Fluidtrol Custom Fabricated FRP, PVC and CPVC Y strainersFlange Size A H L Basket Surface Area (in2)...
10
Wye Strainers Fluidtrol Process Technologies, Inc. manufactures Wye Strainers to standards that exceed industry standards. These strainers are made for critical applications where high flow rates and high loading potential exists, while low pressure drops are desired. Materials of Construction include PVC, CPVC, PP and PVDF lined FRP. This lamination construction combines the chemical resistance of the particular liner material (thermoplastic) and the structural strength of fiberglass. Wye Strainers are also offered in all-FRP construction. Resins can be used for high temperature and abrasive applications. • EPDM lid gasket is standard, but Viton and Teflon are also options. • Flanged lid with stainless bolts, nuts and washers are standard. T-Handle Design for easy lid removal is an option. • Baskets are 1/4” perforated- made from same material as the strainer (FRP Wyes have PVDF Baskets). Other perfs/materials are available. • Pipe connections are Flanges. Threaded, socket, groove latch and True Union couplings are also available. • Flanged or threaded blowdown ports are provided. • Custom dimensions and designs are readily available. WY E STRAIN NER DIMEN NSIONS PERFORM MANCE CR RITERIA Flange Size A H L Basket Surface Area (in 2 ) Ratio- Basket Surface: Pipe Flow Rate = 1 psid (Clean Basket) 2” 23 12 15.625 72.2 23 140 GPM 3” 28 18 21.375 72.2 10.2 140 GPM 4” 32 18 23 207.2 16.5 400 GPM 6” 39 20.875 28.25 384.3 13.6 790 GPM 8” 48 26 33.125 594.6 11.8 1150 GPM 10” 50 29.875 35 826.6 10.5 1600 GPM 12” 56 32.875 41.875 1130.4 10 2230 GPM 14” 60 41 45.25 1519.8 9.9 3000 GPM Fluidtrol Process Technologies, Inc. • PO Box 1418 • Pelham, AL, 35124 • 205-444-9355 (P) • 205-444-9356 (F) • www.fluidtrol.com A H L
Transcript of Fluidtrol Custom Fabricated FRP, PVC and CPVC Y strainersFlange Size A H L Basket Surface Area (in2)...
Wye StrainersFluidtrol Process Technologies, Inc. manufactures Wye Strainers to standards that exceed industry standards. These
strainers are made for critical applications where high flow rates and high loading potential exists, while low pressure drops are desired.
Materials of Construction include PVC, CPVC, PP and PVDF lined FRP. This lamination construction combines the chemical resistance of the particular liner material (thermoplastic) and the structural strength of fiberglass. Wye Strainers are also offered in all-FRP construction. Resins can be used for high temperature and abrasive applications.
• EPDM lid gasket is standard, but Viton and Teflon are also options.• Flanged lid with stainless bolts, nuts and washers are standard. T-Handle Design for easy lid removal is an option.• Baskets are 1/4” perforated- made from same material as the strainer (FRP Wyes have PVDF Baskets). Other perfs/materials are available.• Pipe connections are Flanges. Threaded, socket, groove latch and True Union couplings are also available.• Flanged or threaded blowdown ports are provided.• Custom dimensions and designs are readily available.
WYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONS PERFORMANCE CRITERIAPERFORMANCE CRITERIAPERFORMANCE CRITERIA
Flange Size A H L Basket Surface
Area (in2)Ratio- BasketSurface: Pipe
Flow Rate = 1 psid (Clean Basket)
2” 23 12 15.625 72.2 23 140 GPM3” 28 18 21.375 72.2 10.2 140 GPM4” 32 18 23 207.2 16.5 400 GPM6” 39 20.875 28.25 384.3 13.6 790 GPM8” 48 26 33.125 594.6 11.8 1150 GPM10” 50 29.875 35 826.6 10.5 1600 GPM12” 56 32.875 41.875 1130.4 10 2230 GPM14” 60 41 45.25 1519.8 9.9 3000 GPM
!
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • P O B o x 1 4 1 8 • P e l h a m , A L , 3 5 1 2 4 • 2 0 5 - 4 4 4 - 9 3 5 5 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
A
H
L
CJP
Rectangle
CJP
Quote-Call
Wye (Y) StrainersFluidtrol Process Technologies, Inc. manufactures Wye Strainers to standards that exceed industry standards. These
strainers are made for critical applications where high flow rates and high loading potential exists, while low pressure drops are desired.
Materials of Construction include PVC, CPVC, PP and PVDF lined FRP. This lamination construction combines the chemical resistance of the particular liner material (thermoplastic) and the structural strength of fiberglass. Wye Strainers are also offered in all-FRP construction. Resins can be used for high temperature and abrasive applications.
• EPDM lid gasket is standard, but Viton and Teflon are also options.• Flanged lid with stainless bolts, nuts and washers are standard. T-Handle Design for easy lid removal is an option.• Baskets are 1/4” perforated- made from same material as the strainer (FRP Wyes have PVDF Baskets). Other perfs/materials are available.• Pipe connections are Flanges. Threaded, socket, groove latch and True Union couplings are also available.• Flanged or threaded blowdown ports are provided.• Custom dimensions and designs are readily available.
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • 3460 Stanwood Blvd. • Huntsville , A L , 3 5 1811 • 2 5 6 - 8 5 9 - 1 6 0 9 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
A
H
L
WYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONS PERFORMANCE CRITERIAPERFORMANCE CRITERIAPERFORMANCE CRITERIA
Flange Size A H L Basket Surface
Area (in2)Ratio- BasketSurface: Pipe
Flow Rate = 1 psid (Clean Basket)
2” 23 12 15.625 72.2 23 140 GPM3” 28 18 21.375 72.2 10.2 140 GPM4” 32 18 23 207.2 16.5 400 GPM6” 39 20.875 28.25 384.3 13.6 790 GPM8” 48 26 33.125 594.6 11.8 1150 GPM10” 50 29.875 35 826.6 10.5 1600 GPM12” 56 32.875 41.875 1130.4 10 2230 GPM14” 60 41 45.25 1519.8 9.9 3000 GPM
CJP
Rectangle
CJP
Quote
SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC PVC/ FRP STRAINERS
1.) SCOPE
THIS SPECIFICATION COVERS REQUIREMENTS FOR SIMPLEX WYE TYPES INTENDED FOR USE IN CHEMICAL PIPING SYSTEMS WHERE MAXIMUM RESISTANCE TO CORROSION, PRESSURE AND TEMPERATURE IS REQUIRED.
2.) STRAINER DESIGN
2.1 Strainer shall be flanged Wye type.2.2 Body configuration shall be in-line with Branch at 45 degrees.2.3 Basket shall be PVC, Perforations 1/4” on 3/16” centers- or as specified.2.4 Minimum area ratio of pipe to basket shall be 10 to 1.2.5 Cover shall be PVC with 1/2” minimum flush tap- threaded or flanged.2.6 Strainer shall be rated for 75 psi at 75 deg. F2.7 Strainer design shall conform to ASME code for non-metallic pressure vessels.2.8 Vendor shall supply min 5 years service history of applications in similar service.2.9 Strainers shall be as manufactured by Fluidtrol Process Technologies, Inc.
3.)CONSTRUCTION
3.1 Strainer body shall be of dual laminate construction: Sch 80 PVC with FRP overwrap.3.2 Strainer body shall be schedule 80 min, solvent fused and backwelded prior to FRP overwrap. All joints to be spark tested.3.3 All flanges to ANSI 150 # Van Stone Type.3.4 Exterior protection is unsaturated polyester resin based high quality gel coat- 10 mils min.
4.0) STANDARDS
4.1 All products shall conform to or exceed the specifications as set forth in the following standards:
Cell Class 12454-B as in ASTM D-1784, ASTM-D-1785, ASTM-D-2467, ASTM D-2464, ANSI B 16.5 cl 150
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • 3 4 6 0 S t a n w o o d B l v d . • H u n t s v i l l e , A L , 3 5 1 8 1 1 • 2 5 6 - 8 5 9 - 1 6 0 9 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
CJP
Rectangle
Wye StrainersFluidtrol Process Technologies, Inc. manufactures Wye Strainers to standards that exceed industry standards. These
strainers are made for critical applications where high flow rates and high loading potential exists, while low pressure drops are desired.
Materials of Construction include PVC, CPVC, PP and PVDF lined FRP. This lamination construction combines the chemical resistance of the particular liner material (thermoplastic) and the structural strength of fiberglass. Wye Strainers are also offered in all-FRP construction. Resins can be used for high temperature and abrasive applications.
• EPDM lid gasket is standard, but Viton and Teflon are also options. • Flanged lid with stainless bolts, nuts and washers are standard. T-Handle Design for easy lid removal is an option.• Baskets are 1/4” perforated- made from same material as the strainer (FRP Wyes have PVDF Baskets). Other perfs/materials are available.• Pipe connections are Flanges. Threaded, socket, groove latch and True Union couplings are also available.• Flanged or threaded blowdown ports are provided.• Custom dimensions and designs are readily available.
!
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • P O B o x 1 4 1 8 • P e l h a m , A L , 3 5 1 2 4 • 2 0 5 - 4 4 4 - 9 3 5 5 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
WYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONS PERFORMANCE CRITERIAPERFORMANCE CRITERIAPERFORMANCE CRITERIA
Flange Size A H L Basket Surface
Area (in2)Ratio- BasketSurface: Pipe
Flow Rate = 1 psid (Clean Basket)
2” 23 12 15.625 72.2 23 140 GPM3” 28 18 21.375 72.2 10.2 140 GPM4” 32 18 23 207.2 16.5 400 GPM6” 39 20.875 28.25 384.3 13.6 790 GPM8” 48 26 33.125 594.6 11.8 1150 GPM10” 50 29.875 35 826.6 10.5 1600 GPM12” 56 32.875 41.875 1130.4 10 2230 GPM14” 60 41 45.25 1519.8 9.9 3000 GPM
A
H
L
CJP
Rectangle
CJP
Quote
SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC CPVC/FRP STRAINERS
1.) SCOPE
THIS SPECIFICATION COVERS REQUIREMENTS FOR SIMPLEX FRP/CPVC STRAINERS, WYE AND BASKET TYPES INTENDED FOR USE IN CHEMICAL PIPING SYSTEMS WHERE MAXIMUM RESISTANCE TO CORROSION , PRESSURE AND TEMPERATURE IS REQUIRED.
2.) STRAINER DESIGN
2.1 Strainer shall be flanged Wye type.2.2 Body configuration shall be inline with branch at 45 degree angle.2.3 Basket shall be CPVC, Perforations 1/4” on 3/8” centers or as specified.2.4 Minimum area ratio of pipe to basket shall be 10 to 1.2.5 Cover shall be CPVC with 1/2” minimum flush tap- flanged or threaded.2.6 Strainer shall be rated for 150 psi at 75 deg. F2.7 Strainer design shall conform to ASME code for non-metallic pressure vessels.2.8 Vendor shall supply min 5 years service history of applications in similar service.2.9 Strainers shall be as manufactured by Fluidtrol Process Technologies, Inc.
3.) CONSTRUCTION
3.1 Strainer body shall be of dual laminate construction: CPVC with FRP overwrap.3.2 Strainer body shall be solvent fused and backwelded prior to FRP overwrap. All joints to be spark tested.3.3 All flanges to ANSI 150 #.3.4 Exterior protection is unsaturated polyester resin based high quality gel coat- 10 mils min.
4.0) STANDARDS
4.1 All products shall conform to or exceed the specifications as set forth in the following standards:
Cell Class 23447-B as in ASTM D-1784, F-441, F-437, F-493, ANSI B 16.5 cl 150
!
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • P O B o x 1 4 1 8 • P e l h a m , A L , 3 5 1 2 4 • 2 0 5 - 4 4 4 - 9 3 5 5 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
CJP
Rectangle
Wye StrainersFluidtrol Process Technologies, Inc. manufactures Wye Strainers to standards that exceed industry standards. These
strainers are made for critical applications where high flow rates and high loading potential exists, while low pressure drops are desired.
Materials of Construction include PVC, CPVC, PP and PVDF lined FRP. This lamination construction combines the chemical resistance of the particular liner material (thermoplastic) and the structural strength of fiberglass. Wye Strainers are also offered in all-FRP construction. Resins can be used for high temperature and abrasive applications.
• EPDM lid gasket is standard, but Viton and Teflon are also options.• Flanged lid with stainless bolts, nuts and washers are standard. T-Handle Design for easy lid removal is an option.• Baskets are 1/4” perforated- made from same material as the strainer (FRP Wyes have PVDF Baskets). Other perfs/materials are available.• Pipe connections are Flanges. Threaded, socket, groove latch and True Union couplings are also available.• Flanged or threaded blowdown ports are provided.• Custom dimensions and designs are readily available.
!
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • P O B o x 1 4 1 8 • P e l h a m , A L , 3 5 1 2 4 • 2 0 5 - 4 4 4 - 9 3 5 5 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
A
H
L
WYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONS PERFORMANCE CRITERIAPERFORMANCE CRITERIAPERFORMANCE CRITERIA
Flange Size A H L Basket Surface
Area (in2)Ratio- BasketSurface: Pipe
Flow Rate = 1 psid (Clean Basket)
2” 23 12 15.625 72.2 23 140 GPM3” 28 18 21.375 72.2 10.2 140 GPM4” 32 18 23 207.2 16.5 400 GPM6” 39 20.875 28.25 384.3 13.6 790 GPM8” 48 26 33.125 594.6 11.8 1150 GPM10” 50 29.875 35 826.6 10.5 1600 GPM12” 56 32.875 41.875 1130.4 10 2230 GPM14” 60 41 45.25 1519.8 9.9 3000 GPM
CJP
Rectangle
CJP
Quote
SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC POLYPROPYLENE/FRP WYE STRAINERS
1.) SCOPE
THIS SPECIFICATION COVERS REQUIREMENTS FOR SIMPLEX FRP/PP STRAINERS. WYE TYPES INTENDED FOR USE IN CHEMICAL PIPING SYSTEMS WHERE MAXIMUM RESISTANCE TO CORROSION , PRESSURE AND TEMPERATURE IS REQUIRED.
2.) STRAINER DESIGN
2.1 Strainer shall be flanged wye type.2.2 Body configuration shall be in-line with Branch at 45 degrees.2.3 Basket shall be polypropylene, Perforations 1/4” on 3/8” centers or as specified.2.4 Minimum area ratio of pipe to basket shall be 10 to 1.2.5 Cover shall be PP with 1/2” minimum flush tap- threaded or flanged.2.6 Strainer shall be rated for 100 psi at 75 deg. F2.7 Strainer design shall conform to ASME code for non-metallic pressure vessels.2.8 Vendor shall supply min 5 years service history of applications in similar service.2.9 Strainers shall be as manufactured by Fluidtrol Process Technologies, Inc.
3.)CONSTRUCTION
3.1 Strainer body shall be of dual laminate construction: PP with FRP over-wrap.3.2 Strainer body shall be heat fused and back-welded prior to FRP over-wrap. All joints to be spark tested.3.3 All flanges to ANSI 150 #.3.4 Exterior protection is unsaturated polyester resin based high quality gel coat- 10 mils min.3.5 All welding to be performed by craftsman qualified and certified to ASTM C-1147
4.0) STANDARDS
4.1 All products shall conform to or exceed the specifications as set forth in the following standards:
Cell Class PP0110-A2-1510 /ASTM D4101, Cell Class PP0110-M30-A10120 ASTM-2467 & ASTM -2657
!
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • P O B o x 1 4 1 8 • P e l h a m , A L , 3 5 1 2 4 • 2 0 5 - 4 4 4 - 9 3 5 5 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
CJP
Rectangle
PVDF Wye StrainersFluidtrol Process Technologies, Inc. manufactures Wye Strainers to standards that exceed industry standards. These
strainers are made for critical applications where high flow rates and high loading potential exists, while low pressure drops are desired.
Materials of Construction include PVC, CPVC, PP and PVDF lined FRP. This lamination construction combines the chemical resistance of the particular liner material (thermoplastic) and the structural strength of fiberglass. Wye Strainers are also offered in all-FRP construction. Resins can be used for high temperature and abrasive applications.
• EPDM lid gasket is standard, but Viton and Teflon are also options.• Flanged lid with stainless bolts, nuts and washers are standard. T-Handle Design for easy lid removal is an option.• Baskets are 1/4” perforated- made from same material as the strainer (FRP Wyes have PVDF Baskets). Other perfs/materials are available.• Pipe connections are Flanges. Threaded, socket, groove latch and True Union couplings are also available.• Flanged or threaded blowdown ports are provided.• Custom dimensions and designs are readily available.
!
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • PO Bo x 1 4 1 8 • P e l h a m , A L , 3 5 1 2 4 • 2 0 5 - 4 4 4 - 9 3 5 5 ( P ) • 2 0 5 - 4 4 4 - 9 3 5 6 ( F ) • w w w . f l u i d t r o l . c o m
A
H
L
WYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONSWYE STRAINER DIMENSIONS PERFORMANCE CRITERIAPERFORMANCE CRITERIAPERFORMANCE CRITERIA
Flange Size A H L Basket Surface
Area (in2)Ratio- BasketSurface: Pipe
Flow Rate = 1 psid (Clean Basket)
2” 23 12 15.625 72.2 23 140 GPM3” 28 18 21.375 72.2 10.2 140 GPM4” 32 18 23 207.2 16.5 400 GPM6” 39 20.875 28.25 384.3 13.6 790 GPM8” 48 26 33.125 594.6 11.8 1150 GPM10” 50 29.875 35 826.6 10.5 1600 GPM12” 56 32.875 41.875 1130.4 10 2230 GPM14” 60 41 45.25 1519.8 9.9 3000 GPM
CJP
Rectangle
CJP
Quote
SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC PVDF/FRP STRAINERS
1.) SCOPE
THIS SPECIFICATION COVERS REQUIREMENTS FOR SIMPLEX FRP/PVDF STRAINERS. WYE TYPES INTENDED FOR USE IN CHEMICAL PIPING SYSTEMS WHERE MAXIMUM RESISTANCE TO CORROSION , PRESSURE AND TEMPERATURE IS REQUIRED.
2.) STRAINER DESIGN
2.1 Strainer shall be flanged Wye type.2.2 Body configuration shall inline with branch at 45 degree angle.2.3 Basket shall be PVDF, Perforations 1/8” on 3/16” centers or as specified.2.4 Minimum area ratio of pipe to basket shall be 10 to 1.2.5 Cover shall be PVDF with 1/2” minimum flush tap- flanged or threaded.2.6 Strainer shall be rated for 85 psi at 190 deg. F2.7 Strainer design shall conform to ASME code for non-metallic pressure vessels.2.8 Vendor shall supply min 5 years service history of applications in similar service.2.9 Strainers shall be as manufactured by Fluidtrol Process Technologies, Inc.
3.)CONSTRUCTION
3.1 Strainer body shall be of dual laminate construction: PN10 RATING with FRP over-wrap.3.2 Strainer body shall be machine fused and back-welded prior to FRP over-wrap. All joints to be spark tested.3.3 All flanges to ANSI 150 #.3.4 Exterior protection is unsaturated polyester resin based high quality gel coat- 10 mils min.
4.0) STANDARDS
4.1 All products shall conform to or exceed the specifications as set forth in the following standards:
Cell Class TYPE II as in ASTM D-3222, and ASTM-D-1785, ASTM-D-2467, ASTM-D-2464, ANSI B 16.5 cl 150 where applicable.
!
F l u i d t r o l P r o c e s s T e c h n o l o g i e s , I n c . • , • w w w . f l u i d t r o l . c o m
CJP
Rectangle
xxx x x xxx x x x
Industrial Series Strainer Part CodesGS1- GENERAL DUTY SERIES SIMPLEX GS2- GENERAL DUTY SERIES DUPLEXSSP1- SEVERE SERVICE FRP SIMPLEXSSP2- SEVERE SERVICE FRP DUPLEXWY1- WYE SERIES SIMPLEX
Housing Material Code:1-PVC2-CPVC3-PP4-PVDF
5- HALAR6- 304 SS (specify 316)7-CARBON STEEL8-FRP
Strainer Size Code:005-1/2"010-1"015-1-1/2"020-2"030-3"
040-4"060-6"080-8"100-10"120-12"
Basket Perforation Code:0-1/4" HOLES ON 3/8" STAGGERED CENTERS1-1/8" HOLES ON 3/16" STAGGERED CENTERS2-1/32" WIDE SLOTTED PIPE3-PP LINER ON 04-PP LINER ON 15-SPECIAL PERF OR LINER (Specify Size)
LINE END CONNECTION CODE:1-SOCKET2-SPIGOT3-FLANGED4-THREADED
Strainer Configuration Code:1-IN-LINE2-OFF-SET3-ANGLED OFF-SET4-BOOT5-OPPOSITE ANGLE OFFSET6-SPECIAL7-WYE
Basket Material Code:1-PVC2-CPVC3-PP4-PVDF
6-304 STAINESS (specify 316 SS)7-MONEL8-HASTELLOY9-CARBON STEEL
5-HALAR 10-TITANIUM
INDUSTRIAL SERIES STRAINER PART NUMBER CODE
