FLOOR COVERING REMOVAL MACHINES - Janserjanser.pro/downloads/catalogs/remove.pdf · FLOOR COVERING...
-
Upload
truongdien -
Category
Documents
-
view
219 -
download
2
Transcript of FLOOR COVERING REMOVAL MACHINES - Janserjanser.pro/downloads/catalogs/remove.pdf · FLOOR COVERING...
1
34 www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
Power-Stripper
Designed for continuous heavy use
IMPORTANT FEATURES:
- Original Flex 2000-watt motor
(3 hp)
- Large bearings for long life cycle
- Adjustable handgrips to suit any
height
- Optional T-handle available
- Mechanical components
completely enclosed, eliminating
penetration of adhesive into blade
assembly and bearings
- Padded cushion at top of handle to
increase pressure with bodyweight
Serrated Blade
- Removes floor coverings with felt/fleece backing
- Serrated edge cuts off fibres
- Teflon coating keeps adhesive away from blade
FLOOR COVERING REMOVAL MACHINES
230 V 111 095 000
complete with adjustable long handle, 2spare blades and blade protector, carryingcase optional extra
Power supply 230 V or 120 V Motor power 2000 Watt (3HP)Working width 210 mm (8¼")Weight 14.4 kg (31,8 lbs)
TECHNICAL SPECIFICATION
120 V 111 093 000
Order No. 111 080 001
Spare Parts / Accessories
Blade 210x60x1 mm (8¼x2½x1/16")
Blade 210x130x 1mm (8¼x51/8x1/16")
Order No. 111 080 002
Carrying Case 111 090 200
Wheels 111 095 900
Order No. 111 095 400
Leather Pocket 111 920 000
Serrated Blade 210 x 60 x 1.5 mm (8 ¼"x2 3/8"x1 1/16")
T-Handle 111 095 079
Air-powered Chisel Scraper
Easily removes vinyl tiles, linoleum, ceramic
tiles, carpet, paint build up and more.
See page 76 for compressor
TECHNICAL SPECIFICATION
Standard equipment includes:· Carrying case· 2 extensions with 410 mm (16 1/8") each· 1 offset chisel 80 mm (3 1/8")· 1 flat chisel 200 mm (7 7/8")· 1 tile removal blade· 1 oiler
Order No. 111 094 500
Air consumption 163 L/minPressure 6.3 barWeight 5 kg (11 lbs)
Compact StripperFor working in smaller spaces
Suitable for the removal of residual
foam and adhesive in confined areas
such as stairs and walls.
The Compact Stripper uses a flexible
blade which is housed inside a shock
absorbing system. Switch for
constant use.
Spare Parts / Accessories
Spare Blade 200 mm (7 7/8") - serrated
Order No. 111 094 300
Order No. 111 094 310
Spare Blade 200 mm (7 7/8") - straight
Order No. 111 094 210
Flat Chisel 200 mm (7 7/8")complete with serrated blade
For the removal of extremely toughPU-adhesive
Order No. 111 094 320
Offset chisel 80 mm (3 1/8")
230 V 111 112 000
complete with carrying case and 2 spareblades, long handle optional extra
Power Supply 230 V or 120 V Motor Power 700 Watt (1HP)Working width 150 mm (6")or 235 mm (9")Weight 3.5 kg (7.7 lbs)
TECHNICAL SPECIFICATION
Order No. 111 102 165
Spare Parts / Accessories
Blade 150x60x1 mm (6x2½x1/16")
Blade 235x60x1 mm (9¼x2½x1/16")
Detachable Handle
Order No. 111 103 250
Order No. 111 112 010
1
35www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
Removal Machine ELEPHANTRemoves any kind of sheet flooring easily without producing dust or noise.
* SIMPLE * LOW-COST * DUST-FREE * SILENT
Delivery complete with:Flat chiselWide Scraper 100 mm
ADVANTAGES:
- Flexible working width up to 80 cm (2’7 1/2”),
stripper machines up to 35 cm (13 3/4”)
- Light weight, approximately 30 kg (66.14 lbs) plus
transformer 18kg (39.68 lbs.)
- Can be carried by one person
- Noise and dust free operation
- Removes old adhesives, coatings, and flooring material
- High performance, approximately 80-100 m2/h (860-1080 sq./h)
- The roller rotates only 13 rpm and the powerful driving unit needs
only 50 or 60V DC so it can be driven forward and in reverse
without danger
- 230V or 120V are required for the transformer.
Very easy operation: Near walls only a strip of approx. 10 cm (4") has tobe removed manually. The rest of the job is doneby the ELEPHANT almost automatically.
Cut the floor covering from the roll witha knife or reverse roll the machine.
COSMO II STRIPPERA powerful stripper for small and medium-sized areas.
The COSMO Stripper works on wooden or concrete surfaces and
will remove virtually any substance adhering to the floor.
The handle and wheel adjustments allow different settings of the blade
to fit the floor, while keeping the handle in a proper operating position.
An ideal addition to the Power Stripper and MASTER MOBIL.
- Adjustable cutting angle
- Adjustable handle
- Machine runs virtually silent with reduced vibration (62DB)
- Big wheels ensure comfort and efficiency
- Simple and fast disassembly for storage or transport
in the boot of a car Adjustment of cutting angle
FLOOR COVERING REMOVAL MACHINES
Angle Shank Attachment
For hard-to-remove materials
such as wood, ceramic and
epoxy coatings.Patent-No.: 6813834
Power Supply 230 VMotor Power 1600 WattBeat Energy 27 JouleWorking Widthdepending on chisel 20-300 mmDimensions HxWxL 100 x 60 x 110 cmWeight 45 kg
TECHNICAL SPECIFICATION
Order No. 111 140 000
Order No. 111 140 010
Order No. 111 140 030
Order No. 111 140 020
Order No. 111 140 040
Spare Chisel
Flat Chisel 300 x 75 mm(11 13/16 x 3")
Offset Chisel 300 x 75 mm(11 13/16 x 3")
Wide Scraper 100 mm (3 15/16")
Wide Scraper 300 mm (11 13/16")
Chisel Stripper PM 1600The professional electric chisel with chassis
Removes parquet, ceramic tiles, rubber and other flooring or roofing material.
Peels off elastic bonding and pvc coatings.
Important Features:
adjustable in working angle and height
anti-vibration rubber handles
Safety switch (Emergency OFF)
Easy to transport with heavy duty rubber wheels
See page 41 for spare bladesSee page 34 for serrated blade
Power Supply 230 V or 120 VMotor Power 750 Watt (1HP)Weight 54 kg (119 lbs)Working width 254 mm (10")
TECHNICAL SPECIFICATION
Complete with- 2 Spare Blades - Angle Shank- Angle Shank Holder- Serated Blade- 10 m (11yd) extension cable
Order No. 111 820 000
Order No. 111 050 990
Elephant-Video
230 V 111 050 000
Delivered complete with transformer
1
36 www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
Noise level
MasterMobil
StratoMobil
Othermachines
Order No. 111 700 030
Transportation Aid
Order No. 111 730 900
Order No. 111 730 950
Angle Plate 4°
Angle Plate 8°
Easy mounting insidethe blade holder
Angle Plate
Enables to reduce the working angle
of the blade to the subfloor.
This adjustment can improve the removal performance.
The angle plate is available with a 4 or 8 degree reduction.
We recommend:- on soft subfloors (i.e. wood) 8 degree angle plate - on medium subfloors (i.e. levelling compound) 4 degree angle plate- on hard subfloors (i.e. concrete) usually it is best without the angle plate
Order No. 111 800 420
Additional side weight
24kg (52 lbs) Angle Shank Holder
for MASTER-MOBIL
Order No. 111 700 420
for STRATO-MOBIL (Version 1)
Angle Shank
MASTER MOBIL
Self-propelled machine.
Hydraulic technology combined with
variable speed and quiet operation.
The lower weight makes the MASTER-MOBIL
the perfect solution for medium-size projects.
Optional Accessories for STRATO / MASTER
further spare blades see page 41
Order No.111 800 101
Order No.111 700 102
Order No.111 800 103
Order No.111 800 104
European
Patent-No.:
EP 60130811.5
FLOOR COVERING REMOVAL MACHINES
Order No. 111 800 000
complete with 4 different spare blades,extension cable and tool kit
Power Supply 230V or 120 V
Motor Power 0.75 kW (1HP)
Weight 79 kg (174 lbs)
incl. front weight 93 kg (205 lbs)
TECHNICAL SPECIFICATION
Order No. 111 820 110
Order No. 111 820 120
1
37www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
Working PositionsTransport Position
STRATO-MOBIL III
Angle of the handle is adjustable to six different positions in order to match the individual
height of the operator or preferred working position.
Hydraulic driven turning handle control with adjustable comfort grips for easier operation.
Increased power through modified hydraulic technology.
Adjustable blade holder which allows to adjust the angle of the blade according to the removal
conditions in order to ensure best possible removal rates.
Proven benefits:
- Extremely quiet operation
- Easy release slide weights on the side of the machine to allow a perfect
weight balance according to the job condition
- rounded front weight which ensures the removed materials slide
away smoothly without impeding the machine´s forward movement
Net weight: approx. 115 kg
Total weight: approx. 180 kg
STRATO MOBIL II
Hydraulic technology applied to the well known features of self-propelled
removal machines. Compared with other strippers the STRATO MOBIL Hydraulic
works extremely quietly. Very easy operation achieved through automatic drive
with forward and reverse function.
Improved features:
- Blades can be set at different angles
- Weights can be adjusted to a position above the blades to change
the center of gravity for different uses
- Weight at the front can easily be removed
- Angle of handle can be adjusted
- New frontal guide redirects stripped off material without impeding
the forward movement of the machine
Order No. 111 730 000
further spare blades see page 41
Order No.111 700 101
Order No.111 700 102
Order No.111 700 106
Order No.111 700 104
European
Patent No.:
EP 60130811.5
FLOOR COVERING REMOVAL MACHINES
Power Supply 230 V or 120 VMotor Power 1.1 kW (1½HP)Voltage 8 Amp or 13 AmpWeight machine 115 kg (250 lbs)Total weight 180 kg (409 lbs)inclusive additional weights
TECHNICAL SPECIFICATION
230 V 111 720 000
complete with 4 different spare blades,extension cable and tool kit and trolleybase
120 V 111 720 500
1
38 www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
The Ride-On in the Propane Gas Version has beendesiged for continuous flooring or adhesive removalon commercial job sites.
The machine can be run without electricity supply orbattery charging times and therefore allows for extentedrun time.
Low noise level of 73-77 dB(A)
GAS power: Pressure 138 barSpeed up to 61 m (200') / minMotor Power 16 PS (12 kW)
DIMENSIONS: Length (without blade holder):1295 mmWidth 620 mmHeight with seat: 1168 mm
WEIGHT: machine appr. 598 kgadditional front weight appr. 196 kgadditional rear weight appr. 33 kg
Order No. 111 410 000
Ride-on-Mobil Electro-Version
Comes complete with- Tool Kit - Blade Holder 305 mm (12")- Self scoring Spare Blade
305 x 76 x 1,6 mm (12x3x0,062")
Comes complete with- Tool Kit - Blade Holder 305 mm (12")- Self scoring Spare Blade
305 x 76 x 1,6 mm (12x3x0,062")- Extension Cord 30 m (32' 10'')
MOTOR: Power Supply 230 V or 110 V Motor Power 2 x 1100 Watt (1.5HP)SPEED: up to 35 m (114') /min
DIMENSIONS:Length (without blade holder):
1270 mm (50")Width 620 mm (24 ½")Height 680 mm (26 3/3")Height with seat: 1000 mm (39")
WEIGHT: Base machine weight 365 kg (805 lbs)Total weightincl. additional weights 540 kg (1190 lbs)
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION
Characteristics:
- Easy to operate
- Complete hydraulic controls
- Quiet operation without fumes
- Adjustable blade pitch and angle
- Zero turn radius
- Non-marking tires
- Easy to transport, load and unload, fits through
standard doorways and elevators
- Quick and easy change of blade
- Variety of blades available
Order No. 111 460 000
Ride-on-Mobil GAS-Version
Spare blades see page 41Loading ramps see page 166
FLOOR COVERING REMOVAL MACHINES
Spare blades see page XXLoading ramps see page XX
1
39www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
Comes complete with- Tool Kit - Blade Holder 305 mm (12")- Self scoring Spare Blade
305 x 76 x 1,6 mm (12x3x0,062")- Extension Cord 10 m (32' 10") for charger
Comes complete with- Tool Kit - Blade Holder 305 mm (12")- Self scoring Spare Blade
305 x 76 x 1,6 mm (12x3x0,062")- Extension Cord 10 m (32' 10'') for charger
Ride-on-Mobil ADB-Version
Appropriately named, this machine offers battery run times exceedingthe average eight-hour day.
It has the ability to operate through an entire workday (8-12 hours)without requiring a battery change, recharge or electrical cord assistance.
The on-board, built-in charging system has the versatility to plug into anyoutlet.The higher machine weight enables for even more effective removal workusing wider blades or chisels.
Higher speed and increased weight allow
at least 30% more productivity.
Included is the hydraulic front angle plate for quick
and precise modification of the tilt angle.
"HIGH-SPEED"
TECHNICAL SPECIFICATION
Spare blades see page 41Loading ramps see page 166
Spare blades see page 41Loading ramps see page 166
Order No. 111 450 000
BATTERY: Run Time 8 - 12 hoursCharging Time 8 - 10 hoursSpeed up to 37 m (40 ½yd) /min
DIMENSIONS:Length(without blade holder): 1372 mm (4’6")Width 622 mm (24 ½")Height 882 mm (34 ¾")Height with seat: 1219 mm (3’12")
WEIGHT:Machine only 850 kg (1874 lbs)Total weight incl.additional weights 950 kg (2094 lbs)
Ride-on-Mobil ADB "HIGH-SPEED" - Version
TECHNICAL SPECIFICATION
Order No. 111 457 000
BATTERY: Run Time 7 - 10 hours Charging Time 8 - 10 hours Speed up to 60 m (197') /min
DIMENSIONS: Length (without blade holder): 1524 mm (5') Width 762 mm (2,5') Height 890 mm (3') Height with seat: 1244 mm (4')
WEIGHT: Total weight incl. additional weights & front angle plate 1164 kg (2566 lbs)
FLOOR COVERING REMOVAL MACHINES
Order No. 111 400 997
Demo DVDRide-on / Strato-Mobil / Master-Mobil
1
40 www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
Order No. 111 490 000
Accessories Set - large version (see figure)
Delivered in a metal carrying case on wheels complete with:7 different blade holders12-piece set of replacement blades2 self-scoring blades width 305 mm (12") and 685 mm (27")4-piece set of blade shanks1 set of scraper blades (50 pcs) 305 x 22 mm (12x7/8")1 blade with collecting container
Order No. 111 495 000
Accessories Set - small versionDelivered in a metal carrying case on wheels complete with:4 different blade holders5-piece set of replacement blades1 self-scoring blade width 305 mm (12") 1 angled Blade Shank1 set of scraper blades (50 pcs) 305 x 22 mm (12x7/8")
Cutting Heads
Available in 8 different widths,
corresponding spare blades in
different strengths and cutter blades
RIDE-ON Accessories - Ready for any job!
The accessorie sets are a compilation of the most popular and most frequently used tools for our Ride-on machines
Optional Accessories
Order No. 111 400 113
Order No. 029 300 003
Locking Bracket Ø 9,5 x 70 mmSecuring Shaft Extension
Locking Pin Ø 8,0 x 45 mmSecuring Cutting Head
FLOOR COVERING REMOVAL MACHINES
The batteries should be replaced after approximately 400 charging
cycles.
After a prior consultation with our service department, please send us
your used set of batteries and we will return a new set of batteries to
you as soon as possible.
Hydraulic Front Angle PlateThe hydraulic front angle plate can be supplied and fitted to all
versions of Ride-On as an option to the manually adjustable version.
Blade angles can be adjusted quickly and precisely by the operator
without having to get off the machine. This saves time, especially on
building sites with different floor removal requirements.
An additional 90 kg above the blade ensures an increase in removal
capacity.
low
position
high
position
Order No. 111 400 997
Ride-on / Strato-Mobil / Master-Mobil
Demo DVD
Blade Extension
is used to reach inaccessible
areas and for thick foam or
parquet flooring.
Order No. 111 400 485
Pack of 50 pcs 111 400 420
Width 305 mm (12") 111 400 880
for Blades:
Blades 304 x 22 mm (12x7/8")
Width 80 mm (3 1/8") 111 400 498
Width 40 mm (1 1/2") 111 400 497
Width 152 mm (6") 111 400 110
Width 203 mm (8") 111 400 120
Width 254 mm (10") 111 400 130
Width 305 mm (12") 111 400 140
Width 355 mm (14") 111 400 150
Width 686 mm 111 (27") 111 400 160
Hydraulic front angle plateWeight: 90 kg
(Upgrade plus reassembling costs)
Order No. 111 455 000
Order No. 111 430 770
Battery set needed for Ride-on Mobil
Order No. 111 430 745
Spare battery set needed for Ride-on Mobil
Individual batteries available upon request.
Order No. 111 430 780
Charging Station complete
Order No. 111 430 730
Battery Charger
1
41www.janser.com
SUBFLOOR- AND SURFACE TREATMENT
Tough, long lasting, self-scoring blades. 90°angled self scoring wings. Works on vinyl back, soft to medium PVC,linoleum, carpet tiles.
45° angle. The thickness greatly reducesbreakage, especially on heavily weightedmachines
Removal of wood flooring
Self-scoring blades
Standard
Blades
Blades
Ultra high quality spring steel is extra hard forlong blade life.
Works on all glued down carpets,VCT, VAT,rubber tile, cork, re-scraping adhesive,elastomeric coatings.
A heavy duty blade that still has a little flex.Works on VCT, VAT, wood, tile, rubber epoxy,thin-set, elastomeric coatings, scraping thin-set, glued ceramic
Ultra tough coatings, ceramic & hardwood
Extremely hard, high abrasion wood, tile,lighter ceramic
Premium
Blades
Heavy Duty
Blades
Extra Heavy
Duty Blades
152 x 102 mm 1.6 mm (4x6“) (0.062") 111 800 101 x x / x
223 x 76 mm 1.6 mm (3x9“) (0.062") 111 800 106 x x / - x
223 x 76 mm 1.6 mm (3x9“) (0.062") 111 700 108 - / x
305 x 76mm 1.6 mm (3x12“) (0.062") 111 700 101 x / x x
360 x 76 mm 1.6 mm (3x14“) (0.062") 111 700 107 x / x x
40 x 40 mm 2.4 mm (1½x1½")(0.094") 111 400 495 x
80 x 40 mm 2.4 mm (3.1x1½")(0.094") 111 400 496 x
255 x 76 mm 2.4 mm (3x10“) (0.094") 111 400 492 x / x x
305 x 76 mm 2.4 mm (3x12“) (0.094") 111 400 490 x / x x
355 x 76 mm 2.4 mm (3x14“) (0.094") 111 400 491 x / x x
685 x 76 mm 2.4 mm (3x27“) (0.094") 111 400 499 x
Dimensions Order No. COSMO II MASTER/STRATO RIDE-ON
145 x 102 mm 1.6 mm (4x6") (0.062") 111 800 104 x x / x x
152 x 127 mm 1.6 mm (5x6") (0.062") 111 700 102 x x / x x
254 x 76 mm 1.6 mm (3x10") (0.062") 111 700 103 x x / x
Pre-cut as well as removal of sport floorcoverings
V-Blade 155 x 75 mm 2,4 mm 111 400 370 x
152 x 76 mm 1.6 mm (3x6") (0.062") 111 400 210 x x / x
203 x 76 mm 1.6 mm (3x8") (0.062") 111 400 220 x x / x x
254 x 76 mm 1.6 mm (3x10“) (0.062") 111 800 103 x x / x x
304 x 76 mm 1.6 mm (3x12") (0.062") 111 400 240 x x / x x
355 x 76 mm 1.6 mm (3x14") (0.062") 111 400 250 x / x x
685 x 76 mm 1.6 mm (3x27") (0.062") 111 400 260 x
152 x 76 mm 2.4 mm (3x6") (0.094") 111 400 310 x x / x x
203 x 76 mm 2.4 mm (3x8") (0.094") 111 400 320 x x / x x
254 x 76 mm 2.4 mm (3x10") (0.094") 111 700 104 x x / x x
304 x 76 mm 2.4 mm (3x12") (0.094") 111 400 340 x x / x x
355 x 76 mm 2.4 mm (3x14") (0.094") 111 400 350 x x / x x
685 x 76 mm 2.4 mm (3x27") (0.094") 111 400 360 x
152 x 76 mm 4.5 mm (3x6") (0.18") 111 700 106 x x / x x
152 x 76 mm 6.35 mm (3x6") (0.25") 111 700 105 x x / x x
Mainly used for VCT, but can be used on mostother applications.Supplies more of an anglewhen angles is needed.
for TURBO-STRIPPER
Increased Angle
Blade
Spare Blades
200 x 75 mm 1.6 mm (3x8") (0.062") 111 400 480 x x / x x
250 x 75 mm 1.6 mm (3x10") (0.062") 111 400 481 x x / x x
350 x 60 mm 1,5 mm (3x2½") (0.062") 111 600 001
350 x 60 mm 1,0 mm (3x2½") (0.04") 111 600 003
For ceramic tiles, thick epoxy coatings orthermo-plastic coatings. With carbide tip for extended usage
Straight shank
with carbide tips50 x 100 mm (2x4") 111 400 451 x
100 x 100 mm (4x4") 111 400 456 x
152 x 100 mm (6x4") 111 400 452 x
Angled shank and cutting head for precisesetting of cutting angle. With carbide tip forextended usage
Angle shank
blade
50 x 100 mm (2x4") 111 400 453 x
152 x 100 mm (6x4") 111 400 454 x
To lift difficult to remove floor coverings fromunderneath. Especially suited to remove gluedor nailed down parquet floors. Also to be usedfor PVC or ceramic tiles. With carbide tip forextended usage.
50 x 200 mm (2x8") 111 400 473 x
90 x 200 mm (3.5x8") 111 400 474 x
The long length allows the blade to easilyslide under tough material. Works well onmost ceramics and VCT. Carbide tipped forholding a sharp edge for long periods.
For the removal of ceramic tiles and filler.Strong carbide tip allows sharpening andextended usage.
Angle Shank
Blade with
carbide tips
Ceramic Shank
Blade
90 x 200 mm (3½x8") 111 400 478 x
50 x 270 mm (2x10 5/8") 111 400 479 x
90 x 270 mm (3½x10 5/8") 111 400 482 x
50 x 150 mm (2x6") 111 400 460 x
100 x 150 mm (4x6") 111 400 461 x
150 x 150 mm (6x6") 111 400 462 x
FLOOR COVERING REMOVAL MACHINES