FNW_Fig.1211_12BGV05
-
Upload
irudhayarajanthonysamy -
Category
Documents
-
view
214 -
download
0
description
Transcript of FNW_Fig.1211_12BGV05
Figure 1211 & 1212BRONZE GATE VALVES
NON-RISING STEM 125#FEDERAL SPECIFICATION
www.fnw.com
Features: • 200 WOG • 125 PSI Saturated Steam
(1211 Only) • Non-Rising Stem • Solid Wedge Disc • Back Seat Design • NPT Ends
○ Fig. 1211 - Sizes 1/4” to 3” • Solder Ends
○ Fig. 1212 - Sizes 1/2” to 3” • Conforms to MSS SP-80 • Body Markings Comply with
MSS SP-25 • NPT Ends Comply with
ANSI/ASME B1.20.1 • Solder Ends Comply with
ANSI B16.18Note: Before installing solder end valves, be sure the solder or brazing alloy melting point is sufficient to withstand the line pressure and temperature and is compatible with the media through the valve.
Weights (lbs.)Size 1211 12121/4 0.503/8 0.501/2 0.63 0.553/4 0.92 0.881 1.49 1.43
1-1/4 2.13 1.911-1/2 2.76 2.48
2 4.41 4.232-1/2 7.72 6.89
3 11.02 10.47
Fig. 1211 Fig. 1212
Figure Number MatrixFNW 1 2 1 1 Size
1/4 = B 3/8 = C 1/2 = D 3/4 = F 1 = G
1-1/4 = H 1-1/2 = J 2 = K 2-1/2 = L 3 = M
END TYPE 1 = NPT Ends 2 = Solder Ends
SIZE CODE
Figure 1211 & 1212BRONZE GATE VALVES
NON-RISING STEM 125#FEDERAL SPECIFICATION
DOC: FNW1211-121205 Ver. 3/2012© 2012 - FNW. All rights reserved.The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. Always verify that you have the most recent product specifications or other documentation prior to the installation of these products.
Dimensions (inches)Size Model 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
A 1211 2.13 2.13 2.13 2.13 2.40 3.03 3.07 3.27 4.13 5.201212 2.13 2.40 3.03 3.03 3.27 4.13 4.41 5.20
B
1211 2.95 2.95 3.03 3.58 4.21 4.69 5.47 6.69 7.87 9.011212 3.03 3.58 4.21 4.69 5.47 6.69 7.87 9.01
C 1211 1.65 1.65 1.97 2.01 2.36 2.68 2.84 3.27 4.02 4.571212 1.89 2.36 2.80 3.15 3.47 4.09 4.72 5.35
ØD 1211 0.39 0.39 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.001212 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00
E
1211 0.31 0.31 0.31 0.35 0.39 0.43 0.48 0.53 0.59 0.671212 0.31 0.35 0.39 0.43 0.48 0.53 0.59 0.67
F 1211 0.43 0.43 0.54 0.57 .70 0.75 0.75 0.91 1.14 1.201212 0.52 0.75 0.91 0.97 1.09 1.34 1.47 1.66
G 1212 0.63 0.88 1.13 1.38 1.63 2.13 2.63 3.13
Standard MaterialsRef. No. Description Material
1 Body BRONZE ASTM B62 C-836002 Disc BRONZE ASTM B62 C-836003 Stem BRONZE ASTM B62 C-83600 4 Bonnet BRONZE ASTM B62 C-83600 5 Packing NEOPRENE LK 35ANF6 Packing Gland BRASS ASTM B16-C36000
7 Packing NutBRASS ASTM B16-C36000 (1/4” - 1”)
B62 C-83600 (1-1/4” - 3”)8 I.D. Plate ALUMINUM
9 Handwheel POWDER COATEDALUMINUM ASTM B85
10 Handwheel Nut STEEL11 Lock Nut BRASS ASTM B16-C36000
Fig. 1211
Fig. 1212