Fluid efficient coating of a pump casing - Corrocoat · Case study:Fluid efficient coating of a...
1
Case study: Fluid efficient coating of a pump casing Fluiglide treatment of the internal surfaces of a 14/12 hsc pump. Client Major pump manufacturer. Application date October 2007. Scope of work Chamfer split faces and flanges and prepare casing ring lands. Blast and coat internally with fluid efficient coating. Cast in ring lands. Products Corroglass 600 series. Plasmet ZF. Fluiglide. Internal coating system Grit blasted internally to ISO 8501 - Cleanliness Standard SA 2 1 / 2. Coated internally using Corroglass 600 Series to a minimum 750 DFT. Thickness checked. Spark tested at 9.5 Kv. Single coat of Fluiglide applied. External coating system Grit blasted externally to ISO 8501-1 – Cleanliness Standard SA 2 and applied one coat of Plasmet ZF. Coating credentials Fluiglide has been applied to thousands of pumps world wide, achieving significant improvements in efficiency. Fluiglide offers both increased efficiency levels and an effective corrosion barrier. Typical efficiency improvements of 4-6% are achieved using Fluiglide (subject to design and operational parameters. Photographs Left: Pump casing as received. Middle: Internals coated prior to ring land casting. Right: Pump fully re-furbished. Corrocoat Ltd, Forster Street, Leeds LS10 1PW Tel +44 (0) 113 276 0760 Fax +44 (0) 113 276 0700 www.corrocoat.com
Transcript of Fluid efficient coating of a pump casing - Corrocoat · Case study:Fluid efficient coating of a...
Case study: Fluid efficient coating of a pump casing
Fluiglide treatment of the internal surfaces of a 14/12 hsc pump.
ClientMajor pump manufacturer.
Application dateOctober 2007.
Scope of workChamfer split faces and flanges and prepare casing ring lands.Blast and coat internally with fluid efficient coating.Cast in ring lands.
ProductsCorroglass 600 series.Plasmet ZF.Fluiglide.
Internal coating systemGrit blasted internally to ISO 8501 - CleanlinessStandard SA 21/2.Coated internally using Corroglass 600 Series to aminimum 750 DFT.Thickness checked.Spark tested at 9.5 Kv.Single coat of Fluiglide applied.
External coating systemGrit blasted externally to ISO 8501-1 – CleanlinessStandard SA 2 and applied one coat of Plasmet ZF.
Coating credentialsFluiglide has been applied to thousands of pumpsworld wide, achieving significant improvements inefficiency.Fluiglide offers both increased efficiency levels and aneffective corrosion barrier. Typical efficiencyimprovements of 4-6% are achieved using Fluiglide(subject to design and operational parameters.
PhotographsLeft: Pump casing as received.Middle: Internals coated prior to ring land casting.Right: Pump fully re-furbished.
Corrocoat Ltd, Forster Street, Leeds LS10 1PW Tel +44 (0) 113 276 0760 Fax +44 (0) 113 276 0700 www.corrocoat.com
