Flushing Ring
-
Upload
wendel123950085779 -
Category
Documents
-
view
70 -
download
8
Transcript of Flushing Ring
Data sheet FLUSHING RING Date 01/13
Page 1 of 1
_______________________________________________________________________________________________ PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK, Tel: +44 (0) 1704 509090, Fax: +44 (0) 1704 509091, email: [email protected], Website: www.pci-instruments.com (Specifications are subject to change without notice)
FLUSHING RINGS FR
Flushing rings are used with flanged chemical seal systems for flushing or venting the space immediately in front of the diaphragm. They are simply mounted between the flanged process connection and the diaphragm seal. The two flushing ports allow washing out of particles accumulated in front of the membrane and the pressure space can be vented or drained according to requirement.
Features
Standard Options
Flushing Connections
2 x ½” NPT Female Female: ¼” NPT, ½” BSP, ½” BSP
Material 316 Stainless Steel Inconel 600, Monel 400, hastelloy C276, Nickel, Titanium
Plug Screws (For the flushing connection when not in use)
2 x ½” NPT Male
Male: ¼” NPT, ½” NPT, ½” BSP, ¼” BSP
Process Connection
DIN2526, ASME B 16.5 RF
Others on request
Note: Sealing gaskets are not part of our standard supply and should be made of material appropriate for your process medium.
HOW TO ORDER Please specify : model, process connection, flushing connection, material, options if any
Example : FR, 2”ANSI150#, 1/2”NPTF, 316