 Deadlocks are designed for usein outdoor applications to secureswinging fence gates. Specify handingwhen ordering.
Standard Features________� Mechanical operation – Locks and
unlocks by key. For key removal inlocked position only, specify singlewing escutcheon.
� Durable construction – Ductile ironcase, 3/8" thick steel cover.
� Tamper resistant mounting –Formed from 7 gauge steel withbreak-off-head security screws.
� Corrosion resistance – Working partsare corrosion resistant.
� Heavy duty lever tumblers – Spring-temper brass, activated by heavyphosphor bronze springs. Precision fitto the locking fence.
� Large, solid deadbolt – Zinc platedsteel, 2" x 3/4" with three hardenedsteel roller pins to resist sawing. Boltis flush with mounting whenretracted.
� Bolt throw – 3/4"
� Investment-cast key cylinder –One-piece, bronze alloy withparacentric keyway.
� Finish – All exposed lock componentsand mounting hardware zinc platedfor exterior application.
� Supplied – With front bar andcylinder shield one or both sides, and zinc plating.
Accessories______________(must be specified separately)
� 80-4H – Fence gate lock keeper, zincplated finish.
� Pull(s) – #2 Pulls may be added toone or both sides of the mounting.
FOLGER ADAM MECHANICAL LOCKSKey: Prison ParacentricDoor: Swinging
Fence GateSecurityLevel: Maximum FGM-80
Fence Gate Lock/Mounting
Left hand shown.80-4H
C10 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
How to Order____________Specify:
1) Quantity
2) Handing
3) Key code instructions.
4) Optional features/accessoriesrequired.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: Prison ParacentricDoor: Swinging
Fence GateSecurityLevel: MaximumFGM-80
Fence Gate Lock/Mounting
EDIS POTS ETALP GNITNUOMEDIS EGNIH ETALP GNITNUOM
KEYEDBOTHSIDES
KEYEDHINGESIDE
KEYEDSTOPSIDE
KEYEDSTOPSIDE
KEYEDBOTHSIDES
KEYEDHINGESIDE
1 HLHR 32 HRHL 4
5 HLHR 76 HRHL 8
9 HRHL 1101 HLHR 12
LEGEND
Specify circled swing number when ordering.
1-1/4" projection required with stop-side mounting.
FA Rev. 02-10 C11
For more information, please call 210.533.1231.
Description______________Series 30 locks are Deadlatches. Series30D Deadlocks are lever tumbler,mechanical locks for sliding doors.Specify keying as follows:
32 Keyed cover side
36 Keyed both sides
32D Keyed cover side
36D Keyed both sides
Applications_____________Series 30 Deadlatches arerecommended for sliding doorsrequiring slam-locking, such as corridoror entrance doors. Doors should neverbe left unattended in open position. Notfor use on cells. Specify handing.
Series 30D Deadlocks arerecommended for use on sliding cell,corridor or entrance doors. Ideal fordoors left open or unattended at times.
Standard Features_______� Automatic deadlocking
(Series 30) – Deadlocks on doorclosure, unlocks by key. Key isremovable in the latch position only.
� Mechanical operation (Series 30D) – Deadlocks andunlocks by key. Key is removable inboth locked and unlocked condition.
� Durable case – Ductile iron case with3/16" thick steel cover.
� Corrosion resistance – Working partsare corrosion resistant.
� Heavy-duty lever tumblers – 5 spring-temper brass tumblers,activated by heavy phosphor-bronzesprings. Precision fit to locking fence.
� Large, solid hookbolt – Zinc plated,hardened steel, 1/2" thick.
� Bolt movement – 5/8" lift.
� Investment-cast key cylinder –One-piece bronze alloy withparacentric keyway.
� Finish – Zinc plated.
Optional Features________� Mounting – Hollow metal, grille or
plate door mounting.
Accessories______________(must be specified separately)
� 30-4B – Mortise keeper withmounting screws.
� 30-4BL – Mortise keeper with switchand mounting screws.
� 30-4DB – Mortise keeper withdustbox and mounting screws.
� 30-4F – Surface mounted keeper andmounting screws.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Sliding
SecurityLevel: Maximum
30 Series DeadlatchRight hand shown.
30D Series DeadlockRight hand shown.
30/30D LOCKS
C12 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
How to Order____________Specify:
1) Quantity
2) Handing
3) Mounting required.
4) Key code instructions.
5) Accessories required.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: Prison Paracentric
Door: Sliding
SecurityLevel: Maximum30/30D LOCKS
30D Deadlock 30 Deadlatch
36KEYEDBOTHSIDES
LOCK MOUNTING TRACK SIDE
35 RH LOCK & MOUNTING LH 63
32KEYEDTRACKSIDE
37 RH LOCK & MOUNTING LH 83
LEGEND
Specify circled swing number when ordering.
FA Rev. 02-10 C13
For more information, please call 210.533.1231.
Description______________Series 70 Locks are lever tumblermechanical locks for swinging doors.Specify keying as follows:
72 Keyed cover side
76 Keyed both sides
Applications_____________Series 70 Deadlatches arerecommended for heavily used doorssuch as those in dayrooms, recreationareas or dining rooms. Convenientslam-locking. Specify handing.
Standards Compliance___UL10-B listed as Fire Door Accessory, 3-hour rating with strike.
Standard Features_______� Automatic deadlocking – Locks
when door is closed; unlocks by key.
� Deadlock actuator – 3/4" x 3/4" colddrawn steel with zinc plated finish.
� Durable case – Ductile iron case with3/8" steel cover.
� Corrosion-resistance – Working partsare corrosion-resistant.
� Heavy duty lever tumblers –5 spring-temper brass tumblers,activated by heavy phosphor-bronzesprings. Precision fit to locking fence.
� Large, solid latchbolt – Zinc platedsteel, 2" x 3/4" with two hardenedsteel roller pins to resist sawing. Boltprojects 1/2" when retracted.
� Bolt throw – 3/4"
� Bolt projection – 1/2" and 1-1/4" arestandard. Specify one.
� Investment-cast key cylinder –One-piece bronze alloy withparacentric keyway.
� Finish – Zinc plated.
Optional Features________� Mounting – Hollow metal, grille or
plate.
Accessories______________(must be specified separately)
� 70-4B – Mortise strike with mountingscrews.
� 70-4BL – Mortise strike withswitch/mounting screws.
� 70-4DB – Mortise strike with dust boxand mounting screws.
� 70-4F – Surface-mounted keeper andmounting screws.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 70 DEADLATCH
Right hand standard bevel shown.
How to Order____________Specify:
1) Quantity
2) Handing
3) Bolt projection.
4) Mounting required.
5) Key code instructions.
6) Accessories required.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
C14 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM MECHANICAL LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum70 DEADLATCH
KEYEDBOTHSIDES
KEYEDHINGESIDE
KEYEDSTOPSIDE
KEYEDSTOPSIDE
KEYEDBOTHSIDES
KEYEDHINGESIDE
EDIS POTS ETALP GNITNUOMEDIS EGNIH ETALP GNITNUOM
13 BSHLBSHR 14
17 BSHLBSHR 18
21 BRHRBRHL 22 23 BSHLBSHR 24
19 BRHRBRHL 20
15 BRHRBRHL 16
LEGEND
Specify circled swing number when ordering.
1-1/4" projection required with stop-side mounting.
FA Rev. 02-10 C15
For more information, please call 210.533.1231.
Description______________Series 60 Locks are lever tumbler,mechanical locks for swinging doors.Series 60 Locks are key operated only.Series 60K Locks also have a knob setwhich is active when the lock is notdeadlocked. Specify keying as follows:
62 Keyed cover side66 Keyed both sides62K Knob model keyed cover side66K Knob model keyed both sides
Applications_____________Series 60 Locks are ideal for use oncorridor, cell, dining room orrecreational area doors. Series 60KLocks with knobs are suited foradministrative or infirmary areas wherestaff personnel require the convenienceof knob operation combined with slam-locking and the security of a deadlock.Specify handing.
Standards Compliance___ UL listed as Fire Door Accessory, 3 hourrating with strike. Single or pair of doorswith 3 hour rating.
Standard Features_______� Knob operation (Series 60K) – Knob
will operate latchbolt unlessdeadlocked.
� Mechanical operation – Locks andunlocks by key. A half-turn of the keyunlocks, and a full turn of the key, inthe opposite direction, deadlocks thelatchbolt. Key is removable in thedeadlocked and latched position.
� Automatic snap-locking –Automatically when door is closed.
� Durable case – Ductile iron case with3/8" thick steel cover.
� Corrosion-resistance – Working partsare corrosion-resistant.
� Heavy-duty lever tumblers –5 spring-temper brass tumblers,activated by heavy phosphor-bronzesprings. Precision fit to locking fence.
� Large solid latchbolt – Zinc platedsteel, 2" x 3/4" with two hardenedsteel roller pins to resist sawing. Boltprojects 1/2" when retracted.
� Bolt throw – 3/4"
� Bolt projection – 1/2" or 1-1/4" arestandard. Use 1-1/4" projectionfor stop side mounting.
(continued)
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 60/60K Latch and Key
Operated Deadlocks60 Series DeadlockRight hand standard bevel shown.
60K Series DeadlockRight hand standard bevel shown.
Combination Knob
C16 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Standard Features________� Investment-cast key cylinder –
One-piece bronze alloy withparacentric keyway.
� Knobs and roses (Series 60K) –US26D finish attached to a 3/8"square spindle by exposed set screwson one side, and a concealed cross-pin on the other. Knobs are providedfor both sides unless specifiedotherwise.
� Finish (Series 60K) – Trim satinchrome US26D, zinc plated forcase/cover.
Optional Features________� Mounting – Hollow metal, grille or
plate.� Single knob (60K Series)� Safety knob set (60K Series) –
Specify “SK” for safety knob one side.“Double SK” for safety knob on bothsides.
Accessories______________(must be specified separately)� 60-4B – Mortise strike and mounting
screws.� 60-4BL – Mortise strike with switch
and mounting screws.� 60-4DB – Mortise strike with dust box
and mounting screws.� 80-4F – Surface-mounted keeper and
mounting screws.
How To Order____________Specify:
1) Quantity
2) Handing
3) Bolt projection
4) Location of single knob, hingeside or stop side.
5) Mounting required.
6) Key code instructions.
7) Accessories required.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum60/60K Latch and Key
Operated Deadlocks
KEYEDBOTHSIDES
KEYEDHINGESIDE
KEYEDSTOPSIDE
KEYEDSTOPSIDE
KEYEDBOTHSIDES
KEYEDHINGESIDE
EDIS POTS ETALP GNITNUOMEDIS EGNIH ETALP GNITNUOM
13 BSHLBSHR 14
17 BSHLBSHR 18
21 BRHRBRHL 22 23 BSHLBSHR 24
19 BRHRBRHL 20
15 BRHRBRHL 16
Specify circled swing number when ordering.
LEGEND
60 right hand shown.
60K right hand shown.
(continued from previous page)
FA Rev. 02-10 C17
For more information, please call 210.533.1231.
Description______________No. 15 Latches are lever tumbler,mechanical locks for small swingingdoors, keyed one side only.
Applications_____________ No. 15 Latches are ideal for use onobservation panels, wicket or othersmall doors or covers. The latch isconcealed by the case to preventtampering when closed. Not for use onfull size doors.
Standard Features_______� Mechanical operation – Unlocks by
key, locks when door is closed.
� Automatic snap-locking –Automatically when door is closed.
� Durable case – Ductile iron case with1/4" thick steel cover.
� Corrosion-resistance – Working partsare corrosion-resistant.
� Heavy-duty lever tumblers –5 spring-temper brass tumblers,activated by heavy phosphor-bronzesprings. Precision fit to locking fence.
� Large solid latchbolt – Investmentcast, stainless steel, 1" x 7/16", fullyconcealed.
� Bolt throw – 7/16"
� Investment-cast key cylinder –One-piece bronze alloy withparacentric keyway.
� Security screws – Supplied withangled strike and four 1/4-20 x 1-1/2"flat head security screws. Lockboltkeeper sold separately.
� Finish – Zinc plated.
How To Order____________Specify:
1) Quantity
2) Mounting required.
3) Key code instructions.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Medium 15 LATCH
BLANK PAGE
FA Rev. 02-10 C19
For more information, please call 210.533.1231.
Description______________Number 17 Latches are lever tumbler,mechanical locks for small, swingingdoors, keyed one side only.
Applications_____________ Number 17 Latches are designed for useabove hinged food pass doors, onobservation panels or other small doors.Not for use on full size doors. Specifyhanding.
Standard Features_______� Mechanical operation – Unlocks by
key.
� Automatic snap-locking – Whendoor is closed.
� Durable case – Ductile iron case with1/4" steel cover.
� Corrosion resistance – Working partsare corrosion resistant.
� Heavy-duty lever tumblers –5 spring-temper brass tumblers,activated by heavy phosphor bronzesprings. Precision fit to locking fence.
� Large solid latchbolt – Investment-cast, stainless steel 1" x 7/16" flushwhen retracted.
� Bolt throw – 7/16"
� Investment-cast key cylinder –One piece bronze alloy withparacentric keyway.
� Security screws – Four 1/4-20 x 1-1/2" flat head security screws formounting.
� Finish – Zinc plated.
Optional Features________� Hollow metal mounting - Combined
with 1/2" bolt projection for in-the-door pocket mounting. Requires17-HM mounting.
� Turn piece – Key not required.Specify “17-TP”.
� Square bolt – Flush and 1/2"projection stainless steel square boltfor special applications. Specify “17-D”for square bolt deadlatch.
� Deadbolt action – Mechanismmodified to act like a deadbolt. Keyremovable in locked position only.Specify “17-DW” for square boltdeadbolt.
Accessories______________(must be purchased separately)
� 17-4F – Keeper/pull for surfacemounted lock.
� 17-4FPD – Plate food pass door withkeeper (specify 3FP hingesseparately).
� 17-HM – Hollow metal mounting forhollow metal food pass door. Requires1/2" bolt projection.
How To Order____________Specify:
1) Quantity
2) Handing
3) Mounting required.
4) Key code instructions.
5) Accessories required.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Medium 17 LATCH
Righthandreverse bevelshown.
C20 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Description______________Specifically designed for food-pass doorapplications, the 17-M Latch offers thestrength of our original 17 Series Latchcombined with the high technology ofMaxi-Mogul® cylinder operation. Now,staff need only carry Mogul-type keys.Surface or hollow metal mountingsavailable. A 17-4F keeper should bespecified to capture the latchbolt andprotect it from tampering when surfacemounted.
17-M0 110 Mogul cylinder -keyed cover side
17-M1 190 Maxi-Mogul® - keyed cover side
Applications_____________ Ideal for food-pass doors, small wicketdoors or observation panels. 17-M0 and17-M1 latches are designed to mountabove the door and snap-lock instantlyon closure. These latches are specifiedwith either the 110 Mogul, or exclusive190 Maxi-Mogul® cylinder as needed.
When Maxi-Mogul® cylinders arespecified, level 1 keying will beprovided.
Standard Features_______� Maxi-Mogul® key cylinder –
Provides maximum pick resistance.UL437 listed.
� Case – Ductile iron.
� Corrosion-resistant – Working partsare corrosion-resistant.
� Latchbolt throw – 7/16". Flush whenretracted, or 1/2" projection forhollow metal pocket installation.
� Large, solid latchbolt – Investment-cast stainless steel, 1" x 7/16".
� Security screws – Supplied with four1/4-20 x 1-1/2" flat head securityscrews.
� Finish – Zinc plated.
Optional Features________� Square bolt – Flush and 1/2"
projection stainless steel square boltfor special applications.
� 110 Mogul key cylinder – Forexisting applications.
� Cylinder finish – US26D
� Hollow metal mounting – Combinedwith 1/2" bolt projection for in-the-door pocket mounting.
� Keying – Master keying is available.
Accessories______________(must be purchased separately)
� 17-4F – Keeper/pull for surfacemounted lock.
� 17-4FPD – Food pass door with 17-4keeper/pull (specify 3FP hingesseparately).
How To Order____________Specify:
1) Quantity
2) Handing
3) Cylinder
a. 17-M1 for Maxi-Mogul®
key cylinder.
b. 17-M0 allows cylinder to be keyedto existing Mogul combinations.
4) Latch mounting requirements.
5) Key code instructions.
6) Accessories required.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: MogulDoor: Food-pass
SwingingSecurityLevel: Medium
DIMENSION MAXI-MOGUL® MOGUL
A 1-3/8" 1-1/8"
B 2-5/8" 2-3/8"
17-M LATCH
Right handreverse bevel shown.
FA Rev. 02-10 C21
For more information, please call 210.533.1231.
Description______________Detention locks should be enclosed insteel coverings to prevent tamperingand abuse. They are removable forservice.
Standard Features_______� Rugged construction – 7 gauge steel.
� Keying flexibility – May be furnishedfor locks keyed one or two sides.
� Bolt projection – Flush afterinstallation.
� Supplied – With one No. 1Escutcheon and all necessarymounting screws.
� Finish – Zinc plated.
Optional________________Cylinder shields can be ordered withmountings.
Models Available________� Model G – For weldment to flat
horizontal bars of a grille door. Thelock is installed to the inside of theback plate, and covered by a frontplate secured by break-off-headsecurity screws. Specify lock type,handing and thickness of grille doorflat bar.
Specify with Series 30, 60, 70 or 80Locks.
� Model HM – A specially designedplate to which a lock is installed. Theplate then covers the lock pocket in ahollow metal door. This mounting isnot removable when the door islocked. In stop-side applications, alonger bolt projection is required, andmust be specified. Specify lock type,handing and hollow metal doorthickness. A 1/8" spacer is usedbetween lock and mounting for 2"thick doors.
Specify with Series 10, 17, 30, 60, 70or 80 Locks.
� Model P – For rim mounting a lockto the surface of a plate door. Thelock installs to the inside of themounting, and is then attached to thedoor. Specify handing.
Specify with Series 10, 30, 60, 70 or80 Locks.
FOLGER ADAM MECHANICAL LOCKS
LOCK MOUNTINGS
G Lock MountLeft hand shown.
HM Lock MountLeft hand shown.
P Lock MountRight hand shown.
C22 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
How To Order____________When ordering mountings, specifyhinge or stop side location of mountingplate. Cylinder shields can be orderedwith mountings.
Dimensional Data________
FOLGER ADAM MECHANICAL LOCKS
LOCK MOUNTINGMODEL G MODEL HM MODEL P
HEIGHT WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT WIDTH DEPTH
With 10 Series lock N/A N/A N/A 5" 7" 3/16" 7-1/4" 5-1/4" 1-7/16"
With 30 Series lock 11-1/2" 10-3/8" 2" 12" 6-1/2" 3/16" 13-1/2" 6-11/16" 1-3/4"
With 60 Series lock 11-1/2" 10-3/8" 2" 7" 10" 3/16" 8-1/2" 9-3/8" 1-3/4"
With 70 Series lock 11-1/2" 10-3/8" 2" 7" 10-3/8" 3/16" 9-3/4" 9-7/8" 1-3/4"
With 80 Series lock 11-1/2" 10-3/8" 2" 7" 10" 3/16" 8-1/2" 9-3/8" 1-3/4"
With 17-M Latch N/A N/A N/A 5" 5-1/2" 3/16" N/A N/A N/A
LOCK MOUNTINGS
FA Rev. 11-12 C23
For more information, please call 210.533.1231.
Description______________Series 3600 Cremone Bolt Sets are levertumbler mechanical deadlocks for singleor paired swinging doors. They providethe convenience of slam-locking and thesecurity of a deadlock.
3620 Keyed one side
3660 Keyed both sides
Series 3800 Cremone Bolt Sets are levertumbler, mechanical deadlocks forsingle or paired swinging doors.Cremone bolts provide three-pointlocking for the active or single door,and five point locking for paired doors.
3820 Keyed one side
3860 Keyed two sides
(see model selection chart on back)
Applications_____________Cremone locks are designed formaximum security on corridor,entrance, or armory doors which maybe subject to mass attack. Specify foruse with hollow metal or grille doors.Specify handing.
Standard Features_______� Series 3600 mechanical operation –
Active door unlocks with a half-turn ofthe key. A full turn of the key in theopposite direction, deadlocks thecenter latchbolt, which also deadlocksthe head and foot bolts.
� Series 3800 mechanical operation –Active door is operated by a keywhich deadlocks the deadbolt, headand foot bolts. Inactive door isoperated from its own cylinder whichdeadlocks head and foot bolts.
� Lever handle operation – Head andfoot bolts are operated by thehandles, except when they are indeadlocked condition.
� Door types – Models available foruse with 2" or thicker grille doorsplug welded to flat, horizontal bars. Inhollow metal doors 1-3/4" thick ormore, bolt set mounts in a pocketwith head and foot bolt concealedwithin door. (Specify door thicknesswhen ordering.)
� Head and foot bolts – 7/8" diametersteel. (Specify overall door openingheight when ordering.)
� Durable case and cover – 7 gaugesteel.
� Corrosion resistance – Working partsare corrosion resistant.
� Heavy-duty lever tumbler –5 spring-temper brass tumblers,activated by heavy phosphor bronzesprings. Precision fit to locking fence.
� Large solid bolt – Zinc plated steel,2" x 3/4". Flush when retracted.
� Bolt throw – 3/4" at all three points.
� Investment-cast key cylinder –One-piece bronze alloy withparacentric keyway.
� Rugged lever handles – Steelhandles and escutcheons on bothsides.
� Supplied – with head and foot bolts,foot bolt receptacle(s), Escutcheon(s),and necessary mounting screws.
� Finish – Zinc plated.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum
Foot BoltReceptacle
3600 or 3800 SeriesLeft hand active leaf
3600 and 3800CREMONE BOLTS
C24 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Accessories______________(must be specified separately)
� 60/80-4B – Mortise center boltkeeper and mounting screws forsingle door only.
� 60/80-4BL – Mortise center boltkeeper with switch and mountingscrews for single door only.
� 60/80-4DB – Mortise center boltkeeper with dustbox and mountingscrews for single door only.
� 3S-4B – Mortise head bolt keeper andmounting screws for single or doubledoors.
� 3S-4BL – Mortise head bolt keeperwith switch and mounting screws forsingle or double doors.
� 3S-FBR – Additional foot boltreceptacle may be used for hold-openposition.
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
How To Order____________Specify:
1) Quantity
2) Handing
3) Mounting required.
4) Key code instructions.
5) Accessories required. Model Selection Chart
FOLGER ADAM MECHANICAL LOCKS Key: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum3600 and 3800
CREMONE BOLTS
MODEL DESCRIPTION KEYED DOOR TYPE
36/3821G Single One side Grille
36/3822G Double One side Grille
36/3861G Single Two sides Grille
36/3862G Double Two sides Grille
36/3821HM Single One side Hollow metal
36/3822HM Double One side Hollow metal
36/3861HM Single Two sides Hollow metal
36/3862HM Double Two sides Hollow metal
MOUNTING A B C
Hollow Metal 1-7/8" 18" 9-1/2"
Grille 1-7/8" 17-1/4" 8"
3800 SeriesActive leaf
60/80-4BL 60/80-4DB
60 Series have strike lips.
3S-FBR 3S-4BL
FA Rev. 09-13 C25
For more information, please call 210.533.1231.
FOLGER ADAM MECHANICAL LOCKSKey: Prison Paracentric
Door: Swinging
SecurityLevel: Maximum 3600 and 3800
CREMONE BOLTS
KEYEDBOTHSIDES
KEYEDBOTHSIDES
3600 SERIES LATCHBOLT AND 3800 SERIES DEADBOLT CREMONESFor Single and Double Doors
EDIS EGNIH REVOC ELBAVOMEREDIS POTS REVOC ELBAVOMER78 3861 LH DEADBOLT RH 79
3661 LHRB LATCHBOLT RHRB80 3861 RH DEADBOLT LH 81
3661 RHSB LATCHBOLT LHSB
KEYEDSTOPSIDE
KEYEDHINGESIDE
82 3821 LH DEADBOLT RH 833621 LHRB LATCHBOLT RH
84 3821 RH DEADBOLT LH 853621 RHSB LATCHBOLT LHSB
KEYEDBOTHSIDES
KEYEDBOTHSIDES
86 3862 LH DEADBOLT ACTIVE3662 LHRB LATCHBOLT ACTIVE
A
87 3862 RH DEADBOLT ACTIVE3662 RHSB LATCHBOLT ACTIVE
A
KEYEDBOTHSIDES
KEYEDBOTHSIDES
88 3862 RH DEADBOLT ACTIVE3662 RHRB LATCHBOLT ACTIVE
A
89 3862 LH DEADBOLT ACTIVE3662 LHSB LATCHBOLT ACTIVE
A
KEYEDSTOPSIDE
KEYEDHINGESIDE
90 3822 LH DEADBOLT ACTIVE3622 LHRB LATCHBOLT ACTIVE
A
91 3822 RH DEADBOLT ACTIVE3622 RHSB LATCHBOLT ACTIVE
A
KEYEDSTOPSIDE
KEYEDHINGESIDE
92 3822 RH DEADBOLT ACTIVE3622 RHRB LATCHBOLT ACTIVE
A
93 3822 LH DEADBOLT ACTIVE3622 LHSB LATCHBOLT ACTIVE
A
A INDICATES ACTIVE SIDE
NOTE: The above illustrations show latchbolts for all models. 3800 Series aredeadbolt locks, 3600 Series are latchbolt locks.
A INDICATES ACTIVE SIDE
Specify circled swing number when ordering.
LEGEND
BLANK PAGE
FA Rev. 02-10 C27
For more information, please call 210.533.1231.
Description______________Electrical indication switches monitorthe locked or unlocked condition of adoor.
Applications_____________Specify for use with any mechanicallock. The switch installs behind thekeeper or strike, and provides indicationof door status to a remote controlconsole.
NOTE: Used alone, this switch may bemade to create a false signal by depressingthe switch button manually. The possibilityof a false signal should be eliminated byinstalling a door position switch and wiringit in series with the indication switch. In thisapplication, a secure signal can be producedonly after three conditions have been met:
1) the indication switch buttonis depressed.
2) the lockbolt is extended.
3) the door is closed.
FOLGER ADAM MECHANICAL LOCKS
KEEPER SWITCHES
MODEL NO. USED WITH LOCK
10-4BL 10 Series deadlocks
30-4BL 30/30D Series deadlock
60-4BL 60 Series deadlock
70-4BL 70 Series deadlatches
80-4BL 80 Series deadlocks
3S-4BL 3800 Series Cremone headbolts
ASSW-104A 9300 Series
SWITCH TYPE RATING
15 amps @ 125 , 250 VAC.5 amp @ 125 VDC.25 amp @ 250 VDC
80-4BL
ASSW-104A
Electrical Specifications_________________Models Available_______________________
Single-pole,Double-throw(SPDT)
BLANK PAGE
FA Rev. 02-10 C29
For more information, please call 210.533.1231.
Description______________Series D9300 locks are pin tumblermortise locks for swinging doors.
Applications_____________ An extra heavy-duty mortise lock for use on swinging doors in minimum/medium security cell or public areas ofdetention facilities. Available in a varietyof latchbolt, deadbolt and deadlockinglatchbolt styles.
Standards Compliance___UL10B listed as Fire Door Accessory, 4 hour rating.
UL437 Listed Cylinder
ASTM F-1577 Grade 1 – Impact
Standard Features_______� Fits ANSI door preparation –
Standardized installation inhollow metal doors modified toaccommodate lock bodythickness of 1-1/8".
� Door thickness – Doors must be 1-3/4" to 2-1/2" thick.
� Armored front – 8" x 1-1/4" steel, 10 gauge.
� High strength case and cover –12 gauge.
� Corrosion-resistant working parts –Internal working parts are stainlesssteel or zinc chromated steel.
� Durable hubs – Solid stainless steelconstruction, on the square.
� Spindle – 11/32" cold drawn steel.
� Latchbolt – One-piece investmentcast 17-4 stainless steel, hardened,3/4" throw.
� Deadbolt – One-piece investmentcast 17-4 stainless steel, hardened, 1" throw.
� Latchbolt size – 11/16" x 1-1/4".
� Deadbolt size – 11/16" x 1-1/2".
� Reversible – Locks are fieldreversible. Handing, if known, shouldbe specified upon ordering.
� Key cylinder – Price includes mogulcylinder.
� Screws – Tamper-resistant mountingscrews.
� Tamper-resistant – All bolts,including the auxiliary latchbolt, arefully tunneled to help preventjamming of the mechanism withforeign material.
� Strike – Supplied with curved-lipstrike having 1-1/4" lip length anddust box. Buffed stainless steel finishonly.
� Trim finish – US32D(ANSI/BHMA 630).
Optional Features________� Strike switch – Strike-mounted
indication switch for electricallymonitored systems.
� Cylinder – Available with 110 Mogulor 190 Maxi-Mogul® key cylinderprovides maximum pick-resistanceand matches keying on your job.Maxi-Mogul® UL437, Level 1 listed.
� ASSA or MEDECO Mogul cylinders –Available to complement keyingsystems.
FOLGER ADAM MECHANICAL LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Minimum/Medium D9300 MAXI-MORTISE™
Shown without LeverTrak®
C30 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Trim Designs_____________� Knobs – standard trim US26D.
Specify KR for knob and rose trimwith lock.Dimensions: 2-1/4" diameter.Safety knob: Specify “SK” knob andside installed on.
� Lever handles – all Lever handlesmust be installed with track.
Material: Stainless steel.
Dimensions: 3/4" diameter x 4-11/16"long.
� Roses –Material: Stainless steel.Dimensions: 2-11/16" diameter,concealed trim design.
� LeverTrak® Handle Guide Sets – LTand LTE Handle Guide Sets must bespecified. The track prevents damageto mortise locks from over-travel ofthe handle.Material: Stainless steel.
FOLGER ADAM MECHANICAL LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Minimum/MediumD9300 MAXI-MORTISE™
KR – Knob handle and rose SK – Safety knob (inside)
LT – Lever handles and track setThe “Lemont”
LTE – Lever handles, track set and escutcheon
The “Limited”
D9301 (F01) – Passage or closed latch� Either handle operates the latchbolt at all
times.
D9304 (F04) – Entry lock� Latchbolt operated by handle either side
except when outside handle is madeinoperative by inside thumbturn.
� When outside handle is locked, latchboltoperated by key outside, handle inside.
� Auxiliary deadlatch.
D9305 (F05) – Classroom lock� Latchbolt operated by handle either side,
except when outside handle is locked by keyoutside.
� Inside handle is always operative.� Auxiliary deadlatch.
D9307 (F07) – Storeroom or closet lock� Latchbolt operated by key outside, handle
inside.� Outside handle inoperative at all times.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9309 (F09) – Apartment, exit or toilet lock� Latchbolt operated by handle either side
except when outside handle is locked by keyfrom inside.
� When outside handle is locked, latchbolt isoperated by key outside, handle inside.
� Auxiliary deadlatch.
D9313 (F13) – Dormitory or exit lock� Latchbolt operated by lever from either side.� Deadbolt projected by key outside, and
thumbturn inside.� Both bolts retracted by inside lever.
FA Rev. 02-10 C31
For more information, please call 210.533.1231.
FOLGER ADAM MECHANICAL LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Minimum/Medium D9300 MAXI-MORTISE™
D9300 Series Lock Functions
D9314 (F14) – Store door lock� Latchbolt operated by handles either side.� Deadbolt operated by key both sides.
D9335 (F15 Mod.) – Modified hotel guest lock� Latchbolt operated by handle inside, or by
key outside.� Deadbolt operated by thumbturn inside,
or by key outside.� Outside handle always inactive.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9336 – Inmate keyed lock� LCK cylinder outside.� LCK operates latchbolt only.� Master key operates latch and deadbolt from
outside.� Outside handle always inactive.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9316 (F16) – Deadlock� Deadbolt is operated by key either side.
D9317 (F17) – Deadlock� Deadbolt is operated by key outside,
thumbturn inside.
D9318 (F18) – Deadlock� Deadbolt is operated by key from outside only.
OUTSIDE INSIDE OUTSIDE INSIDE
C32 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM MECHANICAL LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Minimum/MediumD9300 MAXI-MORTISE™
D9300 Series Lock Functions
D9319 (F19) – Privacy, bedroom or bath lock� Latchbolt operated by handle either side.� Deadbolt operated by thumbturn inside,
emergency release outside.� Inside handle retracts both bolts.
D9320 (F20) – Apartment corridor door lock� Latchbolt operated by lever either side,
except when deadbolt is projected.� Deadbolt operated by key outside or
thumbturn inside.� Key operates both bolts.� Lever inside retracts both bolts.� Latchbolt is deadlocked when deadbolt is
projected.� When deadbolt is retracted, lever is unlocked.
D9321 (F21) – Entrance or storeroom door lock� Latchbolt is operated by handle either side.� Deadbolt operated by key outside, thumbturn
inside.
DLT-2OFFDummy trim for single or pairs of doors� Push or pull only.� Handles rigid at all times, trim not operational.� Full dummy trim, through-bolted.SHADED HANDLE DENOTES RIGID.
D9371 – Deadlatch� Deadlatch operated by key outside.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9372 – Deadlatch� Deadlatch operated by key both sides.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9373 – Deadlatch� Deadlatch operated by key outside,
handle inside.� Auxiliary deadlatch.
D9374 – Deadlatch� Deadlatch operated by handle or knob inside.
Outside handle rigid.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9375 – Deadlatch� Deadlatch operated by key outside.� Key locks inside handle. Outside handle rigid.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9376 – Deadlatch� Deadlatch operated by key both sides.� Key locks inside handle. Outside handle rigid.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
D9377 – Deadlatch� Deadlatch operated by key outside.� Key locks both handles.� Auxiliary deadlatch.
OUTSIDE INSIDE OUTSIDE INSIDE
FA Rev. 02-10 C33
For more information, please call 210.533.1231.
FOLGER ADAM MECHANICAL LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Minimum/Medium D9300 MAXI-MORTISE™
D9300 Series Lock Functions
D9378 – Deadlatch� Deadlatch operated by key both sides.� Key locks both handles.� Auxiliary deadlatch.
D9379 – Deadlatch� Deadlatch operated by key outside.� Key locks inside handle.� No outside handle.� Auxiliary deadlatch.
D9380 – Deadlatch� Deadlatch operated by key both sides.� Key locks inside handle.� No outside handle.� Auxiliary deadlatch.
D9361 – Latch and Deadbolt� Deadbolt operated by key outside.� Latch operated by both handles.
D9362 – Latch and Deadbolt� Deadbolt operated by key outside.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
D9363 – Latch and Deadbolt� Deadbolt operated by key both sides.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
D9364 – Latch and Deadbolt� Deadbolt operated by key outside.� Deadbolt operated by thumbturn inside.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
D9365 – Latch and Deadbolt� Deadbolt operated by key and LCK* cylinder
outside.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
D9366 – Latch and Deadbolt� Deadbolt and latch operated by key and LCK*
cylinder both sides.SHADED HANDLE DENOTES RIGID.
D9367 – Latch and Deadbolt� Deadbolt and latch operated by key and LCK*
cylinder outside.� Deadbolt and latch operated by thumbturn
inside.SHADED HANDLE DENOTES RIGID.
OUTSIDE INSIDE OUTSIDE INSIDE
*LCK - Limited Control Key used by inmate. See next page for more information.
C34 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Cylinder Data____________� Maxi-Mogul® key cylinders – D9300
Series Mortise Locks are providedwith Maxi-Mogul® key Cylinders, sixpin tumbler. Keys are sold separatelyand registered at the factory.
� Cylinder collar – An adjustablecylinder collar will be provided to suitthe cylinder length and doorthickness when both locks andcylinders are ordered. If not specified,rings will be for 1-3/4" thick doors.
� Trim / cylinder accessories – Thefollowing trim items will be providedper the lock function specified.
� LCK (limited control key) –Modification for Models D9336,D9365, D9366, D9367. Factoryprovided cylinder is modified to allowchange key a limited rotation toretract the latchbolt. Master key isunlimited and will operate both latchand deadbolt.
� Thumbturn and escutcheon –Furnished with Models D9304, D9313,D9317, D9320, D9321, D9335, D9364and D9367.
Removable thumbturn furnished withModel D9319.
Supplied with tamper-resistant No. 6 x 3/8" screws.
FOLGER ADAM MECHANICAL LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Minimum/MediumD9300 MAXI-MORTISE™
Maxi-Mogul® Key Cylinder
Maxi-Mogul® Key
Thumbturn with Escutcheon
FA Rev. 02-10 C35
For more information, please call 210.533.1231.
Strikes__________________D9300 Series Locks are supplied with acurved lip strike having a 1-1/4" liplength for use with doors 1-3/4" to 2"thick. Buffed stainless steel finish only.
� Strike with indication switch – Forelectric monitoring.
� Strike box – Wrought steel, zincplated, reversible for installation withflat or curved-lip strike.
� Special lip lengths – Strikes areinstalled 3/8" above the verticalcenterline of the lock. 1-1/4" liplength is standard. 1-1/2" lip length isoptional for doors from 2-1/8" to 2-1/4" thick.
Handing_________________Handing of locks should be indicatedwhen ordering. Guidelines shown onpage C46 will assist in determining thehand. Door must be addressed fromthe key side, the cylinder side or thesecured side.
How to Order____________Specify:
1) Trim
a. KR, Knob and rose set. (Safetyknob available “SK”, specify side).
b. LT, LeverTrak® Guide with handleand rose.
c. LTE, LeverTrak® Guide with handle,rose and escutcheon.
2) Lock Model D93__.
3) Function (see function descriptions)D9309.
4) Handing (RH, LH, RHR, LHR)
5) Cylinder
a. With cylinder(s)
b. Less cylinders(s)
6) Door material/thickness
7) Strike lip length
918 – 1-1/4" lip(s)914 – 1-1/2" lip(s)
8) Strike switch(es), if required
EXAMPLE:LT-D9309 LH Less cyl. 2"HM x 918-LS
The above is a public entrance lock withLeverTrak® Handle Guide, left hand, foruse with customer-supplied cylinder, ona 2" hollow metal door, equipped withstrike-mounted switch.
FOLGER ADAM MECHANICAL LOCKSKey: Mogul
Door: Swinging
SecurityLevel: Minimum/Medium D9300 MAXI-MORTISE™
918-D-SStrike switch
918-D ANSIDeadbolt strikeRH/LHR shown
918-DNLDeadbolt strike
without lip
900-BOXDust box
918-L ANSILatchbolt-only
strikeRH/LHR shown
918-LD ANSILatchbolt/deadbolt
strikeRH/LHR shown
C36 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: Mogul
Door: Swinging
SecurityLevel: Minimum/MediumD9300 MAXI-MORTISE™
FA Rev. 02-10 C37
For more information, please call 210.533.1231.
Description______________Series A9300 locks are pin tumblermortise locks for swinging doors.
Applications_____________An extra heavy-duty mortise lock for useon swinging doors in minimum securitycell or public areas of detentionfacilities. Available in a variety oflatchbolt, deadbolt and deadlockinglatchbolt styles.
Standards Compliance___UL10B listed as Fire Door Accessory, 4 hour rating.
ANSI/BHMA 156.13 Grade 1
ASTM F-1577 Grade 1 – Impact
Standard Features_______� Fits ANSI door preparation –
Standardized installation in hollowmetal doors modified toaccommodate lock body thickness of 1-1/8".
� Door thickness – Doors must be 1-3/4" to 2-1/2" thick.
� Armored front – 8" x 1-1/4" steel, 10 gauge.
� High strength case and cover –12 gauge.
� Corrosion-resistant working parts –Internal working parts are stainlesssteel or zinc chromated steel.
� Durable hubs – Solid stainless steelconstruction, on the square.
� Spindle – 11/32" cold drawn steel.
� Latchbolt – One-piece investmentcast 17-4 stainless steel, hardened,3/4" throw.
� Deadbolt – One-piece investmentcast 17-4 stainless steel, hardened, 1" throw.
� Latchbolt size – 11/16" x 1-1/4".
� Deadbolt size – 11/16" x 1-1/2".
� Reversible – Locks are fieldreversible. Handing should bespecified upon ordering.
� Key cylinder – Furnished withBuilders Hardware 6-pin tumbler keyhigh security cylinders.
� Screws – Tamper-resistant mountingscrews.
� Tamper-resistant – All bolts,including the auxiliary latchbolt, arefully tunneled to help preventjamming of the mechanism withforeign material.
� Strike – Supplied with curved-lipstrike having 1-1/4" lip length anddust box. Buffed stainless steelfinish only.
� Trim finish – US32D.
Optional Features________� Strike switch – Strike-mounted
indication switch for electricallymonitored systems.
FOLGER ADAM MECHANICAL LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum A9300 MAXI-MORTISE™
Shown without LeverTrak®
C38 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Trim Design______________� Knobs – standard trim US26D.
Specify KR for knob and rose trimwith lock.
Dimensions: 2-1/4" diameter.
Safety knob: Specify “SK” knob andside installed on.
� Lever handles – all lever handlesmust be installed with track.
Material: Stainless steel.
Dimensions: 3/4" diameter x 4-11/16"long.
� LeverTrak® Handle Guide Sets –
LT and LTE Handle Guide Sets mustbe specified. The track preventsdamage to mortise locks from over-travel of the handle.
Material: Stainless steel.
� Roses
Material: Stainless steel.
Dimensions: 2-11/16" diameter,concealed trim design.
� Secure escutcheon – SV 1/4" solidstainless steel trim plates throughboltthe door. Offered only with BuildersHardware cylinder and A9300 SeriesLock.
EXAMPLE: SV-A9361 x SK inside
IMPORTANT NOTE: The secureescutcheon trim package shown hereis available only with a BuildersHardware cylinder (A9300 SeriesLock). This trim package is notavailable with a Maxi-Mogul® Cylinder.
FOLGER ADAM MECHANICAL LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: MinimumA9300 MAXI-MORTISE™
LT – Lever handles and track setThe “Lemont”
LTE – Lever handles, track set and escutcheon
The “Limited”
KR – Knob and rose set
SV – Secure escutcheonThe “Stateville”
with KR – knob handle and rose
SV – Secure escutcheon(inside) with SK – safety knob
and rose
FA Rev. 02-10 C39
For more information, please call 210.533.1231.
FOLGER ADAM MECHANICAL LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum A9300 MAXI-MORTISE™
A9300 Series Lock Functions
A9301 (F01) – Passage or closed latch� Either handle operates the latchbolt at all
times.
A9304 (F04) – Entry lock� Latchbolt operated by handle either side
except when outside handle is madeinoperative by inside thumbturn.
� When outside handle is locked, latchboltoperated by key outside, handle inside.
� Auxiliary deadlatch.
A9305 (F05) – Classroom lock� Latchbolt operated by handle either side,
except when outside handle is locked by keyoutside.
� Inside handle is always operative.� Auxiliary deadlatch.
A9307 (F07) – Storeroom or closet lock� Latchbolt operated by key outside, handle
inside.� Outside handle inoperative at all times.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9309 (F09) – Apartment, exit or toilet lock� Latchbolt operated by handle either side
except when outside handle is locked by keyfrom inside.
� When outside handle is locked, latchbolt isoperated by key outside, handle inside.
� Auxiliary deadlatch.
A9313 (F13) – Dormitory or exit lock� Latchbolt operated by handle from either side.� Deadbolt projected by key outside, and
thumbturn inside.� Both bolts retracted by inside handle.
A9314 (F14) – Store door lock� Latchbolt operated by handles either side.� Deadbolt operated by key both sides.
A9335 (F15 Mod.) – Modified hotel guest lock� Latchbolt operated by handle inside, or by
key outside.� Deadbolt operated by thumbturn inside,
or by key outside.� Outside handle always inactive.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9336 – Inmate keyed lock� LCK cylinder outside.� LCK operates latchbolt only.� Master key operates latch and deadbolt from
outside.� Outside handle always inactive.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9316 (F16) – Deadlock� Deadbolt is operated by key either side.
A9317 (F17) – Deadlock� Deadbolt is operated by key outside,
thumbturn inside.
A9318 (F18) – Deadlock� Deadbolt is operated by key from outside only.
OUTSIDE INSIDE OUTSIDE INSIDE
C40 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM MECHANICAL LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: MinimumA9300 MAXI-MORTISE™
A9300 Series Lock Functions
A9319 (F19) – Privacy, bedroom or bath lock� Latchbolt operated by handle either side.� Deadbolt operated by thumbturn inside,
emergency release outside.� Inside handle retracts both bolts.
A9320 (F20) – Apartment corridor door lock� Latchbolt operated by lever either side,
except when deadbolt is projected.� Deadbolt operated by key outside or
thumbturn inside.� Key operates both bolts.� Lever inside retracts both bolts.� Latchbolt is deadlocked when deadbolt is
projected.� When deadbolt is retracted, lever is unlocked.
A9321 (F21) – Entrance or storeroom door lock� Latchbolt is operated by handle either side.� Deadbolt operated by key outside, thumbturn
inside.
DLT-2OFFDummy trim for single or pairs of doors� Push or pull only.� Handles rigid at all times, trim not operational.� Full dummy trim, through-bolted.SHADED HANDLE DENOTES RIGID.
A9371 – Deadlatch� Deadlatch operated by key outside.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9372 – Deadlatch� Deadlatch operated by key both sides.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9373 – Deadlatch� Deadlatch operated by key outside,
handle inside.� Auxiliary deadlatch.
A9374 – Deadlatch� Deadlatch operated by handle or knob inside.
Outside handle rigid.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9375 – Deadlatch� Deadlatch operated by key outside.� Key locks inside handle. Outside handle rigid.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9376 – Deadlatch� Deadlatch operated by key both sides.� Key locks inside handle. Outside handle rigid.� Auxiliary deadlatch.SHADED HANDLE DENOTES RIGID.
A9377 – Deadlatch� Deadlatch operated by key outside.� Key locks both handles.� Auxiliary deadlatch.
OUTSIDE INSIDE OUTSIDE INSIDE
FA Rev. 02-10 C41
For more information, please call 210.533.1231.
FOLGER ADAM MECHANICAL LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum A9300 MAXI-MORTISE™
A9300 Series Lock Functions
A9378 – Deadlatch� Deadlatch operated by key both sides.� Key locks both handles.� Auxiliary deadlatch.
A9379 – Deadlatch� Deadlatch operated by key outside.� Key locks inside handle.� No outside handle.� Auxiliary deadlatch.
A9380 – Deadlatch� Deadlatch operated by key both sides.� Key locks inside handle.� No outside handle.� Auxiliary deadlatch.
A9361 – Latch and Deadbolt� Deadbolt operated by key outside.� Latch operated by both handles.
A9362 – Latch and Deadbolt� Deadbolt operated by key outside.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
A9363 – Latch and Deadbolt� Deadbolt operated by key both sides.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
A9364 – Latch and Deadbolt� Deadbolt operated by key outside.� Deadbolt operated by thumbturn inside.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
A9365 – Latch and Deadbolt� Deadbolt operated by key and LCK* cylinder
outside.� Latch operated by inside handle.SHADED HANDLE DENOTES RIGID.
A9366 – Latch and Deadbolt� Deadbolt and latch operated by key and LCK*
cylinder both sides.SHADED HANDLE DENOTES RIGID.
A9367 – Latch and Deadbolt� Deadbolt and latch operated by key and LCK*
cylinder outside.� Deadbolt and latch operated by thumbturn
inside.SHADED HANDLE DENOTES RIGID.
OUTSIDE INSIDE OUTSIDE INSIDE
*LCK - Limited Control Key used by inmate. See next page for more information.
C42 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Cylinder Data____________� Standard cylinders – A9300 Series
Mortise Locks are provided with highsecurity six-pin tumbler mortisecylinders 1-1/8" long. Provided withtwo keys.
� Customer-supplied cylinders andcompression ring – Customer-provided cylinders must be equippedwith a Schlage “L” type (clover-leaf)Cam and must be 1-1/8" long.
� Cylinder and blocking rings – Will beprovided to suit the cylinder lengthand door thickness when both locksand cylinders are ordered. If notspecified, rings will be for 1-3/4" doorthickness.
� LCK (limited control key) –Modification for Models A9336,A9365, A9366, A9367. Factoryprovided cylinder is modified to allowchange key a limited rotation toretract the latchbolt. Master key isunlimited and will operate both latchand deadbolt. NOTE: LCK notavailable with removable corecylinders.
� Optional feature – Removable corecylinders available on request.
� Trim accessories – The following trimitems will be provided:
� Thumbturn and escutcheon –Furnished with Models A9304, A9313,A9317, A9320, A9321, A9335, A9364and A9367.
Removable thumbturn furnished withModel A9319.
Supplied with tamper-resistant No. 6 x 3/8" screws. Wood screwsalso available on request.
FOLGER ADAM MECHANICAL LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: MinimumA9300 MAXI-MORTISE™
Thumbturn with escutcheonMortise key cylinder
FA Rev. 02-10 C43
For more information, please call 210.533.1231.
Strikes__________________A9300 Series Locks are supplied withANSI curved lip strikes having a 1-1/4"lip length, for use with doors 1-3/4" to2" thick. Buffed stainless steel finishonly. Strike is handed to match lock anddoor. When ordering strikes separately,specify handing of lock.
� Strike with indication switch –For electrical monitoring.
� Strike box – Wrought steel, zincplated, reversible for installation withflat or curved-lip strike.
� Special lip lengths – Strikes areinstalled 3/8" above the verticalcenterline of the lock. 1-1/4" liplength is standard. 1-1/2" lip length isoptional for doors from 2-1/8" to 2-1/4" thick.
Handing_________________Handing of locks should be indicatedwhen ordering. Guidelines shown onpage C46 will assist in determining thehand. Door must be addressed fromthe key side, the cylinder side or thesecured side.
How To Order____________Specify:
1) Trim
a. KR, Knob and rose set. (Safetyknob available “SK”, specify side).
b. LT, LeverTrak® Guide with handleand rose.
c. LTE, LeverTrak® Guide with handle,rose and escutcheon.
d. SV – “Stateville” escutcheon plateswith knob and rose sets.
2) Function (see function descriptions)A9309.
3) Handing (RH, LH, RHR, LHR).
4) Cylinder
a. With cylinder(s) – include keyinginformation.
b. Less cylinders(s) – must usea Schlage “L” type cam (seeprevious page).
5) Door material/thickness
6) Strike lip length918 - 1-1/4" lip (s)914 - 1-1/2" lip (s)
7) Strike Switch(es)
EXAMPLE:LT-A9309 LH Less cyls. 2"HM x 918-LS
The above is a public entrance lock withLeverTrak® Handle Guide, left hand, foruse with customer-supplied cylinders,on a 2" hollow metal door, equippedwith strike-mounted switch.
FOLGER ADAM MECHANICAL LOCKSKey: Builders Hardware
Door: Swinging
SecurityLevel: Minimum A9300 MAXI-MORTISE™
918-D-SStrike switch
918-D ANSIDeadbolt strikeRH/LHR shown
918-DNLDeadbolt strike
without lip
900-BOXDust box
918-L ANSILatchbolt-only
strikeRH/LHR shown
918-LD ANSILatchbolt/
deadbolt strikeRH/LHR shown
C44 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Dimensional Data________Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
FOLGER ADAM MECHANICAL LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: MinimumA9300 MAXI-MORTISE™
FA Rev. 02-10 C45
For more information, please call 210.533.1231.
FOLGER ADAM MECHANICAL LOCKS
9300 LOCKCONVERSION CHART
FANSINUMBER
FANSINAME
LATCH-BOLT
DEAD-BOLT
DEAD-LATCH
HANDLEOUTSIDE KEY
CYLINDERHANDLE INSIDE KEY CYLINDER THUMBTURN
GROUP 3 – LATCH AND DEADBOLT
9361 (112K Lock) X X ActiveOperates Deadbolt
Active
9362 (102-10 Lock) X X InactiveOperates latch
& deadboltActive
9363 (112-10 Lock) X X InactiveOperates latch
& deadboltActive
Operates latch & deadbolt
9364 (112-11 Lock) X X InactiveOperates latch
& deadboltActive
Operates latch & deadbolt
9365* (112-12 Lock) X X InactiveMK operates
latch & deadboltActive
9366* (112-13 Lock) X X InactiveMK operates
latch & deadboltInactive
MK operates latch & deadbolt
9367* (112-14 Lock) X X InactiveMK operates
latch & deadboltInactive
Operates latch & deadbolt
GROUP 4 – DEADLOCKING LATCH
9371 (125-1-07 Lock) X X Inactive Operates latch Inactive
9372 (125-1-08 Lock) X X Inactive Operates latch Inactive Operates latch
9373 (125-1-09 Lock) X X No outside trim Operates latch Active
9374 (125-1-11 Lock) X X Inactive No cylinder Active No cylinder
9375 (125-4-01 Lock) X X InactiveOperates latch
& locks out knobActive – Unlocked & locked by key
9376 (125-4-02 Lock) X X InactiveOperates latch
& locks out knobActive – Unlocked & locked by key
Operates latch & locks out knob
9377 (125-4-03 Lock) X XActive – Unlocked & locked by key
Operates latch & locks out knob
Active – Unlocked & locked by key
9378 (125-4-04 Lock) X XActive – Unlocked & locked by key
Operates latch & locks out knob
Active – Unlocked & locked by key
Operates latch & locks out knob
9379 (125-4-09 Lock) X X No outside trimOperates latch
& locks out knobActive – Unlocked & locked by key
9380 (125-4-10 Lock) X X No outside trimOperates latch
& locks out knobActive – Unlocked & locked by key
Operates latch & locks out knob
*LCK - Change key operates latchbolt only. Master key operates latchbolt and deadbolt.
C46 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM MECHANICAL LOCKS Key: Builders Hardware
Door: Swinging
SecurityLevel: MinimumD9300/A9300
MAXI-MORTISE™
Specify circled swing number when ordering.
KEYED BOTH SIDESLeft Hand Door
Swing InRight Hand Door
Swing In
Left Hand Lock Right Hand Lock
1 2
INSIDE
OUTSIDE
KEYED STOP SIDELeft Hand Door
Swing InRight Hand Door
Swing In
Left Hand Lock Right Hand Lock
5 6
INSIDE
OUTSIDE
KEYED HINGE SIDELeft Hand Door
Swing InRight Hand Door
Swing In
Right Hand ReverseBevel Lock
Left Hand ReverseBevel Lock
3 4
INSIDE
OUTSIDE
KEYED BOTH SIDESLeft Hand Reverse Bevel
Swing OutRight Hand Reverse Bevel
Swing Out
Left HandReverse Bevel Lock
Right HandReverse Bevel Lock
7 8
INSIDE
OUTSIDE
KEYED STOP SIDELeft Hand Reverse Bevel
Swing OutRight Hand Reverse Bevel
Swing Out
Right Hand Lock Left Hand Lock
11 12
INSIDE
OUTSIDE
KEYED HINGE SIDELeft Hand Reverse Bevel
Swing OutRight Hand Reverse Bevel
Swing Out
Left HandReverse Bevel Lock
Right Hand ReverseBevel Lock
9 10
INSIDE
OUTSIDE
= Indicates keyed side (or sides)
= Hollow metal jamb
= Symbolizes latch bolt
FA Rev. 02-10 D1
For more information, please call 210.533.1231.
Definition_______________Locking Devices are mechanisms to controlsliding doors on cell or corridor applications.
Drive Systems___________Folger Adam locking devices aremanufactured with a variety of dependabledrive systems suitable for a range ofapplications and user preferences.
Application Benefits_____Securing inmate cell or room doors withremotely operated locking devices offers avariety of benefits over key-operated locks.The following also apply to corridoroperators:
� Safety – Doors are operated from asecure location, minimizing staff andinmate contact.
� Security – Locking components andmechanisms are inaccessible to inmates.
� Efficiency – Fewer staff members areneeded for maintaining security andinmate movement.
� Space-saving – Sliding doors do not takeup valuable corridor space and improvetraffic flow.
� Flexibility – Combined with optionalelectric controls, these devices allowselective operation of single doors,groups of doors or all doors.
� Life Safety – Devices are normallyequipped with emergency manualoperation to provide egress in event ofpower failure or emergency.
Construction Notes______Although specific models are shown, lockingdevices are fabricated to specificrequirements, using standard componentsfor ease of maintenance. Floor plans shouldbe reviewed, the security system analyzed,and the mechanism or series ofmechanisms constructed to the building’sneeds. Advance coordination can helpassure your satisfaction with devices andoperators. Consult with us regarding thenumber of doors to be controlled, and otherpertinent data so that we may make specificrecommendations. Locking devices areshipped as a set of components andassemblies, ready to be installed. Prior toshipment, all units are tested. Motors anddrive assemblies are operated, switches areelectrically tested and pre-set (they mayrequire adjustment on site), and surfacesare primed with rust inhibitors.
Qualification ofSecurity Levels__________The security level of a locking device orcorridor operator is determined by its abilityto endure in the specific environment inwhich it is used, the level of supervisionwithin the area where it is installed, and avariety of other factors. These devices carrylevel-of-security designations. Thesedesignations are Southern Folger’sevaluation of the ability of the product towithstand the rigors probable in thatparticular security level. The terms,minimum, medium and maximum, are usedto describe the relative relationship ofproducts to one another. Because of thenumber of variables affecting security level,the designations in this catalog should beconsidered as guidelines only.
Keys/Keying Security____Selected models of locking devices may beequipped with a front column containingoptional operational features for localelectric or mechanical control. All keys forthese locks are registered prior to shipmentto permit prompt, accurate response torequests for additional or replacement keys.Requests for keys may require authorizationby the using facility. Keys are always soldseparately and not included in the price ofthe lock, column, or device.
� Keys should be handled only by staffpersonnel.
� Keys should be stored in a locked cabinet,in the charge of an executive officer.
� Staff personnel should conceal the bittedend from the view of inmates. Key shieldsavailable.
� Keys should never be left in a lockcylinder or out of the reach of the officer.
� Doors should be closed and locked afteruse, and locks checked frequently fortampering and vandalism. Doors leftopen for extended periods should besubject to lock and bolt keeperinspection. This precludes obstructionswhich may interfere with proper operation.
Electrical Indication______Electrical indication, or monitoring of doorstatus, is an important aspect of security. AllFolger Adam locking devices incorporate themonitoring switches necessary to providevisual or other indication of door status at aremote cabinet or control panel. In a typicalelectrical control panel, operation switchesare accompanied by indication lampsdesigned to clearly show door status. Whenordered separately, mechanical, electrical, ora combination of both control methods maybe supplied.
FOLGER ADAM LOCKING DEVICES
INTRODUCTION
D2 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Indoor cell Manual Mechanical Maximum 102 D7-D8or corridor
Indoor/cell Roller Chain Remote electric Maximum 2B.3 (2) (4) D9-D11sliding and mechanical
Indoor/cell Rack & Pinion Individual or gang Maximum 3B.2 (2) (4) D13-D15sliding
Indoor/cell Manual Individual or gang Medium KR.3 (1) (2) (4) D17-D19sliding
Mechanical D21-D22Control Cabinets
Indoor/corridor Roller Chain Remote electric Maximum D (2) (3) D23-D24exterior gate local mechanicalsliding
Indoor/corridor Roller Chain Remote electric Maximum D2B.3 (1) (2) D25-D26sliding local mechanical
Indoor/corridor Rack & Pinion Remote electric Maximum D3B.2 (1) (2) D27-D28sliding local mechanical
Indoor/corridor Roller Chain Remote electric Maximum D5B (2) (3) D29-D30sliding local electric and
local mechanical
Indoor/corridor Manual Remote electric Medium/ DKR.3 (2) (3) D31-D32sliding local mechanical Maximum
Exterior/entry Roller Chain Remote electric Maximum G Bi-parting D33-D34door/gate local mechanical Maximum G (3)sliding
Exterior/vehicle Roller Chain Remote electric Medium J (3) D35-D36sliding local mechanical
FOLGER ADAM LOCKING DEVICES
LOCKING DEVICE SELECTIONGUIDE AND SECTION INDEX
DOORTYPE
DRIVETYPE
RELEASETYPE
SECURITYLEVEL
MODEL/FEATURE PAGE
Feature (1) Optional Front Column. (2) Deadlocks at two concealed points at the rear edge of the door. Locking components are not exposedat the front edge of the door and, therefore, not subject to tampering. (3) Standard Front Column provided. (4) Normally used in conjunctionwith a mechanical control cabinet.
The above is a general guideline. To determine specific models required for your application, refer to product pages fordetailed descriptions.
FA Rev. 02-10 D3
For more information, please call 210.533.1231.
FOLGER ADAM LOCKING DEVICES
LOCKING DEVICE/DOOR OPERATORAPPLICATION GUIDELINES
IMPORTANT NOTE: The above are guidelines and not specific recommendations. The security of a particular door or group ofdoors depends upon not only hardware employed, but also supervision both direct and indirect. For questions on application of aparticular lock, contact the Southern Folger Marketing Department or your Regional Manager.
D4 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM LOCKING DEVICES
Installation Overview____The purpose of this section is to providean outline of the considerationsinvolved in specifying a locking device.Complete installation information isissued on a per-job basis, so that theinstaller is able to perform efficiently.The data presented here is intended toassist the specifier in defining productfunctions for preparing specifications forlocking device systems.
Electrical Wiring
Provision should be made for conduitconnections to locking devices andoperators, whether for interior orexterior application. All devices areshipped with motors and switchesfactory wired to a terminal strip.Additional field wiring may be required.The custom nature of locking devicesystems – number of doors, length ofrun, number of units, etc. – precludestotal pre-wiring at the factory. Optionalcell line cable is available, whichprovides simplified connection of the
device drive system to the emergencyrelease cabinet or as specified.
Devices recommended for indoor cellsare provided with an internal wiring tray.This tray provides a routing path forwire and helps to keep wires away fromthe drive system of the device.
Physical Installation
A locking device is shipped from thefactory in component assemblies forerection within the facility. A typicallocking device consists of a mechanismhousing, vertical lock column, doorreceiver, door hanger, door guide andguide angle, and control cabinet. Thelist of components may vary dependingupon the specific device ordered.
Hardware Interface
Other hardware will be needed to installthe devices, which is not provided bySouthern Folger. Doors, frames andembedded items, such as mountingangles, anchors and bolts (in the case ofmasonry walls) must be ordered to
allow attachment of the locking deviceor operator to the wall in accordancewith our installation instructions.Coordination between the specifier of alocking device system and the factory isessential to ensure trouble-freeinstallation. Consult with us early in theplanning stages for assistance.
Southern Folger offers technical anddesign services to the specifier whichare backed by over a century ofexperience in the detention equipmentindustry. For any question of applicationor operation of a specific device oroperator, contact the factory for furtherinformation.
LOCKING DEVICEAPPLICATION GUIDELINES
FA Rev. 02-10 D5
For more information, please call 210.533.1231.
Considerations__________1. Application
a. Multiple cell doorsb. Individual corridor door
2. Location of door(s)a. Interiorb. Exterior
3. Overall number of doors to be controlled
4. Door model/size/weight5. Wall type
a. Masonryb. Concretec. Plate
6. Drive typea. Chainb. Rack and Pinionc. Manual
7. Control requireda. Mechanical
1. Mechanical at the door2. Mechanical remote
gang unlockingb. Electrical
1. Electrical at the door2. Electrical remote3. Electrical inmate
c. Customized systemd. Control location
1. Adjacent to door2. End of cell run3. Remote control room
8. Optional features requireda. Front release columnb. Key switch operationc. Mechanical release systemd. Wire harness
(2B, 3B, KR)e. Deadlock-open feature
(2B, KR, DKR)f. Three light indication
(2B, KR)
FOLGER ADAM LOCKING DEVICES
GUIDE TO SPECIFICATIONPREPARATION
BLANK PAGE
FA Rev. 02-10 D7
For more information, please call 210.533.1231.
Description______________Track and hanger sets are overheadsupporting devices for manually-operated sliding doors ranging in widthfrom 2'0" to 3'6" up to a maximumweight of 350 pounds.
Applications_____________Track and hanger sets may be used forcell or corridor doors on grille, masonryor plate wall construction. Threestandard housing sizes suit most doorsizes and applications. Specify type ofwall for guide mounting.
Standard Features_______� Self-contained – Each set consists of
a track box and cover, door hangerwith adjustable rollers for leveling,door guide and door guide angle.
� Heavy housing construction –10-gauge steel with cold-finished steeltrack.
� Sloped-top housing – 10-gauge steel,sloped to prevent hiding ofcontraband.
� Corrosion-resistance – Working partsresist rust and corrosion.
� Tamper-resistance – Cover providedwith tamper-resistant screws.
� Adjustable door rollers – Eccentricbushings permit adjustment to levelthe door.
� Smooth operation – Door rollers 3-3/4" x 1" thick, zinc plated steelwith sealed, anti-friction bearings.
� Adjustable door stop – Steel blockattached to track with setscrews.
� Non-handed – Reversible for doorssliding to right or left.
� Finish – USP Primed for painting.� Rubber bumper – Attached to
doorstop, cushions door in the openposition to reduce noise.
Optional Features________� Indication switch – An internal switch
monitors position of the doorindicating either open or closedstatus. Add suffix “L” when ordering.
� Door starter – A spring-loadedplunger to push a door slightly openafter unlocking. Used with remotecontrolled electric locks or mechanicallocks to move door open onceunlocked. Add suffix “S” whenordering.
� Custom sizes – Sets may beconstructed for wider and heavierdoors. Consult the factory with yourspecific application.
� Continuous housing – Sets may bebuilt to suit the width of a group ofcells and may contain a wire tray forcell line cable connecting locks to acommon point at the end of a cellrun.
FOLGER ADAM LOCKING DEVICESDrive: ManualRelease: IndividualSecurityLevel: Maximum 102 TRACK AND
HANGER SETS
D8 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Door receivers or electric lockcolumns – Receivers may be suppliedto capture the front edge of the door.Lock columns provide a method ofmounting a lock, protecting the wiringand installing the door receiver.
Electrical Characteristics__(Indication switch)
Single-pole, double-throw (SPDT), 15 amps @ 125 or 250 VDC.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only and shouldnot be used as templates.
Models Available________
FOLGER ADAM LOCKING DEVICES Drive: ManualRelease: IndividualSecurityLevel: Maximum102 TRACK AND
HANGER SETS
NOTE: When a door width falls between two track set sizes, specify the smaller size.
Model Description Door Width Cell Structure Weight (lbs.)
102-1G Track/hanger set 2'-0" – 2'-6" Grille 95
102-1M Track/hanger set 2'-0" – 2'-6" Masonry 95
102-2G Track/hanger set 2'-6" – 3'-0" Grille 110
102-2M Track/hanger set 2'-6" – 3'-0" Masonry 110
102-3G Track/hanger set 3'-0" – 3'-6" Grille 125
102-3M Track/hanger set 3'-0" – 3'-6" Masonry 125
FA Rev. 02-10 D9
For more information, please call 210.533.1231.
Description______________Type 2B.3 locking devices are highsecurity, motorized sliding cell dooroperating and locking systems for usewith any doors not exceeding 300pounds.
Applications_____________2B.3 devices are applicable to anymultiple cell or inmate room doorsituation. Optional controls provideselective operation of single or groupsof doors simultaneously.
Functions________________Unit unlocks, opens and deadlocksopen, or closes and deadlocks closed,pre-selected individual doors or doorgroups, via optional electric controls.Gang release is by mechanical releasecabinet.
Door movement may be stopped inmid-travel. The door is not free-wheeling in the electrical mode.Pressure exerted by a door in travel isfactory set at approximately 40 pounds.Force is adjustable between 20 and 50pounds.
Direction of travel of any individual orselected group of doors may bereversed without interrupting theoperation of other doors.
When a single door is blocked, there isno interruption in the operation of anyother door in the group. On removal ofthe blockage, the door will automaticallycontinue movement to the open orclosed position.
In event of emergency or power failure,any door may be unlocked manually at
the door, and moved by hand withoutchanging the locked status of any otherdoors.
In event of power failure, doors may bemanually opened or closed by slidingthe door.
Locking System__________Upon closure, each door automaticallydeadlocks at two concealed points atthe rear edge of the door. Uponopening, each door automaticallydeadlocks open at the front edge of thedoor. Locking components are notexposed at the front edge of the doorand, therefore, not subject totampering. Components do not projectinto the door opening.
Testing__________________Type 2B Series has been in service since1962, and this system has been testedat 500,000 cycles.
Standard Features_______� Motor voltage – 120 VAC.� Plug-type connectors – Simplified
wire harness installation.� Rugged chain drive – Provides
consistent action of the door under avariety of conditions and installationvariables.
� Heavy duty construction – 2B.3devices are built for the rigors ofmaximum security applications.
FOLGER ADAM LOCKING DEVICESDrive: Roller ChainRelease: Remote Electrical &Mechanical, Local MechanicalSecurityLevel: Maximum 2B.3 SLIDING DOOR
LOCKING DEVICE
D10 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Tamper-resistance – Openings inhousings are baffled to resist inmatetampering.
� Selective operation – Single orgroups of doors may besimultaneously opened or closed anddeadlocked.
� Adjustable torque limiter – Simpleadjustment of force exerted by thedoor. May be set between 20 and 50pounds.
� Sloped-top housing – Resists hidingof contraband. Flat-top housingprovided where device must installclose to ceiling.
� Fixed hinge cover – Allowsmaintenance without the need to liftheavy covers off the device.
� Cover lock – Device mechanisms areconcealed by an outer cover andunlocked from the release cabinet.
� Automatic deadlocking – When fullyclosed or open, independent top andbottom locking points on the rear ofeach door automatically deadlock.
� Indication switch – Monitors thedeadlocked condition of both lockingpoints.
� Gang release – From mechanicalrelease cabinet.
� Self-contained – A continuous,surface-mounted housing contains thedrive and mechanical releasemechanisms and wiring.
� Removable end battens – Simplifyinstallation of wire harnesses.
� Full length wire tray – Simplifiesrouting of electrical wire/harnesses.Runs the full length of the housing.
Optional Features� Key switches – May be added in
columns or nearby for local electriccontrol.
� Two point locking mechanicalrelease cabinet – A three-positionlever handle or crank handle isprovided.Lever provides:
1. Electric operation – Door controlfrom a remote location.
2. Release ports open – Opening ofindividual release ports. Doors tobe individually released at thedoor with a removable handle.Covers are also individuallyreleased from the port.
3. Emergency unlock – Gang release of all doors in event ofemergency or power failure.
� Electrical/mechanical control cabinet – Electrical switches may beordered to provide control of eachdoor in addition to mechanicalfunction. These switches may be builtinto the same cabinet as themechanical levers, or located remotelyas required. The following switchfunctions are available:Three-position operating switches –(OPEN-GROUP-CLOSE).Group switch – Provides groupcontrol (OPEN-OFF-CLOSE).
Power cut-off switch – Cuts offelectrical current to controls.Indication lamps – Red and greenindicator lamps may be installed withswitches to show deadlocked, closed,or open status of each door.
� Special indication lamps – Anadditional (amber) lamp is available.When used, indication is as follows:Red - Locked open.Green - Deadlocked closed.Amber - Moving, or stopped in mid-travel.
� Custom graphic controls – In manycases, it may be desirable to separateelectric controls from the mechanicalrelease cabinet located near the cells.For larger installations, or those withparticular needs, custom-built controlconsoles may be easily provided withfloor plan graphics screened on thecontrol panel, and an array ofspecialized features.
� Wire harness – For applications usinga series of locking devices, a wireharness(es) may be specified tointerconnect terminal strips in themechanical control/release cabinet toa plug connector at the dooroperating unit. Simplifies routing ofwire, and saves installation cost andtime.
� G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICES Drive: Roller ChainRelease: Remote Electrical &Mechanical, Local MechanicalSecurityLevel: Maximum2B.3 SLIDING DOOR
LOCKING DEVICE
FA Rev. 02-10 D11
For more information, please call 210.533.1231.
FOLGER ADAM LOCKING DEVICESDrive: Roller ChainRelease: Remote Electrical &Mechanical, Local MechanicalSecurityLevel: Maximum 2B.3 SLIDING DOOR
LOCKING DEVICESpecifications_________� Drive system –
Rate of travel: Opens or closes a 30" door in approximately 6seconds.
Motor: 120 VAC, 60 HZ, 1/20 HP.
Roller chain: #41 size.
Hanger and guides: 1/4" thicksteel.
Rollers: Cold formed steel.Rollers are mounted on hardenedball bearings protected byinternal grease shields.
Finish: USP.
� Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel,hinged to housing.
Vertical lock column housing:1-1/2" x 2" x 11 gauge steeltubing on solid steel cast bottom.
Wire tray: 16-gauge steel tray.
Front receiver column (optional): 10-gauge steel.
Finish: USP primed.
Typical 2B.3 slope-top elevation.Left hand (LH) as shown.
Right hand (RH) opposite as shown.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
BLANK PAGE
FA Rev. 02-10 D13
For more information, please call 210.533.1231.
Description______________Type 3B.2 locking devices are highsecurity, motorized cell door operatingand locking systems for use with doorsnot exceeding 300 pounds.
Applications_____________3B.2 devices are applicable to multiplecell or inmate room situation. Optionalcontrols provide selective operationof single or groups of doorssimultaneously.
Functions________________Unit unlocks, opens or closes and locksclosed pre-selected individual doors ordoor groups, via optional electriccontrols. Gang release is via mechanicalrelease cabinet.
Door movement may be stopped inmid-travel, leaving the door in a fixed(non-movable) position. The door mustbe moved (restarted) electrically ormechanically to the open or closedposition to lock.
Direction of movement of anyindividual door may be reversedwithout interrupting the movement ofany other door in the group.
When a single door is blocked, there isno interruption in operation of anyother door in the group. On removal ofthe blockage, the door will automaticallycontinue to the open or closed position.
In event of emergency, all doors maybe unlocked from the mechanicalrelease cabinet. In mechanical mode,the motor is disengaged from the rack,and doors may be unlocked or relockedusing a special tool.
In event of power failure, all doorsremain in a fixed position, and must beoperated mechanically. Doors are free-wheeling when released.
Locking System__________Upon closure, each door automaticallylocks at two concealed points at the rearedge of the door. No lockingcomponents are exposed at the front
edge of the door where they might besubject to tampering. Components donot project into the door opening.
Testing__________________Type 3B Series have been in servicesince 1972 and has been tested to500,000 cycles.
FOLGER ADAM LOCKING DEVICESDrive: Rack and PinionRelease: Individual
and/or GangSecurityLevel: Maximum 3B.2 SLIDING DOOR
LOCKING DEVICE
D14 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Standard Features_______� Motor voltage – 120 VAC.� Rack and pinion gear drive.� Heavy duty construction – 3B.2
devices are built for the rigors ofmaximum security applications.
� Tamper-resistance – Openings inhousings are baffled to precludeinmate tampering.
� Selective operation – Single orgroups of doors may besimultaneously opened, or closed andlocked.
� Sloped-top housing – Resists hidingof contraband. Flat-top housing isprovided where the device mustinstall close to the ceiling.
� Automatic locking – When fullyclosed, top and bottom locking pointson the rear of each door are forceddown into the deadlocked position.
� Indication switch – Monitors thelocked condition of both lockingpoints.
� Gang release – From mechanicalrelease cabinet.
� Self-contained – A continuous,surface-mounted housing contains thedrive and mechanical releasemechanisms and wiring.
� Full length wire tray – Simplifiesrouting of electrical wire/harnesses.Runs the full length of the housing.
� Terminal strips – All internalcomponents are pre-wired to aterminal strip. The strip is also usedfor ease of field wiring.
Optional Features________� Mechanical release cabinet – See
page D21-22.� Key switches – May be added in
columns or nearby for local electriccontrol.
� Electrical/mechanical controls –Electrical switches may be specified toprovide control of each door inaddition to mechanical function.These switches may be built into thesame cabinet as the mechanicallevers, or located at a remote console,as needs dictate. The following switchfunctions are available:Three-position operating switches –(OPEN-GROUP-CLOSE).Group switch – Provides groupcontrol (OPEN-OFF-CLOSE).Power cut-off switch – Cuts offelectrical current to controls.Indication Lamps – Red and greenindicator lamps may be installed inconjunction with switches to showlocked, closed, or open status of eachdoor. When used, the indication is asfollows:Red – Unlocked, moving or stoppedin mid-travel.Green - Locked closed.
� Custom graphic consoles – In manycases, it may be desirable to separateelectric controls from the mechanicalrelease cabinet located near the cells.For larger installations, or those withparticular needs, custom-built controlconsoles may be easily provided withfloor plan graphics screened on thecontrol panel, and an array ofspecialized features.
� Cell line cable – For applicationsusing a series of locking devices, acell line cable may be specified tointerconnect to terminal strips in themechanical control/release cabinet.Simplifies routing of wire and savesinstallation cost and time.
� G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICES Drive: Rack and PinionRelease: Individual
and/or GangSecurityLevel: Maximum3B.2 SLIDING DOOR
LOCKING DEVICE
FA Rev. 02-10 D15
For more information, please call 210.533.1231.
Specifications_________� Drive system –
Type: Rack and Pinion.
Rate of travel: Opens or closes a2'4" door in 5 seconds.
Motor: 120 VAC, 60 HZ, 1/20 HP.
Hanger and guides: 1/4" thicksteel.
Rollers: Steel with ball bearings.
Finish: USP.
� Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel.
Vertical lock column housing:7-gauge steel.
Wire tray: 16-gauge steel tray.
Front receiver column(optional): 7-gauge steel.
Finish: USP.
FOLGER ADAM LOCKING DEVICESDrive: Rack and PinionRelease: Individual
and/or GangSecurityLevel: Maximum 3B.2 SLIDING DOOR
LOCKING DEVICE
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
Typical 3B.2 slope-top elevation.Left hand normal (LHN) as shown.
Right hand normal (RHN) opposite as shown.
BLANK PAGE
FA Rev. 02-10 D17
For more information, please call 210.533.1231.
Description______________Type KR.3 devices are medium security,sliding cell door locking devices for usewith doors not exceeding 300 pounds.
Applications_____________KR.3 devices are applicable to anymultiple cell or inmate room doorsituation requiring selective, remote,electrical unlocking and manualmovement of the door either open orclosed.
Functions________________Unit unlocks selected individual doorsfrom a remote push button. A doorstarter then opens the door(s) a fewinches.
Doors opened or closed manuallyautomatically snaplock and deadlock.
In event of emergency or power failure,gang unlocking is accomplished in aremote, mechanical release cabinet.Doors are then opened the remainderof the way by hand.
Locking System__________Upon closure, each door automaticallydeadlocks at two concealed points atthe top and bottom rear edge of thedoor. Upon opening, each doorautomatically deadlocks open at thefront edge of the door. Lockingcomponents are not exposed or subjectto tampering. Components do notproject into the door opening.
Testing__________________Type KR Series have been in servicesince 1962, and has been tested to500,000 cycles.
Standard Features_______� Motor voltage – 120 VAC.� Plug-type connectors – Simplified
wire harness installation.� Individual motor unlocking – Each
door is unlocked by its own motor.
FOLGER ADAM LOCKING DEVICESDrive: ManualRelease: Individual
and/or GangSecurityLevel: Medium KR.3 SLIDING DOOR
LOCKING DEVICE
D18 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Heavy duty construction – KR.3devices are ruggedly built for a rangeof detention environments.
� Tamper-resistance – All openings inhousings are baffled to resist inmatetampering.
� Selective unlocking – Each door maybe unlocked by an individual controlswitch, group-unlocked with an all-door switch, or individually releasedthrough a port.
� Sloped-top housing – Resists hidingof contraband.Flat-top housing is provided wherethe device must install close to theceiling.
� Fixed hinge cover – Allowsmaintenance without lifting heavycovers off the device.
� Automatic deadlocking – When fullyclosed or open, independent top andbottom locking points on the rear ofeach door automatically deadlock.
� Indication switch – Monitors thedeadlocked condition of both lockingpoints and mid-travel.
� Two point locking mechanicalrelease cabinet – A three-positionlever handle or crank handle isprovided.Lever provides:
1. Electric operation – Door controlfrom a remote location.
2. Release ports open – Opening ofindividual release ports. Doors tobe individually released at thedoor with a removable handle.Covers are also individuallyreleased from the port.
3. Emergency unlock – Gang release of all doors in event ofemergency or power failure.
� Full length wire tray – Simplifiesrouting of electrical wire/harnesses.Runs the full length of the housing.
� Removable end battens – Simplifyinstallation of wire harnesses.
� Locked open feature – Permits doorsto be held open and immovable.
Optional Features________� Motor voltage – 24 VDC.� Mechanical release column –
A release column containing a No. 82 Deadlock may be added toprovide local mechanical locking andunlocking by paracentric prison key.
� Two-position motor (MC) – Unlocksthe door by an electric switch. Onceunlocked, the mechanism remains inthe unlocked position until electricallyselected to relock. The door may thenbe deadlocked in either the open orclosed position.
� Key switch – An electric key switchmay be added to the above columnfor local electric control.
� Inmate control feature – Releasecolumns may be equipped with aninmate push button on the cell side,and a key cylinder on the outside.Inmates may exit by pressing thepush button, and reenter using a key.Feature may be canceled at a remoteconsole or other control point.
� Electrical/mechanical controlcabinet – Electrical switches may beordered to provide control of eachdoor in addition to mechanicalfunction. These switches may be builtinto the mechanical release cabinet,or located remotely as needs dictate.1. Individual Push Button Unlocking.2. Group Switch – Provides group
unlocking.3. Power Cut-off Switch – Cuts
electric current to controls.Indication lamps may be installed inconjunction with switches to showdeadlocked closed or open status ofeach door. When used, indication isas follows:Red – Open or locked open.Green – Deadlocked closed.
� Custom graphic consoles – In manycases, it may be desirable to separateelectric controls from the mechanicalcabinet located near the cells. Forlarger installations, or those withparticular needs, custom-builtconsoles may be easily provided withfloor plan graphics screened on thecontrol panel, and an array ofspecialized features.
� Cell line cable – For applicationsusing a series of locking devices, acell line cable may be specified tointerconnect terminal strips in themechanical control/release cabinet toa plug connector at the dooroperating unit. Simplifies routing ofwire, and saves installation cost andtime.
� G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICES Drive: ManualRelease: Individual
and/or GangSecurityLevel: MediumKR.3 SLIDING DOOR
LOCKING DEVICE
FA Rev. 02-10 D19
For more information, please call 210.533.1231.
Specifications________� Unlocking system –
Type: Manual door movement.
Motor: 120 VAC, 60 HZ, or 24VDC.
Hanger and guides: 1/4" thicksteel.
Rollers: Cold formed steel.Rollers are mounted on hardenedball bearings protected byinternal grease shields.
Finish: USP.
� Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel,
hinged to cover.
Vertical lock column housing:7-gauge steel.
Mechanical release column(optional): 7-gauge steel.
Wire tray: 16-gauge steel tray.
Front receiver: 10-gauge steel.
Finish: USP.
FOLGER ADAM LOCKING DEVICESDrive: ManualRelease: Individual
and/or GangSecurityLevel: Medium KR.3 SLIDING DOOR
LOCKING DEVICE
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
Typical KR.3 slope-top elevation.Left hand (LH) as shown.
Right hand (RH) opposite as shown.
BLANK PAGE
FA Rev. 02-10 D21
For more information, please call 210.533.1231.
Introduction_____________In most cell door locking devicesystems, a combination of electrical andmechanical controls are needed toprovide day-to-day operation andpermit inmate movement. Electricalcontrols offer selective operation undernormal circumstances and should bespecified separately from lockingdevices or operators. To provideoperation in event of emergency orpower failure, mechanical releasecabinets are offered. These permitrelease of rows or tiers of cell doors formanual opening and allow egress. Indesigning a security system, mechanicalcabinets should be located in a securearea, contiguous to the cell run or tier tobe controlled.
Functions_______________Mechanical Only
In a basic mechanical cabinet, a singlelever control allows staff to unlock agroup of cell doors. In the lockedposition, the locking mechanism of theoverhead device is engaged and alldoors are locked. When the lever is inthe unlocked position, the mechanismsare disengaged and doors may beopened manually. Consult the productpages in this section for the methodapplicable to the device you arespecifying.
In a basic cabinet, one lever locks orunlocks the locking system of a groupof doors. Cabinet size and configurationmay easily be customized to yourspecific application. In situationsrequiring control of multiple cell runs ortiers, additional lever controls may be
FOLGER ADAM LOCKING DEVICES
MECHANICAL CONTROL CABINETS
Mechanical Release Cabinet with folding telescopic handles (shown with door open). Release leverhandles vary with the number of devices they release.
Electromechanical Control Cabinet with electrical switching (door open).
(continued)
D22 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
added to allow single locationoperation. A maximum of eight leversmay be combined into a singlemechanical cabinet. With the cabinetdescribed above, electric operation, oropening and closing of the individualcell doors, would be accomplished byelectrical switch, key switch, pushbutton, or other actuation methodexternal to the cabinet.NOTE: In cases where a mechanical cabinet isnot specified to accompany locking devices, thedevices are provided with special covers andhousings which permit access to the mechanismfor manual unlocking of each individual door.
For individual mechanical operation inemergency or power failure, the cellrelease ports are opened from themechanical cabinet. These ports provideaccess to a manual release systemwhich is operated by a “T” handle, andreleases individual doors. Refer toproduct pages as this feature is notavailable on all locking devices.
Mechanical/Electrical Operation
The custom nature of control cabinetsallows the facility planner to combineelectrical controls and mechanicalrelease in the same cabinet. In this way,control/operation, and door statusindication are centralized for staff safetyand convenience, and the mechanicaloperation serves as a gang release or
emergency release. Cabinets withelectrical and mechanical controls offeroperational versatility. When electricalcontrols are built into the same cabinetas the mechanical controls, each cell runor tier has two levers assigned. The firstis the lock/unlock lever, the secondselects mechanical operation in oneposition, and electrical operation in theother. Long runs of cells may requirethe addition of breech handles, or acrank and gear box to the cabinet.Release cabinets can be built forvirtually any application. Consult with usearly in the planning stages of yourproject for assistance.
Additional Data_________Mechanical control cabinets areconstructed of heavy duty materials,and the cabinet doors are secured bydetention-quality, lever tumbler locks.Specifications are given on productpages in this section. The followingillustrations show typical mechanicalcontrol cabinets and provide generalinformation. This information is forreference only. Please contact us withyour specific application requirements.
FOLGER ADAM LOCKING DEVICES
MECHANICAL CONTROL CABINETS
(continued from previous page)
FA Rev. 02-10 D23
For more information, please call 210.533.1231.
Description______________Type D Operators are high security,motorized door operating systems foruse with doors weighing up to 450pounds.
NOTE: Units may be adapted to operatedoors up to 1,000 pounds
Applications_____________Type D Operators should be specifiedfor entrances, security vestibules, orcorridor doors in maximum securityareas. May also be specified for exteriorpedestrian gate applications.
Functions________________Unit unlocks, opens and locks open; orunlocks, closes and deadlocks closed,an individual door.
Movement of a door may be stopped inmid-travel to reverse its direction. Wheninterrupted, the door is not free-wheeling.
Interlocking: Any door not closed anddeadlocked will also prevent electricoperation of all other interlocked doors.
Manual emergency locking, unlockingand operation is accomplished by aclutch release and crank located in thelocking column.
Locking System__________The door automatically deadlocksclosed at two concealed points at therear edge of the door. Lockingcomponents are not exposed at thefront edge of the door and, therefore,not subject to tampering. Nocomponents project into the dooropening.
Testing__________________Type D Operators have been in servicesince 1949, and tested to 500,000cycles.
Standard Features_______� Motor voltage – 208 VAC.� Rugged chain drive – Provides
consistent action of the door under avariety of conditions and installationvariables.
� Heavy duty construction – Type DOperators are ruggedly built for arange of detention environments.
� Tamper-resistance – All openings inhousings are baffled to precludeinmate tampering.
� Sloped-top housing – Resists hidingof contraband.Flat-top housing is provided whereoperator must install close to ceiling.
� Automatic deadlocking – Doorsautomatically deadlock at twoconcealed points at the rear of thedoor on closure.
� Indication switch – An internal switchmonitors deadlocked condition ofboth locking points
� Terminal strip – All internalcomponents are pre-wired to aterminal strip. The strip is also usedfor ease of field wiring.
� Adjustable friction clutch – In case ofdoor blockage, clutch slips untilobstruction is removed. If notremoved, power to the motor is cut toavoid damage. Adjustment isprovided to compensate for varioussizes and weights of doors.
� Emergency manual unlocking andoperation – In event of power failure,unlocking the column provides accessto the release mechanism. The doormay then be operated by hand crank.
� G90 galvanized finish.
Optional Features________� Electrical control cabinet – Control
cabinets may be furnished to houseall wiring and switches for each doorcontrolled. Three push buttons areprovided for each door, labeled:OPEN-CLOSE-STOP. Two indicatorlamps above the push buttonsindicate door position:Red – OPEN.Green – CLOSED and deadlocked.
FOLGER ADAM LOCKING DEVICESDrive: Roller ChainRelease: Remote Electric,
Local MechanicalSecurityLevel: Maximum D CORRIDOR
DOOR OPERATOR
D24 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Electrical interlocking – Wiring andadaptations may be made to permitinterlocking of two or more doors in asallyport or vestibule application.Prevents electric operation of anyother interlocked door.
� Custom graphic consoles – In manycases, corridor operators are merelyone part of a complete securitysystem. For larger installations, orthose with particular needs, custom-built control consoles may be easilyprovided with floor plan graphicsscreened on the control panel, and anarray of specialized features.
� Tandem wheel assemblies for doorsover 500 lbs. or excess width.
FOLGER ADAM LOCKING DEVICES Drive: Roller ChainRelease: Remote Electric,
Local MechanicalSecurityLevel: MaximumD CORRIDOR
DOOR OPERATORSpecifications_________� Drive system –
Type: Roller chain.Motor: 208 VAC, 60 HZ, 1/4 HP.Roller chain: #41 size.Hanger and guides: 1/4" thicksteel.Rollers: Anti-friction ball bearingwith hardened members andgrease shield.Roller studs: High alloy steelwith self-locking nut.Finish: USP.
� Mechanism housing/covers –Housing: 7-gauge steel.Housing covers: 10-gauge steel.Vertical lock column housing:7-gauge steel.Vertical lock column covers:10-gauge steel.Mechanical release column:7-gauge steel.Front receiver: 10-gauge steel.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.
The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
FA Rev. 02-10 D25
For more information, please call 210.533.1231.
Description______________D2B.3 Operators are high securitylocking and operating systems forindividual sliding doors with a maximumweight not exceeding 450 pounds.
Applications_____________D2B.3 Operators should be specified forsecurity entrances, safety vestibules,corridor doors, or sallyports whereremote electric control and chain driveare desirable.
Functions________________Unit unlocks, opens and locks open; orunlocks, closes and deadlocks closed acorridor door. A door stopped in mid-travel may be opened or closedmanually. Direction of movement of adoor may be reversed electrically. Inevent of blockage, a torque limiter slipsto prevent motor damage. Whenobstruction is removed, the door willautomatically continue movement to theopen or closed position. Pressureexerted by a door in travel is factory-setto approximately 40 pounds.
Individual doors may be manuallyunlocked at the door.
Locking System__________Doors operated by Type D2B.3Operators deadlock closed automaticallyat two points on the rear edge of thedoor. When opened, doorsautomatically lock in the open position.Locking components are not exposed orsubject to inmate tampering. Nocomponents project into the dooropening.
Testing__________________D2B Series Operators have been in
service since 1966, and tested to500,000 cycles.
Standard Features_______� Motor voltage – 120 VAC.� Rugged chain drive – Roller chain
provides consistent action of the doorunder a variety of conditions andinstallation variables.
� Heavy duty construction – D2B.3Operators are ruggedly constructedfor the detention environment.
� Tamper-resistance – Openings inhousings are baffled to precludeinmate tampering.
� Adjustable torque limiter – Absorbsstart-up and closing shocks byisolating the motor. Allows pressureexerted by the motor to be set to theneeds of an individual door.Adjustment is provided tocompensate for various sizes andweights of doors.
� Sloped-top housing – Resists hidingof contraband.Flat-top housing is provided whereoperator must install close to ceiling.
� Automatic locking – Doors lockautomatically at two points.
� Indication switch – Monitors thedeadlocked condition of both lockingpoints.
� Remote, electric unlocking – Eachdoor is controlled by a three-positionswitch. (OPEN-OFF-CLOSE).
� Emergency manual unlocking – Inevent of power failure, a release portmay be opened by paracentric key.This action allows use of a “T” handleto unlock the door, and move it byhand-applied pressure. The door mustbe moved (restarted electrically or
mechanically) to the open or closedposition to lock.
Optional Features________� Door receiver column – A hinged
door locking column which places themechanical release mechanismapproximately 3'6" from the floor.
� Location of mechanical releasemechanism – (Release Port) Thelocked housing allows access to therelease mechanism on the reverseside of the overhead housing.
� Electrical control cabinet – Providesa three-position switch for eachcorridor door, accompanied by redand green indication lamps. Operating switches are labeled:OPEN-OFF-CLOSED. Indication lamps are labeled:Red – OPEN., Green – CLOSED.A two-position power cut-off switch isalso installed to cut power to thecontrols.
� G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICESDrive: Roller ChainRelease: Remote Electric,
Local MechanicalSecurityLevel: Maximum D2B.3 CORRIDOR
DOOR OPERATOR
D26 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Electrical interlocking – Wiring andadaptations may be made to permitinterlocking two or more doors in asallyport or vestibule application.Prevents electric operation of anyother interlocked door.
� Custom graphic consoles – In manycases, corridor operators are merelyone part of a complete securitysystem. For these larger installations,or those with particular needs,custom-built consoles may easily beprovided with floor plan graphicsscreened on the control panel, and anarray of specialized features.
Dimensional Data_______NOTE: If the optional mechanicalrelease column is used, the 3"minimum at the front of the door isincreased to the 7" width of themechanical release column and the“No. 12 lock access to mechanicaloperation” is omitted from theremovable housing cover.
Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
FOLGER ADAM LOCKING DEVICES Drive: Roller ChainRelease: Remote Electric,
Local MechanicalSecurityLevel: MaximumD2B.3 CORRIDOR
DOOR OPERATORSpecifications_________� Drive system –
Type: Roller chain.Motor: 120 VAC, 60 HZ, 1/10 HP.Roller chain: #41 size.Hangers and guides: 1/4" thicksteel.Rollers: Anti-friction ball bearingswith hardened members and grease shield.Roller studs: High alloy treated steelwith self-locking nut.Finish: USP.
� Mechanism housing/covers –Housing: 7-gauge steel.Housing covers: 10-gauge steel.Vertical lock column housing:7-gauge steel.Vertical lock column cover:10-gauge steel.Front receiver: 10-gauge steel.Mechanical release column(optional): 7-gauge steel.Finish: USP.
Typical D2B.3 slope-top elevation.Left hand (LH) as shown.
Right hand (RH) opposite as shown.
FA Rev. 02-10 D27
For more information, please call 210.533.1231.
Description______________Type D3B.2 Operators are high securitylocking and operating systems forindividual sliding doors to a maximumweight of 350 pounds.
Applications_____________D3B.2 Operators should be specified forsecurity entrances, corridor doors, safetyvestibules, or sallyports where remoteelectric control and precise rack andpinion drive are desirable.
Functions________________Unit unlocks, opens and locks open; orunlocks, closes and deadlocks closed,an individual door.
A door stopped in mid-travel may beopened or closed manually. Direction ofmovement of a door may be reversedelectrically. In event of blockage, atorque limiter prevents motor damage.When obstruction is removed, the doorwill automatically continue movement tothe open or closed position. Pressureexerted by a door in travel is factory-setto approximately 40 pounds.
Blockage of a door will not cause motordamage. When obstruction is removed,the door continues movement to theopen or closed position.
Individual doors may be mechanicallyunlocked at the door.
Locking System__________The door automatically deadlocksclosed, and locks open at two points onthe rear edge of the door. Lockingcomponents are concealed, and notsubject to inmate tampering.
Components do not project into thedoor opening.
Testing__________________D3B Series Operators have been inservice since 1972, and tested to500,000 cycles.
Standard Features_______� Motor voltage – 120 VAC.� Precise, rack and pinion gear drive.� Heavy duty construction – D3B.2
Operators are ruggedly built for thedetention environment.
� Tamper-resistance – All openings inhousings are baffled to precludeinmate tampering.
� Sloped-top housing – Eliminateshiding of contraband. Flat-top housingis provided where operator mustinstall close to ceiling.
� Automatic deadlocking – When fullyclosed, top and bottom locking pointson the rear of each door are forceddown into deadlock.
� Indication switch – An internal switchmonitors the deadlocked condition ofboth locking points.
� Remote, electric unlocking – Eachdoor is controlled by a three-positionswitch. (OPEN-OFF-CLOSE).
� Emergency manual unlocking – Inevent of power failure, a release portmay be opened by paracentric key.This action allows use of a “T” handleto disengage motor. The door maythen be manually moved to open orclosed position.
Optional Features________� Door receiver column – Provides for
location of mechanical releasemechanism approximately 3'6" fromthe floor, and provides rod release fordisengagement of rack and pinion formanual door movement.
� Electrical control console – Providesa three-position switch for eachcorridor door, accompanied by redand green indication lamps. Operatingswitches are labeled: OPEN-OFF-CLOSED. Indication lamps are labeled:Red – OPEN, Green – CLOSED.A two-position power cut-off switch isalso installed to cut power to thecontrols.
� Interlocking – Wiring and adaptationsmay be made to permit interlockingtwo or more doors in a sallyport orvestibule application. Preventselectrical operation of any otherinterlocked door.
� Custom graphic consoles – In manycases, corridor operators are merelyone part of a complete security
FOLGER ADAM LOCKING DEVICESDrive: Rack and PinionRelease: Remote Electric,
Local MechanicalSecurityLevel: Maximum D3B.2 CORRIDOR
DOOR OPERATOR
(continued)
D28 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
system. For these larger installations,or those with particular needs,custom-built consoles may be easilyprovided with floor plan graphicsscreened on the control panel, and anarray of specialized features.
� G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICES Drive: Rack and PinionRelease: Remote Electric,
Local MechanicalSecurityLevel: MaximumD3B.2 CORRIDOR
DOOR OPERATORSpecifications________� Drive system –
Type: Rack and Pinion.Gear motor: 120 VAC, 60 HZ,1/10 HP.Hanger and guides: 1/4" thicksteel.Rollers: Anti-friction ball bearingswith hardened members andgrease shield.Roller studs: High alloy treatedsteel with self-locking nut.Finish: USP.
� Mechanism housing/covers –Housing: 7-gauge steel.Housing covers: 10-gauge steel.Vertical lock column housing: 7-gauge steel.Vertical lock column cover:10-gauge steel.Door receiver column (optional): 7-gauge steel,equipped with 12 Series lock.Front receiver: 10-gauge steel.Finish: USP.
Dimensional Data_______NOTE: If the optional mechanicalrelease column is used, the 3"minimum at the front of the door isincreased to the 7" width of themechanical release column and the“No. 12 lock access to mechanicaloperation” is omitted from theremovable housing cover.
Note: Dimensions are for informationand planning purposes only, and should not be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
(continued from previous page)
FA Rev. 02-10 D29
For more information, please call 210.533.1231.
Description______________Type D5B Operators are high security,motorized locking and operatingmechanisms for individual sliding doorsnot exceeding 450 pounds.
Applications_____________D5B Operators may be specified for usein safety vestibules, corridors, orentrances requiring both remote andlocal control, together with reliablechain drive. Recommended for high-usage entryways or corridors.
Functions_______________Unit unlocks, opens and locks open; orunlocks, closes and deadlocks closed acorridor door.
A door stopped in mid-travel may beopened or closed manually.
Direction of movement of a door maybe reversed electrically.
In event of blockage, a torque limiterslips to prevent motor damage. Whenobstruction is removed, the door willautomatically continue movementtoward the open or closed position.Pressure exerted by a door in travel isfactory set to approximately 40 pounds.
In event of power failure, door may bereleased from a column at the doorlocation by use of a paracentric key. Thedoor may then be moved manually toan open position.NOTE: The same key will operate the doorelectrically under normal conditions.
Locking System__________Doors automatically deadlock at twopoints at the rear of the door. Locking
components are fully concealed, andnot subject to inmate tampering.
Local mechanical/electrical control ofthe door is accomplished by an 80Series lock in an adjacent column.
Testing__________________D5B Operators have been in servicesince 1978, and tested to 500,000cycles.
Standard Features_______� Motor voltage – 120 VAC.� Rugged chain drive – Roller chain
provides sure action of the doorunder a variety of conditions andinstallation variables.
� Heavy duty construction – D5BOperators are ruggedly built for thedetention environment.
� Tamper-resistance – Openings inhousings are baffled to precludeinmate tampering.
� Adjustable torque limiter – Absorbsstart-up and closing shocks byisolating motor. Allows pressureexerted by the motor to be set to theneeds of an individual door.Adjustment is provided tocompensate for various sizes andweights of doors.
� Sloped-top housing – Resists hidingof contraband.Flat-top housing is provided whereunit must install close to ceiling.
� Automatic locking – Doorsautomatically lock at two points.
� Indication switch – Monitorsdeadlocked condition of both lockingpoints.
� Remote, electric unlocking – Eachdoor is controlled by a three-positionswitch: OPEN-OFF-CLOSE.
� Local electric key operation – Use ofa paracentric key at the door columnactivates an electrical circuit openingthe door. Turning the key one-quarterturn to the right opens the door;returning the key to center positioncloses the door.
� Emergency mechanical unlocking –In event of power failure, prisonparacentric key unlocks the door witha full 180° turn. Door is then movedmanually.
Optional Features________� Interlocking – Wiring and adaptations
may be made to permit interlockingof two or more doors in a sallyport orvestibule application. Prevents electricoperation of any other interlockeddoor.
� G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICESDrive: Roller ChainRelease: Remote Electric &
Local Electric & MechanicalSecurityLevel: Maximum D5B CORRIDOR
DOOR OPERATOR
D30 Printed in USA FA Rev. 12-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Custom graphic consoles – In manycases, corridor operators are merelyone part of a complete securitysystem. For larger installations, orthose with particular needs, custom-built consoles may be easily providedwith floor plan graphics screened onthe control panel, and an array ofspecialized features.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
FOLGER ADAM LOCKING DEVICES Drive: Roller ChainRelease: Remote Electric &
Local Electric & MechanicalSecurityLevel: MaximumD5B CORRIDOR
DOOR OPERATORSpecifications_________� Drive system –
Type: Roller chain.Motor: 120 VAC, 60 HZ, 1/10 HP.Roller chain: #41 size.Hanger and guides: 1/4" thicksteel.Rollers: Anti-friction ball bearingswith hardened members andgrease shield.Roller studs: High alloy steelwith self-locking nut.Finish: USP.
� Mechanism housing/covers –Housing: 7-gauge steel.Housing cover: 10-gauge steel.Vertical lock column housing: 7-gauge steel.Vertical lock column cover:10-gauge steel.Mechanical release column: 10-gauge steelFinish: USP.
FA Rev. 02-10 D31
For more information, please call 210.533.1231.
Description______________Type DKR.3 Operators are mediumsecurity, unlocking systems for slidingcorridor doors not exceeding 300pounds.
Applications_____________DKR.3 Operators may be specified forany corridor or entrance door requiringremote electric unlocking with manualmovement of the door to open orclosed position.
Functions________________Unit unlocks a door from a remotelylocated control console by push button,and the door starter pushes the dooropen a few inches. It may then beopened the rest of the distancemanually.
Individual doors may be opened byprison paracentric key at the releasecolumn.
Locking System__________Doors automatically snaplock anddeadlock upon closure at two points onthe top and bottom rear of the door.Locking components are completelyconcealed, and not subject to inmatetampering. Components do not projectinto door opening.
Testing__________________DKR Series Operators have been inservice since 1978, and tested to500,000 cycles.
Standard Features_______� Motor voltage – 120 VAC.� Individual motor operation – Each
door is unlocked by its own motor.� Heavy duty construction – DKR.3
Operators are ruggedly built for thedetention environment.
� Tamper-resistance – All housingopenings are baffled to precludeinmate tampering.
� Sloped-top housing – Eliminateshiding of contraband.Flat-top housing is provided whereoperator must install close to ceiling.
� Automatic deadlocking – Unitssnaplock and automatically deadlockwhen closed.
� Indication switch – Monitors thedeadlocked condition of both lockingpoints.
� Mechanical release – A No. 12Deadlock in the release columnprovides mechanical unlocking of themechanism.
Optional Features________� Key switch operation – An
electrically operated key switch maybe added to the release column forlocal electric operation.
� Electric controls – A control consolewith push button switch, red andgreen indication lamps, and powercut-off switch may be provided.
� Interlocking – Wiring and adaptationsmay be made to permit interlockingof two or more doors in a sallyport or
vestibule application. Preventselectrical operation of any otherinterlocked door.
� Custom graphic consoles – In manycases, corridor operators are merelyone part of a complete securitysystem. For these larger installations,or those with particular needs,custom-built control consoles mayeasily be provided with floor plangraphics screened on the controlpanel, and an array of specializedfeatures.
� G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICESDrive: ManualRelease: Remote Electric &
Local MechanicalSecurityLevel: Medium/Maximum DKR.3 CORRIDOR
OPERATOR
D32 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM LOCKING DEVICES Drive: ManualRelease: Remote Electric &
Local MechanicalSecurityLevel: Medium/MaximumDKR.3 CORRIDOR
OPERATORDimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
Specifications_________� Unlocking system –
Type: Manual.
Motor: 120 VAC, 60 HZ.
Hanger and guides: 1/4" thicksteel.
Rollers: Anti-friction ball bearingswith hardened members andgrease shield.
Finish: USP.
� Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel.
Vertical lock column housing:7-gauge steel.
Vertical lock column cover:10-gauge steel.
Mechanical release column:7-gauge steel with 10-gauge steelfront receiver.
Finish: USP.
FA Rev. 02-10 D33
For more information, please call 210.533.1231.
Description______________Type G Operators are maximumsecurity, motorized sliding gateoperators for single or double (bi-parting) gates up to a maximum 24'width. Single gates should not exceed6,000 pounds, double gates should notexceed 6,000 pounds total.
Applications_____________G Operators are applicable to anyexterior entrance for passenger vehiclesor trucks.
Functions________________Unit unlocks and opens or closes andlocks a single door from a set of remotepush buttons: OPEN-CLOSE-STOP.
The bi-parting G Operator is manuallylocked or unlocked at the door by acremone bolt located in the gates. Thegates may then be operated from aremote set of push buttons: OPEN-CLOSE-STOP.
In event of emergency or power failure,doors may be mechanically unlocked byprison paracentric key and handcranked to open or closed position.
Gate movement may be stopped inmid-travel and restarted in the desireddirection by pressing the appropriatepush button.NOTE: When closed, it is impossible to move thegate except by electrical or mechanical methods.
Locking System__________Single Door Model: Secured by an 800Series lock located in a column at thefront of the door. (See Electric LockSection for details.)
Bi-parting Door Model: Secured bycremone bolts operated by prisonparacentric key. (See Mechanical LockSection for details.)
Testing__________________G Operators have been function tested,and in service since 1958.
Standard Features_______� Motor voltage – 120/208 VAC.� Rugged chain drive – Provides
consistent action of the door under avariety of conditions and installationvariables.
� Heavy duty construction –G Operators offer welded steel
construction and rugged componentsfor durability in exterior applications.
� Self-supporting – Heavy columns andbeams combine to make the structureself-supporting.
� Control station – Three push buttons(OPEN-CLOSE-STOP) provide remoteoperation. Red and green indicatorlights show open and closedcondition (respectively) of gates.
� Interlock feature – Two or moreoperators may be electricallyinterlocked so that only one may beunlocked and operated at a time.
FOLGER ADAM LOCKING DEVICESDrive: Roller ChainRelease: Remote Electric &
Local MechanicalSecurityLevel: Maximum G OPERATORS
SINGLE AND BI-PARTING GATES
D34 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Emergency mechanical operation –In event of power failure unlockingthe column provides access to therelease mechanism. The door maythen be opened by hand crank.
Optional Features________� Custom graphic consoles – In many
cases, operators are merely one partof a complete security system. Forthese larger installations, or those withparticular needs, custom-builtconsoles or touchscreen controls maybe easily provided with floor plan andspecial feature graphics.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
Specifications_________� Drive system –
Type: Roller chain.
Motor: 120/208 VAC, 60 HZ, 1-1/2 HP.
Roller chain: #60 size.
Trolley hangers: 3 ton capacity.
Locking column: 7-gauge steelplate construction with swinging-type door equipped with two #3hinges, and secured by an 80Series Deadlock.
� Mechanism housing/covers –
Mechanism cover: 7-gauge steelplate.
Housing: 7-gauge steel plate.
Gate guides: 5" I-beam with forgedand welded steel guides.
Finish: USP except track, rollersand drive mechanism.
Trolley track: 8" I-beam x 23pounds.
Support beams: 6" WF beam x 20 pounds.
FOLGER ADAM LOCKING DEVICES Drive: Roller ChainRelease: Remote Electric &
Local MechanicalSecurityLevel: MaximumG OPERATORS
SINGLE AND BI-PARTING GATES
FA Rev. 02-10 D35
For more information, please call 210.533.1231.
Description______________Type J Operator is a medium securityoperating and locking system forstandard 14'H x 14'W chain link fencegates. Units may be supplied for gatesto a maximum of 16'H x 30'W,maximum weight, 1,000 pounds.Medium security designation is appliedfor chain-link fence constructionapplications.
Applications_____________Type J Operators are applicable tovehicular entryways for perimetercontrol. Two or more operators may beinstalled and interlocked to createvehicular sallyports permitting a securelocation for inspection of vehicles andpassengers.
Functions________________Unit unlocks, opens; or closes anddeadlocks a gate electrically, from aremote push button station. Whenclosed, it is impossible to move the gateexcept by electrical or mechanicalmethods.
Movement of a gate in either directionmay be stopped and re-started bypressing the appropriate push button.
Mechanical movement of the gate isaccomplished by a hand crank in therelease column in the event of powerfailure or emergency.
Locking System__________On closure, locking is accomplished bymeans of a keyless locking device whichengages the gate at three locations inthe locking column. In the open
position, all openings in the lockingcolumn are completely closed toprevent tampering.
Testing__________________Type J Operators have been in servicesince 1955, and tested to 500,000cycles.
Standard Features_______� Motor voltage – 208 VAC.� Rugged chain drive – Provides
consistent action of the gate under avariety of conditions and installationvariables.
� Heavy duty construction – Weldedsteel construction coupled withcolumn and H-beam support assuredurability.
� Tamper-resistance – Drive system isself-contained, mechanism is enclosedwhen the gate is open.
� Adjustable friction clutch – Protectsthe motor in the event of blockage. Ifobstruction is not removed, power tothe motor is cut off. Adjustment isprovided to compensate for varioussizes and weights of gates.
� Automatic deadlocking – Occurswhenever the gate is closedelectrically or manually.
� Three-point locking – Gate is lockedalong leading edge in three locationsfor security.
� Weather-resistant construction –Housings and covers are designedspecifically for exterior application.
� Corrosion-resistant working parts –Critical operating parts are made ofcorrosion-resistant materials forreliability.
FOLGER ADAM LOCKING DEVICESDrive: Roller ChainRelease: Remote Electric &
Local MechanicalSecurityLevel: Medium J OPERATORS
SLIDING FENCE GATE
D36 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
� Emergency manual operation –In event of power failure, hand crankoperation opens or closes the gate.
� Interlocking – When two or moreoperators are used, interlockingfeature allows electrical opening ofonly one gate at a time.
� Attachment points – Standard pipeflanges atop the mechanism trackpermit attachment of barbed wire.
Optional Features________� Operating voltage – 120 VAC, 60 HZ,
1 phase� Gate width – Operators may be
specified for gate sizes up to 16' highand 30' wide.
� Control station – Three push buttons(OPEN-CLOSE-STOP) provide remoteoperation. Red and green indicatorlights show open and closedcondition (respectively) of gates.
� Custom graphic consoles – In manycases, operators are merely one partof a complete security system. Forthese larger installations, or those withparticular needs, custom-builtconsoles or touchscreen controls maybe easily provided with floor plan andspecial feature graphics.
Dimensional Data_______Note: Dimensions are for informationand planning purposes only, and shouldnot be used as templates.The illustration shown is intended for generalinformation and planning purposes only. FolgerAdam locking devices are fabricated to thedesign of the facility.
Specifications_________� Drive system –
Type: Roller chain.
Roller chain: #40 size.
Motor: 208 VAC, 60 HZ, 3 phase 1/3 HP.
Motor housing: 7-gauge steel.
Cover: 10-gauge steel.
Support structure: Two 8" x 13.75"steel channels.
Center and aft support columns:4-1/2" OD x 4" ID.
Locking column: 4" x 4" x 13" H-beam.
Emergency release column:7-gauge steel, hinged access doorequipped with No. 12 Deadlock.
Finish: USP.
FOLGER ADAM LOCKING DEVICES Drive: Roller ChainRelease: Remote Electric &
Local MechanicalSecurityLevel: MediumJ OPERATORS
SLIDING FENCE GATE
FA Rev. 02-10 E1
For more information, please call 210.533.1231.
Folger Adam door hardware affordssuperior quality and durability. Applyingadvanced technologies in ourengineering and manufacturingtechniques, consistent strength andendurance under the abusive conditionsprevalent in the detention environmentis assured.
Qualification ofSecurity Levels__________The security level of any hardware itemis determined by its ability to endure inthe specific environment in which itoperates, the level of supervision whereit is installed, and other factors. Nosingle standard exists in the industrytoday that clearly defines the variouslevels of security. The terms, minimum,medium and maximum, describe therelative relationship of products to oneanother.
Many products carry level-of-securitydesignations or ranges. Thesedesignations are Southern FolgerDetention Equipment Company’sevaluation of the ability of the product
to withstand the rigors probable in thatparticular security level. Physicalstrength, tamper-resistance, andconstruction features of the productsare considered in reaching thepublished levels. Because a number ofvariables affect security level, thedesignations in this catalog should beconsidered as guidelines only.
Hardware Security_______Proper care of door hardware helps tomaintain total security. Hinges and doorpulls should be periodically checked fortampering. Escutcheons and head/footbolts should be examined for foreignmaterials that may affect operation. Thisis particularly important on doors leftopen for extended periods.
Templates_______________Templates are issued on job specificbasis only. Southern Folger does notissue registered template books.Templates will be issued upon receipt ofa valid purchase order and hardwareschedule.
Southern Folger reserves the right tomodify template information at any timeand without prior notice. When achange in templates occurs, material willbe shipped in accordance with thetemplates used for each specific job.
Dimensional drawings in this catalog arenot to be used for template information.
Installation Notes_______Door hardware items include mountingscrews. The proper mounting screw ismatched to the needs of the specifichardware item. Anchors, which may benecessary for installation of some items,are not provided, and must be obtainedfrom others.
If screws are replaced, the user shouldensure that fasteners of comparablesecurity are installed.
FOLGER ADAM ACCESSORIES
INTRODUCTION
E2 Printed in USA FA Rev. 07-12
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ACCESSORIES
ACCESSORIES SELECTIONGUIDE AND SECTION INDEX
MODEL DESCRIPTION DOOR TYPE PAGE
Escutcheons and Door Pulls
No. 1 Escutcheon N/A E-3
No. 2CS Cylinder Shield N/A E-3
No. 2 Raised Pull Swinging/sliding E-4
No. 4 Flush Pull Swinging/sliding E-4
Institutional and Prison Hinges
No. 3FS Full Surface Swinging E-5
No. 3FP Food Pass Swinging E-5
No. 4-1/2FM-ICS Full Mortise with Integral Cast Studs Swinging, hollow metal E-7
No. 4-1/2EH Full Mortise, Electric Hinge Swinging, hollow metal E-8
No. 5FS Full Surface Swinging E-5
No. 5HS Half Surface Swinging E-5
No. 5G Gap-type Swinging, grille door E-5
Head and Foot Bolts
105G Head and Foot Bolt Set Paired grille doors E-9
105HM Head and Foot Bolt Set Paired hollow metal door E-9
Door Position Indication Switches
523 Concealed Door Position Switch Swinging E11-E12
534 Door Position Switch Swinging E13-E14
ASSW-105A Indication Switch Swinging E-15
FA Rev. 02-10 E3
For more information, please call 210.533.1231.
Escutcheon Description__No. 1 Escutcheon: A heavy plate whichornaments and protects the door orframe around a lever tumbler lock.
Application______________Helps to prevent wear at the cylinderedge, and helps the user visually locatethe lock cylinder. Escutcheons areprovided either single wing (keyremovable in one position) or doublewing (key removable in two positions)as required by the lock functions.
Standard Features_______� Tamper-resistant screws –
Escutcheons and cylinder shields areprovided with two security screws.
� Finish – US32D.
Cylinder ShieldDescription______________No. 2 CS Cylinder shield: A swinging,protective cover for a lever tumbler lockcylinder. Interchangeable with anescutcheon, the shield has an aluminumspacer and cover.
Standard Features_______� Finish – US32D.
Application______________Keeps foreign matter out of the cylinder.Used on exterior doors to keep cold airand dirt from blowing into the cylinder.
Dimensional Data________NOTE: Dimensions above are forgeneral information and planningpurposes only and should not be usedas templates.
FOLGER ADAM ACCESSORIES
ESCUTCHEON ANDCYLINDER SHIELD
No. 1 Double wing shown No. 2 CS
E4 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
DescriptionDoor pulls provide a hand grasp, andallow movement of swinging or slidingdoors from one or both sides.
ApplicationPulls may be used on doors equippedwith jamb-mounted locks in inmaterooms, access panels, or any applicationwhere a pull is not an integral part ofthe lock. Flush pulls discourage inmatetampering because no part of the pullextends into the cell or dayroom door.
Standard Features_______No. 2 Raised Pull� Durable – Stainless steel.� Provided – With tamper-resistant
screws.� Finish – US32D.
No. 4 Recessed Pull� Rugged material – Stainless steel.� Finish – US32D.
Models Available________No. 2
All-purpose, handle-type pull forswinging doors. Supplied with two 3/8"-16 x 5/8" tamper-resistant, ovalhead screws.
No. 4
Flush mounted pull. Model 4-1S, singledirection finger grips, Model 4-1D, withbi-directional finger grips for slidingdoors. Supplied with four 1/4"-20 x 1/2"tamper-resistant flat head screws.
Dimensional Data________NOTE: Dimensions above are forgeneral information and planningpurposes only, and should not be usedas templates.
FOLGER ADAM ACCESSORIES
DOOR PULLS
No. 2 Pull No. 4 Pull
FA Rev. 07-12 E5
For more information, please call 210.533.1231.
Description______________Prison hinges are heavy weight for thedetention environment. They areconstructed for high abuse areas.
Applications_____________No. 5 Hinge
Use on cell or corridor doors, securityvestibule doors, and primary entrances.Also suitable for armories or drugstorage areas, or access panels in highabuse situations.
No. 3 Hinge
Use on moderate size doors, such asfood-pass doors, control or key cabinetdoors, and window grilles.
Standard Features_______No. 5 Hinge With Fasteners� Drop-forged steel leaves – 1/2"
thick.� Two thrust bearings – With 1/4"
hardened steel ball bearings andraces.
� Knurled, hardened hinge pin – 3/4" diameter steel, pressed into ablind hole. Tamper-resistant.
� Non-handed – Reversible.� Oil hole – In barrel of male leaf.� Mounting screws – Provided with six
1/2"-13 x 7/8" flat head steel securityscrews.
� Finish – USP or zinc.
No. 3 With Fasteners� Cast, malleable-iron leaves –
3/8" thick.� Knurled, hardened hinge pin –
3/8" diameter, pressed into a blindhole.
� Non-handed – Reversible.� Mounting screws – Provided with
four 3/8"-16 x 3/4" flat head steelsecurity screws.
� Finish – USP or zinc.
Optional Features________� Welded application – May be
ordered without holes for welding.
No. 5FS, HS and G� Finish – USP.
No. 5G also available in zinc plated.
No. 3FS� Finish – USP.
Models Available________� No. 5FS – Full-surface hinge for
hollow metal or steel plate doors.� No. 5HS – Half-surface hinge for
grille doors in heavy steel frames.� No. 5G – Gap-type hinge for doors in
grille frame.� No. 3FS – Full-surface hinge for
access doors/panels.� No. 3FP – Food-pass door hinge.
FOLGER ADAM ACCESSORIES
PRISON HINGES
Load Bearing Data_______No. 3 Hinge
2 hinges: 150 lbs.with screwsattached to door and frame.
Dimensional Data________NOTE: Dimensions above are forgeneral information and planningpurposes only and should not be usedas templates.
E6 Printed in USA FA Rev. 07-12
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ACCESSORIES
PRISON HINGES
Model Description Height Width Weight (lbs.)
5FS Full-surface hinge 5" 5-1/4" 6
5HS Half-surface hinge 5" 5-1/4" open 6
5G Gap-type hinge 5" 6-1/2" open 6
3FS Full-surface hinge 3" 4" 4
3FP Food pass hinge 3" 4" 4
TO ORDER, PLEASE CALL 210-533-1231Revised 12/11 SF7
SF 205FS: FULL SURFACE HINGE
SF 205G: GAP HINGE
APPLICATIONSwinging doors at cells, corridors,
plumbing chases, gates or other
locations where a higher degree of
security is required. Available in full
surface or gap type configuration.
Leaf configuration can be any
combination of solid leaf for weld-on or
pre-drilled leaf for bolt-on.
Continuous non-removable hardened
steel alloy pin. Smooth operating radial
and thrust polymer bearings.
TECHNICAL DATASize: 5"H x 4-1/2" W x 1/2" TK (FS)
5"H x 6" W x 1/2" TK (GAP)Weight: 5 lbs.Pin Size: 5/8" diameter.Barrel Size: 1-1/2" diameter.Barrels/Leaves: Cold rolled steel.Finish: USP.
Exceeds all criteria for ASTM F1758 for
detention hinges for Double Weight
Grade 1.
Made in USA.
Weight capacity 800 pounds per weld-on
hinge.
NOTE: These hinges are not direct
replacements for the Folger Adam #5
Hinge or the Southern Steel 205 Hinge
due to barrel size difference.
205 HINGEA C C E S S O R I E S
SOUTHERN FOLGER 205 HINGE
SF 205G:
GAP HINGE
SF 205FS:
FULL SURFACE HINGE
FA Rev. 02-10 E7
For more information, please call 210.533.1231.
Description______________Institutional hinges are investment-cast,detention strength, full-mortise hingesfor hollow metal doors and frames.
Application______________Model 4-1/2FM-ICS Hinges are suitablefor any detention door. Integral studs oneach leaf add to abuse-resistance.
CAUTION: For inmate safety, cell doorsshould swing out, placing exposedhinge surfaces away from the inmate.
Standards Compliance___4-1/2FM-ICS:ANSI/National Association ofArchitectural Metal Manufacturers(NAAMM) Standard HMMA 863-96requiring the hinge to withstand 200blows of 200 ft. lbs. each.
4-1/2FM-ICS hinges comply withrequirements of NFPA 80.
Standard Features_______� Investment-cast hinge leaves –
4-1/2FM-ICS, investment-cast stainlesssteel with 15/32" diameter, 1/2" longstuds on each leaf. Studs anchor thehinge to door and frame, and providesupport even if screws are sheared.
� Non-removable fully concealed pins – Prevents tampering orremoval.
� Tamper-resistant mounting screws –Eight 1/4-20 x 1/2" flat head stainlesssteel screws are provided in US32D.
� Hospital tips – Tapered barrel endsfor inmate safety.
� Permanent lubrication – Eliminatesfield maintenance.
� Reversible – Non-handed. Screw holelocations conform to industrystandards (ANSI A156.7).
� Heavy door capacity – Three hingessupport a 300 lb. door.
Dimensional Data________Studs (4-1/2FM-ICS): 15/32" diameter,1/2" long.
NOTE: Dimensions above are forgeneral information and planningpurposes only and should not be usedas templates.
FOLGER ADAM ACCESSORIES
4-1/2FM-ICSINSTITUTIONAL HINGES
4-1/2FM-ICS
E8 Printed in USA FA Rev. 07-12
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Description______________Electric hinges are investment-cast,detention strength full-mortise hingesfor hollow metal doors and frames.They are designed to transmit electriccurrent from field wiring in a doorframeto an electric lock installed in the door.
Applications_____________Electric hinges may be specified for usein the detention environment onadministration area doors, or cell doors.Hinge is non-load-bearing. Use with3 ea. 4-1/2FM Institutional Hinges.
Standards Compliance___Meets UL634 requirements, Switches andConnectors. Uses UL recognized wire.
Screw hole locations conform to ANSIA156.7 standards.
Standard Features_______� Investment-cast hinge leaves –
0.188" thick, investment-cast stainlesssteel.
� Supplied – With eight 1/4-20 x 1/2"flat head tamper-resistant mountingscrews. Stainless steel screws areprovided for US32D finish.
� Stainless steel tubular pin – 9/16"diameter tubular pin allows wiring topass from jamb to door.
� Reversible – Non-handed. Screw holelocations conform to industrystandards.
Dimensional Data_______NOTE: Dimensions above are forgeneral information and planningpurposes only, and should not be usedas templates.
FOLGER ADAM ACCESSORIES
4-1/2EHELECTRIC HINGE
4-1/2EH
Description______________Head and foot bolts are manuallyoperated deadbolts mounted into thetop and bottom of the door. They areoperated by a spanner-type key.
Application______________Head and foot bolts are used to securethe inactive leaf of a pair of doors. Theymay be specified for hollow metal orgrille type doors.
Standard Features_______� Malleable iron case – For strength.
(The 7-gauge steel covers are omittedfor hollow metal doors, because thelock mechanism is protected by thedoor structure).
� Corrosion-resistant working parts –For durability.
� 3/4" throw, 1" diameter steeldeadbolt – Projects 3/8" from thecase when retracted in grille model,7/8" in hollow metal model.
� Tension mechanism – Prevents boltfrom unlocking by vibration.
� Non-handed – Reversible.� Supplied – With flat-head security
screws. Model 105G supplied with3/8"-16 x 3/4" screws; 105HMsupplied with 1/4"-20 x 3/4" screws.
� Finish – Zinc plated.
Models Available________� Model 105G – For grille doors.� Model 105HM – For hollow metal
doors.
Accessories_____________� 105-4B – Mortise head bolt keeper –
Forms a cavity to contain and protectthe head bolt. Includes flat head security screws for mounting.
� 105-4BL – Mortise head bolt keeperwith switch – Same as above, with aswitch for remote monitoring.Includes flat head security screws formounting.
� 105-FBR – Foot bolt receptacle –Receives and contains the foot bolt.Self-cleaning, spring-loadedmechanism, all brass construction.
� 105K – Spanner key – Locks andunlocks bolts.
Accessory StandardFeatures________________� Finish – Zinc plated.
Dimensional Data_______NOTE: Dimensions above are forgeneral information and planningpurposes only and should not be usedas templates.
FA Rev. 02-10 E9
For more information, please call 210.533.1231.
FOLGER ADAM ACCESSORIES
HEAD AND FOOTBOLTS
105G
105HM
MMooddeell DDeessccrriippttiioonn HHeeiigghhtt WWiiddtthh DDeepptthh WWeeiigghhtt105G For grille doors 5-3/8" 2-3/4" 1-7/8" 6105HM For hollow metal 5-3/8" 2-3/4" 1-1/2" 5105-FBR Foot bolt keeper 3-1/8" 1-5/8" diameter 1
BLANK PAGE
FA Rev. 02-10 E11
For more information, please call 210.533.1231.
FOLGER ADAM ACCESSORIES
Description______________A sensitive, door-actuated switch formonitoring the positions of a swingingdoor. It senses when a door is movedfrom its fully-closed position and allowsa signal to be sent to a remote location– activating an alarm and/or indicatinglights – or it can be used for electricalinterlocking.
Applications_____________This switch is recommended for anyindication/interlocking circuit, inconjunction with the indication switchesfor locks, for producing a “secure” signalthat a door is closed and locked –primarily for medium/minimum-securitydoors.
Ideal for all in-swinging door conditions,and can be used on either interior orexterior doors.
Operation_______________The indication switch is factory set andtrips when a 3'-0" wide door movesapproximately 3/8" away from thedoorstop. (A 1/4" allowance of doormovement is built into this setting,eliminating a false indication which maybe produced by shaking the door.) Afine adjustment for variations in fieldconditions is provided by an eccentricstud on the connecting arm.
As the door is opened, the slideconceals its opening in the track. Whenthe door is closed, the unit is fullyconcealed.
Standard Features_______� Mortise installation – Switch body
mortises into the header of astandard, 2" high door frame and thetrack mortises into the top edge of adoor.
� Fully concealed – Switch body andtrack are inaccessible when the dooris closed.
� Self-concealing slide and track –low-friction, nylon slide and extruded,aluminum track with a natural finish.
� Adjustable switch – An eccentric studon the connecting arm provides a fineadjustment of the switch for variationsin field conditions.
� Plug connector – A two-piece,electrical connector which permitsfield wiring, without having the switchpresent, and allows removal of theswitch, without disturbing the fieldwiring. The receptacle of thisconnector has 9" long wire leads andmay be sent to the job site for pre-wiring of the opening. When theswitch is installed, its connectorsimply plugs into the already-wired,field receptacle.
� Tamper-resistant screws are usedfor exposed locations.
� Handed – Specify either left hand(LH), for left-hand and right-hand-reverse doors; or right hand (RH), forright-hand and left-hand-reversedoors.
� Supplied with mounting screws,wiring diagram, template informationand installation/operation instructions.
523 FULLY CONCEALEDDOOR POSITION SWITCH
E12 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ACCESSORIES
Specifications_________� Switch-body case – 1/2" thick, zinc
plated cold-rolled steel with a 1/16"thick steel black zinc faceplate.
� Connecting arm – 5/16" thickstainless steel.
� Maximum allowable butt size –4-1/2" open width.
� Maximum door swing – 180°.
ElectricalCharacteristics________� Switch type and ratings – UL
listed, single-pole, double-throwtype (SPDT); rated for 10 amps @125 or 250 VAC.
� Color-coded wire leads –16" long.
Mounting Location_______The unique, self-concealing slide andtrack mortise into the top edge of thedoor, while the switch body mortisesinto the header of a standard, 2" highdoor frame (see inset below).
How to Order_______Specify:
1) Model number.
2) Handing.
523 FULLY CONCEALEDDOOR POSITION SWITCH
Model 523 concealed, door-position switchshown installed on a hollow-metal door frame,with the door in its fully-open position.
FA Rev. 02-10 E13
For more information, please call 210.533.1231.
FOLGER ADAM ACCESSORIES
Description______________Model 534 Door Position Switch is amechanically operated monitoringdevice for swinging hollow metal, plateor grille doors. Specify for use inmedium to maximum- securitylocations.
Application______________Model 534 is designed for use as part ofa remote electric unlocking andindication system. When wired in serieswith the indication switches of anelectric lock, the switch provides asecure indication of door position at aremote control panel or control console.Fits a standard 2" frame header.
Standards Compliance___Switches and wiring are UL recognized.
Standard Features_______� Pre-set adjustment – The switch is
factory set to trip when a 2'-6" doormoves 3/8" from its stop.
� Adjustable trip point – Simpleadjustments permit use with varioussize doors.
� Sloped-top design – Precludes hidingof contraband.
� Tamper-resistance – Housing bafflescombine with use of tamper-resistantand security screws.
� Heavy duty construction – Case andcover of 10-gauge hot rolled steel;switch actuator formed of 13-gauge,zinc plated cold rolled steel; baffle of16-gauge hot rolled steel.
� 180 degree door swing.� Universal mounting – The surface
actuator and unique trip mechanismwork on all applications, and may befield reset if needed.
� Lower cost installation – Surfacemounted door bracket mounts on ahollow metal door.
� Plug connector – Plug with 9" of wireallows pre-wiring of the junction box.
� Finish – Zinc plated.
534 DOORPOSITION SWITCH
E14 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
FOLGER ADAM ACCESSORIES
Specifications_________� Case and cover – 11 gauge steel.
� Actuator arm – 1/4" x 1" x 2"with 3/8" diameter steel pin.
� Actuator mounting assembly –1/4" x 7/8" x 2-1/2" with steelpost.
� Gauge line plate – 11 gaugesteel.
� Switch actuator – 13 gauge steel,zinc plated.
ElectricalCharacteristics________� Switch – SPDT type.
� Rating – 10 amps @ 125 VAC.
How to Order____________Specify:
1) Model number.
2) Handing.
3) Hinge gauge line dimensions:4-1/2" or 5" hinge.
Dimensional Data________Note: Dimensions are for informationand planning purposes only and shouldnot be used as templates.
534 DOORPOSITION SWITCH
FA Rev. 02-10 E15
For more information, please call 210.533.1231.
FOLGER ADAM ACCESSORIES
Descriptions_____________ASSW-105A Magnetic Switch:
A magnetically-actuated switch, servingprimarily as a sensing device, whichdetects the opening action of aswinging or sliding door – can also beused on windows. The switch contactsmortise into an ANSI-sized cutout in thedoorframe and its actuating magnetmortises into the edge of the door –fully concealed and physicallyinaccessible when door is closed. Thecontacts are activated when a door iswithin 1/4" of being fully closed, andswitches modes when the door movesthe magnet less than 1". The switch andmagnet bodies are made of die-castaluminum with a natural aluminumfinish.
ASSW-105AMAGNETIC SWITCH
ASSW-105A
ASSW-105ASingle-pole, double-throw type (SPDT).Rated for 1 amp @ 24 VAC 5/8 amp @ 24 VDC.Color-coded, wire leads: 12" long.
Electrical Characteristics_____________________________
BLANK PAGE
FOR MORE INFORMATION, PLEASE CALL 210-533-1231Revised 3/09
432 MIRRORSIZE: 17-1/4” H x 11-1/4” W x 1/4” TK
Stainless steel face plate is polished to a mirror finish whichapproximates that of glass. Onepiece formed mirror and framemount directly to wall. Mirrors aredesigned to accept 1/4-20 flat-head security fasteners.
OPTIONS:STEEL EMBED PLATE: Can besupplied by special order forinstallation on poured concrete ormasonry walls.
SECURITY ONE-PIECESAFETY MIRRORS
A C C E S S O R I E SSAFETY MIRRORS
SF1
090604SouthernFolger_final:INSIDE 8/21/09 5:23 PM Page 109
P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211Revised 3/09
407 SECURITY CLOTHES HOOKSIZE: 4” H x 4” D x 2-21/2” W
This special hook is designed with a collapsibleball joint. Constructed of 14 gauge stainlesssteel, the 407 can be riveted to wall plates orsteel walls, or it can be attached with the pro-vided fasteners. US32D finish.
408 SHELFSIZE: 6” H x 8” D x Specified LengthWEIGHT: varies(5.4 LBS. for an 8” shelf)
Constructed of 12 gauge steel plate, the 408 Shelf is flanged and gusseted forstrength and neat appearnce. It is available in 8”,16” and 24” lengths, with or without safety clothing hooks.
Specify:408-8 for 8” shelf408-16 for 16” shelf408-24 for 24” shelf
If safety clothing hooks are required undershelves, add the suffix “S” to the above numbers(e.g. 408-24S). One hook is provided for each8” of shelf length.
407 SAFETY HOOK
408 SHELF
A C C E S S O R I E SSAFETY HOOKAND SHELF
SF2
090604SouthernFolger_final:INSIDE 9/2/09 11:04 AM Page 110
FOR MORE INFORMATION, PLEASE CALL 210-533-1231Revised 3/09
KEY CABINETS6-60 KEY CABINET (60 key capacity)
6-300 KEY CABINET (300 key capacity)
6-720 300 KEY CABINET (720 key capacity)
SIZE: 16” W x 24” H x 6 5/8” D
WEIGHT: 6-60: 55 LBS.
6-300: 85 LBS.
6-720: 195 LBS.
Key cabinets provide security and control of
a large number of paracentric prison keys, or
Mogul-type keys. Cabinets may be provided
for surface or recessed mounting. Keys are
held on two sides of a swinging panel within
the enclosure. A printed index is provided for
recording the location of each key, and the
lock it operates. Available with a Southern
Steel 1010A or 1010AM lock.
420 DETENTION DOOR STOP
SIZE: 2” Dia. X 31/2” Bumper5/8-11 X 21/2” Post
Material: 90 durometer silicone
rubber body
with threaded steel post
Style: Wall or floor mount
Finish: Black
Mounting: Embed in concrete or
masonry
Heavy duty detention-grade door stop for
installation in either wall or floor with epoxy
resin adhesive. Threaded steel anchor post.
420 DETENTION DOOR STOP
A C C E S S O R I E SKEY CABINETSDOOR STOP
SF3
090604SouthernFolger_final:INSIDE 8/21/09 5:23 PM Page 111
P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211Revised 3/09
A C C E S S O R I E SPISTOLLOCKERS
600 PISTOL LOCKERSIZE: 1’ 4” x 10” D x Length RequiredWEIGHT: 35 lbs.(FOR A 3-COMPARTMENT LOCKER)
Pistol lockers are available in combinations ofthree compartments (up to a total of 12 compartments) in a single unit.Construction is 10 to 14 gauge steel. Eachcompartment is 5-1/4” H x 10” W x 10” D, bottom-lined with moth-proofed felt. Doorsswing on continuous hinges and each has aseparately keyed cam lock. Master keying isavailable by special order. These units can besurface mounted or built into a wall. Indicatetype of mounting required. Prime painted. Specify:600-3: 3-compartment600-6: 6-compartment600-9: 9-compartment600-12:F12-compartment
605 PISTOL LOCKER (TILT-OUT)SIZE: 1’ 10-1/2” H x 6” D x Length RequiredWEIGHT: 48 LBS.(FOR A 3-COMPARTMENT LOCKER)
Each compartment of the Model 605 tilts out for access on a continuous hinge. Construction is 7 to10 gauge steel. Compartments are 6” H x 1’ 1-1/2” W x 4-1/2” D, bottom-linedwith moth-proofed felt and locked with an individual keyed snaplock. Master keying isavailable by special order. Can be surfaced mounted or built in. Indicate type ofmounting required. Prime painted. Specify:605-3: 3-compartment605-6: 6-compartment605-9: 9-compartment605-12: F12-compartment
600 PISTOL LOCKER
605 PISTOL LOCKER
(TILT-OUT)
Model 600-12 shown
Model 605-6 shown
SF4
090604SouthernFolger_final:INSIDE 8/21/09 5:23 PM Page 112
FOR MORE INFORMATION, PLEASE CALL 210-533-1231Revised 3/09
Controls are consolidated into a single
s
o
Spare fuse holder s
SF5
The Southern Folger TestPro test unit is a
sturdy, portable unit for preventive maintenance
checks. With easy-to-read indicator lights, this
ergonomically designed test unit will operate all
current models of Southern Steel and Folger
Adam electric and pneumatic locks and locking
devices. Controls are consolidated into a single
set of switches for all lock functions.
Standard features include:
• Indication – Two sets of colored
indication lights are included on each
unit.
o Green Secure/Red Unsecure for
DPS indication
o Green Secure/Red Unsecure for
Auxiliary indication
• Fuse Protection – A 4-amp fuse is
mounted on the front of the test unit for
easy replacement. Spare fuse holder
stores replacement fuse.
• Voltage Selector – A key-operated,
multi-voltage selector switch allows
operation of 24VDC and 120VAC units.
• Cycle Type Selector–A key-operated
Cycle Type selector switch allows
operation of Half Cycle and Full Cycle
Devices.
• Three-position center-off control switch
allows open/close type testing. The
control switch is momentary contact,
spring loaded to the center-off position.
• Case – Ergonomically designed steel
case.
• Power Connection – all units are
equipped with a 3-prong, industrial-
rated 120VAC GFI power plug with
integral test and reset controls.
UNIVERSAL TEST UNITA C C E S S O R I E S
SOUTHERN FOLGER TESTPRO
090604SouthernFolger_final:INSIDE 8/21/09 5:23 PM Page 113
P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211Revised 3/09
A C C E S S O R I E S
SF6
The TestPro Unit can be used on the products listed below and also works on most non-standard products.If necessary, custom adaptors can be developed for use in testing of other devices.
TECHNICAL DATAPart No: 76710852
Indication: Door - Green Secure/Red UnsecuredAuxiliary - Green Secure/Red Unsecured
Controls: Keyed Voltage and CycleSelection
Supply Voltage: Standard 120 VAC Plug
Weight: 6 lbs
Dimensions: 8 1/2” x 5 3/8” x 4
Case: Fabricated Steel Enclosure
Lock Termination:• Integrated Lock Lead - 12-pin connector
to test most 24VDC and 120VAC FolgerAdam locks and devices.
• 12 Pin to Alligator Clip Adaptor – test locks and devices without Molex terminations.
• 12 Pin to 6 Pin Adaptor – test mostSouthern Steel Locks
• 12 Pin to 6 Pin Adaptor – test most Southern Steel Sliders
• 12 Pin to 12 Pin Adaptor – test Southern Steel 10300M
• 12 Pin to 12 Pin Adaptor – test SouthernSteel 10300MD
Option: Custom Adaptors can be created to
meet facility needs.
UNIVERSAL TEST UNIT
SOUTHERN FOLGER TESTPRO
SOUTHERN STEEL BRAND
24 VDC 120 VAC 24 VDC 120 VAC 1051M 1050D 8010L 3150LX 1051P 1051E 8050L 3165LX 10120AM 1051M 8065L 4110L 10300E 1058M 10300M 10120AE 10300P 10120AM 10600
FOLGER ADAM BRAND
24 VDC 120 VAC 24 VDC 120 VAC 51M 51E KR,KR.3 2B, 2B.3 50HBM 51M KR.3P 3B, 3B.3 50P 120E/M/MC 2B.3P KR 120M/MC/P 120ED D2B.3P D2B NS400 120RUP D3B,D3B.2 D9300
D5B
Locks Sliding Devices
Locks Sliding Devices
090604SouthernFolger_final:INSIDE 9/2/09 11:02 AM Page 114
FA Rev. 02-10 G1
For more information, please call 210.533.1231.
AC Alternating Current
ASSW Architectural Security Switch
BH Button Head
C Half Cycle Function
CPS Concealed Door Position Switch
DC Direct Current
DPS Door Position Switch
E Solenoid
EED Emergency Exit Device
EER Emergency Exit Release
ELC External Local Control
FH Flat Head
FP Food Pass
FS Full Surface
G Bar Grating
GAP Full Surface HingeReversed to Mount on Grating Doors
HM Hollow Metal
HS Half Surface
K Standard Knob
KCE Key Cylinder Extender
KS Key Switch
LEK Local Electric Key Switch
M Motor
MKH Mechanical Key Hold Back
MLH Maintained Latch Hold Back
MRA Material Return Authorization
MRS Magnetic Reed Switch
NA Not Applicable
NC No Charge
NL No Latch
P Plate
POR Price on Request
SD Dead Lock Indication
SK Safety Knob
T6 Six Tumbler Paracentric Lock
FOLGER ADAM GLOSSARY
GLOSSARY
ABBREVIATIONS
STANDARD FINISHES
G90 Galvanized Produced to ASTM A653
USP Prime Painted
US26D Satin Chrome Plated
US32D Satin Stainless Steel
Zinc Plated* Produced to ASTM B633
*The American Galvanizers Association recommends that, due to extremely thin zinc on the sheet, painting or other top coating improves the service life.
G2 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Cylinder Extender: A device added to a cylinder to provide additional length.
Dead Lock Indication: Directional arrow indicates if lockboltis extended or retracted.
Fail Safe: Upon loss of power, all electric lockswill open.
Fail Secure: Upon loss of power, all electric lockswill remain locked.
Fish Tail: Another term for a bottom doorguide used on a sliding door.
Grating: A term used to describe a bar typepartition, door and grill.
Hollow Metal: A term used to describe doors andframes which are made of a lightergauge of material, usually 12 gaugeor less.
J-Hook: Another term for a closure plate usedon sliding door systems.
Jamb: A term used to describe the verticalmembers of a door frame.
Mortise: An opening made to receive a lockor other hardware.
Mylar®: Mylar® is a registered trademark ofthe DuPont Chemical Company.
Narrow Jamb Lock: A lock mounted in a two inch hollowmetal frame.
Plate: A term for heavier gauge materialsused to form doors and frames.
Plug Connector: A plastic female and male plugmechanism attached to the end ofthe wiring used in electric locks orother electric mechanisms for quickand easy disconnect.
Q-LON2®: Q-LON2® is a registered trademark of the Schlegel® Corporation.
Safety Knob: A cone shaped knob.
Sliding Door: A door which is hung on rollers andmoves horizontally to open or close.
Swinging Door: A door which is hung on hinges orpivots.
Teflon®: Teflon® is a registered trademark ofthe DuPont Chemical Company.
UL®: UL® is a registered trademark ofUnderwriters Laboratory.
FOLGER ADAM GLOSSARY
GLOSSARY
GENERAL
FA Rev. 02-10 G3
For more information, please call 210.533.1231.
Cremone Bolt:A bolt designed to give locking at the head, foot and in thecenter of the door, providing a three point locking system forspecialty-type doors in high security applications.
Extended Bolt:Used for hollow metal or stop side mounting.
Head and Foot Bolt:Bolts which are mortises at the top of the door and the bottomof the door, locking into the frame head and to the floor.These bolts can only be used on pairs of doors and Dutchdoors.
FOLGER ADAM GLOSSARY
GLOSSARY
BOLTS
ELECTRONICS
HINGES
AMP (Ampere):Units of measurement of the rate of flow of electrical current.
Backplane:Printed circuit board.
BUS:A conductor to which two or more circuits can be connected.
Continuous Duty:Device is designed to operate 100% of the time.
Interlock:A door control scenario that prohibits electrical operation of selected doors if a door in the defined group is open orunsecure.
LED:Light emitting diode.
Maintained Switch:A switch that stays in the contact position when actuated andreleased.
Momentary Switch:A switch which makes contact only while being actuated andheld.
Electric:A transfer hinge. This hinge transfers power from the jamb toan electric device that is normally mounted in or on the door.
Food Pass:A hinge which has a 90 degree stop applied to be used withfood pass doors.
Full Mortise:Hinge leaves which are normally mortised flush–one into thedoor, and one into the frame.
Full Surface:Hinge leaves which are both surface mounted on the door andthe frame.
Full Surface/Gap:A hinge designed to be used with bar grating doors and partitions.
Half Surface:A hinge that has one leaf mortised into the frame and one leafsurface mounted on the door.
G4 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 � Ph: 210.533.1231 � Fx: 210.533.2211Web: www.SouthernFolger.com � Email: [email protected]
Mogul Cylinder:A pin tumbler cylinder that is approximately 2 inches in diameter. Designed to operate certain types of detention locks.
Mogul Key:Designed to activate the pin tumblers of a mogul cylinder.
Paracentric Cylinder:A cylinder designed to accept a bit key and operate with wafertumblers. Also referred to as a nose.
Paracentric Key:A large bit type key that is normally used with maximum secu-rity detention locks using wafer tumblers to activate the lockmechanism.
Pin Tumblers:Small cylindrically shaped pins used in the mogul cylinder to create the different key codes.
Steel Engaging Ball:A small ball that is placed in the mogul cylinder, against whichthe key rides allowing the movement necessary to operate thecylinder.
Wafer Lever Tumbler:Thin brass plates that are spring activated, functioning with theparacentric key and the paracentric cylinder to allow the lock tobe unlocked or locked.
FOLGER ADAM GLOSSARY
GLOSSARY
KEYS AND CYLINDERS
LOCKS
Deadlock:A square bolt lock which is always either in the locked or theunlocked position.
Deadlock Actuator:A mechanical means of tripping a deadlock cam on snaplocks.
Electro Mechanical:Locks that are operated both manually and electrically.
Hook Bolt:A bolt that is made into the shape of a hook that is normallyused on locks for sliding doors.
Mechanical:Locks that are only operated manually.
Mortise:A lock which is installed into the edge of the door with the trimand cylinder being mounted into the lock through the face ofthe door.
Pneumatic:A lock which is operated both manually and by compressed air.
Snaplatch:A beveled bolt lock which latches upon closing the door.
FA Rev. 02-10 G5
For more information, please call 210.533.1231.
Keeper:A flat plate normally mortised into the jamb and used withsquare bolt deadlocks.
Keeper/Strike Switch:A small switch mounted behind the keeper or strike, that givesmonitoring indication when the bolts are projected into thestrike or keeper.
Strikes:Normally flat plates or cast items that are used with snap boltlocks. Some strikes have lips, whereas keepers do not.
FOLGER ADAM GLOSSARY
GLOSSARY
STRIKES/KEEPERS
SWITCHES
PLATES/MOUNTINGS
Cover Plate:A plate used to cover the lock mounting pocket built into thejamb by the frame manufacturer.
“G” Mounting:A box used to mount mechanical locks on bar grating.
HM Mounting Plate:A plate used to mount mechanical locks in hollow metal doors.
“P” Mounting:An encasement used to mount paracentric keyed mechanicallocks on plate doors.
Key Switches:Key operated switches normally used to activate the electricalor pneumatic functions of detention locks.
Push Button:A contact switch which can be used to create a signal or acti-vate the electrical or pneumatic functions of detention locks.
BLANK PAGE