7/30/2019 foam concrete brick

1/2

_____________________________________________________________________________________

Nanolite Blocks:

Nanolite Cellular Lightweight Concrete Bricks are produced by adding millions of Micro-Sized

air bubbles into a cement based mixture. The addition of millions of air bubbles is achieved by

using a Proprietary Foam Generator to produce highly stable and injecting the Foam directly intoa concrete mixer containing a sand/ cement/ fly ash/ water slurry.

The amount of cement, sand (if included), water. Fly-Ash and foam included in the Light weight

Cellular concrete mix design depends on the required properties (i.e. strength, thermal

conductivity or durability).Also, depending on the required CLC density and variance, anappropriate mixer is selected.

The hardened material consists of small-enclosed air bubbles thereby resulting in a light weightstable cellular material with densities ranging from as low 300kg/m3 to 1800Kg/m3. The

Hardened Material Consists Of Small-Enclosed Air Bubbles Thereby Resulting In A

Lightweight Stable Cellular Material With Densities Ranging From As Low 300kg/M3 To 1800Kg/M3.

Good Curing gives strength and dimensional stability to Bricks. Bricks are cured either by air

curing or high-pressure steam curing procedure. Because of great-Engineered properties,

NANOLITE Bricks have become popular in wide range of applications in construction sector.

Advantages of Nanolite Bricks

High Thermal Insulation

Low thermal conductivity.

Thermal Performances 5 times better than clay bricks

& 10 times better than RCC

Interiors remain cool in summer and warm in cold wintry days.

Savings in recurring energy costs in air-conditioning.

Ideal material for applications in cold storage rooms.

Good Sound Insulation

Up to 37-42db sound reduction based on thickness.

It is possible to achieve even higher values depending uponthe thickness and the plaster.

Savings in recurring energy costs in air-conditioning.

Can fulfill required STC (Sound Transmission Class) rating.

Reduction of Dead Load

1/3rd the density of clay bricks.

_____________________________________________________________________________________

Plot No 82, Raghuveer Nagar, Rampally Road, IDA Cherlapally, Hyderabad - 51. Ph: +91 (40) 42627799

7/30/2019 foam concrete brick

2/2

_____________________________________________________________________________________

Economic design: savings in cement and steel.

Enables faster construction. Suitable for low-soil bearing capacity & seismic zones.

Facilitates construction of unplanned walls any where anytime

Fire Protection

Nanolite Bricks offer great fire protection. With a just 100mm

thickness of wall 1000 kg/m3, Nanolite block offers fire endurance forheat transmission for 4 hours without releasing any toxic fumes during.

Enhances Carpet Area

An engineered block, it can be offered in any thickness as per the

construction design.

By using 150 mm thick Bricks in place of 9 inch brick, the customergets an additional 2% to 3% carpet area. The savings on account of

additional carpet area gained is more than the cost of Bricks

Other Advantages of Nanolite:

Nanolite offers economical POP or putty finish in internal partition walls.

Accurate size and shapes help in reducing plastering costs.

Better finishing of walls offers good amount of reduction in paints.

Eco-friendly.

Speedier Constructions.

Ease of Workability.

Universal Acceptability.

_____________________________________________________________________________________

Plot No 82, Raghuveer Nagar, Rampally Road, IDA Cherlapally, Hyderabad - 51. Ph: +91 (40) 42627799