Folding Chair Lydia
-
Upload
dejan-trujkic -
Category
Documents
-
view
221 -
download
0
Transcript of Folding Chair Lydia
-
8/13/2019 Folding Chair Lydia
1/16
Project: Folding Chair Lydia Page 1 of 16
Folding Chair Lydia
Carefully make the items by following the measurements given on particular pictures. You canuse various types of wood for this project manufacture. We recommend purchasing some wood
with a nice, interesting texture like ash, beech, cedar, birch, maple, oak, etc. If you are planning to
paint this chair, the texture of wood is not important.
The measurements are given in millimeters, while the measurements given in inches are in
brakes
(1 inch = 25, 4 mm).
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
2/16
Parts List
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
3/16
Assembly Drawing
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
4/16
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
5/16
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
6/16
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
7/16
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
8/16
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
9/16
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
10/16
P
Standard Parts
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
11/16
Project: Folding Chair Lydia Page 11 of 16
Assemblage Instructions
1. Set the Back Crossbars (parts 2) and Wide Back Crossbars (part 4) on the Legs (parts 1) by followinginstructions in 2D documentation, then mark the locations of pilot holes and drill them.
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
12/16
Project: Folding Chair Lydia Page 12 of 16
2. Fasten the Back Crossbars (parts 2) and Wide Back Crossbars (part 4) on the Legs (parts 1) using theWood Screws D4x40mm (parts 5).
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
13/16
Project: Folding Chair Lydia Page 13 of 16
3. Fasten the remaining Back Crossbar (part 2) to the subassembly made in the previos step with thesame procedure.
4. Set the Seat Crossbars (parts 3) by following the 2D documentation on remaining Legs (parts 1),mark the locations for the pilot holes and drill them. Fasten the Seat Crossbars (parts 3) to the Legs
(parts 1) by using the Wood Screws D4x40mm (parts 5).
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
14/16
Project: Folding Chair Lydia Page 14 of 16
5. Fasten the remaining Seat Crossbar (part 3) to the subassembly made in the previous step with thesame procedure.
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
15/16
Project: Folding Chair Lydia Page 15 of 16
6. Set the subassemblies from the step 3 and 5 into their final position. Do not forget, to put the BigWahers D10 (part 6) between them.
Put the Cylinders (parts 7) into the holes.
Project from WWW.CRAFTSMANSPACE.COM
http://www.craftsmanspace.com/ -
8/13/2019 Folding Chair Lydia
16/16
Project: Folding Chair Lydia Page 16 of 16
7. Fasten the assemblies together by using: Big Washer D8mm (item 8), Lock Washer D8mm (item 9),Hexagon Nut M8 (item 10) and the Bolts (item 11).