Plastic Laminate Casework, Custom Millwork and Furniture From Longo
FM04 plastic custom level float switch...FM04 – Plastic Custom Multi Level Liquid Sensor These...
Transcript of FM04 plastic custom level float switch...FM04 – Plastic Custom Multi Level Liquid Sensor These...
nqa.ISO9001Registered
nqa.ISO13485Registered
FM04 – Plastic Custom Multi Level Liquid Sensor
These 1” Polypro �oat switches are perfect for years of corrosive resistant service in waters and many other chemicals. Con�gurable for 1 to 5 levels, these switches may be used to control pumps, alarms or indicate general �uid levels.
FM04
FM04-XXXX - 1” Diameter Polypropylene Float Switch, M10 – 1.0 Bulkhead Thread, 10 mm diameter Stem
Standard Features: 50 Watt Resistive SPST Switches, 1 1/2” min. required between levels , Up to 5 levels, 15” long
Regulate liquid levels, detect �uid leaks, and more with the FM04 series of plastic multilevel �oat switches. Fully customizable to work across a near endless variety of applications, our polypropylene level switches are unmatched
reliability and longevity.
105° C
Part Number Switch Type Max SwitchingCurrent
Max SwitchingVoltage Max Temp Max Pressure Speci�c Gravity
50 Watt 0.5 Amps 250 VDCFM04-XXXX 50 psig 0.80
This Multi-Point Level Detector can be top or bottom-mounted with a single through-hole. Multi level liquid sensors can be customized to meet your exact speci�cations, including length, number of �oats, �oat position, normally open/normally closed operation, wire type, mounting options, temperature sensor integration, and more. Multi level sensing is ideal for many markets like chemical processing, food and beverage, and Clean in place (CIP) systems.
EuropeStrain Measurement Devices
Bury Road, Chedburgh, Bury St Edmunds IP29 4UQ�[email protected] | +44 (0)1284 852 000
USASMD Fluid Controls55 Barnes Park North, Wallingford, CT 06492solutions@�uidswitch.com | (203) 294-5800
www.�uidswitch.com
nqa.ISO9001Registered
nqa.ISO13485Registered
www.�uidswitch.com
FM041” Polypropylene
Choose a Part
Mounting Type
External
Pipe Plugs Bulkhead
150# Flange Adjustable Compression Fitting
1/4” npt
1/2” npt
1” npt
2” npt
1/2” - 13
3/4” - 10
1”
3” Adjustability +___________”
Standard Fittings
Other
____________________________________________________________________________________________________
Float Stops300 Series SS Grip Rings(Standard)
316 SS Collars with Set Screw
Internal
Wire Type
Wiring Con�guration
____________________
____________________22 or 24 Awg Te�on (Standard)
Lead Length _________inches24” (Standard)
Separate(Standard)
Common
NOTE: Switch Points measured from bottom of mounting surface to switch actuation at �oat center. Please check Normally Closed (NC), Normally Open (NO) or Single Pole Double Through (SPDT)
Fill in con�guration sheet and application speci�cations and return for quote or order.
L1 _______”
L2 _______”
L3 _______”
L4 _______”
L5 _______”
L0 _______”
NC NO SPDT
NC NO SPDT
NC NO SPDT
NC NO
NC NO
Length Overall+1 1/2” for FM20 | +1” for FM10Unless Speci�ed
*Required 1 1/2” min. between levels
SPDT
SPDT
L1 L2
*3-5 levels may require Common Wire
L1
L2
L3 L4
L5
L0
Fitting
nqa.ISO9001Registered
nqa.ISO13485Registered
www.�uidswitch.com
Application Speci�cation Sheet
Company:
Address:
City: State: Zip:
Name:
Telephone:Email:
Application Description:
Fluid Type: Temp: °C °F Pressure: psig
Tank or Contact Materials:
Electrical Device orOutput to be Controlled:
Voltage:
Power:
Estimated Purchase Quantity: Price Target:
or
$
Application have a Pump? If Yes: Pump Up Pump Down