FOLDING DOOR: ASSEMBLY INSTRUCTION€¦ · 3 1 Mounting plate set for folding-/hinge door S1200...
Transcript of FOLDING DOOR: ASSEMBLY INSTRUCTION€¦ · 3 1 Mounting plate set for folding-/hinge door S1200...
Version 1.0 (2016-11-30)
3.03
.1.bc
Subject to technical changes.
easy medium difficult
Assembly
FOLDING DOOR: ASSEMBLY INSTRUCTION
SERIES 1200
2
02
VERSION INFORMATION:Version 1.0:
10
08
06
07
05
03
CONTENT AND TOOLS
CONTENT:
TOOLS:(without claim of completeness)
Content and tools page
Product information page
Accessories page
Exploded drawing page
Cutting dimensions page
Detail drawings page
Assembly instruction page
The working steps described in this instruction are exclusively valid for the folding door »DIN left«. The assembly for the folding door »DIN right« is to be carried out mirror-inverted – with special attention to page 9.
n (Percussion) drilling machine n Steel drill setn Cordless screwdriver n Aluminium saw n Allen key set n Water level
n Rubber mallet n Straight edge
3
SYMBOLE: Symbol Symbol
System Information: System 42 Serie1200SYSTEM:
=
=
=
30 kg 700 mm / 2750 mm 350 mm / 750 mm
Preparation n This manual is part of the product and describes the safe and proper installation of the system. Please read the instructions carefully before installation n Pleasenotethattheassemblyshouldonlybedonebyqualifiedandtrainedstaffin strict compliance with all details indicated in this document. Improper installation in variationfrommanufacturer’sspecificationmaycausedefectsanddanger,thus endangeringthesafefixingoftheproductaswellasthesafetyoftheprospective user.Theliabilityofthemanufacturershallbeexcludedincaseofdefects andconsequentialdamagesresultingfromincorrectassemblyofthisproduct. n Please check the completeness of the delivered parts and check carefully if any transportdamagesarevisible. n Ifanypartsaredamagedorlost,pleaseimmediatelycontacttheresponsiblesupplier. n Itisassumedthatyouhaveexactlyidentifiedallcuttingdimensionsaccordingto the measurement instruction for raumplus products.
PRODUCT INFORMATION
GENERAL INFORMATION:
Importance Importance
Duringtheinstallationdonotuseastrikingtool
Noleveragetoolfordisassemblyoffittings
Be aware of the risk of entrapment.
Riskordanger!
Advice and information
Additional information / other documents
Directional data / direction of movement
n max.weightofelement n min./max.doorheight n min./max.doorwidth
„yes“and„right“
„no“and„wrong“
Follow the order
4
PRODUCT INFORMATION
GENERAL INFORMATION:
USE:
Product safety n The System complies with the prior of the art and the authorized safety rules at the time of delivery. Intended use n The prerequisite for the intended use of our products is the professional installation accordingtoourinstallationinstruction.Sufficientfittingsmustbeavailableand durably installed to all relevant places. Thefunctionofthefittingsmustnotbehinderedoralteredduringinstallation. n Special solutions are only possible in consultation with raumplus. Incorrect use n Risk or danger may occur in the following cases: - the door system has improperly been installed or maintained - the safety and installation instructions have not been followed. - afterimproperinstallationorinadequatefixing(e.g.topartsofbuildings) - the maximum weight of the doors has been exceeded. - impropershockandcaseloadsorotheradditionalloadsonthefittingshaveoccured - thefittingshavebeenusedoutside. - body parts or objects got into the closing edges or door runnings during use of the door wing. - the door system is not used as intended. Structural modifications n Structuralmodificationsthatarenotofferedasanaccessoryfromraumplus may only be attached or installed with permission of raumplus GmbH!
5
30.14.020
10.07.212 10.07.213 10.07.214
9_ 30.14.018
8_ 10.07.012 7_ 10.02.4606_ 10.02.4305_ 10.02.410
4_ 10.02.4503_10.02.4202_ 12.01.0xx1_ 12.46.0xx
ACCESSORIES
1_ Rail folding-/hinge door S1200
2_ Stile S1200
3_ Pick up element set for folding-/hinge door S1200
4_Mounting plate set for folding-/hinge door S1200
5_ Top roller incl. pick upelement, folding door S120
6_ Folding door hinge set S1200
7_ Frame connector for folding-/hinge door S1200
8_ Frame screws 6,3 x 32mm stainless steel white head black oxidized silver mat
9_ Drilling template for S1200
without illustration:
10_ Countersink set w. guiding pin S1200
11_ Panel
6
A
C
D
E
F
2
1
4
3
65
1
B
9
10
A
B
C
D
E
F
7
8
1_ Complete folding door DIN Left
EXPLODED DRAWING DIN LEFT
Item listObject Quantity Item Item no.
1 1 Folding door hinge set S1200 10.02.4302 1 Pick up element set for folding-/hinge door S1200 10.02.4203 1 Mounting plate set for folding-/hinge door S1200 10.02.4504 1 Frame connector for folding-/hinge door S1200 10.02.4605 1 Top roller incl. pick upelement, folding door S1200 10.02.4106 1 Top positioning for folding-/hinge door S1200 10.02.4707 1 Cuboid handle for hinge and folding doors 10.01.93x8 4 Stile S1200 12.01.0xx9 16 Frame screws 6,3 x 32mm 10.07.0xx
10 4 Rail folding-/hinge door S1200 12.46.0xx
7
7
24,8
10
6,5
7
30.14.018
DETAIL DRAWING
2_
PREPARING STILES / CUTTING DIMENSIONS
4 x Stile 4 x rail1 x
folding door track2 x
dividing rail 28mm
Stile
leng
th =
ele
men
t he
ight
- 8
mm
Rail
leng
th =
ele
men
t w
idth
- 2
4 m
m
Fold
ing
door
tra
ck le
ngth
= o
peni
ng w
idth
(LB
)
Div
idin
g ra
il le
ngth
= [
open
ing
wid
th (
LB)
-50
] /
2
Cutting dimensions:
Element width = (LB -20 mm) / 2 (round down if difference is with decimal places)
Element height = LH -57 mm
Rail length = EB - 24 mm
Stile length = EH - 8 mm
Panel width = EB - 11 mm (wood / glass)
Panel height = EH - 10 mm (wood) or. - 12 mm (glass)
Legend:
LB = opening width
LH = opening height
EB = element width
EH = element height
Use the drilling template S1200
8
V W U
Z X
Y
VW U
Z XY
8 4 8
1146
31
84 8
DETAIL DRAWING
3_
DIN LEFT
LB = opening width
Swing wing
element width = (LB - 20) / 2
EH =
ele
men
t he
ight
LH =
ope
ning
hei
ght
element width = (LB - 20) / 2
Slide wing
round down if necessary to avoid decimal places!
9
250 mm 250 mm
DETAIL DRAWINGHINGE DIN LEFT / DIN RIGHT
4_
DIN LEFTtop hinge
DIN LEFTbottom hinge
DIN RIGHTtop hinge
DIN RIGHTbottom hinge
The folding door reduces clear passageto approx 250 mm (measured from wall to outer edge of folding door).Distance to Interior system 100 mm, from the top track to outer edge of Interior system.
pay attention to pin sleeve
pay attention to pin sleeve
pay attention to pin sleeve
pay attention to pin sleeve
10
3,5
3,5
3,5
3,5
W
W
X
X
Y
Y
Z Z
W
WX
X
Y
Y
Z Z
3,5
3,5
3,5
3,5
10 Nm
10 Nm
10 Nm
10 Nm
10 Nm
10 Nm
10 Nm
10 Nm
2_ Slide wing (DIN LEFT), do not use a hammer!
1_ Swing wing (DIN LEFT), do not use a hammer!
ASSEMBLY INSTRUCTIONDIN LEFT – SLIDE WING AND SWING WING
Swing wing
hinge pivot facing backwards
hinge pivot facing backwards
Slide wing
11raumplus GmbH · Dortmunder Straße 35 · 28199 Bremen · Germany · Tel: +49 (0) 421 / 579 50 0 · Fax: +49 (0) 421 / 579 50 11 · www.raumplus.com
DIN LEFT
ASSEMBLY INSTRUCTION
3_Swingwingandslidewing(fi.back DIN LEFT )
Pay attention to orientation and position of pin sleeve!
Pin sleeve
Pin sleeve
Pin sleeve
Swing wingSlide wing
5mm