FLOOR FINISHES and SEALERS STRIPPERS and …...floor finishes will help insure the best results for...

2
FLOOR CARE SYSTEM TOTAL PERFORMANCE™ FLOOR CARE SYSTEM TOTAL PERFORMANCE™ FLOOR FINISHES and SEALERS STRIPPERS and NEUTRALIZERS QUALITY INNOVATION PERFORMANCE FLOOR MAINTENANCE 19402 Susana Road Rancho Dominguez, CA 90221 Tel: 800.227.4798 • 310.632.7124 Fax: 310.631.7496 • www.flo-kem.com 19402 Susana Road Rancho Dominguez, CA 90221 Tel: 800.227.4798 • 310.632.7124 Fax: 310.631.7496 • www.flo-kem.com Floor Finishes Sealers Strippers & Neutralizers Floor Maintenance

Transcript of FLOOR FINISHES and SEALERS STRIPPERS and …...floor finishes will help insure the best results for...

Page 1: FLOOR FINISHES and SEALERS STRIPPERS and …...floor finishes will help insure the best results for your facility needs. Strippers & Neutralizers FL# 3665 MOP & STRIP NO RINSE A non-ammoniated

FLOOR CARE SYSTEMTOTAL PERFORMANCE™

FLOOR CARE SYSTEMTOTAL PERFORMANCE™

FLOOR FINISHESand SEALERS

STRIPPERS andNEUTRALIZERS

QUALITYINNOVATIONPERFORMANCE

FLOORMAINTENANCE

19402 Susana Road

Rancho Dominguez, CA 90221

Tel: 800.227.4798 • 310.632.7124

Fax: 310.631.7496 • www.flo-kem.com

19402 Susana Road

Rancho Dominguez, CA 90221

Tel: 800.227.4798 • 310.632.7124

Fax: 310.631.7496 • www.flo-kem.com

FloorFinishes

Sealers

Strippers & Neutralizers

FloorMaintenance

Page 2: FLOOR FINISHES and SEALERS STRIPPERS and …...floor finishes will help insure the best results for your facility needs. Strippers & Neutralizers FL# 3665 MOP & STRIP NO RINSE A non-ammoniated

Floor MaintenanceFL# 5767 NEUTRA BRITEA neutral floor cleaner formulated to clean waxed floors without harming the finish. This low foam cleaner enhances the appearance of floors and eliminates the need for rinsing. Excellent daily maintainer for all types of floor care programs. Yellow color with a lemon scent. Dilute at 2 oz. per gallon.

FL# 11166 NEUTRAL DISINFECTANT CLEANERA 2 oz. per gallon hospital grade neutral pH disinfectant cleaner deodorizer for use in hospitals, nursing homes, schools, hotels and restaurants. This product is very effective in controlling cross contamination and can be used on waxed floors without dulling the finish. Yellow color with a linen fragrance.

FL# 150 SPRAY BUFFA spray buff compound designed to clean and polish all types of floor finishes. This product removes black marks, scuffs and soil. Improves the gloss without damage to the finish. An important part of any weekly burnishing program. Light blue color with a floral scent.

FL# 2912 TOP DRESSING FLOOR RESTORERThis floor restorer will enhance and restore the appearance of a floor finish used with high speed burnishing machines. Burnishing with this product increases the durability of the floor finish and helps create a “wet look” appearance. Resists soil penetration and reduces the time needed for stripping. Mild scent. Dilute 15 oz. per gallon.

P

Floor SealersFL# 139 UNDERCOATER & SEALERAn acrylic sealer formulated for resilient and non resilient floors. Chemical resistant and provides a strong barrier against dirt penetration. Improves the durability and gloss of floor finishes. Effective on porous and non porous floors. Strong resistance to scuff and heel marks.

FL# 133 FLO CRETE II Indoor/Outdoor SealerAn acrylic emulsion sealer for use on both indoor and outdoor non resilient flooring. Durable, chemical resistant and will not whiten or peel from exposure to sun and rain. Excellent for use on concrete, terrazzo, quarry tile, slate and other hard surfaces. Makes cleaning easier and helps to preserve the integrity of the flooring. Used in warehouses, garages, manufacturing plants and on outdoor stone/tile flooring. Coverage is approximately 1500 square feet per gallon.

FL# 11195 PENETRATING SEALERDesigned to protect and seal the interior of stone surfaces to include marble, granite, limestone, concrete, slate, terrazzo, brick, masonry and porous ceramic tile. Provides an invisible, breathable sealer within the substrate that repels soils and oils. Allows the substrate to be easily cleaned and maintained. Coverage will vary upon the porosity of the substrate with average being approximately 600 to 1,000 square feet per gallon.

P

TOTAL PERFORMANCE™ Floor Care SystemThe Total Performance™ Floor Care System provides you with a complete system of products for all your floor care requirements. From demands for low and high speed maintenance programs to challenges with concrete, stone and tile flooring, Total Performance™ Floor Care System gives you an integrated program of product solutions.

Our step by step procedure for using our Total Performance™ floor finishes will help insure the best results for yourfacility needs.

Strippers & NeutralizersFL# 3665 MOP & STRIP NO RINSEA non-ammoniated mop and strip that saves time in rinsing as compared to conventional strippers. Easily removes all types of finishes burnished by high speed floor machines. Controlled foam for vacuum use. A dark blue color with a fresh lemon scent for areas requiring minimal product odors. Dilute at 40 oz. per gallon for general stripping.

FL# 11328 SUPER HEAVY DUTY STRIPPERDesigned to remove heavy finish buildup while reducing labor time. Works very well on all strippable finishes and sealers. Low foaming with a floral scent. Purple color with a dilution of 12 oz. per gallon.

FL# 374 NEUTRALIZER FLOOR RINSEA mild acid solution formulated to neutralize alkaline residue after the stripping process. Reduces labor time and helps to ensure a stronger bond when new floor finish is applied. Clear with a fresh scent.

P

Floor Finishes

FL# 144 MIRAGEA urethane fortified product (19% solids) formulated to provide a strong durable floor finish. Designed for use in both low maintenance and high speed programs. This product does not require daily burnishing to maintain its shine. However, if a higher shine is necessary, Mirage can be high speed burnished with an electric or propane floor machine. Excellent for use in schools and other areas with a restricted maintenance program.

FL# 9138 STAR BRITE 20A durable floor finish (20% solids) designed for high speed burnishing. Resists scuff and scratch marks and cleans up easily. Holds up very well to repeated burnishing and leaves a high gloss appearance. With a good daily and weekly maintenance program, Star Brite 20 stays on the floor longer and requires only limited re-coating.

FL# 9139 STAR BRITE 22 The next level of performance in the Star Brite line, this finish offers a good initial lay down shine with more durability for heavier traffic areas. Excellent for use in office buildings and healthcare facilities. Burnishes to a high gloss appearance.

FL# 9096 STAR BRITE 25This finish reduces the number of coats needed for a high gloss appearance. This higher solids finish is very user friendly, easy to maintain and provides a good foundation with 3 coats. Performs well in supermarkets, retail and other high volume traffic environments. Star Brite 25 helps to minimize product and labor costs.

PUL Classified Floor Coating and Finishing Materialas to Slip Resistance Only. 180S

1. Dust mop the floor to remove all loose soil.

2. Use #3665 Mop & Strip, No Rinse Stripper at 40 oz. per gallon of water to remove all old floor finish. For extra tough stripping jobs, use #11328 Super Heavy Duty Stripper at 12 oz. per gallon of water.

3. Apply the stripper solution liberally and allow to sit for 5 minutes to loosen the old finish. Once the stripping solution begins to bubble, this is a sign the old finish is loosening up. Use a black stripping pad and a floor machine to help agitate and remove the old finish. If a floor machine is not available, use a strip mop to agitate and remove the finish.

4. Use a wet/dry vac or a string mop to pick up the stripper solution and finish material. Make sure all the old finish is removed from the floor. If not, please repeat steps 2 and 3.

5. Once all the finish is removed, use a clean mop to apply a clear water rinse over the entire stripped surface. If you stripped with #11328 Super Heavy Duty Stripper, use the #374 Neutralizer Rinse to neutralize any alkaline residue on the floor. Once the floor is clean and dry, you are ready to apply floor finish.

6. Use a clean finish or micro fiber mop to apply one of the Total Performance™ floor finishes (#144 Mirage, #9138 Star Brite 20, #9139 Star Brite 22 or #9096 Star Brite 25). Apply 5 coats of finish as a foundation for all finishes except Star Brite 25 (use 3 coats of this finish as a foundation). Allow 20-30 minutes drying time between coats. A sealer is not necessary. However, for added durability in heavy traffic areas, we recommend you apply an initial coat of #139 Undercoater & Sealer before applying finish.

7. For best results, allow 24 hours for the floor to dry before burnishing. If necessary, you can burnish the floor as soon as 2 hours after drying. See Floor Pad Recommendation Chart.

8. Maintain floors daily by damp mopping with #5767 Neutra Brite at 2 oz. per gallon of water. This will clean the floor and prolong the life of the finish. This product can also be used through an auto scrubber.

9. On a daily or weekly basis, you may want to enhance the floor’s shine by burnishing with #150 Spray Buff. This product also aids in cleaning spots from the floor. If working on heavy traffic floors, you can use #2912 Top Dressing Floor Restorer to reinforce the floor finish foundation and enhance the shine.

10.On a periodic basis, you can re-build the floor finish foundation with a scrub and re-coat. Use a blue scrub pad and #5767 Neutra Brite at 2 oz. per gallon of water. Remove the “worn down” top coat and apply 2 coats of floor finish. Maintain per instructions above.

TOTAL PERFORMANCE™ Floor Care ProceduresFOR STRIPPING, FINISHING & MAINTAINING HARD SURFACE FLOORS

Directions for Use

FLOOR CARE TIPS• Properly clean all mops after use.

• Properly clean all floor pads after use.

• Properly clean all mop buckets and other equipment.

• Make sure your auto scrubber and floor machines are in good working order.

• Dispose of all old, worn mops and pads.

FLOOR PAD RECOMMENDATION CHARTUse on floor machines operating at 1000-3000 rpm.

3M: Aqua Burnishing PadAMERICO: Aqua or Champagne Burnishing PadGLIT/MICROTRON: Blue Ice or Beige Burnishing Pad

TheabovepadrecommendationsareaguidetohelpyouselectthecorrecttypeoffloorpadtousewiththeTotalPerformance™FloorFinishes.Asthisisaguideline,othermanufacturersmayoffersimilarproductscompatiblewiththesefinishes.DonotuseanytypeofnaturalhairpadontheTotalPerformance™FloorFinishes.