FloMAX Diesel Fuel Nozzles... · Flomax Diesel Fuel Nozzles 3 FN600BL • With your palm on the...
Transcript of FloMAX Diesel Fuel Nozzles... · Flomax Diesel Fuel Nozzles 3 FN600BL • With your palm on the...
FloMAX
Diesel Fuel Nozzles
• FloMAX fuel nozzles connect to all standard fuel receivers.
• Nozzlesshipcompletewithahighflowballbearingswivel with female 1½" NPT thread.
• lightweight:6.6lbs.withswivel
• felt seal to keep dirt out of locking mechanism
• heat treated stainless steel wear parts
• Patentpendingpistonassemblyallowsthecylindertobeeasilyremovedforrebuilding.
How It Works
Designed for on-site refueling of construction, mining, forestry and agricultural equipment. Interchanges with Caterpillar® and Wiggins systems.
Features
• Thedieselfueltankhasaventatthetopandafuelreceiveratthebottom.
• Thetankisfilledfromthebottomtohelppreventfoaming.
• Attach the FloMAX nozzle to the receiver and lift the actuator handle to the on or open position.
• Asthefuelfillsthetankfromthebottom,airexitsthetopthroughthevent.
• Whenthefluidlevelreachestheventtube,thehollowballinthetubewillfloat,pushingthesolidballuptoclosetheventandstoptheairflowoutofthetank.
• Withnoairventingoutofthetank,pressurewillbuildinsidethetank.
• Pressurebuildsupinthetankreachingapproximately8PSIinthetankandinsidethenozzle.
• Aspressureincreasesinthenozzlecylinderassembly,thepistonispushedbackagainstthepistonspring.
• Whenenoughpressurepushesthepistonback,thenozzleclosestheopeningforthefuelflowandthenozzleisshutoff.
• Rotatetheactuatorhandletherestofthewaytolockitintheoff position.
• Afterthenozzleisshutoffitcanbedisconnectedfromthereceiver.
FloMAX
2 Flomax Diesel Fuel Nozzles
FN600
• Withyourpalmonthehandleandyourfingersonthepullbackhandle,pullittowardsyouuntilthelockingdogslockintheOPENpositionandthepullbackhandlelocks in the OPEN position. see figure 1
• Tocheckifitisopened,looktoseeifthedogsarelockedopenandareoutsideoftheIDofthefrontassembly.see figure 2A (open) figure 2B (closed)
• Afteryouhavepushedthenozzleallthewayontothe receiver so the front end is past the groove on the receiver,thepullbackhandlewillsnapforward,nextlockthe nozzle onto the receiver.
• Pullthenozzlebackslightlytomakesureitisproperlyconnected to the receiver.
• Pullthelatchbackandrotatetheactuatorhandleupwards. see figure 3
• Todisconnect,rotatetheactuatorhandledownuntilthelatch snaps forward and locks it in the OFF position.
• Push forward on the nozzle to relieve pressure on the pullbackhandleandthedogs.
• Withyourpalmonthehandleandyourfingersonthepullbackhandle,pullittowardsyouuntilthelockingdogs lock in the OPEN position.
• Pull the nozzle off the receiver. see figure 4
• AfteryouremovethenozzlefromthereceiverthepullbackhandleshouldremainlockedintheOPENposition.
Figure 3
Figure 1
Figure 4
Figure 2A Figure 2B
FloMAX
3Flomax Diesel Fuel Nozzles
FN600BL
• Withyourpalmonthehandleandyourfingersonthepullbackhandle,pullittowardsyouandholdthepullbackhandleasyoupushthenozzleontothereceiver. see figure 1
• WiththepullbackhandleintheOPENpositionthelockingballsshouldberetracted.see figure 2
• Afteryouhavepushedthenozzleallthewayontothe receiver so the front end is past the groove on the receiver,letthepullbackhandlespringforward,pushingagainst some resistance the last ¼" inch past the groove on the receiver.
• Ifthepullbackhandledoesnotspringforward,thenpushthenosetowithin¼"fromthehexonthereceiversothatthepullbackhandlewillsnapforward.
• Pullthenozzlebackslightlytomakesureitisproperlyconnected to the receiver.
• Pullthelatchbackandrotatetheactuatorhandleupwards. see figure 3
• Todisconnect,rotatetheactuatorhandledownuntilthelatch snaps forward and locks it in the OFF position.
• Push forward on the nozzle to relieve pressure on the pullbackhandleandthelockingballs.
• Withyourpalmonthehandleandyourfingersonthepullbackhandle,pullittowardsyouandholdthepullbackasyoupullthenozzleoffthereceiver.see figure 4
• Afteryouremovethenozzlefromthereceiverletthepullbackhandlereturntoitsnormalposition.
FloMAX
Figure 4
Figure 3
Figure 1
Figure 2
• 1½" female NPT
• integratedhighflowswivel
• investment cast aluminum housing
• heat treated stainless steel wear components
• integrated sealing plug
• plug/bumperassemblygivescompletenoseseal
• anodized aluminum non-wear parts
• Delron®bushingseliminatemetal-to-metalwear
• stainlesssteeldoglatchmechanismandballlockstylesavailable
• testedto180gallonsperminute
® 2015 DVCC FloMAX PRIMER
Replacement Products available
Product details
FloMAX
Description Part #
dog latch mechanismballlockstyle
FN600FN600BL
Nozzles
Description Part #
forFN600forFN600BL
FN600B-PLUGFN600B
Sealing Plugs
Dixon800HighStreet•Chestertown,MD21620
ph800.355.1991•fx800.283.4966
dixonvalve.com