FOAM-CONTROL EPS EXPANDED POLYSTYRENE · 2020. 12. 12. · Foam-Control EPS products can be...
Transcript of FOAM-CONTROL EPS EXPANDED POLYSTYRENE · 2020. 12. 12. · Foam-Control EPS products can be...
-
CONTROL, NOT COMPROMISE.
CONTROL YOUR:
• MATERIALS
• R-VALUES
• PROCESS
• COSTS
• TIMELINE
• LIABILITY
DON’TCOMPROMISE YOUR:
• DESIGN
• ENERGY EFFICIENCY
• STRUCTURAL INTEGRITY
• PROFITABILITY
• QUALITY
• REPUTATION
CONTROL, NOT COMPROMISE.
FOAM-CONTROL EPS
EXPANDED POLYSTYRENE
TM
Foam-Control EPS products are manufactured by AFM Corporation licensees.
Copyright ©2008 AFM Corporation. All rights reserved. Printed in USA. R-Control, Foam-Control, and Perform Guard are registered trademarks of AFM Corporation, Burnsville, MN.
ICC ES is a registered trademark of ICC Evaluation Service, Inc.
UL is a registered trademark of Underwriters Laboratories, Inc.
USGBC logo is a registered trademark ofU.S. Green Building Council.
FC01-06/08
-
CONTROL YOUR COSTS. CONTROL YOUR DENSITY. CONTROL YOUR SHAPE. CONTROL YOUR SIZE. CONTROL YOUR THICKNESS. CONTROL YOUR SQUARENESS. CONTROL YOUR MATERIALS. CONTROL YOUR R-VALUE. CONTROL YOUR LIABILITY. CONTROL YOUR SQUA
Concrete Insulation/Void FillGeofoam
DON’T COMPROMISE YOUR QUALITY. DON’T COMPROMISE YOUR ENERGY EFFICIENCY. DON’T COMPROMISE YOUR STRUCTURAL INTEGRITY. DON’T COMPROMISE YOUR PROFITABILITY. DON’T COMPROMISE YOUR DESIGN. DON’T COMPROMISE YOUR REPUTATION. DO
Wall Specifi cation Under-slab InsulationPerimeter InsulationRoof Insulation Wall Sheathing Insulating Concrete Forms SIPs
Foam face-off:Choosing EPS expanded polystyrene over XPS extruded polystyrene.
• Can easily vary the thickness and
density of EPS for different uses
• EPS is less-expensive
than XPS foam
• EPS is more easily molded into
different shapes
• EPS allows for more design possibilities
• EPS with Perform Guard®
protects against termites
Materials. Labor. Costs. Foam-Control® EPSmeans control, not compromise.
Foam-Control EPS building products are engineered to give
you the greatest possible control for your project applica-
tion: from design and timelines, to materials and costs,
and—ultimately—control over your results. The advantages
to using Foam-Control EPS products include:
• State-of-the-art insulation and energy effi ciency
• Variety of density, thickness, size
• UL QA monitored, tested, certifi ed, listed
• Unlimited fabrication possibilities
• Building code recognized
• Warranted R-value
• Perform Guard® termite protection available
• Cost effective
• Long-lasting, strong, and stable
• Contains no CFC, HCFC, HFC, or formaldehyde
• Recyclable
Foam-Control EPS is a lightweight yet strong material that
gives architects, designers and builders the freedom and
confi dence to turn their visions into reality.
This looks like a job for expanded polystyrene.
In the construction industry, Foam-Control EPS is among
the most versatile, energy effi cient, and cost effective
insulators available, delivering extremely high, stable
R-values. Depend on Foam-Control EPS to do the job—
practically any job—from the ground up: perimeter founda-
tion and underslab insulation, wall sheathing, EIFS insula-
tion, roof insulation, concrete insulation/void fi ller,
ICF insulation, Geofoam and just about any construction
application you can imagine.
Stands up to the elements, yet it’s good for the environment.
Cost effective thermal design is among the highest priori-
ties in construction. Foam-Control EPS insulation products
are available in a range of densities necessary to provide
energy effi ciency, structural integrity, and cost effective-
ness. They’re proven to lower energy costs, saving both
money and precious resources.
Foam-Control EPS, when used as a component in an
engineered building system, helps to resist some of the
toughest conditions nature can deliver, like rain, snow,
wind, dust, heat and cold.
Foam-Control EPS with Perform Guard.
One of the most destructive forces anywhere is termites.
Foam-Control EPS products can be manufactured with
Perform Guard, a proven and safe additive. that effectively
resists termites.*
Proven to meet, or exceed, building codes.
Foam-Control EPS is manufactured to Quality Control
Program standards monitored by Underwriters Laborato-
ries, Inc. and recognized by national building codes. Foam-
Control EPS manufacturers offer product warranties that
ensure termite resistance, physical properties, and thermal
performance. Foam-Control EPS can
stand up to all industry tests—and has.
No other EPS can say that.
It’s more than a foam. It’s a family.
When you choose Foam-Control EPS, you’re not sending
your order off to some mysterious factory. You’re collabo-
rating with a team of experts who work with you every step
of the way. We’re here to answer your questions, solve your
problems, and do everything we can to make sure your
project proceeds smoothly—and ends successfully.
Foam-Control EPS products are manufactured by AFM
Corporation’s network of licensed manufacturers throughout
North America and the world. AFM licensed facilities
adhere to strict, consistent standards to ensure uniformly
high-quality EPS products.
This network allows us to offer architects, designers and
builders the best of both worlds: the resources of the
country’s largest provider of EPS insulation products and
systems, and the superior attention and customer service
of a local supplier.
Ready to take control? Start here.
If you’re starting to wonder how Foam-Control EPS can
contribute to your next project, here’s how to fi nd out:
Just contact your nearest Foam-Control EPS manufacturer.
They’ll be happy to give you a design consultation, infor-
mation about Foam-Control EPS products, pricing, and
the answers to all your questions. Contact a sales rep, and
download Foam-Control EPS documentation, through our
web site at www.foam-control.com.
With Foam-Control EPS, you’re the master of your materials.
FROM FROST LINE TO ROOF LINE, YOU’REIN CONTROL WITH FOAM-CONTROL EPS.
CONTROL, NOT COMPROMISE.
* Perform Guard is not a barrier, but should be used in conjunction with a total Pest Management Program available from a reputable Pest Control Operator.
-
CONTROL YOUR COSTS. CONTROL YOUR DENSITY. CONTROL YOUR SHAPE. CONTROL YOUR SIZE. CONTROL YOUR THICKNESS. CONTROL YOUR SQUARENESS. CONTROL YOUR MATERIALS. CONTROL YOUR R-VALUE. CONTROL YOUR LIABILITY. CONTROL YOUR SQUA
Concrete Insulation/Void FillGeofoam
DON’T COMPROMISE YOUR QUALITY. DON’T COMPROMISE YOUR ENERGY EFFICIENCY. DON’T COMPROMISE YOUR STRUCTURAL INTEGRITY. DON’T COMPROMISE YOUR PROFITABILITY. DON’T COMPROMISE YOUR DESIGN. DON’T COMPROMISE YOUR REPUTATION. DO
Wall Specifi cation Under-slab InsulationPerimeter InsulationRoof Insulation Wall Sheathing Insulating Concrete Forms SIPs
Foam face-off:Choosing EPS expanded polystyrene over XPS extruded polystyrene.
• Can easily vary the thickness and
density of EPS for different uses
• EPS is less-expensive
than XPS foam
• EPS is more easily molded into
different shapes
• EPS allows for more design possibilities
• EPS with Perform Guard®
protects against termites
Materials. Labor. Costs. Foam-Control® EPSmeans control, not compromise.
Foam-Control EPS building products are engineered to give
you the greatest possible control for your project applica-
tion: from design and timelines, to materials and costs,
and—ultimately—control over your results. The advantages
to using Foam-Control EPS products include:
• State-of-the-art insulation and energy effi ciency
• Variety of density, thickness, size
• UL QA monitored, tested, certifi ed, listed
• Unlimited fabrication possibilities
• Building code recognized
• Warranted R-value
• Perform Guard® termite protection available
• Cost effective
• Long-lasting, strong, and stable
• Contains no CFC, HCFC, HFC, or formaldehyde
• Recyclable
Foam-Control EPS is a lightweight yet strong material that
gives architects, designers and builders the freedom and
confi dence to turn their visions into reality.
This looks like a job for expanded polystyrene.
In the construction industry, Foam-Control EPS is among
the most versatile, energy effi cient, and cost effective
insulators available, delivering extremely high, stable
R-values. Depend on Foam-Control EPS to do the job—
practically any job—from the ground up: perimeter founda-
tion and underslab insulation, wall sheathing, EIFS insula-
tion, roof insulation, concrete insulation/void fi ller,
ICF insulation, Geofoam and just about any construction
application you can imagine.
Stands up to the elements, yet it’s good for the environment.
Cost effective thermal design is among the highest priori-
ties in construction. Foam-Control EPS insulation products
are available in a range of densities necessary to provide
energy effi ciency, structural integrity, and cost effective-
ness. They’re proven to lower energy costs, saving both
money and precious resources.
Foam-Control EPS, when used as a component in an
engineered building system, helps to resist some of the
toughest conditions nature can deliver, like rain, snow,
wind, dust, heat and cold.
Foam-Control EPS with Perform Guard.
One of the most destructive forces anywhere is termites.
Foam-Control EPS products can be manufactured with
Perform Guard, a proven and safe additive. that effectively
resists termites.*
Proven to meet, or exceed, building codes.
Foam-Control EPS is manufactured to Quality Control
Program standards monitored by Underwriters Laborato-
ries, Inc. and recognized by national building codes. Foam-
Control EPS manufacturers offer product warranties that
ensure termite resistance, physical properties, and thermal
performance. Foam-Control EPS can
stand up to all industry tests—and has.
No other EPS can say that.
It’s more than a foam. It’s a family.
When you choose Foam-Control EPS, you’re not sending
your order off to some mysterious factory. You’re collabo-
rating with a team of experts who work with you every step
of the way. We’re here to answer your questions, solve your
problems, and do everything we can to make sure your
project proceeds smoothly—and ends successfully.
Foam-Control EPS products are manufactured by AFM
Corporation’s network of licensed manufacturers throughout
North America and the world. AFM licensed facilities
adhere to strict, consistent standards to ensure uniformly
high-quality EPS products.
This network allows us to offer architects, designers and
builders the best of both worlds: the resources of the
country’s largest provider of EPS insulation products and
systems, and the superior attention and customer service
of a local supplier.
Ready to take control? Start here.
If you’re starting to wonder how Foam-Control EPS can
contribute to your next project, here’s how to fi nd out:
Just contact your nearest Foam-Control EPS manufacturer.
They’ll be happy to give you a design consultation, infor-
mation about Foam-Control EPS products, pricing, and
the answers to all your questions. Contact a sales rep, and
download Foam-Control EPS documentation, through our
web site at www.foam-control.com.
With Foam-Control EPS, you’re the master of your materials.
FROM FROST LINE TO ROOF LINE, YOU’REIN CONTROL WITH FOAM-CONTROL EPS.
CONTROL, NOT COMPROMISE.
* Perform Guard is not a barrier, but should be used in conjunction with a total Pest Management Program available from a reputable Pest Control Operator.
-
CONTROL, NOT COMPROMISE.
CONTROL YOUR:
• MATERIALS
• R-VALUES
• PROCESS
• COSTS
• TIMELINE
• LIABILITY
DON’TCOMPROMISE YOUR:
• DESIGN
• ENERGY EFFICIENCY
• STRUCTURAL INTEGRITY
• PROFITABILITY
• QUALITY
• REPUTATION
CONTROL, NOT COMPROMISE.
FOAM-CONTROL EPS
EXPANDED POLYSTYRENE
TM
Foam-Control EPS products are manufactured by AFM Corporation licensees.
Copyright ©2008 AFM Corporation. All rights reserved. Printed in USA. R-Control, Foam-Control, and Perform Guard are registered trademarks of AFM Corporation, Burnsville, MN.
ICC ES is a registered trademark of ICC Evaluation Service, Inc.
UL is a registered trademark of Underwriters Laboratories, Inc.
USGBC logo is a registered trademark ofU.S. Green Building Council.
FC01-06/08