5216floetrol (Converted)-16 8/10/05 4:36 PM Page 1

Composite

C M Y CM MY CY CMY K

• Extends the ‘wet edge’ of your paint.• Provides a spray-like finish with roller or brush.• Eliminates roller marks and common streaking

and shadowing problems.• Improves spray pattern, adding that professional

look to your application.• Extends spray-gun life.• Provides a smoother, more uniform

roller applicataion.• Container is completely recyclable for

easy disposal.• Excellent for faux finishing.

HOW PAINT SHOULD BE TREATED

®

Enhances the performance of acrylic paints.

Apply with brush. Apply with roller. Apply with sprayer.

Floetrol Acrylic Paint Conditioner®

5216floetrol (Converted)-16 8/10/05 4:36 PM Page 2

Composite

C M Y CM MY CY CMY K

For more information and assistanceFREECALL 1800 226 113

THE FLOOD COMPANY AUSTRALIA4 Nelson Avenue, Padstow, NSW 2211 Australia

Phone (+61) 2 9790 5158 Fax (+61) 2 9709 2604 Email info@floodaustralia.com

www.floodaustralia.netvisit our web site...HOW PAINT SHOULD BE TREATED

®

Floetrol improves the performance of acrylicsand other water based paint to make it flow likeoil paint without the usual clean-up hassles.Floetrol saves money and assures a professionaljob every time.

Why use FloetrolWater evaporates - Floetrol does not.• Floetrol makes more paint and unlike water, Floetrol maintains

and fortifies the qualities of good paint.

• Floetrol also improves the coverage of most paints, giving exceptional value for money.

• Floetrol makes acrylics and other water based paint flow andlevel like oil based paint and enhances the paint's performancein less than ideal conditions.

• Floetrol minimises brush, lap and roller marks, an all too common problem when painting with acrylics, specially in hotor windy weather. Brush clogging is also reduced.With Floetrol, your paint job will look much better with far less effort.

• Floetrol makes cup guns last longer because it lubricates the paint and reduces tip clogging and piston freeze-up, thecause of most cup gun failures. A better spray pattern is achieved with less pressure and the gun doesn’t have towork so hard.

The world’s leading cup gun makers recommend the useof Floetrol in their spray equipment.

How to use Floetrol• Make sure the surface is clean and free from dust.

Mix paint thoroughly and start painting.

• If the paint drags, pulls or doesn’t level properly and the jobgets harder and harder, add Floetrol.

• Start by adding 10% and use up to 25%. Let the paint’s workability be your guide as to how much Floetrol thepaint needs.

TIP:When spraying with a cup gun and the paint seems to thicken, add a table spoon of water to thin the paint.For more information see the Floetrol container.

Coverage, clean up and storage• Floetrol increases coverage of most water based paint.

Clean up with soap and water

TIP:• For easy cleaning and longer life, treat your valuable brushes

and rollers with ‘Brush Stuff’ from Flood.• The Floetrol container is completely recyclable for safe and

environmentally friendly disposal.

Available Sizes:500ml, 1 litre, 4 litre, 20 litre.

Floetrol Acrylic Paint Conditioner®

Faux Finishing and Floetrol.The perfect match.Whether it’s ‘marbling’, ‘sponging’, ‘ragging’or ‘combing’, Floetrol is an essentialcomponent recommended by leading fauxfinishing experts because it extends the‘wet edge’ of the paint and gives youtime to create the look you want andcorrect the mistakes you may havemade. Environmentally friendly disposal.

Call us for your complimentary20-page Faux Finishing Guide.

© 2002 THE FLOOD COMPANY AUSTRALIA5216 FLOETROL